From 6d7fed16078bf2f727aa91621269af4002a7a510 Mon Sep 17 00:00:00 2001 From: thepeople Date: Thu, 22 Jan 2009 22:00:07 +0000 Subject: [PATCH] Allow changing country code for madwifi driver. Thanks alisonken1 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14148 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- package/madwifi/files/lib/wifi/madwifi.sh | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/package/madwifi/files/lib/wifi/madwifi.sh b/package/madwifi/files/lib/wifi/madwifi.sh index d53bc064c..550bba7e5 100755 --- a/package/madwifi/files/lib/wifi/madwifi.sh +++ b/package/madwifi/files/lib/wifi/madwifi.sh @@ -67,6 +67,15 @@ disable_atheros() ( enable_atheros() { local device="$1" + # Can only set the country code to one setting for the entire system. The last country code is the one that will be applied. + config_get country "$device" country + [ -z "$country" ] && country="0" + local cc="0" + [ -e /proc/sys/dev/$device/countrycode ] && cc="$(cat /proc/sys/dev/$device/countrycode)" + if [ ! "$cc" = "$country" ] ; then + rmmod ath_pci + insmod ath_pci countrycode=$country + fi config_get channel "$device" channel config_get vifs "$device" vifs @@ -278,10 +287,6 @@ enable_atheros() { ifconfig "$ifname" up - # TXPower settings only work if device is up already - config_get txpwr "$vif" txpower - [ -n "$txpwr" ] && iwconfig "$ifname" txpower "${txpwr%%.*}" - local net_cfg bridge net_cfg="$(find_net_config "$vif")" [ -z "$net_cfg" ] || { @@ -292,6 +297,11 @@ enable_atheros() { [ -n "$ssid" ] && iwconfig "$ifname" essid on iwconfig "$ifname" essid "$ssid" set_wifi_up "$vif" "$ifname" + + # TXPower settings only work if device is up already + config_get txpwr "$vif" txpower + [ -n "$txpwr" ] && iwconfig "$ifname" txpower "${txpwr%%.*}" + case "$mode" in ap) config_get_bool isolate "$vif" isolate 0