qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-26 02:02:23 +02:00
Code

atheros: clean up the 2.6.28 port in preparation for pushing it upstream

Browse Source 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14967 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
nbd 2009-03-22 14:46:58 +00:00
parent b150231d58
commit a5c4f54406
42 changed files with 6299 additions and 6547 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

281
package/madwifi/patches/410-ar231x_2.6.28.patch Normal file
View File

@ -0,0 +1,281 @@
--- a/ath/if_ath_ahb.c
+++ b/ath/if_ath_ahb.c
@@ -33,20 +33,15 @@
#include "if_ath_ahb.h"
#include "ah_soc.h"
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
-#error "Kernel versions older than 2.6.19 are not supported!"
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28)
+#include <ar231x_platform.h>
#endif
struct ath_ahb_softc {
struct ath_softc aps_sc;
-#ifdef CONFIG_PM
- u32 aps_pmstate[16];
-#endif
+ struct ar531x_config aps_config;
};
-static struct ath_ahb_softc *sclist[2] = {NULL, NULL};
-static u_int8_t num_activesc = 0;
-
/*
* Module glue.
*/
@@ -101,13 +96,13 @@ ahb_enable_wmac(u_int16_t devid, u_int16
while (REG_READ(AR5315_PCI_MAC_PCICFG) & AR5315_PCI_MAC_PCICFG_SPWR_DN);
} else {
switch (wlanNum) {
- case AR531X_WLAN0_NUM:
+ case 0:
reset = (AR531X_RESET_WLAN0 |
AR531X_RESET_WARM_WLAN0_MAC |
AR531X_RESET_WARM_WLAN0_BB);
enable = AR531X_ENABLE_WLAN0;
break;
- case AR531X_WLAN1_NUM:
+ case 1:
reset = (AR531X_RESET_WLAN1 |
AR531X_RESET_WARM_WLAN1_MAC |
AR531X_RESET_WARM_WLAN1_BB);
@@ -144,10 +139,10 @@ ahb_disable_wmac(u_int16_t devid, u_int1
*en &= ~AR5315_ARB_WLAN;
} else {
switch (wlanNum) {
- case AR531X_WLAN0_NUM:
+ case 0:
enable = AR531X_ENABLE_WLAN0;
break;
- case AR531X_WLAN1_NUM:
+ case 1:
enable = AR531X_ENABLE_WLAN1;
break;
default:
@@ -159,29 +154,6 @@ ahb_disable_wmac(u_int16_t devid, u_int1
}
-static int
-exit_ath_wmac(u_int16_t wlanNum, struct ar531x_config *config)
-{
- struct ath_ahb_softc *sc = sclist[wlanNum];
- struct net_device *dev;
- u_int16_t devid;
-
- if (sc == NULL)
- return -ENODEV; /* XXX: correct return value? */
-
- dev = sc->aps_sc.sc_dev;
- ath_detach(dev);
- if (dev->irq)
- free_irq(dev->irq, dev);
- devid = sc->aps_sc.devid;
- config->tag = (void *)((unsigned long) devid);
-
- ahb_disable_wmac(devid, wlanNum);
- free_netdev(dev);
- sclist[wlanNum] = NULL;
- return 0;
-}
-
static const char ubnt[] = "Ubiquiti Networks";
static const struct ath_hw_detect cards[] = {
{
@@ -266,6 +238,114 @@ static const struct ath_hw_detect cards[
},
};
+static void
+ahb_hw_detect(struct ath_ahb_softc *sc, const char *radio)
+{
+ u16 *radio_data = (u16 *) radio;
+ if (radio_data) {
+ u16 vendor, id, subvendor, subid;
+ vendor = radio_data[1];
+ id = radio_data[0];
+ subvendor = radio_data[8];
+ subid = radio_data[7];
+ ath_hw_detect(&sc->aps_sc, cards, ARRAY_SIZE(cards), vendor, id, subvendor, subid);
+ }
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28)
+
+static int ahb_wmac_probe(struct platform_device *pdev)
+{
+ struct ar231x_board_config *bcfg = pdev->dev.platform_data;
+ struct ath_ahb_softc *sc;
+ struct net_device *dev;
+ struct resource *res;
+ const char *athname;
+ int err;
+
+ ahb_enable_wmac(bcfg->devid, pdev->id);
+ dev = alloc_netdev(sizeof(struct ath_ahb_softc), "wifi%d", ether_setup);
+ if (!dev)
+ return -ENOMEM;
+
+ sc = dev->priv;
+ sc->aps_sc.sc_dev = dev;
+
+ dev->irq = platform_get_irq(pdev, 0);
+ if (dev->irq <= 0) {
+ printk("%s: Cannot find IRQ resource\n", dev->name);
+ goto error;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ printk("%s: Cannot find MMIO resource\n", dev->name);
+ goto error;
+ }
+
+ dev->mem_start = KSEG1ADDR(res->start);
+ dev->mem_end = KSEG1ADDR(res->end);
+ sc->aps_sc.sc_iobase = (void __iomem *) dev->mem_start;
+ sc->aps_sc.sc_bdev = NULL;
+
+ /* bus information for the HAL */
+ sc->aps_config.board = (const struct ar531x_boarddata *) bcfg->config;
+ sc->aps_config.radio = bcfg->radio;
+ sc->aps_config.unit = pdev->id;
+ sc->aps_config.tag = NULL;
+
+ err = ath_attach(bcfg->devid, dev, &sc->aps_config);
+ if (err != 0) {
+ printk("%s: ath_attach failed: %d\n", dev->name, err);
+ goto error;
+ }
+
+ athname = ath_hal_probe(ATHEROS_VENDOR_ID, bcfg->devid);
+ printk(KERN_INFO "%s: %s: %s: mem=0x%lx, irq=%d\n",
+ dev_info, dev->name, athname ? athname : "Atheros ???", dev->mem_start, dev->irq);
+
+ if (request_irq(dev->irq, ath_intr, IRQF_SHARED|IRQF_DISABLED, dev->name, dev)) {
+ printk(KERN_WARNING "%s: %s: request_irq failed\n", dev_info, dev->name);
+ goto error;
+ }
+
+ sc->aps_sc.sc_softled = 1; /* SoftLED over GPIO */
+ sc->aps_sc.sc_ledpin = bcfg->config->sysLedGpio;
+ sc->aps_sc.sc_invalid = 0;
+ ahb_hw_detect(sc, bcfg->radio);
+ platform_set_drvdata(pdev, dev);
+ return 0;
+
+error_dev:
+ free_irq(dev->irq, dev);
+error:
+ free_netdev(dev);
+
+ return -ENODEV;
+}
+
+
+static int ahb_wmac_remove(struct platform_device *pdev)
+{
+ struct ar231x_board_config *bcfg = pdev->dev.platform_data;
+ struct net_device *dev;
+
+ dev = platform_get_drvdata(pdev);
+ ath_detach(dev);
+
+ if (dev->irq)
+ free_irq(dev->irq, dev);
+
+ ahb_disable_wmac(bcfg->devid, pdev->id);
+ free_netdev(dev);
+
+ return 0;
+}
+
+#else
+
+static struct ath_ahb_softc *sclist[2] = {NULL, NULL};
+
static int
init_ath_wmac(u_int16_t devid, u_int16_t wlanNum, struct ar531x_config *config)
{
@@ -318,7 +398,7 @@ init_ath_wmac(u_int16_t devid, u_int16_t
sc->aps_sc.sc_iobase = (void __iomem *) dev->mem_start;
sc->aps_sc.sc_bdev = NULL;
- if (request_irq(dev->irq, ath_intr, IRQF_SHARED, dev->name, dev)) {
+ if (request_irq(dev->irq, ath_intr, IRQF_SHARED|IRQF_DISABLED, dev->name, dev)) {
printk(KERN_WARNING "%s: %s: request_irq failed\n", dev_info, dev->name);
goto bad3;
}
@@ -328,21 +408,12 @@ init_ath_wmac(u_int16_t devid, u_int16_t
athname = ath_hal_probe(ATHEROS_VENDOR_ID, devid);
printk(KERN_INFO "%s: %s: %s: mem=0x%lx, irq=%d\n",
dev_info, dev->name, athname ? athname : "Atheros ???", dev->mem_start, dev->irq);
- num_activesc++;
/* Ready to process interrupts */
sc->aps_sc.sc_softled = 1; /* SoftLED over GPIO */
sc->aps_sc.sc_ledpin = config->board->sysLedGpio;
sc->aps_sc.sc_invalid = 0;
- radio_data = (u16 *) config->radio;
- if (radio_data) {
- u16 vendor, id, subvendor, subid;
- vendor = radio_data[1];
- id = radio_data[0];
- subvendor = radio_data[8];
- subid = radio_data[7];
- ath_hw_detect(&sc->aps_sc, cards, ARRAY_SIZE(cards), vendor, id, subvendor, subid);
- }
+ ahb_hw_detect(sc, config->radio);
return 0;
@@ -357,6 +428,29 @@ init_ath_wmac(u_int16_t devid, u_int16_t
return -ENODEV;
}
+static int
+exit_ath_wmac(u_int16_t wlanNum, struct ar531x_config *config)
+{
+ struct ath_ahb_softc *sc = sclist[wlanNum];
+ struct net_device *dev;
+ u_int16_t devid;
+
+ if (sc == NULL)
+ return -ENODEV; /* XXX: correct return value? */
+
+ dev = sc->aps_sc.sc_dev;
+ ath_detach(dev);
+ if (dev->irq)
+ free_irq(dev->irq, dev);
+ devid = sc->aps_sc.devid;
+ config->tag = (void *)((unsigned long) devid);
+
+ ahb_disable_wmac(devid, wlanNum);
+ free_netdev(dev);
+ sclist[wlanNum] = NULL;
+ return 0;
+}
+
static int ahb_wmac_probe(struct platform_device *pdev)
{
u_int16_t devid;
@@ -377,11 +471,18 @@ static int ahb_wmac_remove(struct platfo
return 0;
}
+#endif
+
static struct platform_driver ahb_wmac_driver = {
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28)
+ .driver.name = "ar231x-wmac",
+#else
.driver.name = "ar531x-wmac",
+#endif
.probe = ahb_wmac_probe,
.remove = ahb_wmac_remove
};
+
int
ath_ioctl_ethtool(struct ath_softc *sc, int cmd, void __user *addr)
{

35
target/linux/atheros/config-2.6.28
View File

@ -1,6 +1,6 @@
CONFIG_32BIT=y CONFIG_32BIT=y
# CONFIG_64BIT is not set # CONFIG_64BIT is not set
CONFIG_AR2313=y CONFIG_AR231X_ETHERNET=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_POPULATES_NODE_MAP=y
@ -8,16 +8,13 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ATHEROS=y CONFIG_ATHEROS=y
CONFIG_ATHEROS_AR2315=y
CONFIG_ATHEROS_AR2315_PCI=y
CONFIG_ATHEROS_AR5312=y CONFIG_ATHEROS_AR5312=y
CONFIG_ATHEROS_AR5315=y
CONFIG_ATHEROS_AR5315_PCI=y
CONFIG_ATHEROS_WDT=y CONFIG_ATHEROS_WDT=y
# CONFIG_ATM is not set
# CONFIG_ATMEL is not set
CONFIG_BASE_SMALL=0 CONFIG_BASE_SMALL=0
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
CONFIG_BITREVERSE=y CONFIG_BITREVERSE=y
# CONFIG_BT is not set
CONFIG_CEVT_R4K=y CONFIG_CEVT_R4K=y
CONFIG_CLASSIC_RCU=y CONFIG_CLASSIC_RCU=y
CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2 init=/etc/preinit" CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2 init=/etc/preinit"
@ -51,12 +48,6 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
# CONFIG_CPU_TX39XX is not set # CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_TX49XX is not set # CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_VR41XX is not set # CONFIG_CPU_VR41XX is not set
# CONFIG_CRYPTO_AEAD2 is not set
# CONFIG_CRYPTO_ALGAPI2 is not set
# CONFIG_CRYPTO_BLKCIPHER2 is not set
# CONFIG_CRYPTO_HASH2 is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_RNG2 is not set
CONFIG_CSRC_R4K=y CONFIG_CSRC_R4K=y
CONFIG_DEVPORT=y CONFIG_DEVPORT=y
# CONFIG_DM9000 is not set # CONFIG_DM9000 is not set
@ -64,7 +55,6 @@ CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NONCOHERENT=y
# CONFIG_FIXED_PHY is not set # CONFIG_FIXED_PHY is not set
# CONFIG_FREEZER is not set # CONFIG_FREEZER is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_CMOS_UPDATE=y
@ -81,7 +71,6 @@ CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_HAVE_IDE=y CONFIG_HAVE_IDE=y
CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_OPROFILE=y
# CONFIG_HERMES is not set
CONFIG_HW_HAS_PCI=y CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM=y
# CONFIG_I2C is not set # CONFIG_I2C is not set
@ -91,8 +80,6 @@ CONFIG_HW_RANDOM=y
CONFIG_ICPLUS_PHY=y CONFIG_ICPLUS_PHY=y
# CONFIG_IDE is not set # CONFIG_IDE is not set
CONFIG_INITRAMFS_SOURCE="" CONFIG_INITRAMFS_SOURCE=""
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IRQ_CPU=y CONFIG_IRQ_CPU=y
# CONFIG_ISDN is not set # CONFIG_ISDN is not set
CONFIG_KMOD=y CONFIG_KMOD=y
@ -120,6 +107,7 @@ CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
CONFIG_MTD=y CONFIG_MTD=y
# CONFIG_MTD_ABSENT is not set # CONFIG_MTD_ABSENT is not set
CONFIG_MTD_AR2315=y
CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y CONFIG_MTD_BLOCK=y
# CONFIG_MTD_BLOCK2MTD is not set # CONFIG_MTD_BLOCK2MTD is not set
@ -168,9 +156,7 @@ CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# CONFIG_MTD_ROM is not set # CONFIG_MTD_ROM is not set
# CONFIG_MTD_SLRAM is not set # CONFIG_MTD_SLRAM is not set
CONFIG_MTD_SPIFLASH=y
# CONFIG_NET_PCI is not set # CONFIG_NET_PCI is not set
CONFIG_NF_CT_ACCT=y
# CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_NO_IOPORT is not set # CONFIG_NO_IOPORT is not set
# CONFIG_NXP_STB220 is not set # CONFIG_NXP_STB220 is not set
@ -191,11 +177,10 @@ CONFIG_PHYLIB=y
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
# CONFIG_PROBE_INITRD_HEADER is not set # CONFIG_PROBE_INITRD_HEADER is not set
# CONFIG_PROM_EMU is not set # CONFIG_PROM_EMU is not set
CONFIG_RFKILL_LEDS=y
CONFIG_RTC_LIB=y CONFIG_RTC_LIB=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_SCSI_WAIT_SCAN is not set # CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_8250_EXTENDED is not set # CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_NR_UARTS=1 CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1 CONFIG_SERIAL_8250_RUNTIME_UARTS=1
@ -211,9 +196,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=1
# CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_SWARM is not set
CONFIG_SND_MIPS=y
# CONFIG_SOFT_WATCHDOG is not set # CONFIG_SOFT_WATCHDOG is not set
CONFIG_SOUND_OSS_CORE=y
CONFIG_SSB_POSSIBLE=y CONFIG_SSB_POSSIBLE=y
CONFIG_SYSVIPC_SYSCTL=y CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y CONFIG_SYS_HAS_CPU_MIPS32_R1=y
@ -222,14 +205,6 @@ CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_TICK_ONESHOT=y CONFIG_TICK_ONESHOT=y
CONFIG_TRAD_SIGNALS=y CONFIG_TRAD_SIGNALS=y
# CONFIG_USB is not set
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_SUPPORT=y CONFIG_USB_SUPPORT=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_WDM is not set
# CONFIG_VGASTATE is not set # CONFIG_VGASTATE is not set
# CONFIG_VIDEO_MEDIA is not set
# CONFIG_VIDEO_V4L2 is not set
# CONFIG_VIDEO_V4L2_COMMON is not set
CONFIG_ZONE_DMA_FLAG=0 CONFIG_ZONE_DMA_FLAG=0

27
target/linux/atheros/files-2.6.28/arch/mips/atheros/Kconfig
View File

@ -1,27 +0,0 @@
config ATHEROS_AR5312
bool "Atheros 5312/2312+ support"
depends on ATHEROS
default y
config ATHEROS_AR5315
bool "Atheros 5315/2315+ support"
depends on ATHEROS
select DMA_NONCOHERENT
select CEVT_R4K
select CSRC_R4K
select IRQ_CPU
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select GENERIC_GPIO
default y
config ATHEROS_AR5315_PCI
bool "PCI support"
select HW_HAS_PCI
select PCI
select USB_ARCH_HAS_HCD
select USB_ARCH_HAS_OHCI
select USB_ARCH_HAS_EHCI
depends on ATHEROS_AR5315
default n

13
target/linux/atheros/files-2.6.28/arch/mips/atheros/Makefile
View File

@ -1,13 +0,0 @@
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 2006 FON Technology, SL.
# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
# Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
#
obj-y += board.o prom.o reset.o
obj-$(CONFIG_ATHEROS_AR5312) += ar5312/
obj-$(CONFIG_ATHEROS_AR5315) += ar5315/

11
target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/Makefile
View File

@ -1,11 +0,0 @@
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 2007 FON Technology, SL.
# Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
# Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
#
obj-y := board.o irq.o

473
target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/board.c
View File

@ -1,473 +0,0 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
* Copyright (C) 2006 FON Technology, SL.
* Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
* Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
*/
/*
* Platform devices for Atheros SoCs
*/
#include <linux/autoconf.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <asm/bootinfo.h>
#include <asm/reboot.h>
#include <asm/time.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <ar531x.h>
#include <linux/leds.h>
#define NO_PHY 0x1f
static int is_5312 = 0;
static struct platform_device *ar5312_devs[6];
static struct resource ar5312_eth0_res[] = {
{
.name = "eth0_membase",
.flags = IORESOURCE_MEM,
.start = KSEG1ADDR(AR531X_ENET0),
.end = KSEG1ADDR(AR531X_ENET0 + 0x2000),
},
{
.name = "eth0_irq",
.flags = IORESOURCE_IRQ,
.start = AR5312_IRQ_ENET0_INTRS,
.end = AR5312_IRQ_ENET0_INTRS,
},
};
static struct ar531x_eth ar5312_eth0_data = {
.phy = NO_PHY,
.mac = 0,
.reset_base = AR531X_RESET,
.reset_mac = AR531X_RESET_ENET0,
.reset_phy = AR531X_RESET_EPHY0,
.phy_base = KSEG1ADDR(AR531X_ENET0),
};
static struct resource ar5312_eth1_res[] = {
{
.name = "eth1_membase",
.flags = IORESOURCE_MEM,
.start = KSEG1ADDR(AR531X_ENET1),
.end = KSEG1ADDR(AR531X_ENET1 + 0x2000),
},
{
.name = "eth1_irq",
.flags = IORESOURCE_IRQ,
.start = AR5312_IRQ_ENET1_INTRS,
.end = AR5312_IRQ_ENET1_INTRS,
},
};
static struct ar531x_eth ar5312_eth1_data = {
.phy = NO_PHY,
.mac = 1,
.reset_base = AR531X_RESET,
.reset_mac = AR531X_RESET_ENET1,
.reset_phy = AR531X_RESET_EPHY1,
.phy_base = KSEG1ADDR(AR531X_ENET1),
};
static struct platform_device ar5312_eth[] = {
{
.id = 0,
.name = "ar531x-eth",
.dev.platform_data = &ar5312_eth0_data,
.resource = ar5312_eth0_res,
.num_resources = ARRAY_SIZE(ar5312_eth0_res)
},
{
.id = 1,
.name = "ar531x-eth",
.dev.platform_data = &ar5312_eth1_data,
.resource = ar5312_eth1_res,
.num_resources = ARRAY_SIZE(ar5312_eth1_res)
},
};
/*
* AR2312/3 ethernet uses the PHY of ENET0, but the MAC
* of ENET1. Atheros calls it 'twisted' for a reason :)
*/
static struct resource ar231x_eth0_res[] = {
{
.name = "eth0_membase",
.flags = IORESOURCE_MEM,
.start = KSEG1ADDR(AR531X_ENET1),
.end = KSEG1ADDR(AR531X_ENET1 + 0x2000),
},
{
.name = "eth0_irq",
.flags = IORESOURCE_IRQ,
.start = AR5312_IRQ_ENET1_INTRS,
.end = AR5312_IRQ_ENET1_INTRS,
},
};
static struct ar531x_eth ar231x_eth0_data = {
.phy = 1,
.mac = 1,
.reset_base = AR531X_RESET,
.reset_mac = AR531X_RESET_ENET1,
.reset_phy = AR531X_RESET_EPHY1,
.phy_base = KSEG1ADDR(AR531X_ENET0),
};
static struct platform_device ar231x_eth0 = {
.id = 0,
.name = "ar531x-eth",
.dev.platform_data = &ar231x_eth0_data,
.resource = ar231x_eth0_res,
.num_resources = ARRAY_SIZE(ar231x_eth0_res)
};
static struct platform_device ar5312_wmac[] = {
{
.id = 0,
.name = "ar531x-wmac",
},
{
.id = 1,
.name = "ar531x-wmac",
},
};
static struct physmap_flash_data ar5312_flash_data = {
.width = 2,
};
static struct resource ar5312_flash_resource = {
.start = AR531X_FLASH,
.end = AR531X_FLASH + 0x800000 - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device ar5312_physmap_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &ar5312_flash_data,
},
.num_resources = 1,
.resource = &ar5312_flash_resource,
};
#ifdef CONFIG_LEDS_GPIO
static struct gpio_led ar5312_leds[] = {
{ .name = "wlan", .gpio = 0, .active_low = 1, },
};
static const struct gpio_led_platform_data ar5312_led_data = {
.num_leds = ARRAY_SIZE(ar5312_leds),
.leds = (void *) ar5312_leds,
};
static struct platform_device ar5312_gpio_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = (void *) &ar5312_led_data,
}
};
#endif
/*
* NB: This mapping size is larger than the actual flash size,
* but this shouldn't be a problem here, because the flash
* will simply be mapped multiple times.
*/
static char __init *ar5312_flash_limit(void)
{
u32 ctl;
/*
* Configure flash bank 0.
* Assume 8M window size. Flash will be aliased if it's smaller
*/
ctl = FLASHCTL_E |
FLASHCTL_AC_8M |
FLASHCTL_RBLE |
(0x01 << FLASHCTL_IDCY_S) |
(0x07 << FLASHCTL_WST1_S) |
(0x07 << FLASHCTL_WST2_S) |
(sysRegRead(AR531X_FLASHCTL0) & FLASHCTL_MW);
sysRegWrite(AR531X_FLASHCTL0, ctl);
/* Disable other flash banks */
sysRegWrite(AR531X_FLASHCTL1,
sysRegRead(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC));
sysRegWrite(AR531X_FLASHCTL2,
sysRegRead(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC));
return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000);
}
static struct ar531x_config __init *init_wmac(int unit)
{
struct ar531x_config *config;
config = (struct ar531x_config *) kzalloc(sizeof(struct ar531x_config), GFP_KERNEL);
config->board = board_config;
config->radio = radio_config;
config->unit = unit;
config->tag = (u_int16_t) ((sysRegRead(AR531X_REV) >> AR531X_REV_WMAC_MIN_S) & AR531X_REV_CHIP);
return config;
}
int __init ar5312_init_devices(void)
{
struct ar531x_boarddata *bcfg;
char *radio, *c;
int dev = 0;
uint32_t fctl = 0;
if (!is_5312)
return 0;
/* Locate board/radio config data */
ar531x_find_config(ar5312_flash_limit());
bcfg = (struct ar531x_boarddata *) board_config;
/*
* Chip IDs and hardware detection for some Atheros
* models are really broken!
*
* Atheros uses a disabled WMAC0 and Silicon ID of AR5312
* as indication for AR2312, which is otherwise
* indistinguishable from the real AR5312.
*/
if (radio_config) {
radio = radio_config + AR531X_RADIO_MASK_OFF;
if ((*((u32 *) radio) & AR531X_RADIO0_MASK) == 0)
bcfg->config |= BD_ISCASPER;
} else
radio = NULL;
/* AR2313 has CPU minor rev. 10 */
if ((current_cpu_data.processor_id & 0xff) == 0x0a)
mips_machtype = MACH_ATHEROS_AR2313;
/* AR2312 shares the same Silicon ID as AR5312 */
else if (bcfg->config & BD_ISCASPER)
mips_machtype = MACH_ATHEROS_AR2312;
/* Everything else is probably AR5312 or compatible */
else
mips_machtype = MACH_ATHEROS_AR5312;
ar5312_eth0_data.board_config = board_config;
ar5312_eth1_data.board_config = board_config;
/* fixup flash width */
fctl = sysRegRead(AR531X_FLASHCTL) & FLASHCTL_MW;
switch (fctl) {
case FLASHCTL_MWx16:
ar5312_flash_data.width = 2;
break;
case FLASHCTL_MWx8:
default:
ar5312_flash_data.width = 1;
break;
}
ar5312_devs[dev++] = &ar5312_physmap_flash;
#ifdef CONFIG_LEDS_GPIO
ar5312_leds[0].gpio = bcfg->sysLedGpio;
ar5312_devs[dev++] = &ar5312_gpio_leds;
#endif
if (!memcmp(bcfg->enet0Mac, "\xff\xff\xff\xff\xff\xff", 6))
memcpy(bcfg->enet0Mac, bcfg->enet1Mac, 6);
if (memcmp(bcfg->enet0Mac, bcfg->enet1Mac, 6) == 0) {
/* ENET0 and ENET1 have the same mac.
* Increment the one from ENET1 */
c = bcfg->enet1Mac + 5;
while ((c >= (char *) bcfg->enet1Mac) && !(++(*c)))
c--;
}
switch(mips_machtype) {
case MACH_ATHEROS_AR5312:
ar5312_eth0_data.macaddr = bcfg->enet0Mac;
ar5312_eth1_data.macaddr = bcfg->enet1Mac;
ar5312_devs[dev++] = &ar5312_eth[0];
ar5312_devs[dev++] = &ar5312_eth[1];
break;
case MACH_ATHEROS_AR2312:
case MACH_ATHEROS_AR2313:
ar231x_eth0_data.macaddr = bcfg->enet0Mac;
ar5312_devs[dev++] = &ar231x_eth0;
ar5312_flash_data.width = 1;
break;
}
if (radio) {
if (mips_machtype == MACH_ATHEROS_AR5312) {
if (*((u32 *) radio) & AR531X_RADIO0_MASK) {
ar5312_wmac[0].dev.platform_data = init_wmac(0);
ar5312_devs[dev++] = &ar5312_wmac[0];
}
}
if (*((u32 *) radio) & AR531X_RADIO1_MASK) {
ar5312_wmac[1].dev.platform_data = init_wmac(1);
ar5312_devs[dev++] = &ar5312_wmac[1];
}
}
return platform_add_devices(ar5312_devs, dev);
}
static void ar5312_halt(void)
{
while (1);
}
static void ar5312_power_off(void)
{
ar5312_halt();
}
static void ar5312_restart(char *command)
{
/* reset the system */
for(;;) sysRegWrite(AR531X_RESET, AR531X_RESET_SYSTEM);
}
/*
* This table is indexed by bits 5..4 of the CLOCKCTL1 register
* to determine the predevisor value.
*/
static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = {
1,
2,
4,
5
};
static unsigned int __init ar5312_cpu_frequency(void)
{
unsigned int result;
unsigned int predivide_mask, predivide_shift;
unsigned int multiplier_mask, multiplier_shift;
unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier;
unsigned int doubler_mask;
unsigned int wisoc_revision;
/* Trust the bootrom's idea of cpu frequency. */
if ((result = sysRegRead(AR5312_SCRATCH)))
return result;
wisoc_revision = (sysRegRead(AR531X_REV) & AR531X_REV_MAJ) >> AR531X_REV_MAJ_S;
if (wisoc_revision == AR531X_REV_MAJ_AR2313) {
predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
} else { /* AR5312 and AR2312 */
predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
}
/*
* Clocking is derived from a fixed 40MHz input clock.
*
* cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
* sysFreq = cpuFreq / 4 (used for APB clock, serial,
* flash, Timer, Watchdog Timer)
*
* cntFreq = cpuFreq / 2 (use for CPU count/compare)
*
* So, for example, with a PLL multiplier of 5, we have
*
* cpuFreq = 200MHz
* sysFreq = 50MHz
* cntFreq = 100MHz
*
* We compute the CPU frequency, based on PLL settings.
*/
clockCtl1 = sysRegRead(AR5312_CLOCKCTL1);
preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift;
preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift;
if (clockCtl1 & doubler_mask) {
multiplier = multiplier << 1;
}
return (40000000 / preDivisor) * multiplier;
}
static inline int ar5312_sys_frequency(void)
{
return ar5312_cpu_frequency() / 4;
}
static void __init ar5312_time_init(void)
{
mips_hpt_frequency = ar5312_cpu_frequency() / 2;
}
void __init ar5312_prom_init(void)
{
u32 memsize, memcfg, bank0AC, bank1AC;
is_5312 = 1;
/* Detect memory size */
memcfg = sysRegRead(AR531X_MEM_CFG1);
bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
memsize = (bank0AC ? (1 << (bank0AC+1)) : 0)
+ (bank1AC ? (1 << (bank1AC+1)) : 0);
memsize <<= 20;
add_memory_region(0, memsize, BOOT_MEM_RAM);
/* Initialize it to AR5312 for now. Real detection will be done
* in ar5312_init_devices() */
mips_machtype = MACH_ATHEROS_AR5312;
}
void __init ar5312_plat_setup(void)
{
/* Clear any lingering AHB errors */
sysRegRead(AR531X_PROCADDR);
sysRegRead(AR531X_DMAADDR);
sysRegWrite(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
board_time_init = ar5312_time_init;
_machine_restart = ar5312_restart;
_machine_halt = ar5312_halt;
pm_power_off = ar5312_power_off;
serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency());
}
arch_initcall(ar5312_init_devices);

