qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-10-06 11:25:25 +03:00
Code

[rb532] remove 2.6.27 we did not use it and went to 2.6.28 directly

Browse Source 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15387 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
florian 2009-04-24 14:34:20 +00:00
parent 28844a0b61
commit 74567f6936
26 changed files with 0 additions and 2057 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

247
target/linux/rb532/config-2.6.27
View File

@ -1,247 +0,0 @@
CONFIG_32BIT=y
# CONFIG_64BIT is not set
# CONFIG_8139TOO is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_PIIX is not set
CONFIG_ATA_SFF=y
# CONFIG_ATM is not set
# CONFIG_AX25 is not set
CONFIG_BASE_SMALL=0
# CONFIG_BCM47XX is not set
CONFIG_BITREVERSE=y
CONFIG_BOOT_RAW=y
# CONFIG_BT is not set
CONFIG_CEVT_R4K=y
# CONFIG_CHR_DEV_SG is not set
CONFIG_CLASSIC_RCU=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_LOONGSON2 is not set
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
CONFIG_CPU_MIPSR1=y
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R10000 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_VR41XX is not set
CONFIG_CSRC_R4K=y
# CONFIG_DEBUG_FS is not set
CONFIG_DEVPORT=y
# CONFIG_DM9000 is not set
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_EXT2_FS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_CLK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_HAVE_IDE=y
# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=y
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_I2C is not set
# CONFIG_IDE is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQ_CPU=y
CONFIG_KEXEC=y
CONFIG_KMOD=y
CONFIG_KORINA=y
# CONFIG_LEDS_ALIX is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MACH_TX39XX is not set
# CONFIG_MACH_TX49XX is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MIKROTIK_RB532=y
CONFIG_MIPS=y
# CONFIG_MIPS_COBALT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=4
# CONFIG_MIPS_MACHINE is not set
# CONFIG_MIPS_MALTA is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_SIM is not set
CONFIG_MTD=y
# CONFIG_MTD_ABSENT is not set
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_BLOCK2MTD=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CHAR=y
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_START=0x8000000
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_NATSEMI is not set
# CONFIG_NET_SCH_ESFQ_NFCT is not set
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
# CONFIG_NO_IOPORT is not set
CONFIG_PAGEFLAGS_EXTENDED=y
# CONFIG_PAGE_SIZE_16KB is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_PAGE_SIZE_8KB is not set
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_RB532=y
# CONFIG_PATA_SCH is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PROBE_INITRD_HEADER is not set
# CONFIG_PROM_EMU is not set
# CONFIG_R6040 is not set
CONFIG_RC32434_WDT=y
CONFIG_RFKILL_LEDS=y
CONFIG_RTC_LIB=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_SCSI=y
# CONFIG_SCSI_WAIT_SCAN is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_SWARM is not set
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_SOUND is not set
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
# CONFIG_TC35815 is not set
# CONFIG_TICK_ONESHOT is not set
CONFIG_TRAD_SIGNALS=y
# CONFIG_VGASTATE is not set
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
# CONFIG_VIDEO_MEDIA is not set
# CONFIG_VIDEO_V4L2 is not set
# CONFIG_VIDEO_V4L2_COMMON is not set
CONFIG_YAFFS_9BYTE_TAGS=y
# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
CONFIG_YAFFS_AUTO_YAFFS2=y
CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=0
# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
CONFIG_YAFFS_FS=y
CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
CONFIG_YAFFS_YAFFS1=y
CONFIG_YAFFS_YAFFS2=y
CONFIG_ZONE_DMA_FLAG=0

