mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-08-21 16:53:41 +03:00
[adm5120] update to 2.6.22-rc6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7758 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
parent
3444eefb65
commit
8b2c7d0c93
@ -1,4 +1,4 @@
|
||||
#
|
||||
#
|
||||
# Copyright (C) 2006 OpenWrt.org
|
||||
#
|
||||
# This is free software, licensed under the GNU General Public License v2.
|
||||
@ -11,7 +11,7 @@ BOARD:=adm5120
|
||||
BOARDNAME:=ADM5120 (Little Endian)
|
||||
FEATURES:=squashfs jffs2 pci usb
|
||||
|
||||
LINUX_VERSION:=2.6.21.5
|
||||
LINUX_VERSION:=2.6.22-rc6
|
||||
|
||||
define Target/Description
|
||||
Build firmware images for Infineon/ADMtek ADM5120 based boards
|
||||
|
@ -5,6 +5,8 @@ CONFIG_ADM5120_HARDWARE_SWAB=y
|
||||
CONFIG_ADM5120_NR_UARTS=2
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
# CONFIG_ATM_DRIVERS is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
CONFIG_BAYCOM_SER_FDX=m
|
||||
CONFIG_BAYCOM_SER_HDX=m
|
||||
@ -46,6 +48,7 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
||||
# CONFIG_CPU_VR41XX is not set
|
||||
CONFIG_CRYPTO_SHA1=y
|
||||
# CONFIG_DDB5477 is not set
|
||||
CONFIG_DEVPORT=y
|
||||
# CONFIG_DM9000 is not set
|
||||
CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
@ -60,6 +63,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
|
||||
# CONFIG_GEN_RTC is not set
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HID=m
|
||||
@ -100,6 +104,7 @@ CONFIG_LEDS_ADM5120_DIAG=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
# CONFIG_MACH_ALCHEMY is not set
|
||||
# CONFIG_MACH_DECSTATION is not set
|
||||
# CONFIG_MACH_JAZZ is not set
|
||||
# CONFIG_MACH_VR41XX is not set
|
||||
@ -109,36 +114,20 @@ CONFIG_MIPS=y
|
||||
CONFIG_MIPS_ADM5120=y
|
||||
CONFIG_MIPS_ADM5120_ENET=y
|
||||
# CONFIG_MIPS_ATLAS is not set
|
||||
# CONFIG_MIPS_BOSPORUS is not set
|
||||
# CONFIG_MIPS_COBALT is not set
|
||||
# CONFIG_MIPS_DB1000 is not set
|
||||
# CONFIG_MIPS_DB1100 is not set
|
||||
# CONFIG_MIPS_DB1200 is not set
|
||||
# CONFIG_MIPS_DB1500 is not set
|
||||
# CONFIG_MIPS_DB1550 is not set
|
||||
# CONFIG_MIPS_EV64120 is not set
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
||||
# CONFIG_MIPS_MALTA is not set
|
||||
# CONFIG_MIPS_MIRAGE is not set
|
||||
# CONFIG_MIPS_MTX1 is not set
|
||||
CONFIG_MIPS_MT_DISABLED=y
|
||||
# CONFIG_MIPS_MT_SMP is not set
|
||||
# CONFIG_MIPS_MT_SMTC is not set
|
||||
# CONFIG_MIPS_PB1000 is not set
|
||||
# CONFIG_MIPS_PB1100 is not set
|
||||
# CONFIG_MIPS_PB1200 is not set
|
||||
# CONFIG_MIPS_PB1500 is not set
|
||||
# CONFIG_MIPS_PB1550 is not set
|
||||
# CONFIG_MIPS_SEAD is not set
|
||||
# CONFIG_MIPS_SIM is not set
|
||||
# CONFIG_MIPS_VPE_LOADER is not set
|
||||
# CONFIG_MIPS_XXS1500 is not set
|
||||
CONFIG_MODULE_FORCE_UNLOAD=y
|
||||
# CONFIG_MOMENCO_JAGUAR_ATX is not set
|
||||
# CONFIG_MOMENCO_OCELOT is not set
|
||||
# CONFIG_MOMENCO_OCELOT_3 is not set
|
||||
# CONFIG_MOMENCO_OCELOT_C is not set
|
||||
# CONFIG_MOMENCO_OCELOT_G is not set
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
CONFIG_MTD_ADM5120=y
|
||||
@ -179,10 +168,11 @@ CONFIG_MTD_NAND=y
|
||||
# CONFIG_MTD_NAND_DISKONCHIP is not set
|
||||
# CONFIG_MTD_NAND_ECC_SMC is not set
|
||||
CONFIG_MTD_NAND_IDS=y
|
||||
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
||||
# CONFIG_MTD_NAND_NANDSIM is not set
|
||||
# CONFIG_MTD_NAND_PLATFORM is not set
|
||||
CONFIG_MTD_NAND_RB100=y
|
||||
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
||||
# CONFIG_MTD_OBSOLETE_CHIPS is not set
|
||||
# CONFIG_MTD_ONENAND is not set
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
# CONFIG_MTD_PCI is not set
|
||||
@ -194,6 +184,7 @@ CONFIG_MTD_PARTITIONS=y
|
||||
# CONFIG_MTD_REDBOOT_PARTS is not set
|
||||
# CONFIG_MTD_ROM is not set
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
# CONFIG_NETDEV_1000 is not set
|
||||
