linux: generic: add support for 3.1-rc1

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27940 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/generic/patches-3.1/006-arm_kernel_xz_support.patch

@@ -0,0 +1,93 @@
+From 2d303b4683145f7dbc918bd14d04e1396581b2ce Mon Sep 17 00:00:00 2001
+From: Imre Kaloz <kaloz@openwrt.org>
+Date: Thu, 7 Jul 2011 12:05:21 +0200
+Subject: [PATCH] ARM: support XZ compressed kernels
+
+Wire up support for the XZ decompressor
+
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+---
+ arch/arm/Kconfig                        |    1 +
+ arch/arm/boot/compressed/Makefile       |   11 +++++++++--
+ arch/arm/boot/compressed/decompress.c   |    4 ++++
+ arch/arm/boot/compressed/piggy.xzkern.S |    6 ++++++
+ lib/xz/xz_dec_stream.c                  |    1 +
+ 5 files changed, 21 insertions(+), 2 deletions(-)
+ create mode 100644 arch/arm/boot/compressed/piggy.xzkern.S
+
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -20,6 +20,7 @@ config ARM
+ 	select HAVE_KERNEL_GZIP
+ 	select HAVE_KERNEL_LZO
+ 	select HAVE_KERNEL_LZMA
++	select HAVE_KERNEL_XZ
+ 	select HAVE_IRQ_WORK
+ 	select HAVE_PERF_EVENTS
+ 	select PERF_USE_VMALLOC
+--- a/arch/arm/boot/compressed/Makefile
++++ b/arch/arm/boot/compressed/Makefile
+@@ -88,13 +88,14 @@ SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/
+ suffix_$(CONFIG_KERNEL_GZIP) = gzip
+ suffix_$(CONFIG_KERNEL_LZO)  = lzo
+ suffix_$(CONFIG_KERNEL_LZMA) = lzma
++suffix_$(CONFIG_KERNEL_XZ)   = xzkern
+ 
+ targets       := vmlinux vmlinux.lds \
+ 		 piggy.$(suffix_y) piggy.$(suffix_y).o \
+ 		 font.o font.c head.o misc.o $(OBJS)
+ 
+ # Make sure files are removed during clean
+-extra-y       += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S
++extra-y       += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern lib1funcs.S ashldi3.S
+ 
+ ifeq ($(CONFIG_FUNCTION_TRACER),y)
+ ORIG_CFLAGS := $(KBUILD_CFLAGS)
+@@ -139,8 +140,14 @@ bad_syms=$$($(CROSS_COMPILE)nm $@ | sed
+   ( echo "following symbols must have non local/private scope:" >&2; \
+     echo "$$bad_syms" >&2; rm -f $@; false )
+ 
++# For __aeabi_llsl
++ashldi3 = $(obj)/ashldi3.o
++
++$(obj)/ashldi3.S: $(srctree)/arch/$(SRCARCH)/lib/ashldi3.S FORCE
++	$(call cmd,shipped)
++
+ $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
+-	 	$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
++	 	$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) FORCE
+ 	$(call if_changed,ld)
+ 	@$(check_for_bad_syms)
+ 
+--- a/arch/arm/boot/compressed/decompress.c
++++ b/arch/arm/boot/compressed/decompress.c
+@@ -44,6 +44,10 @@ extern void error(char *);
+ #include "../../../../lib/decompress_unlzma.c"
+ #endif
+ 
++#ifdef CONFIG_KERNEL_XZ
++#include "../../../../lib/decompress_unxz.c"
++#endif
++
+ int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
+ {
+ 	return decompress(input, len, NULL, NULL, output, NULL, error);
+--- /dev/null
++++ b/arch/arm/boot/compressed/piggy.xzkern.S
+@@ -0,0 +1,6 @@
++	.section .piggydata,#alloc
++	.globl	input_data
++input_data:
++	.incbin	"arch/arm/boot/compressed/piggy.xzkern"
++	.globl	input_data_end
++input_data_end:
+--- a/lib/xz/xz_dec_stream.c
++++ b/lib/xz/xz_dec_stream.c
+@@ -9,6 +9,7 @@
+ 
+ #include "xz_private.h"
+ #include "xz_stream.h"
++#include <linux/kernel.h>
+ 
+ /* Hash used to validate the Index field */
+ struct xz_dec_hash {

