mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-08-20 04:48:57 +03:00
[adm5120] uses AMBA PL010 driver for the serial ports from now
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8159 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
parent
10b2579edb
commit
87f5e12cd0
@ -1,10 +1,10 @@
|
||||
CONFIG_32BIT=y
|
||||
# CONFIG_64BIT is not set
|
||||
# CONFIG_64BIT_PHYS_ADDR is not set
|
||||
CONFIG_ADM5120_NR_UARTS=2
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
CONFIG_ARM_AMBA=y
|
||||
# CONFIG_ATM_DRIVERS is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
CONFIG_BAYCOM_SER_FDX=m
|
||||
@ -207,8 +207,14 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
||||
CONFIG_SCSI_WAIT_SCAN=m
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
CONFIG_SERIAL_ADM5120=y
|
||||
# CONFIG_SERIAL_ADM5120 is not set
|
||||
CONFIG_SERIAL_AMBA_PL010=y
|
||||
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
|
||||
CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
|
||||
CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
|
||||
# CONFIG_SERIAL_AMBA_PL011 is not set
|
||||
CONFIG_SERIO=y
|
||||
# CONFIG_SERIO_AMBAKMI is not set
|
||||
# CONFIG_SERIO_I8042 is not set
|
||||
# CONFIG_SERIO_LIBPS2 is not set
|
||||
# CONFIG_SERIO_PCIPS2 is not set
|
||||
|
@ -9,4 +9,8 @@ config PCI_ADM5120
|
||||
|
||||
endmenu
|
||||
|
||||
config ARM_AMBA
|
||||
bool
|
||||
default y
|
||||
|
||||
endif
|
||||
|
@ -3,11 +3,13 @@
|
||||
#
|
||||
|
||||
obj-y := setup.o prom.o irq.o memory.o adm5120_info.o
|
||||
obj-y += gpio.o
|
||||
obj-y += time.o
|
||||
obj-y += reset.o
|
||||
obj-y += board.o
|
||||
obj-y += clock.o
|
||||
obj-y += gpio.o
|
||||
obj-y += platform.o
|
||||
obj-y += reset.o
|
||||
obj-y += time.o
|
||||
|
||||
obj-y += trxsplit.o
|
||||
|
||||
EXTRA_AFLAGS := $(CFLAGS)
|
||||
|
@ -33,6 +33,7 @@
|
||||
|
||||
#include <asm/mach-adm5120/adm5120_info.h>
|
||||
#include <asm/mach-adm5120/adm5120_defs.h>
|
||||
#include <asm/mach-adm5120/adm5120_irq.h>
|
||||
#include <asm/mach-adm5120/adm5120_board.h>
|
||||
#include <asm/mach-adm5120/adm5120_platform.h>
|
||||
|
||||
@ -87,6 +88,10 @@ static int __init adm5120_board_setup(void)
|
||||
if (board->board_setup)
|
||||
board->board_setup();
|
||||
|
||||
/* register UARTs */
|
||||
amba_device_register(&adm5120_uart0_device, &iomem_resource);
|
||||
amba_device_register(&adm5120_uart1_device, &iomem_resource);
|
||||
|
||||
/* register PCI controller */
|
||||
if (adm5120_package_bga())
|
||||
platform_device_register(&adm5120_pci_device);
|
||||
|
76
target/linux/adm5120-2.6/files/arch/mips/adm5120/clock.c
Normal file
76
target/linux/adm5120-2.6/files/arch/mips/adm5120/clock.c
Normal file
@ -0,0 +1,76 @@
|
||||
/*
|
||||
* $Id$
|
||||
*
|
||||
* ADM5120 minimal CLK API implementation
|
||||
*
|
||||
* Copyright (C) 2007 OpenWrt.org
|
||||
* Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
|
||||
*
|
||||
* This file was based on the CLK API implementation in:
|
