add ixp4xx 2.6.25 patchset

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10891 3c298f89-4303-0410-b956-a3cf2f4a3e73
2024-11-27 22:38:26 +02:00 · 2008-04-20 18:17:38 +00:00 · 2008-04-20 18:17:38 +00:00 · 7188c772bb
commit 7188c772bb
parent f0c86e1c7c
32 changed files with 8815 additions and 0 deletions
--- a/target/linux/ixp4xx/patches-2.6.25/010-rtc_isl1208_new_style.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/010-rtc_isl1208_new_style.patch
@ -0,0 +1,654 @@
+---
+ drivers/rtc/rtc-isl1208.c |  357 +++++++++++++++++++++-------------------------
+ 1 file changed, 170 insertions(+), 187 deletions(-)
+
+Index: linux-2.6.25-rc6-armeb/drivers/rtc/rtc-isl1208.c
+===================================================================
+--- linux-2.6.25-rc6-armeb.orig/drivers/rtc/rtc-isl1208.c	2008-03-20 10:26:41.000000000 +1030
+++ linux-2.6.25-rc6-armeb/drivers/rtc/rtc-isl1208.c	2008-03-20 10:26:53.000000000 +1030
+@@ -15,16 +15,15 @@
+ #include <linux/bcd.h>
+ #include <linux/rtc.h>
+ 
+-#define DRV_NAME "isl1208"
+-#define DRV_VERSION "0.2"
+#define DRV_VERSION "0.3"
+ 
+ /* Register map */
+ /* rtc section */
+ #define ISL1208_REG_SC  0x00
+ #define ISL1208_REG_MN  0x01
+ #define ISL1208_REG_HR  0x02
+-#define ISL1208_REG_HR_MIL     (1<<7) /* 24h/12h mode */
+-#define ISL1208_REG_HR_PM      (1<<5) /* PM/AM bit in 12h mode */
+#define ISL1208_REG_HR_MIL     (1<<7)	/* 24h/12h mode */
+#define ISL1208_REG_HR_PM      (1<<5)	/* PM/AM bit in 12h mode */
+ #define ISL1208_REG_DT  0x03
+ #define ISL1208_REG_MO  0x04
+ #define ISL1208_REG_YR  0x05
+@@ -33,14 +32,14 @@
+ 
+ /* control/status section */
+ #define ISL1208_REG_SR  0x07
+-#define ISL1208_REG_SR_ARST    (1<<7) /* auto reset */
+-#define ISL1208_REG_SR_XTOSCB  (1<<6) /* crystal oscillator */
+-#define ISL1208_REG_SR_WRTC    (1<<4) /* write rtc */
+-#define ISL1208_REG_SR_ALM     (1<<2) /* alarm */
+-#define ISL1208_REG_SR_BAT     (1<<1) /* battery */
+-#define ISL1208_REG_SR_RTCF    (1<<0) /* rtc fail */
+#define ISL1208_REG_SR_ARST    (1<<7)	/* auto reset */
+#define ISL1208_REG_SR_XTOSCB  (1<<6)	/* crystal oscillator */
+#define ISL1208_REG_SR_WRTC    (1<<4)	/* write rtc */
+#define ISL1208_REG_SR_ALM     (1<<2)	/* alarm */
+#define ISL1208_REG_SR_BAT     (1<<1)	/* battery */
+#define ISL1208_REG_SR_RTCF    (1<<0)	/* rtc fail */
+ #define ISL1208_REG_INT 0x08
+-#define ISL1208_REG_09  0x09 /* reserved */
+#define ISL1208_REG_09  0x09	/* reserved */
+ #define ISL1208_REG_ATR 0x0a
+ #define ISL1208_REG_DTR 0x0b
+ 
+@@ -58,39 +57,21 @@
+ #define ISL1208_REG_USR2 0x13
+ #define ISL1208_USR_SECTION_LEN 2
+ 
+-/* i2c configuration */
+-#define ISL1208_I2C_ADDR 0xde
+-
+-static const unsigned short normal_i2c[] = {
+-	ISL1208_I2C_ADDR>>1, I2C_CLIENT_END
+-};
+-I2C_CLIENT_INSMOD; /* defines addr_data */
+-
+-static int isl1208_attach_adapter(struct i2c_adapter *adapter);
+-static int isl1208_detach_client(struct i2c_client *client);
+-
+-static struct i2c_driver isl1208_driver = {
+-	.driver		= {
+-		.name	= DRV_NAME,
+-	},
+-	.id		= I2C_DRIVERID_ISL1208,
+-	.attach_adapter = &isl1208_attach_adapter,
+-	.detach_client	= &isl1208_detach_client,
+-};
+static struct i2c_driver isl1208_driver;
+ 
+ /* block read */
+ static int
+ isl1208_i2c_read_regs(struct i2c_client *client, u8 reg, u8 buf[],
+-		       unsigned len)
+		      unsigned len)
+ {
+ 	u8 reg_addr[1] = { reg };
+ 	struct i2c_msg msgs[2] = {
+-		{ client->addr, client->flags, sizeof(reg_addr), reg_addr },
+-		{ client->addr, client->flags | I2C_M_RD, len, buf }
+		{client->addr, client->flags, sizeof(reg_addr), reg_addr}
+		,
+		{client->addr, client->flags | I2C_M_RD, len, buf}
+ 	};
+ 	int ret;
+ 
+-	BUG_ON(len == 0);
+ 	BUG_ON(reg > ISL1208_REG_USR2);
+ 	BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
+ 
+@@ -103,15 +84,14 @@
+ /* block write */
+ static int
+ isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
+-		       unsigned len)
+		     unsigned len)
+ {
+ 	u8 i2c_buf[ISL1208_REG_USR2 + 2];
+ 	struct i2c_msg msgs[1] = {
+-		{ client->addr, client->flags, len + 1, i2c_buf }
+		{client->addr, client->flags, len + 1, i2c_buf}
+ 	};
+ 	int ret;
+ 
+-	BUG_ON(len == 0);
+ 	BUG_ON(reg > ISL1208_REG_USR2);
+ 	BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
+ 
+@@ -125,7 +105,8 @@
+ }
+ 
+ /* simple check to see wether we have a isl1208 */
+-static int isl1208_i2c_validate_client(struct i2c_client *client)
+static int
+isl1208_i2c_validate_client(struct i2c_client *client)
+ {
+ 	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
+ 	u8 zero_mask[ISL1208_RTC_SECTION_LEN] = {
+@@ -139,24 +120,29 @@
+ 		return ret;
+ 
+ 	for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) {
+-		if (regs[i] & zero_mask[i]) /* check if bits are cleared */
+		if (regs[i] & zero_mask[i])	/* check if bits are cleared */
+ 			return -ENODEV;
+ 	}
+ 
+ 	return 0;
+ }
+ 
+-static int isl1208_i2c_get_sr(struct i2c_client *client)
+static int
+isl1208_i2c_get_sr(struct i2c_client *client)
+ {
+-	return i2c_smbus_read_byte_data(client, ISL1208_REG_SR) == -1 ? -EIO:0;
+	int sr = i2c_smbus_read_byte_data(client, ISL1208_REG_SR);
+	if (sr < 0)
+		return -EIO;
+
+	return sr;
+ }
+ 
+-static int isl1208_i2c_get_atr(struct i2c_client *client)
+static int
+isl1208_i2c_get_atr(struct i2c_client *client)
+ {
+ 	int atr = i2c_smbus_read_byte_data(client, ISL1208_REG_ATR);
+-
+ 	if (atr < 0)
+-		return -EIO;
+		return atr;
+ 
+ 	/* The 6bit value in the ATR register controls the load
+ 	 * capacitance C_load * in steps of 0.25pF
+@@ -169,51 +155,54 @@
+ 	 *
+ 	 */
+ 
+-	atr &= 0x3f; /* mask out lsb */
+-	atr ^= 1<<5; /* invert 6th bit */
+-	atr += 2*9; /* add offset of 4.5pF; unit[atr] = 0.25pF */
+	atr &= 0x3f;		/* mask out lsb */
+	atr ^= 1 << 5;		/* invert 6th bit */
+	atr += 2 * 9;		/* add offset of 4.5pF; unit[atr] = 0.25pF */
+ 
+ 	return atr;
+ }
+ 
+-static int isl1208_i2c_get_dtr(struct i2c_client *client)
+static int
+isl1208_i2c_get_dtr(struct i2c_client *client)
+ {
+ 	int dtr = i2c_smbus_read_byte_data(client, ISL1208_REG_DTR);
+-
+ 	if (dtr < 0)
+ 		return -EIO;
+ 
+ 	/* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */
+-	dtr = ((dtr & 0x3) * 20) * (dtr & (1<<2) ? -1 : 1);
+	dtr = ((dtr & 0x3) * 20) * (dtr & (1 << 2) ? -1 : 1);
+ 
+ 	return dtr;
+ }
+ 
+-static int isl1208_i2c_get_usr(struct i2c_client *client)
+static int
+isl1208_i2c_get_usr(struct i2c_client *client)
+ {
+ 	u8 buf[ISL1208_USR_SECTION_LEN] = { 0, };
+ 	int ret;
+ 
+-	ret = isl1208_i2c_read_regs (client, ISL1208_REG_USR1, buf,
+-				   ISL1208_USR_SECTION_LEN);
+	ret = isl1208_i2c_read_regs(client, ISL1208_REG_USR1, buf,
+				    ISL1208_USR_SECTION_LEN);
+ 	if (ret < 0)
+ 		return ret;
+ 
+ 	return (buf[1] << 8) | buf[0];
+ }
+ 
+-static int isl1208_i2c_set_usr(struct i2c_client *client, u16 usr)
+static int
+isl1208_i2c_set_usr(struct i2c_client *client, u16 usr)
+ {
+ 	u8 buf[ISL1208_USR_SECTION_LEN];
+ 
+ 	buf[0] = usr & 0xff;
+ 	buf[1] = (usr >> 8) & 0xff;
+ 
+-	return isl1208_i2c_set_regs (client, ISL1208_REG_USR1, buf,
+-				     ISL1208_USR_SECTION_LEN);
+	return isl1208_i2c_set_regs(client, ISL1208_REG_USR1, buf,
+				    ISL1208_USR_SECTION_LEN);
+ }
+ 
+-static int isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
+static int
+isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
+ {
+ 	struct i2c_client *const client = to_i2c_client(dev);
+ 	int sr, dtr, atr, usr;
+@@ -230,20 +219,19 @@
+ 		   (sr & ISL1208_REG_SR_ALM) ? " ALM" : "",
+ 		   (sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "",
+ 		   (sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "",
+-		   (sr & ISL1208_REG_SR_ARST) ? " ARST" : "",
+-		   sr);
+		   (sr & ISL1208_REG_SR_ARST) ? " ARST" : "", sr);
+ 
+ 	seq_printf(seq, "batt_status\t: %s\n",
+ 		   (sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay");
+ 
+ 	dtr = isl1208_i2c_get_dtr(client);
+-	if (dtr >= 0 -1)
+	if (dtr >= 0 - 1)
+ 		seq_printf(seq, "digital_trim\t: %d ppm\n", dtr);
+ 
+ 	atr = isl1208_i2c_get_atr(client);
+ 	if (atr >= 0)
+ 		seq_printf(seq, "analog_trim\t: %d.%.2d pF\n",
+-			   atr>>2, (atr&0x3)*25);
+			   atr >> 2, (atr & 0x3) * 25);
+ 
+ 	usr = isl1208_i2c_get_usr(client);
+ 	if (usr >= 0)
+@@ -252,9 +240,8 @@
+ 	return 0;
+ }
+ 
+-
+-static int isl1208_i2c_read_time(struct i2c_client *client,
+-				 struct rtc_time *tm)
+static int
+isl1208_i2c_read_time(struct i2c_client *client, struct rtc_time *tm)
+ {
+ 	int sr;
+ 	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
+@@ -274,27 +261,30 @@
+ 
+ 	tm->tm_sec = BCD2BIN(regs[ISL1208_REG_SC]);
+ 	tm->tm_min = BCD2BIN(regs[ISL1208_REG_MN]);
+-	{ /* HR field has a more complex interpretation */
+
+	/* HR field has a more complex interpretation */
+	{
+ 		const u8 _hr = regs[ISL1208_REG_HR];
+-		if (_hr & ISL1208_REG_HR_MIL) /* 24h format */
+		if (_hr & ISL1208_REG_HR_MIL)	/* 24h format */
+ 			tm->tm_hour = BCD2BIN(_hr & 0x3f);
+-		else { // 12h format
+		else {
+			/* 12h format */
+ 			tm->tm_hour = BCD2BIN(_hr & 0x1f);
+-			if (_hr & ISL1208_REG_HR_PM) /* PM flag set */
+			if (_hr & ISL1208_REG_HR_PM)	/* PM flag set */
+ 				tm->tm_hour += 12;
+ 		}
+ 	}
+ 
+ 	tm->tm_mday = BCD2BIN(regs[ISL1208_REG_DT]);
+-	tm->tm_mon = BCD2BIN(regs[ISL1208_REG_MO]) - 1; /* rtc starts at 1 */
+	tm->tm_mon = BCD2BIN(regs[ISL1208_REG_MO]) - 1;	/* rtc starts at 1 */
+ 	tm->tm_year = BCD2BIN(regs[ISL1208_REG_YR]) + 100;
+ 	tm->tm_wday = BCD2BIN(regs[ISL1208_REG_DW]);
+ 
+ 	return 0;
+ }
+ 
+-static int isl1208_i2c_read_alarm(struct i2c_client *client,
+-				  struct rtc_wkalrm *alarm)
+static int
+isl1208_i2c_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
+ {
+ 	struct rtc_time *const tm = &alarm->time;
+ 	u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
+@@ -307,7 +297,7 @@
+ 	}
+ 
+ 	sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs,
+-				  ISL1208_ALARM_SECTION_LEN);
+				   ISL1208_ALARM_SECTION_LEN);
+ 	if (sr < 0) {
+ 		dev_err(&client->dev, "%s: reading alarm section failed\n",
+ 			__func__);
+@@ -315,23 +305,25 @@
+ 	}
+ 
+ 	/* MSB of each alarm register is an enable bit */
+-	tm->tm_sec  = BCD2BIN(regs[ISL1208_REG_SCA-ISL1208_REG_SCA] & 0x7f);
+-	tm->tm_min  = BCD2BIN(regs[ISL1208_REG_MNA-ISL1208_REG_SCA] & 0x7f);
+-	tm->tm_hour = BCD2BIN(regs[ISL1208_REG_HRA-ISL1208_REG_SCA] & 0x3f);
+-	tm->tm_mday = BCD2BIN(regs[ISL1208_REG_DTA-ISL1208_REG_SCA] & 0x3f);
+-	tm->tm_mon  = BCD2BIN(regs[ISL1208_REG_MOA-ISL1208_REG_SCA] & 0x1f)-1;
+-	tm->tm_wday = BCD2BIN(regs[ISL1208_REG_DWA-ISL1208_REG_SCA] & 0x03);
+	tm->tm_sec = BCD2BIN(regs[ISL1208_REG_SCA - ISL1208_REG_SCA] & 0x7f);
+	tm->tm_min = BCD2BIN(regs[ISL1208_REG_MNA - ISL1208_REG_SCA] & 0x7f);
+	tm->tm_hour = BCD2BIN(regs[ISL1208_REG_HRA - ISL1208_REG_SCA] & 0x3f);
+	tm->tm_mday = BCD2BIN(regs[ISL1208_REG_DTA - ISL1208_REG_SCA] & 0x3f);
+	tm->tm_mon =
+		BCD2BIN(regs[ISL1208_REG_MOA - ISL1208_REG_SCA] & 0x1f) - 1;
+	tm->tm_wday = BCD2BIN(regs[ISL1208_REG_DWA - ISL1208_REG_SCA] & 0x03);
+ 
+ 	return 0;
+ }
+ 
+-static int isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm)
+static int
+isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm)
+ {
+ 	return isl1208_i2c_read_time(to_i2c_client(dev), tm);
+ }
+ 
+-static int isl1208_i2c_set_time(struct i2c_client *client,
+-				struct rtc_time const *tm)
+static int
+isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
+ {
+ 	int sr;
+ 	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
+@@ -353,7 +345,7 @@
+ 	}
+ 
+ 	/* set WRTC */
+-	sr = i2c_smbus_write_byte_data (client, ISL1208_REG_SR,
+	sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
+ 				       sr | ISL1208_REG_SR_WRTC);
+ 	if (sr < 0) {
+ 		dev_err(&client->dev, "%s: writing SR failed\n", __func__);
+@@ -369,7 +361,7 @@
+ 	}
+ 
+ 	/* clear WRTC again */
+-	sr = i2c_smbus_write_byte_data (client, ISL1208_REG_SR,
+	sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
+ 				       sr & ~ISL1208_REG_SR_WRTC);
+ 	if (sr < 0) {
+ 		dev_err(&client->dev, "%s: writing SR failed\n", __func__);
+@@ -380,70 +372,69 @@
+ }
+ 
+ 
+-static int isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm)
+static int
+isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm)
+ {
+ 	return isl1208_i2c_set_time(to_i2c_client(dev), tm);
+ }
+ 
+-static int isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+static int
+isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+ {
+ 	return isl1208_i2c_read_alarm(to_i2c_client(dev), alarm);
+ }
+ 
+ static const struct rtc_class_ops isl1208_rtc_ops = {
+-	.proc		= isl1208_rtc_proc,
+-	.read_time	= isl1208_rtc_read_time,
+-	.set_time	= isl1208_rtc_set_time,
+-	.read_alarm	= isl1208_rtc_read_alarm,
+-	//.set_alarm	= isl1208_rtc_set_alarm,
+	.proc = isl1208_rtc_proc,
+	.read_time = isl1208_rtc_read_time,
+	.set_time = isl1208_rtc_set_time,