174
target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/irq.c
View File

@ -1,174 +0,0 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
* Copyright (C) 2006 FON Technology, SL.
* Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
* Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
*/
/*
* Platform devices for Atheros SoCs
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <ar531x.h>
#include <gpio.h>
/*
* Called when an interrupt is received, this function
* determines exactly which interrupt it was, and it
* invokes the appropriate handler.
*
* Implicitly, we also define interrupt priority by
* choosing which to dispatch first.
*/
asmlinkage void ar5312_irq_dispatch(void)
{
int pending = read_c0_status() & read_c0_cause();
if (pending & CAUSEF_IP2)
do_IRQ(AR5312_IRQ_WLAN0_INTRS);
else if (pending & CAUSEF_IP3)
do_IRQ(AR5312_IRQ_ENET0_INTRS);
else if (pending & CAUSEF_IP4)
do_IRQ(AR5312_IRQ_ENET1_INTRS);
else if (pending & CAUSEF_IP5)
do_IRQ(AR5312_IRQ_WLAN1_INTRS);
else if (pending & CAUSEF_IP6) {
unsigned int ar531x_misc_intrs = sysRegRead(AR531X_ISR) & sysRegRead(AR531X_IMR);
if (ar531x_misc_intrs & AR531X_ISR_TIMER) {
do_IRQ(AR531X_MISC_IRQ_TIMER);
(void)sysRegRead(AR531X_TIMER);
} else if (ar531x_misc_intrs & AR531X_ISR_AHBPROC)
do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
else if ((ar531x_misc_intrs & AR531X_ISR_UART0))
do_IRQ(AR531X_MISC_IRQ_UART0);
else if (ar531x_misc_intrs & AR531X_ISR_WD)
do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
else
do_IRQ(AR531X_MISC_IRQ_NONE);
} else if (pending & CAUSEF_IP7) {
do_IRQ(AR531X_IRQ_CPU_CLOCK);
}
}
/* Enable the specified AR531X_MISC_IRQ interrupt */
static void
ar5312_misc_intr_enable(unsigned int irq)
{
unsigned int imr;
imr = sysRegRead(AR531X_IMR);
imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1));
sysRegWrite(AR531X_IMR, imr);
sysRegRead(AR531X_IMR); /* flush write buffer */
}
/* Disable the specified AR531X_MISC_IRQ interrupt */
static void
ar5312_misc_intr_disable(unsigned int irq)
{
unsigned int imr;
imr = sysRegRead(AR531X_IMR);
imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1));
sysRegWrite(AR531X_IMR, imr);
sysRegRead(AR531X_IMR); /* flush write buffer */
}
/* Turn on the specified AR531X_MISC_IRQ interrupt */
static unsigned int
ar5312_misc_intr_startup(unsigned int irq)
{
ar5312_misc_intr_enable(irq);
return 0;
}
/* Turn off the specified AR531X_MISC_IRQ interrupt */
static void
ar5312_misc_intr_shutdown(unsigned int irq)
{
ar5312_misc_intr_disable(irq);
}
static void
ar5312_misc_intr_ack(unsigned int irq)
{
ar5312_misc_intr_disable(irq);
}
static void
ar5312_misc_intr_end(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
ar5312_misc_intr_enable(irq);
}
static struct irq_chip ar5312_misc_intr_controller = {
.typename = "AR5312 misc",
.startup = ar5312_misc_intr_startup,
.shutdown = ar5312_misc_intr_shutdown,
.enable = ar5312_misc_intr_enable,
.disable = ar5312_misc_intr_disable,
.ack = ar5312_misc_intr_ack,
.end = ar5312_misc_intr_end,
};
static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id)
{
u32 proc1 = sysRegRead(AR531X_PROC1);
u32 procAddr = sysRegRead(AR531X_PROCADDR); /* clears error state */
u32 dma1 = sysRegRead(AR531X_DMA1);
u32 dmaAddr = sysRegRead(AR531X_DMAADDR); /* clears error state */
printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n",
procAddr, proc1, dmaAddr, dma1);
machine_restart("AHB error"); /* Catastrophic failure */
return IRQ_HANDLED;
}
static struct irqaction ar5312_ahb_proc_interrupt = {
.handler = ar5312_ahb_proc_handler,
.flags = IRQF_DISABLED,
.name = "ar5312_ahb_proc_interrupt",
};
static struct irqaction cascade = {
.handler = no_action,
.flags = IRQF_DISABLED,
.name = "cascade",
};
void __init ar5312_misc_intr_init(int irq_base)
{
int i;
for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = NULL;
irq_desc[i].depth = 1;
irq_desc[i].chip = &ar5312_misc_intr_controller;
}
setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt);
setup_irq(AR5312_IRQ_MISC_INTRS, &cascade);
}

12
target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/Makefile
View File

@ -1,12 +0,0 @@
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 2007 FON Technology, SL.
# Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
# Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
#
obj-y := board.o irq.o
obj-$(CONFIG_ATHEROS_AR5315_PCI) += pci.o

414
target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/board.c
View File

@ -1,414 +0,0 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
* Copyright (C) 2006 FON Technology, SL.
* Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
* Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
*/
/*
* Platform devices for Atheros SoCs
*/
#include <linux/autoconf.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#include <asm/bootinfo.h>
#include <asm/reboot.h>
#include <asm/time.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <ar531x.h>
#include <linux/leds.h>
#include <asm/gpio.h>
static int is_5315 = 0;
static struct resource ar5315_eth_res[] = {
{
.name = "eth0_membase",
.flags = IORESOURCE_MEM,
.start = AR5315_ENET0,
.end = AR5315_ENET0 + 0x2000,
},
{
.name = "eth0_irq",
.flags = IORESOURCE_IRQ,
.start = AR5315_IRQ_ENET0_INTRS,
.end = AR5315_IRQ_ENET0_INTRS,
},
};
static struct ar531x_eth ar5315_eth_data = {
.phy = 1,
.mac = 0,
.reset_base = AR5315_RESET,
.reset_mac = AR5315_RESET_ENET0,
.reset_phy = AR5315_RESET_EPHY0,
.phy_base = AR5315_ENET0
};
static struct platform_device ar5315_eth = {
.id = 0,
.name = "ar531x-eth",
.dev.platform_data = &ar5315_eth_data,
.resource = ar5315_eth_res,
.num_resources = ARRAY_SIZE(ar5315_eth_res)
};
static struct platform_device ar5315_wmac = {
.id = 0,
.name = "ar531x-wmac",
/* FIXME: add resources */
};
static struct resource ar5315_spiflash_res[] = {
{
.name = "flash_base",
.flags = IORESOURCE_MEM,
.start = KSEG1ADDR(AR5315_SPI_READ),
.end = KSEG1ADDR(AR5315_SPI_READ) + 0x800000,
},
{
.name = "flash_regs",
.flags = IORESOURCE_MEM,
.start = 0x11300000,
.end = 0x11300012,
},
};
static struct platform_device ar5315_spiflash = {
.id = 0,
.name = "spiflash",
.resource = ar5315_spiflash_res,
.num_resources = ARRAY_SIZE(ar5315_spiflash_res)
};
#ifdef CONFIG_LEDS_GPIO
static struct gpio_led ar5315_leds[8];
static struct gpio_led_platform_data ar5315_led_data = {
.num_leds = ARRAY_SIZE(ar5315_leds),
.leds = (void *) ar5315_leds,
};
static struct platform_device ar5315_gpio_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = (void *) &ar5315_led_data,
}
};
#endif
static struct platform_device ar5315_wdt =
{
.id = 0,
.name = "ar2315_wdt",
};
static __initdata struct platform_device *ar5315_devs[6];
static void *flash_regs;
static inline __u32 spiflash_regread32(int reg)
{
volatile __u32 *data = (__u32 *)(flash_regs + reg);
return (*data);
}
static inline void spiflash_regwrite32(int reg, __u32 data)
{
volatile __u32 *addr = (__u32 *)(flash_regs + reg);
*addr = data;
}
#define SPI_FLASH_CTL 0x00
#define SPI_FLASH_OPCODE 0x04
#define SPI_FLASH_DATA 0x08
static __u8 spiflash_probe(void)
{
__u32 reg;
do {
reg = spiflash_regread32(SPI_FLASH_CTL);
} while (reg & SPI_CTL_BUSY);
spiflash_regwrite32(SPI_FLASH_OPCODE, 0xab);
reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | 4 |
(1 << 4) | SPI_CTL_START;
spiflash_regwrite32(SPI_FLASH_CTL, reg);
do {
reg = spiflash_regread32(SPI_FLASH_CTL);
} while (reg & SPI_CTL_BUSY);
reg = (__u32) spiflash_regread32(SPI_FLASH_DATA);
reg &= 0xff;
return (u8) reg;
}
#define STM_8MBIT_SIGNATURE 0x13
#define STM_16MBIT_SIGNATURE 0x14
#define STM_32MBIT_SIGNATURE 0x15
#define STM_64MBIT_SIGNATURE 0x16
#define STM_128MBIT_SIGNATURE 0x17
static char __init *ar5315_flash_limit(void)
{
u8 sig;
u32 flash_size = 0;
/* probe the flash chip size */
flash_regs = ioremap_nocache(ar5315_spiflash_res[1].start, ar5315_spiflash_res[1].end - ar5315_spiflash_res[1].start);
sig = spiflash_probe();
iounmap(flash_regs);
switch(sig) {
case STM_8MBIT_SIGNATURE:
flash_size = 0x00100000;
break;
case STM_16MBIT_SIGNATURE:
flash_size = 0x00200000;
break;
case STM_32MBIT_SIGNATURE:
flash_size = 0x00400000;
break;
case STM_64MBIT_SIGNATURE:
flash_size = 0x00800000;
break;
case STM_128MBIT_SIGNATURE:
flash_size = 0x01000000;
break;
}
ar5315_spiflash_res[0].end = ar5315_spiflash_res[0].start + flash_size;
return (char *) ar5315_spiflash_res[0].end;
}
int __init ar5315_init_devices(void)
{
struct ar531x_config *config;
struct ar531x_boarddata *bcfg;
int dev = 0;
#ifdef CONFIG_LEDS_GPIO
int i;
char *tmp;
#endif
if (!is_5315)
return 0;
/* Find board configuration */
ar531x_find_config(ar5315_flash_limit());
bcfg = (struct ar531x_boarddata *) board_config;
config = (struct ar531x_config *) kzalloc(sizeof(struct ar531x_config), GFP_KERNEL);
config->board = board_config;
config->radio = radio_config;
config->unit = 0;
config->tag = (u_int16_t) (sysRegRead(AR5315_SREV) & AR5315_REV_CHIP);
ar5315_eth_data.board_config = board_config;
ar5315_eth_data.macaddr = bcfg->enet0Mac;
ar5315_wmac.dev.platform_data = config;
ar5315_devs[dev++] = &ar5315_eth;
ar5315_devs[dev++] = &ar5315_wmac;
ar5315_devs[dev++] = &ar5315_spiflash;
ar5315_devs[dev++] = &ar5315_wdt;
#ifdef CONFIG_LEDS_GPIO
ar5315_led_data.num_leds = 0;
for(i = 1; i < 8; i++)
{
if((i != AR5315_RESET_GPIO) && (i != bcfg->resetConfigGpio))
{
if(i == bcfg->sysLedGpio)
{
tmp = kstrdup("wlan", GFP_KERNEL);
} else {
tmp = kmalloc(6, GFP_KERNEL);
if(tmp)
sprintf((char*)tmp, "gpio%d", i);
}
if(tmp)
{
ar5315_leds[ar5315_led_data.num_leds].name = tmp;
ar5315_leds[ar5315_led_data.num_leds].gpio = i;
ar5315_leds[ar5315_led_data.num_leds].active_low = 0;
ar5315_led_data.num_leds++;
} else {
printk("failed to alloc led string\n");
continue;
}
}
}
ar5315_devs[dev++] = &ar5315_gpio_leds;
#endif
return platform_add_devices(ar5315_devs, dev);
}
static void ar5315_halt(void)
{
while (1);
}
static void ar5315_power_off(void)
{
ar5315_halt();
}
static void ar5315_restart(char *command)
{
void (*mips_reset_vec)(void) = (void *) 0xbfc00000;
/* reset the system */
sysRegWrite(AR5315_COLD_RESET,AR5317_RESET_SYSTEM);
/* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround.
* give it some time to attempt a gpio based hardware reset
* (atheros reference design workaround) */
gpio_direction_output(AR5315_RESET_GPIO, 0);
mdelay(100);
/* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
* workaround. Attempt to jump to the mips reset location -
* the boot loader itself might be able to recover the system */
mips_reset_vec();
}
/*
* This table is indexed by bits 5..4 of the CLOCKCTL1 register
* to determine the predevisor value.
*/
static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = {
1,
2,
4,
5
};
static int __initdata PLLC_DIVIDE_TABLE[5] = {
2,
3,
4,
6,
3
};
static unsigned int __init
ar5315_sys_clk(unsigned int clockCtl)
{
unsigned int pllcCtrl,cpuDiv;
unsigned int pllcOut,refdiv,fdiv,divby2;
unsigned int clkDiv;
pllcCtrl = sysRegRead(AR5315_PLLC_CTL);
refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S;
refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv];
fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S;
divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S;
divby2 += 1;
pllcOut = (40000000/refdiv)*(2*divby2)*fdiv;
/* clkm input selected */
switch(clockCtl & CPUCLK_CLK_SEL_M) {
case 0:
case 1:
clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S];
break;
case 2:
clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S];
break;
default:
pllcOut = 40000000;
clkDiv = 1;
break;
}
cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;
cpuDiv = cpuDiv * 2 ?: 1;
return (pllcOut/(clkDiv * cpuDiv));
}
static inline unsigned int ar5315_cpu_frequency(void)
{
return ar5315_sys_clk(sysRegRead(AR5315_CPUCLK));
}
static inline unsigned int ar5315_apb_frequency(void)
{
return ar5315_sys_clk(sysRegRead(AR5315_AMBACLK));
}
static void __init ar5315_time_init(void)
{
mips_hpt_frequency = ar5315_cpu_frequency() / 2;
}
void __init ar5315_prom_init(void)
{
u32 memsize, memcfg, devid;
is_5315 = 1;
memcfg = sysRegRead(AR5315_MEM_CFG);
memsize = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S);
memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S);
memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S);
memsize <<= 3;
add_memory_region(0, memsize, BOOT_MEM_RAM);
/* Detect the hardware based on the device ID */
devid = sysRegRead(AR5315_SREV) & AR5315_REV_CHIP;
switch(devid) {
case 0x90:
case 0x91:
mips_machtype = MACH_ATHEROS_AR2317;
break;
default:
mips_machtype = MACH_ATHEROS_AR2315;
break;
}
}
void __init ar5315_plat_setup(void)
{
unsigned int config = read_c0_config();
/* Clear any lingering AHB errors */
write_c0_config(config & ~0x3);
sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET);
sysRegRead(AR5315_AHB_ERR1);
sysRegWrite(AR5315_WDC, WDC_IGNORE_EXPIRATION);
board_time_init = ar5315_time_init;
_machine_restart = ar5315_restart;
_machine_halt = ar5315_halt;
pm_power_off = ar5315_power_off;
serial_setup(KSEG1ADDR(AR5315_UART0), ar5315_apb_frequency());
}
arch_initcall(ar5315_init_devices);

