mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-24 21:29:55 +02:00
switch ar7 to 2.6.23
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9235 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
ejka
parent
4e869172ab
commit
afd00b4e04
@ -11,7 +11,7 @@ BOARD:=ar7
|
||||
BOARDNAME:=TI AR7
|
||||
FEATURES:=squashfs jffs2 atm
|
||||
|
||||
LINUX_VERSION:=2.6.22.4
|
||||
LINUX_VERSION:=2.6.23
|
||||
|
||||
include $(INCLUDE_DIR)/target.mk
|
||||
|
||||
|
||||
@ -1,187 +0,0 @@
|
||||
CONFIG_32BIT=y
|
||||
# CONFIG_64BIT is not set
|
||||
# CONFIG_64BIT_PHYS_ADDR is not set
|
||||
CONFIG_AR7=y
|
||||
CONFIG_AR7_GPIO=y
|
||||
CONFIG_AR7_WDT=y
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
CONFIG_ATM_DRIVERS=y
|
||||
CONFIG_BASE_SMALL=0
|
||||
CONFIG_BITREVERSE=y
|
||||
# CONFIG_BLK_DEV_INITRD is not set
|
||||
CONFIG_BOOT_ELF32=y
|
||||
# CONFIG_BROADCOM_PHY is not set
|
||||
# CONFIG_BT is not set
|
||||
CONFIG_CMDLINE="init=/etc/preinit rootfstype=squashfs,jffs2,"
|
||||
CONFIG_CPMAC=y
|
||||
# CONFIG_CPU_BIG_ENDIAN is not set
|
||||
CONFIG_CPU_HAS_LLSC=y
|
||||
CONFIG_CPU_HAS_PREFETCH=y
|
||||
CONFIG_CPU_HAS_SYNC=y
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
CONFIG_CPU_MIPS32=y
|
||||
CONFIG_CPU_MIPS32_R1=y
|
||||
# CONFIG_CPU_MIPS32_R2 is not set
|
||||
# CONFIG_CPU_MIPS64_R1 is not set
|
||||
# CONFIG_CPU_MIPS64_R2 is not set
|
||||
CONFIG_CPU_MIPSR1=y
|
||||
# CONFIG_CPU_NEVADA is not set
|
||||
# CONFIG_CPU_R10000 is not set
|
||||
# CONFIG_CPU_R3000 is not set
|
||||
# CONFIG_CPU_R4300 is not set
|
||||
# CONFIG_CPU_R4X00 is not set
|
||||
# CONFIG_CPU_R5000 is not set
|
||||
# CONFIG_CPU_R5432 is not set
|
||||
# CONFIG_CPU_R6000 is not set
|
||||
# CONFIG_CPU_R8000 is not set
|
||||
# CONFIG_CPU_RM7000 is not set
|
||||
# CONFIG_CPU_RM9000 is not set
|
||||
# CONFIG_CPU_SB1 is not set
|
||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
||||
# CONFIG_CPU_TX39XX is not set
|
||||
# CONFIG_CPU_TX49XX is not set
|
||||
# CONFIG_CPU_VR41XX is not set
|
||||
# CONFIG_DDB5477 is not set
|
||||
# CONFIG_DM9000 is not set
|
||||
CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
CONFIG_FIXED_MII_100_FDX=y
|
||||
# CONFIG_FIXED_MII_10_FDX is not set
|
||||
CONFIG_FIXED_PHY=y
|
||||
CONFIG_FS_POSIX_ACL=y
|
||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
|
||||
# CONFIG_GEN_RTC is not set
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
# CONFIG_I2C is not set
|
||||
# CONFIG_IDE is not set
|
||||
CONFIG_IRQ_CPU=y
|
||||
CONFIG_KALLSYMS=y
|
||||
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
||||
CONFIG_LEDS_AR7=y
|
||||
# CONFIG_MACH_ALCHEMY is not set
|
||||
# CONFIG_MACH_DECSTATION is not set
|
||||
# CONFIG_MACH_JAZZ is not set
|
||||
# CONFIG_MACH_VR41XX is not set
|
||||
CONFIG_MIPS=y
|
||||
# CONFIG_MIPS_ATLAS is not set
|
||||
# CONFIG_MIPS_COBALT is not set
|
||||
# CONFIG_MIPS_EV64120 is not set
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
||||
# CONFIG_MIPS_MALTA is not set
|
||||
CONFIG_MIPS_MT_DISABLED=y
|
||||
# CONFIG_MIPS_MT_SMP is not set
|
||||
# CONFIG_MIPS_MT_SMTC is not set
|
||||
# CONFIG_MIPS_SEAD is not set
|
||||
# CONFIG_MIPS_SIM is not set
|
||||
# CONFIG_MIPS_VPE_LOADER is not set
|
||||
