ar71xx: 2.6.33 patches

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2024-12-24 21:29:55 +02:00 · 2010-02-28 16:33:15 +00:00 · 2010-02-28 16:33:15 +00:00 · 518b748f5f
commit 518b748f5f
parent a569d19be4
29 changed files with 1293 additions and 0 deletions
--- a/target/linux/ar71xx/config-2.6.33
+++ b/target/linux/ar71xx/config-2.6.33
@ -0,0 +1,296 @@
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+# CONFIG_AB4500_CORE is not set
+# CONFIG_AD525X_DPOT is not set
+CONFIG_AG71XX=y
+CONFIG_AG71XX_AR8216_SUPPORT=y
+# CONFIG_AG71XX_DEBUG is not set
+# CONFIG_AG71XX_DEBUG_FS is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_AR7 is not set
+CONFIG_AR71XX_DEV_AP91_ETH=y
+CONFIG_AR71XX_DEV_AP91_PCI=y
+CONFIG_AR71XX_DEV_AP94_PCI=y
+CONFIG_AR71XX_DEV_AR913X_WMAC=y
+CONFIG_AR71XX_DEV_DSA=y
+CONFIG_AR71XX_DEV_GPIO_BUTTONS=y
+CONFIG_AR71XX_DEV_LEDS_GPIO=y
+CONFIG_AR71XX_DEV_M25P80=y
+CONFIG_AR71XX_DEV_PB42_PCI=y
+CONFIG_AR71XX_DEV_USB=y
+CONFIG_AR71XX_MACH_AP81=y
+CONFIG_AR71XX_MACH_AP83=y
+CONFIG_AR71XX_MACH_AW_NR580=y
+CONFIG_AR71XX_MACH_DIR_600_A1=y
+CONFIG_AR71XX_MACH_DIR_615_C1=y
+CONFIG_AR71XX_MACH_DIR_825_B1=y
+CONFIG_AR71XX_MACH_MZK_W04NU=y
+CONFIG_AR71XX_MACH_MZK_W300NH=y
+CONFIG_AR71XX_MACH_PB42=y
+CONFIG_AR71XX_MACH_PB44=y
+CONFIG_AR71XX_MACH_RB_4XX=y
+CONFIG_AR71XX_MACH_TEW_632BRP=y
+CONFIG_AR71XX_MACH_TL_WR1043ND=y
+CONFIG_AR71XX_MACH_TL_WR741ND=y
+CONFIG_AR71XX_MACH_TL_WR841N_V1=y
+CONFIG_AR71XX_MACH_TL_WR941ND=y
+CONFIG_AR71XX_MACH_UBNT=y
+CONFIG_AR71XX_MACH_WNDR3700=y
+CONFIG_AR71XX_MACH_WNR2000=y
+CONFIG_AR71XX_MACH_WP543=y
+CONFIG_AR71XX_MACH_WRT160NL=y
+CONFIG_AR71XX_MACH_WRT400N=y
+CONFIG_AR71XX_MACH_WZR_HP_G300NH=y
+CONFIG_AR71XX_NVRAM=y
+CONFIG_AR71XX_WDT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ATHEROS_AR71XX=y
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
+CONFIG_BITREVERSE=y
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR2=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_DEFAULT_SECURITY_DAC=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEVPORT=y
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_FSNOTIFY is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_ADP5588 is not set
+# CONFIG_GPIO_CS5535 is not set
+CONFIG_GPIO_NXP_74HC153=y
+CONFIG_GPIO_PCF857X=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HW_HAS_PCI=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_GPIO=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+# CONFIG_INITRAMFS_COMPRESSION_LZO is not set
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_SOURCE="../../root"
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_IRQ_CPU=y
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LT3593 is not set
+# CONFIG_LEDS_WNDR3700_USB is not set
+CONFIG_LOONGSON_UART_BASE=y
+# CONFIG_M25PXX_USE_FAST_READ is not set
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_LOONGSON is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_MFD_88PM8607 is not set
+CONFIG_MICREL_PHY=y
+# CONFIG_MIKROTIK_RB532 is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_COBALT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MACHINE=y
+# CONFIG_MIPS_MALTA is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_SIM is not set
+CONFIG_MTD_AR91XX_FLASH=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_MYLOADER_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_RB4XX=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_WRT160NL_PARTS=y
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_MYLOADER=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_MV88E6060=y
+CONFIG_NET_DSA_MV88E6063=y
+# CONFIG_NET_DSA_MV88E6123_61_65 is not set
+# CONFIG_NET_DSA_MV88E6131 is not set
+# CONFIG_NET_DSA_MV88E6XXX is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+# CONFIG_NET_DSA_TAG_DSA is not set
+# CONFIG_NET_DSA_TAG_EDSA is not set
+CONFIG_NET_DSA_TAG_TRAILER=y
+# CONFIG_NO_IOPORT is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PHYLIB=y
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_POWERTV is not set
+# CONFIG_R8187SE is not set
+# CONFIG_RAMZSWAP is not set
+CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366RB_PHY=y
+CONFIG_RTL8366S_PHY=y
+CONFIG_RTL8366_SMI=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SPI=y
+CONFIG_SPI_AP83=y
+CONFIG_SPI_AR71XX=y
+CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_DESIGNWARE is not set
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_PB44=y
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_VSC7385 is not set
+# CONFIG_SPI_XILINX is not set
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+# CONFIG_TC35815 is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_TI_DAC7512 is not set
+CONFIG_TRAD_SIGNALS=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+CONFIG_USB_SUPPORT=y
+CONFIG_YAFFS_9BYTE_TAGS=y
+CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+CONFIG_YAFFS_FS=y
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+CONFIG_YAFFS_YAFFS1=y
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_ZONE_DMA_FLAG=0
--- a/target/linux/ar71xx/patches-2.6.33/001-ar71xx_core.patch
+++ b/target/linux/ar71xx/patches-2.6.33/001-ar71xx_core.patch
@ -0,0 +1,54 @@
+Index: linux-2.6.33/arch/mips/Makefile
+===================================================================
+--- linux-2.6.33.orig/arch/mips/Makefile	2010-02-28 16:43:15.000000000 +0100
+++ linux-2.6.33/arch/mips/Makefile	2010-02-28 16:45:56.397211344 +0100
+@@ -637,6 +637,13 @@
+ load-$(CONFIG_CPU_CAVIUM_OCTEON) 	+= 0xffffffff81100000
+ endif
+ 
+#
+# Atheros AR71xx
+#
+core-$(CONFIG_ATHEROS_AR71XX)	+= arch/mips/ar71xx/
+cflags-$(CONFIG_ATHEROS_AR71XX)	+= -I$(srctree)/arch/mips/include/asm/mach-ar71xx
+load-$(CONFIG_ATHEROS_AR71XX)	+= 0xffffffff80060000
+
+ # temporary until string.h is fixed
+ cflags-y += -ffreestanding
+ 
+Index: linux-2.6.33/arch/mips/Kconfig
+===================================================================
+--- linux-2.6.33.orig/arch/mips/Kconfig	2010-02-28 16:43:15.000000000 +0100
+++ linux-2.6.33/arch/mips/Kconfig	2010-02-28 16:46:56.150331076 +0100
+@@ -48,6 +48,23 @@
+ 	  Support for the Texas Instruments AR7 System-on-a-Chip
+ 	  family: TNETD7100, 7200 and 7300.