359
target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/irq.c
View File

@ -1,359 +0,0 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
* Copyright (C) 2006 FON Technology, SL.
* Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
* Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
*/
/*
* Platform devices for Atheros SoCs
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/interrupt.h>
#include <linux/bitops.h>
#include <asm/bootinfo.h>
#include <asm/irq_cpu.h>
#include <asm/io.h>
#include <ar531x.h>
#include <gpio.h>
static u32 gpiointmask = 0, gpiointval = 0;
static inline void ar5315_gpio_irq(void)
{
u32 pend;
sysRegWrite(AR5315_ISR, sysRegRead(AR5315_IMR) | ~AR5315_ISR_GPIO);
/* only do one gpio interrupt at a time */
pend = (sysRegRead(AR5315_GPIO_DI) ^ gpiointval) & gpiointmask;
if (!pend)
return;
do_IRQ(AR531X_GPIO_IRQ_BASE + fls(pend) - 1);
}
/*
* Called when an interrupt is received, this function
* determines exactly which interrupt it was, and it
* invokes the appropriate handler.
*
* Implicitly, we also define interrupt priority by
* choosing which to dispatch first.
*/
asmlinkage void ar5315_irq_dispatch(void)
{
int pending = read_c0_status() & read_c0_cause();
if (pending & CAUSEF_IP3)
do_IRQ(AR5315_IRQ_WLAN0_INTRS);
else if (pending & CAUSEF_IP4)
do_IRQ(AR5315_IRQ_ENET0_INTRS);
#ifdef CONFIG_PCI
else if (pending & CAUSEF_IP5)
ar5315_pci_irq(AR5315_IRQ_LCBUS_PCI);
#endif
else if (pending & CAUSEF_IP2) {
unsigned int ar531x_misc_intrs = sysRegRead(AR5315_ISR) & sysRegRead(AR5315_IMR);
if (ar531x_misc_intrs & AR5315_ISR_SPI)
do_IRQ(AR531X_MISC_IRQ_SPI);
else if (ar531x_misc_intrs & AR5315_ISR_TIMER)
do_IRQ(AR531X_MISC_IRQ_TIMER);
else if (ar531x_misc_intrs & AR5315_ISR_AHB)
do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
else if (ar531x_misc_intrs & AR5315_ISR_GPIO)
ar5315_gpio_irq();
else if (ar531x_misc_intrs & AR5315_ISR_UART0)
do_IRQ(AR531X_MISC_IRQ_UART0);
else if (ar531x_misc_intrs & AR5315_ISR_WD)
do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
else
do_IRQ(AR531X_MISC_IRQ_NONE);
} else if (pending & CAUSEF_IP7)
do_IRQ(AR531X_IRQ_CPU_CLOCK);
}
#ifdef CONFIG_PCI
static inline void pci_abort_irq(void)
{
sysRegWrite(AR5315_PCI_INT_STATUS, AR5315_PCI_ABORT_INT);
(void)sysRegRead(AR5315_PCI_INT_STATUS); /* flush write to hardware */
}
static inline void pci_ack_irq(void)
{
sysRegWrite(AR5315_PCI_INT_STATUS, AR5315_PCI_EXT_INT);
(void)sysRegRead(AR5315_PCI_INT_STATUS); /* flush write to hardware */
}
void ar5315_pci_irq(int irq)
{
if (sysRegRead(AR5315_PCI_INT_STATUS) == AR5315_PCI_ABORT_INT)
pci_abort_irq();
else {
do_IRQ(irq);
pci_ack_irq();
}
}
#endif
static void ar5315_gpio_intr_enable(unsigned int irq)
{
u32 gpio, mask;
gpio = irq - AR531X_GPIO_IRQ_BASE;
mask = 1 << gpio;
gpiointmask |= mask;
/* reconfigure GPIO line as input */
sysRegMask(AR5315_GPIO_CR, AR5315_GPIO_CR_M(gpio), AR5315_GPIO_CR_I(gpio));
/* Enable interrupt with edge detection */
sysRegMask(AR5315_GPIO_INT, AR5315_GPIO_INT_M | AR5315_GPIO_INT_LVL_M, gpio | AR5315_GPIO_INT_LVL(3));
}
static void ar5315_gpio_intr_disable(unsigned int irq)
{
u32 gpio, mask;
gpio = irq - AR531X_GPIO_IRQ_BASE;
mask = 1 << gpio;
gpiointmask &= ~mask;
/* Disable interrupt with edge detection */
sysRegMask(AR5315_GPIO_INT, AR5315_GPIO_INT_M | AR5315_GPIO_INT_LVL_M, gpio | AR5315_GPIO_INT_LVL(0));
}
/* Turn on the specified AR531X_MISC_IRQ interrupt */
static unsigned int ar5315_gpio_intr_startup(unsigned int irq)
{
ar5315_gpio_intr_enable(irq);
return 0;
}
/* Turn off the specified AR531X_MISC_IRQ interrupt */
static void
ar5315_gpio_intr_shutdown(unsigned int irq)
{
ar5315_gpio_intr_disable(irq);
}
static void
ar5315_gpio_intr_ack(unsigned int irq)
{
ar5315_gpio_intr_disable(irq);
}
static void
ar5315_gpio_intr_end(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
ar5315_gpio_intr_enable(irq);
}
static struct irq_chip ar5315_gpio_intr_controller = {
.typename = "AR5315 GPIO",
.startup = ar5315_gpio_intr_startup,
.shutdown = ar5315_gpio_intr_shutdown,
.enable = ar5315_gpio_intr_enable,
.disable = ar5315_gpio_intr_disable,
.ack = ar5315_gpio_intr_ack,
.end = ar5315_gpio_intr_end,
};
/* Enable the specified AR531X_MISC_IRQ interrupt */
static void
ar5315_misc_intr_enable(unsigned int irq)
{
unsigned int imr;
imr = sysRegRead(AR5315_IMR);
switch(irq)
{
case AR531X_MISC_IRQ_SPI:
imr |= AR5315_ISR_SPI;
break;
case AR531X_MISC_IRQ_TIMER:
imr |= AR5315_ISR_TIMER;
break;
case AR531X_MISC_IRQ_AHB_PROC:
imr |= AR5315_ISR_AHB;
break;
case AR531X_MISC_IRQ_AHB_DMA:
imr |= 0/* ?? */;
break;
case AR531X_MISC_IRQ_GPIO:
imr |= AR5315_ISR_GPIO;
break;
case AR531X_MISC_IRQ_UART0:
imr |= AR5315_ISR_UART0;
break;
case AR531X_MISC_IRQ_WATCHDOG:
imr |= AR5315_ISR_WD;
break;
case AR531X_MISC_IRQ_LOCAL:
imr |= 0/* ?? */;
break;
}
sysRegWrite(AR5315_IMR, imr);
imr=sysRegRead(AR5315_IMR); /* flush write buffer */
}
/* Disable the specified AR531X_MISC_IRQ interrupt */
static void
ar5315_misc_intr_disable(unsigned int irq)
{
unsigned int imr;
imr = sysRegRead(AR5315_IMR);
switch(irq)
{
case AR531X_MISC_IRQ_SPI:
imr &= ~AR5315_ISR_SPI;
break;
case AR531X_MISC_IRQ_TIMER:
imr &= (~AR5315_ISR_TIMER);
break;
case AR531X_MISC_IRQ_AHB_PROC:
imr &= (~AR5315_ISR_AHB);
break;
case AR531X_MISC_IRQ_AHB_DMA:
imr &= 0/* ?? */;
break;
case AR531X_MISC_IRQ_GPIO:
imr &= ~AR5315_ISR_GPIO;
break;
case AR531X_MISC_IRQ_UART0:
imr &= (~AR5315_ISR_UART0);
break;
case AR531X_MISC_IRQ_WATCHDOG:
imr &= (~AR5315_ISR_WD);
break;
case AR531X_MISC_IRQ_LOCAL:
imr &= ~0/* ?? */;
break;
}
sysRegWrite(AR5315_IMR, imr);
sysRegRead(AR5315_IMR); /* flush write buffer */
}
/* Turn on the specified AR531X_MISC_IRQ interrupt */
static unsigned int
ar5315_misc_intr_startup(unsigned int irq)
{
ar5315_misc_intr_enable(irq);
return 0;
}
/* Turn off the specified AR531X_MISC_IRQ interrupt */
static void
ar5315_misc_intr_shutdown(unsigned int irq)
{
ar5315_misc_intr_disable(irq);
}
static void
ar5315_misc_intr_ack(unsigned int irq)
{
ar5315_misc_intr_disable(irq);
}
static void
ar5315_misc_intr_end(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
ar5315_misc_intr_enable(irq);
}
static struct irq_chip ar5315_misc_intr_controller = {
.typename = "AR5315 misc",
.startup = ar5315_misc_intr_startup,
.shutdown = ar5315_misc_intr_shutdown,
.enable = ar5315_misc_intr_enable,
.disable = ar5315_misc_intr_disable,
.ack = ar5315_misc_intr_ack,
.end = ar5315_misc_intr_end,
};
static irqreturn_t ar5315_ahb_proc_handler(int cpl, void *dev_id)
{
sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET);
sysRegRead(AR5315_AHB_ERR1);
printk("AHB fatal error\n");
machine_restart("AHB error"); /* Catastrophic failure */
return IRQ_HANDLED;
}
static struct irqaction ar5315_ahb_proc_interrupt = {
.handler = ar5315_ahb_proc_handler,
.flags = IRQF_DISABLED,
.name = "ar5315_ahb_proc_interrupt",
};
static struct irqaction cascade = {
.handler = no_action,
.flags = IRQF_DISABLED,
.name = "cascade",
};
static void ar5315_gpio_intr_init(int irq_base)
{
int i;
for (i = irq_base; i < irq_base + AR531X_GPIO_IRQ_COUNT; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = NULL;
irq_desc[i].depth = 1;
irq_desc[i].chip = &ar5315_gpio_intr_controller;
}
setup_irq(AR531X_MISC_IRQ_GPIO, &cascade);
gpiointval = sysRegRead(AR5315_GPIO_DI);
}
void ar5315_misc_intr_init(int irq_base)
{
int i;
for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = NULL;
irq_desc[i].depth = 1;
irq_desc[i].chip = &ar5315_misc_intr_controller;
}
setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5315_ahb_proc_interrupt);
setup_irq(AR5315_IRQ_MISC_INTRS, &cascade);
ar5315_gpio_intr_init(AR531X_GPIO_IRQ_BASE);
}

265
target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/pci.c
View File

@ -1,265 +0,0 @@
/*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <asm/bootinfo.h>
#include <asm/paccess.h>
#include <asm/irq_cpu.h>
#include <asm/io.h>
#include "ar531x.h"
#define AR531X_MEM_BASE 0x80800000UL
#define AR531X_MEM_SIZE 0x00ffffffUL
#define AR531X_IO_SIZE 0x00007fffUL
#define IDSEL_SHIFT 13
static spinlock_t ar531x_pci_lock = SPIN_LOCK_UNLOCKED;
static u32 cfgaddr;
static int config_access(int busno, int dev, int func, int where, int size, u32 ptr, int write)
{
u32 address; /* Address to read from */
u32 reg;
unsigned long flags;
int ret = -1;
if ((busno != 0) || ((dev != 0) && (dev != 3)) || (func > 2))
return ret;
spin_lock_irqsave(&ar531x_pci_lock, flags);
/* Select Configuration access */
reg = sysRegRead(AR5315_PCI_MISC_CONFIG);
reg |= AR5315_PCIMISC_CFG_SEL;
sysRegWrite(AR5315_PCI_MISC_CONFIG, reg);
(void)sysRegRead(AR5315_PCI_MISC_CONFIG);
address = (u32)cfgaddr + (1 << (IDSEL_SHIFT + dev)) + (func << 8) + where;
if (size == 1)
address ^= 0x3;
else if (size == 2)
address ^= 0x2;
if (write) {
if (size == 1)
ret = put_dbe(ptr, (u8 *) address);
else if (size == 2)
ret = put_dbe(ptr, (u16 *) address);
else if (size == 4)
ret = put_dbe(ptr, (u32 *) address);
} else {
if (size == 1)
ret = get_dbe(*((u32 *)ptr), (u8 *) address);
else if (size == 2)
ret = get_dbe(*((u32 *)ptr), (u16 *) address);
else if (size == 4)
ret = get_dbe(*((u32 *)ptr), (u32 *) address);
}
/* Select Memory access */
reg = sysRegRead(AR5315_PCI_MISC_CONFIG);
reg &= ~AR5315_PCIMISC_CFG_SEL;
sysRegWrite(AR5315_PCI_MISC_CONFIG, reg);
(void)sysRegRead(AR5315_PCI_MISC_CONFIG);
spin_unlock_irqrestore(&ar531x_pci_lock, flags);
if (ret) {
*((u32 *)ptr) = 0xffffffff;
return PCIBIOS_DEVICE_NOT_FOUND;
}
return PCIBIOS_SUCCESSFUL;
}
static int ar531x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * value)
{
return config_access(bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, (u32) value, 0);
}
static int ar531x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
{
return config_access(bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, value, 1);
}
struct pci_ops ar531x_pci_ops = {
.read = ar531x_pci_read,
.write = ar531x_pci_write,
};
static struct resource ar531x_mem_resource = {
.name = "AR531x PCI MEM",
.start = AR531X_MEM_BASE,
.end = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE - 1 + 0x4000000,
.flags = IORESOURCE_MEM,
};
static struct resource ar531x_io_resource = {
.name = "AR531x PCI I/O",
.start = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE,
.end = AR531X_MEM_BASE + AR531X_MEM_SIZE - 1,
.flags = IORESOURCE_IO,
};
struct pci_controller ar531x_pci_controller = {
.pci_ops = &ar531x_pci_ops,
.mem_resource = &ar531x_mem_resource,
.io_resource = &ar531x_io_resource,
.mem_offset = 0x00000000UL,
.io_offset = 0x00000000UL,
};
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return AR5315_IRQ_LCBUS_PCI;
}
int pcibios_plat_dev_init(struct pci_dev *dev)
{
u32 reg;
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 5);
pci_write_config_word(dev, 0x40, 0);
/* Clear any pending Abort or external Interrupts
* and enable interrupt processing */
reg = sysRegRead(AR5315_PCI_INTEN_REG);
reg &= ~AR5315_PCI_INT_ENABLE;
sysRegWrite(AR5315_PCI_INTEN_REG, reg);
reg = sysRegRead(AR5315_PCI_INT_STATUS);
reg |= (AR5315_PCI_ABORT_INT | AR5315_PCI_EXT_INT);
sysRegWrite(AR5315_PCI_INT_STATUS, reg);
reg = sysRegRead(AR5315_PCI_INT_MASK);
reg |= (AR5315_PCI_EXT_INT | AR5315_PCI_ABORT_INT);
sysRegWrite(AR5315_PCI_INT_MASK, reg);
reg = sysRegRead(AR5315_PCI_INTEN_REG);
reg |= AR5315_PCI_INT_ENABLE;
sysRegWrite(AR5315_PCI_INTEN_REG, reg);
return 0;
}
static void ar5315_pci_fixup(struct pci_dev *dev)
{
struct pci_bus *bus = dev->bus;
if ((PCI_SLOT(dev->devfn) != 3) || (PCI_FUNC(dev->devfn) != 0) || (bus->number != 0))
return;
#define _DEV bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)
printk("PCI: fixing up device %d,%d,%d\n", _DEV);
/* fix up mbars */
config_access(_DEV, PCI_BASE_ADDRESS_0, 4, HOST_PCI_MBAR0, 1);
config_access(_DEV, PCI_BASE_ADDRESS_1, 4, HOST_PCI_MBAR1, 1);
config_access(_DEV, PCI_BASE_ADDRESS_2, 4, HOST_PCI_MBAR2, 1);
config_access(_DEV, PCI_COMMAND, 4,
PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER|PCI_COMMAND_SPECIAL|
PCI_COMMAND_INVALIDATE|PCI_COMMAND_PARITY|PCI_COMMAND_SERR|
PCI_COMMAND_FAST_BACK, 1);
#undef _DEV
}
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, ar5315_pci_fixup);
int __init ar5315_pci_init(void)
{
u32 reg;
if (mips_machtype != MACH_ATHEROS_AR2315)
return -ENODEV;
printk("AR531x PCI init... \n");
cfgaddr = (u32) ioremap_nocache(0x80000000, 1*1024*1024); /* Remap PCI config space */
ar531x_pci_controller.io_map_base =
(unsigned long) ioremap_nocache(AR531X_MEM_BASE + AR531X_MEM_SIZE, AR531X_IO_SIZE);
set_io_port_base(ar531x_pci_controller.io_map_base); /* PCI I/O space */
reg = sysRegRead(AR5315_RESET);
sysRegWrite(AR5315_RESET, reg | AR5315_RESET_PCIDMA);
udelay(10*1000);
sysRegWrite(AR5315_RESET, reg & ~AR5315_RESET_PCIDMA);
sysRegRead(AR5315_RESET); /* read after */
udelay(10*1000);
reg = sysRegRead(AR5315_ENDIAN_CTL);
reg |= AR5315_CONFIG_PCIAHB | AR5315_CONFIG_PCIAHB_BRIDGE;
sysRegWrite(AR5315_ENDIAN_CTL, reg);
reg = sysRegRead(AR5315_PCICLK);
reg = 4;
sysRegWrite(AR5315_PCICLK, reg);
reg = sysRegRead(AR5315_AHB_ARB_CTL);
reg |= (ARB_PCI);
sysRegWrite(AR5315_AHB_ARB_CTL, reg);
reg = sysRegRead(AR5315_IF_CTL);
reg &= ~(IF_PCI_CLK_MASK | IF_MASK);
reg |= (IF_PCI | IF_PCI_HOST | IF_PCI_INTR | (IF_PCI_CLK_OUTPUT_CLK << IF_PCI_CLK_SHIFT));
sysRegWrite(AR5315_IF_CTL, reg);
/* Reset the PCI bus by setting bits 5-4 in PCI_MCFG */
reg = sysRegRead(AR5315_PCI_MISC_CONFIG);
reg &= ~(AR5315_PCIMISC_RST_MODE);
reg |= AR5315_PCIRST_LOW;
sysRegWrite(AR5315_PCI_MISC_CONFIG, reg);
/* wait for 100 ms */
udelay(100*1000);
/* Bring the PCI out of reset */
reg = sysRegRead(AR5315_PCI_MISC_CONFIG);
reg &= ~(AR5315_PCIMISC_RST_MODE);
reg |= (AR5315_PCIRST_HIGH | AR5315_PCICACHE_DIS | 0x8);
sysRegWrite(AR5315_PCI_MISC_CONFIG, reg);
sysRegWrite(AR5315_PCI_UNCACHE_CFG,
0x1E | /* 1GB uncached */
(1 << 5) | /* Enable uncached */
(0x2 << 30) /* Base: 0x80000000 */
);
(void)sysRegRead(AR5315_PCI_UNCACHE_CFG); /* flush */
udelay(500*1000);
/* dirty hack - anyone with a datasheet that knows the memory map ? */
ioport_resource.start = 0x10000000;
ioport_resource.end = 0xffffffff;
iomem_resource.start = 0x10000000;
iomem_resource.end = 0xffffffff;
register_pci_controller(&ar531x_pci_controller);
printk("done\n");
return 0;
}
arch_initcall(ar5315_pci_init);

299
target/linux/atheros/files-2.6.28/arch/mips/atheros/board.c
View File

@ -1,299 +0,0 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
* Copyright (C) 2006 FON Technology, SL.
* Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
* Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
*/
/*
* Platform devices for Atheros SoCs
*/
#include <linux/autoconf.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/random.h>
#include <asm/bootinfo.h>
#include <asm/irq_cpu.h>
#include <asm/io.h>
#include <ar531x.h>
char *board_config = NULL;
char *radio_config = NULL;
int broken_boarddata = 0;
extern int early_serial_setup(struct uart_port *port);
static inline bool
check_radio_magic(unsigned char *addr)
{
addr += 0x7a; /* offset for flash magic */
if ((addr[0] == 0x5a) && (addr[1] == 0xa5)) {
return 1;
}
return 0;
}
static inline bool
check_board_data(unsigned char *flash_limit, unsigned char *addr, bool broken)
{
/* config magic found */
if ( *(int *)addr == 0x35333131)
return 1;
if (!broken)
return 0;
if (check_radio_magic(addr + 0xf8))
radio_config = addr + 0xf8;
if ((addr < flash_limit + 0x10000) &&
check_radio_magic(addr + 0x10000))
radio_config = addr + 0x10000;
if (radio_config) {
/* broken board data detected, use radio data to find the offset,
* user will fix this */
broken_boarddata = 1;
return 1;
}
return 0;
}
static u8 *find_board_config(char *flash_limit, bool broken)
{
char *addr;
int found = 0;
for (addr = (char *) (flash_limit - 0x1000);
addr >= (char *) (flash_limit - 0x30000);
addr -= 0x1000) {
if (check_board_data(flash_limit, addr, broken)) {
found = 1;
break;
}
}
if (!found)
addr = NULL;
return addr;
}
static u8 *find_radio_config(char *flash_limit, char *board_config)
{
int dataFound;
char *radio_config;
/*
* Now find the start of Radio Configuration data, using heuristics:
* Search forward from Board Configuration data by 0x1000 bytes
* at a time until we find non-0xffffffff.
*/
dataFound = 0;
for (radio_config = board_config + 0x1000;
(radio_config < flash_limit);
radio_config += 0x1000) {
if ((*(u32 *)radio_config != 0xffffffff) &&
check_radio_magic(radio_config)) {
dataFound = 1;
break;
}
}
#ifdef CONFIG_ATHEROS_AR5315
if (!dataFound) { /* AR2316 relocates radio config to new location */
for (radio_config = board_config + 0xf8;
(radio_config < flash_limit - 0x1000 + 0xf8);
radio_config += 0x1000) {
if ((*(u32 *)radio_config != 0xffffffff) &&
check_radio_magic(radio_config)) {
dataFound = 1;
break;
}
}
}
#endif
if (!dataFound) {
printk("Could not find Radio Configuration data\n");
radio_config = 0;
}
return (u8 *) radio_config;
}
int __init ar531x_find_config(char *flash_limit)
{
struct ar531x_boarddata *bd;
unsigned int rcfg_size;
char *bcfg, *rcfg;
/* Copy the board and radio data to RAM, because with the new
* spiflash driver, accessing the mapped memory directly is no
* longer safe */
bcfg = find_board_config(flash_limit, false);
if (!bcfg)
bcfg = find_board_config(flash_limit, true);
if (!bcfg) {
printk("WARNING: No board configuration data found!\n");
return -ENODEV;
}
board_config = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
memcpy(board_config, bcfg, 0x100);
if (broken_boarddata) {
printk("WARNING: broken board data detected\n");
bd = (struct ar531x_boarddata *)board_config;
if (!memcmp(bd->enet0Mac, "\x00\x00\x00\x00\x00\x00", 6)) {
printk("Fixing up empty mac addresses\n");
bd->enet0Mac[1] = 0x13;
bd->enet0Mac[2] = 0x37;
get_random_bytes(bd->enet0Mac + 3, 3);
bd->wlan0Mac[1] = 0x13;
bd->wlan0Mac[2] = 0x37;
get_random_bytes(bd->wlan0Mac + 3, 3);
}
}
/* Radio config starts 0x100 bytes after board config, regardless
* of what the physical layout on the flash chip looks like */
if (radio_config)
rcfg = radio_config;
else
rcfg = find_radio_config(flash_limit, bcfg);
if (!rcfg)
return -ENODEV;
radio_config = board_config + 0x100 + ((rcfg - bcfg) & 0xfff);
printk("Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, radio_config - board_config);
rcfg_size = BOARD_CONFIG_BUFSZ - (radio_config - board_config);
memcpy(radio_config, rcfg, rcfg_size);
return 0;
}
void __init serial_setup(unsigned long mapbase, unsigned int uartclk)
{
struct uart_port s;
memset(&s, 0, sizeof(s));
s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
s.iotype = UPIO_MEM;
s.irq = AR531X_MISC_IRQ_UART0;
s.regshift = 2;
s.mapbase = mapbase;
s.uartclk = uartclk;
s.membase = (void __iomem *)s.mapbase;
early_serial_setup(&s);
}
void __init plat_mem_setup(void)
{
DO_AR5312(ar5312_plat_setup();)
DO_AR5315(ar5315_plat_setup();)
/* Disable data watchpoints */
write_c0_watchlo0(0);
}
const char *get_system_type(void)
{
switch (mips_machtype) {
#ifdef CONFIG_ATHEROS_AR5312
case MACH_ATHEROS_AR5312:
return "Atheros AR5312";
case MACH_ATHEROS_AR2312:
return "Atheros AR2312";
case MACH_ATHEROS_AR2313:
return "Atheros AR2313";
#endif
#ifdef CONFIG_ATHEROS_AR5315
case MACH_ATHEROS_AR2315:
return "Atheros AR2315";
case MACH_ATHEROS_AR2316:
return "Atheros AR2316";
case MACH_ATHEROS_AR2317:
return "Atheros AR2317";
case MACH_ATHEROS_AR2318:
return "Atheros AR2318";
#endif
}
return "Atheros (unknown)";
}
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
void __init plat_timer_setup(struct irqaction *irq)
{
unsigned int count;
/* Usually irq is timer_irqaction (timer_interrupt) */
setup_irq(AR531X_IRQ_CPU_CLOCK, irq);
/* to generate the first CPU timer interrupt */
count = read_c0_count();
write_c0_compare(count + 1000);
}
#endif
asmlinkage void plat_irq_dispatch(void)
{
DO_AR5312(ar5312_irq_dispatch();)
DO_AR5315(ar5315_irq_dispatch();)
}
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24))
void (*board_time_init)(void);
void __init plat_time_init(void) {
board_time_init();
}
#endif
void __init arch_init_irq(void)
{
clear_c0_status(ST0_IM);
mips_cpu_irq_init();
/* Initialize interrupt controllers */
DO_AR5312(ar5312_misc_intr_init(AR531X_MISC_IRQ_BASE);)
DO_AR5315(ar5315_misc_intr_init(AR531X_MISC_IRQ_BASE);)
}
static int __init ar531x_register_gpiodev(void)
{
static struct resource res = {
.start = 0xFFFFFFFF,
};
struct platform_device *pdev;
printk(KERN_INFO "ar531x: Registering GPIODEV device\n");
pdev = platform_device_register_simple("GPIODEV", 0, &res, 1);
if (!pdev) {
printk(KERN_ERR "ar531x: GPIODEV init failed\n");
return -ENODEV;
}
return 0;
}
device_initcall(ar531x_register_gpiodev);

45
target/linux/atheros/files-2.6.28/arch/mips/atheros/prom.c
View File

@ -1,45 +0,0 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright MontaVista Software Inc
* Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
* Copyright (C) 2006 FON Technology, SL.
* Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
* Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
*/
/*
* Prom setup file for ar531x
*/
#include <linux/init.h>
#include <linux/autoconf.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <asm/bootinfo.h>
#include <asm/addrspace.h>
#include <ar531x.h>
void __init prom_init(void)
{
char **argv;
mips_machtype = -1;
DO_AR5312(ar5312_prom_init();)
DO_AR5315(ar5315_prom_init();)
#if 0
argv = (char **)fw_arg1;
/* RedBoot desired command line is argv[1] */
strcat(arcs_cmdline, argv[1]);
#endif
}
void __init prom_free_prom_memory(void)
{
}