||||
* arch/mips/tx4938/toshiba_rbtx4938/setup.c
|
||||
* Copyright (C) 2000-2001 Toshiba Corporation
|
||||
* 2003-2005 (c) MontaVista Software, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the
|
||||
* Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
|
||||
* Boston, MA 02110-1301, USA.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/string.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/clk.h>
|
||||
|
||||
#include <asm/mach-adm5120/adm5120_defs.h>
|
||||
|
||||
struct clk {
|
||||
unsigned long rate;
|
||||
};
|
||||
|
||||
static struct clk uart_clk = {
|
||||
.rate = ADM5120_UART_CLOCK
|
||||
};
|
||||
|
||||
struct clk *clk_get(struct device *dev, const char *id)
|
||||
{
|
||||
if (!strcmp(id, "UARTCLK"))
|
||||
return &uart_clk;
|
||||
|
||||
return ERR_PTR(-ENOENT);
|
||||
}
|
||||
EXPORT_SYMBOL(clk_get);
|
||||
|
||||
int clk_enable(struct clk *clk)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL(clk_enable);
|
||||
|
||||
void clk_disable(struct clk *clk)
|
||||
{
|
||||
}
|
||||
EXPORT_SYMBOL(clk_disable);
|
||||
|
||||
unsigned long clk_get_rate(struct clk *clk)
|
||||
{
|
||||
return clk->rate;
|
||||
}
|
||||
EXPORT_SYMBOL(clk_get_rate);
|
||||
|
||||
void clk_put(struct clk *clk)
|
||||
{
|
||||
}
|
||||
EXPORT_SYMBOL(clk_put);
|
@ -38,6 +38,9 @@
|
||||
#include <asm/mach-adm5120/adm5120_switch.h>
|
||||
#include <asm/mach-adm5120/adm5120_platform.h>
|
||||
|
||||
static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base,
|
||||
unsigned int mctrl);
|
||||
|
||||
#if 1
|
||||
/*
|
||||
* TODO:remove global adm5120_eth* variables when the switch driver will be
|
||||
@ -128,3 +131,45 @@ struct platform_device adm5120_nand_device = {
|
||||
.num_resources = ARRAY_SIZE(adm5120_nand_resource),
|
||||
.resource = adm5120_nand_resource,
|
||||
};
|
||||
|
||||
/* built-in UARTs */
|
||||
struct amba_pl010_data adm5120_uart0_data = {
|
||||
.set_mctrl = adm5120_uart_set_mctrl
|
||||
};
|
||||
|
||||
struct amba_device adm5120_uart0_device = {
|
||||
.dev = {
|
||||
.bus_id = "APB:UART0",
|
||||
.platform_data = &adm5120_uart0_data,
|
||||
},
|
||||
.res = {
|
||||
.start = ADM5120_UART0_BASE,
|
||||
.end = ADM5120_UART0_BASE + ADM5120_UART_SIZE - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
.irq = { ADM5120_IRQ_UART0, -1 },
|
||||
.periphid = 0x0041010,
|
||||
};
|
||||
|
||||
struct amba_pl010_data adm5120_uart1_data = {
|
||||
.set_mctrl = adm5120_uart_set_mctrl
|
||||
};
|
||||
|
||||
struct amba_device adm5120_uart1_device = {
|
||||
.dev = {
|
||||
.bus_id = "APB:UART1",
|
||||
.platform_data = &adm5120_uart1_data,
|
||||
},
|
||||
.res = {
|
||||
.start = ADM5120_UART1_BASE,
|
||||
.end = ADM5120_UART1_BASE + ADM5120_UART_SIZE - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
.irq = { ADM5120_IRQ_UART1, -1 },
|
||||
.periphid = 0x0041010,
|
||||
};
|
||||
|
||||
static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base,
|
||||
unsigned int mctrl)
|
||||
{
|
||||
}
|