target/linux/generic/patches-3.1/110-fix_mtd_include.patch

@@ -0,0 +1,10 @@
+--- a/include/linux/mtd/physmap.h
++++ b/include/linux/mtd/physmap.h
+@@ -17,6 +17,7 @@
+ 
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
+ 
+ struct map_info;
+ struct platform_device;

target/linux/generic/patches-3.1/200-fix_localversion.patch

@@ -0,0 +1,11 @@
+--- a/scripts/setlocalversion
++++ b/scripts/setlocalversion
+@@ -168,7 +168,7 @@ else
+ 	# annotated or signed tagged state (as git describe only
+ 	# looks at signed or annotated tags - git tag -a/-s) and
+ 	# LOCALVERSION= is not specified
+-	if test "${LOCALVERSION+set}" != "set"; then
++	if test "${CONFIG_LOCALVERSION+set}" != "set"; then
+ 		scm=$(scm_version --short)
+ 		res="$res${scm:++}"
+ 	fi

target/linux/generic/patches-3.1/201-extra_optimization.patch

@@ -0,0 +1,24 @@
+--- a/Makefile
++++ b/Makefile
+@@ -559,9 +559,9 @@ endif # $(dot-config)
+ all: vmlinux
+ 
+ ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+-KBUILD_CFLAGS	+= -Os
++KBUILD_CFLAGS	+= -Os -fno-caller-saves
+ else
+-KBUILD_CFLAGS	+= -O2
++KBUILD_CFLAGS	+= -O2 -fno-reorder-blocks -fno-tree-ch -fno-caller-saves
+ endif
+ 
+ include $(srctree)/arch/$(SRCARCH)/Makefile
+@@ -620,6 +620,9 @@ endif
+ NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+ CHECKFLAGS     += $(NOSTDINC_FLAGS)
+ 
++# improve gcc optimization
++CFLAGS += $(call cc-option,-funit-at-a-time,)
++
+ # warn about C99 declaration after statement
+ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
+ 

target/linux/generic/patches-3.1/210-darwin_scripts_include.patch

@@ -0,0 +1,78 @@
+--- a/scripts/kallsyms.c
++++ b/scripts/kallsyms.c
+@@ -22,6 +22,35 @@
+ #include <stdlib.h>
+ #include <string.h>
+ #include <ctype.h>
++#ifdef __APPLE__
++/* Darwin has no memmem implementation, this one is ripped of the uClibc-0.9.28 source */
++void *memmem (const void *haystack, size_t haystack_len,
++                          const void *needle,  size_t needle_len)
++{
++  const char *begin;
++  const char *const last_possible
++    = (const char *) haystack + haystack_len - needle_len;
++
++  if (needle_len == 0)
++    /* The first occurrence of the empty string is deemed to occur at
++       the beginning of the string.  */
++    return (void *) haystack;
++
++  /* Sanity check, otherwise the loop might search through the whole
++     memory.  */
++  if (__builtin_expect (haystack_len < needle_len, 0))
++    return NULL;
++
++  for (begin = (const char *) haystack; begin <= last_possible; ++begin)
++    if (begin[0] == ((const char *) needle)[0] &&
++        !memcmp ((const void *) &begin[1],
++                 (const void *) ((const char *) needle + 1),
++                 needle_len - 1))
++      return (void *) begin;
++
++  return NULL;
++}
++#endif
+ 
+ #ifndef ARRAY_SIZE
+ #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof(arr[0]))
+--- a/scripts/kconfig/Makefile
++++ b/scripts/kconfig/Makefile
+@@ -148,6 +148,9 @@ check-lxdialog  := $(srctree)/$(src)/lxd
+ # we really need to do so. (Do not call gcc as part of make mrproper)
+ HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
+                     -DLOCALE
++ifeq ($(shell uname -s),Darwin)
++HOST_LOADLIBES  += -lncurses
++endif
+ 
+ # ===========================================================================
+ # Shared Makefile for the various kconfig executables:
+--- a/scripts/mod/mk_elfconfig.c
++++ b/scripts/mod/mk_elfconfig.c
+@@ -1,7 +1,11 @@
+ #include <stdio.h>
+ #include <stdlib.h>
+ #include <string.h>
++#ifndef __APPLE__
+ #include <elf.h>
++#else
++#include "../../../../../tools/sstrip/include/elf.h"
++#endif
+ 
+ int
+ main(int argc, char **argv)
+--- a/scripts/mod/modpost.h
++++ b/scripts/mod/modpost.h
+@@ -7,7 +7,11 @@
+ #include <sys/mman.h>
+ #include <fcntl.h>
+ #include <unistd.h>
++#if !(defined(__APPLE__) || defined(__CYGWIN__))
+ #include <elf.h>
++#else
++#include "../../../../../tools/sstrip/include/elf.h"
++#endif
+ 
+ #include "elfconfig.h"
+ 