CONFIG_NET_KEY=y
|
||||
# CONFIG_NET_PCI is not set
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
@ -214,6 +205,7 @@ CONFIG_PCI_ADM5120=y
|
||||
# CONFIG_RTC is not set
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
||||
CONFIG_SCSI_WAIT_SCAN=m
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
CONFIG_SERIAL_ADM5120=y
|
||||
CONFIG_SERIO=y
|
||||
@ -260,11 +252,7 @@ CONFIG_USB_EHCI_HCD=m
|
||||
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
|
||||
# CONFIG_USB_EHCI_SPLIT_ISO is not set
|
||||
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
|
||||
# CONFIG_USB_ET61X251 is not set
|
||||
# CONFIG_USB_GTCO is not set
|
||||
# CONFIG_USB_IBMCAM is not set
|
||||
# CONFIG_USB_KAWETH is not set
|
||||
# CONFIG_USB_KONICAWC is not set
|
||||
# CONFIG_USB_NET_DM9601 is not set
|
||||
# CONFIG_USB_NET_GL620A is not set
|
||||
# CONFIG_USB_NET_MCS7830 is not set
|
||||
@ -273,22 +261,12 @@ CONFIG_USB_EHCI_HCD=m
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
||||
CONFIG_USB_OHCI_HCD=m
|
||||
# CONFIG_USB_OV511 is not set
|
||||
# CONFIG_USB_PEGASUS is not set
|
||||
# CONFIG_USB_PWC is not set
|
||||
# CONFIG_USB_QUICKCAM_MESSENGER is not set
|
||||
# CONFIG_USB_RTL8150 is not set
|
||||
# CONFIG_USB_SE401 is not set
|
||||
# CONFIG_USB_SERIAL is not set
|
||||
# CONFIG_USB_SN9C102 is not set
|
||||
# CONFIG_USB_STV680 is not set
|
||||
# CONFIG_USB_UHCI_HCD is not set
|
||||
# CONFIG_USB_VICAM is not set
|
||||
# CONFIG_USB_ZC0301 is not set
|
||||
# CONFIG_USB_ZD1201 is not set
|
||||
# CONFIG_VIDEO_CPIA is not set
|
||||
CONFIG_VIDEO_CPIA2=m
|
||||
# CONFIG_VIDEO_STRADIS is not set
|
||||
# CONFIG_VGASTATE is not set
|
||||
CONFIG_VIDEO_V4L1=y
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_YAFFS_9BYTE_TAGS=y
|
||||
@ -302,3 +280,4 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
||||
CONFIG_YAFFS_YAFFS1=y
|
||||
CONFIG_YAFFS_YAFFS2=y
|
||||
# CONFIG_ZD1211RW is not set
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
||||
|
@ -91,7 +91,8 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
||||
|
||||
irq = -1;
|
||||
if (slot < 1 || slot > 3) {
|
||||
printk("PCI: slot number %u is not supported\n", slot);
|
||||
printk(KERN_ALERT "PCI: slot number %u is not supported\n",
|
||||
slot);
|
||||
goto out;
|
||||
}
|
||||
|
||||
@ -124,8 +125,8 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
||||
case MACH_ADM5120_WPP54AG:
|
||||
case MACH_ADM5120_WPP54G:
|
||||
default:
|
||||
printk("PCI: irq map is unknown for %s, using defaults.\n",
|
||||
adm5120_board_name());
|
||||
printk(KERN_ALERT "PCI: irq map is unknown for %s, using "
|
||||
"defaults.\n", adm5120_board_name());
|
||||
break;
|
||||
}
|
||||
|
||||
@ -138,7 +139,7 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
||||
}
|
||||
|
||||
if (irq < 0) {
|
||||
printk(KERN_INFO "PCI: no irq found for %s pin:%u\n",
|
||||
printk(KERN_ALERT "PCI: no irq found for %s pin:%u\n",
|
||||
pci_name(dev), pin);
|
||||
} else {
|
||||
printk(KERN_INFO "PCI: mapping irq for %s pin:%u, irq:%d\n",
|
||||
|
@ -1,11 +1,11 @@
|
||||
Index: linux-2.6.21.1/arch/mips/Kconfig
|
||||
Index: linux-2.6.22-rc6/arch/mips/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/arch/mips/Kconfig
|
||||
+++ linux-2.6.21.1/arch/mips/Kconfig
|
||||
@@ -16,6 +16,17 @@ choice
|
||||
--- linux-2.6.22-rc6.orig/arch/mips/Kconfig
|
||||
+++ linux-2.6.22-rc6/arch/mips/Kconfig
|
||||
@@ -15,6 +15,17 @@ choice
|
||||
prompt "System type"
|
||||
default SGI_IP22
|
||||
|
||||
|
||||
+config MIPS_ADM5120
|
||||
+ bool "Support for ADM5120 SoC"
|
||||
+ select SYS_HAS_CPU_MIPS32_R1
|
||||
@ -17,24 +17,24 @@ Index: linux-2.6.21.1/arch/mips/Kconfig
|
||||
+ select SYS_SUPPORTS_32BIT_KERNEL
|
||||
+ select GENERIC_GPIO
|
||||
+
|
||||
config MIPS_MTX1
|
||||
bool "4G Systems MTX-1 board"
|
||||
select DMA_NONCOHERENT
|
||||
@@ -766,6 +775,7 @@
|
||||
|
||||
config MACH_ALCHEMY
|