||||
|
@ -25,10 +25,16 @@
|
||||
#ifndef _ADM5120_PLATFORM_H_
|
||||
#define _ADM5120_PLATFORM_H_
|
||||
|
||||
#include <linux/device.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/map.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
|
||||
#include <linux/amba/bus.h>
|
||||
#include <linux/amba/serial.h>
|
||||
|
||||
struct adm5120_flash_platform_data {
|
||||
void (*set_vpp)(struct map_info *, int);
|
||||
void (*switch_bank)(unsigned);
|
||||
@ -63,6 +69,8 @@ extern struct adm5120_flash_platform_data adm5120_flash1_data;
|
||||
extern struct adm5120_nand_platform_data adm5120_nand_data;
|
||||
extern struct adm5120_pci_platform_data adm5120_pci_data;
|
||||
extern struct adm5120_switch_platform_data adm5120_switch_data;
|
||||
extern struct amba_pl010_data adm5120_uart0_data;
|
||||
extern struct amba_pl010_data adm5120_uart1_data;
|
||||
|
||||
extern struct platform_device adm5120_flash0_device;
|
||||
extern struct platform_device adm5120_flash1_device;
|
||||
@ -70,5 +78,8 @@ extern struct platform_device adm5120_nand_device;
|
||||
extern struct platform_device adm5120_usbc_device;
|
||||
extern struct platform_device adm5120_pci_device;
|
||||
extern struct platform_device adm5120_switch_device;
|
||||
extern struct amba_device adm5120_uart0_device;
|
||||
extern struct amba_device adm5120_uart1_device;
|
||||
|
||||
|
||||
#endif /* _ADM5120_PLATFORM_H_ */
|
||||
|
@ -0,0 +1,56 @@
|
||||
/*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
/* DO NOT EDIT!! - this file automatically generated
|
||||
* from .s file by awk -f s2h.awk
|
||||
*/
|
||||
/* Size definitions
|
||||
* Copyright (C) ARM Limited 1998. All rights reserved.
|
||||
*/
|
||||
|
||||
#ifndef __sizes_h
|
||||
#define __sizes_h 1
|
||||
|
||||
/* handy sizes */
|
||||
#define SZ_16 0x00000010
|
||||
#define SZ_256 0x00000100
|
||||
#define SZ_512 0x00000200
|
||||
|
||||
#define SZ_1K 0x00000400
|
||||
#define SZ_4K 0x00001000
|
||||
#define SZ_8K 0x00002000
|
||||
#define SZ_16K 0x00004000
|
||||
#define SZ_64K 0x00010000
|
||||
#define SZ_128K 0x00020000
|
||||
#define SZ_256K 0x00040000
|
||||
#define SZ_512K 0x00080000
|
||||
|
||||
#define SZ_1M 0x00100000
|
||||
#define SZ_2M 0x00200000
|
||||
#define SZ_4M 0x00400000
|
||||
#define SZ_8M 0x00800000
|
||||
#define SZ_16M 0x01000000
|
||||
#define SZ_32M 0x02000000
|
||||
#define SZ_64M 0x04000000
|
||||
#define SZ_128M 0x08000000
|
||||
#define SZ_256M 0x10000000
|
||||
#define SZ_512M 0x20000000
|
||||
|
||||
#define SZ_1G 0x40000000
|
||||
#define SZ_2G 0x80000000
|
||||
|
||||
#endif
|
||||
|
||||
/* END */
|
@ -0,0 +1,297 @@
|
||||
Index: linux/drivers/serial/amba-pl010.c
|
||||
===================================================================
|
||||
--- linux.orig/drivers/serial/amba-pl010.c
|
||||
+++ linux/drivers/serial/amba-pl010.c
|
||||
@@ -52,11 +52,10 @@
|
||||
|
||||
#include <asm/io.h>
|
||||
|
||||
-#define UART_NR 8
|
||||
-
|
||||
#define SERIAL_AMBA_MAJOR 204
|
||||