+ 
+config ATHEROS_AR71XX
+	bool "Atheros AR71xx based boards"
+	select CEVT_R4K
+	select CSRC_R4K
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select ARCH_REQUIRE_GPIOLIB
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
+	select MIPS_MACHINE
+	help
+	  Support for Atheros AR71xx based boards.
+
+ config BCM47XX
+ 	bool "BCM47XX based boards"
+ 	select CEVT_R4K
+@@ -682,6 +699,7 @@
+ endchoice
+ 
+ source "arch/mips/alchemy/Kconfig"
+source "arch/mips/ar71xx/Kconfig"
+ source "arch/mips/bcm63xx/Kconfig"
+ source "arch/mips/jazz/Kconfig"
+ source "arch/mips/lasat/Kconfig"
--- a/target/linux/ar71xx/patches-2.6.33/002-ar71xx_pci.patch
+++ b/target/linux/ar71xx/patches-2.6.33/002-ar71xx_pci.patch
@ -0,0 +1,10 @@
+--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
+ obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o
+ obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o fixup-bcm63xx.o \
+ 					ops-bcm63xx.o
+obj-$(CONFIG_ATHEROS_AR71XX)	+= pci-ar71xx.o pci-ar724x.o
+ 
+ #
+ # These are still pretty much in the old state, watch, go blind.
--- a/target/linux/ar71xx/patches-2.6.33/003-ar71xx_usb_host.patch
+++ b/target/linux/ar71xx/patches-2.6.33/003-ar71xx_usb_host.patch
@ -0,0 +1,58 @@
+--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
+@@ -98,6 +98,13 @@ config USB_EHCI_BIG_ENDIAN_DESC
+ 	depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
+ 	default y
+ 
+config USB_EHCI_AR71XX
+	bool "USB EHCI support for AR71xx"
+	depends on USB_EHCI_HCD && ATHEROS_AR71XX
+	default y
+	help
+	  Support for Atheros AR71xx built-in EHCI controller
+
+ config USB_EHCI_FSL
+ 	bool "Support for Freescale on-chip EHCI USB controller"
+ 	depends on USB_EHCI_HCD && FSL_SOC
+@@ -189,6 +196,13 @@ config USB_OHCI_HCD
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called ohci-hcd.
+ 
+config USB_OHCI_AR71XX
+	bool "USB OHCI support for Atheros AR71xx"
+	depends on USB_OHCI_HCD && ATHEROS_AR71XX
+	default y
+	help
+	  Support for Atheros AR71xx built-in OHCI controller
+
+ config USB_OHCI_HCD_PPC_SOC
+ 	bool "OHCI support for on-chip PPC USB controller"
+ 	depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
+--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
+@@ -1141,6 +1141,11 @@ MODULE_LICENSE ("GPL");
+ #define	PLATFORM_DRIVER		ehci_atmel_driver
+ #endif
+ 
+#ifdef CONFIG_USB_EHCI_AR71XX
+#include "ehci-ar71xx.c"
+#define PLATFORM_DRIVER		ehci_ar71xx_driver
+#endif
+
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
+ #error "missing bus glue for ehci-hcd"
+--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
+@@ -1085,6 +1085,11 @@ MODULE_LICENSE ("GPL");
+ #define TMIO_OHCI_DRIVER	ohci_hcd_tmio_driver
+ #endif
+ 
+#ifdef CONFIG_USB_OHCI_AR71XX
+#include "ohci-ar71xx.c"
+#define PLATFORM_DRIVER		ohci_hcd_ar71xx_driver
+#endif
+
+ #if	!defined(PCI_DRIVER) &&		\
+ 	!defined(PLATFORM_DRIVER) &&	\
+ 	!defined(OF_PLATFORM_DRIVER) &&	\
--- a/target/linux/ar71xx/patches-2.6.33/004-ar71xx_spi_controller.patch
+++ b/target/linux/ar71xx/patches-2.6.33/004-ar71xx_spi_controller.patch
@ -0,0 +1,26 @@
+--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
+@@ -53,6 +53,13 @@ if SPI_MASTER
+ 
+ comment "SPI Master Controller Drivers"
+ 
+config SPI_AR71XX
+	tristate "Atheros AR71xx SPI Controller"
+	depends on SPI_MASTER && ATHEROS_AR71XX
+	select SPI_BITBANG
+	help
+	  This is the SPI contoller driver for Atheros AR71xx.