# CONFIG_MOMENCO_OCELOT is not set
|
||||
# CONFIG_MOMENCO_OCELOT_3 is not set
|
||||
# CONFIG_MOMENCO_OCELOT_C is not set
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
CONFIG_MTD_AR7_PARTS=y
|
||||
CONFIG_MTD_BLKDEVS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
# CONFIG_MTD_BLOCK2MTD is not set
|
||||
CONFIG_MTD_CFI=y
|
||||
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_CFI_I1=y
|
||||
CONFIG_MTD_CFI_I2=y
|
||||
# CONFIG_MTD_CFI_I4 is not set
|
||||
# CONFIG_MTD_CFI_I8 is not set
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
CONFIG_MTD_CFI_STAA=y
|
||||
CONFIG_MTD_CFI_UTIL=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
# CONFIG_MTD_CMDLINE_PARTS is not set
|
||||
CONFIG_MTD_COMPLEX_MAPPINGS=y
|
||||
# CONFIG_MTD_CONCAT is not set
|
||||
# CONFIG_MTD_DEBUG is not set
|
||||
# CONFIG_MTD_DOC2000 is not set
|
||||
# CONFIG_MTD_DOC2001 is not set
|
||||
# CONFIG_MTD_DOC2001PLUS is not set
|
||||
CONFIG_MTD_GEN_PROBE=y
|
||||
# CONFIG_MTD_JEDECPROBE is not set
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||
# CONFIG_MTD_MTDRAM is not set
|
||||
# CONFIG_MTD_ONENAND is not set
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
# CONFIG_MTD_PHRAM is not set
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
|
||||
CONFIG_MTD_PHYSMAP_LEN=0
|
||||
CONFIG_MTD_PHYSMAP_START=0x10000000
|
||||
# CONFIG_MTD_PLATRAM is not set
|
||||
# CONFIG_MTD_RAM is not set
|
||||
# CONFIG_MTD_REDBOOT_PARTS is not set
|
||||
# CONFIG_MTD_ROM is not set
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
# CONFIG_NETDEV_1000 is not set
|
||||
CONFIG_NET_SCH_FIFO=y
|
||||
CONFIG_NF_CT_PROTO_GRE=m
|
||||
CONFIG_NF_NAT_PROTO_GRE=m
|
||||
# CONFIG_PAGE_SIZE_16KB is not set
|
||||
CONFIG_PAGE_SIZE_4KB=y
|
||||
# CONFIG_PAGE_SIZE_64KB is not set
|
||||
# CONFIG_PAGE_SIZE_8KB is not set
|
||||
CONFIG_PHYLIB=y
|
||||
# CONFIG_PMC_YOSEMITE is not set
|
||||
# CONFIG_PNPACPI is not set
|
||||
# CONFIG_PNX8550_JBS is not set
|
||||
# CONFIG_PNX8550_STB810 is not set
|
||||
# CONFIG_QSEMI_PHY is not set
|
||||
# CONFIG_RTC is not set
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
||||
CONFIG_SCSI_WAIT_SCAN=m
|
||||
# CONFIG_SERIAL_8250_EXTENDED is not set
|
||||
# CONFIG_SGI_IP22 is not set
|
||||
# CONFIG_SGI_IP27 is not set
|
||||
# CONFIG_SGI_IP32 is not set
|
||||
# CONFIG_SIBYTE_BIGSUR is not set
|
||||
# CONFIG_SIBYTE_CARMEL is not set
|
||||
# CONFIG_SIBYTE_CRHINE is not set
|
||||
# CONFIG_SIBYTE_CRHONE is not set
|
||||
# CONFIG_SIBYTE_LITTLESUR is not set
|
||||
# CONFIG_SIBYTE_PTSWARM is not set
|
||||
# CONFIG_SIBYTE_RHONE is not set
|
||||
# CONFIG_SIBYTE_SENTOSA is not set
|
||||
# CONFIG_SIBYTE_SWARM is not set
|
||||
# CONFIG_SMSC_PHY is not set
|
||||
# CONFIG_SOFT_WATCHDOG is not set
|
||||
# CONFIG_SPARSEMEM_STATIC is not set
|
||||
CONFIG_SWAP_IO_SPACE=y
|
||||
CONFIG_SYSVIPC_SYSCTL=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
||||
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
|
||||
CONFIG_SYS_SUPPORTS_KGDB=y
|
||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
||||
# CONFIG_TOSHIBA_JMR3927 is not set
|
||||
# CONFIG_TOSHIBA_RBTX4927 is not set
|
||||
# CONFIG_TOSHIBA_RBTX4938 is not set
|
||||
CONFIG_TRAD_SIGNALS=y
