qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-10-04 23:36:01 +03:00
Code

ifxmips pci does not cause a hang anymore, but due to lack of antenna i get no link on the atheros card, ints are flying though

Browse Source 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9840 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
blogic 2007-12-22 19:53:18 +00:00
parent dceed6d867
commit 4a4c45e981
1 changed files with 4 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
target/linux/ifxmips/files/arch/mips/ifxmips/pci.c
View File

@ -21,6 +21,8 @@
#define PCI_ACCESS_READ 0 #define PCI_ACCESS_READ 0
#define PCI_ACCESS_WRITE 1 #define PCI_ACCESS_WRITE 1
//#define CONFIG_IFXMIPS_PCI_HW_SWAP 1
static int ifxmips_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val); static int ifxmips_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
static int ifxmips_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val); static int ifxmips_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
@ -251,7 +253,7 @@ static void __init ifxmips_pci_startup (void){
/* FPI ==> PCI IO address mapping */ /* FPI ==> PCI IO address mapping */
/* base: 0xbAE00000 == > 0xbAE00000 */ /* base: 0xbAE00000 == > 0xbAE00000 */
/* size: 2M */ /* size: 2M */
writel(0xbae00000, PCI_CR_FCI_ADDR_MAP11hg); writel(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
/* PCI ==> FPI address mapping */ /* PCI ==> FPI address mapping */
/* base: 0x0 ==> 0x0 */ /* base: 0x0 ==> 0x0 */
@ -262,7 +264,7 @@ static void __init ifxmips_pci_startup (void){
writel(0, PCI_CS_BASE_ADDR1); writel(0, PCI_CS_BASE_ADDR1);
#ifdef CONFIG_IFXMIPS_PCI_HW_SWAP #ifdef CONFIG_IFXMIPS_PCI_HW_SWAP
/* both TX and RX endian swap are enabled */ /* both TX and RX endian swap are enabled */
IFXMIPS_PCI_REG32 (PCI_CR_PCI_EOI_REG) |= 3; writel(readl(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
wmb (); wmb ();
#endif #endif
/*TODO: disable BAR2 & BAR3 - why was this in the origianl infineon code */ /*TODO: disable BAR2 & BAR3 - why was this in the origianl infineon code */
@ -280,7 +282,6 @@ static void __init ifxmips_pci_startup (void){
} }
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin){ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin){
printk("\n\n\n%s:%s[%d] %d %d\n", __FILE__, __func__, __LINE__, slot, pin);
switch (slot) { switch (slot) {
case 13: case 13:
/* IDSEL = AD29 --> USB Host Controller */ /* IDSEL = AD29 --> USB Host Controller */