#define SERIAL_AMBA_MINOR 16
|
||||
-#define SERIAL_AMBA_NR UART_NR
|
||||
+#define SERIAL_AMBA_NR CONFIG_SERIAL_AMBA_PL010_NUMPORTS
|
||||
+#define SERIAL_AMBA_NAME CONFIG_SERIAL_AMBA_PL010_PORTNAME
|
||||
|
||||
#define AMBA_ISR_PASS_LIMIT 256
|
||||
|
||||
@@ -82,7 +81,7 @@ static void pl010_stop_tx(struct uart_po
|
||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
||||
unsigned int cr;
|
||||
|
||||
- cr = readb(uap->port.membase + UART010_CR);
|
||||
+ cr = readl(uap->port.membase + UART010_CR);
|
||||
cr &= ~UART010_CR_TIE;
|
||||
writel(cr, uap->port.membase + UART010_CR);
|
||||
}
|
||||
@@ -92,7 +91,7 @@ static void pl010_start_tx(struct uart_p
|
||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
||||
unsigned int cr;
|
||||
|
||||
- cr = readb(uap->port.membase + UART010_CR);
|
||||
+ cr = readl(uap->port.membase + UART010_CR);
|
||||
cr |= UART010_CR_TIE;
|
||||
writel(cr, uap->port.membase + UART010_CR);
|
||||
}
|
||||
@@ -102,7 +101,7 @@ static void pl010_stop_rx(struct uart_po
|
||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
||||
unsigned int cr;
|
||||
|
||||
- cr = readb(uap->port.membase + UART010_CR);
|
||||
+ cr = readl(uap->port.membase + UART010_CR);
|
||||
cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
|
||||
writel(cr, uap->port.membase + UART010_CR);
|
||||
}
|
||||
@@ -112,7 +111,7 @@ static void pl010_enable_ms(struct uart_
|
||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
||||
unsigned int cr;
|
||||
|
||||
- cr = readb(uap->port.membase + UART010_CR);
|
||||
+ cr = readl(uap->port.membase + UART010_CR);
|
||||
cr |= UART010_CR_MSIE;
|
||||
writel(cr, uap->port.membase + UART010_CR);
|
||||
}
|
||||
@@ -122,9 +121,9 @@ static void pl010_rx_chars(struct uart_a
|
||||
struct tty_struct *tty = uap->port.info->tty;
|
||||
unsigned int status, ch, flag, rsr, max_count = 256;
|
||||
|
||||
- status = readb(uap->port.membase + UART01x_FR);
|
||||
+ status = readl(uap->port.membase + UART01x_FR);
|
||||
while (UART_RX_DATA(status) && max_count--) {
|
||||
- ch = readb(uap->port.membase + UART01x_DR);
|
||||
+ ch = readl(uap->port.membase + UART01x_DR);
|
||||
flag = TTY_NORMAL;
|
||||
|
||||
uap->port.icount.rx++;
|
||||
@@ -133,7 +132,7 @@ static void pl010_rx_chars(struct uart_a
|
||||
* Note that the error handling code is
|
||||
* out of the main execution path
|
||||
*/
|
||||
- rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
|
||||
+ rsr = readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
|
||||
if (unlikely(rsr & UART01x_RSR_ANY)) {
|
||||
writel(0, uap->port.membase + UART01x_ECR);
|
||||
|
||||
@@ -165,7 +164,7 @@ static void pl010_rx_chars(struct uart_a
|
||||
uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
|
||||
|
||||
ignore_char:
|
||||
- status = readb(uap->port.membase + UART01x_FR);
|
||||
+ status = readl(uap->port.membase + UART01x_FR);
|
||||
}
|
||||
spin_unlock(&uap->port.lock);
|
||||
tty_flip_buffer_push(tty);
|
||||