|
||||
# CONFIG_UNUSED_SYMBOLS is not set
|
||||
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
||||
# CONFIG_USB_ARCH_HAS_HCD is not set
|
||||
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
||||
# CONFIG_VGASTATE is not set
|
||||
CONFIG_VLYNQ=y
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
||||
@ -1,90 +0,0 @@
|
||||
diff -urN linux-2.6.22/arch/mips/Kconfig linux-2.6.22.new/arch/mips/Kconfig
|
||||
--- linux-2.6.22/arch/mips/Kconfig 2007-07-09 01:32:17.000000000 +0200
|
||||
+++ linux-2.6.22.new/arch/mips/Kconfig 2007-07-11 02:34:51.000000000 +0200
|
||||
@@ -15,6 +15,21 @@
|
||||
prompt "System type"
|
||||
default SGI_IP22
|
||||
|
||||
+config AR7
|
||||
+ bool "Texas Instruments AR7"
|
||||
+ select BOOT_ELF32
|
||||
+ select DMA_NONCOHERENT
|
||||
+ select IRQ_CPU
|
||||
+ select SWAP_IO_SPACE
|
||||
+ select SYS_HAS_CPU_MIPS32_R1
|
||||
+ select SYS_HAS_EARLY_PRINTK
|
||||
+ select SYS_SUPPORTS_32BIT_KERNEL
|
||||
+ select SYS_SUPPORTS_KGDB
|
||||
+ select SYS_SUPPORTS_LITTLE_ENDIAN
|
||||
+ select SYS_SUPPORTS_BIG_ENDIAN
|
||||
+ select GENERIC_GPIO
|
||||
+ select GENERIC_HARDIRQS_NO__DO_IRQ
|
||||
+
|
||||
config MACH_ALCHEMY
|
||||
bool "Alchemy processor based machines"
|
||||
|
||||
diff -urN linux-2.6.22/arch/mips/kernel/traps.c linux-2.6.22.new/arch/mips/kernel/traps.c
|
||||
--- linux-2.6.22/arch/mips/kernel/traps.c 2007-07-09 01:32:17.000000000 +0200
|
||||
+++ linux-2.6.22.new/arch/mips/kernel/traps.c 2007-07-11 02:32:39.000000000 +0200
|
||||
@@ -1074,11 +1074,23 @@ void *set_except_vector(int n, void *addr)
|
||||
unsigned long old_handler = exception_handlers[n];
|
||||
|
||||
exception_handlers[n] = handler;
|
||||
- if (n == 0 && cpu_has_divec) {
|
||||
- *(volatile u32 *)(ebase + 0x200) = 0x08000000 |
|
||||
- (0x03ffffff & (handler >> 2));
|
||||
- flush_icache_range(ebase + 0x200, ebase + 0x204);
|
||||
- }
|
||||
+ if (n == 0 && cpu_has_divec)
|
||||
+ if ((handler ^ (ebase + 4)) & 0xfc000000) {
|
||||
+ /* lui k0, 0x0000 */
|
||||
+ *(u32 *)(ebase + 0x200) = 0x3c1a0000 | (handler >> 16);
|
||||
+ /* ori k0, 0x0000 */
|
||||
+ *(u32 *)(ebase + 0x204) =
|
||||
+ 0x375a0000 | (handler & 0xffff);
|
||||
+ /* jr k0 */
|
||||
+ *(u32 *)(ebase + 0x208) = 0x03400008;
|
||||
+ /* nop */
|
||||
+ *(u32 *)(ebase + 0x20C) = 0x00000000;
|
||||
+ flush_icache_range(ebase + 0x200, ebase + 0x210);
|
||||
+ } else {
|
||||
+ *(volatile u32 *)(ebase + 0x200) =
|
||||
+ 0x08000000 | (0x03ffffff & (handler >> 2));
|
||||
+ flush_icache_range(ebase + 0x200, ebase + 0x204);
|
||||
+ }
|
||||
return (void *)old_handler;
|
||||
}
|
||||
|
||||
diff -urN linux-2.6.22/arch/mips/Makefile linux-2.6.22.new/arch/mips/Makefile
|
||||
--- linux-2.6.22/arch/mips/Makefile 2007-07-09 01:32:17.000000000 +0200
|
||||
+++ linux-2.6.22.new/arch/mips/Makefile 2007-07-11 02:32:39.000000000 +0200
|
||||
@@ -158,6 +158,13 @@
|
||||
#
|
||||
|
||||
#
|
||||
+# Texas Instruments AR7
|
||||
+#
|
||||
+core-$(CONFIG_AR7) += arch/mips/ar7/
|
||||
+cflags-$(CONFIG_AR7) += -Iinclude/asm-mips/ar7
|
||||
+load-$(CONFIG_AR7) += 0xffffffff94100000
|
||||
+
|
||||
+#
|
||||
# Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
|
||||
#
|
||||
core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
