split usb packages and add usb2 support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@518 3c298f89-4303-0410-b956-a3cf2f4a3e73

openwrt/package/linux/Config.in

@@ -43,11 +43,40 @@ config BR2_PACKAGE_KMOD_CIFS
 	  Kernel modules for CIFS support
 
 config BR2_PACKAGE_KMOD_USB
-	tristate "USB/SCSI support"
+	tristate "USB support"
 	default m
-	help
+
-	  Kernel modules for USB/SCSI support
+config BR2_PACKAGE_KMOD_USB_CONTROLLER
-	  Includes usb-storage and printer
+	tristate
+	depends on BR2_PACKAGE_KMOD_USB_UHCI || BR2_PACKAGE_KMOD_USB_OHCI
+	default n
+
+config BR2_PACKAGE_KMOD_USB_UHCI
+	tristate "Support for UHCI controllers"
+	default m
+	depends BR2_PACKAGE_KMOD_USB
+	select BR2_PACKAGE_KMOD_USB_CONTROLLER
+
+config BR2_PACKAGE_KMOD_USB_OHCI
+	tristate "Support for OHCI controllers"
+	default m
+	depends BR2_PACKAGE_KMOD_USB
+	select BR2_PACKAGE_KMOD_USB_CONTROLLER
+
+config BR2_PACKAGE_KMOD_USB2
+	tristate "Support for USB 2.0 controllers"
+	default m
+	depends BR2_PACKAGE_KMOD_USB_CONTROLLER
+
+config BR2_PACKAGE_KMOD_USB_STORAGE
+	tristate "Support for USB storage devices"
+	default m
+	depends BR2_PACKAGE_KMOD_USB_CONTROLLER
+
+config BR2_PACKAGE_KMOD_USB_PRINTER
+	tristate "Support for USB printers"
+	default m
+	depends BR2_PACKAGE_KMOD_USB_CONTROLLER
 
 config BR2_PACKAGE_KMOD_VFAT
 	tristate "VFAT filesystem support"

openwrt/package/linux/Makefile

@@ -61,11 +61,25 @@ $(eval $(call KMOD_template,NFS,nfs,\
 	$(MODULES_DIR)/kernel/fs/nfs/*.o \
 	$(MODULES_DIR)/kernel/net/sunrpc/*.o \
 ,CONFIG_NFS_FS))
-$(eval $(call KMOD_template,USB,usb,\
+$(eval $(call KMOD_template,USB,usb-core,\
-	$(MODULES_DIR)/kernel/drivers/scsi/*.o \
+	$(MODULES_DIR)/kernel/drivers/usb/usbcore.o \
-	$(MODULES_DIR)/kernel/drivers/usb/*.o \
-	$(MODULES_DIR)/kernel/drivers/usb/*/*.o \
 ,CONFIG_USB))
+$(eval $(call KMOD_template,USB_UHCI,usb-uhci,\
+	$(MODULES_DIR)/kernel/drivers/usb/host/uhci.o \
+,CONFIG_USB_UHCI_ALT))
+$(eval $(call KMOD_template,USB_OHCI,usb-ohci,\
+	$(MODULES_DIR)/kernel/drivers/usb/host/usb-ohci.o \
+,CONFIG_USB_OHCI))
+$(eval $(call KMOD_template,USB2,usb2,\
+	$(MODULES_DIR)/kernel/drivers/usb/host/ehci-hcd.o \
+,CONFIG_USB_EHCI_HCD))
+$(eval $(call KMOD_template,USB_STORAGE,usb-storage,\
+	$(MODULES_DIR)/kernel/drivers/scsi/*.o \
+	$(MODULES_DIR)/kernel/drivers/usb/storage/*.o \
+,CONFIG_USB_STORAGE))
+$(eval $(call KMOD_template,USB_PRINTER,usb-printer,\
+	$(MODULES_DIR)/kernel/drivers/usb/printer.o \
+,CONFIG_USB_PRINTER))
 $(eval $(call KMOD_template,LP,lp,\
 	$(MODULES_DIR)/kernel/drivers/parport/parport.o \
 	$(MODULES_DIR)/kernel/drivers/parport/parport_splink.o \

openwrt/package/linux/control/kmod-usb-core.control

@@ -1,6 +1,6 @@
-Package: kmod-usb
+Package: kmod-usb-core
 Priority: optional
 Section: sys
 Maintainer: Felix Fietkau <nbd@vd-s.ath.cx>
 Source: buildroot internal
-Description: Kernel modules for USB/SCSI support
+Description: Kernel Support for USB

openwrt/package/linux/control/kmod-usb-ohci.control

@@ -0,0 +1,7 @@
+Package: kmod-usb-ohci
+Priority: optional
+Section: sys
+Maintainer: Felix Fietkau <nbd@vd-s.ath.cx>
+Source: buildroot internal
+Depends: kmod-usb-core
+Description: Kernel driver for OHCI USB controllers

