mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-30 17:40:16 +02:00
preliminary board support for the Linksys WRT300N v2 (incomplete)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7167 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
kaloz
parent
3192ed8d6e
commit
69c639257e
@ -22,7 +22,7 @@
|
||||
# NOTE: for now it's for only IXP4xx in big endian mode
|
||||
|
||||
# list of supported boards, in "boardname machtypeid" format
|
||||
for board in "avila 526" "gateway7001 731" "nslu2 597" "nas100d 865" "wg302v2 890" "pronghornmetro 1040" "compex 1273"
|
||||
for board in "avila 526" "gateway7001 731" "nslu2 597" "nas100d 865" "wg302v2 890" "pronghornmetro 1040" "compex 1273" "wrt300nv2 1077"
|
||||
do
|
||||
set -- $board
|
||||
hexid=$(printf %x\\n $2)
|
||||
|
||||
@ -220,6 +220,7 @@ CONFIG_MACH_NAS100D=y
|
||||
CONFIG_MACH_NSLU2=y
|
||||
CONFIG_MACH_PRONGHORNMETRO=y
|
||||
CONFIG_MACH_WG302V2=y
|
||||
CONFIG_MACH_WRT300NV2=y
|
||||
# CONFIG_MAC_PARTITION is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
CONFIG_MINI_FO=y
|
||||
@ -231,7 +232,7 @@ CONFIG_MTD_BLOCK=y
|
||||
# CONFIG_MTD_BLOCK2MTD is not set
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_ADV_OPTIONS=y
|
||||
# CONFIG_MTD_CFI_AMDSTD is not set
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
|
||||
CONFIG_MTD_CFI_GEOMETRY=n
|
||||
CONFIG_MTD_CFI_I1=y
|
||||
|
||||
229
target/linux/ixp4xx-2.6/patches/600-wrt300nv2.patch
Normal file
229
target/linux/ixp4xx-2.6/patches/600-wrt300nv2.patch
Normal file
@ -0,0 +1,229 @@
|
||||
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig
|
||||
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig 2007-05-03 23:17:47.000000000 +0200
|
||||
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-04-24 14:25:02.000000000 +0200
|
||||
@@ -65,6 +65,14 @@
|
||||
WP18 or NP18A boards. For more information on this
|
||||
platform, see http://openwrt.org
|
||||
|
||||
+config MACH_WRT300NV2
|
||||
+ bool "Linksys WRT300N v2"
|
||||
+ select PCI
|
||||
+ help
|
||||
+ Say 'Y' here if you want your kernel to support Linksys'
|
||||
+ WRT300N v2 router. For more information on this
|
||||
+ platform, see http://openwrt.org
|
||||
+
|
||||
config ARCH_IXDP425
|
||||
bool "IXDP425"
|
||||
help
|
||||
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile
|
||||
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile 2007-05-03 23:17:47.000000000 +0200
|
||||
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile 2007-04-24 14:25:02.000000000 +0200
|
||||
@@ -15,6 +15,7 @@
|
||||
obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
|
||||
obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
|
||||
obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
|
||||
+obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
|
||||
|
||||
obj-y += common.o
|
||||
|
||||
@@ -28,5 +29,6 @@
|
||||
obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
|
||||
obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
|
||||
obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
|
||||
+obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
|
||||
|
||||
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
|
||||
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
|
||||
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-pci.c 1970-01-01 01:00:00.000000000 +0100
|
||||
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-pci.c 2007-05-10 10:40:54.000000000 +0200
|
||||
@@ -0,0 +1,65 @@
|
||||
+/*
|
||||
+ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
|
||||
+ *
|
||||
+ * PCI setup routines for Linksys WRT300N v2
|
||||
+ *
|
||||
+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
|
||||
+ *
|
||||
+ * based on coyote-pci.c:
|
||||
+ * Copyright (C) 2002 Jungo Software Technologies.
|
||||
+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
|
||||
+ *
|
||||
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 as
|
||||
+ * published by the Free Software Foundation.