+
+ config SPI_ATMEL
+ 	tristate "Atmel SPI Controller"
+ 	depends on (ARCH_AT91 || AVR32)
+--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
+@@ -11,6 +11,7 @@ endif
+ obj-$(CONFIG_SPI_MASTER)		+= spi.o
+ 
+ # SPI master controller drivers (bus)
+obj-$(CONFIG_SPI_AR71XX)		+= ar71xx_spi.o
+ obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
+ obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
+ obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
--- a/target/linux/ar71xx/patches-2.6.33/005-ar71xx_mac_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/005-ar71xx_mac_driver.patch
@ -0,0 +1,21 @@
+--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
+@@ -2126,6 +2126,8 @@ config ACENIC_OMIT_TIGON_I
+ 
+ 	  The safe and default value for this is N.
+ 
+source drivers/net/ag71xx/Kconfig
+
+ config DL2K
+ 	tristate "DL2000/TC902x-based Gigabit Ethernet support"
+ 	depends on PCI
+--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
+@@ -106,6 +106,7 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac/
+ # end link order section
+ #
+ 
+obj-$(CONFIG_AG71XX) += ag71xx/
+ obj-$(CONFIG_SUNDANCE) += sundance.o
+ obj-$(CONFIG_HAMACHI) += hamachi.o
+ obj-$(CONFIG_NET) += Space.o loopback.o
--- a/target/linux/ar71xx/patches-2.6.33/006-ar71xx_wdt_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/006-ar71xx_wdt_driver.patch
@ -0,0 +1,26 @@
+--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
+@@ -850,6 +850,13 @@ config TXX9_WDT
+ 	help
+ 	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+ 
+config AR71XX_WDT
+	tristate "Atheros AR71xx Watchdog Timer"
+	depends on ATHEROS_AR71XX
+	help
+	  Hardware driver for the built-in watchdog timer on the Atheros
+	  AR71xx SoCs.
+
+ # PARISC Architecture
+ 
+ # POWERPC Architecture
+--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
+@@ -113,6 +113,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o
+ 
+ # PARISC Architecture
+ 
--- a/target/linux/ar71xx/patches-2.6.33/007-ar91xx_flash_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/007-ar91xx_flash_driver.patch
@ -0,0 +1,26 @@
+--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
+@@ -259,6 +259,13 @@ config MTD_ALCHEMY
+ 	help
+ 	  Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
+ 
+config MTD_AR91XX_FLASH
+	tristate "Atheros AR91xx parallel flash support"
+	depends on ATHEROS_AR71XX
+	select MTD_COMPLEX_MAPPINGS
+	help
+	  Parallel flash driver for the Atheros AR91xx based boards.
+
+ config MTD_DILNETPC
+ 	tristate "CFI Flash device mapped on DIL/Net PC"
+ 	depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
+--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
+@@ -41,6 +41,7 @@ obj-$(CONFIG_MTD_DBOX2)		+= dbox2-flash.
+ obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
+ obj-$(CONFIG_MTD_PCI)		+= pci.o
+ obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
+obj-$(CONFIG_MTD_AR91XX_FLASH)	+= ar91xx_flash.o
+ obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
+ obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
+ obj-$(CONFIG_MTD_IMPA7)		+= impa7.o
--- a/target/linux/ar71xx/patches-2.6.33/101-ksz8041_phy_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/101-ksz8041_phy_driver.patch
@ -0,0 +1,24 @@
+--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
+@@ -114,6 +114,11 @@ config RTL8306_PHY
+ 	tristate "Driver for Realtek RTL8306S switches"
+ 	select SWCONFIG
+ 
+config MICREL_PHY
+	tristate "Drivers for Micrel/Kendin PHYs"
+	---help---
+	  Currently has a driver for the KSZ8041
+
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi
+ obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
+ obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+obj-$(CONFIG_MICREL)		+= micrel.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
+ obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
--- a/target/linux/ar71xx/patches-2.6.33/102-mtd_m25p80_add_myloader_parser.patch
+++ b/target/linux/ar71xx/patches-2.6.33/102-mtd_m25p80_add_myloader_parser.patch
@ -0,0 +1,19 @@
+--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
+@@ -867,6 +867,16 @@ static int __devinit m25p_probe(struct s
+ 					part_probes, &parts, 0);
+ 		}
+ 
+#ifdef CONFIG_MTD_MYLOADER_PARTS
+		if (nr_parts <= 0) {
+			static const char *part_probes[]
+					= { "MyLoader", NULL, };
+
+			nr_parts = parse_mtd_partitions(&flash->mtd,
+					part_probes, &parts, 0);
+		}
+#endif
+
+ 		if (nr_parts <= 0 && data && data->parts) {
+ 			parts = data->parts;
+ 			nr_parts = data->nr_parts;
--- a/target/linux/ar71xx/patches-2.6.33/104-mtd_m25p80_add_redboot_parser.patch
+++ b/target/linux/ar71xx/patches-2.6.33/104-mtd_m25p80_add_redboot_parser.patch
@ -0,0 +1,18 @@
+--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
+@@ -877,6 +877,15 @@ static int __devinit m25p_probe(struct s
+ 		}
+ #endif
+ 
+#ifdef CONFIG_MTD_REDBOOT_PARTS
+		if (nr_parts <= 0) {
+			static const char *part_probes[]
+					= { "RedBoot", NULL, };
+
+			nr_parts = parse_mtd_partitions(&flash->mtd,
+					part_probes, &parts, 0);
+		}
+#endif
+ 		if (nr_parts <= 0 && data && data->parts) {
+ 			parts = data->parts;
+ 			nr_parts = data->nr_parts;
--- a/target/linux/ar71xx/patches-2.6.33/107-mtd-SST39VF6401B-support.patch
