Merge branch 'master' of openwrt-backfire into xburst

Conflicts:

	target/linux/x86/image/Config.in

Config.in

@@ -102,7 +102,7 @@ menu "Target Images"
 
 	source "target/linux/*/image/Config.in"
 
-	config TARGET_ROOTFS_FSPART
+	config TARGET_ROOTFS_PARTSIZE
 		int "Root filesystem partition size (in MB)"
 		depends X86_GRUB_IMAGES || TARGET_ROOTFS_EXT2FS || TARGET_rb532
 		default 48

include/image.mk

@@ -110,7 +110,7 @@ ifneq ($(CONFIG_TARGET_ROOTFS_TARGZ),)
 endif
 
 ifneq ($(CONFIG_TARGET_ROOTFS_EXT2FS),)
-  E2SIZE=$(shell echo $$(($(CONFIG_TARGET_ROOTFS_FSPART)*1024)))
+  E2SIZE=$(shell echo $$(($(CONFIG_TARGET_ROOTFS_PARTSIZE)*1024)))
 
   define Image/mkfs/ext2
 		$(STAGING_DIR_HOST)/bin/genext2fs -U -b $(E2SIZE) -N $(CONFIG_TARGET_ROOTFS_MAXINODE) -d $(TARGET_DIR)/ $(KDIR)/root.ext2

package/acx/Makefile

@@ -1,5 +1,5 @@
 # 
-# Copyright (C) 2006-2008 OpenWrt.org
+# Copyright (C) 2006-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -10,7 +10,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=acx
 PKG_VERSION:=20080210
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:=@SF/acx100

package/base-files/Makefile

@@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=base-files
-PKG_RELEASE:=43
+PKG_RELEASE:=43.1
 
 PKG_FILE_DEPENDS:=$(PLATFORM_DIR)/ $(GENERIC_PLATFORM_DIR)/base-files/
 

package/base-files/files/etc/hotplug.d/iface/10-routes

@@ -68,7 +68,36 @@ case "$ACTION" in
 	ifup)
 		include /lib/network
 		scan_interfaces
+
+		# Setup aliases
+		config_set "$INTERFACE" aliases ""
+		config_set "$INTERFACE" alias_count 0
+		config_foreach setup_interface_alias alias "$INTERFACE" "$DEVICE"
+
+		# Save alias references in state vars
+		local aliases
+		config_get aliases "$INTERFACE" aliases
+		[ -z "$aliases" ] || uci_set_state network "$INTERFACE" aliases "$aliases"
+
+		# Make ip6addr of parent iface the main address again
+		local ip6addr
+		config_get ip6addr "$INTERFACE" ip6addr
+		[ -z "$ip6addr" ] || {
+			ifconfig "$DEVICE" del "$ip6addr"
+			ifconfig "$DEVICE" add "$ip6addr"
+		}
+
+		# Setup routes
 		config_foreach "add_route" route
 		config_foreach "add_route6" route6
 	;;
+	ifdown)
+		# Bring down named aliases
+		local device=$(uci_get_state network "$INTERFACE" device)
+		local ifn
+		for ifn in $(ifconfig | sed -ne "s/^\(\($DEVICE${device:+\|$device}\|br-$INTERFACE\):[^[:space:]]\+\).*/\1/p"); do
+			ifconfig "$ifn" down
+		done
+	;;
 esac
+

package/base-files/files/etc/hotplug.d/net/10-net

@@ -11,7 +11,7 @@ addif() {
 
 	# PPP devices are configured by pppd, no need to run setup_interface here
 	case "$INTERFACE" in
-		ppp*) return 0;;
+		ppp*|3g-*) return 0;;
 		ath*) return 0;;
 		wlan*) return 0;;
 	esac
@@ -46,7 +46,7 @@ delif() {
 	for ifc in $interfaces; do
 		config_get iftype "$ifc" type
 		config_get ifs "$ifc" device
-		confdevs="$(uci get network.$ifc.ifname)"
+		confdevs="$(uci_get network.$ifc.ifname)"
 		for dev in $ifs; do
 			[ "${dev%%\.*}" = "$INTERFACE" ] && {
 				list_contains confdevs "$dev" || list_remove ifs "$dev"

package/base-files/files/etc/hotplug2-common.rules

@@ -8,7 +8,6 @@ DEVICENAME ~~ (null|full|ptmx|tty|zero|gpio|hvc) {
 DEVICENAME ~~ (tun|tap[0-9]) {
 	nothrottle
 	makedev /dev/net/%DEVICENAME% 0644
-	next
 }
 
 DEVICENAME ~~ (ppp) {

package/base-files/files/etc/init.d/network

@@ -15,6 +15,20 @@ boot() {
 		rm -f /etc/config/wireless
 		/sbin/wifi detect > /etc/config/wireless
 	}
+
+	scan_interfaces
+
+	local ifc
+	for ifc in $interfaces; do
+		local proto
+		config_get proto "$ifc" proto
+
+		local auto
+		config_get_bool auto "$ifc" auto 1
+
+		type "coldplug_interface_$proto" >/dev/null && [ "$auto" = 1 ] && \
+			coldplug_interface_$proto "$ifc"
+	done
 }
 
 start() {

package/base-files/files/lib/functions/boot.sh

@@ -32,6 +32,7 @@ find_mtd_part() {
 
 jffs2_ready () {
     mtdpart="$(find_mtd_part rootfs_data)"
+    [ -z "$mtdpart" ] && return 1
     magic=$(hexdump $mtdpart -n 4 -e '4/1 "%02x"')
     [ "$magic" != "deadc0de" ]
 }

package/base-files/files/lib/network/config.sh

@@ -66,6 +66,52 @@ add_vlan() {
 	return 1
 }
 
+# add dns entries if they are not in resolv.conf yet
+add_dns() {
+	local cfg="$1"; shift
+
+	remove_dns "$cfg"
+
+	# We may be called by pppd's ip-up which has a nonstandard umask set.
+	# Create an empty file here and force its permission to 0644, otherwise
+	# dnsmasq will not be able to re-read the resolv.conf.auto .
+	[ ! -f /tmp/resolv.conf.auto ] && {
+		touch /tmp/resolv.conf.auto
+		chmod 0644 /tmp/resolv.conf.auto
+	}
+
+	local dns
+	local add
+	for dns in "$@"; do
+		grep -qsF "nameserver $dns" /tmp/resolv.conf.auto || {
+			add="${add:+$add }$dns"
+			echo "nameserver $dns" >> /tmp/resolv.conf.auto
+		}
+	done
+
+	[ -n "$cfg" ] && {
+		uci_set_state network "$cfg" dns "$add"
+		uci_set_state network "$cfg" resolv_dns "$add"
+	}
+}
+
+# remove dns entries of the given iface
+remove_dns() {
+	local cfg="$1"
+
+	[ -n "$cfg" ] && {
+		[ -f /tmp/resolv.conf.auto ] && {
+			local dns=$(uci_get_state network "$cfg" resolv_dns)
+			for dns in $dns; do
+				sed -i -e "/^nameserver $dns$/d" /tmp/resolv.conf.auto
+			done
+		}
+
+		uci_revert_state network "$cfg" dns
+		uci_revert_state network "$cfg" resolv_dns
+	}
+}
+
 # sort the device list, drop duplicates
 sort_list() {
 	local arg="$*"
@@ -115,7 +161,18 @@ prepare_interface() {
 	config_get iftype "$config" type
 	case "$iftype" in
 		bridge)
+			local macaddr
+			config_get macaddr "$config" macaddr
 			[ -x /usr/sbin/brctl ] && {
+				# Remove IPv6 link local addr before adding the iface to the bridge
+				local llv6="$(ifconfig "$iface")"
+				case "$llv6" in
+					*fe80:*/64*)
+						llv6="${llv6#* fe80:}"
+						ifconfig "$iface" del "fe80:${llv6%% *}"
+					;;
+				esac
+
 				ifconfig "br-$config" 2>/dev/null >/dev/null && {
 					local newdevs devices
 					config_get devices "$config" device
@@ -139,7 +196,7 @@ prepare_interface() {
 					# result in another setup_interface() call, so we simply stop processing
 					# the current event at this point.
 				}
-				ifconfig "$iface" up 2>/dev/null >/dev/null
+				ifconfig "$iface" ${macaddr:+hw ether "${macaddr}"} up 2>/dev/null >/dev/null
 				return 1
 			}
 		;;
@@ -181,13 +238,7 @@ setup_interface_static() {
 	[ -z "$ip6addr" ] || $DEBUG ifconfig "$iface" add "$ip6addr"
 	[ -z "$gateway" ] || $DEBUG route add default gw "$gateway" dev "$iface"
 	[ -z "$ip6gw" ] || $DEBUG route -A inet6 add default gw "$ip6gw" dev "$iface"
-	[ -z "$dns" ] || {
+	[ -z "$dns" ] || add_dns "$config" $dns
-		for ns in $dns; do
-			grep "$ns" /tmp/resolv.conf.auto 2>/dev/null >/dev/null || {
-				echo "nameserver $ns" >> /tmp/resolv.conf.auto
-			}
-		done
-	}
 
 	config_get type "$config" TYPE
 	[ "$type" = "alias" ] && return 0
@@ -204,6 +255,25 @@ setup_interface_alias() {
 	config_get cfg "$config" interface
 	[ "$parent" == "$cfg" ] || return 0
 
+	# parent device and ifname
+	local p_device p_type
+	config_get p_device "$cfg" device
+	config_get p_type   "$cfg" type
+
+	# select alias ifname
+	local layer use_iface
+	config_get layer "$config" layer 2
+	case "$layer:$p_type" in
+		# layer 3: e.g. pppoe-wan or pptp-vpn
+		3:*)      use_iface="$iface" ;;
+
+		# layer 2 and parent is bridge: e.g. br-wan
+		2:bridge) use_iface="br-$cfg" ;;
+
+		# layer 1: e.g. eth0 or ath0
+		*)        use_iface="$p_device" ;;
+	esac
+
 	# alias counter
 	local ctr
 	config_get ctr "$parent" alias_count 0
@@ -216,14 +286,14 @@ setup_interface_alias() {
 	append list "$config"
 	config_set "$parent" aliases "$list"
 
-	iface="$iface:$ctr"
+	use_iface="$use_iface:$ctr"
-	set_interface_ifname "$config" "$iface"
+	set_interface_ifname "$config" "$use_iface"
 
 	local proto
 	config_get proto "$config" proto "static"
 	case "${proto}" in
 		static)
-			setup_interface_static "$iface" "$config"
+			setup_interface_static "$use_iface" "$config"
 		;;
 		*)
 			echo "Unsupported type '$proto' for alias config '$config'"
@@ -233,102 +303,110 @@ setup_interface_alias() {
 }
 
 setup_interface() {
-	local iface_main="$1"
+	local iface="$1"
 	local config="$2"
 	local proto="$3"
 	local vifmac="$4"
-	local ip6addr_main=
 
 	[ -n "$config" ] || {
-		config=$(find_config "$iface_main")
+		config=$(find_config "$iface")
 		[ "$?" = 0 ] || return 1
 	}
 
-	prepare_interface "$iface_main" "$config" "$vifmac" || return 0
+	prepare_interface "$iface" "$config" "$vifmac" || return 0
 
-	[ "$iface_main" = "br-$config" ] && {
+	[ "$iface" = "br-$config" ] && {
 		# need to bring up the bridge and wait a second for
 		# it to switch to the 'forwarding' state, otherwise
 		# it will lose its routes...
-		ifconfig "$iface_main" up
+		ifconfig "$iface" up
 		sleep 1
 	}
 
 	# Interface settings
-	grep "$iface_main:" /proc/net/dev > /dev/null && {
+	grep "$iface:" /proc/net/dev > /dev/null && {
 		local mtu macaddr
 		config_get mtu "$config" mtu
 		config_get macaddr "$config" macaddr
-		[ -n "$macaddr" ] && $DEBUG ifconfig "$iface_main" down
+		[ -n "$macaddr" ] && $DEBUG ifconfig "$iface" down
-		$DEBUG ifconfig "$iface_main" ${macaddr:+hw ether "$macaddr"} ${mtu:+mtu $mtu} up
+		$DEBUG ifconfig "$iface" ${macaddr:+hw ether "$macaddr"} ${mtu:+mtu $mtu} up
 	}
-	set_interface_ifname "$config" "$iface_main"
+	set_interface_ifname "$config" "$iface"
 
-	pidfile="/var/run/$iface_main.pid"
 	[ -n "$proto" ] || config_get proto "$config" proto
 	case "$proto" in
 		static)
-			config_get ip6addr_main "$config" ip6addr
+			setup_interface_static "$iface" "$config"
-			setup_interface_static "$iface_main" "$config"
 		;;
 		dhcp)
+			local lockfile="/var/lock/dhcp-$iface"
+			lock "$lockfile"
+
 			# prevent udhcpc from starting more than once
-			lock "/var/lock/dhcp-$iface_main"
+			local pidfile="/var/run/dhcp-${iface}.pid"
 			local pid="$(cat "$pidfile" 2>/dev/null)"
-			if [ -d "/proc/$pid" ] && grep udhcpc "/proc/${pid}/cmdline" >/dev/null 2>/dev/null; then
+			if [ -d "/proc/$pid" ] && grep -qs udhcpc "/proc/${pid}/cmdline"; then
-				lock -u "/var/lock/dhcp-$iface_main"
+				lock -u "$lockfile"
 			else
-				local ipaddr netmask hostname proto1 clientid
+				local ipaddr netmask hostname proto1 clientid broadcast
 				config_get ipaddr "$config" ipaddr
 				config_get netmask "$config" netmask
 				config_get hostname "$config" hostname
 				config_get proto1 "$config" proto
 				config_get clientid "$config" clientid
+				config_get_bool broadcast "$config" broadcast 0
 
 				[ -z "$ipaddr" ] || \
-					$DEBUG ifconfig "$iface_main" "$ipaddr" ${netmask:+netmask "$netmask"}
+					$DEBUG ifconfig "$iface" "$ipaddr" ${netmask:+netmask "$netmask"}
 
 				# don't stay running in background if dhcp is not the main proto on the interface (e.g. when using pptp)
 				local dhcpopts
 				[ ."$proto1" != ."$proto" ] && dhcpopts="-n -q"
-				$DEBUG eval udhcpc -t 0 -i "$iface_main" ${ipaddr:+-r $ipaddr} ${hostname:+-H $hostname} ${clientid:+-c $clientid} -b -p "$pidfile" ${dhcpopts:- -O rootpath -R &}
+				[ "$broadcast" = 1 ] && broadcast="-O broadcast" || broadcast=
-				lock -u "/var/lock/dhcp-$iface_main"
+
+				$DEBUG eval udhcpc -t 0 -i "$iface" \
+					${ipaddr:+-r $ipaddr} \
+					${hostname:+-H $hostname} \
+					${clientid:+-c $clientid} \
+					-b -p "$pidfile" $broadcast \
+					${dhcpopts:- -O rootpath -R &}
+
+				lock -u "$lockfile"
 			fi
 		;;
 		none)
-			setup_interface_none "$iface_main" "$config"
+			setup_interface_none "$iface" "$config"
 		;;
 		*)
 			if ( eval "type setup_interface_$proto" ) >/dev/null 2>/dev/null; then
-				eval "setup_interface_$proto '$iface_main' '$config' '$proto'"
+				eval "setup_interface_$proto '$iface' '$config' '$proto'"
 			else
 				echo "Interface type $proto not supported."
 				return 1
 			fi
 		;;
 	esac
-	[ "$proto" = none ] || {
-		for ifn in `ifconfig | grep "^$iface_main:" | awk '{print $1}'`; do
-			ifconfig "$ifn" down
-		done
-	}
-
-	local aliases
-	config_set "$config" aliases ""
-	config_set "$config" alias_count 0
-	config_foreach setup_interface_alias alias "$config" "$iface_main"
-	config_get aliases "$config" aliases
-	[ -z "$aliases" ] || uci_set_state network "$config" aliases "$aliases"
-
-	# put the ip6addr back to the beginning to become the main ip again
-	[ -z "$ip6addr_main" ] || {
-		$DEBUG ifconfig "$iface_main" del "$ip6addr_main"
-		$DEBUG ifconfig "$iface_main" add "$ip6addr_main"
-	}
 }
 
 stop_interface_dhcp() {
 	local config="$1"
+
+	local ifname
+	config_get ifname "$config" ifname
+
+	local lock="/var/lock/dhcp-${ifname}"
+	[ -f "$lock" ] && lock -u "$lock"
+
+	remove_dns "$config"
+
+	local pidfile="/var/run/dhcp-${ifname}.pid"
+	local pid="$(cat "$pidfile" 2>/dev/null)"
+	[ -d "/proc/$pid" ] && {
+		grep -qs udhcpc "/proc/$pid/cmdline" && kill -TERM $pid && \
+			while grep -qs udhcpc "/proc/$pid/cmdline"; do sleep 1; done
+		rm -f "$pidfile"
+	}
+
 	uci -P /var/state revert "network.$config"
 }
 

package/base-files/files/sbin/ifdown

@@ -29,28 +29,6 @@ config_get iface "$cfg" device
 # call interface stop handler
 ( type "stop_interface_$proto" ) >/dev/null 2>/dev/null && eval "stop_interface_$proto '$cfg'"
 
