mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-08-20 10:08:03 +03:00
Merge SSB driver from tree at bu3sch.de, pulled 24/6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7732 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
parent
6a140db132
commit
77c9f26cec
@ -293,15 +293,15 @@ void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
|
||||
|
||||
/* set register for external IO to control LED. */
|
||||
chipco_write32(cc, SSB_CHIPCO_PROG_CFG, 0x11);
|
||||
tmp = ceildiv(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */
|
||||
tmp |= ceildiv(40, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 40ns */
|
||||
tmp |= ceildiv(240, ns); /* Waitcount-0 = 240ns */
|
||||
tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */
|
||||
tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 40ns */
|
||||
tmp |= DIV_ROUND_UP(240, ns); /* Waitcount-0 = 240ns */
|
||||
chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */
|
||||
|
||||
/* Set timing for the flash */
|
||||
tmp = ceildiv(10, ns) << SSB_FLASH_WCNT_3_SHIFT; /* Waitcount-3 = 10nS */
|
||||
tmp |= ceildiv(10, ns) << SSB_FLASH_WCNT_1_SHIFT; /* Waitcount-1 = 10nS */
|
||||
tmp |= ceildiv(120, ns); /* Waitcount-0 = 120nS */
|
||||
tmp = DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_3_SHIFT; /* Waitcount-3 = 10nS */
|
||||
tmp |= DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_1_SHIFT; /* Waitcount-1 = 10nS */
|
||||
tmp |= DIV_ROUND_UP(120, ns); /* Waitcount-0 = 120nS */
|
||||
if ((bus->chip_id == 0x5365) ||
|
||||
(dev->id.revision < 9))
|
||||
chipco_write32(cc, SSB_CHIPCO_FLASH_WAITCNT, tmp);
|
||||
@ -312,10 +312,10 @@ void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
|
||||
|
||||
if (bus->chip_id == 0x5350) {
|
||||
/* Enable EXTIF */
|
||||
tmp = ceildiv(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */
|
||||
tmp |= ceildiv(20, ns) << SSB_PROG_WCNT_2_SHIFT; /* Waitcount-2 = 20ns */
|
||||
tmp |= ceildiv(100, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 100ns */
|
||||
tmp |= ceildiv(120, ns); /* Waitcount-0 = 120ns */
|
||||
tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */
|
||||
tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT; /* Waitcount-2 = 20ns */
|
||||
tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 100ns */
|
||||
tmp |= DIV_ROUND_UP(120, ns); /* Waitcount-0 = 120ns */
|
||||
chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */
|
||||
}
|
||||
}
|
||||
|
@ -32,7 +32,7 @@ MODULE_LICENSE("GPL");
|
||||
|
||||
static LIST_HEAD(attach_queue);
|
||||
static LIST_HEAD(buses);
|
||||
static int nr_buses;
|
||||
static unsigned int next_busnumber;
|
||||
static DEFINE_MUTEX(buses_mutex);
|
||||
|
||||
static void ssb_buses_lock(void);
|
||||
@ -365,7 +365,7 @@ static int ssb_devices_register(struct ssb_bus *bus)
|
||||
dev->release = ssb_release_dev;
|
||||
dev->bus = &ssb_bustype;
|
||||
snprintf(dev->bus_id, sizeof(dev->bus_id),
|
||||
"ssb%d:%d", bus->busnumber, dev_idx);
|
||||
"ssb%u:%d", bus->busnumber, dev_idx);
|
||||
|
||||
switch (bus->bustype) {
|
||||
case SSB_BUSTYPE_PCI:
|
||||
@ -435,17 +435,6 @@ static int ssb_attach_queued_buses(void)
|
||||
return err;
|
||||
}
|
||||
|
||||
static void ssb_get_boardtype(struct ssb_bus *bus)
|
||||
{//FIXME for pcmcia?