162
target/linux/atheros/files-2.6.28/arch/mips/atheros/reset.c
View File

@ -1,162 +0,0 @@
#include <linux/module.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/kobject.h>
#include <linux/workqueue.h>
#include <linux/skbuff.h>
#include <linux/netlink.h>
#include <net/sock.h>
#include <asm/uaccess.h>
#include <ar531x.h>
#define AR531X_RESET_GPIO_IRQ (AR531X_GPIO_IRQ(bcfg->resetConfigGpio))
struct event_t {
struct work_struct wq;
int set;
unsigned long jiffies;
};
static struct ar531x_boarddata *bcfg;
static struct timer_list rst_button_timer;
extern struct sock *uevent_sock;
extern u64 uevent_next_seqnum(void);
static unsigned long seen;
static inline void add_msg(struct sk_buff *skb, char *msg)
{
char *scratch;
scratch = skb_put(skb, strlen(msg) + 1);
sprintf(scratch, msg);
}
static void hotplug_button(struct work_struct *wq)
{
struct sk_buff *skb;
struct event_t *event;
size_t len;
char *scratch, *s;
char buf[128];
event = container_of(wq, struct event_t, wq);
if (!uevent_sock)
goto done;
/* allocate message with the maximum possible size */
s = event->set ? "pressed" : "released";
len = strlen(s) + 2;
skb = alloc_skb(len + 2048, GFP_KERNEL);
if (!skb)
goto done;
/* add header */
scratch = skb_put(skb, len);
sprintf(scratch, "%s@",s);
/* copy keys to our continuous event payload buffer */
add_msg(skb, "HOME=/");
add_msg(skb, "PATH=/sbin:/bin:/usr/sbin:/usr/bin");
add_msg(skb, "SUBSYSTEM=button");
add_msg(skb, "BUTTON=reset");
add_msg(skb, (event->set ? "ACTION=pressed" : "ACTION=released"));
sprintf(buf, "SEEN=%ld", (event->jiffies - seen)/HZ);
add_msg(skb, buf);
snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum());
add_msg(skb, buf);
NETLINK_CB(skb).dst_group = 1;
netlink_broadcast(uevent_sock, skb, 0, 1, GFP_KERNEL);
done:
kfree(event);
}
static int no_release_workaround = 1;
static void
reset_button_poll(unsigned long unused)
{
struct event_t *event;
int gpio = ~0;
if(!no_release_workaround)
return;
DO_AR5315(gpio = sysRegRead(AR5315_GPIO_DI);)
gpio &= 1 << (AR531X_RESET_GPIO_IRQ - AR531X_GPIO_IRQ_BASE);
if(gpio)
{
rst_button_timer.expires = jiffies + (HZ / 4);
add_timer(&rst_button_timer);
} else {
event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
if (!event)
{
printk("Could not alloc hotplug event\n");
return;
}
event->set = 0;
event->jiffies = jiffies;
INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
schedule_work(&event->wq);
}
}
static irqreturn_t button_handler(int irq, void *dev_id)
{
static int pressed = 0;
struct event_t *event;
u32 gpio = ~0;
event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
if (!event)
return IRQ_NONE;
pressed = !pressed;
DO_AR5315(gpio = sysRegRead(AR5315_GPIO_DI);)
gpio &= 1 << (irq - AR531X_GPIO_IRQ_BASE);
event->set = gpio;
if(!event->set)
no_release_workaround = 0;
event->jiffies = jiffies;
INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
schedule_work(&event->wq);
seen = jiffies;
if(event->set && no_release_workaround)
mod_timer(&rst_button_timer, jiffies + (HZ / 4));
return IRQ_HANDLED;
}
void ar531x_disable_reset_button(void)
{
disable_irq(AR531X_RESET_GPIO_IRQ);
}
EXPORT_SYMBOL(ar531x_disable_reset_button);
int __init ar531x_init_reset(void)
{
bcfg = (struct ar531x_boarddata *) board_config;
seen = jiffies;
init_timer(&rst_button_timer);
rst_button_timer.function = reset_button_poll;
rst_button_timer.expires = jiffies + HZ / 50;
add_timer(&rst_button_timer);
request_irq(AR531X_RESET_GPIO_IRQ, &button_handler, IRQF_SAMPLE_RANDOM, "ar531x_reset", NULL);
return 0;
}
module_init(ar531x_init_reset);

234
target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5312/ar5312.h
View File

@ -1,234 +0,0 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
* Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
* Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
*/
#ifndef AR5312_H
#define AR5312_H
#include <asm/addrspace.h>
/*
* IRQs
*/
#define AR5312_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
#define AR5312_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
#define AR5312_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
#define AR5312_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
#define AR5312_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
/* Address Map */
#define AR531X_WLAN0 0x18000000
#define AR531X_WLAN1 0x18500000
#define AR531X_ENET0 0x18100000
#define AR531X_ENET1 0x18200000
#define AR531X_SDRAMCTL 0x18300000
#define AR531X_FLASHCTL 0x18400000
#define AR531X_APBBASE 0x1c000000
#define AR531X_FLASH 0x1e000000
#define AR531X_UART0 0xbc000003 /* UART MMR */
/*
* AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
* should be considered available. The AR5312 supports 2 enet MACS,
* even though many reference boards only actually use 1 of them
* (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
* The AR2312 supports 1 enet MAC.
*/
#define AR531X_NUM_ENET_MAC 2
/*
* Need these defines to determine true number of ethernet MACs
*/
#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
#define AR531X_RADIO_MASK_OFF 0xc8
#define AR531X_RADIO0_MASK 0x0003
#define AR531X_RADIO1_MASK 0x000c
#define AR531X_RADIO1_S 2
/*
* AR531X_NUM_WMAC defines the number of Wireless MACs that\
* should be considered available.
*/
#define AR531X_NUM_WMAC 2
/* Reset/Timer Block Address Map */
#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000)
#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */
#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */
#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064)
#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c)
#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070)
#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074)
#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078)
#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c)
#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */
#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */
/* AR531X_WD_CTRL register bit field definitions */
#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
#define AR531X_WD_CTRL_NMI 0x0001
#define AR531X_WD_CTRL_RESET 0x0002
/* AR531X_ISR register bit field definitions */
#define AR531X_ISR_NONE 0x0000
#define AR531X_ISR_TIMER 0x0001
#define AR531X_ISR_AHBPROC 0x0002
#define AR531X_ISR_AHBDMA 0x0004
#define AR531X_ISR_GPIO 0x0008
#define AR531X_ISR_UART0 0x0010
#define AR531X_ISR_UART0DMA 0x0020
#define AR531X_ISR_WD 0x0040
#define AR531X_ISR_LOCAL 0x0080
/* AR531X_RESET register bit field definitions */
#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */
#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */
#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */
#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */
#define AR531X_RESET_WMAC0_BITS \
AR531X_RESET_WLAN0 |\
AR531X_RESET_WARM_WLAN0_MAC |\
AR531X_RESET_WARM_WLAN0_BB
#define AR531X_RESERT_WMAC1_BITS \
AR531X_RESET_WLAN1 |\
AR531X_RESET_WARM_WLAN1_MAC |\
AR531X_RESET_WARM_WLAN1_BB
/* AR5312_CLOCKCTL1 register bit field definitions */
#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
/* Valid for AR5312 and AR2312 */
#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
/* Valid for AR2313 */
#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
/* AR531X_ENABLE register bit field definitions */
#define AR531X_ENABLE_WLAN0 0x0001
#define AR531X_ENABLE_ENET0 0x0002
#define AR531X_ENABLE_ENET1 0x0004
#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
#define AR531X_ENABLE_WLAN1 \
(AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
/* AR531X_REV register bit field definitions */
#define AR531X_REV_WMAC_MAJ 0xf000
#define AR531X_REV_WMAC_MAJ_S 12
#define AR531X_REV_WMAC_MIN 0x0f00
#define AR531X_REV_WMAC_MIN_S 8
#define AR531X_REV_MAJ 0x00f0
#define AR531X_REV_MAJ_S 4
#define AR531X_REV_MIN 0x000f
#define AR531X_REV_MIN_S 0
#define AR531X_REV_CHIP (AR531X_REV_MAJ|AR531X_REV_MIN)
/* Major revision numbers, bits 7..4 of Revision ID register */
#define AR531X_REV_MAJ_AR5312 0x4
#define AR531X_REV_MAJ_AR2313 0x5
/* Minor revision numbers, bits 3..0 of Revision ID register */
#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
/* AR531X_FLASHCTL register bit field definitions */
#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
#define FLASHCTL_IDCY_S 0
#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
#define FLASHCTL_WST1_S 5
#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
#define FLASHCTL_WST2_S 11
#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */
#define FLASHCTL_AC_S 16
#define FLASHCTL_AC_128K 0x00000000
#define FLASHCTL_AC_256K 0x00010000
#define FLASHCTL_AC_512K 0x00020000
#define FLASHCTL_AC_1M 0x00030000
#define FLASHCTL_AC_2M 0x00040000
#define FLASHCTL_AC_4M 0x00050000
#define FLASHCTL_AC_8M 0x00060000
#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */
#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */
#define FLASHCTL_WP 0x04000000 /* Write protect */
#define FLASHCTL_BM 0x08000000 /* Burst mode */
#define FLASHCTL_MW 0x30000000 /* Memory width */
#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */
#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */
#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */
#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */
#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */
#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00)
#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04)
#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08)
/* ARM SDRAM Controller -- just enough to determine memory size */
#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
#define MEM_CFG1_AC0_S 8
#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
#define MEM_CFG1_AC1_S 12
/* GPIO Address Map */
#define AR531X_GPIO (AR531X_APBBASE + 0x2000)
#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */
#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */
#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */
/* GPIO Control Register bit field definitions */
#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */
#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */
#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
#endif

694
target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5315/ar5315.h
View File

@ -1,694 +0,0 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
* Copyright (C) 2006 FON Technology, SL.
* Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
* Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
*/
#ifndef AR5315_H
#define AR5315_H
/*
* IRQs
*/
#define AR5315_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
#define AR5315_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
#define AR5315_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
#define AR5315_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
#define AR5315_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
/*
* Address map
*/
#define AR5315_SDRAM0 0x00000000 /* DRAM */
#define AR5315_SPI_READ 0x08000000 /* SPI FLASH */
#define AR5315_WLAN0 0xB0000000 /* Wireless MMR */
#define AR5315_PCI 0xB0100000 /* PCI MMR */
#define AR5315_SDRAMCTL 0xB0300000 /* SDRAM MMR */
#define AR5315_LOCAL 0xB0400000 /* LOCAL BUS MMR */
#define AR5315_ENET0 0xB0500000 /* ETHERNET MMR */
#define AR5315_DSLBASE 0xB1000000 /* RESET CONTROL MMR */
#define AR5315_UART0 0xB1100003 /* UART MMR */
#define AR5315_SPI 0xB1300000 /* SPI FLASH MMR */
#define AR5315_FLASHBT 0xBfc00000 /* ro boot alias to FLASH */
#define AR5315_RAM1 0x40000000 /* ram alias */
#define AR5315_PCIEXT 0x80000000 /* pci external */
#define AR5315_RAM2 0xc0000000 /* ram alias */
#define AR5315_RAM3 0xe0000000 /* ram alias */
/*
* Reset Register
*/
#define AR5315_COLD_RESET (AR5315_DSLBASE + 0x0000)
/* Cold Reset */
#define RESET_COLD_AHB 0x00000001
#define RESET_COLD_APB 0x00000002
#define RESET_COLD_CPU 0x00000004
#define RESET_COLD_CPUWARM 0x00000008
#define RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */
#define AR5317_RESET_SYSTEM 0x00000010
/* Warm Reset */
#define AR5315_RESET (AR5315_DSLBASE + 0x0004)
#define AR5315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */
#define AR5315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */
#define AR5315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */
#define AR5315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */
#define AR5315_RESET_MEMCTL 0x00000010 /* warm reset memory controller */
#define AR5315_RESET_LOCAL 0x00000020 /* warm reset local bus */
#define AR5315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */
#define AR5315_RESET_SPI 0x00000080 /* warm reset SPI interface */
#define AR5315_RESET_UART0 0x00000100 /* warm reset UART0 */
#define AR5315_RESET_IR_RSVD 0x00000200 /* warm reset IR interface */
#define AR5315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */
#define AR5315_RESET_ENET0 0x00000800 /* cold reset ENET0 mac */
/*
* AHB master arbitration control
*/
#define AR5315_AHB_ARB_CTL (AR5315_DSLBASE + 0x0008)
#define ARB_CPU 0x00000001 /* CPU, default */
#define ARB_WLAN 0x00000002 /* WLAN */
#define ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */
#define ARB_LOCAL 0x00000008 /* LOCAL */
#define ARB_PCI 0x00000010 /* PCI */
#define ARB_ETHERNET 0x00000020 /* Ethernet */
#define ARB_RETRY 0x00000100 /* retry policy, debug only */
/*
* Config Register
*/
#define AR5315_ENDIAN_CTL (AR5315_DSLBASE + 0x000c)
#define AR5315_CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */
#define AR5315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */
#define AR5315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */
#define AR5315_CONFIG_PCI 0x00000008 /* PCI byteswap */
#define AR5315_CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */
#define AR5315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */
#define AR5315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */
#define AR5315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */
#define AR5315_CONFIG_CPU 0x00000400 /* CPU big endian */
#define AR5315_CONFIG_PCIAHB 0x00000800
#define AR5315_CONFIG_PCIAHB_BRIDGE 0x00001000
#define AR5315_CONFIG_SPI 0x00008000 /* SPI byteswap */
#define AR5315_CONFIG_CPU_DRAM 0x00010000
#define AR5315_CONFIG_CPU_PCI 0x00020000
#define AR5315_CONFIG_CPU_MMR 0x00040000
#define AR5315_CONFIG_BIG 0x00000400
/*
* NMI control
*/
#define AR5315_NMI_CTL (AR5315_DSLBASE + 0x0010)
#define NMI_EN 1
/*
* Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
*/
#define AR5315_SREV (AR5315_DSLBASE + 0x0014)
#define AR5315_REV_MAJ 0x00f0
#define AR5315_REV_MAJ_S 4
#define AR5315_REV_MIN 0x000f
#define AR5315_REV_MIN_S 0
#define AR5315_REV_CHIP (AR5315_REV_MAJ|AR5315_REV_MIN)
/*
* Interface Enable
*/
#define AR5315_IF_CTL (AR5315_DSLBASE + 0x0018)
#define IF_MASK 0x00000007
#define IF_DISABLED 0
#define IF_PCI 1
#define IF_TS_LOCAL 2
#define IF_ALL 3 /* only for emulation with separate pins */
#define IF_LOCAL_HOST 0x00000008
#define IF_PCI_HOST 0x00000010
#define IF_PCI_INTR 0x00000020
#define IF_PCI_CLK_MASK 0x00030000
#define IF_PCI_CLK_INPUT 0
#define IF_PCI_CLK_OUTPUT_LOW 1
#define IF_PCI_CLK_OUTPUT_CLK 2
#define IF_PCI_CLK_OUTPUT_HIGH 3
#define IF_PCI_CLK_SHIFT 16
/* Major revision numbers, bits 7..4 of Revision ID register */
#define REV_MAJ_AR5311 0x01
#define REV_MAJ_AR5312 0x04
#define REV_MAJ_AR5315 0x0B
/*
* APB Interrupt control
*/
#define AR5315_ISR (AR5315_DSLBASE + 0x0020)
#define AR5315_IMR (AR5315_DSLBASE + 0x0024)
#define AR5315_GISR (AR5315_DSLBASE + 0x0028)
#define AR5315_ISR_UART0 0x0001 /* high speed UART */
#define AR5315_ISR_I2C_RSVD 0x0002 /* I2C bus */
#define AR5315_ISR_SPI 0x0004 /* SPI bus */
#define AR5315_ISR_AHB 0x0008 /* AHB error */
#define AR5315_ISR_APB 0x0010 /* APB error */
#define AR5315_ISR_TIMER 0x0020 /* timer */
#define AR5315_ISR_GPIO 0x0040 /* GPIO */
#define AR5315_ISR_WD 0x0080 /* watchdog */
#define AR5315_ISR_IR_RSVD 0x0100 /* IR */
#define AR5315_GISR_MISC 0x0001
#define AR5315_GISR_WLAN0 0x0002
#define AR5315_GISR_MPEGTS_RSVD 0x0004
#define AR5315_GISR_LOCALPCI 0x0008
#define AR5315_GISR_WMACPOLL 0x0010
#define AR5315_GISR_TIMER 0x0020
#define AR5315_GISR_ETHERNET 0x0040
/*
* Interrupt routing from IO to the processor IP bits
* Define our inter mask and level
*/
#define AR5315_INTR_MISCIO SR_IBIT3
#define AR5315_INTR_WLAN0 SR_IBIT4
#define AR5315_INTR_ENET0 SR_IBIT5
#define AR5315_INTR_LOCALPCI SR_IBIT6
#define AR5315_INTR_WMACPOLL SR_IBIT7
#define AR5315_INTR_COMPARE SR_IBIT8
/*
* Timers
*/
#define AR5315_TIMER (AR5315_DSLBASE + 0x0030)
#define AR5315_RELOAD (AR5315_DSLBASE + 0x0034)
#define AR5315_WD (AR5315_DSLBASE + 0x0038)
#define AR5315_WDC (AR5315_DSLBASE + 0x003c)
#define WDC_RESET 0x00000002 /* reset on watchdog */
#define WDC_NMI 0x00000001 /* NMI on watchdog */
#define WDC_IGNORE_EXPIRATION 0x00000000
/*
* CPU Performance Counters
*/
#define AR5315_PERFCNT0 (AR5315_DSLBASE + 0x0048)
#define AR5315_PERFCNT1 (AR5315_DSLBASE + 0x004c)
#define PERF_DATAHIT 0x0001 /* Count Data Cache Hits */
#define PERF_DATAMISS 0x0002 /* Count Data Cache Misses */
#define PERF_INSTHIT 0x0004 /* Count Instruction Cache Hits */
#define PERF_INSTMISS 0x0008 /* Count Instruction Cache Misses */
#define PERF_ACTIVE 0x0010 /* Count Active Processor Cycles */
#define PERF_WBHIT 0x0020 /* Count CPU Write Buffer Hits */
#define PERF_WBMISS 0x0040 /* Count CPU Write Buffer Misses */
#define PERF_EB_ARDY 0x0001 /* Count EB_ARdy signal */
#define PERF_EB_AVALID 0x0002 /* Count EB_AValid signal */
#define PERF_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */
#define PERF_EB_RDVAL 0x0008 /* Count EB_RdVal signal */
#define PERF_VRADDR 0x0010 /* Count valid read address cycles */
#define PERF_VWADDR 0x0020 /* Count valid write address cycles */
#define PERF_VWDATA 0x0040 /* Count valid write data cycles */
/*
* AHB Error Reporting.
*/
#define AR5315_AHB_ERR0 (AR5315_DSLBASE + 0x0050) /* error */
#define AR5315_AHB_ERR1 (AR5315_DSLBASE + 0x0054) /* haddr */
#define AR5315_AHB_ERR2 (AR5315_DSLBASE + 0x0058) /* hwdata */
#define AR5315_AHB_ERR3 (AR5315_DSLBASE + 0x005c) /* hrdata */
#define AR5315_AHB_ERR4 (AR5315_DSLBASE + 0x0060) /* status */
#define AHB_ERROR_DET 1 /* AHB Error has been detected, */
/* write 1 to clear all bits in ERR0 */
#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */
#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */
#define PROCERR_HMAST 0x0000000f
#define PROCERR_HMAST_DFLT 0
#define PROCERR_HMAST_WMAC 1
#define PROCERR_HMAST_ENET 2
#define PROCERR_HMAST_PCIENDPT 3
#define PROCERR_HMAST_LOCAL 4
#define PROCERR_HMAST_CPU 5
#define PROCERR_HMAST_PCITGT 6
#define PROCERR_HMAST_S 0
#define PROCERR_HWRITE 0x00000010
#define PROCERR_HSIZE 0x00000060
#define PROCERR_HSIZE_S 5
#define PROCERR_HTRANS 0x00000180
#define PROCERR_HTRANS_S 7
#define PROCERR_HBURST 0x00000e00
#define PROCERR_HBURST_S 9
/*
* Clock Control
*/
#define AR5315_PLLC_CTL (AR5315_DSLBASE + 0x0064)
#define AR5315_PLLV_CTL (AR5315_DSLBASE + 0x0068)
#define AR5315_CPUCLK (AR5315_DSLBASE + 0x006c)
#define AR5315_AMBACLK (AR5315_DSLBASE + 0x0070)
#define AR5315_SYNCCLK (AR5315_DSLBASE + 0x0074)
#define AR5315_DSL_SLEEP_CTL (AR5315_DSLBASE + 0x0080)
#define AR5315_DSL_SLEEP_DUR (AR5315_DSLBASE + 0x0084)
/* PLLc Control fields */
#define PLLC_REF_DIV_M 0x00000003
#define PLLC_REF_DIV_S 0
#define PLLC_FDBACK_DIV_M 0x0000007C
#define PLLC_FDBACK_DIV_S 2
#define PLLC_ADD_FDBACK_DIV_M 0x00000080
#define PLLC_ADD_FDBACK_DIV_S 7
#define PLLC_CLKC_DIV_M 0x0001c000
#define PLLC_CLKC_DIV_S 14
#define PLLC_CLKM_DIV_M 0x00700000
#define PLLC_CLKM_DIV_S 20
/* CPU CLK Control fields */
#define CPUCLK_CLK_SEL_M 0x00000003
#define CPUCLK_CLK_SEL_S 0
#define CPUCLK_CLK_DIV_M 0x0000000c
#define CPUCLK_CLK_DIV_S 2
/* AMBA CLK Control fields */
#define AMBACLK_CLK_SEL_M 0x00000003
#define AMBACLK_CLK_SEL_S 0
#define AMBACLK_CLK_DIV_M 0x0000000c
#define AMBACLK_CLK_DIV_S 2
#if defined(COBRA_EMUL)
#define AR5315_AMBA_CLOCK_RATE 20000000
#define AR5315_CPU_CLOCK_RATE 40000000
#else
#if defined(DEFAULT_PLL)
#define AR5315_AMBA_CLOCK_RATE 40000000
#define AR5315_CPU_CLOCK_RATE 40000000
#else
#define AR5315_AMBA_CLOCK_RATE 92000000
#define AR5315_CPU_CLOCK_RATE 184000000
#endif /* ! DEFAULT_PLL */
#endif /* ! COBRA_EMUL */
#define AR5315_UART_CLOCK_RATE AR5315_AMBA_CLOCK_RATE
#define AR5315_SDRAM_CLOCK_RATE AR5315_AMBA_CLOCK_RATE
/*
* The UART computes baud rate as:
* baud = clock / (16 * divisor)
* where divisor is specified as a High Byte (DLM) and a Low Byte (DLL).
*/
#define DESIRED_BAUD_RATE 38400
#define CLOCKCTL_UART0 0x0010 /* enable UART0 external clock */
/*
* Applicable "PCICFG" bits for WLAN(s). Assoc status and LED mode.
*/
#define ASSOC_STATUS_M 0x00000003
#define ASSOC_STATUS_NONE 0
#define ASSOC_STATUS_PENDING 1
#define ASSOC_STATUS_ASSOCIATED 2
#define LED_MODE_M 0x0000001c
#define LED_BLINK_THRESHOLD_M 0x000000e0
#define LED_SLOW_BLINK_MODE 0x00000100
/*
* GPIO
*/
#define AR5315_GPIO_DI (AR5315_DSLBASE + 0x0088)
#define AR5315_GPIO_DO (AR5315_DSLBASE + 0x0090)
#define AR5315_GPIO_CR (AR5315_DSLBASE + 0x0098)
#define AR5315_GPIO_INT (AR5315_DSLBASE + 0x00a0)
#define AR5315_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
#define AR5315_GPIO_CR_O(x) (1 << (x)) /* output */
#define AR5315_GPIO_CR_I(x) (0) /* input */
#define AR5315_GPIO_INT_S(x) (x) /* interrupt enable */
#define AR5315_GPIO_INT_M (0x3F) /* mask for int */
#define AR5315_GPIO_INT_LVL(x) ((x) << 6) /* interrupt level */
#define AR5315_GPIO_INT_LVL_M ((0x3) << 6) /* mask for int level */
#define AR5315_GPIO_INT_MAX_Y 1 /* Maximum value of Y for AR5313_GPIO_INT_* macros */
#define AR5315_GPIO_INT_LVL_OFF 0 /* Triggerring off */
#define AR5315_GPIO_INT_LVL_LOW 1 /* Low Level Triggered */
#define AR5315_GPIO_INT_LVL_HIGH 2 /* High Level Triggered */
#define AR5315_GPIO_INT_LVL_EDGE 3 /* Edge Triggered */
#define AR5315_RESET_GPIO 5
#define AR5315_NUM_GPIO 22
/*
* PCI Clock Control
*/
#define AR5315_PCICLK (AR5315_DSLBASE + 0x00a4)
#define AR5315_PCICLK_INPUT_M 0x3
#define AR5315_PCICLK_INPUT_S 0
#define AR5315_PCICLK_PLLC_CLKM 0
#define AR5315_PCICLK_PLLC_CLKM1 1
#define AR5315_PCICLK_PLLC_CLKC 2
#define AR5315_PCICLK_REF_CLK 3
#define AR5315_PCICLK_DIV_M 0xc
#define AR5315_PCICLK_DIV_S 2
#define AR5315_PCICLK_IN_FREQ 0
#define AR5315_PCICLK_IN_FREQ_DIV_6 1
#define AR5315_PCICLK_IN_FREQ_DIV_8 2
#define AR5315_PCICLK_IN_FREQ_DIV_10 3
/*
* Observation Control Register
*/
#define AR5315_OCR (AR5315_DSLBASE + 0x00b0)
#define OCR_GPIO0_IRIN 0x0040
#define OCR_GPIO1_IROUT 0x0080
#define OCR_GPIO3_RXCLR 0x0200
/*
* General Clock Control
*/
#define AR5315_MISCCLK (AR5315_DSLBASE + 0x00b4)
#define MISCCLK_PLLBYPASS_EN 0x00000001
#define MISCCLK_PROCREFCLK 0x00000002
/*
* SDRAM Controller
* - No read or write buffers are included.
*/
#define AR5315_MEM_CFG (AR5315_SDRAMCTL + 0x00)
#define AR5315_MEM_CTRL (AR5315_SDRAMCTL + 0x0c)
#define AR5315_MEM_REF (AR5315_SDRAMCTL + 0x10)
#define SDRAM_DATA_WIDTH_M 0x00006000
#define SDRAM_DATA_WIDTH_S 13
#define SDRAM_COL_WIDTH_M 0x00001E00
#define SDRAM_COL_WIDTH_S 9
#define SDRAM_ROW_WIDTH_M 0x000001E0
#define SDRAM_ROW_WIDTH_S 5
#define SDRAM_BANKADDR_BITS_M 0x00000018
#define SDRAM_BANKADDR_BITS_S 3
/*
* SPI Flash Interface Registers
*/
#define AR5315_SPI_CTL (AR5315_SPI + 0x00)
#define AR5315_SPI_OPCODE (AR5315_SPI + 0x04)
#define AR5315_SPI_DATA (AR5315_SPI + 0x08)
#define SPI_CTL_START 0x00000100
#define SPI_CTL_BUSY 0x00010000
#define SPI_CTL_TXCNT_MASK 0x0000000f
#define SPI_CTL_RXCNT_MASK 0x000000f0
#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
#define SPI_CTL_SIZE_MASK 0x00060000
#define SPI_CTL_CLK_SEL_MASK 0x03000000
#define SPI_OPCODE_MASK 0x000000ff
/*
* PCI-MAC Configuration registers
*/
#define PCI_MAC_RC (AR5315_PCI + 0x4000)
#define PCI_MAC_SCR (AR5315_PCI + 0x4004)
#define PCI_MAC_INTPEND (AR5315_PCI + 0x4008)
#define PCI_MAC_SFR (AR5315_PCI + 0x400C)
#define PCI_MAC_PCICFG (AR5315_PCI + 0x4010)
#define PCI_MAC_SREV (AR5315_PCI + 0x4020)
#define PCI_MAC_RC_MAC 0x00000001
#define PCI_MAC_RC_BB 0x00000002
#define PCI_MAC_SCR_SLMODE_M 0x00030000
#define PCI_MAC_SCR_SLMODE_S 16
#define PCI_MAC_SCR_SLM_FWAKE 0
#define PCI_MAC_SCR_SLM_FSLEEP 1
#define PCI_MAC_SCR_SLM_NORMAL 2
#define PCI_MAC_SFR_SLEEP 0x00000001
#define PCI_MAC_PCICFG_SPWR_DN 0x00010000
/*
* PCI Bus Interface Registers
*/
#define AR5315_PCI_1MS_REG (AR5315_PCI + 0x0008)
#define AR5315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
#define AR5315_PCI_MISC_CONFIG (AR5315_PCI + 0x000c)
#define AR5315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */
#define AR5315_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */
#define AR5315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */
#define AR5315_PCIMISC_RST_MODE 0x00000030
#define AR5315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */
#define AR5315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */
#define AR5315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */
#define AR5315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */
#define AR5315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */
#define AR5315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */
#define AR5315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */
#define AR5315_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */
#define AR5315_PCI_OUT_TSTAMP (AR5315_PCI + 0x0010)
#define AR5315_PCI_UNCACHE_CFG (AR5315_PCI + 0x0014)
#define AR5315_PCI_IN_EN (AR5315_PCI + 0x0100)
#define AR5315_PCI_IN_EN0 0x01 /* Enable chain 0 */
#define AR5315_PCI_IN_EN1 0x02 /* Enable chain 1 */
#define AR5315_PCI_IN_EN2 0x04 /* Enable chain 2 */
#define AR5315_PCI_IN_EN3 0x08 /* Enable chain 3 */
#define AR5315_PCI_IN_DIS (AR5315_PCI + 0x0104)
#define AR5315_PCI_IN_DIS0 0x01 /* Disable chain 0 */
#define AR5315_PCI_IN_DIS1 0x02 /* Disable chain 1 */
#define AR5315_PCI_IN_DIS2 0x04 /* Disable chain 2 */
#define AR5315_PCI_IN_DIS3 0x08 /* Disable chain 3 */
#define AR5315_PCI_IN_PTR (AR5315_PCI + 0x0200)
#define AR5315_PCI_OUT_EN (AR5315_PCI + 0x0400)
#define AR5315_PCI_OUT_EN0 0x01 /* Enable chain 0 */
#define AR5315_PCI_OUT_DIS (AR5315_PCI + 0x0404)
#define AR5315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */
#define AR5315_PCI_OUT_PTR (AR5315_PCI + 0x0408)
#define AR5315_PCI_INT_STATUS (AR5315_PCI + 0x0500) /* write one to clr */
#define AR5315_PCI_TXINT 0x00000001 /* Desc In Completed */
#define AR5315_PCI_TXOK 0x00000002 /* Desc In OK */
#define AR5315_PCI_TXERR 0x00000004 /* Desc In ERR */
#define AR5315_PCI_TXEOL 0x00000008 /* Desc In End-of-List */
#define AR5315_PCI_RXINT 0x00000010 /* Desc Out Completed */
#define AR5315_PCI_RXOK 0x00000020 /* Desc Out OK */
#define AR5315_PCI_RXERR 0x00000040 /* Desc Out ERR */
#define AR5315_PCI_RXEOL 0x00000080 /* Desc Out EOL */
#define AR5315_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */
#define AR5315_PCI_MASK 0x0000FFFF /* Desc Mask */
#define AR5315_PCI_EXT_INT 0x02000000
#define AR5315_PCI_ABORT_INT 0x04000000
#define AR5315_PCI_INT_MASK (AR5315_PCI + 0x0504) /* same as INT_STATUS */
#define AR5315_PCI_INTEN_REG (AR5315_PCI + 0x0508)
#define AR5315_PCI_INT_DISABLE 0x00 /* disable pci interrupts */
#define AR5315_PCI_INT_ENABLE 0x01 /* enable pci interrupts */
#define AR5315_PCI_HOST_IN_EN (AR5315_PCI + 0x0800)
#define AR5315_PCI_HOST_IN_DIS (AR5315_PCI + 0x0804)
#define AR5315_PCI_HOST_IN_PTR (AR5315_PCI + 0x0810)
#define AR5315_PCI_HOST_OUT_EN (AR5315_PCI + 0x0900)
#define AR5315_PCI_HOST_OUT_DIS (AR5315_PCI + 0x0904)
#define AR5315_PCI_HOST_OUT_PTR (AR5315_PCI + 0x0908)
/*
* Local Bus Interface Registers
*/
#define AR5315_LB_CONFIG (AR5315_LOCAL + 0x0000)
#define AR5315_LBCONF_OE 0x00000001 /* =1 OE is low-true */
#define AR5315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */
#define AR5315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */
#define AR5315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */
#define AR5315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */
#define AR5315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */
#define AR5315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */
#define AR5315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */
#define AR5315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */
#define AR5315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */
#define AR5315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */
#define AR5315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */
#define AR5315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */
#define AR5315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */
#define AR5315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */
#define AR5315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */
#define AR5315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */
#define AR5315_LBCONF_INT 0x00020000 /* =1 Intr is low true */
#define AR5315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */
#define AR5315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */
#define AR5315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */
#define AR5315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */
#define AR5315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */
#define AR5315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */
#define AR5315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */
#define AR5315_LB_CLKSEL (AR5315_LOCAL + 0x0004)
#define AR5315_LBCLK_EXT 0x0001 /* use external clk for lb */
#define AR5315_LB_1MS (AR5315_LOCAL + 0x0008)
#define AR5315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
#define AR5315_LB_MISCCFG (AR5315_LOCAL + 0x000C)
#define AR5315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */
#define AR5315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */
#define AR5315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */
#define AR5315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */
#define AR5315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */
#define AR5315_LBM_TIMEOUT_MASK 0x00FFFF80
#define AR5315_LBM_TIMEOUT_SHFT 7
#define AR5315_LBM_PORTMUX 0x07000000
#define AR5315_LB_RXTSOFF (AR5315_LOCAL + 0x0010)
#define AR5315_LB_TX_CHAIN_EN (AR5315_LOCAL + 0x0100)
#define AR5315_LB_TXEN_0 0x01
#define AR5315_LB_TXEN_1 0x02
#define AR5315_LB_TXEN_2 0x04
#define AR5315_LB_TXEN_3 0x08
#define AR5315_LB_TX_CHAIN_DIS (AR5315_LOCAL + 0x0104)
#define AR5315_LB_TX_DESC_PTR (AR5315_LOCAL + 0x0200)
#define AR5315_LB_RX_CHAIN_EN (AR5315_LOCAL + 0x0400)
#define AR5315_LB_RXEN 0x01
#define AR5315_LB_RX_CHAIN_DIS (AR5315_LOCAL + 0x0404)
#define AR5315_LB_RX_DESC_PTR (AR5315_LOCAL + 0x0408)
#define AR5315_LB_INT_STATUS (AR5315_LOCAL + 0x0500)
#define AR5315_INT_TX_DESC 0x0001
#define AR5315_INT_TX_OK 0x0002
#define AR5315_INT_TX_ERR 0x0004
#define AR5315_INT_TX_EOF 0x0008
#define AR5315_INT_RX_DESC 0x0010
#define AR5315_INT_RX_OK 0x0020
#define AR5315_INT_RX_ERR 0x0040
#define AR5315_INT_RX_EOF 0x0080
#define AR5315_INT_TX_TRUNC 0x0100
#define AR5315_INT_TX_STARVE 0x0200
#define AR5315_INT_LB_TIMEOUT 0x0400
#define AR5315_INT_LB_ERR 0x0800
#define AR5315_INT_MBOX_WR 0x1000
#define AR5315_INT_MBOX_RD 0x2000
/* Bit definitions for INT MASK are the same as INT_STATUS */
#define AR5315_LB_INT_MASK (AR5315_LOCAL + 0x0504)
#define AR5315_LB_INT_EN (AR5315_LOCAL + 0x0508)
#define AR5315_LB_MBOX (AR5315_LOCAL + 0x0600)
/*
* IR Interface Registers
*/
#define AR5315_IR_PKTDATA (AR5315_IR + 0x0000)
#define AR5315_IR_PKTLEN (AR5315_IR + 0x07fc) /* 0 - 63 */
#define AR5315_IR_CONTROL (AR5315_IR + 0x0800)
#define AR5315_IRCTL_TX 0x00000000 /* use as tranmitter */
#define AR5315_IRCTL_RX 0x00000001 /* use as receiver */
#define AR5315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */
#define AR5315_IRCTL_SAMPLECLK_SHFT 1
#define AR5315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */
#define AR5315_IRCTL_OUTPUTCLK_SHFT 14
#define AR5315_IR_STATUS (AR5315_IR + 0x0804)
#define AR5315_IRSTS_RX 0x00000001 /* receive in progress */
#define AR5315_IRSTS_TX 0x00000002 /* transmit in progress */
#define AR5315_IR_CONFIG (AR5315_IR + 0x0808)
#define AR5315_IRCFG_INVIN 0x00000001 /* invert input polarity */
#define AR5315_IRCFG_INVOUT 0x00000002 /* invert output polarity */
#define AR5315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */
#define AR5315_IRCFG_SEQ_START_THRESH 0x000000f0 /* */
#define AR5315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */
#define AR5315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */
#define AR5315_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */
#define AR5315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */
#define AR5315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */
/*
* PCI memory constants: Memory area 1 and 2 are the same size -
* (twice the PCI_TLB_PAGE_SIZE). The definition of
* CPU_TO_PCI_MEM_SIZE is coupled with the TLB setup routine
* sysLib.c/sysTlbInit(), in that it assumes that 2 pages of size
* PCI_TLB_PAGE_SIZE are set up in the TLB for each PCI memory space.
*/
#define CPU_TO_PCI_MEM_BASE1 0xE0000000
#define CPU_TO_PCI_MEM_SIZE1 (2*PCI_TLB_PAGE_SIZE)
/* TLB attributes for PCI transactions */
#define PCI_MMU_PAGEMASK 0x00003FFF
#define MMU_PAGE_UNCACHED 0x00000010
#define MMU_PAGE_DIRTY 0x00000004
#define MMU_PAGE_VALID 0x00000002
#define MMU_PAGE_GLOBAL 0x00000001
#define PCI_MMU_PAGEATTRIB (MMU_PAGE_UNCACHED|MMU_PAGE_DIRTY|\
MMU_PAGE_VALID|MMU_PAGE_GLOBAL)
#define PCI_MEMORY_SPACE1_VIRT 0xE0000000 /* Used for non-prefet mem */
#define PCI_MEMORY_SPACE1_PHYS 0x80000000
#define PCI_TLB_PAGE_SIZE 0x01000000
#define TLB_HI_MASK 0xFFFFE000
#define TLB_LO_MASK 0x3FFFFFFF
#define PAGEMASK_SHIFT 11
#define TLB_LO_SHIFT 6
#define PCI_MAX_LATENCY 0xFFF /* Max PCI latency */
#define HOST_PCI_DEV_ID 3
#define HOST_PCI_MBAR0 0x10000000
#define HOST_PCI_MBAR1 0x20000000
#define HOST_PCI_MBAR2 0x30000000
#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
#define PCI_DEVICE_MEM_SPACE 0x800000
#endif