-# make sure all locks are removed
-for lock in "/var/lock/dhcp-$iface" "/var/lock/ppp-$iface"; do
-	[ -f "$lock" ] && {
-		lock -u "$lock"
-		sleep 1
-	}
-done
-
-# kill active ppp daemon and other processes
-config_get ifname "$cfg" ifname
-pids="$(head -n1 -q /var/run/${ifname}.pid /var/run/ppp-${cfg}.pid 2>/dev/null)"
-for pid in $pids; do 
-	[ -d "/proc/$pid" ] && {
-		kill $pid
-		[ -d "/proc/$pid" ] && {
-			sleep 1
-			kill -9 $pid 2>/dev/null >/dev/null
-		}
-	}
-done
-rm -f /var/run/${ifname}.pid /var/run/ppp-${cfg}.pid
-
 config_get ifname "$cfg" ifname
 config_get device "$cfg" device
 
@@ -62,6 +40,9 @@ done
 config_get iftype "$cfg" type
 [ "bridge" = "$iftype" ] && brctl delbr "$ifname" >/dev/null 2>/dev/null
 
+# remove the interface's dns entries
+remove_dns "$cfg"
+
 # remove the interface's network state
 uci_revert_state network "$1"
 

package/base-files/files/usr/share/udhcpc/default.script

@@ -11,11 +11,6 @@ change_state () {
 	uci_set_state "$1" "$2" "$3" "$4"
 }
 
-uci_get() {
-	[ -n "$ifc" ] || return
-	uci -P /dev/null get "$1" 2>/dev/null
-}
-
 setup_interface () {
 	local old_ip
 	local old_broadcast
@@ -144,21 +139,21 @@ setup_interface () {
 	}
 
 	# DNS
-	config_get old_dns "$ifc" dns
+	old_dns=$(uci_get_state network "$ifc" dns)
+	old_domain=$(uci_get_state network "$ifc" dnsdomain)
 	user_dns=$(uci_get "network.$ifc.dns")
 	[ -n "$user_dns" ] && dns="$user_dns"
 
-	[ -n "$dns" ] && [ ! -s "${RESOLV_CONF}" -o "$dns" != "$old_dns" ] && {
+	[ -n "$dns" ] && [ "$dns" != "$old_dns" -o -n "$user_dns" ] && {
 		echo "udhcpc: setting dns servers: $dns"
-		echo -n > "${RESOLV_CONF}.tmp"
+		add_dns "$ifc" $dns
-		for i in $dns ; do
-			echo "nameserver $i" >> "${RESOLV_CONF}.tmp"
-		done
-		${domain:+echo search $domain} >> "${RESOLV_CONF}.tmp"
-		mv "${RESOLV_CONF}.tmp" "$RESOLV_CONF"
 
+		[ -n "$domain" ] && [ "$domain" != "$old_domain" ] && {
+			echo "udhcpc: setting dns domain: $domain"
+			sed -i -e "${old_domain:+/^search $old_domain$/d; }/^search $domain$/d" "${RESOLV_CONF}"
+			echo "search $domain" >> "${RESOLV_CONF}"
 			change_state network "$ifc" dnsdomain "$domain"
-		change_state network "$ifc" dns "$dns"
+		}
 	}
 
 	[ -n "$ifc" ] || return

package/block-extroot/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2009 OpenWrt.org
+# Copyright (C) 2009-2010 OpenWrt.org
 # Copyright (C) 2010 Vertical Communications
 #
 # This is free software, licensed under the GNU General Public License v2.
@@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=block-extroot
 PKG_VERSION:=0.0.1
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 

package/broadcom-diag/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2006-2009 OpenWrt.org
+# Copyright (C) 2006-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=broadcom-diag
-PKG_RELEASE:=6
+PKG_RELEASE:=7
 
 include $(INCLUDE_DIR)/package.mk
 

package/broadcom-wl/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2006-2009 OpenWrt.org
+# Copyright (C) 2006-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -10,7 +10,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=broadcom-wl
 PKG_VERSION:=4.150.10.5.3
-PKG_RELEASE:=6
+PKG_RELEASE:=7
 WLC_VERSION:=0.2
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2

package/busybox/files/cron

@@ -3,7 +3,7 @@
 START=50
 
 start () {
-	loglevel=$(/sbin/uci get "system.@system[0].cronloglevel" 2>/dev/null)
+	loglevel=$(uci_get "system.@system[0].cronloglevel")
 	[ -z "$(ls /etc/crontabs/)" ] && exit 1
 	mkdir -p /var/spool/cron
 	ln -s /etc/crontabs /var/spool/cron/ 2>/dev/null

package/comgt/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=comgt
 PKG_VERSION:=0.32
-PKG_RELEASE:=1
+PKG_RELEASE:=3
 
 PKG_SOURCE:=$(PKG_NAME).$(PKG_VERSION).tgz
 PKG_SOURCE_URL:=@SF/comgt

package/comgt/files/3g.iface

@@ -6,15 +6,9 @@ config_get proto "$INTERFACE" proto
 	config_get iface "$INTERFACE" ifname
 	case "$ACTION" in
 		ifup)
-			iptables -I LAN_ACCEPT 1 -i "$iface" -j RETURN
-			iptables -A FORWARD -o "$iface" -j ACCEPT
-			iptables -t nat -A POSTROUTING -o "$iface" -j MASQUERADE 
 			set_3g_led 1 1 0
 		;;
 		ifdown)
-			iptables -D LAN_ACCEPT -i "$iface" -j RETURN
-			iptables -D FORWARD -o "$iface" -j ACCEPT
-			iptables -t nat -D POSTROUTING -o "$iface" -j MASQUERADE 
 			set_3g_led 0 0 0
 		;;
 	esac

package/comgt/files/3g.sh

@@ -9,8 +9,6 @@ set_3g_led() {
 
 scan_3g() {
 	local device
-
-	scan_ppp "$@"
 	config_get device "$1" device
 
 	# try to figure out the device if it's invalid
@@ -24,6 +22,7 @@ scan_3g() {
 	}
 
 	# enable 3G with the 3G button by default
+	local button
 	config_get button "$1" button
 	[ -z "$button" ] && {
 		config_set "$1" button 1
@@ -31,6 +30,7 @@ scan_3g() {
 }
 
 stop_interface_3g() {
+	stop_interface_ppp "$1"
 	set_3g_led 0 0 0
 	killall gcom >/dev/null 2>/dev/null
 }
@@ -40,7 +40,10 @@ setup_interface_3g() {
 	local config="$2"
 	local chat="/etc/chatscripts/3g.chat"
 
+	local device
 	config_get device "$config" device
+
+	local maxwait
 	config_get maxwait "$config" maxwait
 	maxwait=${maxwait:-20}
 	while [ ! -e "$device" -a $maxwait -gt 0 ];do # wait for driver loading to catch up
@@ -52,9 +55,16 @@ setup_interface_3g() {
 		/sbin/insmod $module 2>&- >&-
 	done
 
+	local apn
 	config_get apn "$config" apn
+
+	local service
 	config_get service "$config" service
+
+	local pincode
 	config_get pincode "$config" pincode
+
+	local mtu
 	config_get mtu "$config" mtu
 
 	set_3g_led 1 0 1

package/compcache/Makefile

@@ -11,7 +11,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=compcache
 PKG_VERSION:=0.6.2
-PKG_RELEASE:=$(PKG_VERSION)-1
+PKG_RELEASE:=1
 PKG_SOURCE_URL:=http://compcache.googlecode.com/files/
 PKG_MD5SUM:=27aec78dc50e34fb800c74e879057743
 

package/ifx-tapidemo/Makefile

@@ -1,10 +1,9 @@
 #
-# Copyright (C) 2008 OpenWrt.org
+# Copyright (C) 2008-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
-# $Id: $
 
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk

package/ifxmips-dsl-api/Makefile

@@ -12,6 +12,7 @@ include $(INCLUDE_DIR)/kernel.mk
 PKG_NAME:=ifxmips-dsl-api
 PKG_BASE_NAME:=drv_dsl_cpe_api_danube
 PKG_VERSION:=3.24.4.4
+PKG_RELEASE:=1
 PKG_SOURCE:=$(PKG_BASE_NAME)-$(PKG_VERSION).tar.gz
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/drv_dsl_cpe_api-$(PKG_VERSION)
 PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources/

package/ifxmips-dsl-control/Makefile

@@ -11,6 +11,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_BASE_NAME:=dsl_cpe_control_danube
 PKG_VERSION:=3.24.4.4
+PKG_RELEASE:=1
 PKG_SOURCE:=$(PKG_BASE_NAME)-$(PKG_VERSION).tar.gz
 PKG_BUILD_DIR:=$(BUILD_DIR)/dsl_cpe_control-$(PKG_VERSION)
 PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources/

package/ifxos/Makefile

@@ -1,10 +1,9 @@
 #
-# Copyright (C) 2009 OpenWrt.org
+# Copyright (C) 2009-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
-# $Id: $
 
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk

package/kernel/modules/netfilter.mk

@@ -236,7 +236,7 @@ $(call KernelPackage/ipt/Depends,)
   FILES:= \
 	$(LINUX_DIR)/drivers/net/imq.$(LINUX_KMOD_SUFFIX) \
 	$(foreach mod,$(IPT_IMQ-m),$(LINUX_DIR)/net/$(mod).$(LINUX_KMOD_SUFFIX))
-  AUTOLOAD:=$(call AutoLoad,45,$(notdir \
+  AUTOLOAD:=$(call AutoLoad,46,$(notdir \
 	imq \
 	$(IPT_IMQ-m) \
   ))

package/mac80211/Makefile

@@ -10,12 +10,12 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=mac80211
 
-PKG_VERSION:=2010-04-28
+PKG_VERSION:=2010-05-24
 PKG_RELEASE:=1
 PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources
 #	http://www.orbit-lab.org/kernel/compat-wireless-2.6/2010/11 \
 #	http://wireless.kernel.org/download/compat-wireless-2.6
-PKG_MD5SUM:=4b8c23ac7f33af7556034635af744c67
+PKG_MD5SUM:=3d465dc6e0213964d0349f61c485817f
 
 PKG_SOURCE:=compat-wireless-$(PKG_VERSION).tar.bz2
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION)
@@ -550,7 +550,7 @@ endef
 ifneq ($(CONFIG_B43_EXPERIMENTAL),)
   PKG_B43_FWV4_NAME:=broadcom-wl
   PKG_B43_FWV4_VERSION:=4.178.10.4
-  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl.o
+  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o
   PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
   PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
   PKG_B43_FWV4_MD5SUM:=14477e8cbbb91b11896affac9b219fdb
@@ -578,7 +578,7 @@ PKG_B43_FWV3_SOURCE:=$(PKG_B43_FWV3_NAME)-$(PKG_B43_FWV3_VERSION).o
 PKG_B43_FWV3_SOURCE_URL:=http://downloads.openwrt.org/sources/
 PKG_B43_FWV3_MD5SUM:=e08665c5c5b66beb9c3b2dd54aa80cb3
 
-ifneq ($(CONFIG_B43_OPENFIRMWARE),)
+ifeq ($(CONFIG_B43_OPENFIRMWARE),y)
   PKG_B43_FWCUTTER_NAME:=b43-fwcutter
   PKG_B43_FWCUTTER_VERSION:=3e69531aa65b8f664a0ab00dfc3e2eefeb0cb417
   PKG_B43_FWCUTTER_SOURCE:=$(PKG_B43_FWCUTTER_NAME)-$(PKG_B43_FWCUTTER_VERSION).tar.bz2
@@ -588,11 +588,11 @@ ifneq ($(CONFIG_B43_OPENFIRMWARE),)
   PKG_B43_FWCUTTER_OBJECT:=$(PKG_B43_FWCUTTER_NAME)-$(PKG_B43_FWCUTTER_VERSION)/fwcutter/
 else
   PKG_B43_FWCUTTER_NAME:=b43-fwcutter
-  PKG_B43_FWCUTTER_VERSION:=012
+  PKG_B43_FWCUTTER_VERSION:=013
   PKG_B43_FWCUTTER_SOURCE:=$(PKG_B43_FWCUTTER_NAME)-$(PKG_B43_FWCUTTER_VERSION).tar.bz2
   PKG_B43_FWCUTTER_PROTO:=default
   PKG_B43_FWCUTTER_SOURCE_URL:=http://bu3sch.de/b43/fwcutter/
-  PKG_B43_FWCUTTER_MD5SUM:=69eadf67b459f313a8d6b37aaabef96c
+  PKG_B43_FWCUTTER_MD5SUM:=3547ec6c474ac1bc2c4a5bb765b791a4
   PKG_B43_FWCUTTER_SUBDIR:=b43-fwcutter-$(PKG_B43_FWCUTTER_VERSION)
   PKG_B43_FWCUTTER_OBJECT:=$(PKG_B43_FWCUTTER_NAME)-$(PKG_B43_FWCUTTER_VERSION)/
 endif
@@ -644,7 +644,7 @@ define KernelPackage/b43/config
 
 	choice
 		prompt "b43 firmware version"
-		default B43_EXPERIMENTAL
+		default B43_STABLE
 		help
 		  This option allows you to select the version of the b43 firmware.
 
