ar7: remove 2.6.37 support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2024-11-23 23:46:16 +02:00 · 2012-05-05 17:32:43 +00:00 · 2012-05-05 17:32:43 +00:00 · 91b12f1c40
commit 91b12f1c40
parent 7d657a9c91
11 changed files with 0 additions and 727 deletions
--- a/target/linux/ar7/config-2.6.37
+++ b/target/linux/ar7/config-2.6.37
@ -1,162 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_ADM6996_PHY=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-CONFIG_AR7=y
-CONFIG_AR7_GPIO=y
-CONFIG_AR7_WDT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-CONFIG_BOOT_ELF32=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CPMAC=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-# CONFIG_DEBUG_ZBOOT is not set
-CONFIG_DECOMPRESS_LZMA=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-# CONFIG_FSNOTIFY is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_RANDOM=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQ_CPU=y
-CONFIG_KALLSYMS=y
-CONFIG_LEDS_GPIO=y
-# CONFIG_LOONGSON_MC146818 is not set
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD_AR7_PARTS=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MVSWITCH_PHY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NO_EXCEPT_FILL=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PHYLIB=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_POWERTV is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SCSI_MOD=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
-# CONFIG_TINY_RCU is not set
-CONFIG_TRAD_SIGNALS=y
-CONFIG_TREE_RCU=y
-CONFIG_VLYNQ=y
-# CONFIG_VLYNQ_DEBUG is not set
-CONFIG_ZONE_DMA_FLAG=0
--- a/target/linux/ar7/patches-2.6.37/100-titan-gpio-size.patch
+++ b/target/linux/ar7/patches-2.6.37/100-titan-gpio-size.patch
@ -1,33 +0,0 @@
-commit 3e9957b4866f3767f19bf0e543b322ad7906c564
-Author: Florian Fainelli <florian@openwrt.org>
-Date:   Fri May 13 17:41:21 2011 +0200
-
-    MIPS: AR7: Fix GPIO register size for Titan variant.
-    
-    The 'size' variable contains the correct register size for both AR7
-    and Titan, but we never used it to ioremap the correct register size.
-    This problem only shows up on Titan.
-    
-    [ralf@linux-mips.org: Fixed the fix.  The original patch as in patchwork
-    recognizes the problem correctly then fails to fix it ...]
-    
-    Reported-by: Alexander Clouter <alex@digriz.org.uk>
-    Signed-off-by: Florian Fainelli <florian@openwrt.org>
-    Patchwork: https://patchwork.linux-mips.org/patch/2380/
-    Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
-diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c
-index 425dfa5..bb571bc 100644
--- a/arch/mips/ar7/gpio.c
-+++ b/arch/mips/ar7/gpio.c
-@@ -325,9 +325,7 @@ int __init ar7_gpio_init(void)
- 		size = 0x1f;
- 	}
- 
-	gpch->regs = ioremap_nocache(AR7_REGS_GPIO,
-					AR7_REGS_GPIO + 0x10);
-
-+	gpch->regs = ioremap_nocache(AR7_REGS_GPIO, size);
- 	if (!gpch->regs) {
- 		printk(KERN_ERR "%s: failed to ioremap regs\n",
- 					gpch->chip.label);
--- a/target/linux/ar7/patches-2.6.37/110-flash.patch
+++ b/target/linux/ar7/patches-2.6.37/110-flash.patch
@ -1,11 +0,0 @@
--- a/drivers/mtd/maps/physmap.c
-+++ b/drivers/mtd/maps/physmap.c
-@@ -79,7 +79,7 @@ static const char *rom_probe_types[] = {
- 					"map_rom",
- 					NULL };
- #ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
-+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "ar7part", NULL };
- #endif
- 
- static int physmap_flash_probe(struct platform_device *dev)
--- a/target/linux/ar7/patches-2.6.37/120-gpio_chrdev.patch
+++ b/target/linux/ar7/patches-2.6.37/120-gpio_chrdev.patch
@ -1,28 +0,0 @@
--- a/drivers/char/Kconfig
-+++ b/drivers/char/Kconfig
-@@ -990,6 +990,15 @@ config MWAVE
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called mwave.