target/linux/generic/patches-3.1/211-stddef_include.patch

@@ -0,0 +1,17 @@
+--- a/include/linux/stddef.h
++++ b/include/linux/stddef.h
+@@ -16,6 +16,7 @@ enum {
+ 	false	= 0,
+ 	true	= 1
+ };
++#endif /* __KERNEL__ */
+ 
+ #undef offsetof
+ #ifdef __compiler_offsetof
+@@ -23,6 +24,5 @@ enum {
+ #else
+ #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+ #endif
+-#endif /* __KERNEL__ */
+ 
+ #endif

target/linux/generic/patches-3.1/220-module_exports.patch

@@ -0,0 +1,89 @@
+--- a/include/asm-generic/vmlinux.lds.h
++++ b/include/asm-generic/vmlinux.lds.h
+@@ -52,6 +52,27 @@
+ #define LOAD_OFFSET 0
+ #endif
+ 
++#ifndef SYMTAB_KEEP_STR
++#define SYMTAB_KEEP_STR *(__ksymtab_strings+*)
++#define SYMTAB_DISCARD_STR
++#else
++#define SYMTAB_DISCARD_STR *(__ksymtab_strings+*)
++#endif
++
++#ifndef SYMTAB_KEEP
++#define SYMTAB_KEEP *(SORT(___ksymtab+*))
++#define SYMTAB_DISCARD
++#else
++#define SYMTAB_DISCARD *(SORT(___ksymtab+*))
++#endif
++
++#ifndef SYMTAB_KEEP_GPL
++#define SYMTAB_KEEP_GPL *(SORT(___ksymtab_gpl+*))
++#define SYMTAB_DISCARD_GPL
++#else
++#define SYMTAB_DISCARD_GPL *(SORT(___ksymtab_gpl+*))
++#endif
++
+ #ifndef SYMBOL_PREFIX
+ #define VMLINUX_SYMBOL(sym) sym
+ #else
+@@ -276,14 +297,14 @@
+ 	/* Kernel symbol table: Normal symbols */			\
+ 	__ksymtab         : AT(ADDR(__ksymtab) - LOAD_OFFSET) {		\
+ 		VMLINUX_SYMBOL(__start___ksymtab) = .;			\
+-		*(SORT(___ksymtab+*))					\
++		SYMTAB_KEEP						\
+ 		VMLINUX_SYMBOL(__stop___ksymtab) = .;			\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: GPL-only symbols */			\
+ 	__ksymtab_gpl     : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) {	\
+ 		VMLINUX_SYMBOL(__start___ksymtab_gpl) = .;		\
+-		*(SORT(___ksymtab_gpl+*))				\
++		SYMTAB_KEEP_GPL						\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .;		\
+ 	}								\
+ 									\
+@@ -345,7 +366,7 @@
+ 									\
+ 	/* Kernel symbol table: strings */				\
+         __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) {	\
+-		*(__ksymtab_strings)					\
++		SYMTAB_KEEP_STR						\
+ 	}								\
+ 									\
+ 	/* __*init sections */						\
+@@ -677,6 +698,9 @@
+ 	EXIT_TEXT							\
+ 	EXIT_DATA							\
+ 	EXIT_CALL							\
++	SYMTAB_DISCARD							\
++	SYMTAB_DISCARD_GPL						\
++	SYMTAB_DISCARD_STR						\
+ 	*(.discard)							\
+ 	*(.discard.*)							\
+ 	}
+--- a/include/linux/module.h
++++ b/include/linux/module.h
+@@ -232,12 +232,19 @@ struct module_use {
+ #define __CRC_SYMBOL(sym, sec)
+ #endif
+ 
++#ifdef MODULE
++#define __EXPORT_SUFFIX(sym)
++#else
++#define __EXPORT_SUFFIX(sym) "+" #sym
++#endif
++
+ /* For every exported symbol, place a struct in the __ksymtab section */
+ #define __EXPORT_SYMBOL(sym, sec)				\
+ 	extern typeof(sym) sym;					\
+ 	__CRC_SYMBOL(sym, sec)					\
+ 	static const char __kstrtab_##sym[]			\
+-	__attribute__((section("__ksymtab_strings"), aligned(1))) \
++	__attribute__((section("__ksymtab_strings"		\
++	  __EXPORT_SUFFIX(sym)), aligned(1)))			\
+ 	= MODULE_SYMBOL_PREFIX #sym;                    	\
+ 	static const struct kernel_symbol __ksymtab_##sym	\
+ 	__used							\