@@ -773,14 +773,13 @@ endef
 BUILDFLAGS:= \
 	-I$(PKG_BUILD_DIR)/include \
 	$(foreach opt,$(CONFOPTS),-DCONFIG_$(opt)) \
-	$(if $(CONFIG_PCI),-DCONFIG_B43_PCI_AUTOSELECT -DCONFIG_B43_PCICORE_AUTOSELECT -DCONFIG_SSB_DRIVER_PCICORE_POSSIBLE -DCONFIG_SSB_DRIVER_PCICORE) \
+	$(if $(CONFIG_PCI),-DCONFIG_B43_PCI_AUTOSELECT -DCONFIG_B43_PCICORE_AUTOSELECT) \
-	$(if $(CONFIG_PCI),-DCONFIG_SSB_PCIHOST_POSSIBLE -DCONFIG_SSB_PCIHOST) \
-	$(if $(CONFIG_PCI),-DCONFIG_SSB_SPROM) \
 	$(if $(CONFIG_LEDS_TRIGGERS), -DCONFIG_MAC80211_LEDS -DCONFIG_LEDS_TRIGGERS -DCONFIG_B43_LEDS -DCONFIG_B43LEGACY_LEDS -DCONFIG_AR9170_LEDS) \
 	-DCONFIG_B43_HWRNG -DCONFIG_B43LEGACY_HWRNG \
 	$(if $(CONFIG_PACKAGE_MAC80211_DEBUGFS),-DCONFIG_MAC80211_DEBUGFS -DCONFIG_ATH9K_DEBUGFS) \
 	$(if $(CONFIG_PACKAGE_ATH_DEBUG),-DCONFIG_ATH_DEBUG) \
 	-D__CONFIG_MAC80211_RC_DEFAULT=minstrel \
+	-DCONFIG_MAC80211_RC_MINSTREL_HT \
 	$(if $(CONFIG_ATH_USER_REGD),-DATH_USER_REGD=1) \
 	$(if $(CONFIG_PACKAGE_ATH9K_USE_MINSTREL),-DATH9K_USE_MINSTREL) \
 	$(if $(CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS),-DCONFIG_RT2X00_LIB_DEBUGFS) \
@@ -808,10 +807,6 @@ MAKE_OPTS:= \
 	CONFIG_B43_PCMCIA=n CONFIG_B43_PIO=n \
 	CONFIG_B43_PCI_AUTOSELECT=$(if $(CONFIG_PCI),y) \
 	CONFIG_B43_PCICORE_AUTOSELECT=$(if $(CONFIG_PCI),y) \
-	CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=$(if $(CONFIG_PCI),y) \
-	CONFIG_SSB_DRIVER_PCICORE=$(if $(CONFIG_PCI),y) \
-	CONFIG_SSB_PCIHOST_POSSIBLE=$(if $(CONFIG_PCI),y) \
-	CONFIG_SSB_PCIHOST=$(if $(CONFIG_PCI),y) \
 	CONFIG_B43LEGACY_LEDS=$(CONFIG_LEDS_TRIGGERS) \
 	CONFIG_B43_LEDS=$(CONFIG_LEDS_TRIGGERS) \
 	CONFIG_B43_HWRNG=$(if $(CONFIG_HW_RANDOM),y) \
@@ -883,6 +878,7 @@ MAKE_OPTS:= \
 	CONFIG_AR9170_LEDS=$(CONFIG_LEDS_TRIGGERS) \
 	CONFIG_IWM= \
 	CONFIG_ATH9K_HTC= \
+	CONFIG_MAC80211_RC_MINSTREL_HT=y \
 	MADWIFI= \
 	OLD_IWL= \
 	KLIB_BUILD="$(LINUX_DIR)" \
@@ -993,7 +989,7 @@ define Build/b43-common
 	$(MAKE) -C "$(PKG_BUILD_DIR)/$(PKG_B43_FWCUTTER_OBJECT)" \
 		CFLAGS="-I$(STAGING_DIR_HOST)/include -include endian.h"
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/$(PKG_B43_FWCUTTER_OBJECT)/b43-fwcutter $(STAGING_DIR_HOST)/bin/
-ifneq ($(CONFIG_B43_OPENFIRMWARE),)
+ifeq ($(CONFIG_B43_OPENFIRMWARE),y)
 	$(INSTALL_DIR) $(STAGING_DIR_HOST)/bin/
 	$(MAKE) -C "$(PKG_BUILD_DIR)/$(PKG_B43_FWCUTTER_SUBDIR)/assembler/"
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/$(PKG_B43_FWCUTTER_SUBDIR)/assembler/b43-asm $(STAGING_DIR_HOST)/bin/
@@ -1005,20 +1001,20 @@ endef
 define KernelPackage/b43/install
 	rm -rf $(1)/lib/firmware/
 	$(call Build/b43-common)
-ifneq ($(CONFIG_B43_OPENFIRMWARE),)
+ifeq ($(CONFIG_B43_OPENFIRMWARE),y)
 	tar xzf "$(DL_DIR)/$(PKG_B43_FWV4_SOURCE)" -C "$(PKG_BUILD_DIR)"
 else
 	tar xjf "$(DL_DIR)/$(PKG_B43_FWV4_SOURCE)" -C "$(PKG_BUILD_DIR)"
 endif
 	$(INSTALL_DIR) $(1)/lib/firmware/
-ifneq ($(CONFIG_B43_OPENFIRMWARE),)
+ifeq ($(CONFIG_B43_OPENFIRMWARE),y)
 	$(MAKE) -C "$(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/"
 	$(INSTALL_DIR) $(1)/lib/firmware/b43-open/
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/ucode5.fw $(1)/lib/firmware/b43-open/ucode5.fw
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/b0g0bsinitvals5.fw $(1)/lib/firmware/b43-open/b0g0bsinitvals5.fw
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/b0g0initvals5.fw $(1)/lib/firmware/b43-open/b0g0initvals5.fw
 else
-	b43-fwcutter --unsupported -w $(1)/lib/firmware/ $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)
+	b43-fwcutter -w $(1)/lib/firmware/ $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)
 endif
 ifneq ($(CONFIG_B43_FW_SQUASH),)
 	b43-fwsquash.py "$(CONFIG_B43_FW_SQUASH_PHYTYPES)" "$(CONFIG_B43_FW_SQUASH_COREREVS)" "$(1)/lib/firmware/b43"

package/mac80211/patches/002-disable_rfkill.patch

@@ -9,7 +9,7 @@
  
  ifeq ($(CONFIG_MAC80211),y)
  $(error "ERROR: you have MAC80211 compiled into the kernel, CONFIG_MAC80211=y, as such you cannot replace its mac80211 driver. You need this set to CONFIG_MAC80211=m. If you are using Fedora upgrade your kernel as later version should this set as modular. For further information on Fedora see https://bugzilla.redhat.com/show_bug.cgi?id=470143. If you are using your own kernel recompile it and make mac80211 modular")
-@@ -481,8 +481,8 @@ endif
+@@ -483,8 +483,8 @@ endif
  # We need the backported rfkill module on kernel < 2.6.31.
  # In more recent kernel versions use the in kernel rfkill module.
  ifdef CONFIG_COMPAT_KERNEL_31

package/mac80211/patches/005-disable_ssb_build.patch

@@ -1,6 +1,6 @@
 --- a/Makefile
 +++ b/Makefile
-@@ -28,7 +28,7 @@ obj-$(CONFIG_COMPAT_WIRELESS_MODULES) +=
+@@ -30,7 +30,7 @@ obj-$(CONFIG_COMPAT_WIRELESS_MODULES) +=
  obj-$(CONFIG_COMPAT_NET_USB_MODULES) += drivers/net/usb/
  
  obj-$(CONFIG_COMPAT_NETWORK_MODULES) += drivers/net/
@@ -9,3 +9,43 @@
  endif
  
  obj-$(CONFIG_COMPAT_BLUETOOTH) += net/bluetooth/
+--- a/config.mk
++++ b/config.mk
+@@ -9,7 +9,6 @@ ifeq ($(wildcard $(KLIB_BUILD)/.config),
+  CONFIG_PCI=y
+  CONFIG_USB=y
+  CONFIG_PCMCIA=y
+- CONFIG_SSB=m
+ else
+ include $(KLIB_BUILD)/.config
+ endif
+@@ -239,21 +238,6 @@ CONFIG_IPW2200_QOS=y
+ #
+ # % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
+ 
+-ifneq ($(CONFIG_SSB),)
+-# Sonics Silicon Backplane
+-CONFIG_SSB_SPROM=y
+-# CONFIG_SSB_DEBUG=y
+-
+-CONFIG_SSB_BLOCKIO=y
+-CONFIG_SSB_PCIHOST=y
+-CONFIG_SSB_B43_PCI_BRIDGE=y
+-ifneq ($(CONFIG_PCMCIA),)
+-CONFIG_SSB_PCMCIAHOST=y
+-endif
+-# CONFIG_SSB_DEBUG=y
+-CONFIG_SSB_DRIVER_PCICORE=y
+-endif
+-
+ CONFIG_P54_PCI=m
+ 
+ # CONFIG_B44=m
+@@ -413,7 +397,6 @@ endif # end of SPI driver list
+ 
+ ifneq ($(CONFIG_MMC),)
+ 
+-CONFIG_SSB_SDIOHOST=y
+ CONFIG_B43_SDIO=y
+ CONFIG_WL1251_SDIO=m
+ 

package/mac80211/patches/007-remove_misc_drivers.patch

@@ -1,6 +1,6 @@
 --- a/config.mk
 +++ b/config.mk
-@@ -286,10 +286,10 @@ endif
+@@ -270,10 +270,10 @@ endif
  CONFIG_MWL8K=m
  
  # Ethernet drivers go here
@@ -15,7 +15,7 @@
  
  CONFIG_HERMES=m
  CONFIG_HERMES_CACHE_FW_ON_INIT=y
-@@ -342,10 +342,10 @@ CONFIG_USB_NET_COMPAT_RNDIS_HOST=n
+@@ -326,10 +326,10 @@ CONFIG_USB_NET_COMPAT_RNDIS_HOST=n
  CONFIG_USB_NET_COMPAT_RNDIS_WLAN=n
  CONFIG_USB_NET_COMPAT_CDCETHER=n
  else

package/mac80211/patches/009-remove_mac80211_module_dependence.patch

@@ -1,6 +1,6 @@
 --- a/config.mk
 +++ b/config.mk
-@@ -43,21 +43,6 @@ $(error "ERROR: Your 2.6.27 kernel has C
+@@ -42,21 +42,6 @@ $(error "ERROR: Your 2.6.27 kernel has C
  endif
  endif
  

package/mac80211/patches/010-no_pcmcia.patch

@@ -6,10 +6,10 @@
   CONFIG_USB=y
 - CONFIG_PCMCIA=y
 +# CONFIG_PCMCIA=y
-  CONFIG_SSB=m
  else
  include $(KLIB_BUILD)/.config
-@@ -181,7 +181,7 @@ CONFIG_B43=m
+ endif
+@@ -180,7 +180,7 @@ CONFIG_B43=m
  CONFIG_B43_HWRNG=y
  CONFIG_B43_PCI_AUTOSELECT=y
  ifneq ($(CONFIG_PCMCIA),)
@@ -18,12 +18,3 @@
  endif
  CONFIG_B43_LEDS=y
  CONFIG_B43_PHY_LP=y
-@@ -233,7 +233,7 @@ CONFIG_SSB_BLOCKIO=y
- CONFIG_SSB_PCIHOST=y
- CONFIG_SSB_B43_PCI_BRIDGE=y
- ifneq ($(CONFIG_PCMCIA),)
--CONFIG_SSB_PCMCIAHOST=y
-+# CONFIG_SSB_PCMCIAHOST=y
- endif
- # CONFIG_SSB_DEBUG=y
- CONFIG_SSB_DRIVER_PCICORE=y

package/mac80211/patches/011-no_sdio.patch

@@ -1,12 +1,10 @@
 --- a/config.mk
 +++ b/config.mk
-@@ -396,8 +396,8 @@ endif # end of SPI driver list
+@@ -382,7 +382,7 @@ endif # end of SPI driver list
  
  ifneq ($(CONFIG_MMC),)
  
--CONFIG_SSB_SDIOHOST=y
 -CONFIG_B43_SDIO=y
-+# CONFIG_SSB_SDIOHOST=y
 +# CONFIG_B43_SDIO=y
  CONFIG_WL1251_SDIO=m
  

package/mac80211/patches/013-disable_b43_nphy.patch

@@ -1,6 +1,6 @@
 --- a/config.mk
 +++ b/config.mk
-@@ -185,7 +185,7 @@ ifneq ($(CONFIG_PCMCIA),)
+@@ -184,7 +184,7 @@ ifneq ($(CONFIG_PCMCIA),)
  endif
  CONFIG_B43_LEDS=y
  CONFIG_B43_PHY_LP=y

package/mac80211/patches/015-remove-rt2x00-options.patch

@@ -1,6 +1,6 @@
 --- a/config.mk
 +++ b/config.mk
-@@ -248,12 +248,12 @@ CONFIG_RTL8180=m
+@@ -232,12 +232,12 @@ CONFIG_RTL8180=m
  
  CONFIG_ADM8211=m
  
@@ -15,7 +15,7 @@
  # CONFIG_RT2800PCI_RT30XX=y
  # CONFIG_RT2800PCI_RT35XX=y
  # CONFIG_RT2800PCI_SOC=y
-@@ -355,7 +355,7 @@ CONFIG_RT2800USB=m
+@@ -339,7 +339,7 @@ CONFIG_RT2800USB=m
  # CONFIG_RT2800USB_RT35XX=y
  # CONFIG_RT2800USB_UNKNOWN=y
  endif

package/mac80211/patches/100-disable_pcmcia_compat.patch

@@ -53,7 +53,7 @@
  #include <pcmcia/cs_types.h>
  #include <pcmcia/cistpl.h>
  #include <pcmcia/ds.h>
-@@ -70,9 +70,9 @@ static inline struct sk_buff *netdev_all
+@@ -67,9 +67,9 @@ static inline struct sk_buff *netdev_all
  	return skb;
  }
  

package/mac80211/patches/110-disable_usb_compat.patch

@@ -11,8 +11,8 @@
  {
 --- a/compat/compat-2.6.29.c
 +++ b/compat/compat-2.6.29.c
-@@ -16,7 +16,7 @@
+@@ -50,7 +50,7 @@ void netdev_attach_ops(struct net_device
- #include <linux/etherdevice.h>
+ EXPORT_SYMBOL(netdev_attach_ops);
  
  #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23))
 -#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)

package/mac80211/patches/120-compat_rcu_dereference.patch

@@ -1,11 +0,0 @@
---- a/include/linux/compat-2.6.34.h
-+++ b/include/linux/compat-2.6.34.h
-@@ -197,6 +197,8 @@ do {							\
-  */
- #define sysfs_bin_attr_init(bin_attr) sysfs_attr_init(&(bin_attr)->attr)
- 
-+#define rcu_dereference_check(p, c) rcu_dereference(p)
-+
- #endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34)) */
- 
- #endif /* LINUX_26_34_COMPAT_H */

package/mac80211/patches/130-tracepoint_include_linux_version_h.patch

@@ -1,11 +0,0 @@
---- a/include/linux/tracepoint.h
-+++ b/include/linux/tracepoint.h
-@@ -3,6 +3,8 @@
- 
- #include <linux/version.h>
- 
-+#include <linux/version.h>
-+
- #if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27))
- #include_next <linux/tracepoint.h>
- #endif /* (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27)) */

package/mac80211/patches/201-ath5k-WAR-for-AR71xx-PCI-bug.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath5k/reset.c
 +++ b/drivers/net/wireless/ath/ath5k/reset.c
-@@ -1377,10 +1377,18 @@ int ath5k_hw_reset(struct ath5k_hw *ah, 
+@@ -1374,10 +1374,18 @@ int ath5k_hw_reset(struct ath5k_hw *ah, 
  	 * guess we can tweak it and see how it goes ;-)
  	 */
  	if (ah->ah_version != AR5K_AR5210) {

package/mac80211/patches/404-ath_regd_optional.patch

@@ -10,7 +10,7 @@
  #include "regd_common.h"
  
  /*
-@@ -588,3 +591,5 @@ u32 ath_regd_get_band_ctl(struct ath_reg
+@@ -587,3 +590,5 @@ u32 ath_regd_get_band_ctl(struct ath_reg
  	}
  }
  EXPORT_SYMBOL(ath_regd_get_band_ctl);

package/mac80211/patches/405-ath9k-read-eeprom-data-from-platform-data-on-pci-bus.patch