- 
-+config AR7_GPIO
-+	tristate "TI AR7 GPIO Support"
-+	depends on AR7
-+	help
-+	  Give userspace access to the GPIO pins on the Texas Instruments AR7
-+	  processors.
-+
-+	  If compiled as a module, it will be called ar7_gpio.
-+
- config SCx200_GPIO
- 	tristate "NatSemi SCx200 GPIO Support"
- 	depends on SCx200
--- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -94,6 +94,7 @@ obj-$(CONFIG_HW_RANDOM)		+= hw_random/
- obj-$(CONFIG_PPDEV)		+= ppdev.o
- obj-$(CONFIG_NWBUTTON)		+= nwbutton.o
- obj-$(CONFIG_NWFLASH)		+= nwflash.o
-+obj-$(CONFIG_AR7_GPIO)		+= ar7_gpio.o
- obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio.o
- obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
- obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o
--- a/target/linux/ar7/patches-2.6.37/160-vlynq_try_remote_first.patch
+++ b/target/linux/ar7/patches-2.6.37/160-vlynq_try_remote_first.patch
@ -1,20 +0,0 @@
--- a/drivers/vlynq/vlynq.c
-+++ b/drivers/vlynq/vlynq.c
-@@ -515,9 +515,14 @@ static int __vlynq_enable_device(struct
- 				!__vlynq_try_external(dev))
- 				return 0;
- 		} else {
-			if (!__vlynq_try_external(dev) ||
-				!__vlynq_try_local(dev)    ||
-				!__vlynq_try_remote(dev))
-+            /* XXX: I don't really know what difference it makes, if the order
-+             * of the following calls is changed, but at least in this order
-+             * my fritzbox doesn't hang at startup as in
-+             * https://dev.openwrt.org/ticket/7324
-+             */
-+			if (!__vlynq_try_remote(dev) ||
-+				!__vlynq_try_local(dev)  ||
-+				!__vlynq_try_external(dev))
- 				return 0;
- 		}
- 		break;
--- a/target/linux/ar7/patches-2.6.37/500-serial_kludge.patch
+++ b/target/linux/ar7/patches-2.6.37/500-serial_kludge.patch
@ -1,28 +0,0 @@
--- a/drivers/serial/8250.c
-+++ b/drivers/serial/8250.c
-@@ -302,6 +302,13 @@ static const struct serial8250_config ua
- 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- 		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
- 	},
-+	[PORT_AR7] = {
-+		.name		= "TI-AR7",
-+		.fifo_size	= 16,
-+		.tx_loadsz	= 16,
-+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
-+		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
-+	},
- };
- 
- #if defined(CONFIG_MIPS_ALCHEMY)
-@@ -2773,7 +2780,11 @@ static void serial8250_console_putchar(s
- {
- 	struct uart_8250_port *up = (struct uart_8250_port *)port;
- 
-+#ifdef CONFIG_AR7
-+	wait_for_xmitr(up, BOTH_EMPTY);
-+#else
- 	wait_for_xmitr(up, UART_LSR_THRE);
-+#endif
- 	serial_out(up, UART_TX, ch);
- }
- 
--- a/target/linux/ar7/patches-2.6.37/920-ar7part.patch
+++ b/target/linux/ar7/patches-2.6.37/920-ar7part.patch
@ -1,55 +0,0 @@
--- a/drivers/mtd/ar7part.c
-+++ b/drivers/mtd/ar7part.c
-@@ -27,12 +27,14 @@
