ramips: add board alias for the ALL0239-3G

Generate image for the ALL0239-3G which can be flashed through the
chipset-vendor SDK based firmware's web-interface and bootloader.

The bootloader seems to ignore uImage checksum errors, but does complain about
them once the 0xDEADC0DE was replaced by an actual JFFS2 page.

I'm working on implementing fixtrx for uImage in the mtd package to solve this.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33206 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/ramips/base-files/etc/diag.sh

@@ -51,6 +51,7 @@ get_status_led() {
 	fonera20n)
 		status_led="fonera20n:green:power"
 		;;
+	all0239-3g|\
 	hw550-3g)
 		status_led="hw550-3g:green:status"
 		;;

target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom

@@ -53,6 +53,7 @@ case "$FIRMWARE" in
 		;;
 
 	3g-6200n | \
+	all0239-3g | \
 	all0256n | \
 	all5002 | \
 	argus-atp52b | \

target/linux/ramips/base-files/etc/uci-defaults/leds

@@ -49,6 +49,7 @@ case $board in
 		set_usb_led "fonera20n:orange:usb"
 		set_wifi_led "fonera20n:orange:wifi"
 		;;
+	all0239-3g|\
 	hw550-3g)
 		set_usb_led "hw550-3g:green:usb"
 		;;

target/linux/ramips/base-files/etc/uci-defaults/network

@@ -152,9 +152,10 @@ ramips_setup_macs()
 		wan_mac=$(ramips_get_mac_binary factory 32772)
 		;;
 
+	all0239-3g | \
 	w502u)
-                lan_mac=$(ramips_get_mac_binary factory 40)
+		lan_mac=$(ramips_get_mac_binary factory 40)
-                wan_mac=$(ramips_get_mac_binary factory 46)
+		wan_mac=$(ramips_get_mac_binary factory 46)
 		;;
 
 	wl341v3)

target/linux/ramips/base-files/lib/preinit/06_set_iface_mac

@@ -34,6 +34,7 @@ preinit_set_mac_address() {
 		mac=$(ramips_get_mac_binary devdata 46)
 		ifconfig eth0 hw ether $mac 2>/dev/null
                 ;;
+	all0239-3g |\
 	all0256n |\
 	all5002 |\
 	dir-615-h1 |\

target/linux/ramips/base-files/lib/ramips.sh

@@ -50,6 +50,9 @@ ramips_board_name() {
 	*"Edimax 3g-6200n")
 		name="3g-6200n"
 		;;
+	*"Allnet ALL0239-3G")
+		name="all0239-3g"
+		;;
 	*"Allnet ALL0256N")
 		name="all0256n"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -15,6 +15,7 @@ platform_check_image() {
 
 	case "$board" in
 	3g-6200n | \
+	all0239-3g | \
 	all0256n | \
 	all5002 | \
 	bc2 | \

target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h

@@ -35,6 +35,7 @@ enum ramips_mach_type {
 	RAMIPS_MACH_WL_330N3G,		/* Asus WL-330N3G */
 
 	/* RT3052 based machines */
+	RAMIPS_MACH_ALL0239_3G,		/* ALL0239-3G */
 	RAMIPS_MACH_ARGUS_ATP52B,	/* Argus ATP-52B */
 	RAMIPS_MACH_BC2,		/* NexAira BC2 */
 	RAMIPS_MACH_DAP_1350,		/* D-Link DAP-1350 */

target/linux/ramips/files/arch/mips/ralink/rt305x/mach-hw550-3g.c

@@ -100,3 +100,6 @@ static void __init hw550_3g_init(void)
 
 MIPS_MACHINE(RAMIPS_MACH_HW550_3G, "HW550-3G", "Aztech HW550-3G",
 	     hw550_3g_init);
+
+MIPS_MACHINE(RAMIPS_MACH_ALL0239_3G, "ALL0239-3G", "Allnet ALL0239-3G",
+	     hw550_3g_init);

target/linux/ramips/image/Makefile

@@ -60,6 +60,18 @@ define MkImageLzma
 	$(call MkImage,lzma,$(KDIR)/vmlinux-$(1).bin.lzma,$(KDIR)/vmlinux-$(1).uImage,$(3))
 endef
 
+define MkCombineduImage
+	$(call PatchKernelLzma,$(2),$(3))
+	if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt `expr $(4) - 64` ]; then \
+		echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
+	else if [ `stat -c%s "$(KDIR)/root.$(1)"` -gt $(5) ]; then \
+		echo "Warning: $(KDIR)/root.$(1) is too big"; \
+	else \
+		( dd if=$(KDIR)/vmlinux-$(2).bin.lzma bs=`expr $(4) - 64` conv=sync ; dd if=$(KDIR)/root.$(1) ) > $(KDIR)/vmlinux-$(2).bin.lzma.combined ; \
+	fi ; fi
+	$(call MkImage,lzma,$(KDIR)/vmlinux-$(2).bin.lzma.combined,$(call sysupname,$(1),$(2)),$(6))
+endef
+
 define CatFiles
 	if [ `stat -c%s "$(1)"` -gt $(2) ]; then \
 		echo "Warning: $(1) is too big"; \
@@ -125,6 +137,10 @@ define BuildFirmware/GENERIC_8M/initramfs
 	$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)))
 endef
 
+define BuildFirmware/UIMAGE_8M
+	$(call MkCombineduImage,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)),$(kernel_size_8M),$(rootfs_size_8M),$(7))
+endef
+
 mtdlayout_edimax_3g6200n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2752k(rootfs),128k@0x3e0000(cimage)ro,3648k@0x50000(firmware)
 define BuildFirmware/3G6200N
 	$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_edimax_3g6200n)),917504,2818048)
@@ -367,6 +383,10 @@ define Image/Build/Profile/3G6200N
 	$(call Image/Build/Template/$(fs_squash)/$(1),3G6200N,3g-6200n,3G-6200N,ttyS1,57600,phys)
 endef
 
+define Image/Build/Profile/ALL02393G
+	$(call Image/Build/Template/$(fs_squash)/$(1),UIMAGE_8M,all0239-3g,ALL0239-3G,ttyS1,57600,phys)
+endef
+
 define Image/Build/Profile/ALL0256N
 	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,all0256n,ALL0256N,ttyS1,57600,spi)
 endef
@@ -513,6 +533,7 @@ endef
 ifeq ($(CONFIG_RALINK_RT305X),y)
 define Image/Build/Profile/Default
 	$(call Image/Build/Profile/3G6200N,$(1))
+	$(call Image/Build/Profile/ALL02393G,$(1))
 	$(call Image/Build/Profile/ALL0256N,$(1))
 	$(call Image/Build/Profile/ALL5002,$(1))
 	$(call Image/Build/Profile/ARGUS_ATP52B,$(1))