mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-24 19:37:43 +02:00
[ar71xx] add some missing wndr3800 base-files definitions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29433 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
parent
1f7d4ca407
commit
62f688b6ec
@ -0,0 +1,69 @@
|
||||
config interface loopback
|
||||
option ifname lo
|
||||
option proto static
|
||||
option ipaddr 127.0.0.1
|
||||
option netmask 255.0.0.0
|
||||
|
||||
config interface lan
|
||||
option ifname eth0.1
|
||||
option type bridge
|
||||
option proto static
|
||||
option ipaddr 192.168.1.1
|
||||
option netmask 255.255.255.0
|
||||
|
||||
config interface wan
|
||||
option ifname eth1
|
||||
option proto dhcp
|
||||
|
||||
config switch
|
||||
option name rtl8366s
|
||||
option reset 1
|
||||
option enable_vlan 1
|
||||
# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
|
||||
option blinkrate 2
|
||||
|
||||
config switch_vlan
|
||||
option device rtl8366s
|
||||
option vlan 1
|
||||
option ports "0 1 2 3 5t"
|
||||
|
||||
config switch_port
|
||||
# Port 1 controls the GREEN configuration of LEDs for
|
||||
# the switch and the section does not correspond to a real
|
||||
# switch port.
|
||||
#
|
||||
# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
|
||||
# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
|
||||
# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
|
||||
# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
|
||||
# 14: Link (master); 15: separate register
|
||||
|
||||
option device rtl8366s
|
||||
option port 1
|
||||
option led 6
|
||||
|
||||
config switch_port
|
||||
# Port 2 controls the ORANGE configuration of LEDs for
|
||||
# the switch and the section does not correspond to a real
|
||||
# switch port.
|
||||
#
|
||||
# See the key above for switch port 1 for the meaning of the
|
||||
# 'led' setting below.
|
||||
|
||||
option device rtl8366s
|
||||
option port 2
|
||||
option led 9
|
||||
|
||||
config switch_port
|
||||
# Port 5 controls the configuration of the WAN LED and the
|
||||
# section does not correspond to a real switch port.
|
||||
#
|
||||
# To toggle the use of green or orange LEDs for the WAN port,
|
||||
# see the LED setting for wndr3700:green:wan in /etc/config/system.
|
||||
#
|
||||
# See the key above for switch port 1 for the meaning of the
|
||||
# 'led' setting below.
|
||||
|
||||
option device rtl8366s
|
||||
option port 5
|
||||
option led 2
|
@ -111,7 +111,7 @@ get_status_led() {
|
||||
wzr-hp-g300nh)
|
||||
status_led="buffalo:green:router"
|
||||
;;
|
||||
wndr3700 | wndr3700v2)
|
||||
wndr3700 | wndr3700v2 | wndr3800)
|
||||
status_led="wndr3700:green:power"
|
||||
;;
|
||||
wnr2000)
|
||||
|
@ -124,7 +124,8 @@ wrt160nl)
|
||||
;;
|
||||
|
||||
wndr3700 | \
|
||||
wndr3700v2)
|
||||
wndr3700v2 | \
|
||||
wndr3800)
|
||||
set_led_default "wan" "WAN LED (green)" "wndr3700:green:wan" "0"
|
||||
set_led_usbdev "usb" "USB" "wndr3700:green:usb" "1-1"
|
||||
;;
|
||||
|
Loading…
Reference in New Issue
Block a user