- #include <linux/mtd/partitions.h>
- #include <linux/bootmem.h>
- #include <linux/magic.h>
-+#include <asm/mach-ar7/prom.h>
- 
- #define AR7_PARTS	4
- #define ROOT_OFFSET	0xe0000
- 
- #define LOADER_MAGIC1	le32_to_cpu(0xfeedfa42)
- #define LOADER_MAGIC2	le32_to_cpu(0xfeed1281)
-+#define LOADER_MAGIC3	le32_to_cpu(0x434d4d4c)
- 
- #ifndef SQUASHFS_MAGIC
- #define SQUASHFS_MAGIC	0x73717368
-@@ -44,6 +46,10 @@ struct ar7_bin_rec {
- 	unsigned int address;
- };
- 
-+int create_titan_partitions(struct mtd_info *master,
-+        struct mtd_partition **pparts,
-+        unsigned long origin);
-+
- static int create_mtd_partitions(struct mtd_info *master,
- 				 struct mtd_partition **pparts,
- 				 unsigned long origin)
-@@ -57,6 +63,16 @@ static int create_mtd_partitions(struct
- 	int retries = 10;
- 	struct mtd_partition *ar7_parts;
- 
-+	const char *prod_id ;
-+	prod_id = prom_getenv("ProductID");
-+	if(prod_id && 
-+		(strcmp(prod_id, "CYWL")==0 ||
-+		strcmp(prod_id, "CYWM")==0 ||
-+		strcmp(prod_id, "CYLM")==0 ||
-+		strcmp(prod_id, "CYLL")==0)){
-+		return create_titan_partitions(master, pparts, origin);
-+	}
-+
- 	ar7_parts = kzalloc(sizeof(*ar7_parts) * AR7_PARTS, GFP_KERNEL);
- 	if (!ar7_parts)
- 		return -ENOMEM;
--- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
- obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
-+obj-$(CONFIG_MTD_AR7_PARTS)	+= titanpart.o
- obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- 
--- a/target/linux/ar7/patches-2.6.37/950-cpmac_titan.patch
+++ b/target/linux/ar7/patches-2.6.37/950-cpmac_titan.patch
@ -1,49 +0,0 @@
--- a/drivers/net/cpmac.c
-+++ b/drivers/net/cpmac.c
-@@ -1155,6 +1155,8 @@ static int __devinit cpmac_probe(struct
- 		goto fail;
- 	}
- 
-+	ar7_device_reset(pdata->reset_bit);
-+
- 	dev->irq = platform_get_irq_byname(pdev, "irq");
- 
- 	dev->netdev_ops = &cpmac_netdev_ops;
-@@ -1231,7 +1233,7 @@ int __devinit cpmac_init(void)
- 	cpmac_mii->reset = cpmac_mdio_reset;
- 	cpmac_mii->irq = mii_irqs;
- 
-	cpmac_mii->priv = ioremap(AR7_REGS_MDIO, 256);
-+	cpmac_mii->priv = ioremap(ar7_is_titan() ? TITAN_REGS_MDIO : AR7_REGS_MDIO, 256);
- 
- 	if (!cpmac_mii->priv) {
- 		printk(KERN_ERR "Can't ioremap mdio registers\n");
-@@ -1242,10 +1244,16 @@ int __devinit cpmac_init(void)
- #warning FIXME: unhardcode gpio&reset bits
- 	ar7_gpio_disable(26);
- 	ar7_gpio_disable(27);
-	ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
-	ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
-+
-+	if (!ar7_is_titan()) {
-+		ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
-+		ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
-+	}
- 	ar7_device_reset(AR7_RESET_BIT_EPHY);
- 
-+	if (ar7_is_titan())
-+		ar7_device_reset(TITAN_RESET_BIT_EPHY1);
-+