+	.read_alarm = isl1208_rtc_read_alarm,
+	/*.set_alarm    = isl1208_rtc_set_alarm, */
+ };
+ 
+ /* sysfs interface */
+ 
+-static ssize_t isl1208_sysfs_show_atrim(struct device *dev,
+-					struct device_attribute *attr,
+-					char *buf)
+static ssize_t
+isl1208_sysfs_show_atrim(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+ {
+-	int atr;
+-
+-	atr = isl1208_i2c_get_atr(to_i2c_client(dev));
+	int atr = isl1208_i2c_get_atr(to_i2c_client(dev));
+ 	if (atr < 0)
+ 		return atr;
+ 
+-	return sprintf(buf, "%d.%.2d pF\n", atr>>2, (atr&0x3)*25);
+	return sprintf(buf, "%d.%.2d pF\n", atr >> 2, (atr & 0x3) * 25);
+ }
+
+ static DEVICE_ATTR(atrim, S_IRUGO, isl1208_sysfs_show_atrim, NULL);
+ 
+-static ssize_t isl1208_sysfs_show_dtrim(struct device *dev,
+-					struct device_attribute *attr,
+-					char *buf)
+static ssize_t
+isl1208_sysfs_show_dtrim(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+ {
+-	int dtr;
+-
+-	dtr = isl1208_i2c_get_dtr(to_i2c_client(dev));
+	int dtr = isl1208_i2c_get_dtr(to_i2c_client(dev));
+ 	if (dtr < 0)
+ 		return dtr;
+ 
+ 	return sprintf(buf, "%d ppm\n", dtr);
+ }
+
+ static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL);
+ 
+-static ssize_t isl1208_sysfs_show_usr(struct device *dev,
+-				       struct device_attribute *attr,
+-				       char *buf)
+static ssize_t
+isl1208_sysfs_show_usr(struct device *dev,
+		       struct device_attribute *attr, char *buf)
+ {
+-	int usr;
+-
+-	usr = isl1208_i2c_get_usr(to_i2c_client(dev));
+	int usr = isl1208_i2c_get_usr(to_i2c_client(dev));
+ 	if (usr < 0)
+ 		return usr;
+ 
+ 	return sprintf(buf, "0x%.4x\n", usr);
+ }
+ 
+-static ssize_t isl1208_sysfs_store_usr(struct device *dev,
+-				       struct device_attribute *attr,
+-				       const char *buf, size_t count)
+static ssize_t
+isl1208_sysfs_store_usr(struct device *dev,
+			struct device_attribute *attr,
+			const char *buf, size_t count)
+ {
+ 	int usr = -1;
+ 
+@@ -460,124 +451,116 @@
+ 
+ 	return isl1208_i2c_set_usr(to_i2c_client(dev), usr) ? -EIO : count;
+ }
+
+ static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr,
+ 		   isl1208_sysfs_store_usr);
+ 
+ static int
+-isl1208_probe(struct i2c_adapter *adapter, int addr, int kind)
+isl1208_sysfs_register(struct device *dev)
+ {
+-	int rc = 0;
+-	struct i2c_client *new_client = NULL;
+-	struct rtc_device *rtc = NULL;
+	int err;
+
+	err = device_create_file(dev, &dev_attr_atrim);
+	if (err)
+		return err;
+ 
+-	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
+-		rc = -ENODEV;
+-		goto failout;
+	err = device_create_file(dev, &dev_attr_dtrim);
+	if (err) {
+		device_remove_file(dev, &dev_attr_atrim);
+		return err;
+ 	}
+ 
+-	new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+-	if (new_client == NULL) {
+-		rc = -ENOMEM;
+-		goto failout;
+	err = device_create_file(dev, &dev_attr_usr);
+	if (err) {
+		device_remove_file(dev, &dev_attr_atrim);
+		device_remove_file(dev, &dev_attr_dtrim);
+ 	}
+ 
+-	new_client->addr = addr;
+-	new_client->adapter = adapter;
+-	new_client->driver = &isl1208_driver;
+-	new_client->flags = 0;
+-	strcpy(new_client->name, DRV_NAME);
+	return 0;
+}
+ 
+-	if (kind < 0) {
+-		rc = isl1208_i2c_validate_client(new_client);
+-		if (rc < 0)
+-			goto failout;
+-	}
+static int
+isl1208_sysfs_unregister(struct device *dev)
+{
+	device_remove_file(dev, &dev_attr_atrim);
+	device_remove_file(dev, &dev_attr_atrim);
+	device_remove_file(dev, &dev_attr_usr);
+
+	return 0;
+}
+
+static int
+isl1208_probe(struct i2c_client *client)
+{
+	int rc = 0;
+	struct rtc_device *rtc;
+ 
+-	rc = i2c_attach_client(new_client);
+-	if (rc < 0)
+-		goto failout;
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+ 
+-	dev_info(&new_client->dev,
+	if (isl1208_i2c_validate_client(client) < 0)
+		return -ENODEV;
+
+	dev_info(&client->dev,
+ 		 "chip found, driver version " DRV_VERSION "\n");
+ 
+ 	rtc = rtc_device_register(isl1208_driver.driver.name,
+-				  &new_client->dev,
+-				  &isl1208_rtc_ops, THIS_MODULE);
+-
+-	if (IS_ERR(rtc)) {
+-		rc = PTR_ERR(rtc);
+-		goto failout_detach;
+-	}
+				  &client->dev, &isl1208_rtc_ops,
+				  THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+ 
+-	i2c_set_clientdata(new_client, rtc);
+	i2c_set_clientdata(client, rtc);
+ 
+-	rc = isl1208_i2c_get_sr(new_client);
+	rc = isl1208_i2c_get_sr(client);
+ 	if (rc < 0) {
+-		dev_err(&new_client->dev, "reading status failed\n");
+-		goto failout_unregister;
+		dev_err(&client->dev, "reading status failed\n");
+		goto exit_unregister;
+ 	}
+ 
+ 	if (rc & ISL1208_REG_SR_RTCF)
+-		dev_warn(&new_client->dev, "rtc power failure detected, "
+		dev_warn(&client->dev, "rtc power failure detected, "
+ 			 "please set clock.\n");
+ 
+-	rc = device_create_file(&new_client->dev, &dev_attr_atrim);
+-	if (rc < 0)
+-		goto failout_unregister;
+-	rc = device_create_file(&new_client->dev, &dev_attr_dtrim);
+-	if (rc < 0)
+-		goto failout_atrim;
+-	rc = device_create_file(&new_client->dev, &dev_attr_usr);
+-	if (rc < 0)
+-		goto failout_dtrim;
+	rc = isl1208_sysfs_register(&client->dev);
+	if (rc)
+		goto exit_unregister;
+ 
+ 	return 0;
+ 
+- failout_dtrim:
+-	device_remove_file(&new_client->dev, &dev_attr_dtrim);
+- failout_atrim:
+-	device_remove_file(&new_client->dev, &dev_attr_atrim);
+- failout_unregister:
+      exit_unregister:
+ 	rtc_device_unregister(rtc);
+- failout_detach:
+-	i2c_detach_client(new_client);
+- failout:
+-	kfree(new_client);
+-	return rc;
+-}
+ 
+-static int
+-isl1208_attach_adapter (struct i2c_adapter *adapter)
+-{
+-	return i2c_probe(adapter, &addr_data, isl1208_probe);
+	return rc;
+ }
+ 
+ static int
+-isl1208_detach_client(struct i2c_client *client)
+isl1208_remove(struct i2c_client *client)
+ {
+-	int rc;
+-	struct rtc_device *const rtc = i2c_get_clientdata(client);
+-
+-	if (rtc)
+-		rtc_device_unregister(rtc); /* do we need to kfree? */
+-
+-	rc = i2c_detach_client(client);
+-	if (rc)
+-		return rc;
+	struct rtc_device *rtc = i2c_get_clientdata(client);
+ 
+-	kfree(client);
+	isl1208_sysfs_unregister(&client->dev);
+	rtc_device_unregister(rtc);
+ 
+ 	return 0;
+ }
+ 
+-/* module management */
+static struct i2c_driver isl1208_driver = {
+	.driver = {
+		   .name = "rtc-isl1208",
+		   },
+	.probe = isl1208_probe,
+	.remove = isl1208_remove,
+};
+ 
+-static int __init isl1208_init(void)
+static int __init
+isl1208_init(void)
+ {
+ 	return i2c_add_driver(&isl1208_driver);
+ }
+ 
+-static void __exit isl1208_exit(void)
+static void __exit
+isl1208_exit(void)
+ {
+ 	i2c_del_driver(&isl1208_driver);
+ }
--- a/target/linux/ixp4xx/patches-2.6.25/011-rtc_pcf8563_new_style.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/011-rtc_pcf8563_new_style.patch
@ -0,0 +1,193 @@
+---
+ drivers/rtc/rtc-pcf8563.c |  109 +++++++++++++---------------------------------
+ 1 file changed, 32 insertions(+), 77 deletions(-)
+
+Index: linux-2.6.25-rc6-armeb/drivers/rtc/rtc-pcf8563.c
+===================================================================
+--- linux-2.6.25-rc6-armeb.orig/drivers/rtc/rtc-pcf8563.c	2008-03-20 10:26:43.000000000 +1030
+++ linux-2.6.25-rc6-armeb/drivers/rtc/rtc-pcf8563.c	2008-03-20 10:26:51.000000000 +1030
+@@ -18,17 +18,7 @@
+ #include <linux/bcd.h>
+ #include <linux/rtc.h>
+ 
+-#define DRV_VERSION "0.4.2"
+-
+-/* Addresses to scan: none
+- * This chip cannot be reliably autodetected. An empty eeprom
+- * located at 0x51 will pass the validation routine due to
+- * the way the registers are implemented.
+- */
+-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
+-
+-/* Module parameters */
+-I2C_CLIENT_INSMOD;
+#define DRV_VERSION "0.4.3"
+ 
+ #define PCF8563_REG_ST1		0x00 /* status */
+ #define PCF8563_REG_ST2		0x01
+@@ -53,8 +43,10 @@
+ #define PCF8563_SC_LV		0x80 /* low voltage */
+ #define PCF8563_MO_C		0x80 /* century */
+ 
+static struct i2c_driver pcf8563_driver;
+
+ struct pcf8563 {
+-	struct i2c_client client;
+	struct rtc_device *rtc;
+ 	/*
+ 	 * The meaning of MO_C bit varies by the chip type.
+ 	 * From PCF8563 datasheet: this bit is toggled when the years
+@@ -72,16 +64,13 @@
+ 	int c_polarity;	/* 0: MO_C=1 means 19xx, otherwise MO_C=1 means 20xx */
+ };
+ 
+-static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind);
+-static int pcf8563_detach(struct i2c_client *client);
+-
+ /*
+  * In the routines that deal directly with the pcf8563 hardware, we use
+  * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
+  */
+ static int pcf8563_get_datetime(struct i2c_client *client, struct rtc_time *tm)
+ {
+-	struct pcf8563 *pcf8563 = container_of(client, struct pcf8563, client);
+	struct pcf8563 *pcf8563 = i2c_get_clientdata(client);
+ 	unsigned char buf[13] = { PCF8563_REG_ST1 };
+ 
+ 	struct i2c_msg msgs[] = {
+@@ -138,7 +127,7 @@
+ 
+ static int pcf8563_set_datetime(struct i2c_client *client, struct rtc_time *tm)
+ {
+-	struct pcf8563 *pcf8563 = container_of(client, struct pcf8563, client);
+	struct pcf8563 *pcf8563 = i2c_get_clientdata(client);
+ 	int i, err;
+ 	unsigned char buf[9];
+ 
+@@ -257,100 +246,66 @@
+ 	.set_time	= pcf8563_rtc_set_time,
+ };
+ 
+-static int pcf8563_attach(struct i2c_adapter *adapter)
+-{
+-	return i2c_probe(adapter, &addr_data, pcf8563_probe);
+-}
+-
+-static struct i2c_driver pcf8563_driver = {
+-	.driver		= {
+-		.name	= "pcf8563",
+-	},
+-	.id		= I2C_DRIVERID_PCF8563,
+-	.attach_adapter = &pcf8563_attach,
+-	.detach_client	= &pcf8563_detach,
+-};
+-
+-static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind)
+static int pcf8563_probe(struct i2c_client *client)
+ {
+ 	struct pcf8563 *pcf8563;
+-	struct i2c_client *client;
+-	struct rtc_device *rtc;
+ 
+ 	int err = 0;
+ 
+-	dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
+	dev_dbg(&client->dev, "%s\n", __FUNCTION__);
+ 
+-	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
+-		err = -ENODEV;
+-		goto exit;
+-	}
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+ 
+-	if (!(pcf8563 = kzalloc(sizeof(struct pcf8563), GFP_KERNEL))) {
+-		err = -ENOMEM;
+-		goto exit;
+-	}
+-
+-	client = &pcf8563->client;
+-	client->addr = address;
+-	client->driver = &pcf8563_driver;
+-	client->adapter	= adapter;
+-
+-	strlcpy(client->name, pcf8563_driver.driver.name, I2C_NAME_SIZE);
+	if (!(pcf8563 = kzalloc(sizeof(struct pcf8563), GFP_KERNEL)))
+		return -ENOMEM;
+ 
+ 	/* Verify the chip is really an PCF8563 */
+-	if (kind < 0) {
+-		if (pcf8563_validate_client(client) < 0) {
+-			err = -ENODEV;
+-			goto exit_kfree;
+-		}
+-	}
+-
+-	/* Inform the i2c layer */
+-	if ((err = i2c_attach_client(client)))
+	if (pcf8563_validate_client(client) < 0) {
+		err = -ENODEV;
+ 		goto exit_kfree;
+	}
+ 
+ 	dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
+ 
+-	rtc = rtc_device_register(pcf8563_driver.driver.name, &client->dev,
+	pcf8563->rtc = rtc_device_register(pcf8563_driver.driver.name, &client->dev,
+ 				&pcf8563_rtc_ops, THIS_MODULE);
+ 
+-	if (IS_ERR(rtc)) {
+-		err = PTR_ERR(rtc);
+-		goto exit_detach;
+	if (IS_ERR(pcf8563->rtc)) {
+		err = PTR_ERR(pcf8563->rtc);
+		goto exit_kfree;
+ 	}
+ 
+-	i2c_set_clientdata(client, rtc);
+	i2c_set_clientdata(client, pcf8563);
+ 
+ 	return 0;
+ 
+-exit_detach:
+-	i2c_detach_client(client);
+-
+ exit_kfree:
+ 	kfree(pcf8563);
+ 
+-exit:
+ 	return err;
+ }
+ 
+-static int pcf8563_detach(struct i2c_client *client)
+static int pcf8563_remove(struct i2c_client *client)
+ {
+-	struct pcf8563 *pcf8563 = container_of(client, struct pcf8563, client);
+-	int err;
+-	struct rtc_device *rtc = i2c_get_clientdata(client);
+	struct pcf8563 *pcf8563 = i2c_get_clientdata(client);
+ 
+-	if (rtc)
+-		rtc_device_unregister(rtc);
+-
+-	if ((err = i2c_detach_client(client)))
+-		return err;
+	if (pcf8563->rtc)
+		rtc_device_unregister(pcf8563->rtc);
+ 
+ 	kfree(pcf8563);
+ 
+ 	return 0;
+ }
+ 
+static struct i2c_driver pcf8563_driver = {
+	.driver		= {
+		.name	= "rtc-pcf8563",
+	},
+	.probe		= pcf8563_probe,
+	.remove		= pcf8563_remove,
+};
+
+ static int __init pcf8563_init(void)
+ {
+ 	return i2c_add_driver(&pcf8563_driver);
--- a/target/linux/ixp4xx/patches-2.6.25/012-rtc_x1205_new_style.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/012-rtc_x1205_new_style.patch
@ -0,0 +1,197 @@
+---
+ drivers/rtc/rtc-x1205.c |  128 ++++++++++++++++--------------------------------
+ 1 file changed, 43 insertions(+), 85 deletions(-)
+
+Index: linux-2.6.25-rc6-armeb/drivers/rtc/rtc-x1205.c
+===================================================================
+--- linux-2.6.25-rc6-armeb.orig/drivers/rtc/rtc-x1205.c	2008-03-20 10:24:13.000000000 +1030
+++ linux-2.6.25-rc6-armeb/drivers/rtc/rtc-x1205.c	2008-03-20 10:24:23.000000000 +1030
+@@ -22,20 +22,7 @@
+ #include <linux/rtc.h>
+ #include <linux/delay.h>
+ 
+-#define DRV_VERSION "1.0.7"
+-
+-/* Addresses to scan: none. This chip is located at
+- * 0x6f and uses a two bytes register addressing.