|
||||
if (bus->bustype != SSB_BUSTYPE_PCI) {
|
||||
/* Must set board_vendor, board_type and board_rev
|
||||
* before calling ssb_bus_*_register() */
|
||||
assert(bus->board_vendor && bus->board_type);
|
||||
return;
|
||||
}
|
||||
ssb_pci_get_boardtype(bus);
|
||||
}
|
||||
|
||||
static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset)
|
||||
{
|
||||
struct ssb_bus *bus = dev->bus;
|
||||
@ -485,7 +474,26 @@ static const struct ssb_bus_ops ssb_ssb_ops = {
|
||||
.write32 = ssb_ssb_write32,
|
||||
};
|
||||
|
||||
static int ssb_fetch_invariants(struct ssb_bus *bus,
|
||||
int (*get_invariants)(struct ssb_bus *bus,
|
||||
struct ssb_init_invariants *iv))
|
||||
{
|
||||
struct ssb_init_invariants iv;
|
||||
int err;
|
||||
|
||||
memset(&iv, 0, sizeof(iv));
|
||||
err = get_invariants(bus, &iv);
|
||||
if (err)
|
||||
goto out;
|
||||
memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo));
|
||||
memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom));
|
||||
out:
|
||||
return err;
|
||||
}
|
||||
|
||||
static int ssb_bus_register(struct ssb_bus *bus,
|
||||
int (*get_invariants)(struct ssb_bus *bus,
|
||||
struct ssb_init_invariants *iv),
|
||||
unsigned long baseaddr)
|
||||
{
|
||||
int err;
|
||||
@ -493,13 +501,12 @@ static int ssb_bus_register(struct ssb_bus *bus,
|
||||
spin_lock_init(&bus->bar_lock);
|
||||
INIT_LIST_HEAD(&bus->list);
|
||||
|
||||
ssb_get_boardtype(bus);
|
||||
/* Powerup the bus */
|
||||
err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
|
||||
if (err)
|
||||
goto out;
|
||||
ssb_buses_lock();
|
||||
bus->busnumber = nr_buses;
|
||||
bus->busnumber = next_busnumber;
|
||||
/* Scan for devices (cores) */
|
||||
err = ssb_bus_scan(bus, baseaddr);
|
||||
if (err)
|
||||
@ -517,6 +524,9 @@ static int ssb_bus_register(struct ssb_bus *bus,
|
||||
/* Initialize basic system devices (if available) */
|
||||
ssb_chipcommon_init(&bus->chipco);
|
||||
ssb_mipscore_init(&bus->mipscore);
|
||||
err = ssb_fetch_invariants(bus, get_invariants);
|
||||
if (err)
|
||||
goto err_pcmcia_exit;
|
||||
|
||||
/* Queue it for attach */
|
||||
list_add_tail(&bus->list, &attach_queue);
|
||||
@ -526,7 +536,7 @@ static int ssb_bus_register(struct ssb_bus *bus,
|
||||
if (err)
|
||||
goto err_dequeue;
|
||||
}
|
||||
nr_buses++;
|
||||
next_busnumber++;
|
||||
ssb_buses_unlock();
|
||||
|
||||
out:
|
||||
@ -534,7 +544,7 @@ out:
|
||||
|
||||
err_dequeue:
|
||||
list_del(&bus->list);
|
||||
/* err_pcmcia_exit: */
|
||||
err_pcmcia_exit:
|
||||
/* ssb_pcmcia_exit(bus); */
|
||||
err_pci_exit:
|
||||
ssb_pci_exit(bus);
|
||||
@ -556,7 +566,7 @@ int ssb_bus_pcibus_register(struct ssb_bus *bus,
|
||||
bus->host_pci = host_pci;
|
||||
bus->ops = &ssb_pci_ops;
|
||||
|
||||
err = ssb_bus_register(bus, 0);
|
||||
err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
|
||||
if (!err) {
|
||||
ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
|
||||
"PCI device %s\n", host_pci->dev.bus_id);
|
||||
@ -570,17 +580,15 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register);
|
||||
#ifdef CONFIG_SSB_PCMCIAHOST
|
||||
int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
|
||||
struct pcmcia_device *pcmcia_dev,
|
||||
unsigned long baseaddr,
|
||||
void (*fill_sprom)(struct ssb_sprom *sprom))
|
||||
unsigned long baseaddr)
|
||||
{
|
||||
int err;
|
||||
|
||||
bus->bustype = SSB_BUSTYPE_PCMCIA;
|
||||
bus->host_pcmcia = pcmcia_dev;
|
||||
bus->ops = &ssb_pcmcia_ops;
|
||||
fill_sprom(&bus->sprom);
|
||||
|
||||
err = ssb_bus_register(bus, baseaddr);
|
||||
err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
|
||||
if (!err) {
|
||||
ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
|
||||
"PCMCIA device %s\n", pcmcia_dev->devname);
|
||||
@ -593,15 +601,15 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
|
||||
|
||||
int ssb_bus_ssbbus_register(struct ssb_bus *bus,
|
||||
unsigned long baseaddr,
|
||||
void (*fill_sprom)(struct ssb_sprom *sprom))
|
||||
int (*get_invariants)(struct ssb_bus *bus,
|
||||
struct ssb_init_invariants *iv))
|