- 	cpmac_mii->reset(cpmac_mii);
- 
- 	for (i = 0; i < 300; i++)
-@@ -1260,7 +1268,8 @@ int __devinit cpmac_init(void)
- 		mask = 0;
- 	}
- 
-	cpmac_mii->phy_mask = ~(mask | 0x80000000);
-+	cpmac_mii->phy_mask = ar7_is_titan()? ~(mask | 0x80000000 | 0x40000000) :
-+		~(mask | 0x80000000);
- 	snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "1");
- 
- 	res = mdiobus_register(cpmac_mii);
--- a/target/linux/ar7/patches-2.6.37/972-cpmac_fixup.patch
+++ b/target/linux/ar7/patches-2.6.37/972-cpmac_fixup.patch
@ -1,218 +0,0 @@
--- a/arch/mips/ar7/platform.c
-+++ b/arch/mips/ar7/platform.c
-@@ -33,7 +33,6 @@
- #include <linux/string.h>
- #include <linux/etherdevice.h>
- #include <linux/phy.h>
-#include <linux/phy_fixed.h>
- #include <linux/gpio.h>
- #include <linux/clk.h>
- 
-@@ -248,12 +247,6 @@ static struct resource cpmac_high_res[]
- 	},
- };
- 
-static struct fixed_phy_status fixed_phy_status __initdata = {
-	.link		= 1,
-	.speed		= 100,
-	.duplex		= 1,
-};
-
- static struct plat_cpmac_data cpmac_low_data = {
- 	.reset_bit	= 17,
- 	.power_bit	= 20,
-@@ -643,26 +636,18 @@ static int __init ar7_register_devices(v
- 	}
- 
- 	if (ar7_has_high_cpmac()) {
-		res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
-		if (!res) {
-			cpmac_get_mac(1, cpmac_high_data.dev_addr);
-
-			res = platform_device_register(&cpmac_high);
-			if (res)
-				pr_warning("unable to register cpmac-high: %d\n", res);
-		} else
-			pr_warning("unable to add cpmac-high phy: %d\n", res);
-	} else
-		cpmac_low_data.phy_mask = 0xffffffff;
-+		cpmac_get_mac(1, cpmac_high_data.dev_addr);
- 
-	res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
-	if (!res) {
-		cpmac_get_mac(0, cpmac_low_data.dev_addr);
-		res = platform_device_register(&cpmac_low);
-+		res = platform_device_register(&cpmac_high);
- 		if (res)
-			pr_warning("unable to register cpmac-low: %d\n", res);
-+			pr_warning("unable to register cpmac-high: %d\n", res);
- 	} else
-		pr_warning("unable to add cpmac-low phy: %d\n", res);
-+		cpmac_low_data.phy_mask = 0xffffffff;
-+
-+	cpmac_get_mac(0, cpmac_low_data.dev_addr);
-+	res = platform_device_register(&cpmac_low);
-+	if (res)
-+		pr_warning("unable to register cpmac-low: %d\n", res);
- 
- 	detect_leds();
- 	res = platform_device_register(&ar7_gpio_leds);
-@@ -675,8 +660,10 @@ static int __init ar7_register_devices(v
- 
- 	/* Register watchdog only if enabled in hardware */
- 	bootcr = ioremap_nocache(AR7_REGS_DCL, 4);
-	val = readl(bootcr);
-	iounmap(bootcr);
-+	if (bootcr) {
-+		val = readl(bootcr);
-+		iounmap(bootcr);
-+	}
- 	if (val & AR7_WDT_HW_ENA) {
- 		if (ar7_has_high_vlynq())
- 			ar7_wdt_res.start = UR8_REGS_WDT;
--- a/arch/mips/include/asm/mach-ar7/ar7.h
-+++ b/arch/mips/include/asm/mach-ar7/ar7.h
-@@ -42,6 +42,7 @@