|
||||
diff -urN linux-2.6.22.4/include/asm-mips/page.h linux-2.6.22.4.new/include/asm-mips/page.h
|
||||
--- linux-2.6.22.4/include/asm-mips/page.h 2007-08-21 12:33:06.000000000 +0800
|
||||
+++ linux-2.6.22.4.new/include/asm-mips/page.h 2007-09-13 15:13:00.000000000 +0800
|
||||
@@ -187,8 +187,10 @@
|
||||
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
|
||||
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
|
||||
|
||||
-#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE)
|
||||
-#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET)
|
||||
+#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE + \
|
||||
+ PHYS_OFFSET)
|
||||
+#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET - \
|
||||
+ PHYS_OFFSET)
|
||||
|
||||
#include <asm-generic/memory_model.h>
|
||||
#include <asm-generic/page.h>
|
||||
@ -1,40 +0,0 @@
|
||||
diff -Nru linux-2.6.19.2/drivers/mtd/Kconfig linux-ar7/drivers/mtd/Kconfig
|
||||
--- linux-2.6.19.2/drivers/mtd/Kconfig 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/drivers/mtd/Kconfig 2007-02-03 22:47:10.000000000 +0700
|
||||
@@ -152,6 +152,12 @@
|
||||
for your particular device. It won't happen automatically. The
|
||||
'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
|
||||
|
||||
+config MTD_AR7_PARTS
|
||||
+ tristate "TI AR7 partitioning support"
|
||||
+ depends on MTD_PARTITIONS
|
||||
+ ---help---
|
||||
+ TI AR7 partitioning support
|
||||
+
|
||||
comment "User Modules And Translation Layers"
|
||||
depends on MTD
|
||||
|
||||
diff -Nru linux-2.6.19.2/drivers/mtd/Makefile linux-ar7/drivers/mtd/Makefile
|
||||
--- linux-2.6.19.2/drivers/mtd/Makefile 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/drivers/mtd/Makefile 2007-02-03 22:02:27.000000000 +0700
|
||||
@@ -12,6 +12,7 @@
|
||||
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
|
||||
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
|
||||
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
|
||||
+obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
|
||||
|
||||
# 'Users' - code which presents functionality to userspace.
|
||||
obj-$(CONFIG_MTD_CHAR) += mtdchar.o
|
||||
diff -Nru linux-2.6.19.2/drivers/mtd/maps/physmap.c linux-ar7/drivers/mtd/maps/physmap.c
|
||||
--- linux-2.6.19.2/drivers/mtd/maps/physmap.c 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/drivers/mtd/maps/physmap.c 2007-02-03 21:57:11.000000000 +0700
|
||||
@@ -74,7 +74,8 @@
|
||||
|
||||
static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL };
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
-static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
|
||||
+static const char *part_probe_types[] = {"cmdlinepart", "RedBoot",
|
||||
+ "ar7part", NULL };
|
||||
#endif
|
||||
|
||||
static int physmap_flash_probe(struct platform_device *dev)
|
||||
@ -1,30 +0,0 @@
|
||||
diff -ruN linux-2.6.19.2-orig/drivers/char/Kconfig linux-2.6.19.2-ar7/drivers/char/Kconfig
|
||||
--- linux-2.6.19.2-orig/drivers/char/Kconfig 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-ar7/drivers/char/Kconfig 2007-02-19 01:22:23.000000000 +0100
|
||||
@@ -920,6 +920,15 @@
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called mwave.