@@ -210,7 +209,7 @@ static void pl010_modem_status(struct ua
|
||||
|
||||
writel(0, uap->port.membase + UART010_ICR);
|
||||
|
||||
- status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
||||
+ status = readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
||||
|
||||
delta = status ^ uap->old_status;
|
||||
uap->old_status = status;
|
||||
@@ -238,7 +237,7 @@ static irqreturn_t pl010_int(int irq, vo
|
||||
|
||||
spin_lock(&uap->port.lock);
|
||||
|
||||
- status = readb(uap->port.membase + UART010_IIR);
|
||||
+ status = readl(uap->port.membase + UART010_IIR);
|
||||
if (status) {
|
||||
do {
|
||||
if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
|
||||
@@ -251,7 +250,7 @@ static irqreturn_t pl010_int(int irq, vo
|
||||
if (pass_counter-- == 0)
|
||||
break;
|
||||
|
||||
- status = readb(uap->port.membase + UART010_IIR);
|
||||
+ status = readl(uap->port.membase + UART010_IIR);
|
||||
} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
|
||||
UART010_IIR_TIS));
|
||||
handled = 1;
|
||||
@@ -265,7 +264,7 @@ static irqreturn_t pl010_int(int irq, vo
|
||||
static unsigned int pl010_tx_empty(struct uart_port *port)
|
||||
{
|
||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
||||
- unsigned int status = readb(uap->port.membase + UART01x_FR);
|
||||
+ unsigned int status = readl(uap->port.membase + UART01x_FR);
|
||||
return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
|
||||
}
|
||||
|
||||
@@ -275,7 +274,7 @@ static unsigned int pl010_get_mctrl(stru
|
||||
unsigned int result = 0;
|
||||
unsigned int status;
|
||||
|
||||
- status = readb(uap->port.membase + UART01x_FR);
|
||||
+ status = readl(uap->port.membase + UART01x_FR);
|
||||
if (status & UART01x_FR_DCD)
|
||||
result |= TIOCM_CAR;
|
||||
if (status & UART01x_FR_DSR)
|
||||
@@ -301,7 +300,7 @@ static void pl010_break_ctl(struct uart_
|
||||
unsigned int lcr_h;
|
||||
|
||||
spin_lock_irqsave(&uap->port.lock, flags);
|
||||
- lcr_h = readb(uap->port.membase + UART010_LCRH);
|
||||
+ lcr_h = readl(uap->port.membase + UART010_LCRH);
|
||||
if (break_state == -1)
|
||||
lcr_h |= UART01x_LCRH_BRK;
|
||||
else
|
||||
@@ -334,7 +333,7 @@ static int pl010_startup(struct uart_por
|
||||
/*
|
||||
* initialise the old status of the modem signals
|
||||
*/
|
||||
- uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
||||
+ uap->old_status = readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
||||
|
||||
/*
|
||||
* Finally, enable interrupts
|
||||
@@ -365,7 +364,7 @@ static void pl010_shutdown(struct uart_p
|
||||
writel(0, uap->port.membase + UART010_CR);
|
||||
|
||||
/* disable break condition and fifos */
|
||||
- writel(readb(uap->port.membase + UART010_LCRH) &
|
||||
+ writel(readl(uap->port.membase + UART010_LCRH) &
|
||||
~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
|
||||
uap->port.membase + UART010_LCRH);
|
||||
|
||||
@@ -387,7 +386,7 @@ pl010_set_termios(struct uart_port *port
|
||||
/*
|
||||
* Ask the core to calculate the divisor for us.