- #define AR7_REGS_PINSEL (AR7_REGS_BASE + 0x160C)
- #define AR7_REGS_VLYNQ0	(AR7_REGS_BASE + 0x1800)
- #define AR7_REGS_DCL	(AR7_REGS_BASE + 0x1a00)
-+#define AR7_REGS_MII	(AR7_REGS_BASE + 0x1a08)
- #define AR7_REGS_VLYNQ1	(AR7_REGS_BASE + 0x1c00)
- #define AR7_REGS_MDIO	(AR7_REGS_BASE + 0x1e00)
- #define AR7_REGS_IRQ	(AR7_REGS_BASE + 0x2400)
--- a/drivers/net/cpmac.c
-+++ b/drivers/net/cpmac.c
-@@ -34,7 +34,6 @@
- #include <linux/skbuff.h>
- #include <linux/mii.h>
- #include <linux/phy.h>
-#include <linux/phy_fixed.h>
- #include <linux/platform_device.h>
- #include <linux/dma-mapping.h>
- #include <linux/clk.h>
-@@ -47,14 +46,11 @@ MODULE_LICENSE("GPL");
- MODULE_ALIAS("platform:cpmac");
- 
- static int debug_level = 8;
-static int dumb_switch;
- 
-/* Next 2 are only used in cpmac_probe, so it's pointless to change them */
-+/* Next is only used in cpmac_probe, so it's pointless to change them */
- module_param(debug_level, int, 0444);
-module_param(dumb_switch, int, 0444);
- 
- MODULE_PARM_DESC(debug_level, "Number of NETIF_MSG bits to enable");
-MODULE_PARM_DESC(dumb_switch, "Assume switch is not connected to MDIO bus");
- 
- #define CPMAC_VERSION "0.5.2"
- /* frame size + 802.1q tag + FCS size */
-@@ -673,9 +669,8 @@ static void cpmac_hw_start(struct net_de
- 	for (i = 0; i < 8; i++)
- 		cpmac_write(priv->regs, CPMAC_MAC_ADDR_LO(i), dev->dev_addr[5]);
- 	cpmac_write(priv->regs, CPMAC_MAC_ADDR_MID, dev->dev_addr[4]);
-	cpmac_write(priv->regs, CPMAC_MAC_ADDR_HI, dev->dev_addr[0] |
-		    (dev->dev_addr[1] << 8) | (dev->dev_addr[2] << 16) |
-		    (dev->dev_addr[3] << 24));
-+	cpmac_write(priv->regs, CPMAC_MAC_ADDR_HI, be32_to_cpu(*(u32 *)
-+			dev->dev_addr));
- 	cpmac_write(priv->regs, CPMAC_MAX_LENGTH, CPMAC_SKB_SIZE);
- 	cpmac_write(priv->regs, CPMAC_UNICAST_CLEAR, 0xff);
- 	cpmac_write(priv->regs, CPMAC_RX_INT_CLEAR, 0xff);
-@@ -1107,8 +1102,6 @@ static const struct net_device_ops cpmac
- 	.ndo_set_mac_address	= eth_mac_addr,
- };
- 
-static int external_switch;
-
- static int __devinit cpmac_probe(struct platform_device *pdev)
- {
- 	int rc, phy_id;
-@@ -1120,25 +1113,18 @@ static int __devinit cpmac_probe(struct
- 
- 	pdata = pdev->dev.platform_data;
- 
-	if (external_switch || dumb_switch) {
-		strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
-		phy_id = pdev->id;
-	} else {
-		for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
-			if (!(pdata->phy_mask & (1 << phy_id)))
-				continue;
-			if (!cpmac_mii->phy_map[phy_id])
-				continue;
-			strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE);
-			break;
-		}
-+	for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
-+		if (!(pdata->phy_mask & (1 << phy_id)))
-+			continue;
-+		if (!cpmac_mii->phy_map[phy_id])
-+			continue;