||||
{
|
||||
int err;
|
||||
|
||||
bus->bustype = SSB_BUSTYPE_SSB;
|
||||
bus->ops = &ssb_ssb_ops;
|
||||
fill_sprom(&bus->sprom);
|
||||
|
||||
err = ssb_bus_register(bus, baseaddr);
|
||||
err = ssb_bus_register(bus, get_invariants, baseaddr);
|
||||
if (!err) {
|
||||
ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
|
||||
"address 0x%08lX\n", baseaddr);
|
||||
|
@ -330,12 +330,12 @@ static void sprom_extract_r1(struct ssb_sprom_r1 *out, const u16 *in)
|
||||
SPEX(gpio2, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P2, 0);
|
||||
SPEX(gpio3, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P3,
|
||||
SSB_SPROM1_GPIOB_P3_SHIFT);
|
||||
SPEX(maxpwr_a, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_A, 0);
|
||||
SPEX(maxpwr_bg, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_BG,
|
||||
SSB_SPROM1_MAXPWR_BG_SHIFT);
|
||||
SPEX(itssi_a, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_A, 0);
|
||||
SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG,
|
||||
SSB_SPROM1_ITSSI_BG_SHIFT);
|
||||
SPEX(maxpwr_a, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_A,
|
||||
SSB_SPROM1_MAXPWR_A_SHIFT);
|
||||
SPEX(maxpwr_bg, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_BG, 0);
|
||||
SPEX(itssi_a, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_A,
|
||||
SSB_SPROM1_ITSSI_A_SHIFT);
|
||||
SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
|
||||
SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
|
||||
SPEX(antenna_gain_a, SSB_SPROM1_AGAIN, SSB_SPROM1_AGAIN_A, 0);
|
||||
SPEX(antenna_gain_bg, SSB_SPROM1_AGAIN, SSB_SPROM1_AGAIN_BG,
|
||||
@ -407,7 +407,8 @@ static void sprom_extract_r3(struct ssb_sprom_r3 *out, const u16 *in)
|
||||
out->ofdmgpo |= (in[SPOFF(SSB_SPROM3_OFDMGPO) + 1] & 0x00FF) << 8;
|
||||
}
|
||||
|
||||
static int sprom_extract(struct ssb_sprom *out, const u16 *in)
|
||||
static int sprom_extract(struct ssb_bus *bus,
|
||||
struct ssb_sprom *out, const u16 *in)
|
||||
{
|
||||
memset(out, 0, sizeof(*out));
|
||||
|
||||
@ -415,6 +416,12 @@ static int sprom_extract(struct ssb_sprom *out, const u16 *in)
|
||||
SPEX(crc, SSB_SPROM_REVISION, SSB_SPROM_REVISION_CRC,
|
||||
SSB_SPROM_REVISION_CRC_SHIFT);
|
||||
|
||||
if ((bus->chip_id & 0xFF00) == 0x4400) {
|
||||
/* Workaround: The BCM44XX chip has a stupid revision
|
||||
* number stored in the SPROM.
|
||||
* Always extract r1. */
|
||||
sprom_extract_r1(&out->r1, in);
|
||||
} else {
|
||||
if (out->revision == 0)
|
||||
goto unsupported;
|
||||
if (out->revision >= 1 && out->revision <= 3)
|
||||
@ -425,6 +432,7 @@ static int sprom_extract(struct ssb_sprom *out, const u16 *in)
|
||||
sprom_extract_r3(&out->r3, in);
|
||||
if (out->revision >= 4)
|
||||
goto unsupported;
|
||||
}
|
||||
|
||||
return 0;
|
||||
unsupported:
|
||||
@ -434,13 +442,12 @@ unsupported:
|
||||
return 0;
|
||||
}
|
||||
|
||||
int ssb_pci_sprom_get(struct ssb_bus *bus)
|
||||
static int ssb_pci_sprom_get(struct ssb_bus *bus,
|
||||
struct ssb_sprom *sprom)
|
||||
{
|
||||
int err = -ENOMEM;
|
||||
u16 *buf;
|
||||
|
||||
assert(bus->bustype == SSB_BUSTYPE_PCI);
|
||||
|
||||
buf = kcalloc(SSB_SPROMSIZE_WORDS, sizeof(u16), GFP_KERNEL);
|
||||
if (!buf)
|
||||
goto out;
|
||||
@ -450,21 +457,36 @@ int ssb_pci_sprom_get(struct ssb_bus *bus)
|
||||
ssb_printk(KERN_WARNING PFX
|
||||
"WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
|
||||
}
|
||||
err = sprom_extract(&bus->sprom, buf);
|
||||
err = sprom_extract(bus, sprom, buf);
|
||||
|
||||
kfree(buf);
|
||||
out:
|
||||
return err;
|
||||
}
|
||||
|
||||
void ssb_pci_get_boardtype(struct ssb_bus *bus)
|
||||
static void ssb_pci_get_boardinfo(struct ssb_bus *bus,
|
||||
struct ssb_boardinfo *bi)
|
||||
{
|
||||
pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_VENDOR_ID,
|
||||
&bus->board_vendor);
|
||||
&bi->vendor);
|
||||
pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_ID,
|
||||
&bus->board_type);
|
||||
&bi->type);
|
||||
pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
|
||||
&bus->board_rev);
|
||||
&bi->rev);
|
||||
}
|