|
||||
*/
|
||||
- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
|
||||
+ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
|
||||
quot = uart_get_divisor(port, baud);
|
||||
|
||||
switch (termios->c_cflag & CSIZE) {
|
||||
@@ -450,7 +449,7 @@ pl010_set_termios(struct uart_port *port
|
||||
uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
|
||||
|
||||
/* first, disable everything */
|
||||
- old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
|
||||
+ old_cr = readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
|
||||
|
||||
if (UART_ENABLE_MS(port, termios->c_cflag))
|
||||
old_cr |= UART010_CR_MSIE;
|
||||
@@ -540,7 +539,7 @@ static struct uart_ops amba_pl010_pops =
|
||||
.verify_port = pl010_verify_port,
|
||||
};
|
||||
|
||||
-static struct uart_amba_port *amba_ports[UART_NR];
|
||||
+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
|
||||
|
||||
#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
|
||||
|
||||
@@ -550,7 +549,7 @@ static void pl010_console_putchar(struct
|
||||
unsigned int status;
|
||||
|
||||
do {
|
||||
- status = readb(uap->port.membase + UART01x_FR);
|
||||
+ status = readl(uap->port.membase + UART01x_FR);
|
||||
barrier();
|
||||
} while (!UART_TX_READY(status));
|
||||
writel(ch, uap->port.membase + UART01x_DR);
|
||||
@@ -567,7 +566,7 @@ pl010_console_write(struct console *co,
|
||||
/*
|
||||
* First save the CR then disable the interrupts
|
||||
*/
|
||||
- old_cr = readb(uap->port.membase + UART010_CR);
|
||||
+ old_cr = readl(uap->port.membase + UART010_CR);
|
||||
writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
|
||||
|
||||
uart_console_write(&uap->port, s, count, pl010_console_putchar);
|
||||
@@ -577,7 +576,7 @@ pl010_console_write(struct console *co,
|
||||
* and restore the TCR
|
||||
*/
|
||||
do {
|
||||
- status = readb(uap->port.membase + UART01x_FR);
|
||||
+ status = readl(uap->port.membase + UART01x_FR);
|
||||
barrier();
|
||||
} while (status & UART01x_FR_BUSY);
|
||||
writel(old_cr, uap->port.membase + UART010_CR);
|
||||
@@ -589,9 +588,9 @@ static void __init
|
||||
pl010_console_get_options(struct uart_amba_port *uap, int *baud,
|
||||
int *parity, int *bits)
|
||||
{
|
||||
- if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
|
||||
+ if (readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
|
||||
unsigned int lcr_h, quot;
|
||||
- lcr_h = readb(uap->port.membase + UART010_LCRH);
|
||||
+ lcr_h = readl(uap->port.membase + UART010_LCRH);
|
||||
|
||||
*parity = 'n';
|
||||
if (lcr_h & UART01x_LCRH_PEN) {
|
||||
@@ -606,8 +605,8 @@ pl010_console_get_options(struct uart_am
|
||||
else
|
||||
*bits = 8;
|
||||
|
||||
- quot = readb(uap->port.membase + UART010_LCRL) |
|
||||
- readb(uap->port.membase + UART010_LCRM) << 8;
|
||||
+ quot = readl(uap->port.membase + UART010_LCRL) |
|
||||
+ readl(uap->port.membase + UART010_LCRM) << 8;
|
||||
*baud = uap->port.uartclk / (16 * (quot + 1));
|
||||
}
|
||||
}
|
||||
@@ -625,7 +624,7 @@ static int __init pl010_console_setup(st
|
||||
* if so, search for the first available port that does have
|
||||
* console support.