||||
bool "Alchemy processor based machines"
|
||||
|
||||
@@ -658,6 +669,7 @@ config TOSHIBA_RBTX4938
|
||||
|
||||
endchoice
|
||||
|
||||
|
||||
+source "arch/mips/adm5120/Kconfig"
|
||||
source "arch/mips/au1000/Kconfig"
|
||||
source "arch/mips/ddb5xxx/Kconfig"
|
||||
source "arch/mips/gt64120/ev64120/Kconfig"
|
||||
source "arch/mips/jazz/Kconfig"
|
||||
Index: linux-2.6.21.1/arch/mips/Makefile
|
||||
Index: linux-2.6.22-rc6/arch/mips/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/arch/mips/Makefile
|
||||
+++ linux-2.6.21.1/arch/mips/Makefile
|
||||
--- linux-2.6.22-rc6.orig/arch/mips/Makefile
|
||||
+++ linux-2.6.22-rc6/arch/mips/Makefile
|
||||
@@ -165,6 +165,14 @@ cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/
|
||||
load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
|
||||
|
||||
|
||||
#
|
||||
+# ADMtek 5120
|
||||
+#
|
||||
@ -47,18 +47,18 @@ Index: linux-2.6.21.1/arch/mips/Makefile
|
||||
# Common Alchemy Au1x00 stuff
|
||||
#
|
||||
core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
|
||||
Index: linux-2.6.21.1/include/asm-mips/bootinfo.h
|
||||
Index: linux-2.6.22-rc6/include/asm-mips/bootinfo.h
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/include/asm-mips/bootinfo.h
|
||||
+++ linux-2.6.21.1/include/asm-mips/bootinfo.h
|
||||
--- linux-2.6.22-rc6.orig/include/asm-mips/bootinfo.h
|
||||
+++ linux-2.6.22-rc6/include/asm-mips/bootinfo.h
|
||||
@@ -213,6 +213,57 @@
|
||||
#define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */
|
||||
#define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
|
||||
|
||||
|
||||
+/*
|
||||
+ * Valid machtype for group ADMtek ADM5120
|
||||
+ */
|
||||
+#define MACH_GROUP_ADM5120 23
|
||||
+#define MACH_GROUP_ADM5120 26
|
||||
+#define MACH_ADM5120_UNKNOWN 0 /* Unknown board */
|
||||
+#define MACH_ADM5120_WP54G_WRT 1 /* Compex WP54G-WRT */
|
||||
+#define MACH_ADM5120_WP54G 2 /* Compex WP54G */
|
||||
@ -107,5 +107,5 @@ Index: linux-2.6.21.1/include/asm-mips/bootinfo.h
|
||||
+#define MACH_ADM5120_BR6104K 47 /* Edimax BR-6104K */
|
||||
+
|
||||
#define CL_SIZE COMMAND_LINE_SIZE
|
||||
|
||||
|
||||
const char *get_system_type(void);
|
||||
|
@ -1,8 +1,8 @@
|
||||
Index: linux-2.6.21.1/drivers/mtd/maps/Kconfig
|
||||
Index: linux-2.6.22-rc6/drivers/mtd/maps/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/drivers/mtd/maps/Kconfig
|
||||
+++ linux-2.6.21.1/drivers/mtd/maps/Kconfig
|
||||
@@ -605,5 +605,10 @@ config MTD_PLATRAM
|
||||
--- linux-2.6.22-rc6.orig/drivers/mtd/maps/Kconfig
|
||||
+++ linux-2.6.22-rc6/drivers/mtd/maps/Kconfig
|
||||
@@ -620,5 +620,10 @@ config MTD_PLATRAM
|
||||
|
||||
This selection automatically selects the map_ram driver.
|
||||
|
||||
@ -13,11 +13,11 @@ Index: linux-2.6.21.1/drivers/mtd/maps/Kconfig
|
||||
+
|
||||
endmenu
|
||||
|
||||
Index: linux-2.6.21.1/drivers/mtd/maps/Makefile
|
||||
Index: linux-2.6.22-rc6/drivers/mtd/maps/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/drivers/mtd/maps/Makefile
|
||||
+++ linux-2.6.21.1/drivers/mtd/maps/Makefile
|
||||
@@ -45,6 +45,7 @@ obj-$(CONFIG_MTD_OCELOT) += ocelot.o
|
||||
--- linux-2.6.22-rc6.orig/drivers/mtd/maps/Makefile
|
||||
+++ linux-2.6.22-rc6/drivers/mtd/maps/Makefile
|
||||
@@ -47,6 +47,7 @@ obj-$(CONFIG_MTD_OCELOT) += ocelot.o
|
||||
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
|
||||
obj-$(CONFIG_MTD_PCI) += pci.o
|
||||
obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
|
||||
|
@ -1,7 +1,7 @@
|
||||
Index: linux-2.6.21.1/drivers/net/Kconfig
|
||||
Index: linux-2.6.22-rc6/drivers/net/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/drivers/net/Kconfig
|
||||
+++ linux-2.6.21.1/drivers/net/Kconfig
|
||||
--- linux-2.6.22-rc6.orig/drivers/net/Kconfig
|
||||
+++ linux-2.6.22-rc6/drivers/net/Kconfig
|
||||
@@ -574,6 +574,10 @@ config MIPS_AU1X00_ENET
|
||||
If you have an Alchemy Semi AU1X00 based system
|
||||
say Y. Otherwise, say N.