|
||||
+ *
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/pci.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/irq.h>
|
||||
+
|
||||
+#include <asm/mach-types.h>
|
||||
+#include <asm/hardware.h>
|
||||
+#include <asm/irq.h>
|
||||
+
|
||||
+#include <asm/mach/pci.h>
|
||||
+
|
||||
+extern void ixp4xx_pci_preinit(void);
|
||||
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
|
||||
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
|
||||
+
|
||||
+void __init wrt300nv2_pci_preinit(void)
|
||||
+{
|
||||
+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
|
||||
+
|
||||
+ ixp4xx_pci_preinit();
|
||||
+}
|
||||
+
|
||||
+static int __init wrt300nv2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
||||
+{
|
||||
+ if (slot == 1)
|
||||
+ return IRQ_IXP4XX_GPIO8;
|
||||
+ else return -1;
|
||||
+}
|
||||
+
|
||||
+struct hw_pci wrt300nv2_pci __initdata = {
|
||||
+ .nr_controllers = 1,
|
||||
+ .preinit = wrt300nv2_pci_preinit,
|
||||
+ .swizzle = pci_std_swizzle,
|
||||
+ .setup = ixp4xx_setup,
|
||||
+ .scan = ixp4xx_scan_bus,
|
||||
+ .map_irq = wrt300nv2_map_irq,
|
||||
+};
|
||||
+
|
||||
+int __init wrt300nv2_pci_init(void)
|
||||
+{
|
||||
+ if (machine_is_wrt300nv2())
|
||||
+ pci_common_init(&wrt300nv2_pci);
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+subsys_initcall(wrt300nv2_pci_init);
|
||||
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
|
||||
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 1970-01-01 01:00:00.000000000 +0100
|
||||
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 2007-05-03 23:16:53.000000000 +0200
|
||||
@@ -0,0 +1,108 @@
|
||||
+/*
|
||||
+ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
|
||||
+ *
|
||||
+ * Board setup for the Linksys WRT300N v2
|
||||
+ *
|
||||
+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
|
||||
+ *
|
||||
+ * based on coyote-setup.c:
|
||||
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
|
||||
+ *
|
||||
+ * Author: Imre Kaloz <Kaloz@openwrt.org>
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/device.h>
|
||||
+#include <linux/serial.h>
|
||||
+#include <linux/tty.h>
|
||||
+#include <linux/serial_8250.h>
|
||||
+#include <linux/slab.h>
|
||||
+
|
||||
+#include <asm/types.h>
|
||||
+#include <asm/setup.h>
|
||||
+#include <asm/memory.h>
|
||||
+#include <asm/hardware.h>
|
||||
+#include <asm/irq.h>
|
||||
+#include <asm/mach-types.h>
|
||||
+#include <asm/mach/arch.h>
|
||||
+#include <asm/mach/flash.h>
|
||||
+
|
||||
+static struct flash_platform_data wrt300nv2_flash_data = {
|
||||
+ .map_name = "cfi_probe",
|
||||
+ .width = 2,
|
||||
+};
|
||||
+
|
||||
+static struct resource wrt300nv2_flash_resource = {
|
||||
+ .flags = IORESOURCE_MEM,
|
||||
+};
|
||||
+
|
||||
+static struct platform_device wrt300nv2_flash = {
|
||||
+ .name = "IXP4XX-Flash",
|
||||
+ .id = 0,
|
||||
+ .dev = {
|
||||
+ .platform_data = &wrt300nv2_flash_data,
|
||||
+ },
|
||||
+ .num_resources = 1,
|
||||
+ .resource = &wrt300nv2_flash_resource,
|
||||
+};
|
||||
+
|
||||
+static struct resource wrt300nv2_uart_resource = {
|
||||
+ .start = IXP4XX_UART2_BASE_PHYS,
|
||||
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
|
||||
+ .flags = IORESOURCE_MEM,
|
||||
+};
|
||||
+
|
||||
+static struct plat_serial8250_port wrt300nv2_uart_data[] = {
|
||||
+ {
|
||||
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
|
||||
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
|
||||
+ .irq = IRQ_IXP4XX_UART2,
|
||||
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
||||
+ .iotype = UPIO_MEM,
|
||||
+ .regshift = 2,
|
||||
+ .uartclk = IXP4XX_UART_XTAL,
|
||||
+ },
|
||||
+ { },
|
||||
+};
|
||||
+
|
||||
+static struct platform_device wrt300nv2_uart = {
|
||||
+ .name = "serial8250",
|
||||
+ .id = PLAT8250_DEV_PLATFORM,
|
||||
+ .dev = {
|
||||
+ .platform_data = wrt300nv2_uart_data,
|