|
||||
|
||||
+config AR7_GPIO
|
||||
+ tristate "TI AR7 GPIO Support"
|
||||
+ depends on AR7
|
||||
+ help
|
||||
+ Give userspace access to the GPIO pins on the Texas Instruments AR7
|
||||
+ processors.
|
||||
+
|
||||
+ If compiled as a module, it will be called ar7_gpio.
|
||||
+
|
||||
config SCx200_GPIO
|
||||
tristate "NatSemi SCx200 GPIO Support"
|
||||
depends on SCx200
|
||||
diff -ruN linux-2.6.19.2-orig/drivers/char/Makefile linux-2.6.19.2-ar7/drivers/char/Makefile
|
||||
--- linux-2.6.19.2-orig/drivers/char/Makefile 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-ar7/drivers/char/Makefile 2007-02-19 01:22:23.000000000 +0100
|
||||
@@ -83,6 +83,7 @@
|
||||
obj-$(CONFIG_PPDEV) += ppdev.o
|
||||
obj-$(CONFIG_NWBUTTON) += nwbutton.o
|
||||
obj-$(CONFIG_NWFLASH) += nwflash.o
|
||||
+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o
|
||||
obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
|
||||
obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o
|
||||
obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o
|
||||
@ -1,27 +0,0 @@
|
||||
diff -ruN linux-2.6.19.2-orig/drivers/leds/Kconfig linux-2.6.19.2-ar7/drivers/leds/Kconfig
|
||||
--- linux-2.6.19.2-orig/drivers/leds/Kconfig 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-ar7/drivers/leds/Kconfig 2007-02-24 02:30:48.000000000 +0100
|
||||
@@ -19,6 +19,12 @@
|
||||
|
||||
comment "LED drivers"
|
||||
|
||||
+config LEDS_AR7
|
||||
+ tristate "LED Support for the TI AR7"
|
||||
+ depends LEDS_CLASS && AR7
|
||||
+ help
|
||||
+ This option enables support for the LEDs on TI AR7.
|
||||
+
|
||||
config LEDS_CORGI
|
||||
tristate "LED Support for the Sharp SL-C7x0 series"
|
||||
depends LEDS_CLASS && PXA_SHARP_C7xx
|
||||
diff -ruN linux-2.6.19.2-orig/drivers/leds/Makefile linux-2.6.19.2-ar7/drivers/leds/Makefile
|
||||
--- linux-2.6.19.2-orig/drivers/leds/Makefile 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-ar7/drivers/leds/Makefile 2007-02-24 02:29:44.000000000 +0100
|
||||
@@ -5,6 +5,7 @@
|
||||
obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
|
||||
|
||||
# LED Platform Drivers
|
||||
+obj-$(CONFIG_LEDS_AR7) += leds-ar7.o
|
||||
obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o
|
||||
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
|
||||
obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o
|
||||
@ -1,20 +0,0 @@
|
||||
Index: linux-2.6.22.4/drivers/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.22.4.orig/drivers/Kconfig 2007-10-06 01:09:43.000000000 +0800
|
||||
+++ linux-2.6.22.4/drivers/Kconfig 2007-10-06 01:12:19.000000000 +0800
|
||||
@@ -84,4 +84,6 @@
|
||||
|
||||
source "drivers/kvm/Kconfig"
|
||||
|
||||
+source "drivers/vlynq/Kconfig"
|
||||
+
|
||||
endmenu
|
||||
Index: linux-2.6.22.4/drivers/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.22.4.orig/drivers/Makefile 2007-10-06 01:09:43.000000000 +0800
|
||||
+++ linux-2.6.22.4/drivers/Makefile 2007-10-06 01:12:37.000000000 +0800
|
||||
@@ -81,3 +81,4 @@
|
||||
obj-$(CONFIG_DMA_ENGINE) += dma/
|
||||
obj-$(CONFIG_HID) += hid/
|
||||
obj-$(CONFIG_PPC_PS3) += ps3/
|
||||
+obj-$(CONFIG_VLYNQ) += vlynq/
|
||||
@ -1,27 +0,0 @@
|
||||
diff -ruN linux-2.6.19.2-orig/drivers/char/watchdog/Kconfig linux-2.6.19.2-ar7/drivers/char/watchdog/Kconfig
|
||||
--- linux-2.6.19.2-orig/drivers/char/watchdog/Kconfig 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-ar7/drivers/char/watchdog/Kconfig 2007-02-26 12:49:29.000000000 +0100
|
||||
@@ -544,6 +544,12 @@
|
||||
|
||||
# MIPS Architecture
|
||||
|
||||
+config AR7_WDT
|
||||
+ tristate "TI AR7 Watchdog Timer"
|
||||
+ depends on WATCHDOG && AR7
|
||||
+ help
|
||||
+ Hardware driver for the TI AR7 Watchdog Timer.