+++ b/target/linux/ar71xx/patches-2.6.33/107-mtd-SST39VF6401B-support.patch
@ -0,0 +1,29 @@
+--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
+@@ -166,6 +166,7 @@
+ #define SST39LF160	0x2782
+ #define SST39VF1601	0x234b
+ #define SST39VF3201	0x235b
+#define SST39VF6401B	0x236d
+ #define SST39LF512	0x00D4
+ #define SST39LF010	0x00D5
+ #define SST39LF020	0x00D6
+@@ -1556,6 +1557,18 @@ static const struct amd_flash_info jedec
+ 			ERASEINFO(0x10000,64),
+ 		}
+ 	}, {
+		.mfr_id         = MANUFACTURER_SST,
+		.dev_id         = SST39VF6401B,
+		.name           = "SST 39VF6401B",
+		.devtypes       = CFI_DEVICETYPE_X16,
+		.uaddr          = MTD_UADDR_0xAAAA_0x5555,
+		.dev_size       = SIZE_8MiB,
+		.cmd_set        = P_ID_AMD_STD,
+		.nr_regions     = 1,
+		.regions        = {
+			ERASEINFO(0x10000,128)
+		}
+	}, {
+ 		.mfr_id		= MANUFACTURER_ST,
+ 		.dev_id		= M29F800AB,
+ 		.name		= "ST M29F800AB",
--- a/target/linux/ar71xx/patches-2.6.33/108-mtd_fix_cfi_cmdset_0002_status_check.patch
+++ b/target/linux/ar71xx/patches-2.6.33/108-mtd_fix_cfi_cmdset_0002_status_check.patch
@ -0,0 +1,69 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1141,8 +1141,8 @@ static int __xipram do_write_oneword(str
+ 			break;
+ 		}
+ 
+-		if (chip_ready(map, adr))
+-			break;
+		if (chip_good(map, adr, datum))
+			goto enable_xip;
+ 
+ 		/* Latency issues. Drop the lock, wait a while and retry */
+ 		UDELAY(map, chip, adr, 1);
+@@ -1158,6 +1158,8 @@ static int __xipram do_write_oneword(str
+ 
+ 		ret = -EIO;
+ 	}
+
+ enable_xip:
+ 	xip_enable(map, chip, adr);
+  op_done:
+ 	chip->state = FL_READY;
+@@ -1504,7 +1506,6 @@ static int cfi_amdstd_write_buffers(stru
+ 	return 0;
+ }
+ 
+-
+ /*
+  * Handle devices with one erase region, that only implement
+  * the chip erase command.
+@@ -1568,8 +1569,8 @@ static int __xipram do_erase_chip(struct
+ 			chip->erase_suspended = 0;
+ 		}
+ 
+-		if (chip_ready(map, adr))
+-			break;
+		if (chip_good(map, adr, map_word_ff(map)))
+			goto op_done;
+ 
+ 		if (time_after(jiffies, timeo)) {
+ 			printk(KERN_WARNING "MTD %s(): software timeout\n",
+@@ -1589,6 +1590,7 @@ static int __xipram do_erase_chip(struct
+ 		ret = -EIO;
+ 	}
+ 
+ op_done:
+ 	chip->state = FL_READY;
+ 	xip_enable(map, chip, adr);
+ 	put_chip(map, chip, adr);
+@@ -1656,9 +1658,9 @@ static int __xipram do_erase_oneblock(st
+ 			chip->erase_suspended = 0;
+ 		}
+ 
+-		if (chip_ready(map, adr)) {
+		if (chip_good(map, adr, map_word_ff(map))) {
+ 			xip_enable(map, chip, adr);
+-			break;
+			goto op_done;
+ 		}
+ 
+ 		if (time_after(jiffies, timeo)) {
+@@ -1680,6 +1682,7 @@ static int __xipram do_erase_oneblock(st
+ 		ret = -EIO;
+ 	}
+ 
+ op_done:
+ 	chip->state = FL_READY;
+ 	put_chip(map, chip, adr);
+ 	spin_unlock(chip->mutex);
--- a/target/linux/ar71xx/patches-2.6.33/109-mtd-wrt160nl-trx-parser.patch
+++ b/target/linux/ar71xx/patches-2.6.33/109-mtd-wrt160nl-trx-parser.patch
@ -0,0 +1,44 @@
+--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
+@@ -886,6 +886,16 @@ static int __devinit m25p_probe(struct s
+ 					part_probes, &parts, 0);
+ 		}
+ #endif
+
+#ifdef CONFIG_MTD_WRT160NL_PARTS
+		if (nr_parts <= 0) {
+			static const char *part_probes[]
+					= { "wrt160nl", NULL, };
+
+			nr_parts = parse_mtd_partitions(&flash->mtd,
+					part_probes, &parts, 0);
+		}
+#endif
+ 		if (nr_parts <= 0 && data && data->parts) {
+ 			parts = data->parts;
+ 			nr_parts = data->nr_parts;
+--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
+@@ -181,6 +181,12 @@ config MTD_AR7_PARTS
+ 	---help---
+ 	  TI AR7 partitioning support
+ 
+config MTD_WRT160NL_PARTS
+	tristate "Linksys WRT160NL partitioning support"
+	depends on MTD_PARTITIONS && AR71XX_MACH_WRT160NL
+	---help---
+	   Linksys WRT160NL partitioning support
+
+ config MTD_MYLOADER_PARTS
+ 	tristate "MyLoader partition parsing"
+ 	depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX)
+--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
+@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
+ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
+ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
+ obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ 
--- a/target/linux/ar71xx/patches-2.6.33/110-usb-ehci-add-war-for-synopsys-hc-bug.patch
+++ b/target/linux/ar71xx/patches-2.6.33/110-usb-ehci-add-war-for-synopsys-hc-bug.patch
@ -0,0 +1,22 @@
+--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
+@@ -1172,6 +1172,9 @@ static void end_unlink_async (struct ehc
+ 		ehci->reclaim = NULL;
+ 		start_unlink_async (ehci, next);
+ 	}
+
+	if (ehci->has_synopsys_hc_bug)
+		writel((u32)ehci->async->qh_dma, &ehci->regs->async_next);
+ }
+ 
+ /* makes sure the async qh will become idle */
+--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
+@@ -129,6 +129,7 @@ struct ehci_hcd {			/* one per controlle
+ 	unsigned		has_amcc_usb23:1;
+ 	unsigned		need_io_watchdog:1;
+ 	unsigned		broken_periodic:1;
+	unsigned		has_synopsys_hc_bug:1; /* Synopsys HC */
+ 
+ 	/* required for usb32 quirk */
+ 	#define OHCI_CTRL_HCFS          (3 << 6)
--- a/target/linux/ar71xx/patches-2.6.33/111-mtd-cfi_cmdset_0002-force-word-write.patch
+++ b/target/linux/ar71xx/patches-2.6.33/111-mtd-cfi_cmdset_0002-force-word-write.patch