|
||||
@ -13,10 +13,10 @@ Index: linux-2.6.21.1/drivers/net/Kconfig
|
||||
config NET_SB1250_MAC
|
||||
tristate "SB1250 Ethernet support"
|
||||
depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
|
||||
Index: linux-2.6.21.1/drivers/net/Makefile
|
||||
Index: linux-2.6.22-rc6/drivers/net/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/drivers/net/Makefile
|
||||
+++ linux-2.6.21.1/drivers/net/Makefile
|
||||
--- linux-2.6.22-rc6.orig/drivers/net/Makefile
|
||||
+++ linux-2.6.22-rc6/drivers/net/Makefile
|
||||
@@ -165,6 +165,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
|
||||
# This is also a 82596 and should probably be merged
|
||||
obj-$(CONFIG_LP486E) += lp486e.o
|
||||
|
@ -1,7 +1,7 @@
|
||||
Index: linux-2.6.21.1/drivers/serial/Makefile
|
||||
Index: linux-2.6.22-rc6/drivers/serial/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/drivers/serial/Makefile
|
||||
+++ linux-2.6.21.1/drivers/serial/Makefile
|
||||
--- linux-2.6.22-rc6.orig/drivers/serial/Makefile
|
||||
+++ linux-2.6.22-rc6/drivers/serial/Makefile
|
||||
@@ -21,6 +21,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554)
|
||||
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
|
||||
obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
|
||||
@ -10,25 +10,25 @@ Index: linux-2.6.21.1/drivers/serial/Makefile
|
||||
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
|
||||
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
|
||||
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
|
||||
Index: linux-2.6.21.1/include/linux/serial_core.h
|
||||
Index: linux-2.6.22-rc6/include/linux/serial_core.h
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/include/linux/serial_core.h
|
||||
+++ linux-2.6.21.1/include/linux/serial_core.h
|
||||
@@ -135,6 +135,9 @@
|
||||
/* Xilinx uartlite */
|
||||
#define PORT_UARTLITE 74
|
||||
--- linux-2.6.22-rc6.orig/include/linux/serial_core.h
|
||||
+++ linux-2.6.22-rc6/include/linux/serial_core.h
|
||||
@@ -143,6 +143,9 @@
|
||||
#define PORT_KS8695 76
|
||||
|
||||
|
||||
+/* ADMtek ADM5120 SoC */
|
||||
+#define PORT_ADM5120 68
|
||||
+#define PORT_ADM5120 77
|
||||
+
|
||||
#ifdef __KERNEL__
|
||||
|
||||
#include <linux/compiler.h>
|
||||
Index: linux-2.6.21.1/drivers/serial/Kconfig
|
||||
Index: linux-2.6.22-rc6/drivers/serial/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/drivers/serial/Kconfig
|
||||
+++ linux-2.6.21.1/drivers/serial/Kconfig
|
||||
@@ -256,6 +256,22 @@ config SERIAL_8250_AU1X00
|
||||
--- linux-2.6.22-rc6.orig/drivers/serial/Kconfig
|
||||
+++ linux-2.6.22-rc6/drivers/serial/Kconfig
|
||||
@@ -270,6 +270,22 @@ config SERIAL_8250_RM9K
|
||||
|
||||
comment "Non-8250 serial port support"
|
||||
|
||||
|
@ -1,20 +1,191 @@
|
||||
Index: linux-2.6.21.1/drivers/usb/core/hub.c
|
||||
Index: linux-2.6.22-rc6/drivers/usb/core/hub.c
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/drivers/usb/core/hub.c
|
||||
+++ linux-2.6.21.1/drivers/usb/core/hub.c
|
||||
@@ -2227,6 +2227,8 @@ hub_port_init (struct usb_hub *hub, stru
|
||||
--- linux-2.6.22-rc6.orig/drivers/usb/core/hub.c
|
||||
+++ linux-2.6.22-rc6/drivers/usb/core/hub.c
|
||||
@@ -464,7 +464,7 @@ void usb_hub_tt_clear_buffer (struct usb
|
||||
: (USB_ENDPOINT_XFER_BULK << 11);
|
||||
if (usb_pipein (pipe))
|
||||
clear->devinfo |= 1 << 15;
|
||||
-
|
||||
+
|
||||
/* tell keventd to clear state for this TT */
|
||||
spin_lock_irqsave (&tt->lock, flags);
|
||||
list_add_tail (&clear->clear_list, &tt->clear_list);
|
||||
@@ -540,7 +540,7 @@ static int hub_hub_status(struct usb_hub
|
||||
"%s failed (err = %d)\n", __FUNCTION__, ret);
|
||||
else {
|
||||
*status = le16_to_cpu(hub->status->hub.wHubStatus);
|
||||
- *change = le16_to_cpu(hub->status->hub.wHubChange);
|
||||
+ *change = le16_to_cpu(hub->status->hub.wHubChange);
|
||||
ret = 0;
|
||||
}
|
||||
mutex_unlock(&hub->status_mutex);
|
||||
@@ -1424,7 +1424,7 @@ static int hub_port_status(struct usb_hu
|
||||
ret = -EIO;
|
||||
} else {
|
||||
*status = le16_to_cpu(hub->status->port.wPortStatus);
|
||||
- *change = le16_to_cpu(hub->status->port.wPortChange);
|
||||
+ *change = le16_to_cpu(hub->status->port.wPortChange);
|
||||
ret = 0;
|
||||
}
|
||||
mutex_unlock(&hub->status_mutex);
|
||||
@@ -2007,7 +2007,7 @@ static inline int remote_wakeup(struct u
|
||||
* Between connect detection and reset signaling there must be a delay
|
||||
* of 100ms at least for debounce and power-settling. The corresponding
|
||||
* timer shall restart whenever the downstream port detects a disconnect.
|
||||
- *
|
||||
+ *
|
||||
* Apparently there are some bluetooth and irda-dongles and a number of
|
||||
* low-speed devices for which this debounce period may last over a second.
|
||||
* Not covered by the spec - but easy to deal with.
|
||||
@@ -2142,7 +2142,7 @@ hub_port_init (struct usb_hub *hub, stru
|
||||
goto fail;
|
||||
}
|
||||
oldspeed = udev->speed;
|
||||
-
|
||||
+
|
||||
/* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
|
||||
* it's fixed size except for full speed devices.
|
||||
* For Wireless USB devices, ep0 max packet is always 512 (tho
|
||||
@@ -2168,7 +2168,7 @@ hub_port_init (struct usb_hub *hub, stru
|
||||
default:
|
||||
goto fail;
|
||||
}
|
||||
-
|
||||
+
|
||||
type = "";
|
||||
switch (udev->speed) {
|
||||
case USB_SPEED_LOW: speed = "low"; break;
|
||||
@@ -2194,7 +2194,7 @@ hub_port_init (struct usb_hub *hub, stru
|
||||
udev->tt = &hub->tt;
|
||||
udev->ttport = port1;
|
||||
}
|
||||
-
|
||||
+
|
||||
/* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way?
|
||||
* Because device hardware and firmware is sometimes buggy in
|
||||
* this area, and this is how Linux has done it for ages.