|
||||
*/
|
||||
- if (co->index >= UART_NR)
|
||||
+ if (co->index >= SERIAL_AMBA_NR)
|
||||
co->index = 0;
|
||||
uap = amba_ports[co->index];
|
||||
if (!uap)
|
||||
@@ -643,7 +642,7 @@ static int __init pl010_console_setup(st
|
||||
|
||||
static struct uart_driver amba_reg;
|
||||
static struct console amba_console = {
|
||||
- .name = "ttyAM",
|
||||
+ .name = SERIAL_AMBA_NAME,
|
||||
.write = pl010_console_write,
|
||||
.device = uart_console_device,
|
||||
.setup = pl010_console_setup,
|
||||
@@ -659,11 +658,11 @@ static struct console amba_console = {
|
||||
|
||||
static struct uart_driver amba_reg = {
|
||||
.owner = THIS_MODULE,
|
||||
- .driver_name = "ttyAM",
|
||||
- .dev_name = "ttyAM",
|
||||
+ .driver_name = SERIAL_AMBA_NAME,
|
||||
+ .dev_name = SERIAL_AMBA_NAME,
|
||||
.major = SERIAL_AMBA_MAJOR,
|
||||
.minor = SERIAL_AMBA_MINOR,
|
||||
- .nr = UART_NR,
|
||||
+ .nr = SERIAL_AMBA_NR,
|
||||
.cons = AMBA_CONSOLE,
|
||||
};
|
||||
|
||||
Index: linux/drivers/serial/Kconfig
|
||||
===================================================================
|
||||
--- linux.orig/drivers/serial/Kconfig
|
||||
+++ linux/drivers/serial/Kconfig
|
||||
@@ -293,10 +293,25 @@ config SERIAL_AMBA_PL010
|
||||
help
|
||||
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
|
||||
an Integrator/AP or Integrator/PP2 platform, or if you have a
|
||||
- Cirrus Logic EP93xx CPU, say Y or M here.
|
||||
+ Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
+config SERIAL_AMBA_PL010_NUMPORTS
|
||||
+ int "Maximum number of AMBA PL010 serial ports"
|
||||
+ depends on SERIAL_AMBA_PL010
|
||||
+ default "8"
|
||||
+ ---help---
|
||||
+ Set this to the number of serial ports you want the AMBA PL010 driver
|
||||
+ to support.
|
||||
+
|
||||
+config SERIAL_AMBA_PL010_PORTNAME
|
||||
+ string "Name of the AMBA PL010 serial ports"
|
||||
+ depends on SERIAL_AMBA_PL010
|
||||
+ default "ttyAM"
|
||||
+ ---help---
|
||||
+ ::: To be written :::
|
||||
+
|
||||
config SERIAL_AMBA_PL010_CONSOLE
|
||||
bool "Support for console on AMBA serial port"
|
||||
depends on SERIAL_AMBA_PL010=y
|
@ -0,0 +1,15 @@
|
||||
Index: linux/drivers/amba/bus.c
|
||||
===================================================================
|
||||
--- linux.orig/drivers/amba/bus.c
|
||||
+++ linux/drivers/amba/bus.c
|
||||
@@ -17,6 +17,10 @@
|
||||
#include <asm/io.h>
|
||||
#include <asm/sizes.h>
|
||||
|
||||
+#ifndef NO_IRQ
|
||||
+#define NO_IRQ (-1)
|
||||
+#endif
|
||||
+
|
||||
#define to_amba_device(d) container_of(d, struct amba_device, dev)
|
||||
#define to_amba_driver(d) container_of(d, struct amba_driver, drv)
|
||||
|
@ -1,10 +1,10 @@
|
||||
CONFIG_32BIT=y
|
||||
# CONFIG_64BIT is not set
|
||||
# CONFIG_64BIT_PHYS_ADDR is not set
|
||||
CONFIG_ADM5120_NR_UARTS=2
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
CONFIG_ARM_AMBA=y
|
||||
# CONFIG_ATM_DRIVERS is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
CONFIG_BAYCOM_SER_FDX=m
|
||||
@ -200,8 +200,14 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
||||
CONFIG_SCSI_WAIT_SCAN=m
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
CONFIG_SERIAL_ADM5120=y
|
||||
# CONFIG_SERIAL_ADM5120 is not set
|
||||
CONFIG_SERIAL_AMBA_PL010=y
|
||||
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
|
||||
CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
|
||||
CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
|
||||
# CONFIG_SERIAL_AMBA_PL011 is not set
|
||||
CONFIG_SERIO=y
|
||||
# CONFIG_SERIO_AMBAKMI is not set
|
||||
# CONFIG_SERIO_I8042 is not set
|
||||
# CONFIG_SERIO_LIBPS2 is not set
|
||||
# CONFIG_SERIO_PCIPS2 is not set
|
||||
|
Loading…
Reference in New Issue
Block a user