@ -0,0 +1,61 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -39,7 +39,7 @@
+ #include <linux/mtd/xip.h>
+ 
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
+#define FORCE_WORD_WRITE 1
+ 
+ #define MAX_WORD_RETRIES 3
+ 
+@@ -55,7 +55,9 @@
+ 
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+#if !FORCE_WORD_WRITE
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+#endif
+ static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
+ static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
+ static void cfi_amdstd_sync (struct mtd_info *);
+@@ -190,6 +192,7 @@ static void fixup_amd_bootblock(struct m
+ }
+ #endif
+ 
+#if !FORCE_WORD_WRITE
+ static void fixup_use_write_buffers(struct mtd_info *mtd, void *param)
+ {
+ 	struct map_info *map = mtd->priv;
+@@ -199,6 +202,7 @@ static void fixup_use_write_buffers(stru
+ 		mtd->write = cfi_amdstd_write_buffers;
+ 	}
+ }
+#endif /* !FORCE_WORD_WRITE */
+ 
+ /* Atmel chips don't use the same PRI format as AMD chips */
+ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
+@@ -1315,6 +1319,7 @@ static int cfi_amdstd_write_words(struct
+ /*
+  * FIXME: interleaved mode not tested, and probably not supported!
+  */
+#if !FORCE_WORD_WRITE
+ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+ 				    unsigned long adr, const u_char *buf,
+ 				    int len)
+@@ -1426,7 +1431,6 @@ static int __xipram do_write_buffer(stru
+ 	return ret;
+ }
+ 
+-
+ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+ 				    size_t *retlen, const u_char *buf)
+ {
+@@ -1505,6 +1509,7 @@ static int cfi_amdstd_write_buffers(stru
+ 
+ 	return 0;
+ }
+#endif /* !FORCE_WORD_WRITE */
+ 
+ /*
+  * Handle devices with one erase region, that only implement
--- a/target/linux/ar71xx/patches-2.6.33/120-dsa-trailer-tag-validation-fix.patch
+++ b/target/linux/ar71xx/patches-2.6.33/120-dsa-trailer-tag-validation-fix.patch
@ -0,0 +1,11 @@
+--- a/net/dsa/tag_trailer.c
+++ b/net/dsa/tag_trailer.c
+@@ -86,7 +86,7 @@ static int trailer_rcv(struct sk_buff *s
+ 
+ 	trailer = skb_tail_pointer(skb) - 4;
+ 	if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
+-	    (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
+	    (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
+ 		goto out_drop;
+ 
+ 	source_port = trailer[1] & 7;
--- a/target/linux/ar71xx/patches-2.6.33/121-dsa-add-88e6063-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/121-dsa-add-88e6063-driver.patch
@ -0,0 +1,26 @@
+--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
+@@ -36,6 +36,13 @@ config NET_DSA_MV88E6060
+ 	  This enables support for the Marvell 88E6060 ethernet switch
+ 	  chip.
+ 
+config NET_DSA_MV88E6063
+	bool "Marvell 88E6063 ethernet switch chip support"
+	select NET_DSA_TAG_TRAILER
+	---help---
+	  This enables support for the Marvell 88E6063 ethernet switch
+	  chip
+
+ config NET_DSA_MV88E6XXX_NEED_PPU
+ 	bool
+ 	default n
+--- a/net/dsa/Makefile
+++ b/net/dsa/Makefile
+@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag
+ # switch drivers
+ obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
+ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
+ obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o
+ obj-$(CONFIG_NET_DSA_MV88E6131) += mv88e6131.o
+ 
--- a/target/linux/ar71xx/patches-2.6.33/140-redboot_partition_scan.patch
+++ b/target/linux/ar71xx/patches-2.6.33/140-redboot_partition_scan.patch
@ -0,0 +1,54 @@
+--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
+@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru
+ 	static char nullstring[] = "unallocated";
+ #endif
+ 
+	buf = vmalloc(master->erasesize);
+	if (!buf)
+		return -ENOMEM;
+
+ restart:
+ 	if ( directory < 0 ) {
+ 		offset = master->size + directory * master->erasesize;
+-		while (master->block_isbad && 
+		while (master->block_isbad &&
+ 		       master->block_isbad(master, offset)) {
+ 			if (!offset) {
+ 			nogood:
+ 				printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
+				vfree(buf);
+ 				return -EIO;
+ 			}
+ 			offset -= master->erasesize;
+ 		}
+ 	} else {
+ 		offset = directory * master->erasesize;
+-		while (master->block_isbad && 
+		while (master->block_isbad &&
+ 		       master->block_isbad(master, offset)) {
+ 			offset += master->erasesize;
+ 			if (offset == master->size)
+ 				goto nogood;
+ 		}
+ 	}
+-	buf = vmalloc(master->erasesize);
+-
+-	if (!buf)
+-		return -ENOMEM;
+-
+ 	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+ 	       master->name, offset);
+ 
+@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru
+ 	}
+ 	if (i == numslots) {
+ 		/* Didn't find it */
+		if (offset + master->erasesize < master->size) {
+			/* not at the end of the flash yet, maybe next block :) */
+			directory++;
+			goto restart;
+		}
+ 		printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+ 		       master->name);
+ 		ret = 0;
--- a/target/linux/ar71xx/patches-2.6.33/200-rb4xx_nand_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/200-rb4xx_nand_driver.patch
@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
+@@ -482,4 +482,8 @@ config MTD_NAND_W90P910
+ 	  This enables the driver for the NAND Flash on evaluation board based
+ 	  on w90p910.