||||
|
||||
int ssb_pci_get_invariants(struct ssb_bus *bus,
|
||||
struct ssb_init_invariants *iv)
|
||||
{
|
||||
int err;
|
||||
|
||||
err = ssb_pci_sprom_get(bus, &iv->sprom);
|
||||
if (err)
|
||||
goto out;
|
||||
ssb_pci_get_boardinfo(bus, &iv->boardinfo);
|
||||
|
||||
out:
|
||||
return err;
|
||||
}
|
||||
|
||||
static u16 ssb_pci_read16(struct ssb_device *dev, u16 offset)
|
||||
@ -660,13 +682,7 @@ int ssb_pci_init(struct ssb_bus *bus)
|
||||
err = device_create_file(&pdev->dev, &dev_attr_ssb_sprom);
|
||||
if (err)
|
||||
goto out;
|
||||
err = ssb_pci_sprom_get(bus);
|
||||
if (err)
|
||||
goto err_remove_sprom_file;
|
||||
|
||||
out:
|
||||
return err;
|
||||
err_remove_sprom_file:
|
||||
device_remove_file(&pdev->dev, &dev_attr_ssb_sprom);
|
||||
return err;
|
||||
}
|
||||
|
@ -222,6 +222,13 @@ const struct ssb_bus_ops ssb_pcmcia_ops = {
|
||||
.write32 = ssb_pcmcia_write32,
|
||||
};
|
||||
|
||||
int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
|
||||
struct ssb_init_invariants *iv)
|
||||
{
|
||||
//TODO
|
||||
return 0;
|
||||
}
|
||||
|
||||
int ssb_pcmcia_init(struct ssb_bus *bus)
|
||||
{
|
||||
conf_reg_t reg;
|
||||
|
@ -202,7 +202,11 @@ void ssb_iounmap(struct ssb_bus *bus)
|
||||
iounmap(bus->mmio);
|
||||
break;
|
||||
case SSB_BUSTYPE_PCI:
|
||||
#ifdef CONFIG_SSB_PCIHOST
|
||||
pci_iounmap(bus->host_pci, bus->mmio);
|
||||
#else
|
||||
assert(0); /* Can't reach this code. */
|
||||
#endif
|
||||
break;
|
||||
}
|
||||
bus->mmio = NULL;
|
||||
@ -222,7 +226,11 @@ static void __iomem * ssb_ioremap(struct ssb_bus *bus,
|
||||
mmio = ioremap(baseaddr, SSB_CORE_SIZE);
|
||||
break;
|
||||
case SSB_BUSTYPE_PCI:
|
||||
#ifdef CONFIG_SSB_PCIHOST
|
||||
mmio = pci_iomap(bus->host_pci, 0, ~0UL);
|
||||
#else
|
||||
assert(0); /* Can't reach this code. */
|
||||
#endif
|
||||
break;
|
||||
}
|
||||
|
||||
|
@ -51,8 +51,8 @@ extern int ssb_pci_switch_coreidx(struct ssb_bus *bus,
|
||||
u8 coreidx);
|
||||
extern int ssb_pci_xtal(struct ssb_bus *bus, u32 what,
|
||||
int turn_on);
|
||||
extern int ssb_pci_sprom_get(struct ssb_bus *bus);
|
||||
extern void ssb_pci_get_boardtype(struct ssb_bus *bus);
|
||||
extern int ssb_pci_get_invariants(struct ssb_bus *bus,
|
||||
struct ssb_init_invariants *iv);
|
||||
extern void ssb_pci_exit(struct ssb_bus *bus);
|
||||
extern int ssb_pci_init(struct ssb_bus *bus);
|
||||
extern const struct ssb_bus_ops ssb_pci_ops;
|
||||
@ -74,13 +74,6 @@ static inline int ssb_pci_xtal(struct ssb_bus *bus, u32 what,
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
static inline int ssb_pci_sprom_get(struct ssb_bus *bus)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
static inline void ssb_pci_get_boardtype(struct ssb_bus *bus)
|
||||
{
|
||||
}
|
||||
static inline void ssb_pci_exit(struct ssb_bus *bus)
|
||||
{
|
||||
}
|
||||
@ -99,6 +92,8 @@ extern int ssb_pcmcia_switch_coreidx(struct ssb_bus *bus,
|
||||
u8 coreidx);
|
||||
extern int ssb_pcmcia_switch_segment(struct ssb_bus *bus,
|
||||
u8 seg);
|
||||
extern int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
|
||||
struct ssb_init_invariants *iv);
|
||||
extern int ssb_pcmcia_init(struct ssb_bus *bus);
|
||||
extern const struct ssb_bus_ops ssb_pcmcia_ops;
|
||||
#else /* CONFIG_SSB_PCMCIAHOST */
|
||||
@ -139,13 +134,4 @@ extern int ssb_devices_thaw(struct ssb_bus *bus);
|
||||
extern struct ssb_bus * ssb_pci_dev_to_bus(struct pci_dev *pdev);
|
||||
#endif /* CONFIG_SSB_PCIHOST */
|
||||
|
||||
|
||||
/* Ceiling division helper. Divides x by y. */
|
||||
static inline
|
||||
unsigned long ceildiv(unsigned long x, unsigned long y)
|
||||
{
|
||||
return ((x + (y - 1)) / y);
|
||||
}
|
||||
|
||||
|
||||
#endif /* LINUX_SSB_PRIVATE_H_ */
|
||||
|
@ -100,6 +100,13 @@ struct ssb_sprom {
|
||||
};
|
||||
};
|
||||
|
||||
/* Information about the PCB the circuitry is soldered on. */
|
||||
struct ssb_boardinfo {
|
||||
u16 vendor;
|
||||
u16 type;
|
||||
u16 rev;
|
||||
};
|
||||
|
||||
|
||||
struct ssb_device;
|
||||
/* Lowlevel read/write operations on the device MMIO.