149
target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x.h
View File

@ -1,149 +0,0 @@
#ifndef __AR531X_H
#define __AR531X_H
#include <linux/version.h>
#include <asm/cpu-info.h>
#include <ar531x_platform.h>
#include <ar5312/ar5312.h>
#include <ar5315/ar5315.h>
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24))
extern void (*board_time_init)(void);
#endif
/*
* Atheros CPUs before the AR2315 are using MIPS 4Kc core, later designs are
* using MIPS 4KEc R2 core. This makes it easy to determine the board at runtime.
*/
#ifdef CONFIG_ATHEROS_AR5312
#define DO_AR5312(...) \
if (current_cpu_data.cputype != CPU_4KEC) { \
__VA_ARGS__ \
}
#else
#define DO_AR5312(...)
#endif
#ifdef CONFIG_ATHEROS_AR5315
#define DO_AR5315(...) \
if (current_cpu_data.cputype == CPU_4KEC) { \
__VA_ARGS__ \
}
#else
#define DO_AR5315(...)
#endif
#define AR531X_MISC_IRQ_BASE 0x20
#define AR531X_GPIO_IRQ_BASE 0x30
/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0
#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
/* Miscellaneous interrupts, which share IP6 */
#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0
#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1
#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2
#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3
#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4
#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5
#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6
#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7
#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8
#define AR531X_MISC_IRQ_SPI AR531X_MISC_IRQ_BASE+9
#define AR531X_MISC_IRQ_COUNT 10
/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
#define AR531X_GPIO_IRQ_NONE AR531X_GPIO_IRQ_BASE+0
#define AR531X_GPIO_IRQ(n) AR531X_GPIO_IRQ_BASE+n
#define AR531X_GPIO_IRQ_COUNT 22
#define sysRegRead(phys) \
(*(volatile u32 *)KSEG1ADDR(phys))
#define sysRegWrite(phys, val) \
((*(volatile u32 *)KSEG1ADDR(phys)) = (val))
/*
* This is board-specific data that is stored in a "fixed" location in flash.
* It is shared across operating systems, so it should not be changed lightly.
* The main reason we need it is in order to extract the ethernet MAC
* address(es).
*/
struct ar531x_boarddata {
u32 magic; /* board data is valid */
#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
u16 cksum; /* checksum (starting with BD_REV 2) */
u16 rev; /* revision of this struct */
#define BD_REV 4
char boardName[64]; /* Name of board */
u16 major; /* Board major number */
u16 minor; /* Board minor number */
u32 config; /* Board configuration */
#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
#define BD_UART1 0x00000004 /* UART1 is stuffed */
#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
#define BD_SYSLED 0x00000020 /* System LED stuffed */
#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
u16 resetConfigGpio; /* Reset factory GPIO pin */
u16 sysLedGpio; /* System LED GPIO pin */
u32 cpuFreq; /* CPU core frequency in Hz */
u32 sysFreq; /* System frequency in Hz */
u32 cntFreq; /* Calculated C0_COUNT frequency */
u8 wlan0Mac[6];
u8 enet0Mac[6];
u8 enet1Mac[6];
u16 pciId; /* Pseudo PCIID for common code */
u16 memCap; /* cap bank1 in MB */
/* version 3 */
u8 wlan1Mac[6]; /* (ar5212) */
};
#define BOARD_CONFIG_BUFSZ 0x1000
extern char *board_config, *radio_config;
extern void serial_setup(unsigned long mapbase, unsigned int uartclk);
extern int ar531x_find_config(char *flash_limit);
extern void ar5312_prom_init(void);
extern void ar5312_misc_intr_init(int irq_base);
extern void ar5312_plat_setup(void);
extern asmlinkage void ar5312_irq_dispatch(void);
extern void ar5315_prom_init(void);
extern void ar5315_misc_intr_init(int irq_base);
extern void ar5315_plat_setup(void);
extern asmlinkage void ar5315_irq_dispatch(void);
extern void ar5315_pci_irq(int irq);
static inline u32 sysRegMask(u32 phys, u32 mask, u32 value)
{
u32 reg;
reg = sysRegRead(phys);
reg &= ~mask;
reg |= value & mask;
sysRegWrite(phys, reg);
reg = sysRegRead(phys); /* flush write to the hardware */
return reg;
}
#define AR531X_NUM_GPIO 8
#endif

28
target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x_platform.h
View File

@ -1,28 +0,0 @@
#ifndef __AR531X_PLATFORM_H
#define __AR531X_PLATFORM_H
/*
* Board support data. The driver is required to locate
* and fill-in this information before passing a reference to
* this structure as the HAL_BUS_TAG parameter supplied to
* ath_hal_attach.
*/
struct ar531x_config {
const char *board; /* board config data */
const char *radio; /* radio config data */
int unit; /* unit number [0, 1] */
u32 tag; /* used as devid for now */
};
struct ar531x_eth {
int phy;
int mac;
u32 reset_base;
u32 reset_mac;
u32 reset_phy;
u32 phy_base;
char *board_config;
char *macaddr;
};
#endif /* __AR531X_PLATFORM_H */

84
target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/cpu-feature-overrides.h
View File

@ -1,84 +0,0 @@
/*
* Atheros SoC specific CPU feature overrides
*
* Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
*
* This file was derived from: include/asm-mips/cpu-features.h
* Copyright (C) 2003, 2004 Ralf Baechle
* Copyright (C) 2004 Maciej W. Rozycki
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
*/
#ifndef __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
#define __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
/*
* The ATHEROS SoCs have MIPS 4Kc/4KEc core.
*/
#define cpu_has_tlb 1
#define cpu_has_4kex 1
#define cpu_has_3k_cache 0
#define cpu_has_4k_cache 1
#define cpu_has_tx39_cache 0
#define cpu_has_sb1_cache 0
#define cpu_has_fpu 0
#define cpu_has_32fpr 0
#define cpu_has_counter 1
/* #define cpu_has_watch ? */
/* #define cpu_has_divec ? */
/* #define cpu_has_vce ? */
/* #define cpu_has_cache_cdex_p ? */
/* #define cpu_has_cache_cdex_s ? */
/* #define cpu_has_prefetch ? */
/* #define cpu_has_mcheck ? */
#define cpu_has_ejtag 1
#if !defined(CONFIG_ATHEROS_AR5312)
# define cpu_has_llsc 1
#else
/*
* The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the
* ll/sc instructions.
*/
# define cpu_has_llsc 0
#endif
#define cpu_has_mips16 0
#define cpu_has_mdmx 0
#define cpu_has_mips3d 0
#define cpu_has_smartmips 0
/* #define cpu_has_vtag_icache ? */
/* #define cpu_has_dc_aliases ? */
/* #define cpu_has_ic_fills_f_dc ? */
/* #define cpu_has_pindexed_dcache ? */
/* #define cpu_icache_snoops_remote_store ? */
#define cpu_has_mips32r1 1
#if !defined(CONFIG_ATHEROS_AR5312)
# define cpu_has_mips32r2 1
#endif
#define cpu_has_mips64r1 0
#define cpu_has_mips64r2 0
#define cpu_has_dsp 0
#define cpu_has_mipsmt 0
/* #define cpu_has_nofpuex ? */
#define cpu_has_64bits 0
#define cpu_has_64bit_zero_reg 0
#define cpu_has_64bit_gp_regs 0
#define cpu_has_64bit_addresses 0
/* #define cpu_has_inclusive_pcaches ? */
/* #define cpu_dcache_line_size() ? */
/* #define cpu_icache_line_size() ? */
#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */

41
target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/dma-coherence.h
View File

@ -1,41 +0,0 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
* Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
*
*/
#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
#define PCI_DMA_OFFSET 0x20000000
struct device;
static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
{
return virt_to_phys(addr) + (dev != NULL ? PCI_DMA_OFFSET : 0);
}
static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
{
return page_to_phys(page) + (dev != NULL ? PCI_DMA_OFFSET : 0);
}
static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
{
return (dma_addr > PCI_DMA_OFFSET ? dma_addr - PCI_DMA_OFFSET : dma_addr);
}
static void plat_unmap_dma_mem(dma_addr_t dma_addr)
{
}
static inline int plat_device_is_coherent(struct device *dev)
{
return 0;
}
#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */

118
target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/gpio.h
View File

@ -1,118 +0,0 @@
#ifndef _ATHEROS_GPIO_H_
#define _ATHEROS_GPIO_H_
#include "ar531x.h"
/* Common AR531X global variables */
/* extern u32 ar531x_gpio_intr_Mask; */
/* AR5312 exported routines */
#ifdef CONFIG_ATHEROS_AR5312
asmlinkage void ar5312_gpio_irq_dispatch(void);
#endif
/* AR5315 exported routines */
#ifdef CONFIG_ATHEROS_AR5315
asmlinkage void ar5315_gpio_irq_dispatch(void);
#endif
/*
* Wrappers for the generic GPIO layer
*/
/* Sets a gpio to input, or returns ENXIO for non-existent gpio */
static inline int gpio_direction_input(unsigned gpio) {
DO_AR5312( if (gpio > AR531X_NUM_GPIO) { \
return -ENXIO; \
} else { \
sysRegWrite(AR531X_GPIO_CR, \
sysRegRead(AR531X_GPIO_CR) | \
AR531X_GPIO_CR_I(gpio) ); \
return 0; \
} \
)
DO_AR5315( if (gpio > AR5315_NUM_GPIO) { \
return -ENXIO; \
} else { \
sysRegWrite(AR5315_GPIO_CR, \
( sysRegRead(AR5315_GPIO_CR) & \
~(AR5315_GPIO_CR_M(gpio)) ) | \
AR5315_GPIO_CR_I(gpio) ); \
return 0; \
} \
)
return -ENXIO;
}
/* Sets a gpio to output with value, or returns ENXIO for non-existent gpio */
static inline int gpio_direction_output(unsigned gpio, int value) {
DO_AR5312( if (gpio > AR531X_NUM_GPIO) { \
return -ENXIO; \
} else { \
sysRegWrite(AR531X_GPIO_DO, \
( (sysRegRead(AR531X_GPIO_DO) & \
~(1 << gpio) ) | \
((value!=0) << gpio)) ); \
sysRegWrite(AR531X_GPIO_CR, \
( sysRegRead(AR531X_GPIO_CR) & \
~(AR531X_GPIO_CR_M(gpio)) )); \
return 0; \
} \
)
DO_AR5315( if (gpio > AR5315_NUM_GPIO) { \
return -ENXIO; \
} else { \
sysRegWrite(AR5315_GPIO_DO, \
( (sysRegRead(AR5315_GPIO_DO) & \
~(1 << gpio)) | \
((value!=0) << gpio)) ); \
sysRegWrite(AR5315_GPIO_CR, \
sysRegRead(AR5315_GPIO_CR) | \
AR5315_GPIO_CR_O(gpio) ); \
return 0; \
} \
)
return -ENXIO;
}
/* Reads the gpio pin. Unchecked function */
static inline int gpio_get_value(unsigned gpio) {
DO_AR5312(return (sysRegRead(AR531X_GPIO_DI) & (1 << gpio));)
DO_AR5315(return (sysRegRead(AR5315_GPIO_DI) & (1 << gpio));)
return 0;
}
/* Writes to the gpio pin. Unchecked function */
static inline void gpio_set_value(unsigned gpio, int value) {
DO_AR5312( sysRegWrite(AR531X_GPIO_DO, \
( (sysRegRead(AR531X_GPIO_DO) & \
~(1 << gpio)) | \
((value!=0) << gpio)) ); \
)
DO_AR5315( sysRegWrite(AR5315_GPIO_DO, \
( (sysRegRead(AR5315_GPIO_DO) & \
~(1 << gpio)) | \
((value!=0) << gpio)) ); \
)
}
static inline int gpio_request(unsigned gpio, const char *label) {
return 0;
}
static inline void gpio_free(unsigned gpio) {
}
/* Returns IRQ to attach for gpio. Unchecked function */
static inline int gpio_to_irq(unsigned gpio) {
return AR531X_GPIO_IRQ(gpio);
}
/* Returns gpio for IRQ attached. Unchecked function */
static inline int irq_to_gpio(unsigned irq) {
return (irq - (AR531X_GPIO_IRQ(0)));
}
#include <asm-generic/gpio.h> /* cansleep wrappers */
#endif