|
||||
@@ -2230,6 +2230,8 @@ hub_port_init (struct usb_hub *hub, stru
|
||||
USB_DT_DEVICE << 8, 0,
|
||||
buf, GET_DESCRIPTOR_BUFSIZE,
|
||||
(i ? USB_CTRL_GET_TIMEOUT : 1000));
|
||||
USB_CTRL_GET_TIMEOUT);
|
||||
+printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0,
|
||||
+buf->bDescriptorType, USB_DT_DEVICE);
|
||||
switch (buf->bMaxPacketSize0) {
|
||||
case 8: case 16: case 32: case 64: case 255:
|
||||
if (buf->bDescriptorType ==
|
||||
Index: linux-2.6.21.1/drivers/usb/host/Kconfig
|
||||
@@ -2281,7 +2283,7 @@ hub_port_init (struct usb_hub *hub, stru
|
||||
udev->devnum, retval);
|
||||
goto fail;
|
||||
}
|
||||
-
|
||||
+
|
||||
/* cope with hardware quirkiness:
|
||||
* - let SET_ADDRESS settle, some device hardware wants it
|
||||
* - read ep0 maxpacket even for high and low speed,
|
||||
@@ -2318,7 +2320,7 @@ hub_port_init (struct usb_hub *hub, stru
|
||||
udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
|
||||
ep0_reinit(udev);
|
||||
}
|
||||
-
|
||||
+
|
||||
retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
|
||||
if (retval < (signed)sizeof(udev->descriptor)) {
|
||||
dev_err(&udev->dev, "device descriptor read/%s, error %d\n",
|
||||
@@ -2416,7 +2418,7 @@ static void hub_port_connect_change(stru
|
||||
struct device *hub_dev = hub->intfdev;
|
||||
u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
|
||||
int status, i;
|
||||
-
|
||||
+
|
||||
dev_dbg (hub_dev,
|
||||
"port %d, status %04x, change %04x, %s\n",
|
||||
port1, portstatus, portchange, portspeed (portstatus));
|
||||
@@ -2425,7 +2427,7 @@ static void hub_port_connect_change(stru
|
||||
set_port_led(hub, port1, HUB_LED_AUTO);
|
||||
hub->indicator[port1-1] = INDICATOR_AUTO;
|
||||
}
|
||||
-
|
||||
+
|
||||
/* Disconnect any existing devices under this port */
|
||||
if (hdev->children[port1-1])
|
||||
usb_disconnect(&hdev->children[port1-1]);
|
||||
@@ -2455,7 +2457,7 @@ static void hub_port_connect_change(stru
|
||||
if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
|
||||
&& !(portstatus & (1 << USB_PORT_FEAT_POWER)))
|
||||
set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
|
||||
-
|
||||
+
|
||||
if (portstatus & USB_PORT_STAT_ENABLE)
|
||||
goto done;
|
||||
return;
|
||||
@@ -2535,7 +2537,7 @@ static void hub_port_connect_change(stru
|
||||
goto loop_disable;
|
||||
}
|
||||
}
|
||||
-
|
||||
+
|
||||
/* check for devices running slower than they could */
|
||||
if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
|
||||
&& udev->speed == USB_SPEED_FULL
|
||||
@@ -2587,7 +2589,7 @@ loop:
|
||||
if (status == -ENOTCONN)
|
||||
break;
|
||||
}
|
||||
-
|
||||
+
|
||||
done:
|
||||
hub_port_disable(hub, port1, 1);
|
||||
}
|
||||
@@ -2720,7 +2722,7 @@ static void hub_events(void)
|
||||
* EM interference sometimes causes badly
|
||||
* shielded USB devices to be shutdown by
|
||||
* the hub, this hack enables them again.
|
||||
- * Works at least with mouse driver.
|
||||
+ * Works at least with mouse driver.
|
||||
*/
|
||||
if (!(portstatus & USB_PORT_STAT_ENABLE)
|
||||
&& !connect_change
|
||||
@@ -2750,7 +2752,7 @@ static void hub_events(void)
|
||||
"resume on port %d, status %d\n",
|
||||
i, ret);
|
||||
}
|
||||
-
|
||||
+
|
||||
if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
|
||||
dev_err (hub_dev,
|
||||
"over-current change on port %d\n",
|
||||
@@ -2985,7 +2987,7 @@ int usb_reset_device(struct usb_device *
|
||||
|
||||
if (ret < 0)
|
||||
goto re_enumerate;
|
||||
-
|
||||
+
|
||||
/* Device might have changed firmware (DFU or similar) */
|
||||
if (memcmp(&udev->descriptor, &descriptor, sizeof descriptor)
|
||||
|| config_descriptors_changed (udev)) {
|
||||
@@ -2993,7 +2995,7 @@ int usb_reset_device(struct usb_device *
|
||||
udev->descriptor = descriptor; /* for disconnect() calls */
|
||||
goto re_enumerate;
|
||||
}
|
||||
-
|
||||
+
|
||||
if (!udev->actconfig)
|
||||
goto done;
|
||||
|
||||
@@ -3031,7 +3033,7 @@ int usb_reset_device(struct usb_device *
|
||||
|
||||
done:
|
||||
return 0;
|
||||
-
|
||||
+
|
||||
re_enumerate:
|
||||
hub_port_logical_disconnect(parent_hub, port1);
|
||||
return -ENODEV;
|
||||
Index: linux-2.6.22-rc6/drivers/usb/host/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/drivers/usb/host/Kconfig
|
||||
+++ linux-2.6.21.1/drivers/usb/host/Kconfig
|
||||
--- linux-2.6.22-rc6.orig/drivers/usb/host/Kconfig
|
||||
+++ linux-2.6.22-rc6/drivers/usb/host/Kconfig
|
||||
@@ -224,3 +224,6 @@ config USB_SL811_CS
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called "sl811_cs".