|
||||
@ -292,19 +299,11 @@ struct ssb_bus {
|
||||
struct mutex pci_sprom_mutex;
|
||||
#endif
|
||||
|
||||
/* ID information about the PCB. */
|
||||
u16 board_vendor;
|
||||
u16 board_type;
|
||||
u16 board_rev;
|
||||
/* ID information about the Chip. */
|
||||
u16 chip_id;
|
||||
u16 chip_rev;
|
||||
u8 chip_package;
|
||||
|
||||
/* Contents of the SPROM.
|
||||
* If there is no sprom (not on PCI-bus), this is emulated. */
|
||||
struct ssb_sprom sprom;
|
||||
|
||||
/* List of devices (cores) on the backplane. */
|
||||
struct ssb_device devices[SSB_MAX_NR_CORES];
|
||||
u8 nr_devices;
|
||||
@ -313,7 +312,7 @@ struct ssb_bus {
|
||||
u8 suspend_cnt;
|
||||
|
||||
/* Software ID number for this bus. */
|
||||
int busnumber;
|
||||
unsigned int busnumber;
|
||||
|
||||
/* The ChipCommon device (if available). */
|
||||
struct ssb_chipcommon chipco;
|
||||
@ -324,13 +323,34 @@ struct ssb_bus {
|
||||
/* The EXTif-core device (if available). */
|
||||
struct ssb_extif extif;
|
||||
|
||||
/* The following structure elements are not available in early
|
||||
* SSB initialization. Though, they are available for regular
|
||||
* registered drivers at any stage. So be careful when
|
||||
* using them in the ssb core code. */
|
||||
|
||||
/* ID information about the PCB. */
|
||||
struct ssb_boardinfo boardinfo;
|
||||
/* Contents of the SPROM. */
|
||||
struct ssb_sprom sprom;
|
||||
|
||||
/* Internal. */
|
||||
struct list_head list;
|
||||
};
|
||||
|
||||
/* The initialization-invariants. */
|
||||
struct ssb_init_invariants {
|
||||
struct ssb_boardinfo boardinfo;
|
||||
struct ssb_sprom sprom;
|
||||
};
|
||||
|
||||
/* Register a SSB system bus. get_invariants() is called after the
|
||||
* basic system devices are initialized.
|
||||
* The invariants are usually fetched from some NVRAM.