743
target/linux/rb532/patches-2.6.27/001-git_diffs.patch
View File

@ -1,743 +0,0 @@
diff -urN a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
--- a/arch/mips/rb532/devices.c 2008-11-07 18:55:34.000000000 +0100
+++ b/arch/mips/rb532/devices.c 2008-11-15 17:43:28.000000000 +0100
@@ -34,21 +34,11 @@
#include <asm/mach-rc32434/rb.h>
#include <asm/mach-rc32434/integ.h>
#include <asm/mach-rc32434/gpio.h>
-
-#define ETH0_DMA_RX_IRQ (GROUP1_IRQ_BASE + 0)
-#define ETH0_DMA_TX_IRQ (GROUP1_IRQ_BASE + 1)
-#define ETH0_RX_OVR_IRQ (GROUP3_IRQ_BASE + 9)
-#define ETH0_TX_UND_IRQ (GROUP3_IRQ_BASE + 10)
+#include <asm/mach-rc32434/irq.h>
#define ETH0_RX_DMA_ADDR (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
#define ETH0_TX_DMA_ADDR (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
-/* NAND definitions */
-#define GPIO_RDY (1 << 0x08)
-#define GPIO_WPX (1 << 0x09)
-#define GPIO_ALE (1 << 0x0a)
-#define GPIO_CLE (1 << 0x0b)
-
static struct resource korina_dev0_res[] = {
{
.name = "korina_regs",
@@ -94,15 +84,13 @@
};
static struct platform_device korina_dev0 = {
- .id = 0,
+ .id = -1,
.name = "korina",
.dev.platform_data = &korina_dev0_data,
.resource = korina_dev0_res,
.num_resources = ARRAY_SIZE(korina_dev0_res),
};
-#define CF_GPIO_NUM 13
-
static struct resource cf_slot0_res[] = {
{
.name = "cf_membase",
@@ -116,11 +104,11 @@
};
static struct cf_device cf_slot0_data = {
- .gpio_pin = 13
+ .gpio_pin = CF_GPIO_NUM
};
static struct platform_device cf_slot0 = {
- .id = 0,
+ .id = -1,
.name = "pata-rb532-cf",
.dev.platform_data = &cf_slot0_data,
.resource = cf_slot0_res,
@@ -130,7 +118,7 @@
/* Resources and device for NAND */
static int rb532_dev_ready(struct mtd_info *mtd)
{
- return readl(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
+ return gpio_get_value(GPIO_RDY);
}
static void rb532_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
@@ -185,7 +173,7 @@
static struct platform_device rb532_led = {
.name = "rb532-led",
- .id = 0,
+ .id = -1,
};
static struct gpio_keys_button rb532_gpio_btn[] = {
@@ -292,7 +280,7 @@
{
/* Look for the CF card reader */
if (!readl(IDT434_REG_BASE + DEV1MASK))
- rb532_devs[1] = NULL;
+ rb532_devs[2] = NULL; /* disable cf_slot0 at index 2 */
else {
cf_slot0_res[0].start =
readl(IDT434_REG_BASE + DEV1BASE);
diff -urN a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
--- a/arch/mips/rb532/gpio.c 2008-11-07 18:55:34.000000000 +0100
+++ b/arch/mips/rb532/gpio.c 2008-11-15 17:43:28.000000000 +0100
@@ -27,28 +27,27 @@
*/
#include <linux/kernel.h>
-#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/types.h>
-#include <linux/pci.h>
#include <linux/spinlock.h>
-#include <linux/io.h>
#include <linux/platform_device.h>
-
-#include <asm/addrspace.h>
+#include <linux/gpio.h>
#include <asm/mach-rc32434/rb.h>
+#include <asm/mach-rc32434/gpio.h>
-struct rb532_gpio_reg __iomem *rb532_gpio_reg0;
-EXPORT_SYMBOL(rb532_gpio_reg0);
+struct rb532_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *regbase;
+};
struct mpmc_device dev3;
static struct resource rb532_gpio_reg0_res[] = {
{
.name = "gpio_reg0",
- .start = (u32)(IDT434_REG_BASE + GPIOBASE),
- .end = (u32)(IDT434_REG_BASE + GPIOBASE + sizeof(struct rb532_gpio_reg)),
+ .start = REGBASE + GPIOBASE,
+ .end = REGBASE + GPIOBASE + sizeof(struct rb532_gpio_reg) - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -56,8 +55,8 @@
static struct resource rb532_dev3_ctl_res[] = {
{
.name = "dev3_ctl",
- .start = (u32)(IDT434_REG_BASE + DEV3BASE),
- .end = (u32)(IDT434_REG_BASE + DEV3BASE + sizeof(struct dev_reg)),
+ .start = REGBASE + DEV3BASE,
+ .end = REGBASE + DEV3BASE + sizeof(struct dev_reg) - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -70,7 +69,7 @@
spin_lock_irqsave(&dev3.lock, flags);
- data = *(volatile unsigned *) (IDT434_REG_BASE + reg_offs);
+ data = readl(IDT434_REG_BASE + reg_offs);
for (i = 0; i != len; ++i) {
if (val & (1 << i))
data |= (1 << (i + bit));
@@ -108,114 +107,166 @@
}
EXPORT_SYMBOL(get_latch_u5);
-int rb532_gpio_get_value(unsigned gpio)
+/* rb532_set_bit - sanely set a bit
+ *
+ * bitval: new value for the bit
+ * offset: bit index in the 4 byte address range
+ * ioaddr: 4 byte aligned address being altered
+ */
+static inline void rb532_set_bit(unsigned bitval,
+ unsigned offset, void __iomem *ioaddr)
{
- return readl(&rb532_gpio_reg0->gpiod) & (1 << gpio);
-}
-EXPORT_SYMBOL(rb532_gpio_get_value);
+ unsigned long flags;
+ u32 val;
-void rb532_gpio_set_value(unsigned gpio, int value)
-{
- unsigned tmp;
+ bitval = !!bitval; /* map parameter to {0,1} */
+
+ local_irq_save(flags);
- tmp = readl(&rb532_gpio_reg0->gpiod) & ~(1 << gpio);
- if (value)
- tmp |= 1 << gpio;
+ val = readl(ioaddr);
+ val &= ~( ~bitval << offset ); /* unset bit if bitval == 0 */
+ val |= ( bitval << offset ); /* set bit if bitval == 1 */
+ writel(val, ioaddr);
- writel(tmp, (void *)&rb532_gpio_reg0->gpiod);
+ local_irq_restore(flags);
}
-EXPORT_SYMBOL(rb532_gpio_set_value);
-int rb532_gpio_direction_input(unsigned gpio)
+/* rb532_get_bit - read a bit
+ *
+ * returns the boolean state of the bit, which may be > 1
+ */
+static inline int rb532_get_bit(unsigned offset, void __iomem *ioaddr)
{
- writel(readl(&rb532_gpio_reg0->gpiocfg) & ~(1 << gpio),
- (void *)&rb532_gpio_reg0->gpiocfg);
-
- return 0;
+ return (readl(ioaddr) & (1 << offset));
}
-EXPORT_SYMBOL(rb532_gpio_direction_input);
-int rb532_gpio_direction_output(unsigned gpio, int value)
+/*
+ * Return GPIO level */
+static int rb532_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- gpio_set_value(gpio, value);
- writel(readl(&rb532_gpio_reg0->gpiocfg) | (1 << gpio),
- (void *)&rb532_gpio_reg0->gpiocfg);
+ struct rb532_gpio_chip *gpch;
- return 0;
+ gpch = container_of(chip, struct rb532_gpio_chip, chip);
+ return rb532_get_bit(offset, gpch->regbase + GPIOD);
}
-EXPORT_SYMBOL(rb532_gpio_direction_output);
-void rb532_gpio_set_int_level(unsigned gpio, int value)
+/*
+ * Set output GPIO level
+ */
+static void rb532_gpio_set(struct gpio_chip *chip,
+ unsigned offset, int value)
{
- unsigned tmp;
+ struct rb532_gpio_chip *gpch;
- tmp = readl(&rb532_gpio_reg0->gpioilevel) & ~(1 << gpio);
- if (value)
- tmp |= 1 << gpio;
- writel(tmp, (void *)&rb532_gpio_reg0->gpioilevel);
+ gpch = container_of(chip, struct rb532_gpio_chip, chip);
+ rb532_set_bit(value, offset, gpch->regbase + GPIOD);
}
-EXPORT_SYMBOL(rb532_gpio_set_int_level);
-int rb532_gpio_get_int_level(unsigned gpio)
+/*
+ * Set GPIO direction to input
+ */
+static int rb532_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
- return readl(&rb532_gpio_reg0->gpioilevel) & (1 << gpio);
+ struct rb532_gpio_chip *gpch;
+
+ gpch = container_of(chip, struct rb532_gpio_chip, chip);
+
+ if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC))
+ return 1; /* alternate function, GPIOCFG is ignored */
+
+ rb532_set_bit(0, offset, gpch->regbase + GPIOCFG);
+ return 0;
}
-EXPORT_SYMBOL(rb532_gpio_get_int_level);
-void rb532_gpio_set_int_status(unsigned gpio, int value)
+/*
+ * Set GPIO direction to output
+ */
+static int rb532_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
{
- unsigned tmp;
+ struct rb532_gpio_chip *gpch;
+
+ gpch = container_of(chip, struct rb532_gpio_chip, chip);
- tmp = readl(&rb532_gpio_reg0->gpioistat);
- if (value)
- tmp |= 1 << gpio;
- writel(tmp, (void *)&rb532_gpio_reg0->gpioistat);
+ if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC))
+ return 1; /* alternate function, GPIOCFG is ignored */
+
+ /* set the initial output value */
+ rb532_set_bit(value, offset, gpch->regbase + GPIOD);
+
+ rb532_set_bit(1, offset, gpch->regbase + GPIOCFG);
+ return 0;
}
-EXPORT_SYMBOL(rb532_gpio_set_int_status);
-int rb532_gpio_get_int_status(unsigned gpio)
+static struct rb532_gpio_chip rb532_gpio_chip[] = {
+ [0] = {
+ .chip = {
+ .label = "gpio0",
+ .direction_input = rb532_gpio_direction_input,
+ .direction_output = rb532_gpio_direction_output,
+ .get = rb532_gpio_get,
+ .set = rb532_gpio_set,
+ .base = 0,
+ .ngpio = 32,
+ },
+ },
+};
+
+/*
+ * Set GPIO interrupt level
+ */
+void rb532_gpio_set_ilevel(int bit, unsigned gpio)
{
- return readl(&rb532_gpio_reg0->gpioistat) & (1 << gpio);
+ rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOILEVEL);
}
-EXPORT_SYMBOL(rb532_gpio_get_int_status);
+EXPORT_SYMBOL(rb532_gpio_set_ilevel);
-void rb532_gpio_set_func(unsigned gpio, int value)
+/*
+ * Set GPIO interrupt status
+ */
+void rb532_gpio_set_istat(int bit, unsigned gpio)
{
- unsigned tmp;
-
- tmp = readl(&rb532_gpio_reg0->gpiofunc);
- if (value)
- tmp |= 1 << gpio;
- writel(tmp, (void *)&rb532_gpio_reg0->gpiofunc);
+ rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOISTAT);
}
-EXPORT_SYMBOL(rb532_gpio_set_func);
+EXPORT_SYMBOL(rb532_gpio_set_istat);
-int rb532_gpio_get_func(unsigned gpio)
+/*
+ * Configure GPIO alternate function
+ */
+static void rb532_gpio_set_func(int bit, unsigned gpio)
{
- return readl(&rb532_gpio_reg0->gpiofunc) & (1 << gpio);
+ rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOFUNC);
}
-EXPORT_SYMBOL(rb532_gpio_get_func);
int __init rb532_gpio_init(void)
{
- rb532_gpio_reg0 = ioremap_nocache(rb532_gpio_reg0_res[0].start,
- rb532_gpio_reg0_res[0].end -
- rb532_gpio_reg0_res[0].start);
+ struct resource *r;
+
+ r = rb532_gpio_reg0_res;
+ rb532_gpio_chip->regbase = ioremap_nocache(r->start, r->end - r->start);
- if (!rb532_gpio_reg0) {
+ if (!rb532_gpio_chip->regbase) {
printk(KERN_ERR "rb532: cannot remap GPIO register 0\n");
return -ENXIO;
}
- dev3.base = ioremap_nocache(rb532_dev3_ctl_res[0].start,
- rb532_dev3_ctl_res[0].end -
- rb532_dev3_ctl_res[0].start);
+ /* Register our GPIO chip */
+ gpiochip_add(&rb532_gpio_chip->chip);
+
+ r = rb532_dev3_ctl_res;
+ dev3.base = ioremap_nocache(r->start, r->end - r->start);
if (!dev3.base) {
printk(KERN_ERR "rb532: cannot remap device controller 3\n");
return -ENXIO;
}
+ /* configure CF_GPIO_NUM as CFRDY IRQ source */
+ rb532_gpio_set_func(0, CF_GPIO_NUM);
+ rb532_gpio_direction_input(&rb532_gpio_chip->chip, CF_GPIO_NUM);
+ rb532_gpio_set_ilevel(1, CF_GPIO_NUM);
+ rb532_gpio_set_istat(0, CF_GPIO_NUM);
+
return 0;
}
arch_initcall(rb532_gpio_init);
diff -urN a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c
--- a/arch/mips/rb532/irq.c 2008-11-07 18:55:34.000000000 +0100
+++ b/arch/mips/rb532/irq.c 2008-11-15 17:43:28.000000000 +0100
@@ -45,7 +45,7 @@
#include <asm/mipsregs.h>
