1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-24 19:46:46 +02:00

backfire: ar71xx: Configure WNDR3700 switch LED colors properly (backport of r23879)

For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on
the four LAN port switch LEDs. The LEDs will be lit to indicate a link
and will blink to indicate activity. This matches the stock firmware
and the description printed on the label on the unit's underside.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24960 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
juhosg 2011-01-10 18:07:51 +00:00
parent 519a3eff27
commit 89a59ff8b7

View File

@ -32,15 +32,15 @@ config switch_port
# the switch and the section does not correspond to a real
# switch port.
#
# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3-1000MB/s
# 4=100 MB/s; 5=10 MB/s; 6=1000 MB/s+activity; 7=100 MB/s+activity
# 8=10 MB/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
# 14: Link (master); 15: separate register
option device rtl8366s
option port 1
option led 9
option led 6
config switch_port
# Port 2 controls the ORANGE configuration of LEDs for
@ -52,8 +52,7 @@ config switch_port
option device rtl8366s
option port 2
option led 6
option led 9
config switch_port
# Port 5 controls the configuration of the WAN LED and the
@ -67,5 +66,4 @@ config switch_port
option device rtl8366s
option port 5
option led 6
option led 2