+ 
+config MTD_NAND_RB4XX
+	tristate "NAND flash driver for RouterBoard 4xx series"
+	depends on MTD_NAND && ATHEROS_AR71XX
+
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
+@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= 
+ obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
+ obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
+obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
+ obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
--- a/target/linux/ar71xx/patches-2.6.33/201-ap83_spi_controller.patch
+++ b/target/linux/ar71xx/patches-2.6.33/201-ap83_spi_controller.patch
@ -0,0 +1,27 @@
+--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
+@@ -11,6 +11,7 @@ endif
+ obj-$(CONFIG_SPI_MASTER)		+= spi.o
+ 
+ # SPI master controller drivers (bus)
+obj-$(CONFIG_SPI_AP83)			+= ap83_spi.o
+ obj-$(CONFIG_SPI_AR71XX)		+= ar71xx_spi.o
+ obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
+ obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
+--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
+@@ -53,6 +53,14 @@ if SPI_MASTER
+ 
+ comment "SPI Master Controller Drivers"
+ 
+config SPI_AP83
+	tristate "Atheros AP83 specific SPI Controller"
+	depends on SPI_MASTER && AR71XX_MACH_AP83
+	select SPI_BITBANG
+	help
+	  This is a specific SPI controller driver for the Atheros AP83
+	  reference board.
+
+ config SPI_AR71XX
+ 	tristate "Atheros AR71xx SPI Controller"
+ 	depends on SPI_MASTER && ATHEROS_AR71XX
--- a/target/linux/ar71xx/patches-2.6.33/202-spi_vsc7385_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/202-spi_vsc7385_driver.patch
@ -0,0 +1,24 @@
+--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
+@@ -296,6 +296,11 @@ config SPI_TLE62X0
+ 	  sysfs interface, with each line presented as a kind of GPIO
+ 	  exposing both switch control and diagnostic feedback.
+ 
+config SPI_VSC7385
+	tristate "Vitesse VSC7385 ethernet switch driver"
+	help
+	  SPI driver for the Vitesse VSC7385 ethernet switch.
+
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
+@@ -40,6 +40,7 @@ obj-$(CONFIG_SPI_STMP3XXX)		+= spi_stmp.
+ 
+ # SPI protocol drivers (device/link on bus)
+ obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o
+obj-$(CONFIG_SPI_VSC7385)	+= spi_vsc7385.o
+ obj-$(CONFIG_SPI_TLE62X0)	+= tle62x0.o
+ # 	... add above this line ...
+ 
--- a/target/linux/ar71xx/patches-2.6.33/203-pb44_spi_controller.patch
+++ b/target/linux/ar71xx/patches-2.6.33/203-pb44_spi_controller.patch
@ -0,0 +1,27 @@
+--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
+@@ -68,6 +68,14 @@ config SPI_AR71XX
+ 	help
+ 	  This is the SPI contoller driver for Atheros AR71xx.
+ 
+config SPI_PB44
+	tristate "Atheros PB44 board specific SPI controller"
+	depends on SPI_MASTER && AR71XX_MACH_PB44
+	select SPI_BITBANG
+	help
+	  This is a specific SPI controller driver for the Atheros PB44
+	  reference board.
+
+ config SPI_ATMEL
+ 	tristate "Atmel SPI Controller"
+ 	depends on (ARCH_AT91 || AVR32)
+--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
+@@ -22,6 +22,7 @@ obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
+ obj-$(CONFIG_SPI_GPIO_OLD)		+= spi_gpio_old.o
+ obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
+ obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
+obj-$(CONFIG_SPI_PB44)			+= pb44_spi.o
+ obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
+ obj-$(CONFIG_SPI_OMAP_UWIRE)		+= omap_uwire.o
+ obj-$(CONFIG_SPI_OMAP24XX)		+= omap2_mcspi.o
--- a/target/linux/ar71xx/patches-2.6.33/205-wndr3700-usb-led-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/205-wndr3700-usb-led-driver.patch
@ -0,0 +1,30 @@
+Index: linux-2.6.33/drivers/leds/Kconfig
+===================================================================
+--- linux-2.6.33.orig/drivers/leds/Kconfig	2010-02-28 16:43:15.000000000 +0100
+++ linux-2.6.33/drivers/leds/Kconfig	2010-02-28 16:47:43.134713224 +0100
+@@ -269,6 +269,13 @@
+ 	  To compile this driver as a module, choose M here: the module will
+ 	  be called leds-adp5520.
+ 
+config LEDS_WNDR3700_USB
+	tristate "NETGEAR WNDR3700 USB LED driver"
+	depends on LEDS_CLASS && AR71XX_MACH_WNDR3700
+	help
+	  This option enables support for the USB LED found on the
+	  NETGEAR WNDR3700 board.