+- * Two bytes need to be written to read a single register,
+- * while most other chips just require one and take the second
+- * one as the data to be written. To prevent corrupting
+- * unknown chips, the user must explicitly set the probe parameter.
+- */
+-
+-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
+-
+-/* Insmod parameters */
+-I2C_CLIENT_INSMOD;
+#define DRV_VERSION "1.0.8"
+ 
+ /* offsets into CCR area */
+ 
+@@ -91,19 +78,7 @@
+ 
+ #define X1205_HR_MIL		0x80	/* Set in ccr.hour for 24 hr mode */
+ 
+-/* Prototypes */
+-static int x1205_attach(struct i2c_adapter *adapter);
+-static int x1205_detach(struct i2c_client *client);
+-static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
+-
+-static struct i2c_driver x1205_driver = {
+-	.driver		= {
+-		.name	= "x1205",
+-	},
+-	.id		= I2C_DRIVERID_X1205,
+-	.attach_adapter = &x1205_attach,
+-	.detach_client	= &x1205_detach,
+-};
+static struct i2c_driver x1205_driver;
+ 
+ /*
+  * In the routines that deal directly with the x1205 hardware, we use
+@@ -497,58 +472,51 @@
+ }
+ static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL);
+ 
+-static int x1205_attach(struct i2c_adapter *adapter)
+static int x1205_sysfs_register(struct device *dev)
+{
+	int err;
+
+	err = device_create_file(dev, &dev_attr_atrim);
+	if (err)
+		return err;
+
+	err = device_create_file(dev, &dev_attr_dtrim);
+	if (err)
+		device_remove_file(dev, &dev_attr_atrim);
+
+	return err;
+}
+
+static void x1205_sysfs_unregister(struct device *dev)
+ {
+-	return i2c_probe(adapter, &addr_data, x1205_probe);
+	device_remove_file(dev, &dev_attr_atrim);
+	device_remove_file(dev, &dev_attr_dtrim);
+ }
+ 
+-static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
+
+static int x1205_probe(struct i2c_client *client)
+ {
+ 	int err = 0;
+ 	unsigned char sr;
+-	struct i2c_client *client;
+ 	struct rtc_device *rtc;
+ 
+-	dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
+	dev_dbg(&client->dev, "%s\n", __FUNCTION__);
+ 
+-	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
+-		err = -ENODEV;
+-		goto exit;
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		return -ENODEV;
+ 	}
+ 
+-	if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
+-		err = -ENOMEM;
+-		goto exit;
+	if (x1205_validate_client(client) < 0) {
+		return -ENODEV;
+ 	}
+ 
+-	/* I2C client */
+-	client->addr = address;
+-	client->driver = &x1205_driver;
+-	client->adapter	= adapter;
+-
+-	strlcpy(client->name, x1205_driver.driver.name, I2C_NAME_SIZE);
+-
+-	/* Verify the chip is really an X1205 */
+-	if (kind < 0) {
+-		if (x1205_validate_client(client) < 0) {
+-			err = -ENODEV;
+-			goto exit_kfree;
+-		}
+-	}
+-
+-	/* Inform the i2c layer */
+-	if ((err = i2c_attach_client(client)))
+-		goto exit_kfree;
+-
+ 	dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
+ 
+ 	rtc = rtc_device_register(x1205_driver.driver.name, &client->dev,
+ 				&x1205_rtc_ops, THIS_MODULE);
+ 
+-	if (IS_ERR(rtc)) {
+-		err = PTR_ERR(rtc);
+-		goto exit_detach;
+-	}
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+ 
+ 	i2c_set_clientdata(client, rtc);
+ 
+@@ -565,45 +533,35 @@
+ 	else
+ 		dev_err(&client->dev, "couldn't read status\n");
+ 
+-	err = device_create_file(&client->dev, &dev_attr_atrim);
+-	if (err) goto exit_devreg;
+-	err = device_create_file(&client->dev, &dev_attr_dtrim);
+-	if (err) goto exit_atrim;
+	err = x1205_sysfs_register(&client->dev);
+	if (err)
+		goto exit_devreg;
+ 
+ 	return 0;
+ 
+-exit_atrim:
+-	device_remove_file(&client->dev, &dev_attr_atrim);
+-
+ exit_devreg:
+ 	rtc_device_unregister(rtc);
+ 
+-exit_detach:
+-	i2c_detach_client(client);
+-
+-exit_kfree:
+-	kfree(client);
+-
+-exit:
+ 	return err;
+ }
+ 
+-static int x1205_detach(struct i2c_client *client)
+static int x1205_remove(struct i2c_client *client)
+ {
+-	int err;
+ 	struct rtc_device *rtc = i2c_get_clientdata(client);
+ 
+- 	if (rtc)
+-		rtc_device_unregister(rtc);
+-
+-	if ((err = i2c_detach_client(client)))
+-		return err;
+-
+-	kfree(client);
+-
+	rtc_device_unregister(rtc);
+	x1205_sysfs_unregister(&client->dev);
+ 	return 0;
+ }
+ 
+static struct i2c_driver x1205_driver = {
+	.driver		= {
+		.name	= "rtc-x1205",
+	},
+	.probe		= x1205_probe,
+	.remove		= x1205_remove,
+};
+
+ static int __init x1205_init(void)
+ {
+ 	return i2c_add_driver(&x1205_driver);
--- a/target/linux/ixp4xx/patches-2.6.25/030-ixp4xx_fsg_board_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/030-ixp4xx_fsg_board_support.patch
@ -0,0 +1,581 @@
+From: Rod Whitby <rod@whitby.id.au>
+Subject: [PATCH] ixp4xx: Add support for the Freecom FSG-3 board (Patch #4874)
+
+The Freecom-FSG3 is a small network-attached-storage device with the
+following feature set:
+
+* Intel IXP422
+* 4MB Flash (ixp4xx flash driver)
+* 64MB RAM
+* 4 USB 2.0 host ports (ehci and ohci drivers)
+* 1 WAN (eth1) and 3 LAN (eth0) ethernet ports
+  * Supported by the open source ixp4xx ethernet driver
+* Via VT6421 disk controller (libata and sata-via drivers)
+  * Internal hard disk (PATA supported, SATA not yet supported)
+  * External SATA port (not yet supported)
+* ISL1208 RTC chip
+* Winbond 83782 temp sensor and fan controller
+* MiniPCI slot
+
+The ixp4xx_defconfig is also updated to support this device (the
+leds-fsg driver is to be submitted separately via the leds tree after
+this initial support is merged, as it depends on header gpio defines).
+
+Signed-off-by: Rod Whitby <rod@whitby.id.au>
+
+PATCH FOLLOWS
+KernelVersion: v2.6.25-rc6-74-g264e3e8
+---
+
+Updated to correct all issues found by RMK.
+
+The front power button calls ctrl_alt_del() and the rear reset button
+now calls machine_restart() directly.
+
+ arch/arm/configs/ixp4xx_defconfig      |    9 +-
+ arch/arm/mach-ixp4xx/Kconfig           |    9 +
+ arch/arm/mach-ixp4xx/Makefile          |    2 +
+ arch/arm/mach-ixp4xx/fsg-pci.c         |   71 ++++++++
+ arch/arm/mach-ixp4xx/fsg-setup.c       |  276 ++++++++++++++++++++++++++++++++
+ include/asm-arm/arch-ixp4xx/fsg.h      |   50 ++++++
+ include/asm-arm/arch-ixp4xx/hardware.h |    1 +
+ include/asm-arm/arch-ixp4xx/irqs.h     |    7 +
+ 8 files changed, 421 insertions(+), 4 deletions(-)
+ create mode 100644 arch/arm/mach-ixp4xx/fsg-pci.c
+ create mode 100644 arch/arm/mach-ixp4xx/fsg-setup.c
+ create mode 100644 include/asm-arm/arch-ixp4xx/fsg.h
+
+diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
+index efa0485..fc14932 100644
+--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
+@@ -165,6 +165,7 @@ CONFIG_ARCH_PRPMC1100=y
+ CONFIG_MACH_NAS100D=y
+ CONFIG_MACH_DSMG600=y
+ CONFIG_ARCH_IXDP4XX=y
+CONFIG_MACH_FSG=y
+ CONFIG_CPU_IXP46X=y
+ CONFIG_CPU_IXP43X=y
+ CONFIG_MACH_GTWX5715=y
+@@ -770,7 +771,7 @@ CONFIG_ATA=y
+ # CONFIG_SATA_SIL24 is not set
+ # CONFIG_SATA_SIS is not set
+ # CONFIG_SATA_ULI is not set
+-# CONFIG_SATA_VIA is not set
+CONFIG_SATA_VIA=y
+ # CONFIG_SATA_VITESSE is not set
+ # CONFIG_SATA_INIC162X is not set
+ # CONFIG_PATA_ALI is not set
+@@ -1143,7 +1144,7 @@ CONFIG_HWMON=y
+ # CONFIG_SENSORS_VIA686A is not set
+ # CONFIG_SENSORS_VT1211 is not set
+ # CONFIG_SENSORS_VT8231 is not set
+-# CONFIG_SENSORS_W83781D is not set
+CONFIG_SENSORS_W83781D=y
+ # CONFIG_SENSORS_W83791D is not set
+ # CONFIG_SENSORS_W83792D is not set
+ # CONFIG_SENSORS_W83793 is not set
+@@ -1334,8 +1335,8 @@ CONFIG_LEDS_CLASS=y
+ #
+ # LED drivers
+ #
+-# CONFIG_LEDS_IXP4XX is not set
+ CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_FSG=y
+ 
+ #
+ # LED Triggers
+@@ -1367,7 +1368,7 @@ CONFIG_RTC_INTF_DEV=y
+ # CONFIG_RTC_DRV_DS1672 is not set
+ # CONFIG_RTC_DRV_MAX6900 is not set
+ # CONFIG_RTC_DRV_RS5C372 is not set
+-# CONFIG_RTC_DRV_ISL1208 is not set
+CONFIG_RTC_DRV_ISL1208=y
+ CONFIG_RTC_DRV_X1205=y
+ CONFIG_RTC_DRV_PCF8563=y
+ # CONFIG_RTC_DRV_PCF8583 is not set
+diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
+index e774447..db8b5fe 100644
+--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -125,6 +125,15 @@ config	ARCH_IXDP4XX
+ 	depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
+ 	default y
+ 
+config MACH_FSG
+	bool
+	prompt "Freecom FSG-3"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support Freecom's
+	  FSG-3 device. For more information on this platform,
+	  see http://www.nslu2-linux.org/wiki/FSG3/HomePage
+
+ #
+ # Certain registers and IRQs are only enabled if supporting IXP465 CPUs
+ #
+diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
+index c195688..2e6bbf9 100644
+--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NAS100D)		+= nas100d-pci.o
+ obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o
+ obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
+ obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
+obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -28,6 +29,7 @@ obj-$(CONFIG_MACH_NAS100D)	+= nas100d-setup.o
+ obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
+ obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
+ obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
+obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c
+new file mode 100644
+index 0000000..f19f3f6
+--- /dev/null
+++ b/arch/arm/mach-ixp4xx/fsg-pci.c
+@@ -0,0 +1,71 @@
+/*
+ * arch/arch/mach-ixp4xx/fsg-pci.c
+ *
+ * FSG board-level PCI initialization
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Maintainer: http://www.nslu2-linux.org/
+ *
+ * based on ixdp425-pci.c:
+ *	Copyright (C) 2002 Intel Corporation.
+ *	Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+
+void __init fsg_pci_preinit(void)
+{
+	set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW);
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static int pci_irq_table[FSG_PCI_IRQ_LINES] = {
+		IRQ_FSG_PCI_INTC,
+		IRQ_FSG_PCI_INTB,
+		IRQ_FSG_PCI_INTA,
+	};
+
+	int irq = -1;
+	slot = slot - 11;
+
+	if (slot >= 1 && slot <= FSG_PCI_MAX_DEV &&
+	    pin >= 1 && pin <= FSG_PCI_IRQ_LINES)
+		irq = pci_irq_table[(slot - 1)];
+	printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n",
+	       __func__, slot, pin, irq);
+
+	return irq;
+}
+
+struct hw_pci fsg_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit =	  fsg_pci_preinit,
+	.swizzle =	  pci_std_swizzle,
+	.setup =	  ixp4xx_setup,
+	.scan =		  ixp4xx_scan_bus,
+	.map_irq =	  fsg_map_irq,
+};
+
+int __init fsg_pci_init(void)
+{
+	if (machine_is_fsg())
+		pci_common_init(&fsg_pci);
+	return 0;
+}
+
+subsys_initcall(fsg_pci_init);
+diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
+new file mode 100644
+index 0000000..0db3a90
+--- /dev/null
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
+@@ -0,0 +1,276 @@
+/*
+ * arch/arm/mach-ixp4xx/fsg-setup.c
+ *
+ * FSG board-setup
+ *
+ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
+ *
+ * based on ixdp425-setup.c:
+ *	Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * based on nslu2-power.c
+ *	Copyright (C) 2005 Tower Technologies
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ */
+
+#include <linux/if_ether.h>
+#include <linux/irq.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/leds.h>
+#include <linux/reboot.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+static struct flash_platform_data fsg_flash_data = {
+	.map_name		= "cfi_probe",
+	.width			= 2,
+};
+
+static struct resource fsg_flash_resource = {
+	.flags			= IORESOURCE_MEM,
+};
+
+static struct platform_device fsg_flash = {
+	.name			= "IXP4XX-Flash",
+	.id			= 0,
+	.dev = {
+		.platform_data	= &fsg_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &fsg_flash_resource,
+};
+
+static struct i2c_gpio_platform_data fsg_i2c_gpio_data = {
+	.sda_pin		= FSG_SDA_PIN,
+	.scl_pin		= FSG_SCL_PIN,
+};
+
+static struct platform_device fsg_i2c_gpio = {
+	.name			= "i2c-gpio",
+	.id			= 0,
+	.dev = {
+		.platform_data	= &fsg_i2c_gpio_data,
+	},
+};
+
+static struct i2c_board_info __initdata fsg_i2c_board_info [] = {
+	{
+		I2C_BOARD_INFO("rtc-isl1208", 0x6f),
+	},
+};
+
+static struct resource fsg_uart_resources[] = {
+	{
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct plat_serial8250_port fsg_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ }
+};
+
+static struct platform_device fsg_uart = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev = {
+		.platform_data	= fsg_uart_data,
+	},
+	.num_resources		= ARRAY_SIZE(fsg_uart_resources),
+	.resource		= fsg_uart_resources,
+};
+
+static struct platform_device fsg_leds = {
+	.name		= "fsg-led",
+	.id		= -1,
+};
+
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info fsg_plat_eth[] = {
+	{
+		.phy		= 5,
+		.rxq		= 3,
+		.txreadyq	= 20,
+	}, {
+		.phy		= 4,
+		.rxq		= 4,
+		.txreadyq	= 21,
+	}
+};
+
+static struct platform_device fsg_eth[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev = {
+			.platform_data	= fsg_plat_eth,
+		},
+	}, {
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEC,
+		.dev = {
+			.platform_data	= fsg_plat_eth + 1,
+		},
+	}
+};
+
+static struct platform_device *fsg_devices[] __initdata = {
+	&fsg_i2c_gpio,
+	&fsg_flash,
+	&fsg_leds,
+	&fsg_eth[0],
+	&fsg_eth[1],
+};
+
+static irqreturn_t fsg_power_handler(int irq, void *dev_id)
+{
+	/* Signal init to do the ctrlaltdel action, this will bypass init if
+	 * it hasn't started and do a kernel_restart.
+	 */
+	ctrl_alt_del();
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t fsg_reset_handler(int irq, void *dev_id)
+{
+	/* This is the paper-clip reset which does an emergency reboot. */
+	printk(KERN_INFO "Restarting system.\n");
+	machine_restart(NULL);
+
+	/* This should never be reached. */
+	return IRQ_HANDLED;
+}
+
+static void __init fsg_init(void)
+{
+	DECLARE_MAC_BUF(mac_buf);
+	uint8_t __iomem *f;
+	int i;
+
+	ixp4xx_sys_init();
+
+	fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	fsg_flash_resource.end =
+		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+	/* Configure CS2 for operation, 8bit and writable */
+	*IXP4XX_EXP_CS2 = 0xbfff0002;
+
+	i2c_register_board_info(0, fsg_i2c_board_info,
+				ARRAY_SIZE(fsg_i2c_board_info));
+
+	/* This is only useful on a modified machine, but it is valuable
+	 * to have it first in order to see debug messages, and so that
+	 * it does *not* get removed if platform_add_devices fails!
+	 */
+	(void)platform_device_register(&fsg_uart);
+
+	platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));
+
+	if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler,
+			IRQF_DISABLED | IRQF_TRIGGER_LOW,
+			"FSG reset button", NULL) < 0) {
+
+		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+			gpio_to_irq(FSG_RB_GPIO));
+	}
+
+	if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler,
+			IRQF_DISABLED | IRQF_TRIGGER_LOW,
+			"FSG power button", NULL) < 0) {
+
+		printk(KERN_DEBUG "Power Button IRQ %d not available\n",
+			gpio_to_irq(FSG_SB_GPIO));
+	}
+
+	/*
+	 * Map in a portion of the flash and read the MAC addresses.