-+		strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE);
-+		break;
- 	}
- 
- 	if (phy_id == PHY_MAX_ADDR) {
-		dev_err(&pdev->dev, "no PHY present, falling back "
-					"to switch on MDIO bus 0\n");
-		strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
-		phy_id = pdev->id;
-+		printk(KERN_ERR "cpmac: No PHY present\n");
-+		return -ENXIO;
- 	}
- 
- 	dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);
-@@ -1227,6 +1213,7 @@ int __devinit cpmac_init(void)
- {
- 	u32 mask;
- 	int i, res;
-+	void __iomem *mii_reg;
- 
- 	cpmac_mii = mdiobus_alloc();
- 	if (cpmac_mii == NULL)
-@@ -1250,14 +1237,14 @@ int __devinit cpmac_init(void)
- 	ar7_gpio_disable(26);
- 	ar7_gpio_disable(27);
- 
-	if (!ar7_is_titan()) {
-+	if (ar7_is_titan()) {
-+		ar7_device_reset(AR7_RESET_BIT_EPHY);
-+		ar7_device_reset(TITAN_RESET_BIT_EPHY1);
-+	} else {
-+		ar7_device_reset(AR7_RESET_BIT_EPHY);
- 		ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
- 		ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
- 	}
-	ar7_device_reset(AR7_RESET_BIT_EPHY);
-
-	if (ar7_is_titan())
-		ar7_device_reset(TITAN_RESET_BIT_EPHY1);
- 
- 	cpmac_mii->reset(cpmac_mii);
- 
-@@ -1269,10 +1256,22 @@ int __devinit cpmac_init(void)
- 			msleep(10);
- 	}
- 
-	mask &= 0x7fffffff;
-+	mask &= ar7_is_titan()? ~(0x80000000 | 0x40000000) : ~(0x80000000);
- 	if (mask & (mask - 1)) {
-		external_switch = 1;
-		mask = 0;
-+		if (!ar7_has_high_cpmac()) {
-+			if (ar7_is_titan()) {
-+				ar7_device_disable(AR7_RESET_BIT_EPHY);
-+				ar7_device_disable(TITAN_RESET_BIT_EPHY1);
-+			} else
-+				ar7_device_disable(AR7_RESET_BIT_EPHY);
-+
-+			//Titan remap might be different
-+			mii_reg = ioremap(AR7_REGS_MII, 4);
-+			if (mii_reg) {
-+				writel(readl(mii_reg) | 1, mii_reg);
-+				iounmap(mii_reg);
-+			}
-+		}
- 	}
- 
- 	cpmac_mii->phy_mask = ar7_is_titan()? ~(mask | 0x80000000 | 0x40000000) :
--- a/target/linux/ar7/patches-2.6.37/973-cpmac_handle_mvswitch.patch
+++ b/target/linux/ar7/patches-2.6.37/973-cpmac_handle_mvswitch.patch
@ -1,70 +0,0 @@
--- a/drivers/net/cpmac.c
-+++ b/drivers/net/cpmac.c
-@@ -372,6 +372,7 @@ static struct sk_buff *cpmac_rx_one(stru
- 				    struct cpmac_desc *desc)
- {
- 	struct sk_buff *skb, *result = NULL;
-+	int offset;
- 
- 	if (unlikely(netif_msg_hw(priv)))
- 		cpmac_dump_desc(priv->dev, desc);
-@@ -383,10 +384,15 @@ static struct sk_buff *cpmac_rx_one(stru
- 		return NULL;
- 	}
- 
-	skb = netdev_alloc_skb_ip_align(priv->dev, CPMAC_SKB_SIZE);
-+	skb = netdev_alloc_skb(priv->dev, CPMAC_SKB_SIZE);
- 	if (likely(skb)) {
-+		offset = 2;
-+		if (priv->phy) {
-+			offset += priv->phy->pkt_align;
-+		}
-+		skb_reserve(skb, offset);
-+
- 		skb_put(desc->skb, desc->datalen);
-		desc->skb->protocol = eth_type_trans(desc->skb, priv->dev);