|
||||
@ -22,35 +193,38 @@ Index: linux-2.6.21.1/drivers/usb/host/Kconfig
|
||||
+config USB_ADM5120_HCD
|
||||
+ tristate "ADM5120 HCD support"
|
||||
+ depends on USB && MIPS_ADM5120
|
||||
Index: linux-2.6.21.1/drivers/usb/host/Makefile
|
||||
Index: linux-2.6.22-rc6/drivers/usb/host/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/drivers/usb/host/Makefile
|
||||
+++ linux-2.6.21.1/drivers/usb/host/Makefile
|
||||
@@ -16,3 +16,4 @@ obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd
|
||||
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
|
||||
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
|
||||
obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o
|
||||
+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
|
||||
Index: linux-2.6.21.1/drivers/usb/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/drivers/usb/Kconfig
|
||||
+++ linux-2.6.21.1/drivers/usb/Kconfig
|
||||
@@ -91,8 +91,6 @@ source "drivers/usb/image/Kconfig"
|
||||
--- linux-2.6.22-rc6.orig/drivers/usb/host/Makefile
|
||||
+++ linux-2.6.22-rc6/drivers/usb/host/Makefile
|
||||
@@ -8,6 +8,7 @@ endif
|
||||
|
||||
source "drivers/usb/net/Kconfig"
|
||||
obj-$(CONFIG_PCI) += pci-quirks.o
|
||||
|
||||
+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
|
||||
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
|
||||
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
|
||||
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
|
||||
Index: linux-2.6.22-rc6/drivers/usb/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.22-rc6.orig/drivers/usb/Kconfig
|
||||
+++ linux-2.6.22-rc6/drivers/usb/Kconfig
|
||||
@@ -88,8 +88,6 @@ source "drivers/usb/storage/Kconfig"
|
||||
|
||||
source "drivers/usb/image/Kconfig"
|
||||
|
||||
-source "drivers/usb/mon/Kconfig"
|
||||
-
|
||||
comment "USB port drivers"
|
||||
depends on USB
|
||||
|
||||
Index: linux-2.6.21.1/drivers/usb/Makefile
|
||||
Index: linux-2.6.22-rc6/drivers/usb/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/drivers/usb/Makefile
|
||||
+++ linux-2.6.21.1/drivers/usb/Makefile
|
||||
@@ -17,6 +17,7 @@ obj-$(CONFIG_USB_SL811_HCD) += host/
|
||||
--- linux-2.6.22-rc6.orig/drivers/usb/Makefile
|
||||
+++ linux-2.6.22-rc6/drivers/usb/Makefile
|
||||
@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD) += host/
|
||||
obj-$(CONFIG_USB_SL811_HCD) += host/
|
||||
obj-$(CONFIG_USB_U132_HCD) += host/
|
||||
obj-$(CONFIG_ETRAX_USB_HOST) += host/
|
||||
obj-$(CONFIG_USB_OHCI_AT91) += host/
|
||||
+obj-$(CONFIG_USB_ADM5120_HCD) += host/
|
||||
|
||||
|
@ -1,8 +1,8 @@
|
||||
Index: linux-2.6.21.1/drivers/leds/Kconfig
|
||||
Index: linux-2.6.22-rc6/drivers/leds/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/drivers/leds/Kconfig
|
||||
+++ linux-2.6.21.1/drivers/leds/Kconfig
|
||||
@@ -19,6 +19,27 @@ config LEDS_CLASS
|
||||
--- linux-2.6.22-rc6.orig/drivers/leds/Kconfig
|
||||
+++ linux-2.6.22-rc6/drivers/leds/Kconfig
|
||||
@@ -20,6 +20,27 @@ config LEDS_CLASS
|
||||
|
||||
comment "LED drivers"
|
||||
|
||||
@ -30,10 +30,10 @@ Index: linux-2.6.21.1/drivers/leds/Kconfig
|
||||
config LEDS_CORGI
|
||||
tristate "LED Support for the Sharp SL-C7x0 series"
|
||||
depends on LEDS_CLASS && PXA_SHARP_C7xx
|
||||
Index: linux-2.6.21.1/drivers/leds/Makefile
|
||||
Index: linux-2.6.22-rc6/drivers/leds/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/drivers/leds/Makefile
|
||||
+++ linux-2.6.21.1/drivers/leds/Makefile
|
||||
--- linux-2.6.22-rc6.orig/drivers/leds/Makefile
|
||||
+++ linux-2.6.22-rc6/drivers/leds/Makefile
|
||||
@@ -5,6 +5,8 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o
|
||||
obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
|
||||
|
||||
|
@ -1,17 +1,17 @@
|
||||
Index: linux-2.6.21.1/arch/mips/pci/Makefile
|
||||
Index: linux-2.6.22-rc6/arch/mips/pci/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/arch/mips/pci/Makefile
|
||||
+++ linux-2.6.21.1/arch/mips/pci/Makefile
|
||||
@@ -53,3 +53,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-
|
||||
--- linux-2.6.22-rc6.orig/arch/mips/pci/Makefile
|
||||
+++ linux-2.6.22-rc6/arch/mips/pci/Makefile
|
||||
@@ -50,3 +50,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-
|
||||
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
|
||||
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
|
||||
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
|
||||
+obj-$(CONFIG_PCI_ADM5120) += fixup-adm5120.o ops-adm5120.o pci-adm5120.o
|
||||
Index: linux-2.6.21.1/include/linux/pci_ids.h
|
||||
Index: linux-2.6.22-rc6/include/linux/pci_ids.h
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/include/linux/pci_ids.h
|
||||
+++ linux-2.6.21.1/include/linux/pci_ids.h
|
||||
@@ -1701,6 +1701,9 @@
|
||||
--- linux-2.6.22-rc6.orig/include/linux/pci_ids.h
|
||||
+++ linux-2.6.22-rc6/include/linux/pci_ids.h
|
||||
@@ -1712,6 +1712,9 @@
|
||||
#define PCI_VENDOR_ID_ESDGMBH 0x12fe
|
||||
#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
|
||||
|
||||
|
@ -1,6 +1,8 @@
|
||||
--- linux-2.6.19.2/include/asm-mips/byteorder.h 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2.new/include/asm-mips/byteorder.h 2007-05-16 21:14:47.000000000 +0200
|
||||
@@ -58,6 +58,35 @@
|
||||
Index: linux-2.6.22-rc6/include/asm-mips/byteorder.h
|
||||
===================================================================
|
||||
--- linux-2.6.22-rc6.orig/include/asm-mips/byteorder.h
|
||||
+++ linux-2.6.22-rc6/include/asm-mips/byteorder.h
|
||||
@@ -58,6 +58,35 @@ static __inline__ __attribute_const__ __
|
||||
|
||||
#endif /* CONFIG_CPU_MIPSR2 */
|
||||
|
||||
|
@ -1,8 +1,8 @@
|
||||
Index: linux-2.6.21.1/drivers/mtd/Kconfig
|
||||
Index: linux-2.6.22-rc6/drivers/mtd/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/drivers/mtd/Kconfig
|
||||
+++ linux-2.6.21.1/drivers/mtd/Kconfig
|
||||
@@ -157,6 +157,22 @@ config MTD_AFS_PARTS
|
||||
--- linux-2.6.22-rc6.orig/drivers/mtd/Kconfig
|
||||
+++ linux-2.6.22-rc6/drivers/mtd/Kconfig
|
||||
@@ -155,6 +155,22 @@ config MTD_AFS_PARTS
|
||||
for your particular device. It won't happen automatically. The
|
||||
'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
|
||||
|
||||
@ -23,13 +23,13 @@ Index: linux-2.6.21.1/drivers/mtd/Kconfig
|
||||
+ for your particular device. It won't happen automatically.