|
||||
+
|
||||
config INDYDOG
|
||||
tristate "Indy/I2 Hardware Watchdog"
|
||||
depends on WATCHDOG && SGI_IP22
|
||||
diff -ruN linux-2.6.19.2-orig/drivers/char/watchdog/Makefile linux-2.6.19.2-ar7/drivers/char/watchdog/Makefile
|
||||
--- linux-2.6.19.2-orig/drivers/char/watchdog/Makefile 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-ar7/drivers/char/watchdog/Makefile 2007-02-26 12:46:36.000000000 +0100
|
||||
@@ -71,6 +71,7 @@
|
||||
obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
|
||||
|
||||
# MIPS Architecture
|
||||
+obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
|
||||
obj-$(CONFIG_INDYDOG) += indydog.o
|
||||
|
||||
# S390 Architecture
|
||||
@ -1,30 +0,0 @@
|
||||
diff -Nru linux-2.6.19.2/drivers/net/Kconfig linux-ar7/drivers/net/Kconfig
|
||||
--- linux-2.6.19.2/drivers/net/Kconfig 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/drivers/net/Kconfig 2007-01-29 21:52:22.000000000 +0700
|
||||
@@ -1777,6 +1777,15 @@
|
||||
workstations.
|
||||
See <http://www.semiconductors.philips.com/pip/SAA9730_flyer_1>.
|
||||
|
||||
+config CPMAC
|
||||
+ tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
|
||||
+ depends on EXPERIMENTAL && AR7
|
||||
+ select PHYLIB
|
||||
+ select FIXED_PHY
|
||||
+ select FIXED_MII_100_FDX
|
||||
+ help
|
||||
+ TI AR7 CPMAC Ethernet support
|
||||
+
|
||||
config NET_POCKET
|
||||
bool "Pocket and portable adapters"
|
||||
depends on NET_ETHERNET && PARPORT
|
||||
diff -Nru linux-2.6.19.2/drivers/net/Makefile linux-ar7/drivers/net/Makefile
|
||||
--- linux-2.6.19.2/drivers/net/Makefile 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/drivers/net/Makefile 2007-01-29 21:52:22.000000000 +0700
|
||||
@@ -148,6 +148,7 @@
|
||||
obj-$(CONFIG_8139TOO) += 8139too.o
|
||||
obj-$(CONFIG_ZNET) += znet.o
|
||||
obj-$(CONFIG_LAN_SAA9730) += saa9730.o
|
||||
+obj-$(CONFIG_CPMAC) += cpmac.o
|
||||
obj-$(CONFIG_DEPCA) += depca.o
|
||||
obj-$(CONFIG_EWRK3) += ewrk3.o
|
||||
obj-$(CONFIG_ATP) += atp.o
|
||||
@ -1,93 +0,0 @@
|
||||
Index: linux-2.6.21.4/drivers/net/phy/fixed.c
|
||||
===================================================================
|
||||
--- linux-2.6.21.4.orig/drivers/net/phy/fixed.c 2007-06-11 16:30:06.418483448 +0200
|
||||
+++ linux-2.6.21.4/drivers/net/phy/fixed.c 2007-06-11 16:30:11.156763120 +0200
|
||||
@@ -187,6 +187,19 @@
|
||||
.driver = { .owner = THIS_MODULE,},
|
||||
};
|
||||
|
||||
+static void fixed_mdio_release (struct device * dev)
|
||||
+{
|
||||
+ struct phy_device *phydev = container_of(dev, struct phy_device, dev);
|
||||
+ struct mii_bus *bus = phydev->bus;
|
||||
+ struct fixed_info *fixed = bus->priv;
|
||||
+
|
||||
+ kfree(phydev);
|
||||
+ kfree(bus->dev);
|
||||
+ kfree(bus);
|
||||
+ kfree(fixed->regs);
|
||||
+ kfree(fixed);
|
||||
+}
|
||||
+
|
||||
/*-----------------------------------------------------------------------------
|
||||
* This func is used to create all the necessary stuff, bind
|
||||
* the fixed phy driver and register all it on the mdio_bus_type.