||||
+ },
|
||||
+ .num_resources = 1,
|
||||
+ .resource = &wrt300nv2_uart_resource,
|
||||
+};
|
||||
+
|
||||
+static struct platform_device *wrt300nv2_devices[] __initdata = {
|
||||
+ &wrt300nv2_flash,
|
||||
+ &wrt300nv2_uart
|
||||
+};
|
||||
+
|
||||
+static void __init wrt300nv2_init(void)
|
||||
+{
|
||||
+ ixp4xx_sys_init();
|
||||
+
|
||||
+ wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
|
||||
+ wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
|
||||
+
|
||||
+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
|
||||
+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
|
||||
+
|
||||
+ platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
|
||||
+}
|
||||
+
|
||||
+#ifdef CONFIG_MACH_WRT300NV2
|
||||
+MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
|
||||
+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
|
||||
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
|
||||
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
|
||||
+ .map_io = ixp4xx_map_io,
|
||||
+ .init_irq = ixp4xx_init_irq,
|
||||
+ .timer = &ixp4xx_timer,
|
||||
+ .boot_params = 0x0100,
|
||||
+ .init_machine = wrt300nv2_init,
|
||||
+MACHINE_END
|
||||
+#endif
|
||||
diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
|
||||
--- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h 2007-05-03 23:17:48.000000000 +0200
|
||||
+++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2007-04-24 14:25:02.000000000 +0200
|
||||
@@ -40,7 +40,7 @@
|
||||
/*
|
||||
* Some boards are using UART2 as console
|
||||
*/
|
||||
- if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || machine_is_pronghorn() || machine_is_pronghorn_metro())
|
||||
+ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || machine_is_pronghorn() || machine_is_pronghorn_metro() || machine_is_wrt300nv2())
|
||||
uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
|
||||
else
|
||||
uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
|
||||
@ -0,0 +1,62 @@
|
||||
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
|
||||
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 2007-04-24 14:25:02.000000000 +0200
|
||||
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 2007-04-24 14:31:09.000000000 +0200
|
||||
@@ -76,9 +76,57 @@
|
||||
.resource = &wrt300nv2_uart_resource,
|
||||
};
|
||||
|
||||
+static struct resource res_mac0 = {
|
||||
+ .start = IXP4XX_EthB_BASE_PHYS,
|
||||
+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
|
||||
+ .flags = IORESOURCE_MEM,
|
||||
+};
|
||||
+
|
||||
+static struct resource res_mac1 = {
|
||||
+ .start = IXP4XX_EthC_BASE_PHYS,
|
||||
+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
|
||||
+ .flags = IORESOURCE_MEM,
|
||||
+};
|
||||
+
|
||||
+static struct mac_plat_info plat_mac0 = {
|
||||
+ .npe_id = 1,
|
||||
+ .phy_id = -1,
|
||||
+ .eth_id = 0,
|
||||
+ .rxq_id = 27,
|
||||
+ .txq_id = 24,
|
||||
+ .rxdoneq_id = 4,
|
||||
+};
|
||||
+
|
||||
+static struct mac_plat_info plat_mac1 = {
|
||||
+ .npe_id = 2,
|
||||
+ .phy_id = 1,
|
||||
+ .eth_id = 1,
|
||||
+ .rxq_id = 28,
|
||||
+ .txq_id = 25,
|
||||
+ .rxdoneq_id = 5,
|
||||
+};
|
||||
+
|
||||
+static struct platform_device mac0 = {
|
||||
+ .name = "ixp4xx_mac",
|
||||
+ .id = 0,
|
||||
+ .dev.platform_data = &plat_mac0,
|
||||
+ .num_resources = 1,
|
||||
+ .resource = &res_mac0,
|
||||
+};
|
||||
+
|
||||
+static struct platform_device mac1 = {
|
||||
+ .name = "ixp4xx_mac",
|
||||
+ .id = 1,
|
||||
+ .dev.platform_data = &plat_mac1,
|
||||
+ .num_resources = 1,
|
||||
+ .resource = &res_mac1,
|
||||
+};
|
||||
+
|
||||
static struct platform_device *wrt300nv2_devices[] __initdata = {
|
||||
&wrt300nv2_flash,
|
||||
- &wrt300nv2_uart
|
||||
+ &wrt300nv2_uart,
|
||||
+ &mac0,
|
||||
+ &mac1,
|
||||
};
|
||||
|
||||
static void __init wrt300nv2_init(void)
|
||||
Loading…
Reference in New Issue
Block a user