@@ -8,7 +8,7 @@
  #include "ath9k.h"
  
  static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = {
-@@ -53,21 +54,36 @@ static void ath_pci_read_cachesize(struc
+@@ -52,21 +53,36 @@ static void ath_pci_read_cachesize(struc
  
  static bool ath_pci_eeprom_read(struct ath_common *common, u32 off, u16 *data)
  {

package/mac80211/patches/408-ath9k_tweak_rx_intr_mitigation.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/hw.c
 +++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -1380,7 +1380,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+@@ -1400,7 +1400,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
  
  	if (ah->config.rx_intr_mitigation) {
  		REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_LAST, 500);

package/mac80211/patches/500-ath9k_debugfs_chainmask.patch

@@ -1,130 +0,0 @@
---- a/drivers/net/wireless/ath/ath9k/debug.c
-+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -78,6 +78,90 @@ static const struct file_operations fops
- 
- #define DMA_BUF_LEN 1024
- 
-+static ssize_t read_file_tx_chainmask(struct file *file, char __user *user_buf,
-+			     size_t count, loff_t *ppos)
-+{
-+	struct ath_softc *sc = file->private_data;
-+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-+	char buf[32];
-+	unsigned int len;
-+
-+	len = snprintf(buf, sizeof(buf), "0x%08x\n", common->tx_chainmask);
-+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-+}
-+
-+static ssize_t write_file_tx_chainmask(struct file *file, const char __user *user_buf,
-+			     size_t count, loff_t *ppos)
-+{
-+	struct ath_softc *sc = file->private_data;
-+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-+	unsigned long mask;
-+	char buf[32];
-+	ssize_t len;
-+
-+	len = min(count, sizeof(buf) - 1);
-+	if (copy_from_user(buf, user_buf, len))
-+		return -EINVAL;
-+
-+	buf[len] = '\0';
-+	if (strict_strtoul(buf, 0, &mask))
-+		return -EINVAL;
-+
-+	common->tx_chainmask = mask;
-+	sc->sc_ah->caps.tx_chainmask = mask;
-+	return count;
-+}
-+
-+static const struct file_operations fops_tx_chainmask = {
-+	.read = read_file_tx_chainmask,
-+	.write = write_file_tx_chainmask,
-+	.open = ath9k_debugfs_open,
-+	.owner = THIS_MODULE
-+};
-+
-+
-+static ssize_t read_file_rx_chainmask(struct file *file, char __user *user_buf,
-+			     size_t count, loff_t *ppos)
-+{
-+	struct ath_softc *sc = file->private_data;
-+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-+	char buf[32];
-+	unsigned int len;
-+
-+	len = snprintf(buf, sizeof(buf), "0x%08x\n", common->rx_chainmask);
-+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-+}
-+
-+static ssize_t write_file_rx_chainmask(struct file *file, const char __user *user_buf,
-+			     size_t count, loff_t *ppos)
-+{
-+	struct ath_softc *sc = file->private_data;
-+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-+	unsigned long mask;
-+	char buf[32];
-+	ssize_t len;
-+
-+	len = min(count, sizeof(buf) - 1);
-+	if (copy_from_user(buf, user_buf, len))
-+		return -EINVAL;
-+
-+	buf[len] = '\0';
-+	if (strict_strtoul(buf, 0, &mask))
-+		return -EINVAL;
-+
-+	common->rx_chainmask = mask;
-+	sc->sc_ah->caps.rx_chainmask = mask;
-+	return count;
-+}
-+
-+static const struct file_operations fops_rx_chainmask = {
-+	.read = read_file_rx_chainmask,
-+	.write = write_file_rx_chainmask,
-+	.open = ath9k_debugfs_open,
-+	.owner = THIS_MODULE
-+};
-+
-+
- static ssize_t read_file_dma(struct file *file, char __user *user_buf,
- 			     size_t count, loff_t *ppos)
- {
-@@ -731,6 +815,16 @@ int ath9k_init_debug(struct ath_hw *ah)
- 		goto err;
- #endif
- 
-+	sc->debug.debugfs_rx_chainmask = debugfs_create_file("rx_chainmask",
-+		S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, sc, &fops_rx_chainmask);
-+	if (!sc->debug.debugfs_rx_chainmask)
-+		goto err;
-+
-+	sc->debug.debugfs_tx_chainmask = debugfs_create_file("tx_chainmask",
-+		S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, sc, &fops_tx_chainmask);
-+	if (!sc->debug.debugfs_tx_chainmask)
-+		goto err;
-+
- 	sc->debug.debugfs_dma = debugfs_create_file("dma", S_IRUSR,
- 				       sc->debug.debugfs_phy, sc, &fops_dma);
- 	if (!sc->debug.debugfs_dma)
-@@ -781,6 +875,8 @@ void ath9k_exit_debug(struct ath_hw *ah)
- 	struct ath_common *common = ath9k_hw_common(ah);
- 	struct ath_softc *sc = (struct ath_softc *) common->priv;
- 
-+	debugfs_remove(sc->debug.debugfs_tx_chainmask);
-+	debugfs_remove(sc->debug.debugfs_rx_chainmask);
- 	debugfs_remove(sc->debug.debugfs_recv);
- 	debugfs_remove(sc->debug.debugfs_xmit);
- 	debugfs_remove(sc->debug.debugfs_wiphy);
---- a/drivers/net/wireless/ath/ath9k/debug.h
-+++ b/drivers/net/wireless/ath/ath9k/debug.h
-@@ -152,6 +152,8 @@ struct ath_stats {
- };
- 
- struct ath9k_debug {
-+	struct dentry *debugfs_rx_chainmask;
-+	struct dentry *debugfs_tx_chainmask;
- 	struct dentry *debugfs_phy;
- 	struct dentry *debugfs_debug;
- 	struct dentry *debugfs_dma;

package/mac80211/patches/510-ath9k_debugfs_regaccess.patch

@@ -1,128 +0,0 @@
---- a/drivers/net/wireless/ath/ath9k/debug.c
-+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -795,6 +795,86 @@ static const struct file_operations fops
- 	.owner = THIS_MODULE
- };
- 
-+static ssize_t read_file_regidx(struct file *file, char __user *user_buf,
-+                                size_t count, loff_t *ppos)
-+{
-+	struct ath_softc *sc = file->private_data;
-+	char buf[32];
-+	unsigned int len;
-+
-+	len = snprintf(buf, sizeof(buf), "0x%08x\n", sc->debug.regidx);
-+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-+}
-+
-+static ssize_t write_file_regidx(struct file *file, const char __user *user_buf,
-+			     size_t count, loff_t *ppos)
-+{
-+	struct ath_softc *sc = file->private_data;
-+	unsigned long regidx;
-+	char buf[32];
-+	ssize_t len;
-+
-+	len = min(count, sizeof(buf) - 1);
-+	if (copy_from_user(buf, user_buf, len))
-+		return -EINVAL;
-+
-+	buf[len] = '\0';
-+	if (strict_strtoul(buf, 0, &regidx))
-+		return -EINVAL;
-+
-+	sc->debug.regidx = regidx;
-+	return count;
-+}
-+
-+static const struct file_operations fops_regidx = {
-+	.read = read_file_regidx,
-+	.write = write_file_regidx,
-+	.open = ath9k_debugfs_open,
-+	.owner = THIS_MODULE
-+};
-+
-+static ssize_t read_file_regval(struct file *file, char __user *user_buf,
-+			     size_t count, loff_t *ppos)
-+{
-+	struct ath_softc *sc = file->private_data;
-+	struct ath_hw *ah = sc->sc_ah;
-+	char buf[32];
-+	unsigned int len;
-+	u32 regval;
-+
-+	regval = REG_READ_D(ah, sc->debug.regidx);
-+	len = snprintf(buf, sizeof(buf), "0x%08x\n", regval);
-+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-+}
-+
-+static ssize_t write_file_regval(struct file *file, const char __user *user_buf,
-+			     size_t count, loff_t *ppos)
-+{
-+	struct ath_softc *sc = file->private_data;
-+	struct ath_hw *ah = sc->sc_ah;
-+	unsigned long regval;
-+	char buf[32];
-+	ssize_t len;
-+
-+	len = min(count, sizeof(buf) - 1);
-+	if (copy_from_user(buf, user_buf, len))
-+		return -EINVAL;
-+
-+	buf[len] = '\0';
-+	if (strict_strtoul(buf, 0, &regval))
-+		return -EINVAL;
-+
-+	REG_WRITE_D(ah, sc->debug.regidx, regval);
-+	return count;
-+}
-+
-+static const struct file_operations fops_regval = {
-+	.read = read_file_regval,
-+	.write = write_file_regval,
-+	.open = ath9k_debugfs_open,
-+	.owner = THIS_MODULE
-+};
-+
- int ath9k_init_debug(struct ath_hw *ah)
- {
- 	struct ath_common *common = ath9k_hw_common(ah);
-@@ -864,6 +944,17 @@ int ath9k_init_debug(struct ath_hw *ah)
- 	if (!sc->debug.debugfs_recv)
- 		goto err;
- 
-+	sc->debug.regidx = 0;
-+	sc->debug.debugfs_regidx = debugfs_create_file("regidx",
-+			S_IRUSR|S_IWUSR, sc->debug.debugfs_phy, sc, &fops_regidx);
-+	if (!sc->debug.debugfs_regidx)
-+		goto err;
-+
-+	sc->debug.debugfs_regval = debugfs_create_file("regval",
-+			S_IRUSR|S_IWUSR, sc->debug.debugfs_phy, sc, &fops_regval);
-+	if (!sc->debug.debugfs_regval)
-+		goto err;
-+
- 	return 0;
- err:
- 	ath9k_exit_debug(ah);
-@@ -877,6 +968,8 @@ void ath9k_exit_debug(struct ath_hw *ah)
- 
- 	debugfs_remove(sc->debug.debugfs_tx_chainmask);
- 	debugfs_remove(sc->debug.debugfs_rx_chainmask);
-+	debugfs_remove(sc->debug.debugfs_regval);
-+	debugfs_remove(sc->debug.debugfs_regidx);
- 	debugfs_remove(sc->debug.debugfs_recv);
- 	debugfs_remove(sc->debug.debugfs_xmit);
- 	debugfs_remove(sc->debug.debugfs_wiphy);
---- a/drivers/net/wireless/ath/ath9k/debug.h
-+++ b/drivers/net/wireless/ath/ath9k/debug.h
-@@ -162,6 +162,9 @@ struct ath9k_debug {
- 	struct dentry *debugfs_wiphy;
- 	struct dentry *debugfs_xmit;
- 	struct dentry *debugfs_recv;
-+	struct dentry *debugfs_regidx;
-+	struct dentry *debugfs_regval;
-+	u32 regidx;
- 	struct ath_stats stats;
- };
- 

package/mac80211/patches/510-ath9k_use_minstrel.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/init.c
 +++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -686,7 +686,11 @@ void ath9k_set_hw_capab(struct ath_softc
+@@ -689,7 +689,11 @@ void ath9k_set_hw_capab(struct ath_softc
  	hw->sta_data_size = sizeof(struct ath_node);
  	hw->vif_data_size = sizeof(struct ath_vif);
  

package/mac80211/patches/520-ath0k_hw_mcast_search.patch

@@ -0,0 +1,36 @@
+--- a/drivers/net/wireless/ath/ath9k/hw.c
++++ b/drivers/net/wireless/ath/ath9k/hw.c
+@@ -1497,6 +1497,7 @@ EXPORT_SYMBOL(ath9k_hw_keyreset);
+ bool ath9k_hw_keysetmac(struct ath_hw *ah, u16 entry, const u8 *mac)
+ {
+ 	u32 macHi, macLo;
++	u32 unicast_flag = AR_KEYTABLE_VALID;
+ 
+ 	if (entry >= ah->caps.keycache_size) {
+ 		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+@@ -1505,6 +1506,16 @@ bool ath9k_hw_keysetmac(struct ath_hw *a
+ 	}
+ 
+ 	if (mac != NULL) {
++		/*
++		 * AR_KEYTABLE_VALID indicates that the address is a unicast
++		 * address, which must match the transmitter address for
++		 * decrypting frames.
++		 * Not setting this bit allows the hardware to use the key
++		 * for multicast frame decryption.
++		 */
++		if (mac[0] & 0x01)
++			unicast_flag = 0;
++
+ 		macHi = (mac[5] << 8) | mac[4];
+ 		macLo = (mac[3] << 24) |
+ 			(mac[2] << 16) |
+@@ -1517,7 +1528,7 @@ bool ath9k_hw_keysetmac(struct ath_hw *a
+ 		macLo = macHi = 0;
+ 	}
+ 	REG_WRITE(ah, AR_KEYTABLE_MAC0(entry), macLo);
+-	REG_WRITE(ah, AR_KEYTABLE_MAC1(entry), macHi | AR_KEYTABLE_VALID);
++	REG_WRITE(ah, AR_KEYTABLE_MAC1(entry), macHi | unicast_flag);
+ 
+ 	return true;
+ }

package/mac80211/patches/520-cfg80211_get_freq.patch

@@ -1,34 +0,0 @@
---- a/net/wireless/core.h
-+++ b/net/wireless/core.h
-@@ -76,6 +76,7 @@ struct cfg80211_registered_device {
- 
- 	/* current channel */
- 	struct ieee80211_channel *channel;
-+	enum nl80211_channel_type channel_type;
- 
- 	/* must be last because of the way we do wiphy_priv(),
- 	 * and it should at least be aligned to NETDEV_ALIGN */
---- a/net/wireless/chan.c
-+++ b/net/wireless/chan.c
-@@ -97,6 +97,7 @@ int rdev_set_freq(struct cfg80211_regist
- 		return result;
- 
- 	rdev->channel = chan;
-+	rdev->channel_type = channel_type;
- 
- 	return 0;
- }
---- a/net/wireless/nl80211.c
-+++ b/net/wireless/nl80211.c
-@@ -887,6 +887,11 @@ static int nl80211_send_iface(struct sk_
- 	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
- 	NLA_PUT_STRING(msg, NL80211_ATTR_IFNAME, dev->name);
- 	NLA_PUT_U32(msg, NL80211_ATTR_IFTYPE, dev->ieee80211_ptr->iftype);
-+	if (rdev->channel) {
-+		NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FREQ, rdev->channel->center_freq);
-+		NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_CHANNEL_TYPE, rdev->channel_type);
-+	}
-+
- 
- 	NLA_PUT_U32(msg, NL80211_ATTR_GENERATION,
- 		    rdev->devlist_generation ^

package/mac80211/patches/521-ath9k_common-use_mcast_search.patch

@@ -0,0 +1,72 @@
+--- a/drivers/net/wireless/ath/ath9k/common.c
++++ b/drivers/net/wireless/ath/ath9k/common.c
+@@ -211,10 +211,14 @@ static int ath_reserve_key_cache_slot_tk
+ 	return -1;
+ }
+ 
+-static int ath_reserve_key_cache_slot(struct ath_common *common)
++static int ath_reserve_key_cache_slot(struct ath_common *common,
++				      enum ieee80211_key_alg alg)
+ {
+ 	int i;
+ 
++	if (alg == ALG_TKIP)
++		return ath_reserve_key_cache_slot_tkip(common);
++
+ 	/* First, try to find slots that would not be available for TKIP. */
+ 	if (common->splitmic) {
+ 		for (i = IEEE80211_WEP_NKID; i < common->keymax / 4; i++) {
+@@ -283,6 +287,7 @@ int ath9k_cmn_key_config(struct ath_comm
+ 	struct ath_hw *ah = common->ah;
+ 	struct ath9k_keyval hk;
+ 	const u8 *mac = NULL;
++	u8 gmac[ETH_ALEN];
+ 	int ret = 0;
+ 	int idx;
+ 
+@@ -306,9 +311,23 @@ int ath9k_cmn_key_config(struct ath_comm
+ 	memcpy(hk.kv_val, key->key, key->keylen);
+ 
+ 	if (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
+-		/* For now, use the default keys for broadcast keys. This may
+-		 * need to change with virtual interfaces. */
+-		idx = key->keyidx;
++		switch (vif->type) {
++		case NL80211_IFTYPE_AP:
++			memcpy(gmac, vif->addr, ETH_ALEN);
++			gmac[0] |= 0x01;
++			mac = gmac;
++			idx = ath_reserve_key_cache_slot(common, key->alg);
++			break;
++		case NL80211_IFTYPE_ADHOC:
++			memcpy(gmac, sta->addr, ETH_ALEN);
++			gmac[0] |= 0x01;
++			mac = gmac;
++			idx = ath_reserve_key_cache_slot(common, key->alg);
++			break;
++		default:
++			idx = key->keyidx;
++			break;
++		}
+ 	} else if (key->keyidx) {
+ 		if (WARN_ON(!sta))
+ 			return -EOPNOTSUPP;
+@@ -325,14 +344,12 @@ int ath9k_cmn_key_config(struct ath_comm
+ 			return -EOPNOTSUPP;
+ 		mac = sta->addr;
+ 
+-		if (key->alg == ALG_TKIP)
+-			idx = ath_reserve_key_cache_slot_tkip(common);
+-		else
+-			idx = ath_reserve_key_cache_slot(common);
+-		if (idx < 0)
+-			return -ENOSPC; /* no free key cache entries */
++		idx = ath_reserve_key_cache_slot(common, key->alg);
+ 	}
+ 
++	if (idx < 0)
++		return -ENOSPC; /* no free key cache entries */
++
+ 	if (key->alg == ALG_TKIP)
+ 		ret = ath_setkey_tkip(common, idx, key->key, &hk, mac,
+ 				      vif->type == NL80211_IFTYPE_AP);

