qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2025-04-21 12:27:27 +03:00
Code Activity

we don't support 2.6.26 for a long time now

Browse Source 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16544 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
kaloz
2009-06-23 13:29:23 +00:00
parent 08d6d41dda
commit afd995e1f5
47 changed files with 0 additions and 8775 deletions
Download Patch File Download Diff File Expand all files Collapse all files

85
target/linux/ar7/patches-2.6.26/100-board_support.patch
View File

@@ -1,85 +0,0 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -18,6 +18,23 @@ choice
prompt "System type"
default SGI_IP22
+config AR7
+ bool "Texas Instruments AR7"
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select CEVT_R4K
+ select CSRC_R4K
+ select IRQ_CPU
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_KGDB
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select GENERIC_GPIO
+ select GENERIC_HARDIRQS_NO__DO_IRQ
+
config MACH_ALCHEMY
bool "Alchemy processor based machines"
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1188,9 +1188,22 @@ void *set_except_vector(int n, void *add
exception_handlers[n] = handler;
if (n == 0 && cpu_has_divec) {
- *(u32 *)(ebase + 0x200) = 0x08000000 |
- (0x03ffffff & (handler >> 2));
- flush_icache_range(ebase + 0x200, ebase + 0x204);
+ if ((handler ^ (ebase + 4)) & 0xfc000000) {
+ /* lui k0, 0x0000 */
+ *(u32 *)(ebase + 0x200) = 0x3c1a0000 | (handler >> 16);
+ /* ori k0, 0x0000 */
+ *(u32 *)(ebase + 0x204) =
+ 0x375a0000 | (handler & 0xffff);
+ /* jr k0 */
+ *(u32 *)(ebase + 0x208) = 0x03400008;
+ /* nop */
+ *(u32 *)(ebase + 0x20C) = 0x00000000;
+ flush_icache_range(ebase + 0x200, ebase + 0x210);
+ } else {
+ *(u32 *)(ebase + 0x200) =
+ 0x08000000 | (0x03ffffff & (handler >> 2));
+ flush_icache_range(ebase + 0x200, ebase + 0x204);
+ }
}
return (void *)old_handler;
}
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -167,6 +167,13 @@ libs-$(CONFIG_SIBYTE_CFE) += arch/mips/s
#
#
+# Texas Instruments AR7
+#
+core-$(CONFIG_AR7) += arch/mips/ar7/
+cflags-$(CONFIG_AR7) += -Iinclude/asm-mips/ar7
+load-$(CONFIG_AR7) += 0xffffffff94100000
+
+#
# Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
#
core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
--- a/include/asm-mips/page.h
+++ b/include/asm-mips/page.h
@@ -182,8 +182,10 @@ typedef struct { unsigned long pgprot; }
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE)
-#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET)
+#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE + \
+ PHYS_OFFSET)
+#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET - \
+ PHYS_OFFSET)
#include <asm-generic/memory_model.h>
#include <asm-generic/page.h>

26
target/linux/ar7/patches-2.6.26/110-flash.patch
View File

@@ -1,26 +0,0 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -190,6 +190,12 @@ config MTD_MYLOADER_PARTS
You will still need the parsing functions to be called by the driver
for your particular device. It won't happen automatically.
+config MTD_AR7_PARTS
+ tristate "TI AR7 partitioning support"
+ depends on MTD_PARTITIONS
+ ---help---
+ TI AR7 partitioning support
+
comment "User Modules And Translation Layers"
config MTD_CHAR
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -87,7 +87,7 @@ static int physmap_flash_remove(struct p
static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL };
#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "ar7part", NULL };
#endif
static int physmap_flash_probe(struct platform_device *dev)

28
target/linux/ar7/patches-2.6.26/120-gpio_chrdev.patch
View File

@@ -1,28 +0,0 @@
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -960,6 +960,15 @@ config MWAVE
To compile this driver as a module, choose M here: the
module will be called mwave.
+config AR7_GPIO
+ tristate "TI AR7 GPIO Support"
+ depends on AR7
+ help
+ Give userspace access to the GPIO pins on the Texas Instruments AR7
+ processors.
+
+ If compiled as a module, it will be called ar7_gpio.
+
config SCx200_GPIO
tristate "NatSemi SCx200 GPIO Support"
depends on SCx200
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -91,6 +91,7 @@ obj-$(CONFIG_COBALT_LCD) += lcd.o
obj-$(CONFIG_PPDEV) += ppdev.o
obj-$(CONFIG_NWBUTTON) += nwbutton.o
obj-$(CONFIG_NWFLASH) += nwflash.o
+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o
obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o
obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o

19
target/linux/ar7/patches-2.6.26/130-vlynq.patch
View File

@@ -1,19 +0,0 @@
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -100,5 +100,7 @@ source "drivers/auxdisplay/Kconfig"
source "drivers/uio/Kconfig"
+source "drivers/vlynq/Kconfig"
+
source "drivers/xen/Kconfig"
endmenu
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -92,5 +92,6 @@ obj-$(CONFIG_DCA) += dca/
obj-$(CONFIG_HID) += hid/
obj-$(CONFIG_PPC_PS3) += ps3/
obj-$(CONFIG_OF) += of/
+obj-$(CONFIG_VLYNQ) += vlynq/
obj-$(CONFIG_SSB) += ssb/
obj-$(CONFIG_VIRTIO) += virtio/