+	 * Since it is stored in BE in the flash itself, we need to
+	 * byteswap it if we're in LE mode.
+	 */
+	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000);
+	if (f) {
+#ifdef __ARMEB__
+		for (i = 0; i < 6; i++) {
+			fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
+			fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
+		}
+#else
+
+		/*
+		  Endian-swapped reads from unaligned addresses are
+		  required to extract the two MACs from the big-endian
+		  Redboot config area in flash.
+		*/
+
+		fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0421);
+		fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0420);
+		fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0427);
+		fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0426);
+		fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0425);
+		fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0424);
+
+		fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0439);
+		fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C043F);
+		fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C043E);
+		fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C043D);
+		fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C043C);
+		fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0443);
+#endif
+		iounmap(f);
+	}
+	printk(KERN_INFO "FSG: Using MAC address %s for port 0\n",
+	       print_mac(mac_buf, fsg_plat_eth[0].hwaddr));
+	printk(KERN_INFO "FSG: Using MAC address %s for port 1\n",
+	       print_mac(mac_buf, fsg_plat_eth[1].hwaddr));
+
+}
+
+MACHINE_START(FSG, "Freecom FSG-3")
+	/* Maintainer: www.nslu2-linux.org */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= fsg_init,
+MACHINE_END
+
+diff --git a/include/asm-arm/arch-ixp4xx/fsg.h b/include/asm-arm/arch-ixp4xx/fsg.h
+new file mode 100644
+index 0000000..c0100cc
+--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/fsg.h
+@@ -0,0 +1,50 @@
+/*
+ * include/asm-arm/arch-ixp4xx/fsg.h
+ *
+ * Freecom FSG-3 platform specific definitions
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Author: Tomasz Chmielewski <mangoo@wpkg.org>
+ * Maintainers: http://www.nslu2-linux.org
+ *
+ * Based on coyote.h by
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
+#define FSG_SDA_PIN		12
+#define FSG_SCL_PIN		13
+
+/*
+ * FSG PCI IRQs
+ */
+#define FSG_PCI_MAX_DEV		3
+#define FSG_PCI_IRQ_LINES	3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define FSG_PCI_INTA_PIN	6
+#define FSG_PCI_INTB_PIN	7
+#define FSG_PCI_INTC_PIN	5
+
+/* Buttons */
+
+#define FSG_SB_GPIO		4	/* sync button */
+#define FSG_RB_GPIO		9	/* reset button */
+#define FSG_UB_GPIO		10	/* usb button */
+
+/* LEDs */
+
+#define FSG_LED_WLAN_BIT	0
+#define FSG_LED_WAN_BIT		1
+#define FSG_LED_SATA_BIT	2
+#define FSG_LED_USB_BIT		4
+#define FSG_LED_RING_BIT	5
+#define FSG_LED_SYNC_BIT	7
+diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h
+index 73e8dc3..fa723a6 100644
+--- a/include/asm-arm/arch-ixp4xx/hardware.h
+++ b/include/asm-arm/arch-ixp4xx/hardware.h
+@@ -45,5 +45,6 @@
+ #include "nslu2.h"
+ #include "nas100d.h"
+ #include "dsmg600.h"
+#include "fsg.h"
+ 
+ #endif  /* _ASM_ARCH_HARDWARE_H */
+diff --git a/include/asm-arm/arch-ixp4xx/irqs.h b/include/asm-arm/arch-ixp4xx/irqs.h
+index 1180160..674af4a 100644
+--- a/include/asm-arm/arch-ixp4xx/irqs.h
+++ b/include/asm-arm/arch-ixp4xx/irqs.h
+@@ -128,4 +128,11 @@
+ #define        IRQ_DSMG600_PCI_INTE    IRQ_IXP4XX_GPIO7
+ #define        IRQ_DSMG600_PCI_INTF    IRQ_IXP4XX_GPIO6
+ 
+/*
+ * Freecom FSG-3 Board IRQs
+ */
+#define        IRQ_FSG_PCI_INTA        IRQ_IXP4XX_GPIO6
+#define        IRQ_FSG_PCI_INTB        IRQ_IXP4XX_GPIO7
+#define        IRQ_FSG_PCI_INTC        IRQ_IXP4XX_GPIO5
+
+ #endif
+-- 
+1.5.2.5
+
--- a/target/linux/ixp4xx/patches-2.6.25/031-ixp4xx_fsg_led_driver.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/031-ixp4xx_fsg_led_driver.patch
@ -0,0 +1,319 @@
+From a66e34fefb3f8142d7f16808563eb610225f6e77 Mon Sep 17 00:00:00 2001
+From: Rod Whitby <rod@whitby.id.au>
+Date: Tue, 29 Jan 2008 23:17:42 +1030
+Subject: [PATCH] leds: Add new driver for the LEDs on the Freecom FSG-3
+
+The LEDs on the Freecom FSG-3 are connected to an external
+memory-mapped latch on the ixp4xx expansion bus, and therefore cannot
+be supported by any of the existing LEDs drivers.
+
+Signed-off-by: Rod Whitby <rod@whitby.id.au>
+--
+PATCH FOLLOWS
+KernelVersion: v2.6.25-rc6-117-g457fb60
+---
+ drivers/leds/Kconfig    |    6 +
+ drivers/leds/Makefile   |    1 +
+ drivers/leds/leds-fsg.c |  261 +++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 268 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/leds/leds-fsg.c
+
+diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
+index 859814f..aefbe04 100644
+--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
+@@ -46,6 +46,12 @@ config LEDS_SPITZ
+ 	  This option enables support for the LEDs on Sharp Zaurus
+ 	  SL-Cxx00 series (C1000, C3000, C3100).
+ 
+config LEDS_FSG
+	tristate "LED Support for the Freecom FSG-3"
+	depends on LEDS_CLASS && MACH_FSG
+	help
+	  This option enables support for the LEDs on the Freecom FSG-3.
+
+ config LEDS_TOSA
+ 	tristate "LED Support for the Sharp SL-6000 series"
+ 	depends on LEDS_CLASS && PXA_SHARPSL
+diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
+index 84ced3b..b17bd91 100644
+--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
+@@ -21,6 +21,7 @@ obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
+ obj-$(CONFIG_LEDS_CM_X270)              += leds-cm-x270.o
+ obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
+ obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
+obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
+ 
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
+diff --git a/drivers/leds/leds-fsg.c b/drivers/leds/leds-fsg.c
+new file mode 100644
+index 0000000..a7421b8
+--- /dev/null
+++ b/drivers/leds/leds-fsg.c
+@@ -0,0 +1,261 @@
+/*
+ * LED Driver for the Freecom FSG-3
+ *
+ * Copyright (c) 2008 Rod Whitby <rod@whitby.id.au>
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ *
+ * Based on leds-spitz.c
+ * Copyright 2005-2006 Openedhand Ltd.
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+
+static short __iomem *latch_address;
+static unsigned short latch_value;
+
+
+static void fsg_led_wlan_set(struct led_classdev *led_cdev,
+			     enum led_brightness value)
+{
+	if (value) {
+		latch_value &= ~(1 << FSG_LED_WLAN_BIT);
+		*latch_address = latch_value;
+	} else {
+		latch_value |=  (1 << FSG_LED_WLAN_BIT);
+		*latch_address = latch_value;
+	}
+}
+
+static void fsg_led_wan_set(struct led_classdev *led_cdev,
+			    enum led_brightness value)
+{
+	if (value) {
+		latch_value &= ~(1 << FSG_LED_WAN_BIT);
+		*latch_address = latch_value;
+	} else {
+		latch_value |=  (1 << FSG_LED_WAN_BIT);
+		*latch_address = latch_value;
+	}
+}
+
+static void fsg_led_sata_set(struct led_classdev *led_cdev,
+			     enum led_brightness value)
+{
+	if (value) {
+		latch_value &= ~(1 << FSG_LED_SATA_BIT);
+		*latch_address = latch_value;
+	} else {
+		latch_value |=  (1 << FSG_LED_SATA_BIT);
+		*latch_address = latch_value;
+	}
+}
+
+static void fsg_led_usb_set(struct led_classdev *led_cdev,
+			    enum led_brightness value)
+{
+	if (value) {
+		latch_value &= ~(1 << FSG_LED_USB_BIT);
+		*latch_address = latch_value;
+	} else {
+		latch_value |=  (1 << FSG_LED_USB_BIT);
+		*latch_address = latch_value;
+	}
+}
+
+static void fsg_led_sync_set(struct led_classdev *led_cdev,
+			     enum led_brightness value)
+{
+	if (value) {
+		latch_value &= ~(1 << FSG_LED_SYNC_BIT);
+		*latch_address = latch_value;
+	} else {
+		latch_value |=  (1 << FSG_LED_SYNC_BIT);
+		*latch_address = latch_value;
+	}
+}
+
+static void fsg_led_ring_set(struct led_classdev *led_cdev,
+			     enum led_brightness value)
+{
+	if (value) {
+		latch_value &= ~(1 << FSG_LED_RING_BIT);
+		*latch_address = latch_value;
+	} else {
+		latch_value |=  (1 << FSG_LED_RING_BIT);
+		*latch_address = latch_value;
+	}
+}
+
+
+
+static struct led_classdev fsg_wlan_led = {
+	.name			= "fsg:blue:wlan",
+	.brightness_set		= fsg_led_wlan_set,
+};
+
+static struct led_classdev fsg_wan_led = {
+	.name			= "fsg:blue:wan",
+	.brightness_set		= fsg_led_wan_set,
+};
+
+static struct led_classdev fsg_sata_led = {
+	.name			= "fsg:blue:sata",
+	.brightness_set		= fsg_led_sata_set,
+};
+
+static struct led_classdev fsg_usb_led = {
+	.name			= "fsg:blue:usb",
+	.brightness_set		= fsg_led_usb_set,
+};
+
+static struct led_classdev fsg_sync_led = {
+	.name			= "fsg:blue:sync",
+	.brightness_set		= fsg_led_sync_set,
+};
+
+static struct led_classdev fsg_ring_led = {
+	.name			= "fsg:blue:ring",
+	.brightness_set		= fsg_led_ring_set,
+};
+
+
+
+#ifdef CONFIG_PM
+static int fsg_led_suspend(struct platform_device *dev, pm_message_t state)
+{
+	led_classdev_suspend(&fsg_wlan_led);
+	led_classdev_suspend(&fsg_wan_led);
+	led_classdev_suspend(&fsg_sata_led);
+	led_classdev_suspend(&fsg_usb_led);
+	led_classdev_suspend(&fsg_sync_led);
+	led_classdev_suspend(&fsg_ring_led);
+	return 0;
+}
+
+static int fsg_led_resume(struct platform_device *dev)
+{
+	led_classdev_resume(&fsg_wlan_led);
+	led_classdev_resume(&fsg_wan_led);
+	led_classdev_resume(&fsg_sata_led);
+	led_classdev_resume(&fsg_usb_led);
+	led_classdev_resume(&fsg_sync_led);
+	led_classdev_resume(&fsg_ring_led);
+	return 0;
+}
+#endif
+
+
+static int fsg_led_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = led_classdev_register(&pdev->dev, &fsg_wlan_led);
+	if (ret < 0)
+		goto failwlan;
+
+	ret = led_classdev_register(&pdev->dev, &fsg_wan_led);
+	if (ret < 0)
+		goto failwan;
+
+	ret = led_classdev_register(&pdev->dev, &fsg_sata_led);
+	if (ret < 0)
+		goto failsata;
+
+	ret = led_classdev_register(&pdev->dev, &fsg_usb_led);
+	if (ret < 0)
+		goto failusb;
+
+	ret = led_classdev_register(&pdev->dev, &fsg_sync_led);
+	if (ret < 0)
+		goto failsync;
+
+	ret = led_classdev_register(&pdev->dev, &fsg_ring_led);
+	if (ret < 0)
+		goto failring;
+
+	/* Map the LED chip select address space */
+	latch_address = (unsigned short *) ioremap(IXP4XX_EXP_BUS_BASE(2), 512);
+	if (!latch_address) {
+		ret = -ENOMEM;
+		goto failremap;
+	}
+
+	latch_value = 0xffff;
+	*latch_address = latch_value;
+
+	return ret;
+
+ failremap:
+	led_classdev_unregister(&fsg_ring_led);
+ failring:
+	led_classdev_unregister(&fsg_sync_led);
+ failsync:
+	led_classdev_unregister(&fsg_usb_led);
+ failusb:
+	led_classdev_unregister(&fsg_sata_led);
+ failsata:
+	led_classdev_unregister(&fsg_wan_led);
+ failwan:
+	led_classdev_unregister(&fsg_wlan_led);
+ failwlan:
+
+	return ret;
+}
+
+static int fsg_led_remove(struct platform_device *pdev)
+{
+	iounmap(latch_address);
+
+	led_classdev_unregister(&fsg_wlan_led);
+	led_classdev_unregister(&fsg_wan_led);
+	led_classdev_unregister(&fsg_sata_led);
+	led_classdev_unregister(&fsg_usb_led);
+	led_classdev_unregister(&fsg_sync_led);
+	led_classdev_unregister(&fsg_ring_led);
+
+	return 0;
+}
+
+
+static struct platform_driver fsg_led_driver = {
+	.probe		= fsg_led_probe,
+	.remove		= fsg_led_remove,
+#ifdef CONFIG_PM
+	.suspend	= fsg_led_suspend,
+	.resume		= fsg_led_resume,
+#endif
+	.driver		= {
+		.name		= "fsg-led",
+	},
+};
+
+
+static int __init fsg_led_init(void)
+{
+	return platform_driver_register(&fsg_led_driver);
+}
+
+static void __exit fsg_led_exit(void)
+{
+	platform_driver_unregister(&fsg_led_driver);
+}
+
+
+module_init(fsg_led_init);
+module_exit(fsg_led_exit);
+
+MODULE_AUTHOR("Rod Whitby <rod@whitby.id.au>");
+MODULE_DESCRIPTION("Freecom FSG-3 LED driver");
+MODULE_LICENSE("GPL");
+-- 
+1.5.2.5
+
--- a/target/linux/ixp4xx/patches-2.6.25/090-increase_entropy_pools.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/090-increase_entropy_pools.patch
@ -0,0 +1,17 @@
+Index: linux-2.6.19/drivers/char/random.c
+===================================================================
+--- linux-2.6.19.orig/drivers/char/random.c
+++ linux-2.6.19/drivers/char/random.c
+@@ -248,9 +248,9 @@
+ /*
+  * Configuration information
+  */
+-#define INPUT_POOL_WORDS 128
+-#define OUTPUT_POOL_WORDS 32
+-#define SEC_XFER_SIZE 512
+#define INPUT_POOL_WORDS 256
+#define OUTPUT_POOL_WORDS 64
+#define SEC_XFER_SIZE 1024
+ 
+ /*
+  * The minimum number of bits of entropy before we wake up a read on
--- a/target/linux/ixp4xx/patches-2.6.25/100-gateway7001_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/100-gateway7001_mac_plat_info.patch
@ -0,0 +1,41 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/gateway7001-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/gateway7001-setup.c	2007-10-09 22:31:38.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c	2007-10-22 15:09:33.000000000 +0200
+@@ -76,9 +76,36 @@
+ 	.resource	= &gateway7001_uart_resource,
+ };
+ 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info gateway7001_plat_eth[] = {
+        {
+                .phy            = 1,
+                .rxq            = 3,
+		.txreadyq	= 20,
+        }, {
+                .phy            = 2,
+                .rxq            = 4,
+		.txreadyq	= 21,
+	}
+};
+
+static struct platform_device gateway7001_eth[] = {
+        {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEB,
+                .dev.platform_data      = gateway7001_plat_eth,
+        }, {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEC,
+                .dev.platform_data      = gateway7001_plat_eth + 1,
+	}
+};
+
+ static struct platform_device *gateway7001_devices[] __initdata = {
+ 	&gateway7001_flash,
+-	&gateway7001_uart
+	&gateway7001_uart,
+	&gateway7001_eth[0],
+	&gateway7001_eth[1],
+ };
+ 
+ static void __init gateway7001_init(void)
--- a/target/linux/ixp4xx/patches-2.6.25/101-wg302_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/101-wg302_mac_plat_info.patch
@ -0,0 +1,31 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/wg302v2-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/wg302v2-setup.c	2007-10-09 22:31:38.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c	2007-10-22 15:02:20.000000000 +0200
+@@ -77,9 +77,27 @@
+ 	.resource	= &wg302v2_uart_resource,
+ };
+ 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info wg302_plat_eth[] = {
+	{
+		.phy		= 8,
+		.rxq		= 3,
+		.txreadyq	= 20,
+	}
+};
+
+static struct platform_device wg302_eth[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= wg302_plat_eth,
+	}
+};
+
+ static struct platform_device *wg302v2_devices[] __initdata = {
+ 	&wg302v2_flash,
+ 	&wg302v2_uart,
+	&wg302_eth[0],
+ };
+ 
+ static void __init wg302v2_init(void)
--- a/target/linux/ixp4xx/patches-2.6.25/110-pronghorn_metro_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/110-pronghorn_metro_support.patch
@ -0,0 +1,297 @@
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Kconfig	2008-03-12 21:21:23.000000000 +1030
+++ linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig	2008-03-12 21:21:26.000000000 +1030
+@@ -57,6 +57,14 @@
+ 	  WG302 v2 or WAG302 v2 Access Points. For more information
+ 	  on this platform, see http://openwrt.org
+ 
+config MACH_PRONGHORNMETRO
+	bool "Pronghorn Metro"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support the ADI 
+	  Engineering Pronghorn Metro Platform. For more
+	  information on this platform, see <file:Documentation/arm/IXP4xx>.