|
||||
@@ -221,6 +234,12 @@
|
||||
}
|
||||
|
||||
fixed->regs = kzalloc(MII_REGS_NUM*sizeof(int), GFP_KERNEL);
|
||||
+ if (NULL == fixed->regs) {
|
||||
+ kfree(dev);
|
||||
+ kfree(new_bus);
|
||||
+ kfree(fixed);
|
||||
+ return -ENOMEM;
|
||||
+ }
|
||||
fixed->regs_num = MII_REGS_NUM;
|
||||
fixed->phy_status.speed = speed;
|
||||
fixed->phy_status.duplex = duplex;
|
||||
@@ -249,8 +268,11 @@
|
||||
fixed->phydev = phydev;
|
||||
|
||||
if(NULL == phydev) {
|
||||
- err = -ENOMEM;
|
||||
- goto device_create_fail;
|
||||
+ kfree(dev);
|
||||
+ kfree(new_bus);
|
||||
+ kfree(fixed->regs);
|
||||
+ kfree(fixed);
|
||||
+ return -ENOMEM;
|
||||
}
|
||||
|
||||
phydev->irq = PHY_IGNORE_INTERRUPT;
|
||||
@@ -262,8 +283,33 @@
|
||||
else
|
||||
snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
|
||||
"fixed@%d:%d", speed, duplex);
|
||||
+
|
||||
phydev->bus = new_bus;
|
||||
|
||||
+#if 1
|
||||
+ phydev->dev.driver = &fixed_mdio_driver.driver;
|
||||
+ phydev->dev.release = fixed_mdio_release;
|
||||
+
|
||||
+ err = phydev->dev.driver->probe(&phydev->dev);
|
||||
+ if(err < 0) {
|
||||
+ printk(KERN_ERR "Phy %s: problems with fixed driver\n",
|
||||
+ phydev->dev.bus_id);
|
||||
+ kfree(phydev);
|
||||
+ kfree(dev);
|
||||
+ kfree(new_bus);
|
||||
+ kfree(fixed->regs);
|
||||
+ kfree(fixed);
|
||||
+ return err;
|
||||
+ }
|
||||
+
|
||||
+ err = device_register(&phydev->dev);
|
||||
+ if(err) {
|
||||
+ printk(KERN_ERR "Phy %s failed to register\n",
|
||||
+ phydev->dev.bus_id);
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+#else
|
||||
err = device_register(&phydev->dev);
|
||||
if(err) {
|
||||
printk(KERN_ERR "Phy %s failed to register\n",
|
||||
@@ -306,6 +354,7 @@
|
||||
kfree(fixed);
|
||||
|
||||
return err;
|
||||
+#endif
|
||||
}
|
||||
|
||||
|
||||
@ -1,54 +0,0 @@
|
||||
diff -urN linux-2.6.22.orig/drivers/serial/8250.c linux-2.6.22/drivers/serial/8250.c
|
||||
--- linux-2.6.22.orig/drivers/serial/8250.c 2007-07-09 01:32:17.000000000 +0200
|
||||
+++ linux-2.6.22/drivers/serial/8250.c 2007-07-11 03:08:57.000000000 +0200
|
||||
@@ -258,6 +258,13 @@
|
||||
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
|
||||
.flags = UART_CAP_FIFO,
|
||||
},
|
||||
+ [PORT_AR7] = {
|
||||
+ .name = "TI-AR7",
|
||||
+ .fifo_size = 16,
|
||||
+ .tx_loadsz = 16,
|
||||
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
|
||||
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
|
||||
+ },
|
||||
};
|
||||
|
||||
#if defined (CONFIG_SERIAL_8250_AU1X00)
|
||||
@@ -2453,7 +2453,11 @@
|
||||
{
|
||||
struct uart_8250_port *up = (struct uart_8250_port *)port;
|
||||
|
||||
+#ifdef CONFIG_AR7
|
||||
+ wait_for_xmitr(up, BOTH_EMPTY);
|
||||
+#else
|
||||
wait_for_xmitr(up, UART_LSR_THRE);
|
||||
+#endif
|
||||
serial_out(up, UART_TX, ch);
|
||||
