ramips: add support for the Senao/EnGenius ESR-9753 board

Signed-off-by: Artur Wronowski <arteqw@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29603 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/ramips/base-files/etc/diag.sh

@@ -33,6 +33,9 @@ get_status_led() {
 	dir-300-b1 | dir-600-b1 | dir-600-b2)
 		status_led="d-link:green:status"
 		;;
+	esr-9753)
+		status_led="esr-9753:orange:power"
+		;;
 	fonera20n)
 		status_led="fonera20n:green:power"
 		;;

target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom

@@ -47,6 +47,7 @@ case "$FIRMWARE" in
 
 	argus-atp52b | \
 	bc2 | \
+	esr-9753 | \
 	fonera20n | \
 	hw550-3g | \
 	mofi3500-3gn | \

target/linux/ramips/base-files/etc/uci-defaults/leds

@@ -16,12 +16,29 @@ commit system
 EOF
 }
 
+set_wifi_led() {
+	local sysfs="$1"
+
+	uci batch <<EOF
+set system.wifi_led=led
+set system.wifi_led.name='wifi'
+set system.wifi_led.sysfs='$sysfs'
+set system.wifi_led.trigger='netdev'
+set system.wifi_led.dev='wlan0'
+set system.wifi_led.mode='link rx tx'
+commit system
+EOF
+}
+
 board=$(ramips_board_name)
 
 case $board in
 	bc2)
 		set_usb_led "bc2:blue:usb"
 		;;
+	esr-9753)
+		set_wifi_led "rt2800pci-phy0::radio"
+		;;
 	fonera20n)
 		set_usb_led "fonera20n:amber:usb"
 		;;

target/linux/ramips/base-files/etc/uci-defaults/network

@@ -68,6 +68,7 @@ ramips_setup_macs()
 		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 		;;
 
+	esr-9753 | \
 	nbg-419n)
                 lan_mac=$(ramips_get_mac_binary factory 4)
                 wan_mac=$(ramips_get_mac_binary factory 40)

target/linux/ramips/base-files/lib/preinit/06_set_iface_mac

@@ -8,7 +8,7 @@ preinit_set_mac_address() {
 	. /lib/ramips.sh
 
 	case $(ramips_board_name) in
-	bc2 | nw718)
+	bc2 | nw718 | esr-9753)
 		mac=$(ramips_get_mac_binary factory 4)
 		mac=$(maccalc or "$mac" "02:00:00:00:00:00")
 		ifconfig eth0 hw ether $mac 2>/dev/null

target/linux/ramips/base-files/lib/ramips.sh

@@ -62,6 +62,9 @@ ramips_board_name() {
 	*"DIR-600 B2")
 		name="dir-600-b2"
 		;;
+	*"ESR-9753")
+		name="esr-9753"
+		;;
 	*"F5D8235 v2")
 		name="f5d8235-v2"
 		;;