6
target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/reset.h
View File

@ -1,6 +0,0 @@
#ifndef __AR531X_RESET_H
#define __AR531X_RESET_H
void ar531x_disable_reset_button(void);
#endif /* __AR531X_RESET_H */

25
target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/war.h
View File

@ -1,25 +0,0 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
*/
#ifndef __ASM_MIPS_MACH_ATHEROS_WAR_H
#define __ASM_MIPS_MACH_ATHEROS_WAR_H
#define R4600_V1_INDEX_ICACHEOP_WAR 0
#define R4600_V1_HIT_CACHEOP_WAR 0
#define R4600_V2_HIT_CACHEOP_WAR 0
#define R5432_CP0_INTERRUPT_WAR 0
#define BCM1250_M3_WAR 0
#define SIBYTE_1956_WAR 0
#define MIPS4K_ICACHE_REFILL_WAR 0
#define MIPS_CACHE_SYNC_WAR 0
#define TX49XX_ICACHE_INDEX_INV_WAR 0
#define RM9000_CDEX_SMP_WAR 0
#define ICACHE_REFILLS_WORKAROUND_WAR 0
#define R10000_LLSC_WAR 0
#define MIPS34K_MISSED_ITLB_WAR 0
#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */

533
target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.c
View File

@ -1,533 +0,0 @@
/*
* MTD driver for the SPI Flash Memory support.
*
* Copyright (c) 2005-2006 Atheros Communications Inc.
* Copyright (C) 2006-2007 FON Technology, SL.
* Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org>
* Copyright (C) 2006-2007 Felix Fietkau <nbd@openwrt.org>
*
* This code is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
/*===========================================================================
** !!!! VERY IMPORTANT NOTICE !!!! FLASH DATA STORED IN LITTLE ENDIAN FORMAT
**
** This module contains the Serial Flash access routines for the Atheros SOC.
** The Atheros SOC integrates a SPI flash controller that is used to access
** serial flash parts. The SPI flash controller executes in "Little Endian"
** mode. THEREFORE, all WRITES and READS from the MIPS CPU must be
** BYTESWAPPED! The SPI Flash controller hardware by default performs READ
** ONLY byteswapping when accessed via the SPI Flash Alias memory region
** (Physical Address 0x0800_0000 - 0x0fff_ffff). The data stored in the
** flash sectors is stored in "Little Endian" format.
**
** The spiflash_write() routine performs byteswapping on all write
** operations.
**===========================================================================*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/version.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/squashfs_fs.h>
#include <linux/root_dev.h>
#include <linux/delay.h>
#include <asm/delay.h>
#include <asm/io.h>
#include "spiflash.h"
#ifndef __BIG_ENDIAN
#error This driver currently only works with big endian CPU.
#endif
#define MAX_PARTS 32
#define SPIFLASH "spiflash: "
#define MIN(a,b) ((a) < (b) ? (a) : (b))
#define busy_wait(condition, wait) \
do { \
while (condition) { \
spin_unlock_bh(&spidata->mutex); \
if (wait > 1) \
msleep(wait); \
else if ((wait == 1) && need_resched()) \
schedule(); \
else \
udelay(1); \
spin_lock_bh(&spidata->mutex); \
} \
} while (0)
static __u32 spiflash_regread32(int reg);
static void spiflash_regwrite32(int reg, __u32 data);
static __u32 spiflash_sendcmd (int op, u32 addr);
int __init spiflash_init (void);
void __exit spiflash_exit (void);
static int spiflash_probe_chip (void);
static int spiflash_erase (struct mtd_info *mtd,struct erase_info *instr);
static int spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf);
static int spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf);
/* Flash configuration table */
struct flashconfig {
__u32 byte_cnt;
__u32 sector_cnt;
__u32 sector_size;
__u32 cs_addrmask;
} flashconfig_tbl[MAX_FLASH] =
{
{ 0, 0, 0, 0},
{ STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE, 0x0},
{ STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE, 0x0},
{ STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE, 0x0},
{ STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE, 0x0},
{ STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, STM_16MB_SECTOR_SIZE, 0x0}
};
/* Mapping of generic opcodes to STM serial flash opcodes */
#define SPI_WRITE_ENABLE 0
#define SPI_WRITE_DISABLE 1
#define SPI_RD_STATUS 2
#define SPI_WR_STATUS 3
#define SPI_RD_DATA 4
#define SPI_FAST_RD_DATA 5
#define SPI_PAGE_PROGRAM 6
#define SPI_SECTOR_ERASE 7
#define SPI_BULK_ERASE 8
#define SPI_DEEP_PWRDOWN 9
#define SPI_RD_SIG 10
#define SPI_MAX_OPCODES 11
struct opcodes {
__u16 code;
__s8 tx_cnt;
__s8 rx_cnt;
} stm_opcodes[] = {
{STM_OP_WR_ENABLE, 1, 0},
{STM_OP_WR_DISABLE, 1, 0},
{STM_OP_RD_STATUS, 1, 1},
{STM_OP_WR_STATUS, 1, 0},
{STM_OP_RD_DATA, 4, 4},
{STM_OP_FAST_RD_DATA, 5, 0},
{STM_OP_PAGE_PGRM, 8, 0},
{STM_OP_SECTOR_ERASE, 4, 0},
{STM_OP_BULK_ERASE, 1, 0},
{STM_OP_DEEP_PWRDOWN, 1, 0},
{STM_OP_RD_SIG, 4, 1},
};
/* Driver private data structure */
struct spiflash_data {
struct mtd_info *mtd;
struct mtd_partition *parsed_parts; /* parsed partitions */
void *readaddr; /* memory mapped data for read */
void *mmraddr; /* memory mapped register space */
wait_queue_head_t wq;
spinlock_t mutex;
int state;
};
enum {
FL_READY,
FL_READING,
FL_ERASING,
FL_WRITING
};
static struct spiflash_data *spidata;
extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
/***************************************************************************************************/
static __u32
spiflash_regread32(int reg)
{
volatile __u32 *data = (__u32 *)(spidata->mmraddr + reg);
return (*data);
}
static void
spiflash_regwrite32(int reg, __u32 data)
{
volatile __u32 *addr = (__u32 *)(spidata->mmraddr + reg);
*addr = data;
return;
}
static __u32
spiflash_sendcmd (int op, u32 addr)
{
u32 reg;
u32 mask;
struct opcodes *ptr_opcode;
ptr_opcode = &stm_opcodes[op];
busy_wait((reg = spiflash_regread32(SPI_FLASH_CTL)) & SPI_CTL_BUSY, 0);
spiflash_regwrite32(SPI_FLASH_OPCODE, ((u32) ptr_opcode->code) | (addr << 8));
reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt |
(ptr_opcode->rx_cnt << 4) | SPI_CTL_START;
spiflash_regwrite32(SPI_FLASH_CTL, reg);
busy_wait(spiflash_regread32(SPI_FLASH_CTL) & SPI_CTL_BUSY, 0);
if (!ptr_opcode->rx_cnt)
return 0;
reg = (__u32) spiflash_regread32(SPI_FLASH_DATA);
switch (ptr_opcode->rx_cnt) {
case 1:
mask = 0x000000ff;
break;
case 2:
mask = 0x0000ffff;
break;
case 3:
mask = 0x00ffffff;
break;
default:
mask = 0xffffffff;
break;
}
reg &= mask;
return reg;
}
/* Probe SPI flash device
* Function returns 0 for failure.
* and flashconfig_tbl array index for success.
*/
static int
spiflash_probe_chip (void)
{
__u32 sig;
int flash_size;
/* Read the signature on the flash device */
spin_lock_bh(&spidata->mutex);
sig = spiflash_sendcmd(SPI_RD_SIG, 0);
spin_unlock_bh(&spidata->mutex);
switch (sig) {
case STM_8MBIT_SIGNATURE:
flash_size = FLASH_1MB;
break;
case STM_16MBIT_SIGNATURE:
flash_size = FLASH_2MB;
break;
case STM_32MBIT_SIGNATURE:
flash_size = FLASH_4MB;
break;
case STM_64MBIT_SIGNATURE:
flash_size = FLASH_8MB;
break;
case STM_128MBIT_SIGNATURE:
flash_size = FLASH_16MB;
break;
default:
printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n");
return (0);
}
return (flash_size);
}
/* wait until the flash chip is ready and grab a lock */
static int spiflash_wait_ready(int state)
{
DECLARE_WAITQUEUE(wait, current);
retry:
spin_lock_bh(&spidata->mutex);
if (spidata->state != FL_READY) {
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&spidata->wq, &wait);
spin_unlock_bh(&spidata->mutex);
schedule();
remove_wait_queue(&spidata->wq, &wait);
if(signal_pending(current))
return 0;
goto retry;
}
spidata->state = state;
return 1;
}
static inline void spiflash_done(void)
{
spidata->state = FL_READY;
spin_unlock_bh(&spidata->mutex);
wake_up(&spidata->wq);
}
static int
spiflash_erase (struct mtd_info *mtd,struct erase_info *instr)
{
struct opcodes *ptr_opcode;
u32 temp, reg;
/* sanity checks */
if (instr->addr + instr->len > mtd->size) return (-EINVAL);
if (!spiflash_wait_ready(FL_ERASING))
return -EINTR;
spiflash_sendcmd(SPI_WRITE_ENABLE, 0);
busy_wait((reg = spiflash_regread32(SPI_FLASH_CTL)) & SPI_CTL_BUSY, 0);
reg = spiflash_regread32(SPI_FLASH_CTL);
ptr_opcode = &stm_opcodes[SPI_SECTOR_ERASE];
temp = ((__u32)instr->addr << 8) | (__u32)(ptr_opcode->code);
spiflash_regwrite32(SPI_FLASH_OPCODE, temp);
reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt | SPI_CTL_START;
spiflash_regwrite32(SPI_FLASH_CTL, reg);
/* this will take some time */
spin_unlock_bh(&spidata->mutex);
msleep(800);
spin_lock_bh(&spidata->mutex);
busy_wait(spiflash_sendcmd(SPI_RD_STATUS, 0) & SPI_STATUS_WIP, 20);
spiflash_done();
instr->state = MTD_ERASE_DONE;
if (instr->callback) instr->callback (instr);
return 0;
}
static int
spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf)
{
u8 *read_addr;
/* sanity checks */
if (!len) return (0);
if (from + len > mtd->size) return (-EINVAL);
/* we always read len bytes */
*retlen = len;
if (!spiflash_wait_ready(FL_READING))
return -EINTR;
read_addr = (u8 *)(spidata->readaddr + from);
memcpy(buf, read_addr, len);
spiflash_done();
return 0;
}
static int
spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf)
{
u32 opcode, bytes_left;
*retlen = 0;
/* sanity checks */
if (!len) return (0);
if (to + len > mtd->size) return (-EINVAL);
opcode = stm_opcodes[SPI_PAGE_PROGRAM].code;
bytes_left = len;
do {
u32 xact_len, reg, page_offset, spi_data = 0;
xact_len = MIN(bytes_left, sizeof(__u32));
/* 32-bit writes cannot span across a page boundary
* (256 bytes). This types of writes require two page
* program operations to handle it correctly. The STM part
* will write the overflow data to the beginning of the
* current page as opposed to the subsequent page.
*/
page_offset = (to & (STM_PAGE_SIZE - 1)) + xact_len;
if (page_offset > STM_PAGE_SIZE) {
xact_len -= (page_offset - STM_PAGE_SIZE);
}
if (!spiflash_wait_ready(FL_WRITING))
return -EINTR;
spiflash_sendcmd(SPI_WRITE_ENABLE, 0);
switch (xact_len) {
case 1:
spi_data = (u32) ((u8) *buf);
break;
case 2:
spi_data = (buf[1] << 8) | buf[0];
break;
case 3:
spi_data = (buf[2] << 16) | (buf[1] << 8) | buf[0];
break;
case 4:
spi_data = (buf[3] << 24) | (buf[2] << 16) |
(buf[1] << 8) | buf[0];
break;
default:
spi_data = 0;
break;
}
spiflash_regwrite32(SPI_FLASH_DATA, spi_data);
opcode = (opcode & SPI_OPCODE_MASK) | ((__u32)to << 8);
spiflash_regwrite32(SPI_FLASH_OPCODE, opcode);
reg = spiflash_regread32(SPI_FLASH_CTL);
reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | (xact_len + 4) | SPI_CTL_START;
spiflash_regwrite32(SPI_FLASH_CTL, reg);
/* give the chip some time before we start busy waiting */
spin_unlock_bh(&spidata->mutex);
schedule();
spin_lock_bh(&spidata->mutex);
busy_wait(spiflash_sendcmd(SPI_RD_STATUS, 0) & SPI_STATUS_WIP, 0);
spiflash_done();
bytes_left -= xact_len;
to += xact_len;
buf += xact_len;
*retlen += xact_len;
} while (bytes_left != 0);
return 0;
}
#ifdef CONFIG_MTD_PARTITIONS
static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "MyLoader", NULL };
#endif
static int spiflash_probe(struct platform_device *pdev)
{
int result = -1;
int index, num_parts;
struct mtd_info *mtd;
spidata->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE);
spin_lock_init(&spidata->mutex);
init_waitqueue_head(&spidata->wq);
spidata->state = FL_READY;
if (!spidata->mmraddr) {
printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
kfree(spidata);
spidata = NULL;
}
mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
if (!mtd) {
kfree(spidata);
return -ENXIO;
}
if (!(index = spiflash_probe_chip())) {
printk (KERN_WARNING SPIFLASH "Found no serial flash device\n");
goto error;
}
spidata->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt);
if (!spidata->readaddr) {
printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
goto error;
}
mtd->name = "spiflash";
mtd->type = MTD_NORFLASH;
mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
mtd->size = flashconfig_tbl[index].byte_cnt;
mtd->erasesize = flashconfig_tbl[index].sector_size;
mtd->writesize = 1;
mtd->numeraseregions = 0;
mtd->eraseregions = NULL;
mtd->erase = spiflash_erase;
mtd->read = spiflash_read;
mtd->write = spiflash_write;
mtd->owner = THIS_MODULE;
/* parse redboot partitions */
num_parts = parse_mtd_partitions(mtd, part_probe_types, &spidata->parsed_parts, 0);
if (!num_parts)
goto error;
result = add_mtd_partitions(mtd, spidata->parsed_parts, num_parts);
spidata->mtd = mtd;
return (result);
error:
kfree(mtd);
kfree(spidata);
return -ENXIO;
}
static int spiflash_remove (struct platform_device *pdev)
{
del_mtd_partitions (spidata->mtd);
kfree(spidata->mtd);
return 0;
}
struct platform_driver spiflash_driver = {
.driver.name = "spiflash",
.probe = spiflash_probe,
.remove = spiflash_remove,
};
int __init
spiflash_init (void)
{
spidata = kmalloc(sizeof(struct spiflash_data), GFP_KERNEL);
if (!spidata)
return (-ENXIO);
spin_lock_init(&spidata->mutex);
platform_driver_register(&spiflash_driver);
return 0;
}
void __exit
spiflash_exit (void)
{
kfree(spidata);
}
module_init (spiflash_init);
module_exit (spiflash_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc");
MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC");

120
target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.h
View File

@ -1,120 +0,0 @@
/*
* SPI Flash Memory support header file.
*
* $Id: //depot/sw/releases/linuxsrc/src/kernels/mips-linux-2.4.25/drivers/mtd/devices/spiflash.h#3 $
*
*
* Copyright (c) 2005, Atheros Communications Inc.
* Copyright (C) 2006 FON Technology, SL.
* Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
*
* This code is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#define FLASH_1MB 1
#define FLASH_2MB 2
#define FLASH_4MB 3
#define FLASH_8MB 4
#define FLASH_16MB 5
#define MAX_FLASH 6
#define STM_PAGE_SIZE 256
#define SFI_WRITE_BUFFER_SIZE 4
#define SFI_FLASH_ADDR_MASK 0x00ffffff
#define STM_8MBIT_SIGNATURE 0x13
#define STM_M25P80_BYTE_COUNT 1048576
#define STM_M25P80_SECTOR_COUNT 16
#define STM_M25P80_SECTOR_SIZE 0x10000
#define STM_16MBIT_SIGNATURE 0x14
#define STM_M25P16_BYTE_COUNT 2097152
#define STM_M25P16_SECTOR_COUNT 32
#define STM_M25P16_SECTOR_SIZE 0x10000
#define STM_32MBIT_SIGNATURE 0x15
#define STM_M25P32_BYTE_COUNT 4194304
#define STM_M25P32_SECTOR_COUNT 64
#define STM_M25P32_SECTOR_SIZE 0x10000
#define STM_64MBIT_SIGNATURE 0x16
#define STM_M25P64_BYTE_COUNT 8388608
#define STM_M25P64_SECTOR_COUNT 128
#define STM_M25P64_SECTOR_SIZE 0x10000
#define STM_128MBIT_SIGNATURE 0x17
#define STM_M25P128_BYTE_COUNT 16777216
#define STM_M25P128_SECTOR_COUNT 256
#define STM_M25P128_SECTOR_SIZE 0x10000
#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT
#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE
#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT
#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE
#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT
#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE
#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT
#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE
#define STM_16MB_BYTE_COUNT STM_M25P128_BYTE_COUNT
#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT
#define STM_16MB_SECTOR_SIZE STM_M25P128_SECTOR_SIZE
/*
* ST Microelectronics Opcodes for Serial Flash
*/
#define STM_OP_WR_ENABLE 0x06 /* Write Enable */
#define STM_OP_WR_DISABLE 0x04 /* Write Disable */
#define STM_OP_RD_STATUS 0x05 /* Read Status */
#define STM_OP_WR_STATUS 0x01 /* Write Status */
#define STM_OP_RD_DATA 0x03 /* Read Data */
#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */
#define STM_OP_PAGE_PGRM 0x02 /* Page Program */
#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */
#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */
#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */
#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */
#define STM_STATUS_WIP 0x01 /* Write-In-Progress */
#define STM_STATUS_WEL 0x02 /* Write Enable Latch */
#define STM_STATUS_BP0 0x04 /* Block Protect 0 */
#define STM_STATUS_BP1 0x08 /* Block Protect 1 */
#define STM_STATUS_BP2 0x10 /* Block Protect 2 */
#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */
/*
* SPI Flash Interface Registers
*/
#define AR531XPLUS_SPI_READ 0x08000000
#define AR531XPLUS_SPI_MMR 0x11300000
#define AR531XPLUS_SPI_MMR_SIZE 12
#define AR531XPLUS_SPI_CTL 0x00
#define AR531XPLUS_SPI_OPCODE 0x04
#define AR531XPLUS_SPI_DATA 0x08
#define SPI_FLASH_READ AR531XPLUS_SPI_READ
#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR
#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE
#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL
#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE
#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA
#define SPI_CTL_START 0x00000100
#define SPI_CTL_BUSY 0x00010000
#define SPI_CTL_TXCNT_MASK 0x0000000f
#define SPI_CTL_RXCNT_MASK 0x000000f0
#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
#define SPI_CTL_SIZE_MASK 0x00060000
#define SPI_CTL_CLK_SEL_MASK 0x03000000
#define SPI_OPCODE_MASK 0x000000ff
#define SPI_STATUS_WIP STM_STATUS_WIP

5
target/linux/atheros/files-2.6.28/drivers/net/ar2313/Makefile
View File

@ -1,5 +0,0 @@
#
# Makefile for the AR2313 ethernet driver
#
obj-$(CONFIG_AR2313) += ar2313.o

1409
target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.c
View File

File diff suppressed because it is too large Load Diff

195
target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.h
View File

@ -1,195 +0,0 @@
#ifndef _AR2313_H_
#define _AR2313_H_
#include <linux/autoconf.h>
#include <asm/bootinfo.h>
#include <ar531x_platform.h>
/*
* probe link timer - 5 secs
*/
#define LINK_TIMER (5*HZ)
#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0)
#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0)
#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0)
#define AR2313_TX_TIMEOUT (HZ/4)
/*
* Rings
*/
#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc))
#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
static inline int tx_space(u32 csm, u32 prd)
{
return (csm - prd - 1) & (AR2313_DESCR_ENTRIES - 1);
}
#if MAX_SKB_FRAGS
#define TX_RESERVED (MAX_SKB_FRAGS+1) /* +1 for message header */
#define tx_ring_full(csm, prd) (tx_space(csm, prd) <= TX_RESERVED)
#else
#define tx_ring_full 0
#endif
#define AR2313_MBGET 2
#define AR2313_MBSET 3
#define AR2313_PCI_RECONFIG 4
#define AR2313_PCI_DUMP 5
#define AR2313_TEST_PANIC 6
#define AR2313_TEST_NULLPTR 7
#define AR2313_READ_DATA 8
#define AR2313_WRITE_DATA 9
#define AR2313_GET_VERSION 10
#define AR2313_TEST_HANG 11
#define AR2313_SYNC 12
//
// New Combo structure for Both Eth0 AND eth1
//
typedef struct {
volatile unsigned int mac_control; /* 0x00 */
volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */
volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */
volatile unsigned int mii_addr; /* 0x14 */
volatile unsigned int mii_data; /* 0x18 */
volatile unsigned int flow_control; /* 0x1c */
volatile unsigned int vlan_tag; /* 0x20 */
volatile unsigned int pad[7]; /* 0x24 - 0x3c */
volatile unsigned int ucast_table[8]; /* 0x40-0x5c */
} ETHERNET_STRUCT;
/********************************************************************
* Interrupt controller
********************************************************************/
typedef struct {
volatile unsigned int wdog_control; /* 0x08 */
volatile unsigned int wdog_timer; /* 0x0c */
volatile unsigned int misc_status; /* 0x10 */
volatile unsigned int misc_mask; /* 0x14 */
volatile unsigned int global_status; /* 0x18 */
volatile unsigned int reserved; /* 0x1c */
volatile unsigned int reset_control; /* 0x20 */
} INTERRUPT;
/********************************************************************
* DMA controller
********************************************************************/
typedef struct {
volatile unsigned int bus_mode; /* 0x00 (CSR0) */
volatile unsigned int xmt_poll; /* 0x04 (CSR1) */
volatile unsigned int rcv_poll; /* 0x08 (CSR2) */
volatile unsigned int rcv_base; /* 0x0c (CSR3) */
volatile unsigned int xmt_base; /* 0x10 (CSR4) */
volatile unsigned int status; /* 0x14 (CSR5) */
volatile unsigned int control; /* 0x18 (CSR6) */
volatile unsigned int intr_ena; /* 0x1c (CSR7) */
volatile unsigned int rcv_missed; /* 0x20 (CSR8) */
volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */
volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */
volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
} DMA;
/*
* Struct private for the Sibyte.
*
* Elements are grouped so variables used by the tx handling goes
* together, and will go into the same cache lines etc. in order to
* avoid cache line contention between the rx and tx handling on SMP.
*
* Frequently accessed variables are put at the beginning of the
* struct to help the compiler generate better/shorter code.
*/
struct ar2313_private {
struct net_device *dev;
int version;
u32 mb[2];
volatile ETHERNET_STRUCT *phy_regs;
volatile ETHERNET_STRUCT *eth_regs;
volatile DMA *dma_regs;
volatile u32 *int_regs;
struct ar531x_eth *cfg;
spinlock_t lock; /* Serialise access to device */
/*
* RX and TX descriptors, must be adjacent
*/
ar2313_descr_t *rx_ring;
ar2313_descr_t *tx_ring;
struct sk_buff **rx_skb;
struct sk_buff **tx_skb;
/*
* RX elements
*/
u32 rx_skbprd;
u32 cur_rx;
/*
* TX elements
*/
u32 tx_prd;
u32 tx_csm;
/*
* Misc elements
*/
int board_idx;
char name[48];
struct {
u32 address;
u32 length;
char *mapping;
} desc;
struct timer_list link_timer;
unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */
unsigned short mac;
unsigned short link; /* 0 - link down, 1 - link up */
u16 phyData;
struct tasklet_struct rx_tasklet;
int unloading;
struct phy_device *phy_dev;
struct mii_bus mii_bus;
int oldduplex;
};
/*
* Prototypes
*/
static int ar2313_init(struct net_device *dev);
#ifdef TX_TIMEOUT
static void ar2313_tx_timeout(struct net_device *dev);
#endif
#if 0
static void ar2313_multicast_list(struct net_device *dev);
#endif
static int ar2313_restart(struct net_device *dev);
#if DEBUG
static void ar2313_dump_regs(struct net_device *dev);
#endif
static void ar2313_load_rx_ring(struct net_device *dev, int bufs);
static irqreturn_t ar2313_interrupt(int irq, void *dev_id);
static int ar2313_open(struct net_device *dev);
static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev);
static int ar2313_close(struct net_device *dev);
static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr,
int cmd);
static void ar2313_init_cleanup(struct net_device *dev);
static int ar2313_setup_timer(struct net_device *dev);
static void ar2313_link_timer_fn(unsigned long data);
static void ar2313_check_link(struct net_device *dev);
#endif /* _AR2313_H_ */

