ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29612 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/ramips/base-files/etc/diag.sh

@@ -66,6 +66,9 @@ get_status_led() {
 	whr-g300n)
 		status_led="whr-g300n:green:router"
 		;;
+	wli-tx4-ag300n)
+		status_led="buffalo:blue:power"
+		;;
 	wl-351)
 		status_led="wl-351:amber:power"
 		;;

target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom

@@ -60,6 +60,7 @@ case "$FIRMWARE" in
 	wcr-150gn | \
 	whr-g300n | \
 	wl-351 | \
+	wli-tx4-ag300n | \
 	wr512-3gn)
 		rt2x00_eeprom_extract "factory" 0 272
 		;;

target/linux/ramips/base-files/etc/uci-defaults/network

@@ -30,6 +30,10 @@ ramips_setup_interfaces()
 		ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
 		;;
 
+	wli-tx4-ag300n)
+		ucidef_set_interface_lan "eth0"
+		;;
+
 	rt-n15)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 		ucidef_add_switch "rtl8366s" "1" "1"
@@ -81,6 +85,11 @@ ramips_setup_macs()
                 lan_mac=$(ramips_get_mac_binary factory 4)
                 wan_mac=$(ramips_get_mac_binary factory 40)
 		;;
+
+	wli-tx4-ag300n)
+		lan_mac=$(ramips_get_mac_binary factory 4)
+		;;
+
 	esac
 
 	[ -n $lan_mac ] && ucidef_set_interface_macaddr lan $lan_mac

target/linux/ramips/base-files/lib/ramips.sh

@@ -107,6 +107,9 @@ ramips_board_name() {
 	*"Sitecom WL-351 v1 002")
 		name="wl-351"
 		;;
+	*"WLI-TX4-AG300N")
+		name="wli-tx4-ag300n"
+		;;
 	*"WZR-AGL300NH")
 		name="wzr-agl300nh"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -27,6 +27,7 @@ platform_check_image() {
 	rt-g32-b1 | \
 	rt-n15 | \
 	v22rw-2x2 | \
+	wli-tx4-ag300n | \
 	whr-g300n)
 		[ "$magic" != "2705" ] && {
 			echo "Invalid image type."