#include <asm/system.h>
-#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/irq.h>
struct intr_group {
u32 mask; /* mask of valid bits in pending/mask registers */
diff -urN a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c
--- a/arch/mips/rb532/prom.c 2008-11-07 18:55:34.000000000 +0100
+++ b/arch/mips/rb532/prom.c 2008-11-15 17:43:28.000000000 +0100
@@ -37,12 +37,8 @@
#include <asm/mach-rc32434/ddr.h>
#include <asm/mach-rc32434/prom.h>
-extern void __init setup_serial_port(void);
-
unsigned int idt_cpu_freq = 132000000;
EXPORT_SYMBOL(idt_cpu_freq);
-unsigned int gpio_bootup_state;
-EXPORT_SYMBOL(gpio_bootup_state);
static struct resource ddr_reg[] = {
{
@@ -108,9 +104,6 @@
mips_machtype = MACH_MIKROTIK_RB532;
}
- if (match_tag(prom_argv[i], GPIO_TAG))
- gpio_bootup_state = tag2ul(prom_argv[i], GPIO_TAG);
-
strcpy(cp, prom_argv[i]);
cp += strlen(prom_argv[i]);
}
@@ -122,11 +115,6 @@
strcpy(cp, arcs_cmdline);
cp += strlen(arcs_cmdline);
}
- if (gpio_bootup_state & 0x02)
- strcpy(cp, GPIO_INIT_NOBUTTON);
- else
- strcpy(cp, GPIO_INIT_BUTTON);
-
cmd_line[CL_SIZE-1] = '\0';
strcpy(arcs_cmdline, cmd_line);
diff -urN a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c
--- a/arch/mips/rb532/serial.c 2008-11-07 18:55:34.000000000 +0100
+++ b/arch/mips/rb532/serial.c 2008-11-15 17:43:28.000000000 +0100
@@ -31,16 +31,16 @@
#include <linux/serial_8250.h>
#include <asm/serial.h>
-#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/rb.h>
extern unsigned int idt_cpu_freq;
static struct uart_port rb532_uart = {
.type = PORT_16550A,
.line = 0,
- .irq = RC32434_UART0_IRQ,
+ .irq = UART0_IRQ,
.iotype = UPIO_MEM,
- .membase = (char *)KSEG1ADDR(RC32434_UART0_BASE),
+ .membase = (char *)KSEG1ADDR(REGBASE + UART0BASE),
.regshift = 2
};
diff -urN a/arch/mips/rb532/setup.c b/arch/mips/rb532/setup.c
--- a/arch/mips/rb532/setup.c 2008-11-07 18:55:34.000000000 +0100
+++ b/arch/mips/rb532/setup.c 2008-11-15 17:43:28.000000000 +0100
@@ -9,7 +9,7 @@
#include <asm/time.h>
#include <linux/ioport.h>
-#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/rb.h>
#include <asm/mach-rc32434/pci.h>
struct pci_reg __iomem *pci_reg;
@@ -27,7 +27,7 @@
static void rb_machine_restart(char *command)
{
/* just jump to the reset vector */
- writel(0x80000001, (void *)KSEG1ADDR(RC32434_REG_BASE + RC32434_RST));
+ writel(0x80000001, IDT434_REG_BASE + RST);
((void (*)(void)) KSEG1ADDR(0x1FC00000u))();
}
diff -urN a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c
--- a/arch/mips/rb532/time.c 2008-11-07 18:55:34.000000000 +0100
+++ b/arch/mips/rb532/time.c 2008-11-15 17:43:28.000000000 +0100
@@ -28,7 +28,6 @@
#include <linux/timex.h>
#include <asm/mipsregs.h>
-#include <asm/debug.h>
#include <asm/time.h>
#include <asm/mach-rc32434/rc32434.h>
diff -urN linux-2.6.27.5/arch/mips/Kconfig linux-2.6.27.5.new/arch/mips/Kconfig
--- linux-2.6.27.5/arch/mips/Kconfig 2008-11-07 18:55:34.000000000 +0100
+++ linux-2.6.27.5.new/arch/mips/Kconfig 2008-11-15 17:50:42.000000000 +0100
@@ -568,7 +568,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
select SWAP_IO_SPACE
select BOOT_RAW
- select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
help
Support the Mikrotik(tm) RouterBoard 532 series,
based on the IDT RC32434 SoC.
diff -urN a/include/asm-mips/mach-rc32434/gpio.h b/include-mips/asm/mach-rc32434/gpio.h
--- a/include/asm-mips/mach-rc32434/gpio.h 2008-11-07 18:55:34.000000000 +0100
+++ b/include/asm-mips/mach-rc32434/gpio.h 2008-11-15 17:43:28.000000000 +0100
@@ -14,6 +14,16 @@
#define _RC32434_GPIO_H_
#include <linux/types.h>
+#include <asm-generic/gpio.h>
+
+#define NR_BUILTIN_GPIO 32
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+
+#define gpio_to_irq(gpio) (8 + 4 * 32 + gpio)
+#define irq_to_gpio(irq) (irq - (8 + 4 * 32))
struct rb532_gpio_reg {
u32 gpiofunc; /* GPIO Function Register
@@ -61,66 +71,20 @@
/* PCI messaging unit */
#define RC32434_PCI_MSU_GPIO (1 << 13)
+/* NAND GPIO signals */
+#define GPIO_RDY 8
+#define GPIO_WPX 9
+#define GPIO_ALE 10
+#define GPIO_CLE 11
+
+/* Compact Flash GPIO pin */
+#define CF_GPIO_NUM 13
extern void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val);
extern unsigned get_434_reg(unsigned reg_offs);
extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask);
extern unsigned char get_latch_u5(void);
-
-extern int rb532_gpio_get_value(unsigned gpio);
-extern void rb532_gpio_set_value(unsigned gpio, int value);
-extern int rb532_gpio_direction_input(unsigned gpio);
-extern int rb532_gpio_direction_output(unsigned gpio, int value);
-extern void rb532_gpio_set_int_level(unsigned gpio, int value);
-extern int rb532_gpio_get_int_level(unsigned gpio);
-extern void rb532_gpio_set_int_status(unsigned gpio, int value);
-extern int rb532_gpio_get_int_status(unsigned gpio);
-
-
-/* Wrappers for the arch-neutral GPIO API */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- /* Not yet implemented */
- return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
- /* Not yet implemented */
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
- return rb532_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
- return rb532_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return rb532_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- rb532_gpio_set_value(gpio, value);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return gpio;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return irq;
-}
-
-/* For cansleep */
-#include <asm-generic/gpio.h>
+extern void rb532_gpio_set_ilevel(int bit, unsigned gpio);
+extern void rb532_gpio_set_istat(int bit, unsigned gpio);
#endif /* _RC32434_GPIO_H_ */
diff -urN a/include/asm-mips/mach-rc32434/irq.h b/include/asm-mips/mach-rc32434/irq.h
--- a/include/asm-mips/mach-rc32434/irq.h 2008-11-07 18:55:34.000000000 +0100
+++ b/include/asm-mips/mach-rc32434/irq.h 2008-11-15 17:43:28.000000000 +0100
@@ -4,5 +4,30 @@
#define NR_IRQS 256
#include <asm/mach-generic/irq.h>
+#include <asm/mach-rc32434/rb.h>
+
+/* Interrupt Controller */
+#define IC_GROUP0_PEND (REGBASE + 0x38000)
+#define IC_GROUP0_MASK (REGBASE + 0x38008)
+#define IC_GROUP_OFFSET 0x0C
+
+#define NUM_INTR_GROUPS 5
+
+/* 16550 UARTs */
+#define GROUP0_IRQ_BASE 8 /* GRP2 IRQ numbers start here */
+ /* GRP3 IRQ numbers start here */
+#define GROUP1_IRQ_BASE (GROUP0_IRQ_BASE + 32)
+ /* GRP4 IRQ numbers start here */
+#define GROUP2_IRQ_BASE (GROUP1_IRQ_BASE + 32)
+ /* GRP5 IRQ numbers start here */
+#define GROUP3_IRQ_BASE (GROUP2_IRQ_BASE + 32)
+#define GROUP4_IRQ_BASE (GROUP3_IRQ_BASE + 32)
+
+#define UART0_IRQ (GROUP3_IRQ_BASE + 0)
+
+#define ETH0_DMA_RX_IRQ (GROUP1_IRQ_BASE + 0)
+#define ETH0_DMA_TX_IRQ (GROUP1_IRQ_BASE + 1)
+#define ETH0_RX_OVR_IRQ (GROUP3_IRQ_BASE + 9)
+#define ETH0_TX_UND_IRQ (GROUP3_IRQ_BASE + 10)
#endif /* __ASM_RC32434_IRQ_H */
diff -urN a/include/asm-mips/mach-rc32434/prom.h b/include/asm-mips/mach-rc32434/prom.h
--- a/include/asm-mips/mach-rc32434/prom.h 2008-11-07 18:55:34.000000000 +0100
+++ b/include/asm-mips/mach-rc32434/prom.h 2008-11-15 17:43:28.000000000 +0100
@@ -28,14 +28,10 @@
#define PROM_ENTRY(x) (0xbfc00000 + ((x) * 8))
-#define GPIO_INIT_NOBUTTON ""
-#define GPIO_INIT_BUTTON " 2"
-
#define SR_NMI 0x00180000
#define SERIAL_SPEED_ENTRY 0x00000001
#define FREQ_TAG "HZ="
-#define GPIO_TAG "gpio="
#define KMAC_TAG "kmac="
#define MEM_TAG "mem="
#define BOARD_TAG "board="
diff -urN a/include/asm-mips/mach-rc32434/rb.h b/include/asm-mips/mach-rc32434/rb.h
--- a/include/asm-mips/mach-rc32434/rb.h 2008-11-07 18:55:34.000000000 +0100
+++ b/include/asm-mips/mach-rc32434/rb.h 2008-11-15 17:43:28.000000000 +0100
@@ -17,7 +17,10 @@
#include <linux/genhd.h>
-#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(0x18000000))
+#define REGBASE 0x18000000
+#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(REGBASE))
+#define UART0BASE 0x58000
+#define RST (1 << 15)
#define DEV0BASE 0x010000
#define DEV0MASK 0x010004
#define DEV0C 0x010008
@@ -37,12 +40,14 @@
#define BTCS 0x010040
#define BTCOMPARE 0x010044
#define GPIOBASE 0x050000
-#define GPIOCFG 0x050004
-#define GPIOD 0x050008
-#define GPIOILEVEL 0x05000C
-#define GPIOISTAT 0x050010
-#define GPIONMIEN 0x050014
-#define IMASK6 0x038038
+/* Offsets relative to GPIOBASE */
+#define GPIOFUNC 0x00
+#define GPIOCFG 0x04
+#define GPIOD 0x08
+#define GPIOILEVEL 0x0C
+#define GPIOISTAT 0x10
+#define GPIONMIEN 0x14
+#define IMASK6 0x38
#define LO_WPX (1 << 0)
#define LO_ALE (1 << 1)
#define LO_CLE (1 << 2)
diff -urN a/include/asm-mips/mach-rc32434/rc32434.h b/include/asm-mips/mach-rc32434/rc32434.h
--- a/include/asm-mips/mach-rc32434/rc32434.h 2008-11-07 18:55:34.000000000 +0100
+++ b/include/asm-mips/mach-rc32434/rc32434.h 2008-11-15 17:43:28.000000000 +0100
@@ -8,37 +8,7 @@
#include <linux/delay.h>
#include <linux/io.h>
-#define RC32434_REG_BASE 0x18000000
-#define RC32434_RST (1 << 15)
-
#define IDT_CLOCK_MULT 2
-#define MIPS_CPU_TIMER_IRQ 7
-
-/* Interrupt Controller */
-#define IC_GROUP0_PEND (RC32434_REG_BASE + 0x38000)
-#define IC_GROUP0_MASK (RC32434_REG_BASE + 0x38008)
-#define IC_GROUP_OFFSET 0x0C
-
-#define NUM_INTR_GROUPS 5
-
-/* 16550 UARTs */
-#define GROUP0_IRQ_BASE 8 /* GRP2 IRQ numbers start here */
- /* GRP3 IRQ numbers start here */
-#define GROUP1_IRQ_BASE (GROUP0_IRQ_BASE + 32)
- /* GRP4 IRQ numbers start here */
-#define GROUP2_IRQ_BASE (GROUP1_IRQ_BASE + 32)
- /* GRP5 IRQ numbers start here */
-#define GROUP3_IRQ_BASE (GROUP2_IRQ_BASE + 32)
-#define GROUP4_IRQ_BASE (GROUP3_IRQ_BASE + 32)
-
-
-#ifdef __MIPSEB__
-#define RC32434_UART0_BASE (RC32434_REG_BASE + 0x58003)
-#else
-#define RC32434_UART0_BASE (RC32434_REG_BASE + 0x58000)
-#endif
-
-#define RC32434_UART0_IRQ (GROUP3_IRQ_BASE + 0)
/* cpu pipeline flush */
static inline void rc32434_sync(void)
@@ -46,16 +16,4 @@
__asm__ volatile ("sync");
}
-static inline void rc32434_sync_udelay(int us)
-{
- __asm__ volatile ("sync");
- udelay(us);
-}
-
-static inline void rc32434_sync_delay(int ms)
-{
- __asm__ volatile ("sync");
- mdelay(ms);
-}
-
#endif /* _ASM_RC32434_RC32434_H_ */
--- a/arch/mips/pci/fixup-rc32434.c 2008-11-07 18:55:34.000000000 +0100
+++ b/arch/mips/pci/fixup-rc32434.c 2008-11-15 17:43:28.000000000 +0100
@@ -30,6 +30,7 @@
#include <linux/init.h>
#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/irq.h>
static int __devinitdata irq_map[2][12] = {
{0, 0, 2, 3, 2, 3, 0, 0, 0, 0, 0, 1},