|
||||
* Put the invariants into the struct pointed to by iv. */
|
||||
extern int ssb_bus_ssbbus_register(struct ssb_bus *bus,
|
||||
unsigned long baseaddr,
|
||||
void (*fill_sprom)(struct ssb_sprom *sprom));
|
||||
int (*get_invariants)(struct ssb_bus *bus,
|
||||
struct ssb_init_invariants *iv));
|
||||
#ifdef CONFIG_SSB_PCIHOST
|
||||
extern int ssb_bus_pcibus_register(struct ssb_bus *bus,
|
||||
struct pci_dev *host_pci);
|
||||
@ -338,8 +358,7 @@ extern int ssb_bus_pcibus_register(struct ssb_bus *bus,
|
||||
#ifdef CONFIG_SSB_PCMCIAHOST
|
||||
extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
|
||||
struct pcmcia_device *pcmcia_dev,
|
||||
unsigned long baseaddr,
|
||||
void (*fill_sprom)(struct ssb_sprom *sprom));
|
||||
unsigned long baseaddr);
|
||||
#endif /* CONFIG_SSB_PCMCIAHOST */
|
||||
|
||||
extern void ssb_bus_unregister(struct ssb_bus *bus);
|
||||
|
@ -201,16 +201,16 @@
|
||||
#define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */
|
||||
#define SSB_SPROM1_GPIOB_P3_SHIFT 8
|
||||
#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */
|
||||
#define SSB_SPROM1_MAXPWR_A 0x00FF /* A-PHY (in dBm Q5.2) */
|
||||
#define SSB_SPROM1_MAXPWR_BG 0xFF00 /* B-PHY and G-PHY (in dBm Q5.2) */
|
||||
#define SSB_SPROM1_MAXPWR_BG_SHIFT 8
|
||||
#define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */
|
||||
#define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */
|
||||
#define SSB_SPROM1_MAXPWR_A_SHIFT 8
|
||||
#define SSB_SPROM1_PA1B0 0x106A
|
||||
#define SSB_SPROM1_PA1B1 0x106C
|
||||
#define SSB_SPROM1_PA1B2 0x106E
|
||||
#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */
|
||||
#define SSB_SPROM1_ITSSI_A 0x00FF /* A-PHY */
|
||||
#define SSB_SPROM1_ITSSI_BG 0xFF00 /* B-PHY and G-PHY */
|
||||
#define SSB_SPROM1_ITSSI_BG_SHIFT 8
|
||||
#define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/
|
||||
#define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */
|
||||
#define SSB_SPROM1_ITSSI_A_SHIFT 8
|
||||
#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */
|
||||
#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */
|
||||
#define SSB_SPROM1_AGAIN_A 0x00FF /* A-PHY */
|
||||
|
@ -1,7 +1,7 @@
|
||||
Index: linux-2.6.22-rc4/drivers/ssb/driver_chipcommon.c
|
||||
Index: linux-2.6.22-rc5/drivers/ssb/driver_chipcommon.c
|
||||
===================================================================
|
||||
--- linux-2.6.22-rc4.orig/drivers/ssb/driver_chipcommon.c 2007-06-10 21:32:11.000000000 +0100
|
||||
+++ linux-2.6.22-rc4/drivers/ssb/driver_chipcommon.c 2007-06-10 21:33:25.000000000 +0100
|
||||
--- linux-2.6.22-rc5.orig/drivers/ssb/driver_chipcommon.c 2007-06-21 23:04:38.000000000 +0100
|
||||
+++ linux-2.6.22-rc5/drivers/ssb/driver_chipcommon.c 2007-06-24 20:07:15.000000000 +0100
|
||||
@@ -264,6 +264,31 @@
|
||||
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
|
||||
}
|
||||
@ -48,10 +48,10 @@ Index: linux-2.6.22-rc4/drivers/ssb/driver_chipcommon.c
|
||||
+ return 0;
|
||||
+}
|
||||
+EXPORT_SYMBOL(ssb_chipco_watchdog);
|
||||
Index: linux-2.6.22-rc4/drivers/ssb/driver_mipscore.c
|
||||
Index: linux-2.6.22-rc5/drivers/ssb/driver_mipscore.c
|
||||
===================================================================
|
||||
--- linux-2.6.22-rc4.orig/drivers/ssb/driver_mipscore.c 2007-06-10 21:32:11.000000000 +0100
|
||||
+++ linux-2.6.22-rc4/drivers/ssb/driver_mipscore.c 2007-06-10 21:33:25.000000000 +0100
|
||||
--- linux-2.6.22-rc5.orig/drivers/ssb/driver_mipscore.c 2007-06-10 16:44:31.000000000 +0100
|
||||
+++ linux-2.6.22-rc5/drivers/ssb/driver_mipscore.c 2007-06-24 20:48:52.000000000 +0100
|
||||
@@ -4,6 +4,7 @@
|
||||
*
|
||||
* Copyright 2005, Broadcom Corporation
|
||||
