diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v11/cpuinfo.txt b/openwrt/docs/hardware/linksys/wrt54gs_v11/cpuinfo.txt new file mode 100644 index 000000000..8a5ba8fd9 --- /dev/null +++ b/openwrt/docs/hardware/linksys/wrt54gs_v11/cpuinfo.txt @@ -0,0 +1,11 @@ +system type : Broadcom BCM947XX +processor : 0 +cpu model : BCM3302 V0.7 +BogoMIPS : 215.44 +wait instruction : no +microsecond timers : yes +tlb_entries : 32 +extra interrupt vector : no +hardware watchpoint : no +VCED exceptions : not available +VCEI exceptions : not available diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt b/openwrt/docs/hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt new file mode 100644 index 000000000..22afd53dc --- /dev/null +++ b/openwrt/docs/hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt @@ -0,0 +1,83 @@ +CPU revision is: 00029007 +Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. +Primary data cache 4kB, 2-way, linesize 16 bytes. +Linux version 2.4.30 (kaloz@richese) (gcc version 3.4.3) #1 2005. máj. 20., péntek, 16.07.34 CEST +Determined physical RAM map: + memory: 02000000 @ 00000000 (usable) +On node 0 totalpages: 8192 +zone(0): 8192 pages. +zone(1): 0 pages. +zone(2): 0 pages. +Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200 +CPU: BCM4712 rev 1 at 216 MHz +Using 108.000 MHz high precision timer. +Calibrating delay loop... 215.44 BogoMIPS +Memory: 30256k/32768k available (1512k kernel code, 2512k reserved, 104k data, 88k init, 0k highmem) +Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) +Inode cache hash table entries: 2048 (order: 2, 16384 bytes) +Mount cache hash table entries: 512 (order: 0, 4096 bytes) +Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) +Page-cache hash table entries: 8192 (order: 3, 32768 bytes) +Checking for 'wait' instruction... unavailable. +POSIX conformance testing by UNIFIX +PCI: Disabled +PCI: Fixing up bus 0 +Linux NET4.0 for Linux 2.4 +Based upon Swansea University Computer Society NET3.039 +Initializing RT netlink socket +Starting kswapd +devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) +devfs: boot_options: 0x1 +JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. +Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher +pty: 256 Unix98 ptys configured +Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled +ttyS00 at 0xb8000300 (irq = 3) is a 16550A +ttyS01 at 0xb8000400 (irq = 0) is a 16550A +Software Watchdog Timer: 0.05, timer margin: 60 sec +loop: loaded (max 8 devices) +Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 +cfi_cmdset_0001: Erase suspend on write enabled +0: offset=0x0,size=0x20000,blocks=64 +Using buffer write method +Flash device: 0x800000 at 0x1c000000 +Creating 4 MTD partitions on "Physically mapped flash": +0x00000000-0x00040000 : "pmon" +0x00040000-0x007e0000 : "linux" +0x000c0000-0x007e0000 : "rootfs" +0x007e0000-0x00800000 : "nvram" +Initializing Cryptographic API +NET4: Linux TCP/IP 1.0 for NET4.0 +IP Protocols: ICMP, UDP, TCP, IGMP +IP: routing cache hash table of 512 buckets, 4Kbytes +TCP: Hash tables configured (established 2048 bind 4096) +ip_conntrack version 2.1 (5953 buckets, 5953 max) - 316 bytes per conntrack +ip_tables: (C) 2000-2002 Netfilter core team +NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. +NET4: Ethernet Bridge 008 for NET4.0 +Bridge firewalling registered +802.1Q VLAN Support v1.8 Ben Greear +All bugs added by David S. Miller +VFS: Mounted root (jffs2 filesystem) readonly. +Mounted devfs on /dev +Freeing unused kernel memory: 88k freed +Algorithmics/MIPS FPU Emulator v1.5 +diag boardtype: 00000708 +jffs2.bbc: SIZE compression mode activated. +b44.c:v0.93 (Mar, 2004) +PCI: Setting latency timer of device 00:02.0 to 64 +eth0: Broadcom 47xx 10/100BaseT Ethernet 00:13:10:07:ee:fc +PCI: Setting latency timer of device 00:01.0 to 64 +eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 +device eth0 entered promiscuous mode +vlan0: add 01:00:5e:00:00:01 mcast address to master interface +device eth1 entered promiscuous mode +br0: port 2(eth1) entering learning state +br0: port 1(vlan0) entering learning state +br0: port 2(eth1) entering forwarding state +br0: topology change detected, propagating +br0: port 1(vlan0) entering forwarding state +br0: topology change detected, propagating +vlan1: add 01:00:5e:00:00:01 mcast address to master interface diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt b/openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt new file mode 100644 index 000000000..325f4cd73 --- /dev/null +++ b/openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt @@ -0,0 +1,21 @@ +Linksys WRT54GS v1.1 + +Online