+
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Makefile
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Makefile	2008-03-12 21:21:23.000000000 +1030
+++ linux-2.6.24/arch/arm/mach-ixp4xx/Makefile	2008-03-12 21:21:26.000000000 +1030
+@@ -16,6 +16,7 @@
+ obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
+ obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
+ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -30,5 +31,6 @@
+ obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
+ obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
+ obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+obj-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.24/arch/arm/mach-ixp4xx/pronghornmetro-pci.c	2008-03-12 21:21:26.000000000 +1030
+@@ -0,0 +1,74 @@
+/*
+ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
+ *
+ * PCI setup routines for ADI Engineering Pronghorn Metro
+ *
+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-pci.c:
+ *	Copyright (C) 2002 Jungo Software Technologies.
+ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
+ *
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/pci.h>
+
+extern void ixp4xx_pci_preinit(void);
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
+
+void __init pronghornmetro_pci_preinit(void)
+{
+	set_irq_type(IRQ_IXP4XX_GPIO4, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO1, IRQT_LOW);
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init pronghornmetro_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (slot == 13)
+		return IRQ_IXP4XX_GPIO4;
+	else if (slot == 14)
+		return IRQ_IXP4XX_GPIO6;
+	else if (slot == 15)
+		return IRQ_IXP4XX_GPIO11;
+	else if (slot == 16)
+		return IRQ_IXP4XX_GPIO1;
+	else return -1;
+}
+
+struct hw_pci pronghornmetro_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit =        pronghornmetro_pci_preinit,
+	.swizzle =        pci_std_swizzle,
+	.setup =          ixp4xx_setup,
+	.scan =           ixp4xx_scan_bus,
+	.map_irq =        pronghornmetro_map_irq,
+};
+
+int __init pronghornmetro_pci_init(void)
+{
+	if (machine_is_pronghorn_metro())
+		pci_common_init(&pronghornmetro_pci);
+	return 0;
+}
+
+subsys_initcall(pronghornmetro_pci_init);
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.24/arch/arm/mach-ixp4xx/pronghornmetro-setup.c	2008-03-12 21:21:26.000000000 +1030
+@@ -0,0 +1,147 @@
+/*
+ * arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+ *
+ * Board setup for the ADI Engineering Pronghorn Metro
+ *
+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
+ *
+ * based on coyote-setup.c:
+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <Kaloz@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data pronghornmetro_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource pronghornmetro_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device pronghornmetro_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &pronghornmetro_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &pronghornmetro_flash_resource,
+};
+
+static struct resource pronghornmetro_uart_resource = {
+	.start	= IXP4XX_UART2_BASE_PHYS,
+	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct plat_serial8250_port pronghornmetro_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device pronghornmetro_uart = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= pronghornmetro_uart_data,
+	},
+	.num_resources	= 1,
+	.resource	= &pronghornmetro_uart_resource,
+};
+
+static struct resource pronghornmetro_pata_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM
+	},
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "intrq",
+		.start	= IRQ_IXP4XX_GPIO0,
+		.end	= IRQ_IXP4XX_GPIO0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct ixp4xx_pata_data pronghornmetro_pata_data = {
+	.cs0_bits	= 0xbfff0043,
+	.cs1_bits	= 0xbfff0043,
+};
+
+static struct platform_device pronghornmetro_pata = {
+	.name			= "pata_ixp4xx_cf",
+	.id			= 0,
+	.dev.platform_data      = &pronghornmetro_pata_data,
+	.num_resources		= ARRAY_SIZE(pronghornmetro_pata_resources),
+	.resource		= pronghornmetro_pata_resources,
+};
+
+static struct platform_device *pronghornmetro_devices[] __initdata = {
+	&pronghornmetro_flash,
+	&pronghornmetro_uart,
+};
+
+static void __init pronghornmetro_init(void)
+{
+	ixp4xx_sys_init();
+
+	pronghornmetro_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	pronghornmetro_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
+
+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+	platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices));
+
+	pronghornmetro_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
+	pronghornmetro_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
+
+	pronghornmetro_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
+	pronghornmetro_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
+
+	pronghornmetro_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
+	pronghornmetro_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
+
+	platform_device_register(&pronghornmetro_pata);
+}
+
+#ifdef CONFIG_MACH_PRONGHORNMETRO
+MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= pronghornmetro_init,
+MACHINE_END
+#endif
+Index: linux-2.6.24/Documentation/arm/IXP4xx
+===================================================================
+--- linux-2.6.24.orig/Documentation/arm/IXP4xx	2008-03-12 21:20:48.000000000 +1030
+++ linux-2.6.24/Documentation/arm/IXP4xx	2008-03-12 21:21:26.000000000 +1030
+@@ -111,6 +111,9 @@
+    the platform has two mini-PCI slots used for 802.11[bga] cards.
+    Finally, there is an IDE port hanging off the expansion bus.
+ 
+ADI Engineering Pronghorn Metro Platform
+http://www.adiengineering.com/php-bin/ecomm4/productDisplay.php?category_id=30&product_id=85
+
+ Gateworks Avila Network Platform
+ http://www.gateworks.com/avila_sbc.htm
+ 
+Index: linux-2.6.24/include/asm-arm/arch-ixp4xx/uncompress.h
+===================================================================
+--- linux-2.6.24.orig/include/asm-arm/arch-ixp4xx/uncompress.h	2008-03-12 21:20:48.000000000 +1030
+++ linux-2.6.24/include/asm-arm/arch-ixp4xx/uncompress.h	2008-03-12 21:21:26.000000000 +1030
+@@ -41,7 +41,8 @@
+ 	 * Some boards are using UART2 as console
+ 	 */
+ 	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
+-			 machine_is_gateway7001() || machine_is_wg302v2())
+			 machine_is_gateway7001() || machine_is_wg302v2() ||
+			 machine_is_pronghorn_metro())
+ 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ 	else
+ 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
--- a/target/linux/ixp4xx/patches-2.6.25/111-pronghorn_metro_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/111-pronghorn_metro_mac_plat_info.patch
@ -0,0 +1,40 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/pronghornmetro-setup.c	2007-10-22 15:41:27.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c	2007-10-22 15:43:30.000000000 +0200
+@@ -104,9 +104,36 @@
+ 	.resource		= pronghornmetro_pata_resources,
+ };
+ 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info pronghornmetro_plat_eth[] = {
+        {
+                .phy            = 0,
+                .rxq            = 3,
+		.txreadyq	= 20,
+        }, {
+                .phy            = 1,
+                .rxq            = 4,
+		.txreadyq	= 21,
+	}
+};
+
+static struct platform_device pronghornmetro_eth[] = {
+        {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEB,
+                .dev.platform_data      = pronghornmetro_plat_eth,
+        }, {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEC,
+                .dev.platform_data      = pronghornmetro_plat_eth + 1,
+	}
+};
+
+ static struct platform_device *pronghornmetro_devices[] __initdata = {
+ 	&pronghornmetro_flash,
+ 	&pronghornmetro_uart,
+	&pronghornmetro_eth[0],
+	&pronghornmetro_eth[1],
+ };
+ 
+ static void __init pronghornmetro_init(void)
--- a/target/linux/ixp4xx/patches-2.6.25/120-compex_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/120-compex_support.patch
@ -0,0 +1,189 @@
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Kconfig	2008-03-12 21:21:26.000000000 +1030
+++ linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig	2008-03-12 21:21:26.000000000 +1030
+@@ -65,6 +65,14 @@
+ 	  Engineering Pronghorn Metro Platform. For more
+ 	  information on this platform, see <file:Documentation/arm/IXP4xx>.
+ 
+config MACH_COMPEX
+	bool "Compex WP18 / NP18A"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support Compex' 
+	  WP18 or NP18A boards. For more information on this
+	  platform, see http://openwrt.org
+
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Makefile
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Makefile	2008-03-12 21:21:26.000000000 +1030
+++ linux-2.6.24/arch/arm/mach-ixp4xx/Makefile	2008-03-12 21:21:26.000000000 +1030
+@@ -17,6 +17,7 @@
+ obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
+ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-pci.o
+obj-pci-$(CONFIG_MACH_COMPEX)		+= ixdp425-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -32,5 +33,6 @@
+ obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
+ obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+ obj-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-setup.o
+obj-$(CONFIG_MACH_COMPEX)	+= compex-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/compex-setup.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.24/arch/arm/mach-ixp4xx/compex-setup.c	2008-03-12 21:21:26.000000000 +1030
+@@ -0,0 +1,120 @@
+/*
+ * arch/arm/mach-ixp4xx/compex-setup.c
+ *
+ * Ccompex WP18 / NP18A board-setup
+ *
+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
+ *
+ * based on ixdp425-setup.c:
+ *	Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <Kaloz@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data compex_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource compex_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device compex_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &compex_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &compex_flash_resource,
+};
+
+static struct resource compex_uart_resources[] = {
+	{
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM
+	},
+	{
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM
+	}
+};
+
+static struct plat_serial8250_port compex_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device compex_uart = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev.platform_data	= compex_uart_data,
+	.num_resources		= 2,
+	.resource		= compex_uart_resources,
+};
+
+static struct platform_device *compex_devices[] __initdata = {
+	&compex_flash,
+	&compex_uart
+};
+
+static void __init compex_init(void)
+{
+	ixp4xx_sys_init();
+
+	compex_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	compex_flash_resource.end =
+		IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
+	platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices));
+}
+
+#ifdef CONFIG_MACH_COMPEX
+MACHINE_START(COMPEX, "Compex WP18 / NP18A")
+	/* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= compex_init,
+MACHINE_END
+#endif
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/ixdp425-pci.c
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/ixdp425-pci.c	2008-03-12 21:20:48.000000000 +1030
+++ linux-2.6.24/arch/arm/mach-ixp4xx/ixdp425-pci.c	2008-03-12 21:21:26.000000000 +1030
+@@ -66,7 +66,7 @@
+ int __init ixdp425_pci_init(void)
+ {
+ 	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
+-			machine_is_ixdp465() || machine_is_kixrp435())
+			machine_is_ixdp465() || machine_is_kixrp435() || machine_is_compex())
+ 		pci_common_init(&ixdp425_pci);
+ 	return 0;
+ }
+Index: linux-2.6.24/arch/arm/tools/mach-types
+===================================================================
+--- linux-2.6.24.orig/arch/arm/tools/mach-types	2008-03-12 21:20:48.000000000 +1030
+++ linux-2.6.24/arch/arm/tools/mach-types	2008-03-12 21:21:26.000000000 +1030
+@@ -1278,7 +1278,7 @@
+ smdk6400		MACH_SMDK6400		SMDK6400		1270
+ nokia_n800		MACH_NOKIA_N800		NOKIA_N800		1271
+ greenphone		MACH_GREENPHONE		GREENPHONE		1272
+-compex42x		MACH_COMPEXWP18		COMPEXWP18		1273
+compex			MACH_COMPEX		COMPEX			1273
+ xmate			MACH_XMATE		XMATE			1274
+ energizer		MACH_ENERGIZER		ENERGIZER		1275
+ ime1			MACH_IME1		IME1			1276
--- a/target/linux/ixp4xx/patches-2.6.25/121-compex_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/121-compex_mac_plat_info.patch
@ -0,0 +1,41 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/compex-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c	2007-10-23 18:39:29.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/compex-setup.c	2007-10-23 18:45:34.000000000 +0200
+@@ -90,9 +90,36 @@
+ 	.resource		= compex_uart_resources,
+ };
+ 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info compex_plat_eth[] = {
+	{
+		.phy		= -1,
+		.rxq		= 3,
+		.txreadyq	= 20,
+	}, {
+		.phy		= 3,
+		.rxq		= 4,
+		.txreadyq	= 21,
+	}
+};
+
+static struct platform_device compex_eth[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= compex_plat_eth,
+	}, {
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEC,
+		.dev.platform_data	= compex_plat_eth + 1,
+	}
+};
+
+ static struct platform_device *compex_devices[] __initdata = {
+ 	&compex_flash,
+-	&compex_uart
+	&compex_uart,
+	&compex_eth[0],
+	&compex_eth[1],
+ };
+ 
+ static void __init compex_init(void)
--- a/target/linux/ixp4xx/patches-2.6.25/130-wrt300nv2_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/130-wrt300nv2_support.patch
@ -0,0 +1,234 @@
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Kconfig	2008-03-12 21:21:26.000000000 +1030
+++ linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig	2008-03-12 21:21:27.000000000 +1030
+@@ -73,6 +73,14 @@
+ 	  WP18 or NP18A boards. For more information on this
+ 	  platform, see http://openwrt.org
+ 
+config MACH_WRT300NV2
+	bool "Linksys WRT300N v2"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support Linksys' 
+	  WRT300N v2 router. For more information on this
+	  platform, see http://openwrt.org
+
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Makefile
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Makefile	2008-03-12 21:21:26.000000000 +1030
+++ linux-2.6.24/arch/arm/mach-ixp4xx/Makefile	2008-03-12 21:21:27.000000000 +1030
+@@ -18,6 +18,7 @@
+ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-pci.o
+ obj-pci-$(CONFIG_MACH_COMPEX)		+= ixdp425-pci.o
+obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -34,5 +35,6 @@
+ obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+ obj-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-setup.o
+ obj-$(CONFIG_MACH_COMPEX)	+= compex-setup.o
+obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.24/arch/arm/mach-ixp4xx/wrt300nv2-pci.c	2008-03-12 21:21:27.000000000 +1030
+@@ -0,0 +1,65 @@
+/*
+ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
+ *
+ * PCI setup routines for Linksys WRT300N v2
+ *
+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-pci.c:
+ *	Copyright (C) 2002 Jungo Software Technologies.
+ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
+ *
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/pci.h>
+
+extern void ixp4xx_pci_preinit(void);
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
+
+void __init wrt300nv2_pci_preinit(void)
+{
+	set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init wrt300nv2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (slot == 1)
+		return IRQ_IXP4XX_GPIO8;
+	else return -1;
+}
+
+struct hw_pci wrt300nv2_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit =        wrt300nv2_pci_preinit,
+	.swizzle =        pci_std_swizzle,
+	.setup =          ixp4xx_setup,
+	.scan =           ixp4xx_scan_bus,
+	.map_irq =        wrt300nv2_map_irq,
+};
+
+int __init wrt300nv2_pci_init(void)
+{
+	if (machine_is_wrt300nv2())
+		pci_common_init(&wrt300nv2_pci);
+	return 0;
+}
+
+subsys_initcall(wrt300nv2_pci_init);
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.24/arch/arm/mach-ixp4xx/wrt300nv2-setup.c	2008-03-12 21:21:27.000000000 +1030
+@@ -0,0 +1,108 @@
+/*
+ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+ *
+ * Board setup for the Linksys WRT300N v2
+ *
+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
+ *
+ * based on coyote-setup.c:
+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <Kaloz@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data wrt300nv2_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource wrt300nv2_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device wrt300nv2_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &wrt300nv2_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &wrt300nv2_flash_resource,
+};
+
+static struct resource wrt300nv2_uart_resource = {
+	.start	= IXP4XX_UART2_BASE_PHYS,
+	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct plat_serial8250_port wrt300nv2_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device wrt300nv2_uart = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= wrt300nv2_uart_data,
+	},
+	.num_resources	= 1,
+	.resource	= &wrt300nv2_uart_resource,
+};
+
+static struct platform_device *wrt300nv2_devices[] __initdata = {
+	&wrt300nv2_flash,
+	&wrt300nv2_uart
+};
+
+static void __init wrt300nv2_init(void)
+{
+	ixp4xx_sys_init();
+
+	wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+	platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
+}
+
+#ifdef CONFIG_MACH_WRT300NV2
+MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= wrt300nv2_init,
+MACHINE_END
+#endif
+Index: linux-2.6.24/include/asm-arm/arch-ixp4xx/uncompress.h
+===================================================================
+--- linux-2.6.24.orig/include/asm-arm/arch-ixp4xx/uncompress.h	2008-03-12 21:21:26.000000000 +1030
+++ linux-2.6.24/include/asm-arm/arch-ixp4xx/uncompress.h	2008-03-12 21:21:27.000000000 +1030
+@@ -42,7 +42,7 @@
+ 	 */
+ 	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
+ 			 machine_is_gateway7001() || machine_is_wg302v2() ||
+-			 machine_is_pronghorn_metro())
+			 machine_is_pronghorn_metro() || machine_is_wrt300nv2())
+ 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ 	else
+ 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
--- a/target/linux/ixp4xx/patches-2.6.25/131-wrt300nv2_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/131-wrt300nv2_mac_plat_info.patch
@ -0,0 +1,41 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-setup.c	2007-10-23 19:20:08.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c	2007-10-23 19:22:19.000000000 +0200
+@@ -76,9 +76,36 @@
+ 	.resource	= &wrt300nv2_uart_resource,
+ };
+ 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info wrt300nv2_plat_eth[] = {
+	{
+		.phy		= -1,
+		.rxq		= 3,
+		.txreadyq	= 20,
+	}, {
+		.phy		= 1,
+		.rxq		= 4,
+		.txreadyq	= 21,
+	}
+};
+
+static struct platform_device wrt300nv2_eth[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= wrt300nv2_plat_eth,
+	}, {
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEC,
+		.dev.platform_data	= wrt300nv2_plat_eth + 1,
+	}
+};
+
+ static struct platform_device *wrt300nv2_devices[] __initdata = {
+ 	&wrt300nv2_flash,
+-	&wrt300nv2_uart
+	&wrt300nv2_uart,
+	&wrt300nv2_eth[0],
+	&wrt300nv2_eth[1],
+ };
+ 
+ static void __init wrt300nv2_init(void)
--- a/target/linux/ixp4xx/patches-2.6.25/140-sidewinder_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/140-sidewinder_support.patch
@ -0,0 +1,240 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig	2007-10-23 19:20:08.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig	2007-10-23 19:26:46.000000000 +0200
+@@ -65,6 +65,14 @@
+ 	  Engineering Pronghorn Metro Platform. For more
+ 	  information on this platform, see <file:Documentation/arm/IXP4xx>.
+ 
+config MACH_SIDEWINDER
+	bool "Sidewinder"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support the ADI 
+	  Engineering Sidewinder Platform. For more
+	  information on this platform, see <file:Documentation/arm/IXP4xx>.
+
+ config MACH_COMPEX
+ 	bool "Compex WP18 / NP18A"
+ 	select PCI
+@@ -163,7 +171,7 @@
+ #
+ config CPU_IXP46X
+ 	bool
+-	depends on MACH_IXDP465
+	depends on MACH_IXDP465 || MACH_SIDEWINDER
+ 	default y
+ 
+ config CPU_IXP43X
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Makefile linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.23/arch/arm/mach-ixp4xx/Makefile	2007-10-23 19:20:08.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile	2007-10-23 19:23:52.000000000 +0200
+@@ -19,6 +19,7 @@
+ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-pci.o
+ obj-pci-$(CONFIG_MACH_COMPEX)		+= ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
+obj-pci-$(CONFIG_MACH_SIDEWINDER)		+= sidewinder-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -36,6 +37,7 @@
+ obj-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-setup.o
+ obj-$(CONFIG_MACH_COMPEX)	+= compex-setup.o
+ obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
+obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/sidewinder-pci.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/sidewinder-pci.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/sidewinder-pci.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/sidewinder-pci.c	2007-10-23 19:23:52.000000000 +0200
+@@ -0,0 +1,71 @@
+/*
+ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
+ *
+ * PCI setup routines for ADI Engineering Sidewinder
+ *
+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-pci.c:
+ *	Copyright (C) 2002 Jungo Software Technologies.
+ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
+ *
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/pci.h>
+
+extern void ixp4xx_pci_preinit(void);
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
+
+void __init sidewinder_pci_preinit(void)
+{
+	set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init sidewinder_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (slot == 1)
+		return IRQ_IXP4XX_GPIO11;
+	else if (slot == 2)
+		return IRQ_IXP4XX_GPIO10;
+	else if (slot == 3)
+		return IRQ_IXP4XX_GPIO9;
+	else return -1;
+}
+
+struct hw_pci sidewinder_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit =        sidewinder_pci_preinit,
+	.swizzle =        pci_std_swizzle,
+	.setup =          ixp4xx_setup,
+	.scan =           ixp4xx_scan_bus,
+	.map_irq =        sidewinder_map_irq,
+};
+
+int __init sidewinder_pci_init(void)
+{
+	if (machine_is_sidewinder())
+		pci_common_init(&sidewinder_pci);
+	return 0;
+}
+
+subsys_initcall(sidewinder_pci_init);
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/sidewinder-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/sidewinder-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/sidewinder-setup.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/sidewinder-setup.c	2007-10-23 19:23:52.000000000 +0200
+@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-ixp4xx/sidewinder-setup.c
+ *
+ * Board setup for the ADI Engineering Sidewinder
+ *
+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
+ *
+ * based on coyote-setup.c:
+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <Kaloz@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data sidewinder_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource sidewinder_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device sidewinder_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &sidewinder_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &sidewinder_flash_resource,
+};
+
+static struct resource sidewinder_uart_resources[] = {
+	{
+	.start	= IXP4XX_UART1_BASE_PHYS,
+	.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+	.flags	= IORESOURCE_MEM,
+	},
+	{
+	.start	= IXP4XX_UART2_BASE_PHYS,
+	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+	.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct plat_serial8250_port sidewinder_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device sidewinder_uart = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= sidewinder_uart_data,
+	},
+	.num_resources	= 2,
+	.resource	= &sidewinder_uart_resources,
+};
+
+static struct platform_device *sidewinder_devices[] __initdata = {
+	&sidewinder_flash,
+	&sidewinder_uart,
+};
+
+static void __init sidewinder_init(void)
+{
+	ixp4xx_sys_init();
+
+	sidewinder_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	sidewinder_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_64M - 1;
+
+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+	platform_add_devices(sidewinder_devices, ARRAY_SIZE(sidewinder_devices));
+}
+
+#ifdef CONFIG_MACH_SIDEWINDER
+MACHINE_START(SIDEWINDER, "ADI Engineering Sidewinder")
+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= sidewinder_init,
+MACHINE_END
+#endif
--- a/target/linux/ixp4xx/patches-2.6.25/150-lanready_ap1000_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/150-lanready_ap1000_support.patch
@ -0,0 +1,204 @@
+diff -Nur linux-2.6.23.1/arch/arm/mach-ixp4xx/ap1000-setup.c linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ap1000-setup.c
+--- linux-2.6.23.1/arch/arm/mach-ixp4xx/ap1000-setup.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ap1000-setup.c	2007-11-14 13:58:58.000000000 +0100
+@@ -0,0 +1,151 @@
+/*
+ * arch/arm/mach-ixp4xx/ap1000-setup.c
+ *
+ * Lanready AP-1000
+ *
+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
+ *
+ * based on ixdp425-setup.c:
+ *	Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <Kaloz@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data ap1000_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource ap1000_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device ap1000_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &ap1000_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &ap1000_flash_resource,
+};
+
+static struct resource ap1000_uart_resources[] = {
+	{
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM
+	},
+	{
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM
+	}
+};
+
+static struct plat_serial8250_port ap1000_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device ap1000_uart = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev.platform_data	= ap1000_uart_data,
+	.num_resources		= 2,
+	.resource		= ap1000_uart_resources
+};
+
+static struct platform_device *ap1000_devices[] __initdata = {
+	&ap1000_flash,
+	&ap1000_uart
+};
+
+static char ap1000_mem_fixup[] __initdata = "mem=64M ";
+
+static void __init ap1000_fixup(struct machine_desc *desc,
+		struct tag *tags, char **cmdline, struct meminfo *mi)
+
+{
+	struct tag *t = tags;
+	char *p = *cmdline;
+
+	/* Find the end of the tags table, taking note of any cmdline tag. */
+	for (; t->hdr.size; t = tag_next(t)) {
+		if (t->hdr.tag == ATAG_CMDLINE) {
+			p = t->u.cmdline.cmdline;
+		}
+	}
+
+	/* Overwrite the end of the table with a new cmdline tag. */
+	t->hdr.tag = ATAG_CMDLINE;
+	t->hdr.size = (sizeof (struct tag_header) +
+		strlen(ap1000_mem_fixup) + strlen(p) + 1 + 4) >> 2;
+	strlcpy(t->u.cmdline.cmdline, ap1000_mem_fixup, COMMAND_LINE_SIZE);
+	strlcpy(t->u.cmdline.cmdline + strlen(ap1000_mem_fixup), p,
+		COMMAND_LINE_SIZE - strlen(ap1000_mem_fixup));
+
+	/* Terminate the table. */
+	t = tag_next(t);
+	t->hdr.tag = ATAG_NONE;
+	t->hdr.size = 0;
+}
+
+static void __init ap1000_init(void)
+{
+	ixp4xx_sys_init();
+
+	ap1000_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	ap1000_flash_resource.end =
+		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+	platform_add_devices(ap1000_devices, ARRAY_SIZE(ap1000_devices));
+}
+
+#ifdef CONFIG_MACH_AP1000
+MACHINE_START(AP1000, "Lanready AP-1000")
+	/* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.fixup		= ap1000_fixup,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= ap1000_init,
+MACHINE_END
+#endif
+diff -Nur linux-2.6.23.1/arch/arm/mach-ixp4xx/ixdp425-pci.c linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c
+--- linux-2.6.23.1/arch/arm/mach-ixp4xx/ixdp425-pci.c	2007-11-14 13:15:50.000000000 +0100
+++ linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c	2007-11-14 13:27:16.000000000 +0100
+@@ -66,7 +66,8 @@
+ int __init ixdp425_pci_init(void)
+ {
+ 	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
+-			machine_is_ixdp465() || machine_is_kixrp435() || machine_is_compex())
+			machine_is_ixdp465() || machine_is_kixrp435() ||
+			machine_is_compex() || machine_is_ap1000())
+ 		pci_common_init(&ixdp425_pci);
+ 	return 0;
+ }
+diff -Nur linux-2.6.23.1/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.23.1/arch/arm/mach-ixp4xx/Kconfig	2007-11-14 13:15:50.000000000 +0100
+++ linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/Kconfig	2007-11-14 13:25:07.000000000 +0100
+@@ -89,6 +89,14 @@
+ 	  WRT300N v2 router. For more information on this
+ 	  platform, see http://openwrt.org
+ 
+config MACH_AP1000
+	bool "Lanready AP-1000"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support Lanready's
+	  AP1000 board. For more information on this
+	  platform, see http://openwrt.org
+
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+diff -Nur linux-2.6.23.1/arch/arm/mach-ixp4xx/Makefile linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.23.1/arch/arm/mach-ixp4xx/Makefile	2007-11-14 13:15:50.000000000 +0100
+++ linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/Makefile	2007-11-14 13:31:29.000000000 +0100
+@@ -20,6 +20,7 @@
+ obj-pci-$(CONFIG_MACH_COMPEX)		+= ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
+ obj-pci-$(CONFIG_MACH_SIDEWINDER)		+= sidewinder-pci.o
+obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -38,5 +39,6 @@
+ obj-$(CONFIG_MACH_COMPEX)	+= compex-setup.o
+ obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
+ obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
+obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
--- a/target/linux/ixp4xx/patches-2.6.25/151-lanready_ap1000_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/151-lanready_ap1000_mac_plat_info.patch
@ -0,0 +1,41 @@
+diff -Nur linux-2.6.23.1/arch/arm/mach-ixp4xx/ap1000-setup.c linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ap1000-setup.c
+--- linux-2.6.23.1/arch/arm/mach-ixp4xx/ap1000-setup.c	2007-11-14 14:11:10.000000000 +0100
+++ linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ap1000-setup.c	2007-11-14 14:09:30.000000000 +0100
+@@ -90,9 +90,36 @@
+ 	.resource		= ap1000_uart_resources
+ };
+ 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info ap1000_plat_eth[] = {
+	{
+		.phy		= 4,
+		.rxq		= 3,
+		.txreadyq	= 20,
+	}, {
+		.phy		= 5,
+		.rxq		= 4,
+		.txreadyq	= 21,
+	}
+};
+
+static struct platform_device ap1000_eth[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= ap1000_plat_eth,
+	}, {
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEC,
+		.dev.platform_data	= ap1000_plat_eth + 1,
+	}
+};
+
+ static struct platform_device *ap1000_devices[] __initdata = {
+ 	&ap1000_flash,
+-	&ap1000_uart
+	&ap1000_uart,
+	&ap1000_eth[0],
+	&ap1000_eth[1],
+ };
+ 
+ static char ap1000_mem_fixup[] __initdata = "mem=64M ";
--- a/target/linux/ixp4xx/patches-2.6.25/160-wg302v1_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/160-wg302v1_support.patch
@ -0,0 +1,221 @@
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Kconfig	2008-03-12 21:21:28.000000000 +1030
+++ linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig	2008-03-12 21:21:29.000000000 +1030
+@@ -49,6 +49,14 @@
+ 	  7001 Access Point. For more information on this platform,
+ 	  see http://openwrt.org
+ 
+config MACH_WG302V1
+	bool "Netgear WG302 v1 / WAG302 v1"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support Netgear's
+	  WG302 v1 or WAG302 v1 Access Points. For more information
+	  on this platform, see http://openwrt.org
+
+ config MACH_WG302V2
+ 	bool "Netgear WG302 v2 / WAG302 v2"
+ 	select PCI
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Makefile
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Makefile	2008-03-12 21:21:28.000000000 +1030
+++ linux-2.6.24/arch/arm/mach-ixp4xx/Makefile	2008-03-12 21:21:29.000000000 +1030
+@@ -14,6 +14,7 @@
+ obj-pci-$(CONFIG_MACH_NAS100D)		+= nas100d-pci.o
+ obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o
+ obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
+obj-pci-$(CONFIG_MACH_WG302V1)		+= wg302v1-pci.o
+ obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
+ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-pci.o
+@@ -33,6 +34,7 @@
+ obj-$(CONFIG_MACH_NAS100D)	+= nas100d-setup.o nas100d-power.o
+ obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o dsmg600-power.o
+ obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
+obj-$(CONFIG_MACH_WG302V1)	+= wg302v1-setup.o
+ obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
+ obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+ obj-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-setup.o
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/wg302v1-pci.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.24/arch/arm/mach-ixp4xx/wg302v1-pci.c	2008-03-12 21:21:29.000000000 +1030
+@@ -0,0 +1,63 @@
+/*
+ * arch/arch/mach-ixp4xx/wg302v1-pci.c
+ *
+ * PCI setup routines for the Netgear WG302 v1 and WAG302 v1
+ *
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-pci.c:
+ *	Copyright (C) 2002 Jungo Software Technologies.
+ *	Copyright (C) 2003 MontaVista Software, Inc.