|
||||
+
|
||||
comment "User Modules And Translation Layers"
|
||||
depends on MTD
|
||||
|
||||
Index: linux-2.6.21.1/drivers/mtd/Makefile
|
||||
config MTD_CHAR
|
||||
Index: linux-2.6.22-rc6/drivers/mtd/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/drivers/mtd/Makefile
|
||||
+++ linux-2.6.21.1/drivers/mtd/Makefile
|
||||
@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
|
||||
--- linux-2.6.22-rc6.orig/drivers/mtd/Makefile
|
||||
+++ linux-2.6.22-rc6/drivers/mtd/Makefile
|
||||
@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
|
||||
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
|
||||
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
|
||||
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
|
||||
|
@ -1,7 +1,7 @@
|
||||
Index: linux-2.6.21.1/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
Index: linux-2.6.22-rc6/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
+++ linux-2.6.21.1/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
--- linux-2.6.22-rc6.orig/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
+++ linux-2.6.22-rc6/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
@@ -47,12 +47,17 @@
|
||||
#define MANUFACTURER_AMD 0x0001
|
||||
#define MANUFACTURER_ATMEL 0x001F
|
||||
@ -66,11 +66,11 @@ Index: linux-2.6.21.1/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
{ 0, 0, NULL, NULL }
|
||||
};
|
||||
static struct cfi_fixup jedec_fixup_table[] = {
|
||||
Index: linux-2.6.21.1/drivers/mtd/chips/Kconfig
|
||||
Index: linux-2.6.22-rc6/drivers/mtd/chips/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/drivers/mtd/chips/Kconfig
|
||||
+++ linux-2.6.21.1/drivers/mtd/chips/Kconfig
|
||||
@@ -199,6 +199,14 @@ config MTD_CFI_AMDSTD
|
||||
--- linux-2.6.22-rc6.orig/drivers/mtd/chips/Kconfig
|
||||
+++ linux-2.6.22-rc6/drivers/mtd/chips/Kconfig
|
||||
@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
|
||||
provides support for one of those command sets, used on chips
|
||||
including the AMD Am29LV320.
|
||||
|
||||
|
@ -1,7 +1,7 @@
|
||||
Index: linux-2.6.21.1/arch/mips/kernel/head.S
|
||||
Index: linux-2.6.22-rc6/arch/mips/kernel/head.S
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/arch/mips/kernel/head.S
|
||||
+++ linux-2.6.21.1/arch/mips/kernel/head.S
|
||||
--- linux-2.6.22-rc6.orig/arch/mips/kernel/head.S
|
||||
+++ linux-2.6.22-rc6/arch/mips/kernel/head.S
|
||||
@@ -129,14 +129,19 @@
|
||||
#endif
|
||||
.endm
|
||||
|
@ -1,8 +1,8 @@
|
||||
Index: linux-2.6.21.1/drivers/mtd/nand/Kconfig
|
||||
Index: linux-2.6.22-rc6/drivers/mtd/nand/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/drivers/mtd/nand/Kconfig
|
||||
+++ linux-2.6.21.1/drivers/mtd/nand/Kconfig
|
||||
@@ -75,6 +75,12 @@ config MTD_NAND_TS7250
|
||||
--- linux-2.6.22-rc6.orig/drivers/mtd/nand/Kconfig
|
||||
+++ linux-2.6.22-rc6/drivers/mtd/nand/Kconfig
|
||||
@@ -81,6 +81,12 @@ config MTD_NAND_TS7250
|
||||
help
|
||||
Support for NAND flash on Technologic Systems TS-7250 platform.
