1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-25 14:52:05 +02:00

Suppress promc.c.orig, fix the nand detection with newer boards (#2038)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8063 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
florian 2007-07-19 16:19:19 +00:00
parent 589df1ac74
commit 5ea7603e04
2 changed files with 10 additions and 164 deletions

View File

@ -1,161 +0,0 @@
/*
* prom.c
**********************************************************************
* P . Sadik Oct 10, 2003
*
* Started change log
* idt_cpu_freq is make a kernel configuration parameter
* idt_cpu_freq is exported so that other modules can use it.
* Code cleanup
**********************************************************************
* P. Sadik Oct 20, 2003
*
* Removed NVRAM code from here, since they are already available under
* nvram directory.
* Added serial port initialisation.
**********************************************************************
**********************************************************************
* P. Sadik Oct 30, 2003
*
* Added reset_cons_port
**********************************************************************
P.Christeas, 2005-2006
Port to 2.6, add 2.6 cmdline parsing
*/
#include <linux/autoconf.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/console.h>
#include <asm/bootinfo.h>
#include <linux/bootmem.h>
#include <linux/ioport.h>
#include <linux/blkdev.h>
#include <asm/rc32434/ddr.h>
#define PROM_ENTRY(x) (0xbfc00000+((x)*8))
extern void __init setup_serial_port(void);
unsigned int idt_cpu_freq = 132000000;
EXPORT_SYMBOL(idt_cpu_freq);
unsigned int board_type = 500;
EXPORT_SYMBOL(board_type);
unsigned int gpio_bootup_state = 0;
EXPORT_SYMBOL(gpio_bootup_state);
char mips_mac_address[18] = "08:00:06:05:40:01";
EXPORT_SYMBOL(mips_mac_address);
/* what to append to cmdline when button is [not] pressed */
#define GPIO_INIT_NOBUTTON ""
#define GPIO_INIT_BUTTON " 2"
#ifdef CONFIG_MIKROTIK_RB500
unsigned soft_reboot = 0;
EXPORT_SYMBOL(soft_reboot);
#endif
#define SR_NMI 0x00180000 /* NMI */
#define SERIAL_SPEED_ENTRY 0x00000001
#ifdef CONFIG_REMOTE_DEBUG
extern int remote_debug;
#endif
extern unsigned long mips_machgroup;
extern unsigned long mips_machtype;
#define FREQ_TAG "HZ="
#define GPIO_TAG "gpio="
#define KMAC_TAG "kmac="
#define MEM_TAG "mem="
#define BOARD_TAG "board="
#define IGNORE_CMDLINE_MEM 1
#define DEBUG_DDR
void parse_soft_settings(unsigned *ptr, unsigned size);
void parse_hard_settings(unsigned *ptr, unsigned size);
void __init prom_setup_cmdline(void);
void __init prom_init(void)
{
DDR_t ddr = (DDR_t) DDR_VirtualAddress; /* define the pointer to the DDR registers */
phys_t memsize = 0-ddr->ddrmask;
/* this should be the very first message, even before serial is properly initialized */
prom_setup_cmdline();
setup_serial_port();
mips_machgroup = MACH_GROUP_MIKROTIK;
soft_reboot = read_c0_status() & SR_NMI;
pm_power_off = NULL;
/*
* give all RAM to boot allocator,
* except for the first 0x400 and the last 0x200 bytes
*/
add_memory_region(ddr->ddrbase + 0x400, memsize - 0x600, BOOT_MEM_RAM);
}
void prom_free_prom_memory(void)
{
/* FIXME: STUB */
}
void __init prom_setup_cmdline(void){
char cmd_line[CL_SIZE];
char *cp;
int prom_argc;
char **prom_argv, **prom_envp;
int i;
prom_argc = fw_arg0;
prom_argv = (char **) fw_arg1;
prom_envp = (char **) fw_arg2;
cp=cmd_line;
/* Note: it is common that parameters start at argv[1] and not argv[0],
however, our elf loader starts at [0] */
for(i=0;i<prom_argc;i++){
if (strncmp(prom_argv[i], FREQ_TAG, sizeof(FREQ_TAG) - 1) == 0) {
idt_cpu_freq = simple_strtoul(prom_argv[i] + sizeof(FREQ_TAG) - 1, 0, 10);
continue;
}
#ifdef IGNORE_CMDLINE_MEM
/* parses out the "mem=xx" arg */
if (strncmp(prom_argv[i], MEM_TAG, sizeof(MEM_TAG) - 1) == 0) {
continue;
}
#endif
if (i>0) *(cp++) = ' ';
if (strncmp(prom_argv[i], BOARD_TAG, sizeof(BOARD_TAG) - 1) == 0) {
board_type = simple_strtoul(prom_argv[i] + sizeof(BOARD_TAG) - 1, 0, 10);
}
if (strncmp(prom_argv[i], GPIO_TAG, sizeof(GPIO_TAG) - 1) == 0) {
gpio_bootup_state = simple_strtoul(prom_argv[i] + sizeof(GPIO_TAG) - 1, 0, 10);
}
strcpy(cp,prom_argv[i]);
cp+=strlen(prom_argv[i]);
}
i=strlen(arcs_cmdline);
if (i>0){
*(cp++) = ' ';
strcpy(cp,arcs_cmdline);
cp+=strlen(arcs_cmdline);
}
if (gpio_bootup_state&0x02)
strcpy(cp,GPIO_INIT_NOBUTTON);
else
strcpy(cp,GPIO_INIT_BUTTON);
cmd_line[CL_SIZE-1] = '\0';
strcpy(arcs_cmdline,cmd_line);
}

View File

@ -33,6 +33,8 @@
#define MEM32(x) *((volatile unsigned *) (x))
extern unsigned int board_type;
struct rb500_nand_info {
struct nand_chip chip;
struct mtd_info mtd;
@ -123,9 +125,14 @@ static int rbmips_probe(struct platform_device *pdev)
return -EIO;
}
/* FIXME : this seems to work only for newer RB500, check the version to set the right flags accordingly */
data->flags1 = LO_FOFF | LO_CEX;
data->flags2 = LO_ULED | LO_ALE | LO_CLE | LO_WPX;
if (board_type > 500) {
data->flags1 = LO_FOFF | LO_CEX;
data->flags2 = LO_ULED | LO_ALE | LO_CLE | LO_WPX;
}
else {
data->flags1 = LO_WPX | LO_FOFF | LO_CEX;
data->flags2 = LO_ULED | LO_ALE | LO_CLE;
}
changeLatchU5(data->flags1, data->flags2);