+ *
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+
+#include <asm/mach/pci.h>
+
+void __init wg302v1_pci_preinit(void)
+{
+	set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init wg302v1_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (slot == 1)
+		return IRQ_IXP4XX_GPIO8;
+	else if (slot == 2)
+		return IRQ_IXP4XX_GPIO10;
+	else return -1;
+}
+
+struct hw_pci wg302v1_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit =        wg302v1_pci_preinit,
+	.swizzle =        pci_std_swizzle,
+	.setup =          ixp4xx_setup,
+	.scan =           ixp4xx_scan_bus,
+	.map_irq =        wg302v1_map_irq,
+};
+
+int __init wg302v1_pci_init(void)
+{
+	if (machine_is_wg302v1())
+		pci_common_init(&wg302v1_pci);
+	return 0;
+}
+
+subsys_initcall(wg302v1_pci_init);
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/wg302v1-setup.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.24/arch/arm/mach-ixp4xx/wg302v1-setup.c	2008-03-12 21:21:29.000000000 +1030
+@@ -0,0 +1,109 @@
+/*
+ * arch/arm/mach-ixp4xx/wg302v1-setup.c
+ *
+ * Board setup for the Netgear WG302 v1 and WAG302 v1
+ *
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-setup.c:
+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <kaloz@openwrt.org>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data wg302v1_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource wg302v1_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device wg302v1_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &wg302v1_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &wg302v1_flash_resource,
+};
+
+static struct resource wg302v1_uart_resource = {
+	.start	= IXP4XX_UART1_BASE_PHYS,
+	.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct plat_serial8250_port wg302v1_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device wg302v1_uart = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= wg302v1_uart_data,
+	},
+	.num_resources	= 1,
+	.resource	= &wg302v1_uart_resource,
+};
+
+static struct platform_device *wg302v1_devices[] __initdata = {
+	&wg302v1_flash,
+	&wg302v1_uart,
+};
+
+static void __init wg302v1_init(void)
+{
+	ixp4xx_sys_init();
+
+	wg302v1_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	wg302v1_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+	platform_add_devices(wg302v1_devices, ARRAY_SIZE(wg302v1_devices));
+}
+
+#ifdef CONFIG_MACH_WG302V1
+MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= wg302v1_init,
+MACHINE_END
+#endif
--- a/target/linux/ixp4xx/patches-2.6.25/161-wg302v1_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/161-wg302v1_mac_plat_info.patch
@ -0,0 +1,31 @@
+diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c
+--- linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c	2008-01-14 23:06:42.000000000 +0100
+++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c	2008-01-14 23:03:16.000000000 +0100
+@@ -77,9 +77,27 @@
+ 	.resource	= &wg302v1_uart_resource,
+ };
+ 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info wg302_plat_eth[] = {
+	{
+		.phy		= 30,
+		.rxq		= 3,
+		.txreadyq	= 20,
+	}
+};
+
+static struct platform_device wg302_eth[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= wg302_plat_eth,
+	}
+};
+
+ static struct platform_device *wg302v1_devices[] __initdata = {
+ 	&wg302v1_flash,
+ 	&wg302v1_uart,
+	&wg302_eth[0],
+ };
+ 
+ static void __init wg302v1_init(void)
--- a/target/linux/ixp4xx/patches-2.6.25/162-wg302v1_mem_fixup.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/162-wg302v1_mem_fixup.patch
@ -0,0 +1,48 @@
+diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c
+--- linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c	2008-01-14 23:12:03.000000000 +0100
+++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c	2008-01-14 23:11:34.000000000 +0100
+@@ -100,6 +100,36 @@
+ 	&wg302_eth[0],
+ };
+ 
+static char wg302v1_mem_fixup[] __initdata = "mem=32M ";
+
+static void __init wg302v1_fixup(struct machine_desc *desc,
+		struct tag *tags, char **cmdline, struct meminfo *mi)
+
+{
+	struct tag *t = tags;
+	char *p = *cmdline;
+
+	/* Find the end of the tags table, taking note of any cmdline tag. */
+	for (; t->hdr.size; t = tag_next(t)) {
+		if (t->hdr.tag == ATAG_CMDLINE) {
+			p = t->u.cmdline.cmdline;
+		}
+	}
+
+	/* Overwrite the end of the table with a new cmdline tag. */
+	t->hdr.tag = ATAG_CMDLINE;
+	t->hdr.size = (sizeof (struct tag_header) +
+		strlen(wg302v1_mem_fixup) + strlen(p) + 1 + 4) >> 2;
+	strlcpy(t->u.cmdline.cmdline, wg302v1_mem_fixup, COMMAND_LINE_SIZE);
+	strlcpy(t->u.cmdline.cmdline + strlen(wg302v1_mem_fixup), p,
+		COMMAND_LINE_SIZE - strlen(wg302v1_mem_fixup));
+
+	/* Terminate the table. */
+	t = tag_next(t);
+	t->hdr.tag = ATAG_NONE;
+	t->hdr.size = 0;
+}
+
+ static void __init wg302v1_init(void)
+ {
+ 	ixp4xx_sys_init();
+@@ -118,6 +148,7 @@
+ 	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+ 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+ 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.fixup		= wg302v1_fixup,
+ 	.map_io		= ixp4xx_map_io,
+ 	.init_irq	= ixp4xx_init_irq,
+ 	.timer		= &ixp4xx_timer,
--- a/target/linux/ixp4xx/patches-2.6.25/170-ixdpg425_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/170-ixdpg425_mac_plat_info.patch
@ -0,0 +1,41 @@
+--- linux-2.6.24.2/arch/arm/mach-ixp4xx/coyote-setup.c	2008-02-11 06:51:11.000000000 +0100
+++ linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/coyote-setup.c	2008-04-07 12:39:48.000000000 +0200
+@@ -73,9 +73,37 @@
+ 	.resource	= &coyote_uart_resource,
+ };
+ 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info ixdpg425_plat_eth[] = {
+        {
+                .phy            = 5,
+                .rxq            = 3,
+                .txreadyq       = 20,
+        }, {
+                .phy            = 4,
+                .rxq            = 4,
+                .txreadyq       = 21,
+        }
+};
+
+static struct platform_device ixdpg425_eth[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= ixdpg425_plat_eth,
+	}, {
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEC,
+		.dev.platform_data	= ixdpg425_plat_eth + 1,
+	}
+};
+
+
+ static struct platform_device *coyote_devices[] __initdata = {
+ 	&coyote_flash,
+-	&coyote_uart
+	&coyote_uart,
+	&ixdpg425_eth[0],
+	&ixdpg425_eth[1],
+ };
+ 
+ static void __init coyote_init(void)
--- a/target/linux/ixp4xx/patches-2.6.25/180-tw5334_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/180-tw5334_support.patch
@ -0,0 +1,288 @@
+diff -Nur linux-2.6.24.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.24.2/arch/arm/mach-ixp4xx/Kconfig	2008-04-09 01:34:46.000000000 +0200
+++ linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/Kconfig	2008-04-09 00:06:48.000000000 +0200
+@@ -150,6 +150,14 @@
+ 	  PrPCM1100 Processor Mezanine Module. For more information on
+ 	  this platform, see <file:Documentation/arm/IXP4xx>.
+ 
+config MACH_TW5334
+	bool "Titan Wireless TW-533-4"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support the Titan
+	  Wireless TW533-4. For more information on this platform,
+	  see http://openwrt.org
+
+ config MACH_NAS100D
+ 	bool
+ 	prompt "NAS100D"
+diff -Nur linux-2.6.24.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.24.2/arch/arm/mach-ixp4xx/Makefile	2008-04-09 01:34:46.000000000 +0200
+++ linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/Makefile	2008-04-09 00:07:45.000000000 +0200
+@@ -22,6 +22,7 @@
+ obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
+ obj-pci-$(CONFIG_MACH_SIDEWINDER)		+= sidewinder-pci.o
+ obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
+obj-pci-$(CONFIG_MACH_TW5334)		+= tw5334-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -42,6 +43,7 @@
+ obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
+ obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
+ obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
+obj-$(CONFIG_MACH_TW5334)	+= tw5334-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+diff -Nur linux-2.6.24.2/arch/arm/mach-ixp4xx/tw5334-setup.c linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/tw5334-setup.c
+--- linux-2.6.24.2/arch/arm/mach-ixp4xx/tw5334-setup.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/tw5334-setup.c	2008-04-09 01:58:52.000000000 +0200
+@@ -0,0 +1,162 @@
+/*
+ * arch/arm/mach-ixp4xx/tw5334-setup.c
+ *
+ * Board setup for the Titan Wireless TW-533-4
+ *
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-setup.c:
+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <Kaloz@openwrt.org>
+ */
+
+#include <linux/if_ether.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data tw5334_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource tw5334_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device tw5334_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &tw5334_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &tw5334_flash_resource,
+};
+
+static struct resource tw5334_uart_resource = {
+	.start	= IXP4XX_UART2_BASE_PHYS,
+	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct plat_serial8250_port tw5334_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device tw5334_uart = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= tw5334_uart_data,
+	},
+	.num_resources	= 1,
+	.resource	= &tw5334_uart_resource,
+};
+
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info tw5334_plat_eth[] = {
+        {
+                .phy            = 0,
+                .rxq            = 3,
+		.txreadyq	= 20,
+        }, {
+                .phy            = 1,
+                .rxq            = 4,
+		.txreadyq	= 21,
+	}
+};
+
+static struct platform_device tw5334_eth[] = {
+        {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEB,
+                .dev.platform_data      = tw5334_plat_eth,
+        }, {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEC,
+                .dev.platform_data      = tw5334_plat_eth + 1,
+	}
+};
+
+static struct platform_device *tw5334_devices[] __initdata = {
+	&tw5334_flash,
+	&tw5334_uart,
+	&tw5334_eth[0],
+	&tw5334_eth[1],
+};
+
+static void __init tw5334_init(void)
+{
+	DECLARE_MAC_BUF(mac_buf);
+	uint8_t __iomem *f;
+	int i;
+
+	ixp4xx_sys_init();
+
+	tw5334_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	tw5334_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+	platform_add_devices(tw5334_devices, ARRAY_SIZE(tw5334_devices));
+
+	/*
+	 * Map in a portion of the flash and read the MAC addresses.
+	 * Since it is stored in BE in the flash itself, we need to
+	 * byteswap it if we're in LE mode.
+	 */
+	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000);
+	if (f) {
+		for (i = 0; i < 6; i++)
+#ifdef __ARMEB__
+		tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + i);
+		tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + i);
+#else
+		tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + (i^3));
+		tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + (i^3));
+#endif
+		iounmap(f);
+	}
+	printk(KERN_INFO "TW-533-4: Using MAC address %s for port 0\n",
+		print_mac(mac_buf, tw5334_plat_eth[0].hwaddr));
+	printk(KERN_INFO "TW-533-4: Using MAC address %s for port 1\n",
+		print_mac(mac_buf, tw5334_plat_eth[1].hwaddr));
+}
+
+#ifdef CONFIG_MACH_TW5334
+MACHINE_START(TW5334, "Titan Wireless TW-533-4")
+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= tw5334_init,
+MACHINE_END
+#endif
+diff -Nur linux-2.6.24.2/arch/arm/mach-ixp4xx/tw5334-pci.c linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/tw5334-pci.c
+--- linux-2.6.24.2/arch/arm/mach-ixp4xx/tw5334-pci.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/tw5334-pci.c	2008-04-09 00:35:32.000000000 +0200
+@@ -0,0 +1,69 @@
+/*
+ * arch/arch/mach-ixp4xx/tw5334-pci.c
+ *
+ * PCI setup routines for the Titan Wireless TW-533-4
+ *
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-pci.c:
+ *	Copyright (C) 2002 Jungo Software Technologies.
+ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
+ *
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+
+#include <asm/mach/pci.h>
+
+void __init tw5334_pci_preinit(void)
+{
+	set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO2, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO1, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO0, IRQT_LOW);
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init tw5334_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (slot == 12)
+		return IRQ_IXP4XX_GPIO6;
+	else if (slot == 13)
+		return IRQ_IXP4XX_GPIO2;
+	else if (slot == 14)
+		return IRQ_IXP4XX_GPIO1;
+	else if (slot == 15)
+		return IRQ_IXP4XX_GPIO0;
+	else return -1;
+}
+
+struct hw_pci tw5334_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit =        tw5334_pci_preinit,
+	.swizzle =        pci_std_swizzle,
+	.setup =          ixp4xx_setup,
+	.scan =           ixp4xx_scan_bus,
+	.map_irq =        tw5334_map_irq,
+};
+
+int __init tw5334_pci_init(void)
+{
+	if (machine_is_tw5334())
+		pci_common_init(&tw5334_pci);
+	return 0;
+}
+
+subsys_initcall(tw5334_pci_init);
+--- linux-2.6.24.2/include/asm-arm/arch-ixp4xx/uncompress.h	2008-04-07 08:59:19.000000000 +0200
+++ linux-2.6.24.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h	2008-04-09 13:22:42.000000000 +0200
+@@ -42,7 +42,8 @@
+ 	 */
+ 	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
+ 			 machine_is_gateway7001() || machine_is_wg302v2() ||
+-			 machine_is_pronghorn_metro() || machine_is_wrt300nv2())
+			 machine_is_pronghorn_metro() || machine_is_wrt300nv2() ||
+			 machine_is_tw5334())
+ 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ 	else
+ 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
--- a/target/linux/ixp4xx/patches-2.6.25/200-npe_driver.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/200-npe_driver.patch
--- a/target/linux/ixp4xx/patches-2.6.25/201-npe_driver_print_license_location.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/201-npe_driver_print_license_location.patch
@ -0,0 +1,12 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/ixp4xx_npe.c linux-2.6.23-openwrt/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/ixp4xx_npe.c	2007-10-22 22:18:15.000000000 +0200
+++ linux-2.6.23-openwrt/arch/arm/mach-ixp4xx/ixp4xx_npe.c	2007-10-22 22:32:48.000000000 +0200
+@@ -585,6 +585,8 @@
+ 	npe_reset(npe);
+ #endif
+ 
+	print_npe(KERN_INFO, npe, "firmware's license can be found in /usr/share/doc/LICENSE.IPL\n");
+
+ 	print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
+ 		  "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
+ 		  (image->id >> 8) & 0xFF, image->id & 0xFF);
--- a/target/linux/ixp4xx/patches-2.6.25/294-eeprom_new_notifier.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/294-eeprom_new_notifier.patch
@ -0,0 +1,187 @@
+diff -uprN linux-2.6.23.orig/drivers/i2c/chips/eeprom.c linux-2.6.23/drivers/i2c/chips/eeprom.c
+--- linux-2.6.23.orig/drivers/i2c/chips/eeprom.c	2007-10-09 15:31:38.000000000 -0500
+++ linux-2.6.23/drivers/i2c/chips/eeprom.c	2007-10-11 00:57:25.000000000 -0500
+@@ -33,6 +33,8 @@
+ #include <linux/jiffies.h>
+ #include <linux/i2c.h>
+ #include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/eeprom.h>
+ 
+ /* Addresses to scan */
+ static unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
+@@ -41,26 +43,7 @@ static unsigned short normal_i2c[] = { 0
+ /* Insmod parameters */
+ I2C_CLIENT_INSMOD_1(eeprom);
+ 
+-
+-/* Size of EEPROM in bytes */
+-#define EEPROM_SIZE		256
+-
+-/* possible types of eeprom devices */
+-enum eeprom_nature {
+-	UNKNOWN,
+-	VAIO,
+-};
+-
+-/* Each client has this additional data */
+-struct eeprom_data {
+-	struct i2c_client client;
+-	struct mutex update_lock;
+-	u8 valid;			/* bitfield, bit!=0 if slice is valid */
+-	unsigned long last_updated[8];	/* In jiffies, 8 slices */
+-	u8 data[EEPROM_SIZE];		/* Register values */
+-	enum eeprom_nature nature;
+-};
+-
+ATOMIC_NOTIFIER_HEAD(eeprom_chain);
+ 
+ static int eeprom_attach_adapter(struct i2c_adapter *adapter);
+ static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind);
+@@ -191,6 +174,7 @@ static int eeprom_detect(struct i2c_adap
+ 	data->valid = 0;
+ 	mutex_init(&data->update_lock);
+ 	data->nature = UNKNOWN;
+	data->attr = &eeprom_attr;
+ 
+ 	/* Tell the I2C layer a new client has arrived */
+ 	if ((err = i2c_attach_client(new_client)))
+@@ -214,6 +198,9 @@ static int eeprom_detect(struct i2c_adap
+ 	if (err)
+ 		goto exit_detach;
+ 
+	/* call the notifier chain */
+	atomic_notifier_call_chain(&eeprom_chain, EEPROM_REGISTER, data);
+
+ 	return 0;
+ 
+ exit_detach:
+@@ -239,6 +226,41 @@ static int eeprom_detach_client(struct i
+ 	return 0;
+ }
+ 
+/**
+ * register_eeprom_notifier - register a 'user' of EEPROM devices.
+ * @nb: pointer to notifier info structure
+ *
+ * Registers a callback function to be called upon detection
+ * of an EEPROM device.  Detection invokes the 'add' callback
+ * with the kobj of the mutex and a bin_attribute which allows
+ * read from the EEPROM.  The intention is that the notifier
+ * will be able to read system configuration from the notifier.
+ *
+ * Only EEPROMs detected *after* the addition of the notifier
+ * are notified.  I.e. EEPROMs already known to the system
+ * will not be notified - add the notifier from board level
+ * code!
+ */
+int register_eeprom_notifier(struct notifier_block *nb)
+{
+	return atomic_notifier_chain_register(&eeprom_chain, nb);
+}
+
+/**
+ *	unregister_eeprom_notifier - unregister a 'user' of EEPROM devices.
+ *	@old: pointer to notifier info structure
+ *
+ *	Removes a callback function from the list of 'users' to be
+ *	notified upon detection of EEPROM devices.
+ */
+int unregister_eeprom_notifier(struct notifier_block *nb)
+{
+	return atomic_notifier_chain_unregister(&eeprom_chain, nb);
+}
+
+EXPORT_SYMBOL_GPL(register_eeprom_notifier);
+EXPORT_SYMBOL_GPL(unregister_eeprom_notifier);
+
+ static int __init eeprom_init(void)
+ {
+ 	return i2c_add_driver(&eeprom_driver);
+diff -uprN linux-2.6.23.orig/include/linux/eeprom.h linux-2.6.23/include/linux/eeprom.h
+--- linux-2.6.23.orig/include/linux/eeprom.h	1969-12-31 18:00:00.000000000 -0600
+++ linux-2.6.23/include/linux/eeprom.h	2007-10-11 00:57:25.000000000 -0500
+@@ -0,0 +1,71 @@
+#ifndef _LINUX_EEPROM_H
+#define _LINUX_EEPROM_H
+/*
+ *  EEPROM notifier header
+ *
+ *  Copyright (C) 2006 John Bowler
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __KERNEL__
+#error This is a kernel header
+#endif
+
+#include <linux/list.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+
+/* Size of EEPROM in bytes */
+#define EEPROM_SIZE             256
+
+/* possible types of eeprom devices */
+enum eeprom_nature {
+	UNKNOWN,
+	VAIO,
+};
+
+/* Each client has this additional data */
+struct eeprom_data {
+	struct i2c_client client;
+	struct mutex update_lock;
+	u8 valid;			/* bitfield, bit!=0 if slice is valid */
+	unsigned long last_updated[8];	/* In jiffies, 8 slices */
+	u8 data[EEPROM_SIZE];		/* Register values */
+	enum eeprom_nature nature;
+	struct bin_attribute *attr;
+};
+
+/*
+ * This is very basic.
+ *
+ * If an EEPROM is detected on the I2C bus (this only works for
+ * I2C EEPROMs) the notifier chain  is called with
+ * both the I2C information and the kobject for the sysfs
+ * device which has been registers.  It is then possible to
+ * read from the device via the bin_attribute::read method
+ * to extract configuration information.
+ *
+ * Register the notifier in the board level code, there is no
+ * need to unregister it but you can if you want (it will save
+ * a little bit or kernel memory to do so).