142
target/linux/atheros/files-2.6.28/drivers/net/ar2313/dma.h
View File

@ -1,142 +0,0 @@
#ifndef __ARUBA_DMA_H__
#define __ARUBA_DMA_H__
/*******************************************************************************
*
* Copyright 2002 Integrated Device Technology, Inc.
* All rights reserved.
*
* DMA register definition.
*
* File : $Id: dma.h,v 1.3 2002/06/06 18:34:03 astichte Exp $
*
* Author : ryan.holmQVist@idt.com
* Date : 20011005
* Update :
* $Log: dma.h,v $
* Revision 1.3 2002/06/06 18:34:03 astichte
* Added XXX_PhysicalAddress and XXX_VirtualAddress
*
* Revision 1.2 2002/06/05 18:30:46 astichte
* Removed IDTField
*
* Revision 1.1 2002/05/29 17:33:21 sysarch
* jba File moved from vcode/include/idt/acacia
*
*
******************************************************************************/
#define AR_BIT(x) (1 << (x))
#define DMA_RX_ERR_CRC AR_BIT(1)
#define DMA_RX_ERR_DRIB AR_BIT(2)
#define DMA_RX_ERR_MII AR_BIT(3)
#define DMA_RX_EV2 AR_BIT(5)
#define DMA_RX_ERR_COL AR_BIT(6)
#define DMA_RX_LONG AR_BIT(7)
#define DMA_RX_LS AR_BIT(8) /* last descriptor */
#define DMA_RX_FS AR_BIT(9) /* first descriptor */
#define DMA_RX_MF AR_BIT(10) /* multicast frame */
#define DMA_RX_ERR_RUNT AR_BIT(11) /* runt frame */
#define DMA_RX_ERR_LENGTH AR_BIT(12) /* length error */
#define DMA_RX_ERR_DESC AR_BIT(14) /* descriptor error */
#define DMA_RX_ERROR AR_BIT(15) /* error summary */
#define DMA_RX_LEN_MASK 0x3fff0000
#define DMA_RX_LEN_SHIFT 16
#define DMA_RX_FILT AR_BIT(30)
#define DMA_RX_OWN AR_BIT(31) /* desc owned by DMA controller */
#define DMA_RX1_BSIZE_MASK 0x000007ff
#define DMA_RX1_BSIZE_SHIFT 0
#define DMA_RX1_CHAINED AR_BIT(24)
#define DMA_RX1_RER AR_BIT(25)
#define DMA_TX_ERR_UNDER AR_BIT(1) /* underflow error */
#define DMA_TX_ERR_DEFER AR_BIT(2) /* excessive deferral */
#define DMA_TX_COL_MASK 0x78
#define DMA_TX_COL_SHIFT 3
#define DMA_TX_ERR_HB AR_BIT(7) /* hearbeat failure */
#define DMA_TX_ERR_COL AR_BIT(8) /* excessive collisions */
#define DMA_TX_ERR_LATE AR_BIT(9) /* late collision */
#define DMA_TX_ERR_LINK AR_BIT(10) /* no carrier */
#define DMA_TX_ERR_LOSS AR_BIT(11) /* loss of carrier */
#define DMA_TX_ERR_JABBER AR_BIT(14) /* transmit jabber timeout */
#define DMA_TX_ERROR AR_BIT(15) /* frame aborted */
#define DMA_TX_OWN AR_BIT(31) /* descr owned by DMA controller */
#define DMA_TX1_BSIZE_MASK 0x000007ff
#define DMA_TX1_BSIZE_SHIFT 0
#define DMA_TX1_CHAINED AR_BIT(24) /* chained descriptors */
#define DMA_TX1_TER AR_BIT(25) /* transmit end of ring */
#define DMA_TX1_FS AR_BIT(29) /* first segment */
#define DMA_TX1_LS AR_BIT(30) /* last segment */
#define DMA_TX1_IC AR_BIT(31) /* interrupt on completion */
#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */
#define MAC_CONTROL_RE AR_BIT(2) /* receive enable */
#define MAC_CONTROL_TE AR_BIT(3) /* transmit enable */
#define MAC_CONTROL_DC AR_BIT(5) /* Deferral check */
#define MAC_CONTROL_ASTP AR_BIT(8) /* Auto pad strip */
#define MAC_CONTROL_DRTY AR_BIT(10) /* Disable retry */
#define MAC_CONTROL_DBF AR_BIT(11) /* Disable bcast frames */
#define MAC_CONTROL_LCC AR_BIT(12) /* late collision ctrl */
#define MAC_CONTROL_HP AR_BIT(13) /* Hash Perfect filtering */
#define MAC_CONTROL_HASH AR_BIT(14) /* Unicast hash filtering */
#define MAC_CONTROL_HO AR_BIT(15) /* Hash only filtering */
#define MAC_CONTROL_PB AR_BIT(16) /* Pass Bad frames */
#define MAC_CONTROL_IF AR_BIT(17) /* Inverse filtering */
#define MAC_CONTROL_PR AR_BIT(18) /* promiscuous mode (valid frames
only) */
#define MAC_CONTROL_PM AR_BIT(19) /* pass multicast */
#define MAC_CONTROL_F AR_BIT(20) /* full-duplex */
#define MAC_CONTROL_DRO AR_BIT(23) /* Disable Receive Own */
#define MAC_CONTROL_HBD AR_BIT(28) /* heart-beat disabled (MUST BE
SET) */
#define MAC_CONTROL_BLE AR_BIT(30) /* big endian mode */
#define MAC_CONTROL_RA AR_BIT(31) /* receive all (valid and invalid
frames) */
#define MII_ADDR_BUSY AR_BIT(0)
#define MII_ADDR_WRITE AR_BIT(1)
#define MII_ADDR_REG_SHIFT 6
#define MII_ADDR_PHY_SHIFT 11
#define MII_DATA_SHIFT 0
#define FLOW_CONTROL_FCE AR_BIT(1)
#define DMA_BUS_MODE_SWR AR_BIT(0) /* software reset */
#define DMA_BUS_MODE_BLE AR_BIT(7) /* big endian mode */
#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
#define DMA_BUS_MODE_DBO AR_BIT(20) /* big-endian descriptors */
#define DMA_STATUS_TI AR_BIT(0) /* transmit interrupt */
#define DMA_STATUS_TPS AR_BIT(1) /* transmit process stopped */
#define DMA_STATUS_TU AR_BIT(2) /* transmit buffer unavailable */
#define DMA_STATUS_TJT AR_BIT(3) /* transmit buffer timeout */
#define DMA_STATUS_UNF AR_BIT(5) /* transmit underflow */
#define DMA_STATUS_RI AR_BIT(6) /* receive interrupt */
#define DMA_STATUS_RU AR_BIT(7) /* receive buffer unavailable */
#define DMA_STATUS_RPS AR_BIT(8) /* receive process stopped */
#define DMA_STATUS_ETI AR_BIT(10) /* early transmit interrupt */
#define DMA_STATUS_FBE AR_BIT(13) /* fatal bus interrupt */
#define DMA_STATUS_ERI AR_BIT(14) /* early receive interrupt */
#define DMA_STATUS_AIS AR_BIT(15) /* abnormal interrupt summary */
#define DMA_STATUS_NIS AR_BIT(16) /* normal interrupt summary */
#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
#define DMA_STATUS_EB_SHIFT 23 /* error bits */
#define DMA_CONTROL_SR AR_BIT(1) /* start receive */
#define DMA_CONTROL_ST AR_BIT(13) /* start transmit */
#define DMA_CONTROL_SF AR_BIT(21) /* store and forward */
typedef struct {
volatile unsigned int status; // OWN, Device control and status.
volatile unsigned int devcs; // pkt Control bits + Length
volatile unsigned int addr; // Current Address.
volatile unsigned int descr; // Next descriptor in chain.
} ar2313_descr_t;
#endif // __ARUBA_DMA_H__

198
target/linux/atheros/files-2.6.28/drivers/watchdog/ar2315-wtd.c
View File

@ -1,198 +0,0 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Copyright (C) 2008 John Crispin <blogic@openwrt.org>
* Based on EP93xx and ifxmips wdt driver
*/
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/fs.h>
#include <linux/ioport.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/addrspace.h>
#include <ar531x.h>
#define CLOCK_RATE 40000000
#define HEARTBEAT(x) (x < 1 || x > 90)?(20):(x)
static int wdt_timeout = 20;
static int started = 0;
static int in_use = 0;
static void
ar2315_wdt_enable(void)
{
sysRegWrite(AR5315_WD, wdt_timeout * CLOCK_RATE);
sysRegWrite(AR5315_ISR, 0x80);
}
static ssize_t
ar2315_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
{
if(len)
ar2315_wdt_enable();
return len;
}
static int
ar2315_wdt_open(struct inode *inode, struct file *file)
{
if(in_use)
return -EBUSY;
ar2315_wdt_enable();
in_use = started = 1;
return nonseekable_open(inode, file);
}
static int
ar2315_wdt_release(struct inode *inode, struct file *file)
{
in_use = 0;
return 0;
}
static irqreturn_t
ar2315_wdt_interrupt(int irq, void *dev_id)
{
if(started)
{
printk(KERN_CRIT "watchdog expired, rebooting system\n");
emergency_restart();
} else {
sysRegWrite(AR5315_WDC, 0);
sysRegWrite(AR5315_WD, 0);
sysRegWrite(AR5315_ISR, 0x80);
}
return IRQ_HANDLED;
}
static struct watchdog_info ident = {
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
.identity = "ar2315 Watchdog",
};
static int
ar2315_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
int new_wdt_timeout;
int ret = -ENOIOCTLCMD;
switch(cmd)
{
case WDIOC_GETSUPPORT:
ret = copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(ident)) ? -EFAULT : 0;
break;
case WDIOC_KEEPALIVE:
ar2315_wdt_enable();
ret = 0;
break;
case WDIOC_SETTIMEOUT:
if((ret = get_user(new_wdt_timeout, (int __user *)arg)))
break;
wdt_timeout = HEARTBEAT(new_wdt_timeout);
ar2315_wdt_enable();
break;
case WDIOC_GETTIMEOUT:
ret = put_user(wdt_timeout, (int __user *)arg);
break;
}
return ret;
}
static struct file_operations ar2315_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = ar2315_wdt_write,
.ioctl = ar2315_wdt_ioctl,
.open = ar2315_wdt_open,
.release = ar2315_wdt_release,
};
static struct miscdevice ar2315_wdt_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &ar2315_wdt_fops,
};
static int
ar2315_wdt_probe(struct platform_device *dev)
{
int ret = 0;
ar2315_wdt_enable();
ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt, IRQF_DISABLED, "ar2315_wdt", NULL);
if(ret)
{
printk(KERN_ERR "ar2315wdt: failed to register inetrrupt\n");
goto out;
}
ret = misc_register(&ar2315_wdt_miscdev);
if(ret)
printk(KERN_ERR "ar2315wdt: failed to register miscdev\n");
out:
return ret;
}
static int
ar2315_wdt_remove(struct platform_device *dev)
{
misc_deregister(&ar2315_wdt_miscdev);
free_irq(AR531X_MISC_IRQ_WATCHDOG, NULL);
return 0;
}
static struct platform_driver ar2315_wdt_driver = {
.probe = ar2315_wdt_probe,
.remove = ar2315_wdt_remove,
.driver = {
.name = "ar2315_wdt",
.owner = THIS_MODULE,
},
};
static int __init
init_ar2315_wdt(void)
{
int ret = platform_driver_register(&ar2315_wdt_driver);
if(ret)
printk(KERN_INFO "ar2315_wdt: error registering platfom driver!");
return ret;
}
static void __exit
exit_ar2315_wdt(void)
{
platform_driver_unregister(&ar2315_wdt_driver);
}
module_init(init_ar2315_wdt);
module_exit(exit_ar2315_wdt);

17
target/linux/atheros/patches-2.6.28/901-get_c0_compare_irq_function.patch → target/linux/atheros/patches-2.6.28/001-get_c0_compare_irq_function.patch
View File

@ -1,3 +1,7 @@
Allow boards to provide their own function for reading the timer IRQ number
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
--- a/arch/mips/kernel/traps.c --- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c
@@ -47,6 +47,7 @@ @@ -47,6 +47,7 @@
@ -27,17 +31,4 @@
#else #else
static inline int mips_clockevent_init(void) static inline int mips_clockevent_init(void)
{ {
--- a/arch/mips/atheros/board.c
+++ b/arch/mips/atheros/board.c
@@ -265,6 +265,11 @@ void (*board_time_init)(void);
void __init plat_time_init(void) {
board_time_init();
}
+
+unsigned int __cpuinit get_c0_compare_irq(void)
+{
+ return CP0_LEGACY_COMPARE_IRQ;
+}
#endif
void __init arch_init_irq(void)

0
target/linux/atheros/patches-2.6.28/902-mips_clocksource_init_war.patch → target/linux/atheros/patches-2.6.28/002-mips_clocksource_init_war.patch
View File

3532
target/linux/atheros/patches-2.6.28/100-board.patch
View File

File diff suppressed because it is too large Load Diff

1600
target/linux/atheros/patches-2.6.28/110-ar2313_ethernet.patch Normal file
View File

File diff suppressed because it is too large Load Diff

20
target/linux/atheros/patches-2.6.28/110-spiflash.patch
View File

@ -1,20 +0,0 @@
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -104,6 +104,10 @@ config M25PXX_USE_FAST_READ
help
This option enables FAST_READ access supported by ST M25Pxx.
+config MTD_SPIFLASH
+ tristate "Atheros AR2315/6/7 SPI Flash support"
+ depends on ATHEROS_AR5315
+
config MTD_SLRAM
tristate "Uncached system RAM"
help
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_MTD_LART) += lart.o
obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o
+obj-$(CONFIG_MTD_SPIFLASH) += spiflash.o

661
target/linux/atheros/patches-2.6.28/120-spiflash.patch Normal file
View File

@ -0,0 +1,661 @@
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -104,6 +104,10 @@ config M25PXX_USE_FAST_READ
help
This option enables FAST_READ access supported by ST M25Pxx.
+config MTD_AR2315
+ tristate "Atheros AR2315+ SPI Flash support"
+ depends on ATHEROS_AR2315
+
config MTD_SLRAM
tristate "Uncached system RAM"
help
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_MTD_LART) += lart.o
obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o
+obj-$(CONFIG_MTD_AR2315) += ar2315.o
--- /dev/null
+++ b/drivers/mtd/devices/ar2315.c
@@ -0,0 +1,519 @@
+
+/*
+ * MTD driver for the SPI Flash Memory support on Atheros AR2315
+ *
+ * Copyright (c) 2005-2006 Atheros Communications Inc.
+ * Copyright (C) 2006-2007 FON Technology, SL.
+ * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/squashfs_fs.h>
+#include <linux/root_dev.h>
+#include <linux/delay.h>
+#include <asm/delay.h>
+#include <asm/io.h>
+
+#include <ar2315_spiflash.h>
+#include <ar231x_platform.h>
+#include <ar231x.h>
+
+
+#define SPIFLASH "spiflash: "
+#define busy_wait(_priv, _condition, _wait) do { \
+ while (_condition) { \
+ spin_unlock_bh(&_priv->lock); \
+ if (_wait > 1) \
+ msleep(_wait); \
+ else if ((_wait == 1) && need_resched()) \
+ schedule(); \
+ else \
+ udelay(1); \
+ spin_lock_bh(&_priv->lock); \
+ } \
+} while (0)
+
+enum {
+ FLASH_NONE,
+ FLASH_1MB,
+ FLASH_2MB,
+ FLASH_4MB,
+ FLASH_8MB,
+ FLASH_16MB,
+};
+
+/* Flash configuration table */
+struct flashconfig {
+ u32 byte_cnt;
+ u32 sector_cnt;
+ u32 sector_size;
+};
+
+const struct flashconfig flashconfig_tbl[] = {
+ [FLASH_NONE] = { 0, 0, 0},
+ [FLASH_1MB] = { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE},
+ [FLASH_2MB] = { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE},
+ [FLASH_4MB] = { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE},
+ [FLASH_8MB] = { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE},
+ [FLASH_16MB] = { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, STM_16MB_SECTOR_SIZE}
+};
+
+/* Mapping of generic opcodes to STM serial flash opcodes */
+enum {
+ SPI_WRITE_ENABLE,
+ SPI_WRITE_DISABLE,
+ SPI_RD_STATUS,
+ SPI_WR_STATUS,
+ SPI_RD_DATA,
+ SPI_FAST_RD_DATA,
+ SPI_PAGE_PROGRAM,
+ SPI_SECTOR_ERASE,
+ SPI_BULK_ERASE,
+ SPI_DEEP_PWRDOWN,
+ SPI_RD_SIG,
+};
+
+struct opcodes {
+ __u16 code;
+ __s8 tx_cnt;
+ __s8 rx_cnt;
+};
+const struct opcodes stm_opcodes[] = {
+ [SPI_WRITE_ENABLE] = {STM_OP_WR_ENABLE, 1, 0},
+ [SPI_WRITE_DISABLE] = {STM_OP_WR_DISABLE, 1, 0},
+ [SPI_RD_STATUS] = {STM_OP_RD_STATUS, 1, 1},
+ [SPI_WR_STATUS] = {STM_OP_WR_STATUS, 1, 0},
+ [SPI_RD_DATA] = {STM_OP_RD_DATA, 4, 4},
+ [SPI_FAST_RD_DATA] = {STM_OP_FAST_RD_DATA, 5, 0},
+ [SPI_PAGE_PROGRAM] = {STM_OP_PAGE_PGRM, 8, 0},
+ [SPI_SECTOR_ERASE] = {STM_OP_SECTOR_ERASE, 4, 0},
+ [SPI_BULK_ERASE] = {STM_OP_BULK_ERASE, 1, 0},
+ [SPI_DEEP_PWRDOWN] = {STM_OP_DEEP_PWRDOWN, 1, 0},
+ [SPI_RD_SIG] = {STM_OP_RD_SIG, 4, 1},
+};
+
+/* Driver private data structure */
+struct spiflash_priv {
+ struct mtd_info mtd;
+ void *readaddr; /* memory mapped data for read */
+ void *mmraddr; /* memory mapped register space */
+ wait_queue_head_t wq;
+ spinlock_t lock;
+ int state;
+};
+
+#define to_spiflash(_mtd) container_of(_mtd, struct spiflash_priv, mtd)
+
+enum {
+ FL_READY,
+ FL_READING,
+ FL_ERASING,
+ FL_WRITING
+};
+
+/***************************************************************************************************/
+
+static u32
+spiflash_read_reg(struct spiflash_priv *priv, int reg)
+{
+ return ar231x_read_reg((u32) priv->mmraddr + reg);
+}
+
+static void
+spiflash_write_reg(struct spiflash_priv *priv, int reg, u32 data)
+{
+ ar231x_write_reg((u32) priv->mmraddr + reg, data);
+}
+
+static u32
+spiflash_wait_busy(struct spiflash_priv *priv)
+{
+ u32 reg;
+
+ busy_wait(priv, (reg = spiflash_read_reg(priv, SPI_FLASH_CTL)) &
+ SPI_CTL_BUSY, 0);
+ return reg;
+}
+
+static u32
+spiflash_sendcmd (struct spiflash_priv *priv, int opcode, u32 addr)
+{
+ const struct opcodes *op;
+ u32 reg, mask;
+
+ op = &stm_opcodes[opcode];
+ reg = spiflash_wait_busy(priv);
+ spiflash_write_reg(priv, SPI_FLASH_OPCODE,
+ ((u32) op->code) | (addr << 8));
+
+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
+ reg |= SPI_CTL_START | op->tx_cnt | (op->rx_cnt << 4);
+
+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
+ spiflash_wait_busy(priv);
+
+ if (!op->rx_cnt)
+ return 0;
+
+ reg = spiflash_read_reg(priv, SPI_FLASH_DATA);
+
+ switch (op->rx_cnt) {
+ case 1:
+ mask = 0x000000ff;
+ break;
+ case 2:
+ mask = 0x0000ffff;
+ break;
+ case 3:
+ mask = 0x00ffffff;
+ break;
+ default:
+ mask = 0xffffffff;
+ break;
+ }
+ reg &= mask;
+
+ return reg;
+}
+
+
+/*
+ * Probe SPI flash device
+ * Function returns 0 for failure.
+ * and flashconfig_tbl array index for success.
+ */
+static int
+spiflash_probe_chip (struct spiflash_priv *priv)
+{
+ u32 sig;
+ int flash_size;
+
+ /* Read the signature on the flash device */
+ spin_lock_bh(&priv->lock);
+ sig = spiflash_sendcmd(priv, SPI_RD_SIG, 0);
+ spin_unlock_bh(&priv->lock);
+
+ switch (sig) {
+ case STM_8MBIT_SIGNATURE:
+ flash_size = FLASH_1MB;
+ break;
+ case STM_16MBIT_SIGNATURE:
+ flash_size = FLASH_2MB;
+ break;
+ case STM_32MBIT_SIGNATURE:
+ flash_size = FLASH_4MB;
+ break;
+ case STM_64MBIT_SIGNATURE:
+ flash_size = FLASH_8MB;
+ break;
+ case STM_128MBIT_SIGNATURE:
+ flash_size = FLASH_16MB;
+ break;
+ default:
+ printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n");
+ return 0;
+ }
+
+ return flash_size;
+}
+
+
+/* wait until the flash chip is ready and grab a lock */
+static int spiflash_wait_ready(struct spiflash_priv *priv, int state)
+{
+ DECLARE_WAITQUEUE(wait, current);
+
+retry:
+ spin_lock_bh(&priv->lock);
+ if (priv->state != FL_READY) {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ add_wait_queue(&priv->wq, &wait);
+ spin_unlock_bh(&priv->lock);
+ schedule();
+ remove_wait_queue(&priv->wq, &wait);
+
+ if(signal_pending(current))
+ return 0;
+
+ goto retry;
+ }
+ priv->state = state;
+
+ return 1;
+}
+
+static inline void spiflash_done(struct spiflash_priv *priv)
+{
+ priv->state = FL_READY;
+ spin_unlock_bh(&priv->lock);
+ wake_up(&priv->wq);
+}
+
+static void
+spiflash_wait_complete(struct spiflash_priv *priv)
+{
+ busy_wait(priv, spiflash_sendcmd(priv, SPI_RD_STATUS, 0) &
+ SPI_STATUS_WIP, 20);
+ spiflash_done(priv);
+}
+
+
+
+static int
+spiflash_erase (struct mtd_info *mtd, struct erase_info *instr)
+{
+ struct spiflash_priv *priv = to_spiflash(mtd);
+ const struct opcodes *op;
+ u32 temp, reg;
+
+ if (instr->addr + instr->len > mtd->size)
+ return -EINVAL;
+
+ if (!spiflash_wait_ready(priv, FL_ERASING))
+ return -EINTR;
+
+ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
+ reg = spiflash_wait_busy(priv);
+
+ op = &stm_opcodes[SPI_SECTOR_ERASE];
+ temp = ((u32)instr->addr << 8) | (u32)(op->code);
+ spiflash_write_reg(priv, SPI_FLASH_OPCODE, temp);
+
+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
+ reg |= op->tx_cnt | SPI_CTL_START;
+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
+
+ spiflash_wait_complete(priv);
+
+ instr->state = MTD_ERASE_DONE;
+ if (instr->callback)
+ instr->callback(instr);
+
+ return 0;
+}
+
+static int
+spiflash_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+ struct spiflash_priv *priv = to_spiflash(mtd);
+ u8 *read_addr;
+
+ if (!len)
+ return 0;
+
+ if (from + len > mtd->size)
+ return -EINVAL;
+
+ *retlen = len;
+
+ if (!spiflash_wait_ready(priv, FL_READING))
+ return -EINTR;
+
+ read_addr = (u8 *)(priv->readaddr + from);
+ memcpy_fromio(buf, read_addr, len);
+ spiflash_done(priv);
+
+ return 0;
+}
+
+static int
+spiflash_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u8 *buf)
+{
+ struct spiflash_priv *priv = to_spiflash(mtd);
+ u32 opcode, bytes_left;
+
+ *retlen = 0;
+
+ if (!len)
+ return 0;
+
+ if (to + len > mtd->size)
+ return -EINVAL;
+
+ bytes_left = len;
+
+ do {
+ u32 read_len, reg, page_offset, spi_data = 0;
+
+ read_len = min(bytes_left, sizeof(u32));
+
+ /* 32-bit writes cannot span across a page boundary
+ * (256 bytes). This types of writes require two page
+ * program operations to handle it correctly. The STM part
+ * will write the overflow data to the beginning of the
+ * current page as opposed to the subsequent page.
+ */
+ page_offset = (to & (STM_PAGE_SIZE - 1)) + read_len;
+
+ if (page_offset > STM_PAGE_SIZE)
+ read_len -= (page_offset - STM_PAGE_SIZE);
+
+ if (!spiflash_wait_ready(priv, FL_WRITING))
+ return -EINTR;
+
+ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
+ spi_data = 0;
+ switch (read_len) {
+ case 4:
+ spi_data |= buf[3] << 24;
+ /* fall through */
+ case 3:
+ spi_data |= buf[2] << 16;
+ /* fall through */
+ case 2:
+ spi_data |= buf[1] << 8;
+ /* fall through */
+ case 1:
+ spi_data |= buf[0] & 0xff;
+ break;
+ default:
+ break;
+ }
+
+ spiflash_write_reg(priv, SPI_FLASH_DATA, spi_data);
+ opcode = stm_opcodes[SPI_PAGE_PROGRAM].code |
+ (to & 0x00ffffff) << 8;
+ spiflash_write_reg(priv, SPI_FLASH_OPCODE, opcode);
+
+ reg = spiflash_read_reg(priv, SPI_FLASH_CTL);
+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
+ reg |= (read_len + 4) | SPI_CTL_START;
+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
+
+ spiflash_wait_complete(priv);
+
+ bytes_left -= read_len;
+ to += read_len;
+ buf += read_len;
+
+ *retlen += read_len;
+ } while (bytes_left != 0);
+
+ return 0;
+}
+
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "MyLoader", NULL };
+#endif
+
+
+static int
+spiflash_probe(struct platform_device *pdev)
+{
+ struct spiflash_priv *priv;
+ struct mtd_partition *parts;
+ struct mtd_info *mtd;
+ int index, num_parts;
+ int result = 0;
+
+ priv = kzalloc(sizeof(struct spiflash_priv), GFP_KERNEL);
+ spin_lock_init(&priv->lock);
+ init_waitqueue_head(&priv->wq);
+ priv->state = FL_READY;
+ mtd = &priv->mtd;
+
+ priv->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE);
+ if (!priv->mmraddr) {
+ printk(KERN_WARNING SPIFLASH "Failed to map flash device\n");
+ goto error;
+ }
+
+ index = spiflash_probe_chip(priv);
+ if (!index) {
+ printk (KERN_WARNING SPIFLASH "Found no serial flash device\n");
+ goto error;
+ }
+
+ priv->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt);
+ if (!priv->readaddr) {
+ printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
+ goto error;
+ }
+
+ platform_set_drvdata(pdev, priv);
+ mtd->name = "spiflash";
+ mtd->type = MTD_NORFLASH;
+ mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
+ mtd->size = flashconfig_tbl[index].byte_cnt;
+ mtd->erasesize = flashconfig_tbl[index].sector_size;
+ mtd->writesize = 1;
+ mtd->numeraseregions = 0;
+ mtd->eraseregions = NULL;
+ mtd->erase = spiflash_erase;
+ mtd->read = spiflash_read;
+ mtd->write = spiflash_write;
+ mtd->owner = THIS_MODULE;
+
+#ifdef CONFIG_MTD_PARTITIONS
+ /* parse redboot partitions */
+ num_parts = parse_mtd_partitions(mtd, part_probe_types, &parts, 0);
+ if (!num_parts)
+ goto error;
+
+ result = add_mtd_partitions(mtd, parts, num_parts);
+#endif
+
+ return result;
+
+error:
+ if (priv->mmraddr)
+ iounmap(priv->mmraddr);
+ kfree(priv);
+ return -ENXIO;
+}
+
+static int
+spiflash_remove (struct platform_device *pdev)
+{
+ struct spiflash_priv *priv = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = &priv->mtd;
+
+ del_mtd_partitions(mtd);
+ iounmap(priv->mmraddr);
+ iounmap(priv->readaddr);
+ kfree(priv);
+
+ return 0;
+}
+
+struct platform_driver spiflash_driver = {
+ .driver.name = "spiflash",
+ .probe = spiflash_probe,
+ .remove = spiflash_remove,
+};
+
+int __init
+spiflash_init (void)
+{
+ return platform_driver_register(&spiflash_driver);
+}
+
+void __exit
+spiflash_exit (void)
+{
+ return platform_driver_unregister(&spiflash_driver);
+}
+
+module_init (spiflash_init);
+module_exit (spiflash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc");
+MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC");
+
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/ar2315_spiflash.h
@@ -0,0 +1,116 @@
+/*
+ * SPI Flash Memory support header file.
+ *
+ * Copyright (c) 2005, Atheros Communications Inc.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __AR2315_SPIFLASH_H
+#define __AR2315_SPIFLASH_H
+
+#define STM_PAGE_SIZE 256
+
+#define SFI_WRITE_BUFFER_SIZE 4
+#define SFI_FLASH_ADDR_MASK 0x00ffffff
+
+#define STM_8MBIT_SIGNATURE 0x13
+#define STM_M25P80_BYTE_COUNT 1048576
+#define STM_M25P80_SECTOR_COUNT 16
+#define STM_M25P80_SECTOR_SIZE 0x10000
+
+#define STM_16MBIT_SIGNATURE 0x14
+#define STM_M25P16_BYTE_COUNT 2097152
+#define STM_M25P16_SECTOR_COUNT 32
+#define STM_M25P16_SECTOR_SIZE 0x10000
+
+#define STM_32MBIT_SIGNATURE 0x15
+#define STM_M25P32_BYTE_COUNT 4194304
+#define STM_M25P32_SECTOR_COUNT 64
+#define STM_M25P32_SECTOR_SIZE 0x10000
+
+#define STM_64MBIT_SIGNATURE 0x16
+#define STM_M25P64_BYTE_COUNT 8388608
+#define STM_M25P64_SECTOR_COUNT 128
+#define STM_M25P64_SECTOR_SIZE 0x10000
+
+#define STM_128MBIT_SIGNATURE 0x17
+#define STM_M25P128_BYTE_COUNT 16777216
+#define STM_M25P128_SECTOR_COUNT 256
+#define STM_M25P128_SECTOR_SIZE 0x10000
+
+#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT
+#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
+#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE
+#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT
+#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
+#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE
+#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT
+#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
+#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE
+#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT
+#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
+#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE
+#define STM_16MB_BYTE_COUNT STM_M25P128_BYTE_COUNT
+#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT
+#define STM_16MB_SECTOR_SIZE STM_M25P128_SECTOR_SIZE
+
+/*
+ * ST Microelectronics Opcodes for Serial Flash
+ */
+
+#define STM_OP_WR_ENABLE 0x06 /* Write Enable */
+#define STM_OP_WR_DISABLE 0x04 /* Write Disable */
+#define STM_OP_RD_STATUS 0x05 /* Read Status */
+#define STM_OP_WR_STATUS 0x01 /* Write Status */
+#define STM_OP_RD_DATA 0x03 /* Read Data */
+#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */
+#define STM_OP_PAGE_PGRM 0x02 /* Page Program */
+#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */
+#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */
+#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */
+#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */
+
+#define STM_STATUS_WIP 0x01 /* Write-In-Progress */
+#define STM_STATUS_WEL 0x02 /* Write Enable Latch */
+#define STM_STATUS_BP0 0x04 /* Block Protect 0 */
+#define STM_STATUS_BP1 0x08 /* Block Protect 1 */
+#define STM_STATUS_BP2 0x10 /* Block Protect 2 */
+#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */
+
+/*
+ * SPI Flash Interface Registers
+ */
+#define AR531XPLUS_SPI_READ 0x08000000
+#define AR531XPLUS_SPI_MMR 0x11300000
+#define AR531XPLUS_SPI_MMR_SIZE 12
+
+#define AR531XPLUS_SPI_CTL 0x00
+#define AR531XPLUS_SPI_OPCODE 0x04
+#define AR531XPLUS_SPI_DATA 0x08
+
+#define SPI_FLASH_READ AR531XPLUS_SPI_READ
+#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR
+#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE
+#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL
+#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE
+#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA
+
+#define SPI_CTL_START 0x00000100
+#define SPI_CTL_BUSY 0x00010000
+#define SPI_CTL_TXCNT_MASK 0x0000000f
+#define SPI_CTL_RXCNT_MASK 0x000000f0
+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
+#define SPI_CTL_SIZE_MASK 0x00060000
+
+#define SPI_CTL_CLK_SEL_MASK 0x03000000
+#define SPI_OPCODE_MASK 0x000000ff
+
+#define SPI_STATUS_WIP STM_STATUS_WIP
+
+#endif