package/mac80211/patches/522-ath9k_remove_duplicate_code.patch

@@ -0,0 +1,255 @@
+--- a/drivers/net/wireless/ath/ath9k/main.c
++++ b/drivers/net/wireless/ath/ath9k/main.c
+@@ -622,234 +622,6 @@ static u32 ath_get_extchanmode(struct at
+ 	return chanmode;
+ }
+ 
+-static int ath_setkey_tkip(struct ath_common *common, u16 keyix, const u8 *key,
+-			   struct ath9k_keyval *hk, const u8 *addr,
+-			   bool authenticator)
+-{
+-	struct ath_hw *ah = common->ah;
+-	const u8 *key_rxmic;
+-	const u8 *key_txmic;
+-
+-	key_txmic = key + NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY;
+-	key_rxmic = key + NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY;
+-
+-	if (addr == NULL) {
+-		/*
+-		 * Group key installation - only two key cache entries are used
+-		 * regardless of splitmic capability since group key is only
+-		 * used either for TX or RX.
+-		 */
+-		if (authenticator) {
+-			memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic));
+-			memcpy(hk->kv_txmic, key_txmic, sizeof(hk->kv_mic));
+-		} else {
+-			memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
+-			memcpy(hk->kv_txmic, key_rxmic, sizeof(hk->kv_mic));
+-		}
+-		return ath9k_hw_set_keycache_entry(ah, keyix, hk, addr);
+-	}
+-	if (!common->splitmic) {
+-		/* TX and RX keys share the same key cache entry. */
+-		memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
+-		memcpy(hk->kv_txmic, key_txmic, sizeof(hk->kv_txmic));
+-		return ath9k_hw_set_keycache_entry(ah, keyix, hk, addr);
+-	}
+-
+-	/* Separate key cache entries for TX and RX */
+-
+-	/* TX key goes at first index, RX key at +32. */
+-	memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic));
+-	if (!ath9k_hw_set_keycache_entry(ah, keyix, hk, NULL)) {
+-		/* TX MIC entry failed. No need to proceed further */
+-		ath_print(common, ATH_DBG_FATAL,
+-			  "Setting TX MIC Key Failed\n");
+-		return 0;
+-	}
+-
+-	memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
+-	/* XXX delete tx key on failure? */
+-	return ath9k_hw_set_keycache_entry(ah, keyix + 32, hk, addr);
+-}
+-
+-static int ath_reserve_key_cache_slot_tkip(struct ath_common *common)
+-{
+-	int i;
+-
+-	for (i = IEEE80211_WEP_NKID; i < common->keymax / 2; i++) {
+-		if (test_bit(i, common->keymap) ||
+-		    test_bit(i + 64, common->keymap))
+-			continue; /* At least one part of TKIP key allocated */
+-		if (common->splitmic &&
+-		    (test_bit(i + 32, common->keymap) ||
+-		     test_bit(i + 64 + 32, common->keymap)))
+-			continue; /* At least one part of TKIP key allocated */
+-
+-		/* Found a free slot for a TKIP key */
+-		return i;
+-	}
+-	return -1;
+-}
+-
+-static int ath_reserve_key_cache_slot(struct ath_common *common)
+-{
+-	int i;
+-
+-	/* First, try to find slots that would not be available for TKIP. */
+-	if (common->splitmic) {
+-		for (i = IEEE80211_WEP_NKID; i < common->keymax / 4; i++) {
+-			if (!test_bit(i, common->keymap) &&
+-			    (test_bit(i + 32, common->keymap) ||
+-			     test_bit(i + 64, common->keymap) ||
+-			     test_bit(i + 64 + 32, common->keymap)))
+-				return i;
+-			if (!test_bit(i + 32, common->keymap) &&
+-			    (test_bit(i, common->keymap) ||
+-			     test_bit(i + 64, common->keymap) ||
+-			     test_bit(i + 64 + 32, common->keymap)))
+-				return i + 32;
+-			if (!test_bit(i + 64, common->keymap) &&
+-			    (test_bit(i , common->keymap) ||
+-			     test_bit(i + 32, common->keymap) ||
+-			     test_bit(i + 64 + 32, common->keymap)))
+-				return i + 64;
+-			if (!test_bit(i + 64 + 32, common->keymap) &&
+-			    (test_bit(i, common->keymap) ||
+-			     test_bit(i + 32, common->keymap) ||
+-			     test_bit(i + 64, common->keymap)))
+-				return i + 64 + 32;
+-		}
+-	} else {
+-		for (i = IEEE80211_WEP_NKID; i < common->keymax / 2; i++) {
+-			if (!test_bit(i, common->keymap) &&
+-			    test_bit(i + 64, common->keymap))
+-				return i;
+-			if (test_bit(i, common->keymap) &&
+-			    !test_bit(i + 64, common->keymap))
+-				return i + 64;
+-		}
+-	}
+-
+-	/* No partially used TKIP slots, pick any available slot */
+-	for (i = IEEE80211_WEP_NKID; i < common->keymax; i++) {
+-		/* Do not allow slots that could be needed for TKIP group keys
+-		 * to be used. This limitation could be removed if we know that
+-		 * TKIP will not be used. */
+-		if (i >= 64 && i < 64 + IEEE80211_WEP_NKID)
+-			continue;
+-		if (common->splitmic) {
+-			if (i >= 32 && i < 32 + IEEE80211_WEP_NKID)
+-				continue;
+-			if (i >= 64 + 32 && i < 64 + 32 + IEEE80211_WEP_NKID)
+-				continue;
+-		}
+-
+-		if (!test_bit(i, common->keymap))
+-			return i; /* Found a free slot for a key */
+-	}
+-
+-	/* No free slot found */
+-	return -1;
+-}
+-
+-static int ath_key_config(struct ath_common *common,
+-			  struct ieee80211_vif *vif,
+-			  struct ieee80211_sta *sta,
+-			  struct ieee80211_key_conf *key)
+-{
+-	struct ath_hw *ah = common->ah;
+-	struct ath9k_keyval hk;
+-	const u8 *mac = NULL;
+-	int ret = 0;
+-	int idx;
+-
+-	memset(&hk, 0, sizeof(hk));
+-
+-	switch (key->alg) {
+-	case ALG_WEP:
+-		hk.kv_type = ATH9K_CIPHER_WEP;
+-		break;
+-	case ALG_TKIP:
+-		hk.kv_type = ATH9K_CIPHER_TKIP;
+-		break;
+-	case ALG_CCMP:
+-		hk.kv_type = ATH9K_CIPHER_AES_CCM;
+-		break;
+-	default:
+-		return -EOPNOTSUPP;
+-	}
+-
+-	hk.kv_len = key->keylen;
+-	memcpy(hk.kv_val, key->key, key->keylen);
+-
+-	if (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
+-		/* For now, use the default keys for broadcast keys. This may
+-		 * need to change with virtual interfaces. */
+-		idx = key->keyidx;
+-	} else if (key->keyidx) {
+-		if (WARN_ON(!sta))
+-			return -EOPNOTSUPP;
+-		mac = sta->addr;
+-
+-		if (vif->type != NL80211_IFTYPE_AP) {
+-			/* Only keyidx 0 should be used with unicast key, but
+-			 * allow this for client mode for now. */
+-			idx = key->keyidx;
+-		} else
+-			return -EIO;
+-	} else {
+-		if (WARN_ON(!sta))
+-			return -EOPNOTSUPP;
+-		mac = sta->addr;
+-
+-		if (key->alg == ALG_TKIP)
+-			idx = ath_reserve_key_cache_slot_tkip(common);
+-		else
+-			idx = ath_reserve_key_cache_slot(common);
+-		if (idx < 0)
+-			return -ENOSPC; /* no free key cache entries */
+-	}
+-
+-	if (key->alg == ALG_TKIP)
+-		ret = ath_setkey_tkip(common, idx, key->key, &hk, mac,
+-				      vif->type == NL80211_IFTYPE_AP);
+-	else
+-		ret = ath9k_hw_set_keycache_entry(ah, idx, &hk, mac);
+-
+-	if (!ret)
+-		return -EIO;
+-
+-	set_bit(idx, common->keymap);
+-	if (key->alg == ALG_TKIP) {
+-		set_bit(idx + 64, common->keymap);
+-		if (common->splitmic) {
+-			set_bit(idx + 32, common->keymap);
+-			set_bit(idx + 64 + 32, common->keymap);
+-		}
+-	}
+-
+-	return idx;
+-}
+-
+-static void ath_key_delete(struct ath_common *common, struct ieee80211_key_conf *key)
+-{
+-	struct ath_hw *ah = common->ah;
+-
+-	ath9k_hw_keyreset(ah, key->hw_key_idx);
+-	if (key->hw_key_idx < IEEE80211_WEP_NKID)
+-		return;
+-
+-	clear_bit(key->hw_key_idx, common->keymap);
+-	if (key->alg != ALG_TKIP)
+-		return;
+-
+-	clear_bit(key->hw_key_idx + 64, common->keymap);
+-	if (common->splitmic) {
+-		ath9k_hw_keyreset(ah, key->hw_key_idx + 32);
+-		clear_bit(key->hw_key_idx + 32, common->keymap);
+-		clear_bit(key->hw_key_idx + 64 + 32, common->keymap);
+-	}
+-}
+-
+ static void ath9k_bss_assoc_info(struct ath_softc *sc,
+ 				 struct ieee80211_vif *vif,
+ 				 struct ieee80211_bss_conf *bss_conf)
+@@ -1814,7 +1586,7 @@ static int ath9k_set_key(struct ieee8021
+ 
+ 	switch (cmd) {
+ 	case SET_KEY:
+-		ret = ath_key_config(common, vif, sta, key);
++		ret = ath9k_cmn_key_config(common, vif, sta, key);
+ 		if (ret >= 0) {
+ 			key->hw_key_idx = ret;
+ 			/* push IV and Michael MIC generation to stack */
+@@ -1827,7 +1599,7 @@ static int ath9k_set_key(struct ieee8021
+ 		}
+ 		break;
+ 	case DISABLE_KEY:
+-		ath_key_delete(common, key);
++		ath9k_cmn_key_delete(common, key);
+ 		break;
+ 	default:
+ 		ret = -EINVAL;

package/mac80211/patches/550-ath9k_no_multi_desc_frames.patch

@@ -1,24 +0,0 @@
---- a/drivers/net/wireless/ath/ath9k/common.c
-+++ b/drivers/net/wireless/ath/ath9k/common.c
-@@ -57,13 +57,19 @@ static bool ath9k_rx_accept(struct ath_c
- 	 * rs_more indicates chained descriptors which can be used
- 	 * to link buffers together for a sort of scatter-gather
- 	 * operation.
--	 *
-+	 * reject the frame, we don't support scatter-gather yet and
-+	 * the frame is probably corrupt anyway
-+	 */
-+	if (rx_stats->rs_more)
-+		return false;
-+
-+	/*
- 	 * The rx_stats->rs_status will not be set until the end of the
- 	 * chained descriptors so it can be ignored if rs_more is set. The
- 	 * rs_more will be false at the last element of the chained
- 	 * descriptors.
- 	 */
--	if (!rx_stats->rs_more && rx_stats->rs_status != 0) {
-+	if (rx_stats->rs_status != 0) {
- 		if (rx_stats->rs_status & ATH9K_RXERR_CRC)
- 			rxs->flag |= RX_FLAG_FAILED_FCS_CRC;
- 		if (rx_stats->rs_status & ATH9K_RXERR_PHY)

package/mac80211/patches/600-rt2x00-disable-pci-code-if-CONFIG_PCI-not-defined.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c
 +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
-@@ -225,6 +225,7 @@ void rt2x00pci_uninitialize(struct rt2x0
+@@ -216,6 +216,7 @@ void rt2x00pci_uninitialize(struct rt2x0
  }
  EXPORT_SYMBOL_GPL(rt2x00pci_uninitialize);
  
@@ -8,7 +8,7 @@
  /*
   * PCI driver handlers.
   */
-@@ -399,6 +400,7 @@ int rt2x00pci_resume(struct pci_dev *pci
+@@ -390,6 +391,7 @@ int rt2x00pci_resume(struct pci_dev *pci
  }
  EXPORT_SYMBOL_GPL(rt2x00pci_resume);
  #endif /* CONFIG_PM */

package/mac80211/patches/601-rt2x00-lib-use-rt2x00dev-irq.patch

@@ -1,11 +0,0 @@
---- a/drivers/net/wireless/rt2x00/rt2x00pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
-@@ -215,7 +215,7 @@ void rt2x00pci_uninitialize(struct rt2x0
- 	/*
- 	 * Free irq line.
- 	 */
--	free_irq(to_pci_dev(rt2x00dev->dev)->irq, rt2x00dev);
-+	free_irq(rt2x00dev->irq, rt2x00dev);
- 
- 	/*
- 	 * Free DMA

package/mac80211/patches/700-mwl8k-missing-pci-id-for-WNR854T.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/mwl8k.c
 +++ b/drivers/net/wireless/mwl8k.c
-@@ -3850,6 +3850,7 @@ MODULE_FIRMWARE("mwl8k/helper_8366.fw");
+@@ -3882,6 +3882,7 @@ MODULE_FIRMWARE("mwl8k/helper_8366.fw");
  MODULE_FIRMWARE("mwl8k/fmimage_8366.fw");
  
  static DEFINE_PCI_DEVICE_TABLE(mwl8k_pci_id_table) = {

package/mountd/Makefile

@@ -1,11 +1,11 @@
-# Copyright (C) 2009 OpenWrt.org
+# Copyright (C) 2009-2010 OpenWrt.org
 # All rights reserved.
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=mountd
 PKG_VERSION:=0.1
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources

package/nvram/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2009 Jo-Philipp Wich <xm@subsignal.org>
+# Copyright (C) 2009-2010 Jo-Philipp Wich <xm@subsignal.org>
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=nvram
-PKG_RELEASE:=6
+PKG_RELEASE:=7
 
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 

package/nvram/files/nvram.init

@@ -52,7 +52,13 @@ fixup_linksys() {
 			}
 		;;
 		"1071") #0x042f
-			nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0009 )))"
+			# do sanity check first! max 0x0011 = 128mb
+			SDRAM_INIT=$(printf %d $(/usr/sbin/nvram get sdram_init))
+			[ "$SDRAM_INIT" -lt "9" -o "$SDRAM_INIT" -gt "17" ] && {
+				# set this to default: 0x09 only if value is invaild like 16MB on Asus WL-500GP
+				echo "sdram_init is invaild: $(printf 0x%04x $SDRAM_INIT), force to default!"
+				nvram_set sdram_init 0x0009
+			}
 			[ "$COMMIT" = 1 ] && {
 				nvram_set sdram_ncdl 0x0
 			}

package/ppp/Makefile

@@ -10,7 +10,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=ppp
 PKG_VERSION:=2.4.4
-PKG_RELEASE:=5
+PKG_RELEASE:=7
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=ftp://ftp.samba.org/pub/ppp/
@@ -140,7 +140,7 @@ define Package/ppp/install
 	$(INSTALL_BIN) ./files/etc/ppp/ipv6-up $(1)/etc/ppp/
 	$(INSTALL_BIN) ./files/etc/ppp/ipv6-down $(1)/etc/ppp/
 	$(INSTALL_DATA) ./files/etc/ppp/options $(1)/etc/ppp/
-	ln -sf /tmp/resolv.conf.auto $(1)/etc/ppp/resolv.conf
+	ln -sf /tmp/resolv.conf.ppp $(1)/etc/ppp/resolv.conf
 endef
 	
 define Package/ppp-mod-pppoa/install
@@ -149,6 +149,8 @@ define Package/ppp-mod-pppoa/install
 		$(1)/usr/lib/pppd/$(PKG_VERSION)/
 	$(INSTALL_DIR) $(1)/lib/network
 	$(INSTALL_BIN) ./files/pppoa.sh $(1)/lib/network/
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/atm
+	$(INSTALL_DATA) ./files/etc/hotplug.d/atm/20-atm-modem $(1)/etc/hotplug.d/atm/
 endef
 
 define Package/ppp-mod-pppoe/install

package/ppp/files/etc/hotplug.d/atm/20-atm-modem

@@ -0,0 +1,25 @@
+#!/bin/sh
+
+if [ "$ACTION" = "add" ]; then
+	include /lib/network
+	scan_interfaces
+
+	local found=0
+	local ifc
+	for ifc in $interfaces; do
+		local up
+		config_get_bool up "$ifc" up 0
+
+		local proto
+		config_get proto "$ifc" proto
+
+		if [ "$proto" = "pppoa" ] && [ "$up" != 1 ]; then
+			found=1
+			( sleep 1; ifup "$ifc" ) &
+		fi
+	done
+
+	if [ "$found" != 1 ]; then
+		logger "Found no matching interface for DSL device $DEVICENAME"
+	fi
+fi

package/ppp/files/etc/ppp/ip-up

@@ -1,22 +1,25 @@
 #!/bin/sh
+
 . /etc/functions.sh
+. /lib/network/config.sh
+
 PPP_IFACE="$1"
 PPP_TTY="$2"
 PPP_SPEED="$3"
 PPP_LOCAL="$4"
 PPP_REMOTE="$5"
 PPP_IPPARAM="$(echo $6 | sed 's/\./_/g')"
-PPP_UNIT="${PPP_IFACE##ppp}"
 
 export PPP_IFACE PPP_TTY PPP_SPEED PPP_LOCAL PPP_REMOTE PPP_IPPARAM
 [ -z "$PPP_IPPARAM" -o -z "$PPP_LOCAL" ] || {
-	uci_set_state network "$PPP_IPPARAM" unit "$PPP_UNIT"
+	uci_set_state network "$PPP_IPPARAM" ifname "$PPP_IFACE"
 	uci_set_state network "$PPP_IPPARAM" ipaddr "$PPP_LOCAL"
 	uci_set_state network "$PPP_IPPARAM" gateway "$PPP_REMOTE"
 
 	local dns="$DNS1${DNS2:+ $DNS2}"
-	[ -n "$dns" ] && uci_set_state network "$PPP_IPPARAM" dns "$dns"
+	[ -n "$dns" ] && add_dns "$PPP_IPPARAM" $dns
 }
+
 [ -z "$PPP_IPPARAM" ] || env -i ACTION="ifup" INTERFACE="$PPP_IPPARAM" DEVICE="$PPP_IFACE" PROTO=ppp /sbin/hotplug-call "iface"
 