|
||||
|
||||
@ -15,10 +15,10 @@ Index: linux-2.6.21.1/drivers/mtd/nand/Kconfig
|
||||
config MTD_NAND_IDS
|
||||
tristate
|
||||
|
||||
Index: linux-2.6.21.1/drivers/mtd/nand/Makefile
|
||||
Index: linux-2.6.22-rc6/drivers/mtd/nand/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.21.1.orig/drivers/mtd/nand/Makefile
|
||||
+++ linux-2.6.21.1/drivers/mtd/nand/Makefile
|
||||
--- linux-2.6.22-rc6.orig/drivers/mtd/nand/Makefile
|
||||
+++ linux-2.6.22-rc6/drivers/mtd/nand/Makefile
|
||||
@@ -10,6 +10,7 @@ obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nan
|
||||
obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
|
||||
obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
|
||||
|
@ -11,7 +11,7 @@ BOARD:=adm5120eb
|
||||
BOARDNAME:=ADM5120 (Big Endian)
|
||||
FEATURES:=squashfs pci usb
|
||||
|
||||
LINUX_VERSION:=2.6.21.5
|
||||
LINUX_VERSION:=2.6.22-rc6
|
||||
|
||||
define Target/Description
|
||||
Build firmware images for Infineon/ADMTek ADM5120 based boards running in big-endian mode
|
||||
|
@ -5,6 +5,8 @@ CONFIG_ADM5120_HARDWARE_SWAB=y
|
||||
CONFIG_ADM5120_NR_UARTS=2
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
# CONFIG_ATM_DRIVERS is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
CONFIG_BAYCOM_SER_FDX=m
|
||||
CONFIG_BAYCOM_SER_HDX=m
|
||||
@ -46,6 +48,7 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
||||
# CONFIG_CPU_VR41XX is not set
|
||||
CONFIG_CRYPTO_SHA1=y
|
||||
# CONFIG_DDB5477 is not set
|
||||
CONFIG_DEVPORT=y
|
||||
# CONFIG_DM9000 is not set
|
||||
CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
@ -60,6 +63,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
|
||||
# CONFIG_GEN_RTC is not set
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HID=m
|
||||
@ -100,6 +104,7 @@ CONFIG_LEDS_ADM5120_DIAG=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
# CONFIG_MACH_ALCHEMY is not set
|
||||
# CONFIG_MACH_DECSTATION is not set
|
||||
# CONFIG_MACH_JAZZ is not set
|
||||
# CONFIG_MACH_VR41XX is not set
|
||||
@ -109,36 +114,20 @@ CONFIG_MIPS=y
|
||||
CONFIG_MIPS_ADM5120=y
|
||||
CONFIG_MIPS_ADM5120_ENET=y
|
||||
# CONFIG_MIPS_ATLAS is not set
|
||||
# CONFIG_MIPS_BOSPORUS is not set
|
||||
# CONFIG_MIPS_COBALT is not set
|
||||
# CONFIG_MIPS_DB1000 is not set
|
||||
# CONFIG_MIPS_DB1100 is not set
|
||||
# CONFIG_MIPS_DB1200 is not set
|
||||
# CONFIG_MIPS_DB1500 is not set
|
||||
# CONFIG_MIPS_DB1550 is not set
|
||||
# CONFIG_MIPS_EV64120 is not set
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
||||
# CONFIG_MIPS_MALTA is not set
|
||||
# CONFIG_MIPS_MIRAGE is not set
|
||||
# CONFIG_MIPS_MTX1 is not set
|
||||
CONFIG_MIPS_MT_DISABLED=y
|
||||
# CONFIG_MIPS_MT_SMP is not set
|
||||
# CONFIG_MIPS_MT_SMTC is not set
|
||||
# CONFIG_MIPS_PB1000 is not set
|
||||
# CONFIG_MIPS_PB1100 is not set
|
||||
# CONFIG_MIPS_PB1200 is not set
|
||||
# CONFIG_MIPS_PB1500 is not set
|
||||
# CONFIG_MIPS_PB1550 is not set
|
||||
# CONFIG_MIPS_SEAD is not set
|
||||
# CONFIG_MIPS_SIM is not set
|
||||
# CONFIG_MIPS_VPE_LOADER is not set
|
||||
# CONFIG_MIPS_XXS1500 is not set
|
||||
CONFIG_MODULE_FORCE_UNLOAD=y
|
||||
# CONFIG_MOMENCO_JAGUAR_ATX is not set
|
||||
# CONFIG_MOMENCO_OCELOT is not set
|
||||
# CONFIG_MOMENCO_OCELOT_3 is not set
|
||||
# CONFIG_MOMENCO_OCELOT_C is not set
|
||||
# CONFIG_MOMENCO_OCELOT_G is not set
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
# CONFIG_MTD_ADM5120 is not set
|
||||
@ -174,7 +163,6 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||
# CONFIG_MTD_MTDRAM is not set
|
||||
# CONFIG_MTD_MYLOADER_PARTS is not set
|
||||
# CONFIG_MTD_OBSOLETE_CHIPS is not set
|
||||
# CONFIG_MTD_ONENAND is not set
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
# CONFIG_MTD_PCI is not set
|
||||
@ -189,6 +177,7 @@ CONFIG_MTD_PHYSMAP_START=0x1fc00000
|
||||
# CONFIG_MTD_REDBOOT_PARTS is not set
|
||||
# CONFIG_MTD_ROM is not set
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
CONFIG_NETDEV_1000=y
|
||||
CONFIG_NET_KEY=y
|
||||
# CONFIG_NET_PCI is not set
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
@ -209,6 +198,7 @@ CONFIG_PCI_ADM5120=y
|
||||
# CONFIG_RTC is not set
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
||||
CONFIG_SCSI_WAIT_SCAN=m
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
CONFIG_SERIAL_ADM5120=y
|
||||
CONFIG_SERIO=y
|
||||
@ -252,7 +242,6 @@ CONFIG_USB_ADM5120_HCD=y
|
||||
# CONFIG_USB_CATC is not set
|
||||
# CONFIG_USB_DEVICEFS is not set
|
||||
# CONFIG_USB_EHCI_HCD is not set
|
||||
# CONFIG_USB_GTCO is not set
|
||||
# CONFIG_USB_KAWETH is not set
|
||||
# CONFIG_USB_PEGASUS is not set
|
||||
# CONFIG_USB_PRINTER is not set
|
||||
@ -263,5 +252,7 @@ CONFIG_USB_ADM5120_HCD=y
|
||||
# CONFIG_USB_USBNET is not set
|
||||
# CONFIG_USB_USBNET_MII is not set
|
||||
# CONFIG_USB_ZD1201 is not set
|
||||
# CONFIG_VGASTATE is not set
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
# CONFIG_ZD1211RW is not set
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
||||
|
Loading…
Reference in New Issue
Block a user