openwrt/package/linux/control/kmod-usb-printer.control

@@ -0,0 +1,6 @@
+Package: kmod-usb-printer
+Priority: optional
+Section: sys
+Maintainer: Felix Fietkau <nbd@vd-s.ath.cx>
+Source: buildroot internal
+Description: Kernel modules for USB Printer support

openwrt/package/linux/control/kmod-usb-storage.control

@@ -0,0 +1,6 @@
+Package: kmod-usb-storage
+Priority: optional
+Section: sys
+Maintainer: Felix Fietkau <nbd@vd-s.ath.cx>
+Source: buildroot internal
+Description: Kernel modules for USB storage support

openwrt/package/linux/control/kmod-usb-uhci.control

@@ -0,0 +1,7 @@
+Package: kmod-usb-uhci
+Priority: optional
+Section: sys
+Maintainer: Felix Fietkau <nbd@vd-s.ath.cx>
+Source: buildroot internal
+Depends: kmod-usb-core
+Description: Kernel driver for UHCI USB controllers

openwrt/package/linux/control/kmod-usb2.control

@@ -0,0 +1,7 @@
+Package: kmod-usb2
+Priority: optional
+Section: sys
+Maintainer: Felix Fietkau <nbd@vd-s.ath.cx>
+Source: buildroot internal
+Depends: kmod-usb-core
+Description: Kernel driver for USB2 controllers

openwrt/package/linux/linux.config

@@ -1,5 +1,5 @@
 #
-# Automatically generated make config: don't edit
+# Automatically generated by make menuconfig: don't edit
 #
 CONFIG_MIPS=y
 CONFIG_MIPS32=y
@@ -181,10 +181,6 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_CONCAT is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
@@ -250,10 +246,6 @@ CONFIG_MTD_SFLASH=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_MTDRAM is not set
 # CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
 # CONFIG_MTD_DOC1000 is not set
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
@@ -436,10 +428,6 @@ CONFIG_IP6_NF_TARGET_MARK=m
 # CONFIG_IP_SCTP is not set
 # CONFIG_ATM is not set
 CONFIG_VLAN_8021Q=y
-
-#
-#  
-#
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_DECNET is not set
@@ -524,20 +512,12 @@ CONFIG_NET_CLS_POLICE=y
 # SCSI support
 #
 CONFIG_SCSI=m
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
 CONFIG_SD_EXTRA_DEVS=5
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_DEBUG_QUEUES is not set
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
@@ -721,10 +701,6 @@ CONFIG_NET_RADIO=y
 # CONFIG_PLX_HERMES is not set
 # CONFIG_TMD_HERMES is not set
 # CONFIG_PCI_HERMES is not set
-
-#
-# Prism54 PCI/PCMCIA GT/Duette Driver - 802.11(a/b/g)
-#
 # CONFIG_PRISM54 is not set
 CONFIG_NET_WIRELESS=y
 
@@ -796,14 +772,6 @@ CONFIG_PRINTER=m
 # Joysticks
 #
 # CONFIG_INPUT_GAMEPORT is not set
-
-#
-# Input core support is needed for gameports
-#
-
-#
-# Input core support is needed for joysticks
-#
 # CONFIG_QIC02_TAPE is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_IPMI_PANIC_EVENT is not set
@@ -1033,24 +1001,12 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
-
+CONFIG_USB_EHCI_HCD=m
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_UHCI is not set
-# CONFIG_USB_UHCI_ALT is not set
+CONFIG_USB_UHCI_ALT=m
 CONFIG_USB_OHCI=m
-
-#
-# USB Device Class drivers
-#
 # CONFIG_USB_AUDIO is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_BLUETOOTH is not set
@@ -1067,15 +1023,7 @@ CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=m
-
-#
-# USB Human Interface Devices (HID)
-#
 # CONFIG_USB_HID is not set
-
-#
-#     Input core support is needed for USB HID input layer or HIDBP support
-#
 # CONFIG_USB_HIDINPUT is not set
 # CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_KBD is not set
@@ -1084,47 +1032,23 @@ CONFIG_USB_PRINTER=m
 # CONFIG_USB_WACOM is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-
-#
-# USB Imaging devices
-#
 # CONFIG_USB_DC2XX is not set
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_SCANNER is not set
 # CONFIG_USB_MICROTEK is not set
 # CONFIG_USB_HPUSBSCSI is not set
-
-#
-# USB Multimedia devices
-#
-
-#
-#   Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network adaptors
-#
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_CATC is not set
 # CONFIG_USB_CDCETHER is not set
 # CONFIG_USB_USBNET is not set
-
-#
-# USB port drivers
-#
 # CONFIG_USB_USS720 is not set
 
 #
 # USB Serial Converter support
 #
 # CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_TIGL is not set