qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-24 03:01:55 +02:00
Code

[ramips] add Ralink V11ST-FE board support

Browse Source 
This board is equipped with:
- 4MB of NOR Flash
- 32MB of SDRAM
- IC+ IP175C switch
- one Mini-PCI slot

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30561 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
florian 2012-02-15 21:13:11 +00:00
parent f9e32614b0
commit 62c0190fa5
11 changed files with 134 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/ramips/base-files/etc/diag.sh
View File

@ -69,6 +69,9 @@ get_status_led() {
rt-n56u)
status_led="asus:blue:power"
;;
v11st-fe)
status_led="v11st-fe:green:status"
;;
v22rw-2x2)
status_led="v22rw-2x2:green:security"
;;

1
target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
View File

@ -58,6 +58,7 @@ case "$FIRMWARE" in
nw718 | \
omni-emb | \
rt-n15 | \
v11st-fe | \
v22rw-2x2 | \
w502u | \
wcr-150gn | \

3
target/linux/ramips/base-files/etc/uci-defaults/leds
View File

@ -60,6 +60,9 @@ case $board in
nw718)
set_usb_led "nw718:amber:usb"
;;
v11st-fe)
set_wifi_led "rt2800pci-phy0::radio"
;;
w502u)
set_usb_led "alfa:blue:usb"
set_wifi_led "rt2800pci-phy0::radio"

7
target/linux/ramips/base-files/etc/uci-defaults/network
View File

@ -50,6 +50,13 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "switch0" "2" "4 8t"
;;
v11st-fe)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
ucidef_add_switch_vlan "switch0" "2" "0 5t"
;;
wcr-150gn)
ucidef_set_interface_lan_wan "eth0.2" "eth0.1"
;;

3
target/linux/ramips/base-files/lib/ramips.sh
View File

@ -122,6 +122,9 @@ ramips_board_name() {
*"Sitecom WL-351 v1 002")
name="wl-351"
;;
*"Ralink V11ST-FE")
name="v11st-fe"
;;
*"WLI-TX4-AG300N")
name="wli-tx4-ag300n"
;;

1
target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
View File

@ -16,6 +16,7 @@ enum ramips_mach_type {
/* RT2880 based machines */
RAMIPS_MACH_F5D8235_V1, /* Belkin F5D8235 v1 */
RAMIPS_MACH_RT_N15, /* Asus RT-N15 */
RAMIPS_MACH_V11ST_FE, /* Ralink V11ST-FE */
RAMIPS_MACH_WLI_TX4_AG300N, /* Buffalo WLI-TX4-AG300N */
RAMIPS_MACH_WZR_AGL300NH, /* Buffalo WZR-AGL300NH */

5
target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig
View File

@ -11,6 +11,11 @@ config RT288X_MACH_RT_N15
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
config RT288X_MACH_V11ST_FE
bool "Ralink V11ST-FE board support"
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
config RT288X_MACH_WLI_TX4_AG300N
bool "Buffalo WLI-TX4-AG300N board support"
select RALINK_DEV_GPIO_BUTTONS

1
target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile
View File

@ -15,5 +15,6 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_RT288X_MACH_F5D8235_V1) += mach-f5d8235-v1.o
obj-$(CONFIG_RT288X_MACH_RT_N15) += mach-rt-n15.o
obj-$(CONFIG_RT288X_MACH_V11ST_FE) += mach-v11st-fe.o
obj-$(CONFIG_RT288X_MACH_WLI_TX4_AG300N) += mach-wli-tx4-ag300n.o
obj-$(CONFIG_RT288X_MACH_WZR_AGL300NH) += mach-wzr-agl300nh.o

106
target/linux/ramips/files/arch/mips/ralink/rt288x/mach-v11st-fe.c Normal file
View File