42
target/linux/rb532/patches-2.6.27/002-pci_io_map_base.patch
View File

@ -1,42 +0,0 @@
The code is rather based on trial-and-error than knowledge. Verified Via
Rhine functionality in PIO as well as MMIO mode.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Tested-by: Florian Fainelli <florian@openwrt.org>
---
arch/mips/pci/pci-rc32434.c | 11 +++++++++++
1 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c
index 1c2821e..71f7d27 100644
--- a/arch/mips/pci/pci-rc32434.c
+++ b/arch/mips/pci/pci-rc32434.c
@@ -205,6 +205,8 @@ static int __init rc32434_pcibridge_init(void)
static int __init rc32434_pci_init(void)
{
+ void __iomem *io_map_base;
+
pr_info("PCI: Initializing PCI\n");
ioport_resource.start = rc32434_res_pci_io1.start;
@@ -212,6 +214,15 @@ static int __init rc32434_pci_init(void)
rc32434_pcibridge_init();
+ io_map_base = ioremap(rc32434_res_pci_io1.start,
+ rc32434_res_pci_io1.end - rc32434_res_pci_io1.start + 1);
+
+ if (!io_map_base)
+ return -ENOMEM;
+
+ rc32434_controller.io_map_base =
+ (unsigned long)io_map_base - rc32434_res_pci_io1.start;
+
register_pci_controller(&rc32434_controller);
rc32434_sync();
--
1.5.6.4

35
target/linux/rb532/patches-2.6.27/003-gpio_bit_setting.patch
View File

@ -1,35 +0,0 @@
The algorithm works unconditionally. If bitval is one, the first line is
a no op and the second line sets the bit at offset position. Vice versa,
if bitval is zero, the first line clears the bit at offset position and
the second line is a no op.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
arch/mips/rb532/gpio.c | 6 ++----
1 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index 0e84c8a..e35cb75 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -119,13 +119,11 @@ static inline void rb532_set_bit(unsigned bitval,
unsigned long flags;
u32 val;
- bitval = !!bitval; /* map parameter to {0,1} */
-
local_irq_save(flags);
val = readl(ioaddr);
- val &= ~( ~bitval << offset ); /* unset bit if bitval == 0 */
- val |= ( bitval << offset ); /* set bit if bitval == 1 */
+ val &= ~(!bitval << offset); /* unset bit if bitval == 0 */
+ val |= (!!bitval << offset); /* set bit if bitval == 1 */
writel(val, ioaddr);
local_irq_restore(flags);
--
1.5.6.4