target/linux/generic/patches-3.1/230-openwrt_lzma_options.patch

@@ -0,0 +1,54 @@
+--- a/scripts/Makefile.lib
++++ b/scripts/Makefile.lib
+@@ -292,7 +292,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
+ 
+ quiet_cmd_lzma = LZMA    $@
+ cmd_lzma = (cat $(filter-out FORCE,$^) | \
+-	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
++	lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ 	(rm -f $@ ; false)
+ 
+ quiet_cmd_lzo = LZO     $@
+--- a/scripts/gen_initramfs_list.sh
++++ b/scripts/gen_initramfs_list.sh
+@@ -226,7 +226,7 @@ cpio_list=
+ output="/dev/stdout"
+ output_file=""
+ is_cpio_compressed=
+-compr="gzip -n -9 -f"
++compr="gzip -n -9 -f -"
+ 
+ arg="$1"
+ case "$arg" in
+@@ -240,9 +240,9 @@ case "$arg" in
+ 		output_file="$1"
+ 		cpio_list="$(mktemp ${TMPDIR:-/tmp}/cpiolist.XXXXXX)"
+ 		output=${cpio_list}
+-		echo "$output_file" | grep -q "\.gz$" && compr="gzip -n -9 -f"
+-		echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f"
+-		echo "$output_file" | grep -q "\.lzma$" && compr="lzma -9 -f"
++		echo "$output_file" | grep -q "\.gz$" && compr="gzip -n -9 -f -"
++		echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f -"
++		echo "$output_file" | grep -q "\.lzma$" && compr="lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so"
+ 		echo "$output_file" | grep -q "\.xz$" && \
+ 				compr="xz --check=crc32 --lzma2=dict=1MiB"
+ 		echo "$output_file" | grep -q "\.lzo$" && compr="lzop -9 -f"
+@@ -303,7 +303,7 @@ if [ ! -z ${output_file} ]; then
+ 	if [ "${is_cpio_compressed}" = "compressed" ]; then
+ 		cat ${cpio_tfile} > ${output_file}
+ 	else
+-		(cat ${cpio_tfile} | ${compr}  - > ${output_file}) \
++		(cat ${cpio_tfile} | ${compr} > ${output_file}) \
+ 		|| (rm -f ${output_file} ; false)
+ 	fi
+ 	[ -z ${cpio_file} ] && rm ${cpio_tfile}
+--- a/lib/decompress.c
++++ b/lib/decompress.c
+@@ -40,6 +40,7 @@ static const struct compress_format {
+ 	{ {037, 0236}, "gzip", gunzip },
+ 	{ {0x42, 0x5a}, "bzip2", bunzip2 },
+ 	{ {0x5d, 0x00}, "lzma", unlzma },
++	{ {0x6d, 0x00}, "lzma-openwrt", unlzma },
+ 	{ {0xfd, 0x37}, "xz", unxz },
+ 	{ {0x89, 0x4c}, "lzo", unlzo },
+ 	{ {0, 0}, NULL, NULL }