 [ -d /etc/ppp/ip-up.d ] && {

package/ppp/files/ppp.sh

@@ -1,63 +1,40 @@
-scan_ppp() {
+stop_interface_ppp() {
-	config_get ifname "$1" ifname
+	local cfg="$1"
-	pppdev="${pppdev:-0}"
+
-	config_get devunit "$1" unit
+	local proto
-	{
+	config_get proto "$cfg" proto
-	        unit=
+
-	        pppif=
+	local link="$proto-$cfg"
-	        if [ ! -d /tmp/.ppp-counter ]; then
+	[ -f "/var/run/ppp-${link}.pid" ] && {
-	       	     mkdir -p /tmp/.ppp-counter
+		local pid="$(head -n1 /var/run/ppp-${link}.pid 2>/dev/null)"
-	        fi
+		local try=0
-	        local maxunit
+		grep -qs pppd "/proc/$pid/cmdline" && kill -TERM $pid && \
-	        maxunit="$(cat /tmp/.ppp-counter/max-unit 2>/dev/null)" 
+			while grep -qs pppd "/proc/$pid/cmdline" && [ $((try++)) -lt 5 ]; do sleep 1; done
-	        if [ -z "$maxunit" ]; then
+		grep -qs pppd "/proc/$pid/cmdline" && kill -KILL $pid && \
-	            maxunit=-1
+			while grep -qs pppd "/proc/$pid/cmdline"; do sleep 1; done
-	        fi
+		rm -f "/var/run/ppp-${link}.pid"
-	        local i
-	        i=0
-	        while [ $i -le $maxunit ]; do
-	             local unitdev
-	             unitdev="$(cat /tmp/.ppp-counter/ppp${i} 2>/dev/null)"
-	             if [ "$unitdev" = "$1" ]; then
-	                  unit="$i"
-	                  pppif="ppp${i}"
-	                  break
-	             fi
-	             i="$(($i + 1))"
-	        done 
-	        if [ -z "$unit" ] || [ -z "$pppif" ]; then
-	            maxunit="$(($maxunit + 1))"
-	            if [ -n "$devunit" ]; then
-	             	unit="$devunit"
-		    elif [ "${ifname%%[0-9]*}" = ppp ]; then
-			 unit="${ifname##ppp}"
-	            else
-	                 unit="$maxunit"
-	            fi 
-         	    [ "$maxunit" -lt "$unit" ] && maxunit="$unit"
-		    pppif="ppp${unit}"
-		    echo "$1" >/tmp/.ppp-counter/$pppif 2>/dev/null
-		    echo "$maxunit" >/tmp/.ppp-counter/max-unit 2>/dev/null
-	        fi
-		config_set "$1" ifname "ppp$unit"
-		config_set "$1" unit "$unit"
 	}
+
+	remove_dns "$cfg"
+
+	local lock="/var/lock/ppp-$link"
+	[ -f "$lock" ] && lock -u "$lock"
 }
 
 start_pppd() {
 	local cfg="$1"; shift
-	local ifname
 
-	# make sure the network state references the correct ifname
+	local proto
-	scan_ppp "$cfg"
+	config_get proto "$cfg" proto
-	config_get ifname "$cfg" ifname
+
-	set_interface_ifname "$cfg" "$ifname"
+	# unique link identifier
+	local link="${proto:-ppp}-$cfg"
 
 	# make sure only one pppd process is started
-	lock "/var/lock/ppp-${cfg}"
+	lock "/var/lock/ppp-${link}"
-	local pid="$(head -n1 /var/run/ppp-${cfg}.pid 2>/dev/null)"
+	local pid="$(head -n1 /var/run/ppp-${link}.pid 2>/dev/null)"
 	[ -d "/proc/$pid" ] && grep pppd "/proc/$pid/cmdline" 2>/dev/null >/dev/null && {
-		lock -u "/var/lock/ppp-${cfg}"
+		lock -u "/var/lock/ppp-${link}"
 		return 0
 	}
 
@@ -68,9 +45,6 @@ start_pppd() {
 	local device
 	config_get device "$cfg" device
 
-	local unit
-	config_get unit "$cfg" unit
-
 	local username
 	config_get username "$cfg" username
 
@@ -91,7 +65,8 @@ start_pppd() {
 
 	local defaultroute
 	config_get_bool defaultroute "$cfg" defaultroute 1
-	[ "$defaultroute" -eq 1 ] && defaultroute="defaultroute replacedefaultroute" || defaultroute=""
+	[ "$defaultroute" -eq 1 ] && \
+		defaultroute="defaultroute replacedefaultroute" || defaultroute="nodefaultroute"
 
 	local interval="${keepalive##*[, ]}"
 	[ "$interval" != "$keepalive" ] || interval=5
@@ -109,15 +84,11 @@ start_pppd() {
 	local peerdns
 	config_get_bool peerdns "$cfg" peerdns $peer_default
 
-	echo -n "" > /tmp/resolv.conf.auto
-
 	[ "$peerdns" -eq 1 ] && {
 		peerdns="usepeerdns"
 	} || {
 		peerdns=""
-		for dns in $dns; do
+		add_dns "$cfg" $dns
-			echo "nameserver $dns" >> /tmp/resolv.conf.auto
-		done
 	}
 
 	local demand
@@ -126,8 +97,7 @@ start_pppd() {
 	local demandargs
 	[ "$demand" -eq 1 ] && {
 		demandargs="precompiled-active-filter /etc/ppp/filter demand idle"
-		[ "$has_dns" -eq 0 ] && \
+		[ "$has_dns" -eq 0 ] && add_dns "$cfg" 1.1.1.1
-			echo "nameserver 1.1.1.1" > /tmp/resolv.conf.auto
 	} || {
 		demandargs="persist"
 	}
@@ -136,21 +106,21 @@ start_pppd() {
 	config_get_bool ipv6 "$cfg" ipv6 0
 	[ "$ipv6" -eq 1 ] && ipv6="+ipv6" || ipv6=""
 
-	/usr/sbin/pppd "$@" \
+	start-stop-daemon -S -b -x /usr/sbin/pppd -m -p /var/run/ppp-$link.pid -- "$@" \
 		${keepalive:+lcp-echo-interval $interval lcp-echo-failure ${keepalive%%[, ]*}} \
 		$demandargs \
 		$peerdns \
 		$defaultroute \
 		${username:+user "$username" password "$password"} \
-		unit "$unit" \
-		linkname "$cfg" \
 		ipparam "$cfg" \
+		ifname "$link" \
 		${connect:+connect "$connect"} \
 		${disconnect:+disconnect "$disconnect"} \
 		${ipv6} \
-		${pppd_options}
+		${pppd_options} \
+		nodetach
 
-	lock -u "/var/lock/ppp-${cfg}"
+	lock -u "/var/lock/ppp-${link}"
 }
 
 setup_interface_ppp() {

package/ppp/files/pppoa.sh

@@ -1,28 +1,37 @@
-scan_pppoa() {
+stop_interface_pppoa() {
-	scan_ppp "$@"
+	stop_interface_ppp "$1"
 }
 
 setup_interface_pppoa() {
 	local iface="$1"
 	local config="$2"
 
+	local device
 	config_get device "$config" device
+
+	local vpi
 	config_get vpi "$config" vpi
+
+	local vci
 	config_get vci "$config" vci
 
 	for module in slhc ppp_generic pppoatm; do
 		/sbin/insmod $module 2>&- >&-
 	done
 
+	local encaps
 	config_get encaps "$config" encaps
+
 	case "$encaps" in
-		1|vc) ENCAPS="vc-encaps" ;;
+		1|vc) encaps="vc-encaps" ;;
-		*) ENCAPS="llc-encaps" ;;
+		*) encaps="llc-encaps" ;;
 	esac
 
+	local mtu
 	config_get mtu "$config" mtu
 	mtu=${mtu:-1500}
+
 	start_pppd "$config" \
-		plugin pppoatm.so ${vpi:-8}.${vci:-35} ${ENCAPS} \
+		plugin pppoatm.so ${vpi:-8}.${vci:-35} ${encaps} \
 		mtu $mtu mru $mtu
 }

package/ppp/files/pppoe.sh

@@ -1,5 +1,5 @@
-scan_pppoe() {
+stop_interface_pppoe() {
-	scan_ppp "$@"
+	stop_interface_ppp "$1"
 }
 
 setup_interface_pppoe() {

package/ppp/patches/320-custom_iface_names.patch

@@ -0,0 +1,128 @@
+--- a/pppd/main.c
++++ b/pppd/main.c
+@@ -742,8 +742,11 @@ void
+ set_ifunit(iskey)
+     int iskey;
+ {
+-    info("Using interface %s%d", PPP_DRV_NAME, ifunit);
+-    slprintf(ifname, sizeof(ifname), "%s%d", PPP_DRV_NAME, ifunit);
++    if (use_ifname[0] == 0)
++	slprintf(ifname, sizeof(ifname), "%s%d", PPP_DRV_NAME, ifunit);
++    else
++	slprintf(ifname, sizeof(ifname), "%s", use_ifname);
++    info("Using interface %s", ifname);
+     script_setenv("IFNAME", ifname, iskey);
+     if (iskey) {
+ 	create_pidfile(getpid());	/* write pid to file */
+--- a/pppd/options.c
++++ b/pppd/options.c
+@@ -111,6 +111,7 @@ int	log_to_fd = 1;		/* send log messages
+ bool	log_default = 1;	/* log_to_fd is default (stdout) */
+ int	maxfail = 10;		/* max # of unsuccessful connection attempts */
+ char	linkname[MAXPATHLEN];	/* logical name for link */
++char	use_ifname[IFNAMSIZ];	/* physical name for PPP link */
+ bool	tune_kernel;		/* may alter kernel settings */
+ int	connect_delay = 1000;	/* wait this many ms after connect script */
+ int	req_unit = -1;		/* requested interface unit */
+@@ -264,6 +265,9 @@ option_t general_options[] = {
+     { "linkname", o_string, linkname,
+       "Set logical name for link",
+       OPT_PRIO | OPT_PRIV | OPT_STATIC, NULL, MAXPATHLEN },
++    { "ifname", o_string, use_ifname,
++      "Set physical name for PPP interface",
++      OPT_PRIO | OPT_PRIV | OPT_STATIC, NULL, IFNAMSIZ },
+ 
+     { "maxfail", o_int, &maxfail,
+       "Maximum number of unsuccessful connection attempts to allow",
+--- a/pppd/pppd.h
++++ b/pppd/pppd.h
+@@ -71,6 +71,10 @@
+ #include "eui64.h"
+ #endif
+ 
++#ifndef IFNAMSIZ
++#define IFNAMSIZ	16
++#endif
++
+ /*
+  * Limits.
+  */
+@@ -308,6 +312,7 @@ extern char	*record_file;	/* File to rec
+ extern bool	sync_serial;	/* Device is synchronous serial device */
+ extern int	maxfail;	/* Max # of unsuccessful connection attempts */
+ extern char	linkname[MAXPATHLEN]; /* logical name for link */
++extern char	use_ifname[IFNAMSIZ]; /* physical name for PPP interface */
+ extern bool	tune_kernel;	/* May alter kernel settings as necessary */
+ extern int	connect_delay;	/* Time to delay after connect script */
+ extern int	max_data_rate;	/* max bytes/sec through charshunt */
+--- a/pppd/sys-linux.c
++++ b/pppd/sys-linux.c
+@@ -168,6 +168,10 @@ struct in6_ifreq {
+ /* We can get an EIO error on an ioctl if the modem has hung up */
+ #define ok_error(num) ((num)==EIO)
+ 
++#if !defined(PPP_DRV_NAME)
++#define PPP_DRV_NAME	"ppp"
++#endif /* !defined(PPP_DRV_NAME) */
++
+ static int tty_disc = N_TTY;	/* The TTY discipline */
+ static int ppp_disc = N_PPP;	/* The PPP discpline */
+ static int initfdflags = -1;	/* Initial file descriptor flags for fd */
+@@ -622,7 +626,8 @@ void generic_disestablish_ppp(int dev_fd
+  */
+ static int make_ppp_unit()
+ {
+-	int x, flags;
++	struct ifreq ifr;
++	int x, flags, s;
+ 
+ 	if (ppp_dev_fd >= 0) {
+ 		dbglog("in make_ppp_unit, already had /dev/ppp open?");
+@@ -645,6 +650,32 @@ static int make_ppp_unit()
+ 	}
+ 	if (x < 0)
+ 		error("Couldn't create new ppp unit: %m");
++
++	if (use_ifname[0] != 0) {
++		s = socket(PF_INET, SOCK_DGRAM, 0);
++		if (s < 0)
++			s = socket(PF_PACKET, SOCK_DGRAM, 0);
++		if (s < 0)
++			s = socket(PF_INET6, SOCK_DGRAM, 0);
++		if (s < 0)
++			s = socket(PF_UNIX, SOCK_DGRAM, 0);
++		if (s >= 0) {
++			slprintf(ifr.ifr_name, sizeof(ifr.ifr_name), "%s%d", PPP_DRV_NAME, ifunit);
++			slprintf(ifr.ifr_newname, sizeof(ifr.ifr_newname), "%s", use_ifname);
++			x = ioctl(s, SIOCSIFNAME, &ifr);
++			close(s);
++		} else {
++			x = s;
++		}
++		if (x < 0) {
++			error("Couldn't rename %s to %s", ifr.ifr_name, ifr.ifr_newname);
++			close(ppp_dev_fd);
++			ppp_dev_fd = -1;
++		} else {
++			info("Renamed %s to %s", ifr.ifr_name, ifr.ifr_newname);
++		}
++	}
++
+ 	return x;
+ }
+ 
+--- a/pppstats/pppstats.c
++++ b/pppstats/pppstats.c
+@@ -506,10 +506,12 @@ main(argc, argv)
+     if (argc > 0)
+ 	interface = argv[0];
+ 
++/*
+     if (sscanf(interface, PPP_DRV_NAME "%d", &unit) != 1) {
+ 	fprintf(stderr, "%s: invalid interface '%s' specified\n",
+ 		progname, interface);
+     }
++*/
+ 
+ #ifndef STREAMS
+     {

package/pptp/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=pptp
-PKG_VERSION:=1.6.0
+PKG_VERSION:=1.7.1
-PKG_RELEASE:=6
+PKG_RELEASE:=3
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=@SF/pptpclient
-PKG_MD5SUM:=9a706327fb9827541d7c86d48ceb9631
+PKG_MD5SUM:=b47735ba5d6d37dfdbccb85afc044ede
 
 include $(INCLUDE_DIR)/package.mk
 

package/pptp/files/pptp.init

@@ -1,33 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-
-START=41
-STOP=30
-
-updown_pptp_interface () {
-	config_get proto "$1" proto
-	if [ "$proto" = "pptp" ]; then
-		if$2 "$1"	
-	fi
-}
-
-boot () {
-	start
-}
-
-start() {
-	config_load network
-	config_foreach updown_pptp_interface interface up
-}
-
-restart() {
-	config_load network
-	config_foreach updown_pptp_interface interface down
-	config_foreach updown_pptp_interface interface up
-}
-
-stop() {
-	config_load network
-	config_foreach updown_pptp_interface interface down
-}
-

package/pptp/files/pptp.sh

@@ -1,20 +1,36 @@
-scan_pptp() {
-	scan_ppp "$@"
-}
-
 find_gw() {
 	route -n | awk '$1 == "0.0.0.0" { print $2; exit }'
 }
 
