qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-27 16:43:09 +02:00
Code

ar71xx: register the second ethernet interface on the AP136

Browse Source 
Also fix the default network configuration
according to the new setup.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34854 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
juhosg 2012-12-22 12:12:50 +00:00
parent 5af4f72904
commit aa80373147
2 changed files with 27 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
target/linux/ar71xx/base-files/etc/uci-defaults/network
View File

@ -22,6 +22,13 @@ ubnt-unifi-outdoor)
ucidef_set_interface_lan "eth0 eth1"
;;
ap136)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
ucidef_add_switch_vlan "switch0" "2" "5 6"
;;
db120 |\
rb-2011l | \
rb-2011uas-2hnd)

25
target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch
View File

@ -56,7 +56,7 @@
static struct gpio_led ap136_leds_gpio[] __initdata = {
{
@@ -98,63 +104,91 @@ static struct gpio_keys_button ap136_gpi
@@ -98,63 +104,106 @@ static struct gpio_keys_button ap136_gpi
},
};
@ -99,7 +99,14 @@
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ }
+ },
+ .port6_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
};
-#ifdef CONFIG_PCI
@ -132,11 +139,11 @@
+
+ t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
+ t |= QCA955X_ETH_CFG_RGMII_EN;
+
+ __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
- ath79_register_pci();
+ __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
+
+ iounmap(base);
}
-#else
@ -172,13 +179,21 @@
+ mdiobus_register_board_info(ap136_mdio0_info,
+ ARRAY_SIZE(ap136_mdio0_info));
+
+ /* GMAC0 is connected to an AR8327 switch */
+ /* GMAC0 is connected to GMAC0 of the AR8327 switch via RGMII */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0xa6000000;
+
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to GMAC6 of the AR8327 switch via SGMII */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
+ ath79_register_eth(1);
}
MIPS_MACHINE(ATH79_MACH_AP136, "AP136", "Atheros AP136 reference board",