qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-10 15:47:11 +02:00
Code

add toshiba tftp commands

Browse Source 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@2766 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
wbx 2005-12-25 01:04:46 +00:00
parent 3b44beac3c
commit 70a0737d44
1 changed files with 19 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
openwrt/scripts/flash.sh
View File

@ -1,9 +1,9 @@
#!/bin/bash #!/bin/bash
#
# flash script for linksys and asus routers # tftp flash script for wireless routers
# #
# Copyright (C) 2004 by Oleg I. Vdovikin <oleg@cs.msu.su> # Copyright (C) 2004 by Oleg I. Vdovikin <oleg@cs.msu.su>
# Copyright (C) 2005 by Waldemar Brodkorb <wbx@dass-it.de> # Copyright (C) 2005 by Waldemar Brodkorb <wbx@openwrt.org>
# #
# This program is free software; you can redistribute it and/or modify # This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by # it under the terms of the GNU General Public License as published by
@ -24,11 +24,11 @@ if [ -z "$1" ] || [ ! -f $1 ] || [ -z $2 ]; then
echo Usage: $0 firmware vendor echo Usage: $0 firmware vendor
cat << EOF cat << EOF
IMPORTANT: IMPORTANT:
Notes for Linksys router: Notes for Linksys / Asus WL500gx router:
be sure you have set boot_wait to yes. Power on your router be sure you have set boot_wait to yes. Power on your router
after executing this script. after executing this script.
Notes for Asus router: Notes for Asus WL500g router:
be sure POWER led is flashing (If this is not the case be sure POWER led is flashing (If this is not the case
poweroff the device, push the reset button & power on poweroff the device, push the reset button & power on
it again, then release button) it again, then release button)
@ -36,6 +36,16 @@ Notes for Asus router:
1) connect your pc to the LAN port 1) connect your pc to the LAN port
2) be sure your link is up and has an address in the 2) be sure your link is up and has an address in the
192.168.1.0/24 address range (and not the 192.168.1.1) 192.168.1.0/24 address range (and not the 192.168.1.1)
Notes for Toshiba router:
boot_wait is enabled by default on these units.
1) connect your pc to any of the four LAN ports
2) be sure your link is up and has an address in the
192.168.10.1/24 address range (and not the 192.168.10.1)
3) run this script (unit will only accept .trx images)
4) Turn unit power on.
EOF EOF
exit 0 exit 0
fi fi
@ -49,4 +59,8 @@ elif [ "$2" == "linksys" ]; then
echo Flashing 192.168.1.1 using $1... echo Flashing 192.168.1.1 using $1...
echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.1.1 echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.1.1
echo Please wait until power led stops flashing. Do not poweroff! Then you can login via telnet 192.168.1.1. echo Please wait until power led stops flashing. Do not poweroff! Then you can login via telnet 192.168.1.1.
elif [ "$2" == "toshiba" ]; then
echo Flashing 192.168.10.1 using $1...
echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.10.1
echo Unit will automatically reboot within 5 minutes. Do not power off. Then you can login via telnet 192.168.10.1.
fi fi