+scan_pptp() {
+	config_set "$1" device "pptp-$1"
+}
+
+stop_interface_pptp() {
+	stop_interface_ppp "$1"
+}
+
+coldplug_interface_pptp() {
+	setup_interface_pptp "pptp-$1" "$1"
+}
 
 setup_interface_pptp() {
 	local config="$2"
 	local ifname
 
+	local device
 	config_get device "$config" device
+
+	local ipproto
 	config_get ipproto "$config" ipproto
+
+	local server
 	config_get server "$config" server
 
+	local buffering
+	config_get_bool buffering "$config" buffering 1
+	[ "$buffering" == 0 ] && buffering="--nobuffer" || buffering=
+
 	for module in slhc ppp_generic ppp_async ip_gre; do
 		/sbin/insmod $module 2>&- >&-
 	done
@@ -23,7 +39,7 @@ setup_interface_pptp() {
 	setup_interface "$device" "$config" "${ipproto:-dhcp}"
 	local gw="$(find_gw)"
 	[ -n "$gw" ] && {
-		route delete "$server" 2>/dev/null >/dev/null
+		[ "$gw" != 0.0.0.0 ] && route delete "$server" 2>/dev/null >/dev/null
 		route add "$server" gw "$gw"
 	}
 
@@ -31,15 +47,10 @@ setup_interface_pptp() {
 	config_get netmask "$config" netmask
 	[ -z "$netmask" -o -z "$device" ] || ifconfig $device netmask $netmask
 
-	# make sure the network state references the correct ifname
-	scan_ppp "$config"
-	config_get ifname "$config" ifname
-	uci_set_state network "$config" ifname "$ifname"
-
 	config_get mtu "$config" mtu
 	mtu=${mtu:-1452}
 	start_pppd "$config" \
-		pty "/usr/sbin/pptp $server --loglevel 0 --nolaunchpppd" \
+		pty "/usr/sbin/pptp $server --loglevel 0 --nolaunchpppd $buffering" \
 		file /etc/ppp/options.pptp \
 		mtu $mtu mru $mtu
 }

package/siit/Makefile

@@ -1,5 +1,5 @@
 # 
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -10,6 +10,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=siit
 PKG_VERSION:=1.1
+PKG_RELEASE:=1
 
 include $(INCLUDE_DIR)/package.mk
 

package/swconfig/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2008-2009 OpenWrt.org
+# Copyright (C) 2008-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=swconfig
-PKG_RELEASE:=5
+PKG_RELEASE:=6
 
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/kernel.mk

package/uci/Makefile

@@ -12,7 +12,7 @@ UCI_RELEASE=5
 
 PKG_NAME:=uci
 PKG_VERSION:=$(UCI_VERSION)$(if $(UCI_RELEASE),.$(UCI_RELEASE))
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 PKG_REV:=aa3ab8012bfbf793d2884c08ea924545a04e9544
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz

package/uci/files/lib/config/uci.sh

@@ -1,6 +1,7 @@
 #!/bin/sh
 # Shell script compatibility wrappers for /sbin/uci
 #
+# Copyright (C) 2008-2010  OpenWrt.org
 # Copyright (C) 2008  Felix Fietkau <nbd@openwrt.org>
 #
 # This program is free software; you can redistribute it and/or modify
@@ -41,9 +42,9 @@ uci_load() {
 
 uci_set_default() {
 	local PACKAGE="$1"
-	/sbin/uci ${UCI_CONFIG_DIR:+-c $UCI_CONFIG_DIR} -q show "$1" > /dev/null && return 0
+	/sbin/uci ${UCI_CONFIG_DIR:+-c $UCI_CONFIG_DIR} -q show "$PACKAGE" > /dev/null && return 0
-	/sbin/uci ${UCI_CONFIG_DIR:+-c $UCI_CONFIG_DIR} import "$1"
+	/sbin/uci ${UCI_CONFIG_DIR:+-c $UCI_CONFIG_DIR} import "$PACKAGE"
-	/sbin/uci ${UCI_CONFIG_DIR:+-c $UCI_CONFIG_DIR} commit "$1"
+	/sbin/uci ${UCI_CONFIG_DIR:+-c $UCI_CONFIG_DIR} commit "$PACKAGE"
 }
 
 uci_revert_state() {
@@ -73,6 +74,23 @@ uci_set() {
 	/sbin/uci ${UCI_CONFIG_DIR:+-c $UCI_CONFIG_DIR} set "$PACKAGE.$CONFIG.$OPTION=$VALUE"
 }
 
+uci_get_state() {
+	uci_get "$1" "$2" "$3" "$4" "/var/state"
+}
+
+uci_get() {
+	local PACKAGE="$1"
+	local CONFIG="$2"
+	local OPTION="$3"
+	local DEFAULT="$4"
+	local STATE="$5"
+
+	/sbin/uci ${UCI_CONFIG_DIR:+-c $UCI_CONFIG_DIR} ${STATE:+-P $STATE} -q get "$PACKAGE${CONFIG:+.$CONFIG}${OPTION:+.$OPTION}"
+	RET="$?"
+	[ "$RET" -ne 0 ] && [ -n "$DEFAULT" ] && echo "$DEFAULT"
+	return "$RET"
+}
+
 uci_add() {
 	local PACKAGE="$1"
 	local TYPE="$2"

package/uhttpd/files/uhttpd.init

@@ -48,7 +48,7 @@ start_instance()
 	UHTTPD_KEY=""
 
 	local cfg="$1"
-	local realm="$(uci get system.@system[0].hostname 2>/dev/null)"
+	local realm="$(uci_get system.@system[0].hostname)"
 	local listen http https
 
 	append_arg "$cfg" home "-h"

package/wprobe/Makefile

@@ -1,5 +1,5 @@
 # 
-# Copyright (C) 2008 OpenWrt.org
+# Copyright (C) 2008-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -9,6 +9,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=wprobe
 PKG_VERSION:=1
+PKG_RELEASE:=1
 
 PKG_BUILD_DEPENDS:=PACKAGE_wprobe-export:libipfix
 

target/linux/brcm-2.4/image/Makefile

@@ -35,7 +35,7 @@ define Image/Build/CyberTAN
 	$(STAGING_DIR_HOST)/bin/addpattern -4 -p $(3) -v v$(4) -i $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx -o $(BIN_DIR)/openwrt-$(2)-$(5).bin $(if $(6),-s $(6))
 endef
 define Image/Build/CyberTAN2
-	$(STAGING_DIR_HOST)/bin/addpattern -4 -p $(3) -v v$(4) -i $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx2 -o $(BIN_DIR)/openwrt-$(2)-$(5).bin $(if $(6),-s $(6))
+	$(STAGING_DIR_HOST)/bin/addpattern -4 -p $(3) -v v$(4) -i $(BIN_DIR)/openwrt-$(2)-$(5)-sysupgrade.bin -o $(BIN_DIR)/openwrt-$(2)-$(5)-factory.bin $(if $(6),-s $(6))
 endef
 define Image/Build/CyberTANHead
 	$(STAGING_DIR_HOST)/bin/addpattern -5 -p $(3) -v v$(4) -i /dev/null -o $(KDIR)/openwrt-$(2)-header.bin $(if $(6),-s $(6))
@@ -61,7 +61,7 @@ endef
 
 define Image/Build/trxV2
 	$(call Image/Build/CyberTANHead,$(1),$(2),$(3),$(4),$(5),$(if $(6),$(6)))
-	$(STAGING_DIR_HOST)/bin/trx -2 -o $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx2 \
+	$(STAGING_DIR_HOST)/bin/trx -2 -o $(BIN_DIR)/openwrt-$(2)-$(5)-sysupgrade.bin \
 		-f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma \
 		$(call trxalign/$(1),$(1),$(KDIR)/openwrt-$(2)-header.bin)
 	$(call Image/Build/CyberTAN2,$(1),$(2),$(3),$(4),$(5),$(if $(6),$(6)))

target/linux/brcm47xx/patches-2.6.32/270-ehci-ssb.patch

@@ -50,7 +50,7 @@
  
 --- /dev/null
 +++ b/drivers/usb/host/ehci-ssb.c
-@@ -0,0 +1,201 @@
+@@ -0,0 +1,158 @@
 +/*
 + * Sonics Silicon Backplane
 + * Broadcom USB-core EHCI driver (SSB bus glue)
@@ -90,7 +90,6 @@
 +	return (struct ssb_ehci_device *)(hcd->hcd_priv);
 +}
 +
-+
 +static int ssb_ehci_reset(struct usb_hcd *hcd)
 +{
 +	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
@@ -115,55 +114,11 @@
 +	if (err)
 +		return err;
 +
-+	ehci_port_power(ehci, 0);
++	ehci_reset(ehci);
 +
 +	return err;
 +}
 +
-+static int ssb_ehci_start(struct usb_hcd *hcd)
-+{
-+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+	int err;
-+
-+	err = ehci_run(hcd);
-+	if (err < 0) {
-+		ehci_err(ehci, "can't start\n");
-+		ehci_stop(hcd);
-+	}
-+
-+	return err;
-+}
-+
-+#ifdef CONFIG_PM
-+static int ssb_ehci_hcd_suspend(struct usb_hcd *hcd, pm_message_t message)
-+{
-+	struct ssb_ehci_device *ehcidev = hcd_to_ssb_ehci(hcd);
-+	struct ehci_hcd *ehci = &ehcidev->ehci;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&ehci->lock, flags);
-+
-+	ehci_writel(ehci, EHCI_INTR_MIE, &ehci->regs->intrdisable);
-+	ehci_readl(ehci, &ehci->regs->intrdisable); /* commit write */
-+
-+	/* make sure snapshot being resumed re-enumerates everything */
-+	if (message.event == PM_EVENT_PRETHAW)
-+		ehci_usb_reset(ehci);
-+
-+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-+
-+	spin_unlock_irqrestore(&ehci->lock, flags);
-+	return 0;
-+}
-+
-+static int ssb_ehci_hcd_resume(struct usb_hcd *hcd)
-+{
-+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-+	usb_hcd_resume_root_hub(hcd);
-+	return 0;
-+}
-+#endif /* CONFIG_PM */
-+
 +static const struct hc_driver ssb_ehci_hc_driver = {
 +	.description		= "ssb-usb-ehci",
 +	.product_desc		= "SSB EHCI Controller",
@@ -173,35 +128,37 @@
 +	.flags			= HCD_MEMORY | HCD_USB2,
 +
 +	.reset			= ssb_ehci_reset,
-+	.start			= ssb_ehci_start,
++	.start			= ehci_run,
 +	.stop			= ehci_stop,
 +	.shutdown		= ehci_shutdown,
 +
-+#ifdef CONFIG_PM
-+	.suspend		= ssb_ehci_hcd_suspend,
-+	.resume			= ssb_ehci_hcd_resume,
-+#endif
-+
 +	.urb_enqueue		= ehci_urb_enqueue,
 +	.urb_dequeue		= ehci_urb_dequeue,
 +	.endpoint_disable	= ehci_endpoint_disable,
++	.endpoint_reset		= ehci_endpoint_reset,
 +
 +	.get_frame_number	= ehci_get_frame,
 +
 +	.hub_status_data	= ehci_hub_status_data,
 +	.hub_control		= ehci_hub_control,
-+#ifdef CONFIG_PM
 +	.bus_suspend		= ehci_bus_suspend,
 +	.bus_resume		= ehci_bus_resume,
-+#endif
++	.relinquish_port	= ehci_relinquish_port,
++	.port_handed_over	= ehci_port_handed_over,
 +
++	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 +};
 +
 +static void ssb_ehci_detach(struct ssb_device *dev, struct usb_hcd *hcd)
 +{
++	if (hcd->driver->shutdown)
++		hcd->driver->shutdown(hcd);
 +
 +	usb_remove_hcd(hcd);
++
 +	iounmap(hcd->regs);
++	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++
 +	usb_put_hcd(hcd);
 +}
 +EXPORT_SYMBOL_GPL(ssb_ehci_detach);

target/linux/generic-2.6/config-2.6.30

@@ -2164,7 +2164,6 @@ CONFIG_SQUASHFS_LZMA=y
 CONFIG_SQUASHFS_SUPPORT_ZLIB=y
 # CONFIG_SQUASHFS_VMALLOC is not set
 CONFIG_SQUASHFS=y
-# CONFIG_SSB_BLOCKIO is not set
 # CONFIG_SSB_DEBUG is not set
 # CONFIG_SSB is not set
 # CONFIG_SSB_PCMCIAHOST is not set

target/linux/generic-2.6/config-2.6.32

@@ -2283,7 +2283,6 @@ CONFIG_SQUASHFS_LZMA=y
 CONFIG_SQUASHFS_SUPPORT_ZLIB=y
 # CONFIG_SQUASHFS_VMALLOC is not set
 CONFIG_SQUASHFS=y
-# CONFIG_SSB_BLOCKIO is not set
 # CONFIG_SSB_DEBUG is not set
 # CONFIG_SSB is not set
 # CONFIG_SSB_PCMCIAHOST is not set

