mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-25 12:45:33 +02:00
[ixp4xx]: refresh 2.6.36 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23776 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
parent
441f899569
commit
7724f3fbc3
@ -374,7 +374,7 @@
|
||||
+MODULE_AUTHOR("Chris Lang");
|
||||
--- a/drivers/gpio/Kconfig
|
||||
+++ b/drivers/gpio/Kconfig
|
||||
@@ -298,6 +298,14 @@ config GPIO_RDC321X
|
||||
@@ -316,6 +316,14 @@ config GPIO_RDC321X
|
||||
Support for the RDC R321x SoC GPIOs over southbridge
|
||||
PCI configuration space.
|
||||
|
||||
|
@ -34,8 +34,8 @@
|
||||
+obj-pci-$(CONFIG_MACH_WG302V1) += wg302v1-pci.o
|
||||
obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
|
||||
obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
|
||||
|
||||
@@ -28,6 +29,7 @@ obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.
|
||||
obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-pci.o
|
||||
@@ -29,6 +30,7 @@ obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.
|
||||
obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o
|
||||
obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
|
||||
obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
|
||||
|
@ -30,7 +30,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
|
||||
config ARCH_IXDP425
|
||||
bool "IXDP425"
|
||||
help
|
||||
@@ -169,7 +177,7 @@ config MACH_FSG
|
||||
@@ -177,7 +185,7 @@ config MACH_ARCOM_VULCAN
|
||||
#
|
||||
config CPU_IXP46X
|
||||
bool
|
||||
@ -41,17 +41,17 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
|
||||
config CPU_IXP43X
|
||||
--- a/arch/arm/mach-ixp4xx/Makefile
|
||||
+++ b/arch/arm/mach-ixp4xx/Makefile
|
||||
@@ -18,6 +18,7 @@ obj-pci-$(CONFIG_MACH_WG302V1) += wg302
|
||||
obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
|
||||
@@ -19,6 +19,7 @@ obj-pci-$(CONFIG_MACH_WG302V2) += wg302
|
||||
obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
|
||||
obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-pci.o
|
||||
obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o
|
||||
+obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
|
||||
|
||||
obj-y += common.o
|
||||
|
||||
@@ -35,6 +36,7 @@ obj-$(CONFIG_MACH_WG302V2) += wg302v2-se
|
||||
obj-$(CONFIG_MACH_FSG) += fsg-setup.o
|
||||
@@ -37,6 +38,7 @@ obj-$(CONFIG_MACH_FSG) += fsg-setup.o
|
||||
obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
|
||||
obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o
|
||||
obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o
|
||||
+obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
|
||||
|
||||
|
@ -1,6 +1,6 @@
|
||||
--- a/drivers/mtd/redboot.c
|
||||
+++ b/drivers/mtd/redboot.c
|
||||
@@ -13,6 +13,8 @@
|
||||
@@ -31,6 +31,8 @@
|
||||
|
||||
#define BOARD_CONFIG_PART "boardconfig"
|
||||
|
||||
@ -9,7 +9,7 @@
|
||||
struct fis_image_desc {
|
||||
unsigned char name[16]; // Null terminated name
|
||||
uint32_t flash_base; // Address within FLASH of image
|
||||
@@ -30,7 +32,8 @@ struct fis_list {
|
||||
@@ -48,7 +50,8 @@ struct fis_list {
|
||||
struct fis_list *next;
|
||||
};
|
||||
|
||||
@ -19,7 +19,7 @@
|
||||
module_param(directory, int, 0);
|
||||
|
||||
static inline int redboot_checksum(struct fis_image_desc *img)
|
||||
@@ -59,6 +62,8 @@ static int parse_redboot_partitions(stru
|
||||
@@ -77,6 +80,8 @@ static int parse_redboot_partitions(stru
|
||||
#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
|
||||
static char nullstring[] = "unallocated";
|
||||
#endif
|
||||
|
@ -32,16 +32,16 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
|
||||
help
|
||||
--- a/arch/arm/mach-ixp4xx/Makefile
|
||||
+++ b/arch/arm/mach-ixp4xx/Makefile
|
||||
@@ -19,6 +19,7 @@ obj-pci-$(CONFIG_MACH_WG302V2) += wg302
|
||||
obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
|
||||
@@ -20,6 +20,7 @@ obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
|
||||
obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-pci.o
|
||||
obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o
|
||||
obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
|
||||
+obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