+
+ comment "LED Triggers"
+ 
+ config LEDS_TRIGGERS
+Index: linux-2.6.33/drivers/leds/Makefile
+===================================================================
+--- linux-2.6.33.orig/drivers/leds/Makefile	2010-02-28 16:43:15.000000000 +0100
+++ linux-2.6.33/drivers/leds/Makefile	2010-02-28 16:48:22.946586221 +0100
+@@ -29,6 +29,7 @@
+ obj-$(CONFIG_LEDS_WM831X_STATUS)	+= leds-wm831x-status.o
+ obj-$(CONFIG_LEDS_WM8350)		+= leds-wm8350.o
+ obj-$(CONFIG_LEDS_PWM)			+= leds-pwm.o
+obj-${CONFIG_LEDS_WNDR3700_USB}		+= leds-wndr3700-usb.o
+ obj-$(CONFIG_LEDS_REGULATOR)		+= leds-regulator.o
+ obj-$(CONFIG_LEDS_INTEL_SS4200)		+= leds-ss4200.o
+ obj-$(CONFIG_LEDS_LT3593)		+= leds-lt3593.o
--- a/target/linux/ar71xx/patches-2.6.33/206-nxp-74hc153-gpio-chip-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/206-nxp-74hc153-gpio-chip-driver.patch
@ -0,0 +1,25 @@
+--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
+@@ -230,4 +230,12 @@ config GPIO_UCB1400
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called ucb1400_gpio.
+ 
+comment "Other GPIO expanders"
+
+config GPIO_NXP_74HC153
+	tristate "NXP 74HC153 Dual 4-input multiplexer"
+	help
+	  Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
+	  provides a GPIO interface supporting inputs.
+
+ endif
+--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
+@@ -10,6 +10,7 @@ obj-$(CONFIG_GPIO_MAX7301)	+= max7301.o
+ obj-$(CONFIG_GPIO_MAX732X)	+= max732x.o
+ obj-$(CONFIG_GPIO_MC33880)	+= mc33880.o
+ obj-$(CONFIG_GPIO_MCP23S08)	+= mcp23s08.o
+obj-$(CONFIG_GPIO_NXP_74HC153)	+= nxp_74hc153.o
+ obj-$(CONFIG_GPIO_PCA953X)	+= pca953x.o
+ obj-$(CONFIG_GPIO_PCF857X)	+= pcf857x.o
+ obj-$(CONFIG_GPIO_PL061)	+= pl061.o
--- a/target/linux/ar71xx/patches-2.6.33/300-mips_fw_myloader.patch
+++ b/target/linux/ar71xx/patches-2.6.33/300-mips_fw_myloader.patch
@ -0,0 +1,22 @@
+--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
+@@ -169,6 +169,7 @@ endif
+ #
+ libs-$(CONFIG_ARC)		+= arch/mips/fw/arc/
+ libs-$(CONFIG_CFE)		+= arch/mips/fw/cfe/
+libs-$(CONFIG_MYLOADER)		+= arch/mips/fw/myloader/
+ libs-$(CONFIG_SNIPROM)		+= arch/mips/fw/sni/
+ libs-y				+= arch/mips/fw/lib/
+ 
+--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
+@@ -880,6 +880,9 @@ config MIPS_NILE4
+ config MIPS_DISABLE_OBSOLETE_IDE
+ 	bool
+ 
+config MYLOADER
+	bool
+
+ config SYNC_R4K
+ 	bool
+ 
--- a/target/linux/ar71xx/patches-2.6.33/400-mips-multi-machine-update.patch
+++ b/target/linux/ar71xx/patches-2.6.33/400-mips-multi-machine-update.patch
@ -0,0 +1,134 @@
+--- a/arch/mips/kernel/mips_machine.c
+++ b/arch/mips/kernel/mips_machine.c
+@@ -7,12 +7,13 @@
+  *
+  */
+ #include <linux/mm.h>
+#include <linux/string.h>
+ 
+ #include <asm/mips_machine.h>
+-#include <asm/bootinfo.h>
+ 
+ static struct list_head mips_machines __initdata =
+ 		LIST_HEAD_INIT(mips_machines);
+static char *mips_machid __initdata;
+ 
+ char *mips_machine_name = "Unknown";
+ 
+@@ -55,20 +56,65 @@ void __init mips_machine_set_name(char *
+ 	}
+ }
+ 
+-void __init mips_machine_setup(unsigned long machtype)
+void __init mips_machine_setup(void)
+ {
+ 	struct mips_machine *mach;
+ 
+-	mach = mips_machine_find(machtype);
+	mach = mips_machine_find(mips_machtype);
+ 	if (!mach) {
+-		printk(KERN_ALERT "MIPS: no machine registered for "
+-			"machtype %lu\n", machtype);
+		printk(KERN_WARNING "MIPS: no machine registered for "
+			"machtype %lu\n", mips_machtype);
+ 		return;
+ 	}
+ 
+ 	mips_machine_set_name(mach->mach_name);
+-	printk(KERN_INFO "MIPS: machine is %s\n", mips_machine_name);
+	printk(KERN_NOTICE "MIPS: machine is %s\n", mips_machine_name);
+ 
+ 	if (mach->mach_setup)
+ 		mach->mach_setup();
+ }
+
+int __init mips_machtype_setup(char *id)
+{
+	if (mips_machid == NULL)
+		mips_machid = id;
+
+	return 1;
+}
+
+__setup("machtype=", mips_machtype_setup);
+
+static int __init mips_machtype_init(void)
+{
+	struct list_head *this;
+	struct mips_machine *mach;
+
+	if (mips_machid == NULL)
+		return 0;
+
+	list_for_each(this, &mips_machines) {
+		mach = list_entry(this, struct mips_machine, list);
+		if (mach->mach_id == NULL)
+			continue;
+
+		if (strcmp(mach->mach_id, mips_machid) == 0) {
+			mips_machtype = mach->mach_type;
+			return 0;
+		}
+	}
+
+	printk(KERN_WARNING
+	       "MIPS: no machine found for id: '%s', registered machines:\n",
+	       mips_machid);
+	printk(KERN_WARNING "%32s %s\n", "id", "name");
+
+	list_for_each(this, &mips_machines) {
+		mach = list_entry(this, struct mips_machine, list);
+		printk(KERN_WARNING "%32s %s\n",
+		       mach->mach_id ? mach->mach_id : "", mach->mach_name);
+	}
+
+	return 0;
+}
+
+core_initcall(mips_machtype_init);
+--- a/arch/mips/include/asm/mips_machine.h