25
target/linux/atheros/patches-2.6.28/120-watchdog.patch
View File

@ -1,25 +0,0 @@
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -747,6 +747,12 @@ config TXX9_WDT
help
Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+config ATHEROS_WDT
+ tristate "Atheros wisoc Watchdog Timer"
+ depends on ATHEROS
+ help
+ Hardware driver for the Atheros wisoc Watchdog Timer.
+
# PARISC Architecture
# POWERPC Architecture
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+obj-$(CONFIG_ATHEROS_WDT) += ar2315-wtd.o
# PARISC Architecture

25
target/linux/atheros/patches-2.6.28/130-ar2313_ethernet.patch
View File

@ -1,25 +0,0 @@
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -359,6 +359,12 @@ config AX88796_93CX6
help
Select this if your platform comes with an external 93CX6 eeprom.
+config AR2313
+ tristate "AR2313 Ethernet support"
+ depends on NET_ETHERNET && ATHEROS
+ help
+ Support for the AR231x/531x ethernet controller
+
config MACE
tristate "MACE (Power Mac ethernet) support"
depends on PPC_PMAC && PPC32
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -199,6 +199,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o
obj-$(CONFIG_KORINA) += korina.o
obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
+obj-$(CONFIG_AR2313) += ar2313/
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
obj-$(CONFIG_DECLANCE) += declance.o

228
target/linux/atheros/patches-2.6.28/130-watchdog.patch Normal file
View File

@ -0,0 +1,228 @@
--- /dev/null
+++ b/drivers/watchdog/ar2315-wtd.c
@@ -0,0 +1,200 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2008 John Crispin <blogic@openwrt.org>
+ * Based on EP93xx and ifxmips wdt driver
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/addrspace.h>
+#include <ar231x_platform.h>
+#include <ar2315_regs.h>
+#include <ar231x.h>
+
+#define CLOCK_RATE 40000000
+#define HEARTBEAT(x) (x < 1 || x > 90)?(20):(x)
+
+static int wdt_timeout = 20;
+static int started = 0;
+static int in_use = 0;
+
+static void
+ar2315_wdt_enable(void)
+{
+ ar231x_write_reg(AR2315_WD, wdt_timeout * CLOCK_RATE);
+ ar231x_write_reg(AR2315_ISR, 0x80);
+}
+
+static ssize_t
+ar2315_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
+{
+ if(len)
+ ar2315_wdt_enable();
+ return len;
+}
+
+static int
+ar2315_wdt_open(struct inode *inode, struct file *file)
+{
+ if(in_use)
+ return -EBUSY;
+ ar2315_wdt_enable();
+ in_use = started = 1;
+ return nonseekable_open(inode, file);
+}
+
+static int
+ar2315_wdt_release(struct inode *inode, struct file *file)
+{
+ in_use = 0;
+ return 0;
+}
+
+static irqreturn_t
+ar2315_wdt_interrupt(int irq, void *dev_id)
+{
+ if(started)
+ {
+ printk(KERN_CRIT "watchdog expired, rebooting system\n");
+ emergency_restart();
+ } else {
+ ar231x_write_reg(AR2315_WDC, 0);
+ ar231x_write_reg(AR2315_WD, 0);
+ ar231x_write_reg(AR2315_ISR, 0x80);
+ }
+ return IRQ_HANDLED;
+}
+
+static struct watchdog_info ident = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+ .identity = "ar2315 Watchdog",
+};
+
+static int
+ar2315_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+{
+ int new_wdt_timeout;
+ int ret = -ENOIOCTLCMD;
+
+ switch(cmd)
+ {
+ case WDIOC_GETSUPPORT:
+ ret = copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(ident)) ? -EFAULT : 0;
+ break;
+
+ case WDIOC_KEEPALIVE:
+ ar2315_wdt_enable();
+ ret = 0;
+ break;
+
+ case WDIOC_SETTIMEOUT:
+ if((ret = get_user(new_wdt_timeout, (int __user *)arg)))
+ break;
+ wdt_timeout = HEARTBEAT(new_wdt_timeout);
+ ar2315_wdt_enable();
+ break;
+
+ case WDIOC_GETTIMEOUT:
+ ret = put_user(wdt_timeout, (int __user *)arg);
+ break;
+ }
+ return ret;
+}
+
+static struct file_operations ar2315_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = ar2315_wdt_write,
+ .ioctl = ar2315_wdt_ioctl,
+ .open = ar2315_wdt_open,
+ .release = ar2315_wdt_release,
+};
+
+static struct miscdevice ar2315_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &ar2315_wdt_fops,
+};
+
+static int
+ar2315_wdt_probe(struct platform_device *dev)
+{
+ int ret = 0;
+
+ ar2315_wdt_enable();
+ ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt, IRQF_DISABLED, "ar2315_wdt", NULL);
+ if(ret)
+ {
+ printk(KERN_ERR "ar2315wdt: failed to register inetrrupt\n");
+ goto out;
+ }
+
+ ret = misc_register(&ar2315_wdt_miscdev);
+ if(ret)
+ printk(KERN_ERR "ar2315wdt: failed to register miscdev\n");
+
+out:
+ return ret;
+}
+
+static int
+ar2315_wdt_remove(struct platform_device *dev)
+{
+ misc_deregister(&ar2315_wdt_miscdev);
+ free_irq(AR531X_MISC_IRQ_WATCHDOG, NULL);
+ return 0;
+}
+
+static struct platform_driver ar2315_wdt_driver = {
+ .probe = ar2315_wdt_probe,
+ .remove = ar2315_wdt_remove,
+ .driver = {
+ .name = "ar2315_wdt",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init
+init_ar2315_wdt(void)
+{
+ int ret = platform_driver_register(&ar2315_wdt_driver);
+ if(ret)
+ printk(KERN_INFO "ar2315_wdt: error registering platfom driver!");
+ return ret;
+}
+
+static void __exit
+exit_ar2315_wdt(void)
+{
+ platform_driver_unregister(&ar2315_wdt_driver);
+}
+
+module_init(init_ar2315_wdt);
+module_exit(exit_ar2315_wdt);
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -747,6 +747,12 @@ config TXX9_WDT
help
Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+config ATHEROS_WDT
+ tristate "Atheros wisoc Watchdog Timer"
+ depends on ATHEROS
+ help
+ Hardware driver for the Atheros wisoc Watchdog Timer.
+
# PARISC Architecture
# POWERPC Architecture
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+obj-$(CONFIG_ATHEROS_WDT) += ar2315-wtd.o
# PARISC Architecture

11
target/linux/atheros/patches-2.6.28/135-ar2313_2.6.26.patch
View File

@ -1,11 +0,0 @@
--- a/drivers/net/ar2313/ar2313.c
+++ b/drivers/net/ar2313/ar2313.c
@@ -291,7 +291,7 @@ int __init ar2313_probe(struct platform_
sp->mii_bus.write = mdiobus_write;
sp->mii_bus.reset = mdiobus_reset;
sp->mii_bus.name = "ar2313_eth_mii";
- sp->mii_bus.id = 0;
+ snprintf(sp->mii_bus.id, MII_BUS_ID_SIZE, "0");
sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL);
*sp->mii_bus.irq = PHY_POLL;

144
target/linux/atheros/patches-2.6.28/137-ar2313_2.6.28.patch
View File

@ -1,144 +0,0 @@
This patch reflects changes in mdiobus implementation in kernel 2.6.28.
--- a/drivers/net/ar2313/ar2313.c
+++ b/drivers/net/ar2313/ar2313.c
@@ -159,10 +159,10 @@ static void rx_tasklet_func(unsigned lon
static void rx_tasklet_cleanup(struct net_device *dev);
static void ar2313_multicast_list(struct net_device *dev);
-static int mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
-static int mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
-static int mdiobus_reset(struct mii_bus *bus);
-static int mdiobus_probe (struct net_device *dev);
+static int ar2313_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
+static int ar2313_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
+static int ar2313_mdiobus_reset(struct mii_bus *bus);
+static int ar2313_mdiobus_probe (struct net_device *dev);
static void ar2313_adjust_link(struct net_device *dev);
#ifndef ERR
@@ -286,18 +286,22 @@ int __init ar2313_probe(struct platform_
dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq);
- sp->mii_bus.priv = dev;
- sp->mii_bus.read = mdiobus_read;
- sp->mii_bus.write = mdiobus_write;
- sp->mii_bus.reset = mdiobus_reset;
- sp->mii_bus.name = "ar2313_eth_mii";
- snprintf(sp->mii_bus.id, MII_BUS_ID_SIZE, "0");
- sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL);
- *sp->mii_bus.irq = PHY_POLL;
+ sp->mii_bus = mdiobus_alloc();
+ if (sp->mii_bus == NULL)
+ return -1;
+
+ sp->mii_bus->priv = dev;
+ sp->mii_bus->read = ar2313_mdiobus_read;
+ sp->mii_bus->write = ar2313_mdiobus_write;
+ sp->mii_bus->reset = ar2313_mdiobus_reset;
+ sp->mii_bus->name = "ar2313_eth_mii";
+ snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "0");
+ sp->mii_bus->irq = kmalloc(sizeof(int), GFP_KERNEL);
+ *sp->mii_bus->irq = PHY_POLL;
- mdiobus_register(&sp->mii_bus);
+ mdiobus_register(sp->mii_bus);
- if (mdiobus_probe(dev) != 0) {
+ if (ar2313_mdiobus_probe(dev) != 0) {
printk(KERN_ERR "ar2313: mdiobus_probe failed");
rx_tasklet_cleanup(dev);
ar2313_init_cleanup(dev);
@@ -432,9 +436,12 @@ static void rx_tasklet_cleanup(struct ne
static int __exit ar2313_remove(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
+ struct ar2313_private *sp = netdev_priv(dev);
rx_tasklet_cleanup(dev);
ar2313_init_cleanup(dev);
unregister_netdev(dev);
+ mdiobus_unregister(sp->mii_bus);
+ mdiobus_free(sp->mii_bus);
kfree(dev);
return 0;
}
@@ -619,7 +626,7 @@ static void ar2313_check_link(struct net
struct ar2313_private *sp = netdev_priv(dev);
u16 phyData;
- phyData = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMSR);
+ phyData = ar2313_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR);
if (sp->phyData != phyData) {
if (phyData & BMSR_LSTATUS) {
/* link is present, ready link partner ability to deterine
@@ -628,10 +635,10 @@ static void ar2313_check_link(struct net
u16 reg;
sp->link = 1;
- reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMCR);
+ reg = ar2313_mdiobus_read(sp->mii_bus, sp->phy, MII_BMCR);
if (reg & BMCR_ANENABLE) {
/* auto neg enabled */
- reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_LPA);
+ reg = ar2313_mdiobus_read(sp->mii_bus, sp->phy, MII_LPA);
duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0;
} else {
/* no auto neg, just read duplex config */
@@ -1320,7 +1327,7 @@ static void ar2313_adjust_link(struct ne
((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
static int
-mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
+ar2313_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
{
struct net_device *const dev = bus->priv;
struct ar2313_private *sp = netdev_priv(dev);
@@ -1332,7 +1339,7 @@ mdiobus_read(struct mii_bus *bus, int ph
}
static int
-mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
+ar2313_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
u16 value)
{
struct net_device *const dev = bus->priv;
@@ -1346,7 +1353,7 @@ mdiobus_write(struct mii_bus *bus, int p
return 0;
}
-static int mdiobus_reset(struct mii_bus *bus)
+static int ar2313_mdiobus_reset(struct mii_bus *bus)
{
struct net_device *const dev = bus->priv;
@@ -1355,7 +1362,7 @@ static int mdiobus_reset(struct mii_bus
return 0;
}
-static int mdiobus_probe (struct net_device *dev)
+static int ar2313_mdiobus_probe (struct net_device *dev)
{
struct ar2313_private *const sp = netdev_priv(dev);
struct phy_device *phydev = NULL;
@@ -1363,8 +1370,8 @@ static int mdiobus_probe (struct net_dev
/* find the first (lowest address) PHY on the current MAC's MII bus */
for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
- if (sp->mii_bus.phy_map[phy_addr]) {
- phydev = sp->mii_bus.phy_map[phy_addr];
+ if (sp->mii_bus->phy_map[phy_addr]) {
+ phydev = sp->mii_bus->phy_map[phy_addr];
break; /* break out with first one found */
}
--- a/drivers/net/ar2313/ar2313.h
+++ b/drivers/net/ar2313/ar2313.h
@@ -162,7 +162,7 @@ struct ar2313_private {
int unloading;
struct phy_device *phy_dev;
- struct mii_bus mii_bus;
+ struct mii_bus *mii_bus;
int oldduplex;
};

30
target/linux/atheros/patches-2.6.28/200-ar2313_enable_mvswitch.patch
View File

@ -1,14 +1,14 @@
--- a/drivers/net/ar2313/ar2313.c --- a/drivers/net/ar231x.c
+++ b/drivers/net/ar2313/ar2313.c +++ b/drivers/net/ar231x.c
@@ -841,6 +841,7 @@ static void ar2313_load_rx_ring(struct n @@ -735,6 +735,7 @@ static void ar231x_load_rx_ring(struct n
for (i = 0; i < nr_bufs; i++) { for (i = 0; i < nr_bufs; i++) {
struct sk_buff *skb; struct sk_buff *skb;
ar2313_descr_t *rd; ar231x_descr_t *rd;
+ int offset = RX_OFFSET; + int offset = RX_OFFSET;
if (sp->rx_skb[idx]) { if (sp->rx_skb[idx])
#if DEBUG_RX break;
@@ -862,7 +863,9 @@ static void ar2313_load_rx_ring(struct n @@ -753,7 +754,9 @@ static void ar231x_load_rx_ring(struct n
* Make sure IP header starts on a fresh cache line. * Make sure IP header starts on a fresh cache line.
*/ */
skb->dev = dev; skb->dev = dev;
@ -18,8 +18,8 @@
+ skb_reserve(skb, offset); + skb_reserve(skb, offset);
sp->rx_skb[idx] = skb; sp->rx_skb[idx] = skb;
rd = (ar2313_descr_t *) & sp->rx_ring[idx]; rd = (ar231x_descr_t *) & sp->rx_ring[idx];
@@ -953,6 +956,7 @@ static int ar2313_rx_int(struct net_devi @@ -828,6 +831,7 @@ static int ar231x_rx_int(struct net_devi
/* alloc new buffer. */ /* alloc new buffer. */
skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128); skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128);
if (skb_new != NULL) { if (skb_new != NULL) {
@ -27,7 +27,7 @@
skb = sp->rx_skb[idx]; skb = sp->rx_skb[idx];
/* set skb */ /* set skb */
@@ -960,13 +964,17 @@ static int ar2313_rx_int(struct net_devi @@ -835,13 +839,17 @@ static int ar231x_rx_int(struct net_devi
((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN); ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
dev->stats.rx_bytes += skb->len; dev->stats.rx_bytes += skb->len;
@ -48,7 +48,7 @@
/* reset descriptor's curr_addr */ /* reset descriptor's curr_addr */
rxdesc->addr = virt_to_phys(skb_new->data); rxdesc->addr = virt_to_phys(skb_new->data);
@@ -1392,6 +1400,8 @@ static int ar2313_mdiobus_probe (struct @@ -1243,6 +1251,8 @@ static int ar231x_mdiobus_probe (struct
return PTR_ERR(phydev); return PTR_ERR(phydev);
} }
@ -57,11 +57,11 @@
/* mask with MAC supported features */ /* mask with MAC supported features */
phydev->supported &= (SUPPORTED_10baseT_Half phydev->supported &= (SUPPORTED_10baseT_Half
| SUPPORTED_10baseT_Full | SUPPORTED_10baseT_Full
--- a/drivers/net/ar2313/ar2313.h --- a/drivers/net/ar231x.h
+++ b/drivers/net/ar2313/ar2313.h +++ b/drivers/net/ar231x.h
@@ -107,6 +107,8 @@ typedef struct { @@ -221,6 +221,8 @@ typedef struct {
*/ */
struct ar2313_private { struct ar231x_private {
struct net_device *dev; struct net_device *dev;
+ int (*rx)(struct sk_buff *skb); + int (*rx)(struct sk_buff *skb);
+ +