ar71xx: add kernel support for the Allnet ALL0258N board

This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28564 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/ar71xx/base-files/lib/ar71xx.sh

@@ -10,6 +10,9 @@ ar71xx_board_name() {
 	machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo)
 
 	case "$machine" in
+	*ALL0258N)
+		name="all0258n"
+		;;
 	*AP121)
 		name="ap121"
 		;;

target/linux/ar71xx/config-2.6.39

@@ -13,6 +13,7 @@ CONFIG_AR71XX_DEV_M25P80=y
 CONFIG_AR71XX_DEV_PB42_PCI=y
 CONFIG_AR71XX_DEV_PB9X_PCI=y
 CONFIG_AR71XX_DEV_USB=y
+CONFIG_AR71XX_MACH_ALL0258N=y
 CONFIG_AR71XX_MACH_AP121=y
 CONFIG_AR71XX_MACH_AP81=y
 CONFIG_AR71XX_MACH_AP83=y

target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig

@@ -1,6 +1,13 @@
 if ATHEROS_AR71XX
 
 menu "Atheros AR71xx machine selection"
+config AR71XX_MACH_ALL0258N
+	bool "Allnet ALL0258N support"
+	select SOC_AR724X
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AP91_PCI if PCI
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
 
 config AR71XX_MACH_AP81
 	bool "Atheros AP81 board support"

target/linux/ar71xx/files/arch/mips/ar71xx/Makefile

@@ -28,6 +28,7 @@ obj-$(CONFIG_AR71XX_DEV_USB)		+= dev-usb.o
 obj-$(CONFIG_AR71XX_NVRAM)		+= nvram.o
 obj-$(CONFIG_AR71XX_PCI_ATH9K_FIXUP)	+= pci-ath9k-fixup.o
 
+obj-$(CONFIG_AR71XX_MACH_ALL0258N)	+= mach-all0258n.o
 obj-$(CONFIG_AR71XX_MACH_AP121)		+= mach-ap121.o
 obj-$(CONFIG_AR71XX_MACH_AP81)		+= mach-ap81.o
 obj-$(CONFIG_AR71XX_MACH_AP83)		+= mach-ap83.o

target/linux/ar71xx/files/arch/mips/ar71xx/mach-all0258n.c

@@ -0,0 +1,146 @@
+/*
+ *  Allnet ALL0258N support
+ *
+ *  Copyright (C) 2011 Daniel Golle <dgolle@allnet.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ap91-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+
+/* found via /sys/gpio/... try and error */
+#define ALL0258N_GPIO_BTN_RESET		1
+#define ALL0258N_GPIO_LED_RSSIHIGH	13
+#define ALL0258N_GPIO_LED_RSSIMEDIUM	15
+#define ALL0258N_GPIO_LED_RSSILOW	14
+
+/* defaults taken from others machs */
+#define ALL0258N_KEYS_POLL_INTERVAL	20	/* msecs */
+#define ALL0258N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0258N_KEYS_POLL_INTERVAL)
+
+/* showed up in the original firmware's bootlog */
+#define ALL0258N_LAN_PHYMASK BIT(4)
+#define ALL0258N_SEC_PHYMASK BIT(3)
+
+/*
+ * from U-Boot bootargs of original firmware:
+ * mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),320k(custom),1024k(kernel),4928k(rootfs),1536k(failsafe),64k(ART)
+ * we use a more OpenWrt-friendly layout now:
+ * mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),896k(kernel),5376k(rootfs),1536k(failsafe),64k(ART)
+ */
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition all0258n_partitions[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= 0x040000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "u-boot-env",
+		.offset		= 0x040000,
+		.size		= 0x010000,
+	}, {
+		.name		= "kernel",
+		.offset		= 0x050000,
+		.size		= 0x0E0000,
+	}, {
+		.name		= "rootfs",
+		.offset		= 0x130000,
+		.size		= 0x540000,
+	}, {
+		.name		= "failsafe",
+		.offset		= 0x670000,
+		.size		= 0x180000,
+	}, {
+		.name		= "firmware",
+		.offset		= 0x050000,
+		.size		= 0x630000,
+	}, {
+		.name		= "art",
+		.offset		= 0x7F0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data all0258n_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+	.parts		= all0258n_partitions,
+	.nr_parts	= ARRAY_SIZE(all0258n_partitions),
+#endif
+};
+
+static struct gpio_led all0258n_leds_gpio[] __initdata = {
+	{
+		.name		= "all0258n:green:rssihigh",
+		.gpio		= ALL0258N_GPIO_LED_RSSIHIGH,
+		.active_low	= 1,
+	}, {
+		.name		= "all0258n:yellow:rssimedium",
+		.gpio		= ALL0258N_GPIO_LED_RSSIMEDIUM,
+		.active_low	= 1,
+	}, {
+		.name		= "all0258n:red:rssilow",
+		.gpio		= ALL0258N_GPIO_LED_RSSILOW,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_keys_button all0258n_gpio_keys[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = ALL0258N_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= ALL0258N_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}
+};
+
+static void __init all0258n_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1f7f0000);
+	u8 *ee =  (u8 *) KSEG1ADDR(0x1f7f1000);
+
+	ar71xx_add_device_m25p80(&all0258n_flash_data);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(all0258n_leds_gpio),
+					all0258n_leds_gpio);
+
+	ar71xx_register_gpio_keys_polled(-1, ALL0258N_KEYS_POLL_INTERVAL,
+					 ARRAY_SIZE(all0258n_gpio_keys),
+					 all0258n_gpio_keys);
+
+	ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
+	ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 0);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth0_data.phy_mask = ALL0258N_LAN_PHYMASK;
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.phy_mask = ALL0258N_SEC_PHYMASK;
+	ar71xx_eth1_data.has_ar7240_switch = 1;
+
+	ar71xx_add_device_mdio(0x0);
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
+	ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(AR71XX_MACH_ALL0258N, "ALL0258N", "Allnet ALL0258N",
+	     all0258n_setup);

target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h

@@ -16,6 +16,7 @@
 
 enum ar71xx_mach_type {
 	AR71XX_MACH_GENERIC = 0,
+	AR71XX_MACH_ALL0258N,	/* Allnet ALL0258N */
 	AR71XX_MACH_AP121,	/* Atheros AP121 */
 	AR71XX_MACH_AP121_MINI,	/* Atheros AP121-MINI */
 	AR71XX_MACH_AP81,	/* Atheros AP81 */