+++ b/arch/mips/include/asm/mips_machine.h
+@@ -13,25 +13,33 @@
+ #include <linux/init.h>
+ #include <linux/list.h>
+ 
+#include <asm/bootinfo.h>
+
+ struct mips_machine {
+ 	unsigned long		mach_type;
+-	void			(*mach_setup)(void);
+	char			*mach_id;
+ 	char			*mach_name;
+	void			(*mach_setup)(void);
+ 	struct list_head	list;
+ };
+ 
+ void mips_machine_register(struct mips_machine *) __init;
+-void mips_machine_setup(unsigned long machtype) __init;
+void mips_machine_setup(void) __init;
+int  mips_machtype_setup(char *id) __init;
+ void mips_machine_set_name(char *name) __init;
+ 
+ extern char *mips_machine_name;
+ 
+-#define MIPS_MACHINE(_type, _name, _setup) 			\
+-static char machine_name_##_type[] __initdata = _name;		\
+#define MIPS_MACHINE(_type, _id, _name, _setup) 		\
+static const char machine_name_##_type[] __initconst		\
+			__aligned(1) = _name;			\
+static const char machine_id_##_type[] __initconst		\
+			__aligned(1) = _id;			\
+ static struct mips_machine machine_##_type __initdata =		\
+ {								\
+ 	.mach_type	= _type,				\
+-	.mach_name	= machine_name_##_type,			\
+	.mach_id	= (char *) machine_id_##_type,		\
+	.mach_name	= (char *) machine_name_##_type,	\
+ 	.mach_setup	= _setup,				\
+ };								\
+ 								\
+@@ -44,4 +52,3 @@ static int __init register_machine_##_ty
+ pure_initcall(register_machine_##_type)
+ 
+ #endif /* __ASM_MIPS_MACHINE_H */
+-
--- a/target/linux/ar71xx/patches-2.6.33/901-get_c0_compare_irq_function.patch
+++ b/target/linux/ar71xx/patches-2.6.33/901-get_c0_compare_irq_function.patch
@ -0,0 +1,33 @@
+Index: linux-2.6.33/arch/mips/kernel/traps.c
+===================================================================
+--- linux-2.6.33.orig/arch/mips/kernel/traps.c	2010-02-24 19:52:17.000000000 +0100
+++ linux-2.6.33/arch/mips/kernel/traps.c	2010-02-28 16:51:35.397204241 +0100
+@@ -50,6 +50,7 @@
+ #include <asm/types.h>
+ #include <asm/stacktrace.h>
+ #include <asm/irq.h>
+#include <asm/time.h>
+ 
+ extern void check_wait(void);
+ extern asmlinkage void r4k_wait(void);
+@@ -1496,6 +1497,8 @@
+ 	if (cpu_has_mips_r2) {
+ 		cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
+ 		cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
+		if (get_c0_compare_irq)
+			cp0_compare_irq = get_c0_compare_irq();
+ 		cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
+ 		if (cp0_perfcount_irq == cp0_compare_irq)
+ 			cp0_perfcount_irq = -1;
+Index: linux-2.6.33/arch/mips/include/asm/time.h
+===================================================================
+--- linux-2.6.33.orig/arch/mips/include/asm/time.h	2010-02-24 19:52:17.000000000 +0100
+++ linux-2.6.33/arch/mips/include/asm/time.h	2010-02-28 16:49:18.925959821 +0100
+@@ -52,6 +52,7 @@
+  */
+ #ifdef CONFIG_CEVT_R4K_LIB
+ extern unsigned int __weak get_c0_compare_int(void);
+extern unsigned int __weak get_c0_compare_irq(void);
+ extern int r4k_clockevent_init(void);
+ #endif
+ 
--- a/target/linux/ar71xx/patches-2.6.33/902-mips_clocksource_init_war.patch
+++ b/target/linux/ar71xx/patches-2.6.33/902-mips_clocksource_init_war.patch
@ -0,0 +1,56 @@
+--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
+@@ -16,6 +16,22 @@
+ #include <asm/cevt-r4k.h>
+ 
+ /*
+ * Compare interrupt can be routed and latched outside the core,
+ * so a single execution hazard barrier may not be enough to give
+ * it time to clear as seen in the Cause register.  4 time the
+ * pipeline depth seems reasonably conservative, and empirically
+ * works better in configurations with high CPU/bus clock ratios.
+ */
+
+#define compare_change_hazard() \
+	do { \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+	} while (0)
+
+/*
+  * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
+  * of these routines with SMTC-specific variants.
+  */
+@@ -31,6 +47,7 @@ static int mips_next_event(unsigned long
+ 	cnt = read_c0_count();
+ 	cnt += delta;
+ 	write_c0_compare(cnt);
+	compare_change_hazard();
+ 	res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
+ 	return res;
+ }
+@@ -100,22 +117,6 @@ static int c0_compare_int_pending(void)
+ 	return (read_c0_cause() >> cp0_compare_irq) & 0x100;
+ }
+ 
+-/*
+- * Compare interrupt can be routed and latched outside the core,
+- * so a single execution hazard barrier may not be enough to give
+- * it time to clear as seen in the Cause register.  4 time the
+- * pipeline depth seems reasonably conservative, and empirically
+- * works better in configurations with high CPU/bus clock ratios.
+- */
+-
+-#define compare_change_hazard() \
+-	do { \
+-		irq_disable_hazard(); \
+-		irq_disable_hazard(); \
+-		irq_disable_hazard(); \
+-		irq_disable_hazard(); \
+-	} while (0)
+-
+ int c0_compare_int_usable(void)
+ {
+ 	unsigned int delta;