target/linux/generic/patches-3.1/250-netfilter_depends.patch

@@ -0,0 +1,18 @@
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -163,7 +163,6 @@ config NF_CONNTRACK_FTP
+ 
+ config NF_CONNTRACK_H323
+ 	tristate "H.323 protocol support"
+-	depends on (IPV6 || IPV6=n)
+ 	depends on NETFILTER_ADVANCED
+ 	help
+ 	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
+@@ -611,7 +610,6 @@ config NETFILTER_XT_TARGET_SECMARK
+ 
+ config NETFILTER_XT_TARGET_TCPMSS
+ 	tristate '"TCPMSS" target support'
+-	depends on (IPV6 || IPV6=n)
+ 	default m if NETFILTER_ADVANCED=n
+ 	---help---
+ 	  This option adds a `TCPMSS' target, which allows you to alter the

target/linux/generic/patches-3.1/251-sound_kconfig.patch

@@ -0,0 +1,11 @@
+--- a/sound/core/Kconfig
++++ b/sound/core/Kconfig
+@@ -8,7 +8,7 @@ config SND_PCM
+ 	select GCD
+ 
+ config SND_HWDEP
+-	tristate
++	tristate "Sound hardware support"
+ 
+ config SND_RAWMIDI
+ 	tristate

target/linux/generic/patches-3.1/252-mv_cesa_depends.patch

@@ -0,0 +1,10 @@
+--- a/drivers/crypto/Kconfig
++++ b/drivers/crypto/Kconfig
+@@ -172,6 +172,7 @@ config CRYPTO_DEV_MV_CESA
+ 	depends on PLAT_ORION
+ 	select CRYPTO_ALGAPI
+ 	select CRYPTO_AES
++	select CRYPTO_HASH2
+ 	select CRYPTO_BLKCIPHER2
+ 	help
+ 	  This driver allows you to utilize the Cryptographic Engines and

target/linux/generic/patches-3.1/253-ssb_b43_default_on.patch

@@ -0,0 +1,29 @@
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -29,6 +29,7 @@ config SSB_SPROM
+ config SSB_BLOCKIO
+ 	bool
+ 	depends on SSB
++	default y
+ 
+ config SSB_PCIHOST_POSSIBLE
+ 	bool
+@@ -49,7 +50,7 @@ config SSB_PCIHOST
+ config SSB_B43_PCI_BRIDGE
+ 	bool
+ 	depends on SSB_PCIHOST
+-	default n
++	default y
+ 
+ config SSB_PCMCIAHOST_POSSIBLE
+ 	bool
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -17,6 +17,7 @@ config BCMA
+ config BCMA_BLOCKIO
+ 	bool
+ 	depends on BCMA
++	default y
+ 
+ config BCMA_HOST_PCI_POSSIBLE
+ 	bool

target/linux/generic/patches-3.1/254-textsearch_kconfig_hacks.patch

@@ -0,0 +1,23 @@
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -197,16 +197,16 @@ config BCH_CONST_T
+ # Textsearch support is select'ed if needed
+ #
+ config TEXTSEARCH
+-	boolean
++	boolean	"Textsearch support"
+ 
+ config TEXTSEARCH_KMP
+-	tristate
++	tristate "Textsearch KMP"
+ 
+ config TEXTSEARCH_BM
+-	tristate
++	tristate "Textsearch BM"
+ 
+ config TEXTSEARCH_FSM
+-	tristate
++	tristate "Textsearch FSM"
+ 
+ config BTREE
+ 	boolean