|
||||
|
||||
obj-y += common.o
|
||||
|
||||
@@ -37,6 +38,7 @@ obj-$(CONFIG_MACH_FSG) += fsg-setup.o
|
||||
obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
|
||||
@@ -39,6 +40,7 @@ obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_
|
||||
obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o
|
||||
obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o
|
||||
obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
|
||||
+obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
|
||||
|
@ -17,7 +17,7 @@
|
||||
help
|
||||
--- a/arch/arm/mach-ixp4xx/Makefile
|
||||
+++ b/arch/arm/mach-ixp4xx/Makefile
|
||||
@@ -20,6 +20,7 @@ obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
|
||||
@@ -21,6 +21,7 @@ obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += v
|
||||
obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o
|
||||
obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
|
||||
obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
|
||||
@ -25,7 +25,7 @@
|
||||
|
||||
obj-y += common.o
|
||||
|
||||
@@ -39,6 +40,7 @@ obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_
|
||||
@@ -41,6 +42,7 @@ obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulca
|
||||
obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o
|
||||
obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
|
||||
obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
|
||||
|
@ -182,7 +182,7 @@
|
||||
help
|
||||
--- a/arch/arm/mach-ixp4xx/Makefile
|
||||
+++ b/arch/arm/mach-ixp4xx/Makefile
|
||||
@@ -21,6 +21,7 @@ obj-pci-$(CONFIG_MACH_PRONGHORN) += pron
|
||||
@@ -22,6 +22,7 @@ obj-pci-$(CONFIG_MACH_PRONGHORN) += pron
|
||||
obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
|
||||
obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
|
||||
obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
|
||||
@ -190,7 +190,7 @@
|
||||
|
||||
obj-y += common.o
|
||||
|
||||
@@ -41,6 +42,7 @@ obj-$(CONFIG_MACH_PRONGHORN) += pronghor
|
||||
@@ -43,6 +44,7 @@ obj-$(CONFIG_MACH_PRONGHORN) += pronghor
|
||||
obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
|
||||
obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
|
||||
obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
|
||||
|
@ -17,7 +17,7 @@
|
||||
prompt "NAS100D"
|
||||
--- a/arch/arm/mach-ixp4xx/Makefile
|
||||
+++ b/arch/arm/mach-ixp4xx/Makefile
|
||||
@@ -22,6 +22,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sid
|
||||
@@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sid
|
||||
obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
|
||||
obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
|
||||
obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
|
||||
@ -25,7 +25,7 @@
|
||||
|
||||
obj-y += common.o
|
||||
|
||||
@@ -43,6 +44,7 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin
|
||||
@@ -45,6 +46,7 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin
|
||||
obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
|
||||
obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
|
||||
obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
|
||||
|
@ -421,7 +421,7 @@
|
||||
+
|
||||
--- a/arch/arm/mach-ixp4xx/Makefile
|
||||
+++ b/arch/arm/mach-ixp4xx/Makefile
|
||||
@@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_COMPEX) += ixdp42
|
||||
@@ -24,6 +24,7 @@ obj-pci-$(CONFIG_MACH_COMPEX) += ixdp42
|
||||
obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
|
||||
obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
|
||||
obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
|
||||
@ -429,7 +429,7 @@
|
||||
|
||||
obj-y += common.o
|
||||
|
||||
@@ -45,6 +46,7 @@ obj-$(CONFIG_MACH_COMPEX) += compex-setu
|
||||
@@ -47,6 +48,7 @@ obj-$(CONFIG_MACH_COMPEX) += compex-setu
|
||||
obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
|
||||
obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
|
||||
obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
|
||||
@ -439,7 +439,7 @@
|
||||
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
|
||||
--- a/arch/arm/mach-ixp4xx/Kconfig
|
||||
+++ b/arch/arm/mach-ixp4xx/Kconfig