@ -116,16 +116,16 @@ Index: linux-2.6.22-rc4/drivers/ssb/driver_mipscore.c
|
||||
+ extif_write32(extif, SSB_EXTIF_PROG_CFG, SSB_EXTCFG_EN);
|
||||
+
|
||||
+ /* Set timing for the flash */
|
||||
+ tmp = ceildiv(10, ns) << SSB_PROG_WCNT_3_SHIFT;
|
||||
+ tmp |= ceildiv(40, ns) << SSB_PROG_WCNT_1_SHIFT;
|
||||
+ tmp |= ceildiv(120, ns);
|
||||
+ tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;
|
||||
+ tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT;
|
||||
+ tmp |= DIV_ROUND_UP(120, ns);
|
||||
+ extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
|
||||
+
|
||||
+ /* Set programmable interface timing for external uart */
|
||||
+ tmp = ceildiv(10, ns) << SSB_PROG_WCNT_3_SHIFT;
|
||||
+ tmp |= ceildiv(20, ns) << SSB_PROG_WCNT_2_SHIFT;
|
||||
+ tmp |= ceildiv(100, ns) << SSB_PROG_WCNT_1_SHIFT;
|
||||
+ tmp |= ceildiv(120, ns);
|
||||
+ tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;
|
||||
+ tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT;
|
||||
+ tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT;
|
||||
+ tmp |= DIV_ROUND_UP(120, ns);
|
||||
+ extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
|
||||
+}
|
||||
|
||||
@ -217,10 +217,10 @@ Index: linux-2.6.22-rc4/drivers/ssb/driver_mipscore.c
|
||||
}
|
||||
+
|
||||
+EXPORT_SYMBOL(ssb_mips_irq);
|
||||
Index: linux-2.6.22-rc4/drivers/ssb/driver_pcicore.c
|
||||
Index: linux-2.6.22-rc5/drivers/ssb/driver_pcicore.c
|
||||
===================================================================
|
||||
--- linux-2.6.22-rc4.orig/drivers/ssb/driver_pcicore.c 2007-06-10 21:32:11.000000000 +0100
|
||||
+++ linux-2.6.22-rc4/drivers/ssb/driver_pcicore.c 2007-06-10 21:33:25.000000000 +0100
|
||||
--- linux-2.6.22-rc5.orig/drivers/ssb/driver_pcicore.c 2007-06-10 16:44:31.000000000 +0100
|
||||
+++ linux-2.6.22-rc5/drivers/ssb/driver_pcicore.c 2007-06-24 20:07:15.000000000 +0100
|
||||
@@ -93,6 +93,9 @@
|
||||
|
||||
/* Enable PCI bridge BAR1 prefetch and burst */
|
||||
@ -266,10 +266,10 @@ Index: linux-2.6.22-rc4/drivers/ssb/driver_pcicore.c
|
||||
register_pci_controller(&ssb_pcicore_controller);
|
||||
}
|
||||
|
||||
Index: linux-2.6.22-rc4/include/linux/ssb/ssb_driver_chipcommon.h
|
||||
Index: linux-2.6.22-rc5/include/linux/ssb/ssb_driver_chipcommon.h
|
||||
===================================================================
|
||||
--- linux-2.6.22-rc4.orig/include/linux/ssb/ssb_driver_chipcommon.h 2007-06-10 21:32:11.000000000 +0100
|
||||
+++ linux-2.6.22-rc4/include/linux/ssb/ssb_driver_chipcommon.h 2007-06-10 21:33:25.000000000 +0100
|
||||
--- linux-2.6.22-rc5.orig/include/linux/ssb/ssb_driver_chipcommon.h 2007-06-10 16:44:47.000000000 +0100
|
||||
+++ linux-2.6.22-rc5/include/linux/ssb/ssb_driver_chipcommon.h 2007-06-24 20:07:15.000000000 +0100
|
||||
@@ -364,6 +364,8 @@
|
||||
extern void ssb_chipco_suspend(struct ssb_chipcommon *cc, pm_message_t state);
|
||||
extern void ssb_chipco_resume(struct ssb_chipcommon *cc);
|
||||
@ -326,10 +326,10 @@ Index: linux-2.6.22-rc4/include/linux/ssb/ssb_driver_chipcommon.h
|
||||
#ifdef CONFIG_SSB_SERIAL
|
||||
extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
|
||||
struct ssb_serial_port *ports);
|
||||
Index: linux-2.6.22-rc4/include/linux/ssb/ssb_driver_extif.h
|
||||
Index: linux-2.6.22-rc5/include/linux/ssb/ssb_driver_extif.h
|
||||
===================================================================
|
||||
--- linux-2.6.22-rc4.orig/include/linux/ssb/ssb_driver_extif.h 2007-06-10 21:32:11.000000000 +0100
|
||||
+++ linux-2.6.22-rc4/include/linux/ssb/ssb_driver_extif.h 2007-06-10 21:33:25.000000000 +0100
|
||||
--- linux-2.6.22-rc5.orig/include/linux/ssb/ssb_driver_extif.h 2007-06-10 16:44:47.000000000 +0100
|
||||