11
target/linux/ar7/patches-2.6.26/150-cpmac_not_broken.patch
View File

@@ -1,11 +0,0 @@
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1867,7 +1867,7 @@ config SC92031
config CPMAC
tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
- depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN
+ depends on NET_ETHERNET && EXPERIMENTAL && AR7
select PHYLIB
help
TI AR7 CPMAC Ethernet support

40
target/linux/ar7/patches-2.6.26/500-serial_kludge.patch
View File

@@ -1,40 +0,0 @@
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -266,6 +266,13 @@ static const struct serial8250_config ua
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
.flags = UART_CAP_FIFO,
},
+ [PORT_AR7] = {
+ .name = "TI-AR7",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
};
#if defined (CONFIG_SERIAL_8250_AU1X00)
@@ -2524,7 +2531,11 @@ static void serial8250_console_putchar(s
{
struct uart_8250_port *up = (struct uart_8250_port *)port;
+#ifdef CONFIG_AR7
+ wait_for_xmitr(up, BOTH_EMPTY);
+#else
wait_for_xmitr(up, UART_LSR_THRE);
+#endif
serial_out(up, UART_TX, ch);
}
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -40,7 +40,8 @@
#define PORT_NS16550A 14
#define PORT_XSCALE 15
#define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */
-#define PORT_MAX_8250 16 /* max port ID */
+#define PORT_AR7 17
+#define PORT_MAX_8250 17 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed

70
target/linux/ar7/patches-2.6.26/900-cpmac_multiqueue.patch
View File

@@ -1,70 +0,0 @@
This patch fixes the network driver cpmac.c for compilation with
configuration option CONFIG_NETDEVICES_MULTIQUEUE.
These compiler warnings are fixed by the patch:
drivers/net/cpmac.c: In function 'cpmac_end_xmit':
drivers/net/cpmac.c:630: warning: passing argument 2 of 'netif_subqueue_stopped' makes pointer from integer without a cast
drivers/net/cpmac.c:641: warning: passing argument 2 of 'netif_subqueue_stopped' makes pointer from integer without a cast
drivers/net/cpmac.c: In function 'cpmac_probe':
drivers/net/cpmac.c:1128: warning: unused variable 'i'
During runtime, the unpatched driver raises a fatal runtime exception.
This is fixed by calling __netif_subqueue_stopped instead
of netif_subqueue_stopped, too.
Two additional code parts were modified for CONFIG_NETDEVICES_MULTIQUEUE
because other drivers do it in the same way.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -627,7 +627,7 @@ static void cpmac_end_xmit(struct net_de
dev_kfree_skb_irq(desc->skb);
desc->skb = NULL;
#ifdef CONFIG_NETDEVICES_MULTIQUEUE
- if (netif_subqueue_stopped(dev, queue))
+ if (__netif_subqueue_stopped(dev, queue))
netif_wake_subqueue(dev, queue);
#else
if (netif_queue_stopped(dev))
@@ -638,7 +638,7 @@ static void cpmac_end_xmit(struct net_de
printk(KERN_WARNING
"%s: end_xmit: spurious interrupt\n", dev->name);
#ifdef CONFIG_NETDEVICES_MULTIQUEUE
- if (netif_subqueue_stopped(dev, queue))
+ if (__netif_subqueue_stopped(dev, queue))
netif_wake_subqueue(dev, queue);
#else
if (netif_queue_stopped(dev))
@@ -1124,7 +1124,7 @@ static int external_switch;
static int __devinit cpmac_probe(struct platform_device *pdev)
{
- int rc, phy_id, i;
+ int rc, phy_id;
char *mdio_bus_id = "0";
struct resource *mem;
struct cpmac_priv *priv;
@@ -1152,7 +1152,11 @@ static int __devinit cpmac_probe(struct
}
}
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);
+#else
+ dev = alloc_etherdev(sizeof(*priv));
+#endif
if (!dev) {
printk(KERN_ERR "cpmac: Unable to allocate net_device\n");
@@ -1179,7 +1183,9 @@ static int __devinit cpmac_probe(struct
dev->set_multicast_list = cpmac_set_multicast_list;
dev->tx_timeout = cpmac_tx_timeout;
dev->ethtool_ops = &cpmac_ethtool_ops;
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
dev->features |= NETIF_F_MULTI_QUEUE;
+#endif
netif_napi_add(dev, &priv->napi, cpmac_poll, 64);

27
target/linux/ar7/patches-2.6.26/900-temporary_cpmac_hack.diff
View File

@@ -1,27 +0,0 @@
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -948,7 +948,8 @@ static void cpmac_adjust_link(struct net
int new_state = 0;
spin_lock(&priv->lock);
- if (priv->phy->link) {
+ if (1 /* priv->phy->link */) {
+ netif_carrier_on(dev);
netif_start_queue(dev);
if (priv->phy->duplex != priv->oldduplex) {
new_state = 1;
@@ -960,11 +961,11 @@ static void cpmac_adjust_link(struct net
priv->oldspeed = priv->phy->speed;
}
- if (!priv->oldlink) {
+ /*if (!priv->oldlink) {
new_state = 1;
- priv->oldlink = 1;
+ priv->oldlink = 1;*/
netif_schedule(dev);
- }
+ /*}*/
} else if (priv->oldlink) {
netif_stop_queue(dev);
new_state = 1;