[adm5120] uses AMBA PL010 driver for the serial ports from now

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8159 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/adm5120-2.6/files/arch/mips/adm5120/Kconfig

@@ -9,4 +9,8 @@ config PCI_ADM5120
 
 endmenu
 
+config ARM_AMBA
+	bool
+	default y
+
 endif

target/linux/adm5120-2.6/files/arch/mips/adm5120/Makefile

@@ -3,11 +3,13 @@
 #
 
 obj-y	:= setup.o prom.o irq.o memory.o adm5120_info.o
-obj-y	+= gpio.o
-obj-y	+= time.o
-obj-y	+= reset.o
 obj-y	+= board.o
+obj-y	+= clock.o
+obj-y	+= gpio.o
 obj-y	+= platform.o
+obj-y	+= reset.o
+obj-y	+= time.o
+
 obj-y	+= trxsplit.o
 
 EXTRA_AFLAGS := $(CFLAGS)

target/linux/adm5120-2.6/files/arch/mips/adm5120/board.c

@@ -33,6 +33,7 @@
 
 #include <asm/mach-adm5120/adm5120_info.h>
 #include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_irq.h>
 #include <asm/mach-adm5120/adm5120_board.h>
 #include <asm/mach-adm5120/adm5120_platform.h>
 
@@ -87,6 +88,10 @@ static int __init adm5120_board_setup(void)
 	if (board->board_setup)
 		board->board_setup();
 
+	/* register UARTs */
+	amba_device_register(&adm5120_uart0_device, &iomem_resource);
+	amba_device_register(&adm5120_uart1_device, &iomem_resource);
+
 	/* register PCI controller */
 	if (adm5120_package_bga())
 		platform_device_register(&adm5120_pci_device);

target/linux/adm5120-2.6/files/arch/mips/adm5120/clock.c

@@ -0,0 +1,76 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 minimal CLK API implementation
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This file was based on the CLK API implementation in:
+ *	arch/mips/tx4938/toshiba_rbtx4938/setup.c
+ *	Copyright (C) 2000-2001 Toshiba Corporation
+ *	2003-2005 (c) MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+
+struct clk {
+	unsigned long rate;
+};
+
+static struct clk uart_clk = {
+	.rate = ADM5120_UART_CLOCK
+};
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+       if (!strcmp(id, "UARTCLK"))
+               return &uart_clk;
+
+       return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+int clk_enable(struct clk *clk)
+{
+       return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+       return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);

target/linux/adm5120-2.6/files/arch/mips/adm5120/platform.c

@@ -38,6 +38,9 @@
 #include <asm/mach-adm5120/adm5120_switch.h>
 #include <asm/mach-adm5120/adm5120_platform.h>
 
+static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base,
+		unsigned int mctrl);
+
 #if 1
 /*
  * TODO:remove global adm5120_eth* variables when the switch driver will be
@@ -128,3 +131,45 @@ struct platform_device adm5120_nand_device = {
 	.num_resources	= ARRAY_SIZE(adm5120_nand_resource),
 	.resource	= adm5120_nand_resource,
 };
+
+/* built-in UARTs */
+struct amba_pl010_data adm5120_uart0_data = {
+	.set_mctrl = adm5120_uart_set_mctrl
+};
+
+struct amba_device adm5120_uart0_device = {
+	.dev		= {
+		.bus_id	= "APB:UART0",
+		.platform_data = &adm5120_uart0_data,
+	},
+	.res		= {
+		.start	= ADM5120_UART0_BASE,
+		.end	= ADM5120_UART0_BASE + ADM5120_UART_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= { ADM5120_IRQ_UART0, -1 },
+	.periphid	= 0x0041010,
+};
+
+struct amba_pl010_data adm5120_uart1_data = {
+	.set_mctrl = adm5120_uart_set_mctrl
+};
+
+struct amba_device adm5120_uart1_device = {
+	.dev		= {
+		.bus_id	= "APB:UART1",
+		.platform_data = &adm5120_uart1_data,
+	},
+	.res		= {
+		.start	= ADM5120_UART1_BASE,
+		.end	= ADM5120_UART1_BASE + ADM5120_UART_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= { ADM5120_IRQ_UART1, -1 },
+	.periphid	= 0x0041010,
+};
+
+static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base,
+		unsigned int mctrl)
+{
+}