|
||||
@@ -235,6 +235,13 @@ config MACH_GTWX5715
|
||||
@@ -243,6 +243,13 @@ config MACH_GTWX5715
|
||||
"High Speed" UART is n/c (as far as I can tell)
|
||||
20 Pin ARM/Xscale JTAG interface on J2
|
||||
|
||||
|
@ -524,7 +524,7 @@
|
||||
config MACH_LOFT
|
||||
bool "Loft"
|
||||
depends on MACH_AVILA
|
||||
@@ -214,7 +222,7 @@ config CPU_IXP46X
|
||||
@@ -222,7 +230,7 @@ config CPU_IXP46X
|
||||
|
||||
config CPU_IXP43X
|
||||
bool
|
||||
@ -543,7 +543,7 @@
|
||||
obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
|
||||
obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
|
||||
obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
|
||||
@@ -29,6 +30,7 @@ obj-y += common.o
|
||||
@@ -30,6 +31,7 @@ obj-y += common.o
|
||||
|
||||
obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o
|
||||
obj-$(CONFIG_MACH_AVILA) += avila-setup.o
|
||||
|
@ -106,7 +106,7 @@
|
||||
unsigned int type; /* If UPF_FIXED_TYPE */
|
||||
--- a/include/linux/serial_core.h
|
||||
+++ b/include/linux/serial_core.h
|
||||
@@ -293,6 +293,7 @@ struct uart_port {
|
||||
@@ -306,6 +306,7 @@ struct uart_port {
|
||||
#define UPIO_TSI (5) /* Tsi108/109 type IO */
|
||||
#define UPIO_DWAPB (6) /* DesignWare APB UART */
|
||||
#define UPIO_RM9000 (7) /* RM9000 type IO */
|
||||
@ -114,7 +114,7 @@
|
||||
|
||||
unsigned int read_status_mask; /* driver specific */
|
||||
unsigned int ignore_status_mask; /* driver specific */
|
||||
@@ -335,6 +336,7 @@ struct uart_port {
|
||||
@@ -348,6 +349,7 @@ struct uart_port {
|
||||
|
||||
unsigned int mctrl; /* current modem ctrl settings */
|
||||
unsigned int timeout; /* character-based timeout */
|
||||
@ -199,7 +199,7 @@
|
||||
uart->port.dev = port->dev;
|
||||
--- a/drivers/serial/serial_core.c
|
||||
+++ b/drivers/serial/serial_core.c
|
||||
@@ -2144,6 +2144,7 @@ uart_report_port(struct uart_driver *drv
|
||||
@@ -2122,6 +2122,7 @@ uart_report_port(struct uart_driver *drv
|
||||
snprintf(address, sizeof(address),
|
||||
"I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
|
||||
break;
|
||||
@ -207,7 +207,7 @@
|
||||
case UPIO_MEM:
|
||||
case UPIO_MEM32:
|
||||
case UPIO_AU:
|
||||
@@ -2557,6 +2558,7 @@ int uart_match_port(struct uart_port *po
|
||||
@@ -2541,6 +2542,7 @@ int uart_match_port(struct uart_port *po
|
||||
case UPIO_HUB6:
|
||||
return (port1->iobase == port2->iobase) &&
|
||||
(port1->hub6 == port2->hub6);
|
||||
|
@ -90,7 +90,7 @@
|
||||
}
|
||||
|
||||
static struct cambria_board_info cambria_boards[] __initdata = {
|
||||
@@ -460,6 +507,14 @@ static struct i2c_board_info __initdata
|
||||
@@ -460,6 +507,14 @@ static struct i2c_board_info __initdata
|
||||
I2C_BOARD_INFO("24c08", 0x51),
|
||||
.platform_data = &cambria_eeprom_info
|
||||
},
|
||||
|
@ -1,6 +1,6 @@
|
||||
--- a/drivers/net/arm/ixp4xx_eth.c
|
||||
+++ b/drivers/net/arm/ixp4xx_eth.c
|
||||
@@ -1220,6 +1220,10 @@ static int __devinit eth_init_one(struct
|
||||
@@ -1232,6 +1232,10 @@ static int __devinit eth_init_one(struct
|
||||
if ((err = IS_ERR(port->phydev)))
|
||||
goto err_free_mem;
|
||||
|
||||
|
@ -51,7 +51,7 @@
|
||||
|
||||
static inline void debug_pkt(struct net_device *dev, const char *func,
|
||||
u8 *data, int len)
|
||||
@@ -1008,8 +1052,7 @@ static int eth_open(struct net_device *d
|
||||
@@ -1020,8 +1064,7 @@ static int eth_open(struct net_device *d
|
||||
return err;
|
||||
}
|
||||
|
||||
@ -61,7 +61,7 @@
|
||||
|
||||
for (i = 0; i < ETH_ALEN; i++)
|
||||
__raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]);
|
||||
@@ -1130,7 +1173,7 @@ static int eth_close(struct net_device *
|
||||
@@ -1142,7 +1185,7 @@ static int eth_close(struct net_device *
|
||||
printk(KERN_CRIT "%s: unable to disable loopback\n",
|
||||
dev->name);
|
||||
|
||||
@ -70,7 +70,7 @@
|
||||
|
||||
if (!ports_open)
|
||||
qmgr_disable_irq(TXDONE_QUEUE);
|
||||
@@ -1156,7 +1199,6 @@ static int __devinit eth_init_one(struct
|
||||
@@ -1168,7 +1211,6 @@ static int __devinit eth_init_one(struct
|
||||
struct net_device *dev;
|
||||
struct eth_plat_info *plat = pdev->dev.platform_data;
|
||||
u32 regs_phys;
|
||||
@ -78,7 +78,7 @@
|
||||