target/linux/generic-2.6/patches-2.6.30/941-ssb_update.patch

@@ -128,7 +128,170 @@
 +EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
 --- a/drivers/ssb/main.c
 +++ b/drivers/ssb/main.c
-@@ -472,6 +472,8 @@ static int ssb_devices_register(struct s
+@@ -120,6 +120,19 @@ static void ssb_device_put(struct ssb_de
+ 		put_device(dev->dev);
+ }
+ 
++static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
++{
++	if (drv)
++		get_driver(&drv->drv);
++	return drv;
++}
++
++static inline void ssb_driver_put(struct ssb_driver *drv)
++{
++	if (drv)
++		put_driver(&drv->drv);
++}
++
+ static int ssb_device_resume(struct device *dev)
+ {
+ 	struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+@@ -190,90 +203,81 @@ int ssb_bus_suspend(struct ssb_bus *bus)
+ EXPORT_SYMBOL(ssb_bus_suspend);
+ 
+ #ifdef CONFIG_SSB_SPROM
+-int ssb_devices_freeze(struct ssb_bus *bus)
++/** ssb_devices_freeze - Freeze all devices on the bus.
++ *
++ * After freezing no device driver will be handling a device
++ * on this bus anymore. ssb_devices_thaw() must be called after
++ * a successful freeze to reactivate the devices.
++ *
++ * @bus: The bus.
++ * @ctx: Context structure. Pass this to ssb_devices_thaw().
++ */
++int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx)
+ {
+-	struct ssb_device *dev;
+-	struct ssb_driver *drv;
+-	int err = 0;
+-	int i;
+-	pm_message_t state = PMSG_FREEZE;
++	struct ssb_device *sdev;
++	struct ssb_driver *sdrv;
++	unsigned int i;
++
++	memset(ctx, 0, sizeof(*ctx));
++	ctx->bus = bus;
++	SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen));
+ 
+-	/* First check that we are capable to freeze all devices. */
+ 	for (i = 0; i < bus->nr_devices; i++) {
+-		dev = &(bus->devices[i]);
+-		if (!dev->dev ||
+-		    !dev->dev->driver ||
+-		    !device_is_registered(dev->dev))
+-			continue;
+-		drv = drv_to_ssb_drv(dev->dev->driver);
+-		if (!drv)
++		sdev = ssb_device_get(&bus->devices[i]);
++
++		if (!sdev->dev || !sdev->dev->driver ||
++		    !device_is_registered(sdev->dev)) {
++			ssb_device_put(sdev);
+ 			continue;
+-		if (!drv->suspend) {
+-			/* Nope, can't suspend this one. */
+-			return -EOPNOTSUPP;
+ 		}
+-	}
+-	/* Now suspend all devices */
+-	for (i = 0; i < bus->nr_devices; i++) {
+-		dev = &(bus->devices[i]);
+-		if (!dev->dev ||
+-		    !dev->dev->driver ||
+-		    !device_is_registered(dev->dev))
+-			continue;
+-		drv = drv_to_ssb_drv(dev->dev->driver);
+-		if (!drv)
++		sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
++		if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
++			ssb_device_put(sdev);
+ 			continue;
+-		err = drv->suspend(dev, state);
+-		if (err) {
+-			ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
+-				   dev_name(dev->dev));
+-			goto err_unwind;
+ 		}
++		sdrv->remove(sdev);
++		ctx->device_frozen[i] = 1;
+ 	}
+ 
+ 	return 0;
+-err_unwind:
+-	for (i--; i >= 0; i--) {
+-		dev = &(bus->devices[i]);
+-		if (!dev->dev ||
+-		    !dev->dev->driver ||
+-		    !device_is_registered(dev->dev))
+-			continue;
+-		drv = drv_to_ssb_drv(dev->dev->driver);
+-		if (!drv)
+-			continue;
+-		if (drv->resume)
+-			drv->resume(dev);
+-	}
+-	return err;
+ }
+ 
+-int ssb_devices_thaw(struct ssb_bus *bus)
++/** ssb_devices_thaw - Unfreeze all devices on the bus.
++ *
++ * This will re-attach the device drivers and re-init the devices.
++ *
++ * @ctx: The context structure from ssb_devices_freeze()
++ */
++int ssb_devices_thaw(struct ssb_freeze_context *ctx)
+ {
+-	struct ssb_device *dev;
+-	struct ssb_driver *drv;
+-	int err;
+-	int i;
++	struct ssb_bus *bus = ctx->bus;
++	struct ssb_device *sdev;
++	struct ssb_driver *sdrv;
++	unsigned int i;
++	int err, result = 0;
+ 
+ 	for (i = 0; i < bus->nr_devices; i++) {
+-		dev = &(bus->devices[i]);
+-		if (!dev->dev ||
+-		    !dev->dev->driver ||
+-		    !device_is_registered(dev->dev))
++		if (!ctx->device_frozen[i])
+ 			continue;
+-		drv = drv_to_ssb_drv(dev->dev->driver);
+-		if (!drv)
++		sdev = &bus->devices[i];
++
++		if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver))
+ 			continue;
+-		if (SSB_WARN_ON(!drv->resume))
++		sdrv = drv_to_ssb_drv(sdev->dev->driver);
++		if (SSB_WARN_ON(!sdrv || !sdrv->probe))
+ 			continue;
+-		err = drv->resume(dev);
++
++		err = sdrv->probe(sdev, &sdev->id);
+ 		if (err) {
+ 			ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
+-				   dev_name(dev->dev));
++				   dev_name(sdev->dev));
++			result = err;
+ 		}
++		ssb_driver_put(sdrv);
++		ssb_device_put(sdev);
+ 	}
+ 
+-	return 0;
++	return result;
+ }
+ #endif /* CONFIG_SSB_SPROM */
+ 
+@@ -472,6 +476,8 @@ static int ssb_devices_register(struct s
  		case SSB_BUSTYPE_SSB:
  			dev->dma_mask = &dev->coherent_dma_mask;
  			break;
@@ -137,7 +300,7 @@
  		}
  
  		sdev->dev = dev;
-@@ -1358,8 +1360,10 @@ static int __init ssb_modinit(void)
+@@ -1358,8 +1364,10 @@ static int __init ssb_modinit(void)
  	ssb_buses_lock();
  	err = ssb_attach_queued_buses();
  	ssb_buses_unlock();
@@ -149,7 +312,7 @@
  
  	err = b43_pci_ssb_bridge_init();
  	if (err) {
-@@ -1375,7 +1379,7 @@ static int __init ssb_modinit(void)
+@@ -1375,7 +1383,7 @@ static int __init ssb_modinit(void)
  		/* don't fail SSB init because of this */
  		err = 0;
  	}

target/linux/generic-2.6/patches-2.6.30/974-ssb_b43_default_on.patch

@@ -1,6 +1,14 @@
 --- a/drivers/ssb/Kconfig
 +++ b/drivers/ssb/Kconfig
-@@ -49,7 +49,7 @@ config SSB_PCIHOST
+@@ -29,6 +29,7 @@ config SSB_SPROM
+ config SSB_BLOCKIO
+ 	bool
+ 	depends on SSB
++	default y
+ 
+ config SSB_PCIHOST_POSSIBLE
+ 	bool
+@@ -49,7 +50,7 @@ config SSB_PCIHOST
  config SSB_B43_PCI_BRIDGE
  	bool
  	depends on SSB_PCIHOST

target/linux/generic-2.6/patches-2.6.32/974-ssb_b43_default_on.patch

@@ -1,6 +1,14 @@
 --- a/drivers/ssb/Kconfig
 +++ b/drivers/ssb/Kconfig
-@@ -49,7 +49,7 @@ config SSB_PCIHOST
+@@ -29,6 +29,7 @@ config SSB_SPROM
+ config SSB_BLOCKIO
+ 	bool
+ 	depends on SSB
++	default y
+ 
+ config SSB_PCIHOST_POSSIBLE
+ 	bool
+@@ -49,7 +50,7 @@ config SSB_PCIHOST
  config SSB_B43_PCI_BRIDGE
  	bool
  	depends on SSB_PCIHOST

target/linux/orion/base-files/etc/uci-defaults/hardware

@@ -28,6 +28,23 @@ set system.wifi_led.mode='link tx rx'
 set system.wifi_led.default='0'
 commit system
 __EOF
+
+# add mac address from U-Boot partition to lan and wan devices
+	MTD=`grep -e 'u-boot' /proc/mtd`
+	MTD=`echo ${MTD} | sed 's/[a-z]*\([0-9]*\):.*/\1/'`
+	[ -n "${MTD}" ] && {
+		MACADDR=`dd if=/dev/mtdblock${MTD} bs=1 skip=262048 count=6 2>/dev/null | hexdump -e '1/1 "%02x"'`
+		MACADDR2=$(( 0x${MACADDR} + 1))
+		MACADDR2=`printf "%012x" ${MACADDR2}`
+
+		MACADDR=`echo ${MACADDR} | sed 's/\(..\)/\1:/g' | sed 's/:$//'`
+		MACADDR2=`echo ${MACADDR2} | sed 's/\(..\)/\1:/g' | sed 's/:$//'`
+
+		uci set network.eth0.macaddr=${MACADDR}
+		uci set network.lan.macaddr=${MACADDR}
+		uci set network.wan.macaddr=${MACADDR2}
+		uci commit network
+	}
 }
 
 case "${hardware}" in

target/linux/rb532/image/Makefile

@@ -55,7 +55,7 @@ endef
 define Image/Build
 	$(CP) $(KDIR)/vmlinux.elf $(BIN_DIR)/$(IMG_PREFIX)-$(1).kernel
 	$(STAGING_DIR_HOST)/bin/patch-cmdline $(BIN_DIR)/$(IMG_PREFIX)-$(1).kernel '$(strip $(call Image/cmdline/$(1))) '
-	./gen_image.sh $(BIN_DIR)/$(IMG_PREFIX)-$(1).bin 4 $(BIN_DIR)/$(IMG_PREFIX)-$(1).kernel $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
+	./gen_image.sh $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).bin 4 $(BIN_DIR)/$(IMG_PREFIX)-$(1).kernel $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1)
 endef
 
 ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)

target/linux/x86/image/Config.in

@@ -1,91 +1,74 @@
 config X86_GRUB_IMAGES
 	bool "Build GRUB images (Linux x86 or x86_64 host only)"
 	depends TARGET_x86 && !TARGET_x86_olpc
-    depends TARGET_ROOTFS_EXT2FS || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS || TARGET_ROOTFS_ISO
+	depends TARGET_ROOTFS_EXT2FS || TARGET_ROOTFS_ISO || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS
 	select PACKAGE_grub
 	default y
 
-config X86_GRUB_IMAGES_PAD
-    bool "Pad GRUB images to filesystem size (for JFFS2)"
-    depends X86_GRUB_IMAGES
-
 config X86_GRUB_CONSOLE
-    bool
+	bool "Use Console Terminal (in addition to Serial)"
 	depends X86_GRUB_IMAGES
-    prompt "Use Console Terminal (in addition to Serial)"
+	default n if (TARGET_x86_generic_Soekris45xx || TARGET_x86_generic_Soekris48xx || TARGET_x86_net5501)
-    default n if TARGET_x86_generic_Soekris48xx || TARGET_x86_generic_Soekris45xx || TARGET_x86_net5501
+	default y
-    default y if ! (TARGET_x86_generic_Soekris48xx || TARGET_x86_generic_Soekris45xx || TARGET_x86_net5501)
 
 config X86_GRUB_SERIAL
-    string
+	string "Serial port device"
-    prompt "Serial port device"
 	depends X86_GRUB_IMAGES
 	default "hvc0" if TARGET_x86_xen_domu
-    default "ttyS0" if ! TARGET_x86_xen_domu
+	default "ttyS0"
 
 config X86_GRUB_BAUDRATE
 	int "Serial port baud rate"
 	depends X86_GRUB_IMAGES
-    default 19200 if TARGET_x86_generic_Soekris48xx || TARGET_x86_generic_Soekris45xx || TARGET_x86_net5501
+	default 19200 if TARGET_x86_generic_Soekris45xx || TARGET_x86_generic_Soekris48xx || TARGET_x86_net5501
-    default 38400 if ! (TARGET_x86_generic_Soekris48xx || TARGET_x86_generic_Soekris45xx || TARGET_x86_net5501)
+	default 38400
-
-config X86_GRUB_KERNELPART
-    int "Kernel partition size (in MB)"
-    depends X86_GRUB_IMAGES
-    default 4
-
-config X86_GRUB_ROOTPART
-    string
-    prompt "Root partition on target device" if X86_GRUB_IMAGES
-    default "/dev/xvda2" if TARGET_x86_xen_domu
-    default "/dev/sda2" if ! TARGET_x86_xen_domu
-    help
-        The root partition on the final device.  If you don't know,
-        you probably want the default (/dev/sda2).
 
 config X86_GRUB_BOOTOPTS
-    string
+	string "Extra kernel boot options"
-    prompt "Extra kernel boot options" if X86_GRUB_IMAGES
+	depends X86_GRUB_IMAGES
 	default "xencons=hvc" if TARGET_x86_xen_domu
-    default "" if ! TARGET_x86_xen_domu
 	help
 	  If you don't know, just leave it blank.
 
-
 config X86_VDI_IMAGES
-    bool "Build VirtualBox image files (VDI). Requires VBoxManage"
+	bool "Build VirtualBox image files (VDI)"
+	depends X86_GRUB_IMAGES
 	depends TARGET_x86_generic
 	depends TARGET_ROOTFS_EXT2FS
-    depends X86_GRUB_IMAGES
 	select PACKAGE_kmod-pcnet32
+	help
+	  Requires VBoxManage installed on the build system.
 
 config X86_VMDK_IMAGES
-    bool "Build VMware image files (VMDK). Requires qemu-img"
+	bool "Build VMware image files (VMDK)"
+	depends X86_GRUB_IMAGES
 	depends TARGET_x86_generic
 	depends TARGET_ROOTFS_EXT2FS
-    depends X86_GRUB_IMAGES
 	select PACKAGE_kmod-e1000
+	help
+	  Requires qemu-img installed on the build system.
+
 
 config OLPC_BOOTSCRIPT_IMAGES
 	bool "Build images with bootscript"
 	depends TARGET_x86_olpc
-    depends TARGET_ROOTFS_EXT2FS || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS || TARGET_ROOTFS_ISO
+	depends TARGET_ROOTFS_EXT2FS || TARGET_ROOTFS_ISO || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS
-    default y
 
-config OLPC_BOOTSCRIPT_IMAGES_PAD
-	bool "Pad bootscript images to filesystem size (for JFFS2)"
-	depends OLPC_BOOTSCRIPT_IMAGES
 
-config OLPC_BOOTSCRIPT_KERNELPART
+config TARGET_IMAGES_PAD
+	bool "Pad images to filesystem size (for JFFS2)"
+	depends OLPC_BOOTSCRIPT_IMAGES || X86_GRUB_IMAGES
+
+config TARGET_KERNEL_PARTSIZE
 	int "Kernel partition size (in MB)"
-    depends OLPC_BOOTSCRIPT_IMAGES
+	depends OLPC_BOOTSCRIPT_IMAGES || X86_GRUB_IMAGES
 	default 4
 
-config OLPC_BOOTSCRIPT_ROOTPART
+config TARGET_ROOTFS_PARTNAME
-    string
+	string "Root partition on target device"
-    prompt "Root partition on target device" if OLPC_BOOTSCRIPT_IMAGES
+	depends OLPC_BOOTSCRIPT_IMAGES || X86_GRUB_IMAGES
+	default "/dev/xvda2" if TARGET_x86_xen_domu
 	default "/dev/sda2"
 	help
 	  The root partition on the final device.  If you don't know,
 	  you probably want the default (/dev/sda2).
-

target/linux/x86/image/Makefile

@@ -29,12 +29,12 @@ ifneq ($(GRUB_TERMINALS),)
   GRUB_TERMINAL_CONFIG := terminal --timeout=2 $(GRUB_TERMINALS)
 endif
 
+ROOTPART:=$(call qstrip,$(CONFIG_TARGET_ROOTFS_PARTNAME))
 
 ifneq ($(CONFIG_X86_GRUB_IMAGES),)
  ifneq ($(HOST_OS),Darwin)
 
   BOOTOPTS:=$(call qstrip,$(CONFIG_X86_GRUB_BOOTOPTS))
-  ROOTPART:=$(call qstrip,$(CONFIG_X86_GRUB_ROOTPART))
 
   define Image/cmdline/ext2
     root=$(ROOTPART) rootfstype=ext2 rootwait
@@ -66,10 +66,10 @@ ifneq ($(CONFIG_X86_GRUB_IMAGES),)
 		-e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
 		-e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \
 		./menu.lst > $(KDIR)/root.grub/boot/grub/menu.lst
-	PADDING="$(CONFIG_X86_GRUB_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_x86.sh \
+	PADDING="$(CONFIG_TARGET_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_x86.sh \
 		$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
-		$(CONFIG_X86_GRUB_KERNELPART) $(KDIR)/root.grub \
+		$(CONFIG_TARGET_KERNEL_PARTSIZE) $(KDIR)/root.grub \
-		$(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
+		$(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1)
 	$(call Image/Build/grub/$(1))
   endef
 
@@ -88,8 +88,8 @@ ifneq ($(CONFIG_X86_GRUB_IMAGES),)
   define Image/Build/grub
 	PADDING="$(CONFIG_X86_GRUB_IMAGES_PAD)" PATH="$(TARGET_PATH)" NOGRUB=1 ./gen_image_x86.sh \
 		$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
-		$(CONFIG_X86_GRUB_KERNELPART) "" \
+		$(CONFIG_TARGET_KERNEL_PARTSIZE) "" \
-		$(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
+		$(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1)
   endef
 
  endif
@@ -99,8 +99,6 @@ ROOTDELAY=10
 
 ifneq ($(CONFIG_OLPC_BOOTSCRIPT_IMAGES),)
 
-  ROOTPART:=$(call qstrip,$(CONFIG_OLPC_BOOTSCRIPT_ROOTPART))
-
   define Image/cmdline/ext2
     root=$(ROOTPART) rootfstype=ext2 rootwait
   endef
@@ -123,10 +121,10 @@ ifneq ($(CONFIG_OLPC_BOOTSCRIPT_IMAGES),)
 	$(CP) $(KDIR)/bzImage $(KDIR)/root.bootscript/boot/vmlinuz
 	sed -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1))) $(BOOTOPTS)#g' \
 		./olpc.fth > $(KDIR)/root.bootscript/boot/olpc.fth
-	PADDING="$(CONFIG_OLPC_BOOTSCRIPT_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_olpc.sh \
+	PADDING="$(CONFIG_TARGET_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_olpc.sh \
 		$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
-		$(CONFIG_OLPC_BOOTSCRIPT_KERNELPART) $(KDIR)/root.bootscript \
+		$(CONFIG_TARGET_KERNEL_PARTSIZE) $(KDIR)/root.bootscript \
-		$(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
+		$(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1)
   endef
 
 endif