Description from Linksys: +http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=610 + +CPU: BCM4712 at 216 MHz +RAM: 32 MB +Flash: 8 MB +1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller +1 Broadcom BCM4320 802.11 Wireless Controller +serial port possible +JTAG interface + +List of files: +nvram.txt: contents of NVRAM after nvram erase and adjusted cpu speed +cpuinfo.txt: contents of /proc/cpuinfo with adjusted cpu speed (2.4.30) +pci.txt: contents of /proc/pci (2.4.30) +dmesg-2_4_30.txt: dmesg from Kernel 2.4.30 (using b44 and robocfg) + +Notes: +CPU runs at 200MHz default, You should adjust it to 216Mhz, as that fixes the problems during high network load. diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v11/nvram.txt b/openwrt/docs/hardware/linksys/wrt54gs_v11/nvram.txt new file mode 100644 index 000000000..9baf982af --- /dev/null +++ b/openwrt/docs/hardware/linksys/wrt54gs_v11/nvram.txt @@ -0,0 +1,94 @@ +wl0_net_mode=mixed +os_ram_addr=80001000 +wl0_frameburst=off +boardrev=0x10 +il0macaddr=00:13:10:07:ee:fe +bootnv_ver=2 +et0macaddr=00:13:10:07:EE:FC +boot_wait=on +watchdog=5000 +wl0_infra=1 +wl0_country_code=AU +et0mdcport=0 +pmon_ver=CFE 3.61.13.0 +wl0_ifname=eth1 +gpio5=robo_reset +vlan0ports=1 2 3 4 5* +wl0_mode=ap +wl0_ap_isolate=0 +os_flash_addr=bfc40000 +wl0_gmode=6 +sromrev=2 +boardtype=0x0708 +lan_netmask=255.255.255.0 +wl0_dtim=1 +wl0_ssid=OpenWrt +wl0_key1= +wl0id=0x4320 +wl0_key2= +wl0_key3= +wl0_key4= +ag0=255 +wl0_plcphdr=long +wl0_rate=0 +wl0_closed=0 +wl0_macmode=disabled +wl0_radioids=BCM2050 +wl0_phytype=g +wl0gpio2=0 +wl0_lazywds=0 +wl0gpio3=0 +boardflags2=0 +wl0_afterburner=auto +wl0_antdiv=-1 +wl0_wpa_psk= +wl0_unit=0 +wl_country_code=AU +pa0itssit=62 +wl0_wds= +cctl=0 +wl0_radius_port=1812 +wl0_auth=0 +wl0_radius_ipaddr= +pa0maxpwr=0x4e +clkfreq=216 +lan_ipaddr=192.168.1.1 +vlan1hwname=et0 +aa0=3 +wl0_phytypes=g +wl0_frag=2346 +wl0_wep=disabled +sdram_config=0x0062 +wl0_country= +vlan1ports=0 5 +scratch=a0180000 +eou_private_key=3979dac822dd40eb1739886261d8c48fc437335ed9b2d851aba651c25718c2fd3e1a4607373b1e3570d5d79adafab37767853749eee724bb7b60d4ed1dae316144c33b1e39547f25d4e9a7b13df509a902f60e76d0db8f5089020b274792b4c39895fa45c88dfe73d544de5d0fed9ac1610309756c6632d2811a6a255769b0c9 +ccode=0 +wl0_rateset=default +eou_device_id=F7QVRQQK +boardflags=0x0318 +sdram_refresh=0x0000 +sdram_ncdl=0xff0007 +wl0_rts=2347 +wl0_wpa_gtk_rekey=3600 +wl0_key=1 +et0phyaddr=30 +wl0_radio=1 +wl0_bcn=100 +wl0_hwaddr=00:13:10:07:EE:FE +wl0_gmode_protection=auto +pa0b0=0x15eb +wl0_maclist= +pa0b1=0xfa82 +pa0b2=0xfe66 +sdram_init=0x000b +vlan0hwname=et0 +dl_ram_addr=a0001000 +wl0_radius_key= +wl0_corerev=7 +wl0_channel=11 +wl0_auth_mode=open +boot_ver=v3.4 +wl0_crypto=tkip +boardnum=42 +eou_public_key=c36b1b0edcf0431f4ef6cfb4e647691c01887b75b0f9ac48e1357c618e8763c36cbfbae5556299e8e60a4374e8879562c65e88c82c45167d70493a5964e9db1942bc4b73b6d3571249294298a429ca8b199b8f48e2df35ceff68aec2dee787a18167ddc78876cd179f26f016ab1d7722c7d284a76e42e0ebb3fb32d984e10b2b11 diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v11/pci.txt b/openwrt/docs/hardware/linksys/wrt54gs_v11/pci.txt new file mode 100644 index 000000000..2be172663 --- /dev/null +++ b/openwrt/docs/hardware/linksys/wrt54gs_v11/pci.txt @@ -0,0 +1,37 @@ +PCI devices found: + Bus 0, device 0, function 0: + Class 0501: PCI device 14e4:0800 (rev 1). + IRQ 3. + Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. + Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff]. + Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff]. + Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff]. + Bus 0, device 1, function 0: + Class 0280: PCI device 14e4:4320 (rev 1). + IRQ 4. + Master Capable. Latency=64. + Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. + Bus 0, device 2, function 0: + Class 0200: PCI device 14e4:4713 (rev 1). + IRQ 5. + Master Capable. Latency=64. + Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. + Bus 0, device 3, function 0: + Class 0c03: PCI device 14e4:4717 (rev 1). + IRQ 6. + Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. + Bus 0, device 4, function 0: + Class 0c03: PCI device 14e4:4716 (rev 1). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. + Bus 0, device 5, function 0: + Class 0b30: PCI device 14e4:0816 (rev 1). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. + Bus 0, device 6, function 0: + Class 0500: PCI device 14e4:080f (rev 1). + IRQ 3. + Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. + Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. + Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. + Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff].