qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-16 17:13:10 +02:00
Code

[docs] update switch documentation

Browse Source 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33733 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
luka 2012-10-12 12:13:56 +00:00
parent f4c5e720c8
commit 6338f6f44f
1 changed files with 22 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
docs/network.tex
View File

@ -107,7 +107,7 @@ The name for the route section is optional, the \texttt{interface}, \texttt{targ
\texttt{gateway} options are mandatory. \texttt{gateway} options are mandatory.
Leaving out the \texttt{netmask} option will turn the route into a host route. Leaving out the \texttt{netmask} option will turn the route into a host route.
\subsubsection{Setting up the switch (currently broadcom only)} \subsubsection{Setting up the switch (broadcom only)}
The switch configuration is set by adding a \texttt{'switch'} config section. The switch configuration is set by adding a \texttt{'switch'} config section.
Example: Example:
@ -152,6 +152,27 @@ Three interfaces will be automatically created using this switch layout :
You can then assign those interfaces to a custom network configuration name You can then assign those interfaces to a custom network configuration name
like \texttt{lan}, \texttt{wan} or \texttt{dmz} for instance. like \texttt{lan}, \texttt{wan} or \texttt{dmz} for instance.
\subsubsection{Setting up the switch (swconfig)}
\emph{swconfig} based configurations have a different structure with one extra
section per vlan. The example below shows a typical configuration:
\begin{Verbatim}
config 'switch' 'eth0'
option 'reset' '1'
option 'enable_vlan' '1'
config 'switch_vlan' 'eth0_1'
option 'device' 'eth0'
option 'vlan' '1'
option 'ports' '0 1 2 3 5t'
config 'switch_vlan' 'eth0_2'
option 'device' 'eth0'
option 'vlan' '2'
option 'ports' '4 5t'
\end{Verbatim}
\subsubsection{Setting up IPv6 connectivity} \subsubsection{Setting up IPv6 connectivity}
OpenWrt supports IPv6 connectivity using PPP, Tunnel brokers or static OpenWrt supports IPv6 connectivity using PPP, Tunnel brokers or static