int err;
|
||||
|
||||
if (!(dev = alloc_etherdev(sizeof(struct port))))
|
||||
@@ -1214,18 +1256,10 @@ static int __devinit eth_init_one(struct
|
||||
@@ -1226,18 +1268,10 @@ static int __devinit eth_init_one(struct
|
||||
__raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
|
||||
udelay(50);
|
||||
|
||||
@ -99,7 +99,7 @@
|
||||
if ((err = register_netdev(dev)))
|
||||
goto err_phy_dis;
|
||||
|
||||
@@ -1235,7 +1269,7 @@ static int __devinit eth_init_one(struct
|
||||
@@ -1247,7 +1281,7 @@ static int __devinit eth_init_one(struct
|
||||
return 0;
|
||||
|
||||
err_phy_dis:
|
||||
@ -108,7 +108,7 @@
|
||||
err_free_mem:
|
||||
npe_port_tab[NPE_ID(port->id)] = NULL;
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
@@ -1253,7 +1287,7 @@ static int __devexit eth_remove_one(stru
|
||||
@@ -1265,7 +1299,7 @@ static int __devexit eth_remove_one(stru
|
||||
struct port *port = netdev_priv(dev);
|
||||
|
||||
unregister_netdev(dev);
|
||||
|
@ -85,7 +85,7 @@
|
||||
phy_start(port->phydev);
|
||||
}
|
||||
|
||||
@@ -1263,6 +1277,10 @@ static int __devinit eth_init_one(struct
|
||||
@@ -1275,6 +1289,10 @@ static int __devinit eth_init_one(struct
|
||||
if ((err = register_netdev(dev)))
|
||||
goto err_phy_dis;
|
||||
|
||||
|
@ -9,7 +9,7 @@
|
||||
#define RX_BUFF_SIZE ALIGN((NET_IP_ALIGN) + MAX_MRU, 4)
|
||||
|
||||
#define NAPI_WEIGHT 16
|
||||
@@ -1064,6 +1064,32 @@ static void destroy_queues(struct port *
|
||||
@@ -1075,6 +1075,32 @@ static void destroy_queues(struct port *
|
||||
}
|
||||
}
|
||||
|
||||
@ -42,7 +42,7 @@
|
||||
static int eth_open(struct net_device *dev)
|
||||
{
|
||||
struct port *port = netdev_priv(dev);
|
||||
@@ -1115,6 +1141,8 @@ static int eth_open(struct net_device *d
|
||||
@@ -1126,6 +1152,8 @@ static int eth_open(struct net_device *d
|
||||
if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE"))
|
||||
return -EIO;
|
||||
|
||||
@ -51,7 +51,7 @@
|
||||
if ((err = request_queues(port)) != 0)
|
||||
return err;
|
||||
|
||||
@@ -1254,7 +1282,26 @@ static int eth_close(struct net_device *
|
||||
@@ -1265,7 +1293,26 @@ static int eth_close(struct net_device *
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -17,7 +17,7 @@
|
||||
select PCI
|
||||
--- a/arch/arm/mach-ixp4xx/Makefile
|
||||
+++ b/arch/arm/mach-ixp4xx/Makefile
|
||||
@@ -25,6 +25,7 @@ obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt
|
||||
@@ -26,6 +26,7 @@ obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt
|
||||
obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
|
||||
obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
|
||||
obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o
|
||||
@ -25,7 +25,7 @@
|
||||
|
||||
obj-y += common.o
|
||||
|
||||
@@ -49,6 +50,7 @@ obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv
|
||||
@@ -51,6 +52,7 @@ obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv
|
||||
obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
|
||||
obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
|
||||
obj-$(CONFIG_MACH_MI424WR) += mi424wr-setup.o
|
||||
|
@ -18,7 +18,7 @@
|
||||
select PCI
|
||||
--- a/arch/arm/mach-ixp4xx/Makefile
|
||||
+++ b/arch/arm/mach-ixp4xx/Makefile
|
||||
@@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sid
|
||||
@@ -24,6 +24,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sid
|
||||
obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
|
||||
obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
|
||||
obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
|
||||
@ -26,7 +26,7 @@
|
||||
obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
|
||||
obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o
|
||||
obj-pci-$(CONFIG_MACH_USR8200) += usr8200-pci.o
|
||||
@@ -48,6 +49,7 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin
|
||||
@@ -50,6 +51,7 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin
|
||||
obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
|
||||
obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
|
||||
obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
|
||||
|
Loading…
Reference in New Issue
Block a user