}
|
||||
|
||||
diff -urN linux-2.6.22.orig/include/linux/serial_core.h linux-2.6.22/include/linux/serial_core.h
|
||||
--- linux-2.6.22.orig/include/linux/serial_core.h 2007-07-09 01:32:17.000000000 +0200
|
||||
+++ linux-2.6.22/include/linux/serial_core.h 2007-07-11 03:09:49.000000000 +0200
|
||||
@@ -40,6 +40,7 @@
|
||||
#define PORT_NS16550A 14
|
||||
#define PORT_XSCALE 15
|
||||
#define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */
|
||||
+#define PORT_AR7 16
|
||||
#define PORT_MAX_8250 16 /* max port ID */
|
||||
|
||||
/*
|
||||
diff -urN linux-2.6.22.orig/include/linux/serialP.h linux-2.6.22/include/linux/serialP.h
|
||||
--- linux-2.6.22.orig/include/linux/serialP.h 2007-07-09 01:32:17.000000000 +0200
|
||||
+++ linux-2.6.22/include/linux/serialP.h 2007-07-11 03:08:57.000000000 +0200
|
||||
@@ -135,6 +135,10 @@
|
||||
* the interrupt line _up_ instead of down, so if we register the IRQ
|
||||
* while the UART is in that state, we die in an IRQ storm. */
|
||||
#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
|
||||
+#elif defined(CONFIG_AR7)
|
||||
+/* This is how it is set up by bootloader... */
|
||||
+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1 \
|
||||
+ | UART_MCR_RTS | UART_MCR_DTR)
|
||||
#else
|
||||
#define ALPHA_KLUDGE_MCR 0
|
||||
#endif
|
||||
@ -1,7 +1,7 @@
|
||||
Index: linux-2.6.23-rc6/drivers/net/Kconfig
|
||||
Index: linux-2.6.23/drivers/net/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.23-rc6.orig/drivers/net/Kconfig 2007-09-21 16:24:02.000000000 +0800
|
||||
+++ linux-2.6.23-rc6/drivers/net/Kconfig 2007-09-21 16:24:13.000000000 +0800
|
||||
--- linux-2.6.23.orig/drivers/net/Kconfig 2007-10-10 13:52:54.000000000 +0800
|
||||
+++ linux-2.6.23/drivers/net/Kconfig 2007-10-10 13:53:54.000000000 +0800
|
||||
@@ -1965,6 +1965,15 @@
|
||||
To compile this driver as a module, choose M here: the module
|
||||
will be called sc92031. This is recommended.
|
||||
@ -18,11 +18,11 @@ Index: linux-2.6.23-rc6/drivers/net/Kconfig
|
||||
config NET_POCKET
|
||||
bool "Pocket and portable adapters"
|
||||
depends on PARPORT
|
||||
Index: linux-2.6.23-rc6/drivers/net/Makefile
|
||||
Index: linux-2.6.23/drivers/net/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.23-rc6.orig/drivers/net/Makefile 2007-09-21 16:24:02.000000000 +0800
|
||||
+++ linux-2.6.23-rc6/drivers/net/Makefile 2007-09-21 16:24:13.000000000 +0800
|
||||
@@ -155,6 +155,7 @@
|
||||
--- linux-2.6.23.orig/drivers/net/Makefile 2007-10-10 13:52:54.000000000 +0800
|
||||
+++ linux-2.6.23/drivers/net/Makefile 2007-10-10 13:53:54.000000000 +0800
|
||||
@@ -156,6 +156,7 @@
|
||||
obj-$(CONFIG_8139TOO) += 8139too.o
|
||||
obj-$(CONFIG_ZNET) += znet.o
|
||||
obj-$(CONFIG_LAN_SAA9730) += saa9730.o
|
||||
|
||||
Loading…
Reference in New Issue
Block a user