84
target/linux/rb532/patches-2.6.27/004-fix_pata_rb532_cf.patch
View File

@ -1,84 +0,0 @@
After applying the following changes I could verify functionality by
mounting a filesystem on the cfdisk and reading/writing files in it.
The set_irq_type() function must be wrong, as there is no set_type()
function defined for the rb532 IRQ chip. But as the used IRQ actually is
being triggered by a GPIO, setting it's interrupt level should be the
right alternative. Also to clear a GPIO triggered IRQ, the source has to
be cleared. This is being done at the end of rb532_pata_irq_handler.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
---
drivers/ata/pata_rb532_cf.c | 15 ++++++++++-----
1 files changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index f8b3ffc..7b11f40 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -31,6 +31,7 @@
#include <scsi/scsi_host.h>
#include <asm/gpio.h>
+#include <asm/mach-rc32434/gpio.h>
#define DRV_NAME "pata-rb532-cf"
#define DRV_VERSION "0.1.0"
@@ -39,7 +40,8 @@
#define RB500_CF_MAXPORTS 1
#define RB500_CF_IO_DELAY 400
-#define RB500_CF_REG_CMD 0x0800
+#define RB500_CF_REG_BASE 0x0800
+#define RB500_CF_REG_ERR 0x080D
#define RB500_CF_REG_CTRL 0x080E
#define RB500_CF_REG_DATA 0x0C00
@@ -62,7 +64,7 @@ static inline void rb532_pata_finish_io(struct ata_port *ap)
ata_sff_dma_pause(ap);
ndelay(RB500_CF_IO_DELAY);
- set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
+ rb532_gpio_set_ilevel(1, info->gpio_line);
}
static void rb532_pata_exec_command(struct ata_port *ap,
@@ -109,13 +111,15 @@ static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance)
struct rb532_cf_info *info = ah->private_data;
if (gpio_get_value(info->gpio_line)) {
- set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
+ rb532_gpio_set_ilevel(0, info->gpio_line);
if (!info->frozen)
ata_sff_interrupt(info->irq, dev_instance);
} else {
- set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
+ rb532_gpio_set_ilevel(1, info->gpio_line);
}
+ rb532_gpio_set_istat(0, info->gpio_line);
+
return IRQ_HANDLED;
}
@@ -146,13 +150,14 @@ static void rb532_pata_setup_ports(struct ata_host *ah)
ap->pio_mask = 0x1f; /* PIO4 */
ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
- ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_CMD;
+ ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_BASE;
ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL;
ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
ata_sff_std_ports(&ap->ioaddr);
ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DATA;
+ ap->ioaddr.error_addr = info->iobase + RB500_CF_REG_ERR;
}
static __devinit int rb532_pata_driver_probe(struct platform_device *pdev)
--
1.5.6.4

68
target/linux/rb532/patches-2.6.27/005-pata_rb532_cf_4bytes_rw.patch
View File

@ -1,68 +0,0 @@
* rename the offset definition to avoid abiguity with the standard ATA
IO address
* read and write four bytes at once like the original driver does
* use writesl() and readsl() which implicitly iterate over the data
This patch assumes buflen to be a multiple of four, which is true for
ATA devices. ATAPI support is not known, though unlikely, as the
original driver always transfers 512 Bytes at once.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Acked-by: Sergei Shtyltov <sshtylyov@ru.mvista.com>
---
drivers/ata/pata_rb532_cf.c | 20 +++++++++-----------
1 files changed, 9 insertions(+), 11 deletions(-)
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index 7b11f40..b919012 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -43,7 +43,8 @@
#define RB500_CF_REG_BASE 0x0800
#define RB500_CF_REG_ERR 0x080D
#define RB500_CF_REG_CTRL 0x080E
-#define RB500_CF_REG_DATA 0x0C00
+/* 32bit buffered data register offset */
+#define RB500_CF_REG_DBUF32 0x0C00
struct rb532_cf_info {
void __iomem *iobase;
@@ -74,19 +75,16 @@ static void rb532_pata_exec_command(struct ata_port *ap,
rb532_pata_finish_io(ap);
}
-static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
- unsigned int buflen, int write_data)
+static void rb532_pata_data_xfer(struct ata_device *adev,
+ unsigned char *buf, unsigned int buflen, int write_data)
{
struct ata_port *ap = adev->link->ap;
void __iomem *ioaddr = ap->ioaddr.data_addr;
- if (write_data) {
- for (; buflen > 0; buflen--, buf++)
- writeb(*buf, ioaddr);
- } else {
- for (; buflen > 0; buflen--, buf++)
- *buf = readb(ioaddr);
- }
+ if (write_data)
+ writesl(ioaddr, buf, buflen / sizeof(u32));
+ else
+ readsl(ioaddr, buf, buflen / sizeof(u32));
rb532_pata_finish_io(adev->link->ap);
}
@@ -156,7 +154,7 @@ static void rb532_pata_setup_ports(struct ata_host *ah)
ata_sff_std_ports(&ap->ioaddr);
- ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DATA;
+ ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DBUF32;
ap->ioaddr.error_addr = info->iobase + RB500_CF_REG_ERR;
}
--
1.5.6.4

35
target/linux/rb532/patches-2.6.27/006-pata_rb532_cf_fix_prototype.patch
View File

@ -1,35 +0,0 @@
Per definition, this function should return the number of bytes
consumed. Also take care of the unlikely case when buflen is not a
multiple of four; while transferring, the division cuts the remaining
bytes, so alter the return value accordingly.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/ata/pata_rb532_cf.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index b919012..95a0d66 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -75,7 +75,7 @@ static void rb532_pata_exec_command(struct ata_port *ap,
rb532_pata_finish_io(ap);
}
-static void rb532_pata_data_xfer(struct ata_device *adev,
+static unsigned int rb532_pata_data_xfer(struct ata_device *adev,
unsigned char *buf, unsigned int buflen, int write_data)
{
struct ata_port *ap = adev->link->ap;
@@ -87,6 +87,7 @@ static void rb532_pata_data_xfer(struct ata_device *adev,
readsl(ioaddr, buf, buflen / sizeof(u32));
rb532_pata_finish_io(adev->link->ap);
+ return buflen - (buflen % sizeof(u32));
}
static void rb532_pata_freeze(struct ata_port *ap)
--
1.5.6.4

15
target/linux/rb532/patches-2.6.27/007-cmdline_hack.patch
View File

@ -1,15 +0,0 @@
diff -urN linux-2.6.27.5/arch/mips/kernel/head.S linux-2.6.27.5.new/arch/mips/kernel/head.S
--- linux-2.6.27.5/arch/mips/kernel/head.S 2008-11-15 19:24:03.000000000 +0100
+++ linux-2.6.27.5.new/arch/mips/kernel/head.S 2008-11-15 19:24:55.000000000 +0100
@@ -123,6 +123,11 @@
j kernel_entry
nop
+
+
+EXPORT(_image_cmdline)
+ .ascii "CMDLINE:"
+
#ifndef CONFIG_NO_EXCEPT_FILL
/*
* Reserved space for exception handlers.