@ -0,0 +1,106 @@
/*
* Ralink V11ST-FE board support
*
* Copyright (C) 2012 Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/ethtool.h>
#include <asm/mach-ralink/machine.h>
#include <asm/mach-ralink/dev-gpio-buttons.h>
#include <asm/mach-ralink/dev-gpio-leds.h>
#include <asm/mach-ralink/rt288x.h>
#include <asm/mach-ralink/rt288x_regs.h>
#include <asm/mach-ralink/ramips_eth_platform.h>
#include "devices.h"
#define V11ST_FE_GPIO_STATUS_LED 12
#define V11ST_FE_GPIO_BUTTON_WPS 0
#define V11ST_FE_KEYS_POLL_INTERVAL 20
#define V11ST_FE_KEYS_DEBOUNCE_INTERVAL (3 * V11ST_FE_KEYS_POLL_INTERVAL)
static struct gpio_led v11st_fe_leds_gpio[] __initdata = {
{
.name = "v11st-fe:green:status",
.gpio = V11ST_FE_GPIO_STATUS_LED,
.active_low = 1,
}
};
static struct gpio_keys_button v11st_fe_gpio_buttons[] __initdata = {
{
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = V11ST_FE_KEYS_DEBOUNCE_INTERVAL,
.gpio = V11ST_FE_GPIO_BUTTON_WPS,
}
};
static struct mtd_partition v11st_fe_partitions[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x030000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "u-boot-env",
.offset = 0x030000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "factory",
.offset = 0x040000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "kernel",
.offset = 0x050000,
.size = 0x140000,
}, {
.name = "rootfs",
.offset = 0x190000,
.size = 0x210000,
}
};
static void __init rt_v11st_fe_init(void)
{
rt288x_gpio_init(RT2880_GPIO_MODE_UART0);
rt288x_flash0_data.nr_parts = ARRAY_SIZE(v11st_fe_partitions);
rt288x_flash0_data.parts = v11st_fe_partitions;
rt288x_register_flash(0);
ramips_register_gpio_leds(-1, ARRAY_SIZE(v11st_fe_leds_gpio),
v11st_fe_leds_gpio);
ramips_register_gpio_buttons(-1, V11ST_FE_KEYS_POLL_INTERVAL,
ARRAY_SIZE(v11st_fe_gpio_buttons),
v11st_fe_gpio_buttons);
rt288x_register_wifi();
/* Board is connected to an IC+ IP175C Fast Ethernet switch */
rt288x_eth_data.speed = SPEED_100;
rt288x_eth_data.duplex = DUPLEX_FULL;
rt288x_eth_data.tx_fc = 1;
rt288x_eth_data.rx_fc = 1;
rt288x_eth_data.phy_mask = BIT(0);
rt288x_register_ethernet();
rt288x_register_wdt();
}
MIPS_MACHINE(RAMIPS_MACH_V11ST_FE, "V11ST-FE", "Ralink V11ST-FE", rt_v11st_fe_init);

2
target/linux/ramips/rt288x/config-2.6.39
View File

@ -63,6 +63,7 @@ CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=m
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IP17XX_PHY=y
CONFIG_IRQ_CPU=y
# CONFIG_LEDS_GPIO is not set
CONFIG_MACH_NO_WESTBRIDGE=y
@ -96,6 +97,7 @@ CONFIG_RALINK_RT288X=y
CONFIG_RAMIPS_WDT=y
CONFIG_RT288X_MACH_F5D8235_V1=y
CONFIG_RT288X_MACH_RT_N15=y
CONFIG_RT288X_MACH_V11ST_FE=y
CONFIG_RT288X_MACH_WLI_TX4_AG300N=y
CONFIG_RT288X_MACH_WZR_AGL300NH=y
CONFIG_RTL8366S_PHY=y

2
target/linux/ramips/rt288x/config-3.2
View File

@ -61,6 +61,7 @@ CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=m
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IP17XX_PHY=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_FORCED_THREADING=y
# CONFIG_LANTIQ is not set
@ -96,6 +97,7 @@ CONFIG_RALINK_RT288X=y
CONFIG_RAMIPS_WDT=y
CONFIG_RT288X_MACH_F5D8235_V1=y
CONFIG_RT288X_MACH_RT_N15=y
CONFIG_RT288X_MACH_V11ST_FE=y
CONFIG_RT288X_MACH_WLI_TX4_AG300N=y
CONFIG_RT288X_MACH_WZR_AGL300NH=y
CONFIG_RTL8366S_PHY=y