+++ linux-2.6.22-rc5/include/linux/ssb/ssb_driver_extif.h 2007-06-24 20:07:15.000000000 +0100
|
||||
@@ -158,6 +158,36 @@
|
||||
/* watchdog */
|
||||
#define SSB_EXTIF_WATCHDOG_CLK 48000000 /* Hz */
|
||||
@ -367,10 +367,10 @@ Index: linux-2.6.22-rc4/include/linux/ssb/ssb_driver_extif.h
|
||||
|
||||
#endif /* __KERNEL__ */
|
||||
#endif /* LINUX_SSB_EXTIFCORE_H_ */
|
||||
Index: linux-2.6.22-rc4/include/linux/ssb/ssb_driver_mips.h
|
||||
Index: linux-2.6.22-rc5/include/linux/ssb/ssb_driver_mips.h
|
||||
===================================================================
|
||||
--- linux-2.6.22-rc4.orig/include/linux/ssb/ssb_driver_mips.h 2007-06-10 21:32:11.000000000 +0100
|
||||
+++ linux-2.6.22-rc4/include/linux/ssb/ssb_driver_mips.h 2007-06-10 21:33:25.000000000 +0100
|
||||
--- linux-2.6.22-rc5.orig/include/linux/ssb/ssb_driver_mips.h 2007-06-10 16:44:47.000000000 +0100
|
||||
+++ linux-2.6.22-rc5/include/linux/ssb/ssb_driver_mips.h 2007-06-24 20:07:15.000000000 +0100
|
||||
@@ -22,11 +22,13 @@
|
||||
int nr_serial_ports;
|
||||
struct ssb_serial_port serial_ports[4];
|
||||
@ -385,11 +385,11 @@ Index: linux-2.6.22-rc4/include/linux/ssb/ssb_driver_mips.h
|
||||
|
||||
extern unsigned int ssb_mips_irq(struct ssb_device *dev);
|
||||
|
||||
Index: linux-2.6.22-rc4/include/linux/ssb/ssb.h
|
||||
Index: linux-2.6.22-rc5/include/linux/ssb/ssb.h
|
||||
===================================================================
|
||||
--- linux-2.6.22-rc4.orig/include/linux/ssb/ssb.h 2007-06-10 21:32:11.000000000 +0100
|
||||
+++ linux-2.6.22-rc4/include/linux/ssb/ssb.h 2007-06-10 21:33:25.000000000 +0100
|
||||
@@ -263,6 +263,12 @@
|
||||
--- linux-2.6.22-rc5.orig/include/linux/ssb/ssb.h 2007-06-24 19:49:56.000000000 +0100
|
||||
+++ linux-2.6.22-rc5/include/linux/ssb/ssb.h 2007-06-24 20:07:15.000000000 +0100
|
||||
@@ -270,6 +270,12 @@
|
||||
#define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */
|
||||
#define SSB_CHIPPACK_BCM4712L 0 /* Large 340pin 4712 */
|
||||
|
||||
@ -402,7 +402,7 @@ Index: linux-2.6.22-rc4/include/linux/ssb/ssb.h
|
||||
#include <linux/ssb/ssb_driver_chipcommon.h>
|
||||
#include <linux/ssb/ssb_driver_mips.h>
|
||||
#include <linux/ssb/ssb_driver_extif.h>
|
||||
@@ -369,6 +375,16 @@
|
||||
@@ -388,6 +394,16 @@
|
||||
dev->ops->write32(dev, offset, value);
|
||||
}
|
||||
|
||||
|
@ -0,0 +1,33 @@
|
||||
Index: linux-2.6.22-rc5/arch/mips/bcm947xx/setup.c
|
||||
===================================================================
|
||||
--- linux-2.6.22-rc5.orig/arch/mips/bcm947xx/setup.c 2007-06-24 19:51:21.000000000 +0100
|
||||
+++ linux-2.6.22-rc5/arch/mips/bcm947xx/setup.c 2007-06-24 20:26:12.000000000 +0100
|
||||
@@ -107,13 +107,27 @@
|
||||
sprom->r1.et1phyaddr = simple_strtoul(s, NULL, 10);
|
||||
}
|
||||
|
||||
+static int bcm47xx_get_invariants(struct ssb_bus *bus, struct ssb_init_invariants *iv)
|
||||
+{
|
||||
+ char *s;
|
||||
+
|
||||
+ // TODO
|
||||
+ //iv->boardinfo.vendor =
|
||||
+ if ((s = nvram_get("boardtype")))
|
||||
+ iv->boardinfo.type = (u16)simple_strtoul(s, NULL, 0);
|
||||
+ if ((s = nvram_get("boardrev")))
|
||||
+ iv->boardinfo.rev = (u16)simple_strtoul(s, NULL, 0);
|
||||
+ bcm47xx_fill_sprom(&iv->sprom);
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
void __init plat_mem_setup(void)
|
||||
{
|
||||
int i, err;
|
||||
char *s;
|
||||
struct ssb_mipscore *mcore;
|
||||
|
||||
- err = ssb_bus_ssbbus_register(&ssb, SSB_ENUM_BASE, bcm47xx_fill_sprom);
|
||||
+ err = ssb_bus_ssbbus_register(&ssb, SSB_ENUM_BASE, bcm47xx_get_invariants);
|
||||
if (err) {
|
||||
const char *msg = "Failed to initialize SSB bus (err %d)\n";
|
||||
cfe_printk(msg, err); /* Make sure the message gets out of the box. */
|
Loading…
Reference in New Issue
Block a user