31
target/linux/rb532/patches-2.6.27/008-korina_reset_resource_buffer_size_1536.patch
View File

@ -1,31 +0,0 @@
The new value is the one used in the external patch before and allows at
least a standard MTU of 1500 to be handled correctly. Impact of this
change gets visible when bigger packets are to be received, issuing:
| ping -s 492 <IP>
and bigger payload sized led to 100% packet loss.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/net/korina.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index fefb33d..e30c2f4 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -84,7 +84,10 @@
#define KORINA_NUM_RDS 64 /* number of receive descriptors */
#define KORINA_NUM_TDS 64 /* number of transmit descriptors */
-#define KORINA_RBSIZE 536 /* size of one resource buffer = Ether MTU */
+/* KORINA_RBSIZE is the hardware's default maximum receive
+ * frame size in bytes. Having this hardcoded means that there
+ * is no support for MTU sizes greater than 1500. */
+#define KORINA_RBSIZE 1536 /* size of one resource buffer = Ether MTU */
#define KORINA_RDS_MASK (KORINA_NUM_RDS - 1)
#define KORINA_TDS_MASK (KORINA_NUM_TDS - 1)
#define RD_RING_SIZE (KORINA_NUM_RDS * sizeof(struct dma_desc))
--
1.5.6.4

33
target/linux/rb532/patches-2.6.27/009-korina_disable_napi_on_close_and_restart.patch
View File

@ -1,33 +0,0 @@
Without this the driver will crash when the NIC is being restarted.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/net/korina.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index e30c2f4..65b8487 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -904,6 +904,8 @@ static int korina_restart(struct net_device *dev)
korina_free_ring(dev);
+ napi_disable(&lp->napi);
+
ret = korina_init(dev);
if (ret < 0) {
printk(KERN_ERR DRV_NAME "%s: cannot restart device\n",
@@ -1070,6 +1072,8 @@ static int korina_close(struct net_device *dev)
korina_free_ring(dev);
+ napi_disable(&lp->napi);
+
free_irq(lp->rx_irq, dev);
free_irq(lp->tx_irq, dev);
free_irq(lp->ovr_irq, dev);
--
1.5.6.4

138
target/linux/rb532/patches-2.6.27/010-korina_rework_korina_rx.patch
View File

@ -1,138 +0,0 @@
This function needs an early exit condition to function properly, or
else caller assumes napi workload wasn't enough to handle all received
packets and korina_rx is called again (and again and again and ...).
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
--- a/drivers/net/korina.c 2009-01-19 23:19:10.000000000 +0100
+++ b/drivers/net/korina.c 2009-01-19 23:25:31.000000000 +0100
@@ -353,15 +353,20 @@
struct dma_desc *rd = &lp->rd_ring[lp->rx_next_done];
struct sk_buff *skb, *skb_new;
u8 *pkt_buf;
- u32 devcs, pkt_len, dmas, rx_free_desc;
+ u32 devcs, pkt_len, dmas;
int count;
dma_cache_inv((u32)rd, sizeof(*rd));
for (count = 0; count < limit; count++) {
+ skb = lp->rx_skb[lp->rx_next_done];
+ skb_new = NULL;
devcs = rd->devcs;
+ if ((KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) == 0)
+ break;
+
/* Update statistics counters */
if (devcs & ETH_RX_CRC)
dev->stats.rx_crc_errors++;
@@ -384,64 +389,53 @@
* in Rc32434 (errata ref #077) */
dev->stats.rx_errors++;
dev->stats.rx_dropped++;
- }
-
- while ((rx_free_desc = KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) != 0) {
- /* init the var. used for the later
- * operations within the while loop */
- skb_new = NULL;
+ } else if ((devcs & ETH_RX_ROK)) {
pkt_len = RCVPKT_LENGTH(devcs);
- skb = lp->rx_skb[lp->rx_next_done];
+ /* must be the (first and) last
+ * descriptor then */
+ pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
+
+ /* invalidate the cache */
+ dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
+
+ /* Malloc up new buffer. */
+ skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
+
+ if (!skb_new)
+ break;
+ /* Do not count the CRC */
+ skb_put(skb, pkt_len - 4);
+ skb->protocol = eth_type_trans(skb, dev);
+
+ /* Pass the packet to upper layers */
+ netif_receive_skb(skb);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
+
+ /* Update the mcast stats */
+ if (devcs & ETH_RX_MP)
+ dev->stats.multicast++;
- if ((devcs & ETH_RX_ROK)) {
- /* must be the (first and) last
- * descriptor then */
- pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
-
- /* invalidate the cache */
- dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
-
- /* Malloc up new buffer. */
- skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
-
- if (!skb_new)
- break;
- /* Do not count the CRC */
- skb_put(skb, pkt_len - 4);
- skb->protocol = eth_type_trans(skb, dev);
-
- /* Pass the packet to upper layers */
- netif_receive_skb(skb);
- dev->last_rx = jiffies;
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += pkt_len;
-
- /* Update the mcast stats */
- if (devcs & ETH_RX_MP)
- dev->stats.multicast++;
-
- lp->rx_skb[lp->rx_next_done] = skb_new;
- }
-
- rd->devcs = 0;
-
- /* Restore descriptor's curr_addr */
- if (skb_new)
- rd->ca = CPHYSADDR(skb_new->data);
- else
- rd->ca = CPHYSADDR(skb->data);
+ lp->rx_skb[lp->rx_next_done] = skb_new;
+ }
+ rd->devcs = 0;
+
+ /* Restore descriptor's curr_addr */
+ if (skb_new)
+ rd->ca = CPHYSADDR(skb_new->data);
+ else
+ rd->ca = CPHYSADDR(skb->data);
- rd->control = DMA_COUNT(KORINA_RBSIZE) |
+ rd->control = DMA_COUNT(KORINA_RBSIZE) |
DMA_DESC_COD | DMA_DESC_IOD;
- lp->rd_ring[(lp->rx_next_done - 1) &
- KORINA_RDS_MASK].control &=
- ~DMA_DESC_COD;
-
- lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
- dma_cache_wback((u32)rd, sizeof(*rd));
- rd = &lp->rd_ring[lp->rx_next_done];
- writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
- }
+ lp->rd_ring[(lp->rx_next_done - 1) &
+ KORINA_RDS_MASK].control &=
+ ~DMA_DESC_COD;
+
+ lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
+ dma_cache_wback((u32)rd, sizeof(*rd));
+ rd = &lp->rd_ring[lp->rx_next_done];
+ writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
}
dmas = readl(&lp->rx_dma_regs->dmas);

18
target/linux/rb532/patches-2.6.27/011-korina_do_schedule_napi_after_testing_it.patch
View File

@ -1,18 +0,0 @@
The called netif_rx_schedule() does all the work for us:
- it checks the return value of netif_rx_schedule_prep() and
- if everything is ok calls __netif_rx_schedule().
Before this change, the driver received absolutely nothing.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
--- a/drivers/net/korina.c 2009-01-19 23:26:19.000000000 +0100
+++ b/drivers/net/korina.c 2009-01-19 23:27:06.000000000 +0100
@@ -330,7 +330,7 @@
dmas = readl(&lp->rx_dma_regs->dmas);
if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) {
- netif_rx_schedule_prep(dev, &lp->napi);
+ netif_rx_schedule(dev, &lp->napi);
dmasm = readl(&lp->rx_dma_regs->dmasm);
writel(dmasm | (DMA_STAT_DONE |

40
target/linux/rb532/patches-2.6.27/012-korina_do_tx_at_right_position.patch
View File

@ -1,40 +0,0 @@
Triggering TX before the write to the DMA status mask register leads to
transferring packets with maximum payload no matter what the actual
packet size is.
While here, also trigger RX scheduling after writing the DMA status mask
register, like it was in the original driver before it was sent
upstream.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
--- a/drivers/net/korina.c 2009-01-19 23:27:41.000000000 +0100
+++ b/drivers/net/korina.c 2009-01-19 23:29:08.000000000 +0100
@@ -330,12 +330,12 @@
dmas = readl(&lp->rx_dma_regs->dmas);
if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) {
- netif_rx_schedule(dev, &lp->napi);
-
dmasm = readl(&lp->rx_dma_regs->dmasm);
writel(dmasm | (DMA_STAT_DONE |
DMA_STAT_HALT | DMA_STAT_ERR),
&lp->rx_dma_regs->dmasm);
+
+ netif_rx_schedule(dev, &lp->napi);
if (dmas & DMA_STAT_ERR)
printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name);
@@ -621,11 +621,11 @@
dmas = readl(&lp->tx_dma_regs->dmas);
if (dmas & (DMA_STAT_FINI | DMA_STAT_ERR)) {
- korina_tx(dev);
-
dmasm = readl(&lp->tx_dma_regs->dmasm);
writel(dmasm | (DMA_STAT_FINI | DMA_STAT_ERR),
&lp->tx_dma_regs->dmasm);
+
+ korina_tx(dev);
if (lp->tx_chain_status == desc_filled &&
(readl(&(lp->tx_dma_regs->dmandptr)) == 0)) {

87
target/linux/rb532/patches-2.6.27/013-korina_fix_handling_tx_chain_tail.patch
View File