+ */
+
+extern int register_eeprom_notifier(struct notifier_block *nb);
+extern int unregister_eeprom_notifier(struct notifier_block *nb);
+
+#endif /* _LINUX_EEPROM_H */
+diff -uprN linux-2.6.23.orig/include/linux/notifier.h linux-2.6.23/include/linux/notifier.h
+--- linux-2.6.23.orig/include/linux/notifier.h	2007-10-09 15:31:38.000000000 -0500
+++ linux-2.6.23/include/linux/notifier.h	2007-10-11 00:57:25.000000000 -0500
+@@ -231,5 +231,8 @@ static inline int notifier_to_errno(int 
+ #define PM_SUSPEND_PREPARE	0x0003 /* Going to suspend the system */
+ #define PM_POST_SUSPEND		0x0004 /* Suspend finished */
+ 
+/* eeprom notifier chain */
+#define EEPROM_REGISTER		0x0001
+
+ #endif /* __KERNEL__ */
+ #endif /* _LINUX_NOTIFIER_H */
--- a/target/linux/ixp4xx/patches-2.6.25/296-avila_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/296-avila_mac_plat_info.patch
@ -0,0 +1,55 @@
+Index: linux-2.6.24.2/arch/arm/mach-ixp4xx/avila-setup.c
+===================================================================
+--- linux-2.6.24.2.orig/arch/arm/mach-ixp4xx/avila-setup.c
+++ linux-2.6.24.2/arch/arm/mach-ixp4xx/avila-setup.c
+@@ -132,12 +132,42 @@ static struct platform_device avila_pata
+ 	.resource		= avila_pata_resources,
+ };
+ 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info avila_plat_eth[] = {
+	{
+		.phy		= 0,
+		.rxq		= 3,
+		.txreadyq	= 20,
+	}, {
+		.phy		= 1,
+		.rxq		= 4,
+		.txreadyq	= 21,
+	}
+};
+
+static struct platform_device avila_eth[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= avila_plat_eth,
+	}, {
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEC,
+		.dev.platform_data	= avila_plat_eth + 1,
+	}
+};
+
+ static struct platform_device *avila_devices[] __initdata = {
+ 	&avila_i2c_gpio,
+ 	&avila_flash,
+ 	&avila_uart
+ };
+ 
+static struct platform_device *avila_eth_devices[] = {
+	&avila_eth[0],
+	&avila_eth[1]
+};
+
+ static void __init avila_init(void)
+ {
+ 	ixp4xx_sys_init();
+@@ -159,6 +189,7 @@ static void __init avila_init(void)
+ 
+ 	platform_device_register(&avila_pata);
+ 
+	platform_add_devices(avila_eth_devices, ARRAY_SIZE(avila_eth_devices));
+ }
+ 
+ MACHINE_START(AVILA, "Gateworks Avila Network Platform")
--- a/target/linux/ixp4xx/patches-2.6.25/298-avila_rtc_fixup.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/298-avila_rtc_fixup.patch
@ -0,0 +1,55 @@
+diff -uprN linux-2.6.23.orig/arch/arm/mach-ixp4xx/avila-setup.c linux-2.6.23/arch/arm/mach-ixp4xx/avila-setup.c
+--- linux-2.6.23.orig/arch/arm/mach-ixp4xx/avila-setup.c	2007-10-09 15:31:38.000000000 -0500
+++ linux-2.6.23/arch/arm/mach-ixp4xx/avila-setup.c	2007-10-11 01:08:21.000000000 -0500
+@@ -138,6 +138,35 @@ static struct platform_device *avila_dev
+ 	&avila_uart
+ };
+ 
+static char avila_rtc_probe[] __initdata = "rtc-ds1672.probe=0,0x68 ";
+
+static void __init avila_fixup(struct machine_desc *desc,
+                struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+    struct tag *t = tags;
+    char *p = *cmdline;
+
+    /* Find the end of the tags table, taking note of any cmdline tag. */
+    for (; t->hdr.size; t = tag_next(t)) {
+        if (t->hdr.tag == ATAG_CMDLINE) {
+            p = t->u.cmdline.cmdline;
+        }
+    }
+
+    /* Overwrite the end of the table with a new cmdline tag. */
+    t->hdr.tag = ATAG_CMDLINE;
+    t->hdr.size = (sizeof (struct tag_header) +
+        strlen(avila_rtc_probe) + strlen(p) + 1 + 4) >> 2;
+    strlcpy(t->u.cmdline.cmdline, avila_rtc_probe, COMMAND_LINE_SIZE);
+    strlcpy(t->u.cmdline.cmdline + strlen(avila_rtc_probe), p,
+        COMMAND_LINE_SIZE - strlen(avila_rtc_probe));
+
+    /* Terminate the table. */
+    t = tag_next(t);
+    t->hdr.tag = ATAG_NONE;
+    t->hdr.size = 0;
+}
+
+ static void __init avila_init(void)
+ {
+ 	ixp4xx_sys_init();
+@@ -165,6 +194,7 @@ MACHINE_START(AVILA, "Gateworks Avila Ne
+ 	/* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
+ 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+ 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.fixup          = avila_fixup,
+ 	.map_io		= ixp4xx_map_io,
+ 	.init_irq	= ixp4xx_init_irq,
+ 	.timer		= &ixp4xx_timer,
+@@ -182,6 +212,7 @@ MACHINE_START(LOFT, "Giant Shoulder Inc 
+ 	/* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */
+ 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+ 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.fixup          = avila_fixup,
+ 	.map_io		= ixp4xx_map_io,
+ 	.init_irq	= ixp4xx_init_irq,
+ 	.timer		= &ixp4xx_timer,
--- a/target/linux/ixp4xx/patches-2.6.25/300-avila_fetch_mac.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/300-avila_fetch_mac.patch
@ -0,0 +1,154 @@
+Index: linux-2.6.24.2/arch/arm/mach-ixp4xx/avila-setup.c
+===================================================================
+--- linux-2.6.24.2.orig/arch/arm/mach-ixp4xx/avila-setup.c
+++ linux-2.6.24.2/arch/arm/mach-ixp4xx/avila-setup.c
+@@ -14,10 +14,18 @@
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+ #include <linux/device.h>
+#include <linux/if_ether.h>
+#include <linux/socket.h>
+#include <linux/netdevice.h>
+ #include <linux/serial.h>
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
+ #include <linux/slab.h>
+#ifdef CONFIG_SENSORS_EEPROM
+# include <linux/i2c.h>
+# include <linux/eeprom.h>
+#endif
+
+ #include <linux/i2c-gpio.h>
+ 
+ #include <asm/types.h>
+@@ -177,6 +185,118 @@ static struct platform_device *avila_eth
+ 	&avila_eth[1]
+ };
+ 
+#ifdef CONFIG_SENSORS_EEPROM
+struct avila_board_info {
+	unsigned char *model;
+	int	npes_used;
+	int	npeb_phy;
+	int	npec_phy;
+};
+
+static struct avila_board_info avila_boards[] = {
+	{
+		.model		= "GW2342",
+		.npes_used	= 2,
+		.npeb_phy	= 0,
+		.npec_phy	= 1,
+	}, {
+		.model		= "GW2347",
+		.npes_used	= 1,
+		.npeb_phy	= 1,
+	}, {
+		.model		= "GW2348-2",
+		.npes_used	= 2,
+		.npeb_phy	= 0,
+		.npec_phy	= 1,
+	}, {
+		.model		= "GW2348-4",
+		.npes_used	= 2,
+		.npeb_phy	= 0,
+		.npec_phy	= 1,
+	}, {
+		.model		= "GW2353",
+		.npes_used	= 1,
+		.npeb_phy	= 1,
+	}, {
+		.model		= "GW2355",
+		.npes_used	= 2,
+		.npeb_phy	= -1,
+		.npec_phy	= 1,
+	}, {
+		.model		= "GW2357",
+		.npes_used	= 1,
+		.npeb_phy	= 1,
+	}
+};
+
+static struct avila_board_info *avila_find_board_info(char *model)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(avila_boards); i++) {
+		struct avila_board_info *info = &avila_boards[i];
+		if (strncmp(info->model, model, strlen(info->model)) == 0)
+			return info;
+	}
+
+	return NULL;
+}
+
+struct avila_eeprom_header {
+	unsigned char mac0[ETH_ALEN];
+	unsigned char mac1[ETH_ALEN];
+	unsigned char res0[4];
+	unsigned char magic[2];
+	unsigned char config[14];
+	unsigned char model[16];
+};
+
+static int avila_eeprom_notify(struct notifier_block *self,
+			unsigned long event, void *t)
+{
+	struct eeprom_data *ee = t;
+	struct avila_board_info *info = NULL;
+	struct avila_eeprom_header hdr;
+
+	/* The eeprom is at address 0x51 */
+	if (event != EEPROM_REGISTER || ee->client.addr != 0x51)
+		return NOTIFY_DONE;
+
+	ee->attr->read(&ee->client.dev.kobj, ee->attr, (char *)&hdr,
+		0, sizeof(hdr));
+
+	if (hdr.magic[0] != 'G' || hdr.magic[1] != 'W')
+		return NOTIFY_DONE;
+
+	memcpy(&avila_plat_eth[0].hwaddr, hdr.mac0, ETH_ALEN);
+	memcpy(&avila_plat_eth[1].hwaddr, hdr.mac1, ETH_ALEN);
+
+	info = avila_find_board_info(hdr.model);
+
+	if (info) {
+		printk(KERN_DEBUG "Running on Gateworks Avila %s\n",
+							info->model);
+		avila_plat_eth[0].phy = info->npeb_phy;
+		avila_plat_eth[1].phy = info->npec_phy;
+		platform_add_devices(avila_eth_devices,
+			info->npes_used);
+	} else {
+		printk(KERN_INFO "Unknown/missing Avila model number"
+					" -- defaults will be used\n");
+		platform_add_devices(avila_eth_devices,
+			ARRAY_SIZE(avila_eth_devices));
+	}
+
+	unregister_eeprom_notifier(self);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block avila_eeprom_notifier = {
+       .notifier_call = avila_eeprom_notify
+};
+#endif
+
+ static void __init avila_init(void)
+ {
+ 	ixp4xx_sys_init();
+@@ -201,7 +321,11 @@ static void __init avila_init(void)
+ 
+ 	platform_device_register(&avila_pata);
+ 
+#ifdef CONFIG_SENSORS_EEPROM
+	register_eeprom_notifier(&avila_eeprom_notifier);
+#else
+ 	platform_add_devices(avila_eth_devices, ARRAY_SIZE(avila_eth_devices));
+#endif
+ }
+ 
+ MACHINE_START(AVILA, "Gateworks Avila Network Platform")
--- a/target/linux/ixp4xx/patches-2.6.25/301-avila_led.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/301-avila_led.patch
@ -0,0 +1,48 @@
+Index: linux-2.6.24.2/include/asm-arm/arch-ixp4xx/avila.h
+===================================================================
+--- linux-2.6.24.2.orig/include/asm-arm/arch-ixp4xx/avila.h
+++ linux-2.6.24.2/include/asm-arm/arch-ixp4xx/avila.h
+@@ -36,4 +36,5 @@
+ #define AVILA_PCI_INTC_PIN	9
+ #define AVILA_PCI_INTD_PIN	8
+ 
+-
+/* User LED */
+#define AVILA_LED_USER_GPIO	3
+Index: linux-2.6.24.2/arch/arm/mach-ixp4xx/avila-setup.c
+===================================================================
+--- linux-2.6.24.2.orig/arch/arm/mach-ixp4xx/avila-setup.c
+++ linux-2.6.24.2/arch/arm/mach-ixp4xx/avila-setup.c
+@@ -174,10 +174,31 @@ static struct platform_device avila_eth[
+ 	}
+ };
+ 
+#ifdef CONFIG_LEDS_IXP4XX
+static struct resource avila_led_resources[] = {
+	{
+		.name		= "user",
+		.start		= AVILA_LED_USER_GPIO,
+		.end		= AVILA_LED_USER_GPIO,
+		.flags		= IXP4XX_GPIO_LOW,
+	},
+};
+
+static struct platform_device avila_leds = {
+	.name			= "IXP4XX-GPIO-LED",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(avila_led_resources),
+	.resource		= avila_led_resources,
+};
+#endif
+
+ static struct platform_device *avila_devices[] __initdata = {
+ 	&avila_i2c_gpio,
+ 	&avila_flash,
+-	&avila_uart
+	&avila_uart,
+#ifdef CONFIG_LEDS_IXP4XX
+	&avila_leds,
+#endif
+ };
+ 
+ static struct platform_device *avila_eth_devices[] = {
--- a/target/linux/ixp4xx/patches-2.6.25/302-avila_gpio_device.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/302-avila_gpio_device.patch
@ -0,0 +1,50 @@
+Index: linux-2.6.24.2/arch/arm/mach-ixp4xx/avila-setup.c
+===================================================================
+--- linux-2.6.24.2.orig/arch/arm/mach-ixp4xx/avila-setup.c
+++ linux-2.6.24.2/arch/arm/mach-ixp4xx/avila-setup.c
+@@ -192,6 +192,24 @@ static struct platform_device avila_leds
+ };
+ #endif
+ 
+#ifdef CONFIG_GPIO_DEVICE
+static struct resource avila_gpio_resources[] = {
+	{
+		.name	= "gpio",
+		.start	= AVILA_GPIO_MASK,
+		.end	= AVILA_GPIO_MASK,
+		.flags	= 0,
+	},
+};
+
+static struct platform_device avila_gpio = {
+	.name			= "GPIODEV",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(avila_gpio_resources),
+	.resource		= avila_gpio_resources,
+};
+#endif
+
+ static struct platform_device *avila_devices[] __initdata = {
+ 	&avila_i2c_gpio,
+ 	&avila_flash,
+@@ -199,6 +217,9 @@ static struct platform_device *avila_dev
+ #ifdef CONFIG_LEDS_IXP4XX
+ 	&avila_leds,
+ #endif
+#ifdef CONFIG_GPIO_DEVICE
+	&avila_gpio,
+#endif
+ };
+ 
+ static struct platform_device *avila_eth_devices[] = {
+Index: linux-2.6.24.2/include/asm-arm/arch-ixp4xx/avila.h
+===================================================================
+--- linux-2.6.24.2.orig/include/asm-arm/arch-ixp4xx/avila.h
+++ linux-2.6.24.2/include/asm-arm/arch-ixp4xx/avila.h
+@@ -38,3 +38,6 @@
+ 
+ /* User LED */
+ #define AVILA_LED_USER_GPIO	3
+
+/* gpio mask used by platform device */
+#define AVILA_GPIO_MASK		(1 << 1) | (1 << 3) | (1 << 5) | (1 << 7) | (1 << 9)
--- a/target/linux/ixp4xx/patches-2.6.25/400-dmabounce.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/400-dmabounce.patch
@ -0,0 +1,31 @@
+Index: linux-2.6.23.14/arch/arm/common/dmabounce.c
+===================================================================
+--- linux-2.6.23.14.orig/arch/arm/common/dmabounce.c	2008-01-24 22:03:28.475500801 +0100
+++ linux-2.6.23.14/arch/arm/common/dmabounce.c	2008-01-24 22:17:36.415822168 +0100
+@@ -116,6 +116,10 @@
+ 	} else if (size <= device_info->large.size) {
+ 		pool = &device_info->large;
+ 	} else {
+#ifdef CONFIG_DMABOUNCE_DEBUG
+		printk(KERN_INFO "A dma bounce buffer outside the pool size was requested. Requested size was 0x%08X\nThe calling code was :\n", size);
+		dump_stack();
+#endif
+ 		pool = NULL;
+ 	}
+ 
+Index: linux-2.6.23.14/arch/arm/mach-ixp4xx/Kconfig
+===================================================================
+--- linux-2.6.23.14.orig/arch/arm/mach-ixp4xx/Kconfig	2008-01-24 22:10:29.331484012 +0100
+++ linux-2.6.23.14/arch/arm/mach-ixp4xx/Kconfig	2008-01-24 22:11:42.891675973 +0100
+@@ -220,6 +220,11 @@
+ 	default y
+ 	depends on PCI
+ 
+config DMABOUNCE_DEBUG
+	bool "Enable DMABounce debuging"
+	default n
+	depends on DMABOUNCE
+
+ config IXP4XX_INDIRECT_PCI
+ 	bool "Use indirect PCI memory access"
+ 	depends on PCI
--- a/target/linux/ixp4xx/patches-2.6.25/401-avila_pci_dev.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/401-avila_pci_dev.patch
@ -0,0 +1,13 @@
+Index: linux-2.6.23.14/include/asm-arm/arch-ixp4xx/avila.h
+===================================================================
+--- linux-2.6.23.14.orig/include/asm-arm/arch-ixp4xx/avila.h	2008-01-31 17:40:36.000000000 +0100
+++ linux-2.6.23.14/include/asm-arm/arch-ixp4xx/avila.h	2008-01-31 17:40:42.000000000 +0100
+@@ -25,7 +25,7 @@
+ /*
+  * AVILA PCI IRQs
+  */
+-#define AVILA_PCI_MAX_DEV	4
+#define AVILA_PCI_MAX_DEV	6
+ #define LOFT_PCI_MAX_DEV    6
+ #define AVILA_PCI_IRQ_LINES	4
+