- 		skb_checksum_none_assert(desc->skb);
- 		priv->dev->stats.rx_packets++;
- 		priv->dev->stats.rx_bytes += desc->datalen;
-@@ -458,7 +464,12 @@ static int cpmac_poll(struct napi_struct
- 
- 		skb = cpmac_rx_one(priv, desc);
- 		if (likely(skb)) {
-			netif_receive_skb(skb);
-+			if (priv->phy->netif_receive_skb) {
-+				priv->phy->netif_receive_skb(skb);
-+			} else {
-+				skb->protocol = eth_type_trans(skb, priv->dev);
-+				netif_receive_skb(skb);
-+			}
- 			received++;
- 		}
- 		desc = desc->next;
-@@ -951,7 +962,7 @@ static void cpmac_adjust_link(struct net
- 
- static int cpmac_open(struct net_device *dev)
- {
-	int i, size, res;
-+	int i, size, res, offset;
- 	struct cpmac_priv *priv = netdev_priv(dev);
- 	struct resource *mem;
- 	struct cpmac_desc *desc;
-@@ -990,11 +1001,17 @@ static int cpmac_open(struct net_device
- 
- 	priv->rx_head = &priv->desc_ring[CPMAC_QUEUES];
- 	for (i = 0, desc = priv->rx_head; i < priv->ring_size; i++, desc++) {
-		skb = netdev_alloc_skb_ip_align(dev, CPMAC_SKB_SIZE);
-+		skb = netdev_alloc_skb(dev, CPMAC_SKB_SIZE);
- 		if (unlikely(!skb)) {
- 			res = -ENOMEM;
- 			goto fail_desc;
- 		}
-+		offset = 2;
-+		if (priv->phy) {
-+			offset += priv->phy->pkt_align;
-+		}
-+		skb_reserve(skb, offset);
-+
- 		desc->skb = skb;
- 		desc->data_mapping = dma_map_single(&dev->dev, skb->data,
- 						    CPMAC_SKB_SIZE,
--- a/target/linux/ar7/patches-2.6.37/999-gt701_leds.patch
+++ b/target/linux/ar7/patches-2.6.37/999-gt701_leds.patch
@ -1,53 +0,0 @@
--- a/arch/mips/ar7/platform.c
-+++ b/arch/mips/ar7/platform.c
-@@ -455,6 +455,40 @@ static struct gpio_led fb_fon_leds[] = {
- 	},
- };
- 
-+static struct gpio_led gt701_leds[] = {
-+	{
-+		.name			= "inetgreen",
-+		.gpio			= 13,
-+		.active_low		= 1,
-+	},
-+	{
-+		.name			= "usb",
-+		.gpio			= 12,
-+		.active_low		= 1,
-+	},
-+	{
-+		.name			= "inetred",
-+		.gpio			= 9,
-+		.active_low		= 1,
-+	},
-+	{
-+		.name			= "powerred",
-+		.gpio			= 7,
-+		.active_low		= 1,
-+	},
-+	{
-+		.name			= "powergreen",
-+		.gpio			= 8,
-+		.active_low		= 1,
-+		.default_trigger	= "default-on",
-+	},
-+        {
-+                .name                   = "ethernet",
-+                .gpio                   = 10,
-+                .active_low             = 1,
-+        },
-+};
-+
- static struct gpio_led_platform_data ar7_led_data;
- 
- static struct platform_device ar7_gpio_leds = {
-@@ -496,6 +530,9 @@ static void __init detect_leds(void)
- 	} else if (strstr(prid, "CYWM") || strstr(prid, "CYWL")) {
- 		ar7_led_data.num_leds = ARRAY_SIZE(titan_leds);
- 		ar7_led_data.leds = titan_leds;
-+	} else if (strstr(prid, "GT701")) {
-+		ar7_led_data.num_leds = ARRAY_SIZE(gt701_leds);
-+		ar7_led_data.leds = gt701_leds;
- 	}
- }
-