@ -1,87 +0,0 @@
Originally this must have been a rewrite error when introducing
'chain_index'. But the original driver did not use the previous chain
item everywhere: when altering the address tx_chain_tail points to, it
should move forward, not backwards.
Also this is not an "index" but rather the penultimate element in the
chain, so rename it accordingly.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/net/korina.c | 22 +++++++++++-----------
1 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index dced5e7..f200175 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -199,7 +199,7 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
struct korina_private *lp = netdev_priv(dev);
unsigned long flags;
u32 length;
- u32 chain_index;
+ u32 chain_prev, chain_next;
struct dma_desc *td;
spin_lock_irqsave(&lp->lock, flags);
@@ -231,8 +231,8 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
/* Setup the transmit descriptor. */
dma_cache_inv((u32) td, sizeof(*td));
td->ca = CPHYSADDR(skb->data);
- chain_index = (lp->tx_chain_tail - 1) &
- KORINA_TDS_MASK;
+ chain_prev = (lp->tx_chain_tail - 1) & KORINA_TDS_MASK;
+ chain_next = (lp->tx_chain_tail + 1) & KORINA_TDS_MASK;
if (readl(&(lp->tx_dma_regs->dmandptr)) == 0) {
if (lp->tx_chain_status == desc_empty) {
@@ -240,7 +240,7 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
td->control = DMA_COUNT(length) |
DMA_DESC_COF | DMA_DESC_IOF;
/* Move tail */
- lp->tx_chain_tail = chain_index;
+ lp->tx_chain_tail = chain_next;
/* Write to NDPTR */
writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
&lp->tx_dma_regs->dmandptr);
@@ -251,12 +251,12 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
td->control = DMA_COUNT(length) |
DMA_DESC_COF | DMA_DESC_IOF;
/* Link to prev */
- lp->td_ring[chain_index].control &=
+ lp->td_ring[chain_prev].control &=
~DMA_DESC_COF;
/* Link to prev */
- lp->td_ring[chain_index].link = CPHYSADDR(td);
+ lp->td_ring[chain_prev].link = CPHYSADDR(td);
/* Move tail */
- lp->tx_chain_tail = chain_index;
+ lp->tx_chain_tail = chain_next;
/* Write to NDPTR */
writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
&(lp->tx_dma_regs->dmandptr));
@@ -270,17 +270,17 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
td->control = DMA_COUNT(length) |
DMA_DESC_COF | DMA_DESC_IOF;
/* Move tail */
- lp->tx_chain_tail = chain_index;
+ lp->tx_chain_tail = chain_next;
lp->tx_chain_status = desc_filled;
netif_stop_queue(dev);
} else {
/* Update tail */
td->control = DMA_COUNT(length) |
DMA_DESC_COF | DMA_DESC_IOF;
- lp->td_ring[chain_index].control &=
+ lp->td_ring[chain_prev].control &=
~DMA_DESC_COF;
- lp->td_ring[chain_index].link = CPHYSADDR(td);
- lp->tx_chain_tail = chain_index;
+ lp->td_ring[chain_prev].link = CPHYSADDR(td);
+ lp->tx_chain_tail = chain_next;
}
}
dma_cache_wback((u32) td, sizeof(*td));
--
1.5.6.4

25
target/linux/rb532/patches-2.6.27/014-korina_do_not_stop_queue_here.patch
View File

@ -1,25 +0,0 @@
Apparently this doesn't make sense. Otherwise the queue gets disabled as
soon as it's getting empty and can only be resurrected by a driver
restart.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/net/korina.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index f200175..bd33fa9 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -272,7 +272,6 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
/* Move tail */
lp->tx_chain_tail = chain_next;
lp->tx_chain_status = desc_filled;
- netif_stop_queue(dev);
} else {
/* Update tail */
td->control = DMA_COUNT(length) |
--
1.5.6.4

53
target/linux/rb532/patches-2.6.27/015-korina_irqf_flags.patch
View File

@ -1,53 +0,0 @@
As the kernel warning states: "IRQF_DISABLED is not guaranteed on shared
IRQs". Since these IRQs' values are hardcoded and my test system doesn't
show any shared use of IRQs at all, rather make them non-shared than
non-disabled.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/net/korina.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index bd33fa9..1d6e48e 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -1000,14 +1000,14 @@ static int korina_open(struct net_device *dev)
* that handles the Done Finished
* Ovr and Und Events */
ret = request_irq(lp->rx_irq, &korina_rx_dma_interrupt,
- IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Rx", dev);
+ IRQF_DISABLED, "Korina ethernet Rx", dev);
if (ret < 0) {
printk(KERN_ERR DRV_NAME "%s: unable to get Rx DMA IRQ %d\n",
dev->name, lp->rx_irq);
goto err_release;
}
ret = request_irq(lp->tx_irq, &korina_tx_dma_interrupt,
- IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Tx", dev);
+ IRQF_DISABLED, "Korina ethernet Tx", dev);
if (ret < 0) {
printk(KERN_ERR DRV_NAME "%s: unable to get Tx DMA IRQ %d\n",
dev->name, lp->tx_irq);
@@ -1016,7 +1016,7 @@ static int korina_open(struct net_device *dev)
/* Install handler for overrun error. */
ret = request_irq(lp->ovr_irq, &korina_ovr_interrupt,
- IRQF_SHARED | IRQF_DISABLED, "Ethernet Overflow", dev);
+ IRQF_DISABLED, "Ethernet Overflow", dev);
if (ret < 0) {
printk(KERN_ERR DRV_NAME"%s: unable to get OVR IRQ %d\n",
dev->name, lp->ovr_irq);
@@ -1025,7 +1025,7 @@ static int korina_open(struct net_device *dev)
/* Install handler for underflow error. */
ret = request_irq(lp->und_irq, &korina_und_interrupt,
- IRQF_SHARED | IRQF_DISABLED, "Ethernet Underflow", dev);
+ IRQF_DISABLED, "Ethernet Underflow", dev);
if (ret < 0) {
printk(KERN_ERR DRV_NAME "%s: unable to get UND IRQ %d\n",
dev->name, lp->und_irq);
--
1.5.6.4

34
target/linux/rb532/patches-2.6.27/016-korina_drop_left_over_assignment.patch
View File

@ -1,34 +0,0 @@
As the assigned value is being overwritten shortly after, it can be
dropped and so the whole variable definition moved to the start of the
function.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/net/korina.c | 3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index 60ae7bf..75010ca 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -743,6 +743,7 @@ static struct ethtool_ops netdev_ethtool_ops = {
static void korina_alloc_ring(struct net_device *dev)
{
struct korina_private *lp = netdev_priv(dev);
+ struct sk_buff *skb;
int i;
/* Initialize the transmit descriptors */
@@ -758,8 +759,6 @@ static void korina_alloc_ring(struct net_device *dev)
/* Initialize the receive descriptors */
for (i = 0; i < KORINA_NUM_RDS; i++) {
- struct sk_buff *skb = lp->rx_skb[i];
-
skb = dev_alloc_skb(KORINA_RBSIZE + 2);
if (!skb)
break;
--
1.5.6.4

36
target/linux/rb532/patches-2.6.27/017-korina_fix_loop_back_rx_desc.patch
View File

@ -1,36 +0,0 @@
After the last loop iteration, i has the value RC32434_NUM_RDS and
therefore leads to an index overflow when used afterwards to address the
last element. This is yet another another bug introduced when rewriting
parts of the driver for upstream preparation, as the original driver
used 'RC32434_NUM_RDS - 1' instead.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/net/korina.c | 9 +++++----
1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index 1d6e48e..67fbdf4 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -769,11 +769,12 @@ static void korina_alloc_ring(struct net_device *dev)
lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]);
}
- /* loop back */
- lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[0]);
- lp->rx_next_done = 0;
+ /* loop back receive descriptors, so the last
+ * descriptor points to the first one */
+ lp->rd_ring[i - 1].link = CPHYSADDR(&lp->rd_ring[0]);
+ lp->rd_ring[i - 1].control |= DMA_DESC_COD;
- lp->rd_ring[i].control |= DMA_DESC_COD;
+ lp->rx_next_done = 0;
lp->rx_chain_head = 0;
lp->rx_chain_tail = 0;
lp->rx_chain_status = desc_empty;
--
1.5.6.4

28
target/linux/rb532/patches-2.6.27/018-korina_adjust_headroom.patch
View File

@ -1,28 +0,0 @@
This is copy and paste from the original driver. As skb_reserve() is
also called within korina_alloc_ring() when initially allocating the
receive descriptors, the same should be done when allocating new space
after passing an skb to upper layers.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/net/korina.c | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index 67fbdf4..60ae7bf 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -416,6 +416,9 @@ static int korina_rx(struct net_device *dev, int limit)
if (devcs & ETH_RX_MP)
dev->stats.multicast++;
+ /* 16 bit align */
+ skb_reserve(skb_new, 2);
+
lp->rx_skb[lp->rx_next_done] = skb_new;
}
--
1.5.6.4

