From 90fa6ab7490498794ba7fdaba1b45eb7965db953 Mon Sep 17 00:00:00 2001
From: solar <solar@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Fri, 4 Jun 2004 06:27:21 +0000
Subject: [PATCH] removed untested/broken nocat-auth.mk

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@60 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 obsolete-buildroot/make/nocat-auth.mk | 72 ---------------------------
 1 file changed, 72 deletions(-)
 delete mode 100644 obsolete-buildroot/make/nocat-auth.mk

diff --git a/obsolete-buildroot/make/nocat-auth.mk b/obsolete-buildroot/make/nocat-auth.mk
deleted file mode 100644
index e56e94c47..000000000
--- a/obsolete-buildroot/make/nocat-auth.mk
+++ /dev/null
@@ -1,72 +0,0 @@
-#############################################################
-#
-# nocatauth.c
-#
-# There exists a real need in the embedded community for a 
-# captive portal with authentication. Till now I've been hording 
-# this sweet little creation to myself.
-#
-# NoCatSplash is a Open Public Network Gateway Daemon. It performs as a 
-# [captive/open/active] portal. When run on a gateway/router on a 
-# network, all web requests are redirected until the client clicks I
-# Accept to an AUP. The gateway daemon then changes the firewall rules
-# on the gateway to pass traffic for that client (based on IP address
-# and MAC address).
-#
-# NoCatSplash is the successor to NoCatAuth, which was written in Perl. 
-# NoCatSplash is written in multi-threaded ANSI C in order to be smaller
-# and work better on embedded style devices.
-#
-# NoCatSplash-Auth is the successor to them all which is NoCatSplash 
-# with the features found on NoCatAuth but written in ANSI C in order to
-# be smaller and work better on embedded style devices.
-#
-#############################################################
-NOCATSPLASHAUTH_SOURCE_URL:=
-NOCATSPLASHAUTH_SOURCE=NoCatSplash-auth.tgz
-NOCATSPLASHAUTH_BUILD_DIR=$(BUILD_DIR)/NoCatSplash-auth
-
-$(DL_DIR)/$(NOCATSPLASHAUTH_SOURCE):
-	 $(WGET) -P $(DL_DIR) $(NOCATSPLASHAUTH_SOURCE_URL)/$(NOCATSPLASHAUTH_SOURCE) 
-
-$(NOCATSPLASHAUTH_BUILD_DIR)/.unpacked: $(DL_DIR)/$(NOCATSPLASHAUTH_SOURCE)
-	zcat $(DL_DIR)/$(NOCATSPLASHAUTH_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-	touch $(NOCATSPLASHAUTH_BUILD_DIR)/.unpacked
-
-$(NOCATSPLASHAUTH_BUILD_DIR)/.configured: $(NOCATSPLASHAUTH_BUILD_DIR)/.unpacked
-	# Allow patches.  Needed for openwrt for instance.
-	#$(SOURCE_DIR)/patch-kernel.sh $(NOCATSPLASHAUTH_BUILD_DIR) $(SOURCE_DIR) nocatsplash-*.patch
-	(cd $(NOCATSPLASHAUTH_BUILD_DIR); \
-		./configure \
-			--prefix=/usr \
-			--disable-glibtest \
-			--with-glib-prefix=$(TARGET_DIR)/usr \
-			--with-mode=passive \
-	)
-	touch  $(NOCATSPLASHAUTH_BUILD_DIR)/.configured
-
-$(NOCATSPLASHAUTH_BUILD_DIR)/splashd: $(NOCATSPLASHAUTH_BUILD_DIR)/.configured
-	$(TARGET_CONFIGURE_OPTS) \
-	$(MAKE) -C $(NOCATSPLASHAUTH_BUILD_DIR) \
-		CC=$(TARGET_CC) COPT_FLAGS="$(TARGET_CFLAGS)"
-
-$(TARGET_DIR)/sbin/splashd: $(NOCATSPLASHAUTH_BUILD_DIR)/splashd
-	$(TARGET_CONFIGURE_OPTS) \
-	$(MAKE) -C $(NOCATSPLASHAUTH_BUILD_DIR) \
-		PREFIX=/usr \
-		CC=$(TARGET_CC) COPT_FLAGS="$(TARGET_CFLAGS)" \
-		DESTDIR=$(TARGET_DIR) install
-	$(STRIP) $(TARGET_DIR)/usr/bin/nocat*
-	rm -rf $(TARGET_DIR)/usr/man
-
-nocatauth: $(TARGET_DIR)/sbin/splashd
-
-nocatauth-source: $(DL_DIR)/$(NOCATSPLASHAUTH_SOURCE)
-
-nocatauth-clean:
-	$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(NOCATSPLASHAUTH_BUILD_DIR) uninstall
-	-$(MAKE) -C $(NOCATSPLASHAUTH_BUILD_DIR) clean
-
-nocatauth-dirclean:
-	rm -rf $(NOCATSPLASHAUTH_BUILD_DIR)
-