33
target/linux/rb532/patches-2.6.27/019-korina_set_dev_field_allocated_skb.patch
View File

@ -1,33 +0,0 @@
I'm not sure if this is necessary, but the original driver did it and
apparently also many other drivers do it, so it should not be completely
wrong to do it.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/net/korina.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index 75010ca..56b4db2 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -419,6 +419,7 @@ static int korina_rx(struct net_device *dev, int limit)
/* 16 bit align */
skb_reserve(skb_new, 2);
+ skb_new->dev = dev;
lp->rx_skb[lp->rx_next_done] = skb_new;
}
@@ -763,6 +764,7 @@ static void korina_alloc_ring(struct net_device *dev)
if (!skb)
break;
skb_reserve(skb, 2);
+ skb->dev = dev;
lp->rx_skb[i] = skb;
lp->rd_ring[i].control = DMA_DESC_IOD |
DMA_COUNT(KORINA_RBSIZE);
--
1.5.6.4

12
target/linux/rb532/patches-2.6.27/020-rc32434_res_name.patch
View File

@ -1,12 +0,0 @@
diff -urN linux-2.6.27.5/drivers/watchdog/rc32434_wdt.c linux-2.6.27.5.new/drivers/watchdog/rc32434_wdt.c
--- linux-2.6.27.5/drivers/watchdog/rc32434_wdt.c 2008-11-07 18:55:34.000000000 +0100
+++ linux-2.6.27.5.new/drivers/watchdog/rc32434_wdt.c 2008-11-15 22:06:28.000000000 +0100
@@ -261,7 +261,7 @@
int ret;
struct resource *r;
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb500_wdt_res");
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb532_wdt_res");
if (!r) {
printk(KERN_ERR KBUILD_MODNAME
"failed to retrieve resources\n");

26
target/linux/rb532/patches-2.6.27/021-rb532_driver_data.patch
View File

@ -1,26 +0,0 @@
As the korina ethernet driver uses platform_get_drvdata() to extract the
driver specific data from the platform device, driver_data has to be
used here.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
arch/mips/rb532/devices.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
index 9b6b744..3c74561 100644
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -89,7 +89,7 @@ static struct korina_device korina_dev0_data = {
static struct platform_device korina_dev0 = {
.id = -1,
.name = "korina",
- .dev.platform_data = &korina_dev0_data,
+ .dev.driver_data = &korina_dev0_data,
.resource = korina_dev0_res,
.num_resources = ARRAY_SIZE(korina_dev0_res),
};
--
1.5.6.4

91
target/linux/rb532/patches-2.6.27/022-rb532_uart_autodetect.patch
View File

@ -1,91 +0,0 @@
Auto-detection works just fine, so use it instead of specifying the type
manually. Also define a platform device for the uart, as suggested by
David Daney.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
arch/mips/rb532/devices.c | 26 ++++++++++++++++++++++++++
arch/mips/rb532/serial.c | 2 +-
2 files changed, 27 insertions(+), 1 deletions(-)
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
index c1c2918..9b6b744 100644
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -24,6 +24,7 @@
#include <linux/mtd/partitions.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
+#include <linux/serial_8250.h>
#include <asm/bootinfo.h>
@@ -39,6 +40,8 @@
#define ETH0_RX_DMA_ADDR (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
#define ETH0_TX_DMA_ADDR (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
+extern unsigned int idt_cpu_freq;
+
static struct resource korina_dev0_res[] = {
{
.name = "korina_regs",
@@ -214,12 +217,32 @@ static struct platform_device rb532_wdt = {
.num_resources = ARRAY_SIZE(rb532_wdt_res),
};
+static struct plat_serial8250_port rb532_uart_res[] = {
+ {
+ .membase = (char *)KSEG1ADDR(REGBASE + UART0BASE),
+ .irq = UART0_IRQ,
+ .regshift = 2,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF,
+ },
+ {
+ .flags = 0,
+ }
+};
+
+static struct platform_device rb532_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev.platform_data = &rb532_uart_res,
+};
+
static struct platform_device *rb532_devs[] = {
&korina_dev0,
&nand_slot0,
&cf_slot0,
&rb532_led,
&rb532_button,
+ &rb532_uart,
&rb532_wdt
};
@@ -294,6 +317,9 @@ static int __init plat_setup_devices(void)
/* Initialise the NAND device */
rb532_nand_setup();
+ /* set the uart clock to the current cpu frequency */
+ rb532_uart_res[0].uartclk = idt_cpu_freq;
+
return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs));
}
diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c
index 3e0d7ec..00ed19f 100644
--- a/arch/mips/rb532/serial.c
+++ b/arch/mips/rb532/serial.c
@@ -36,7 +36,7 @@
extern unsigned int idt_cpu_freq;
static struct uart_port rb532_uart = {
- .type = PORT_16550A,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
.irq = UART0_IRQ,
.iotype = UPIO_MEM,
--
1.5.6.4

32
target/linux/rb532/patches-2.6.27/023-rb532_fix_init_of_rb532_dev3_ctl_res.patch
View File

@ -1,32 +0,0 @@
This register just contains the address of the actual resource, so
initialisation has to be the same as cf_slot0_res and nand_slot0_res.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index d75eb19..40deb11 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -55,8 +55,6 @@ static struct resource rb532_gpio_reg0_res[] = {
static struct resource rb532_dev3_ctl_res[] = {
{
.name = "dev3_ctl",
- .start = REGBASE + DEV3BASE,
- .end = REGBASE + DEV3BASE + sizeof(struct dev_reg) - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -243,6 +241,9 @@ int __init rb532_gpio_init(void)
/* Register our GPIO chip */
gpiochip_add(&rb532_gpio_chip->chip);
+ rb532_dev3_ctl_res[0].start = readl(IDT434_REG_BASE + DEV3BASE);
+ rb532_dev3_ctl_res[0].end = rb532_dev3_ctl_res[0].start + 0x1000;
+
r = rb532_dev3_ctl_res;
dev3.base = ioremap_nocache(r->start, r->end - r->start);
--
1.5.6.4

23
target/linux/rb532/patches-2.6.27/024-rb532_fix_set_latch_u5.patch
View File

@ -1,23 +0,0 @@
The data to be written is just a byte, so use writeb instead of writel.
Also, dev3.base contains the address, not the data so referencing here
is wrong.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index 40deb11..7e0cb4f 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -93,7 +93,7 @@ void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
spin_lock_irqsave(&dev3.lock, flags);
dev3.state = (dev3.state | or_mask) & ~nand_mask;
- writel(dev3.state, &dev3.base);
+ writeb(dev3.state, dev3.base);
spin_unlock_irqrestore(&dev3.lock, flags);
}
--
1.5.6.4

48
target/linux/rb532/patches-2.6.27/025-rb532_nand_fixup.patch
View File

@ -1,48 +0,0 @@
--- a/arch/mips/rb532/devices.c 2009-01-25 13:36:15.000000000 +0100
+++ b/arch/mips/rb532/devices.c 2009-01-25 14:00:56.000000000 +0100
@@ -119,6 +119,19 @@
};
/* Resources and device for NAND */
+
+/*
+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
+ * will not be able to find the kernel that we load. So set the oobinfo
+ * when creating the partitions
+ */
+static struct nand_ecclayout rb532_nand_ecclayout = {
+ .eccbytes = 6,
+ .eccpos = { 8, 9, 10, 13, 14, 15 },
+ .oobavail = 9,
+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
+};
+
static int rb532_dev_ready(struct mtd_info *mtd)
{
return gpio_get_value(GPIO_RDY);
@@ -277,6 +290,16 @@
/* NAND definitions */
#define NAND_CHIP_DELAY 25
+static int rb532_nand_fixup(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if (mtd->writesize == 512)
+ chip->ecc.layout = &rb532_nand_ecclayout;
+
+ return 0;
+}
+
static void __init rb532_nand_setup(void)
{
switch (mips_machtype) {
@@ -296,6 +319,8 @@
rb532_nand_data.chip.partitions = rb532_partition_info;
rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
rb532_nand_data.chip.options = NAND_NO_AUTOINCR;
+
+ rb532_nand_data.chip.chip_fixup = &rb532_nand_fixup;
}