target/linux/generic/patches-3.1/255-lib80211_kconfig_hacks.patch

@@ -0,0 +1,19 @@
+--- a/net/wireless/Kconfig
++++ b/net/wireless/Kconfig
+@@ -142,13 +142,13 @@ config LIB80211
+ 	  you want this built into your kernel.
+ 
+ config LIB80211_CRYPT_WEP
+-	tristate
++	tristate "LIB80211_CRYPT_WEP"
+ 
+ config LIB80211_CRYPT_CCMP
+-	tristate
++	tristate "LIB80211_CRYPT_CCMP"
+ 
+ config LIB80211_CRYPT_TKIP
+-	tristate
++	tristate "LIB80211_CRYPT_TKIP"
+ 
+ config LIB80211_DEBUG
+ 	bool "lib80211 debugging messages"

target/linux/generic/patches-3.1/256-crypto_add_kconfig_prompts.patch

@@ -0,0 +1,47 @@
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -31,7 +31,7 @@ config CRYPTO_FIPS
+ 	  this is.
+ 
+ config CRYPTO_ALGAPI
+-	tristate
++	tristate "ALGAPI"
+ 	select CRYPTO_ALGAPI2
+ 	help
+ 	  This option provides the API for cryptographic algorithms.
+@@ -40,7 +40,7 @@ config CRYPTO_ALGAPI2
+ 	tristate
+ 
+ config CRYPTO_AEAD
+-	tristate
++	tristate "AEAD"
+ 	select CRYPTO_AEAD2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -49,7 +49,7 @@ config CRYPTO_AEAD2
+ 	select CRYPTO_ALGAPI2
+ 
+ config CRYPTO_BLKCIPHER
+-	tristate
++	tristate "BLKCIPHER"
+ 	select CRYPTO_BLKCIPHER2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -60,7 +60,7 @@ config CRYPTO_BLKCIPHER2
+ 	select CRYPTO_WORKQUEUE
+ 
+ config CRYPTO_HASH
+-	tristate
++	tristate "HASH"
+ 	select CRYPTO_HASH2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -69,7 +69,7 @@ config CRYPTO_HASH2
+ 	select CRYPTO_ALGAPI2
+ 
+ config CRYPTO_RNG
+-	tristate
++	tristate "RNG"
+ 	select CRYPTO_RNG2
+ 	select CRYPTO_ALGAPI
+ 

target/linux/generic/patches-3.1/257-wireless_ext_kconfig_hack.patch

@@ -0,0 +1,22 @@
+--- a/net/wireless/Kconfig
++++ b/net/wireless/Kconfig
+@@ -1,5 +1,5 @@
+ config WIRELESS_EXT
+-	bool
++	bool "Wireless extensions"
+ 
+ config WEXT_CORE
+ 	def_bool y
+@@ -11,10 +11,10 @@ config WEXT_PROC
+ 	depends on WEXT_CORE
+ 
+ config WEXT_SPY
+-	bool
++	bool "WEXT_SPY"
+ 
+ config WEXT_PRIV
+-	bool
++	bool "WEXT_PRIV"
+ 
+ config CFG80211
+ 	tristate "cfg80211 - wireless configuration API"

target/linux/generic/patches-3.1/300-mips_expose_boot_raw.patch

@@ -0,0 +1,39 @@
+From: Mark Miller <mark@mirell.org>
+
+This exposes the CONFIG_BOOT_RAW symbol in Kconfig. This is needed on
+certain Broadcom chipsets running CFE in order to load the kernel.
+
+Signed-off-by: Mark Miller <mark@mirell.org>
+Acked-by: Rob Landley <rob@landley.net>
+---
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -853,9 +853,6 @@ config ARC
+ config ARCH_MAY_HAVE_PC_FDC
+ 	bool
+ 
+-config BOOT_RAW
+-	bool
+-
+ config CEVT_BCM1480
+ 	bool
+ 
+@@ -2303,6 +2300,18 @@ config USE_OF
+ 	help
+ 	  Include support for flattened device tree machine descriptions.
+ 
++config BOOT_RAW
++	bool "Enable the kernel to be executed from the load address"
++	default n
++	help
++	 Allow the kernel to be executed from the load address for
++	 bootloaders which cannot read the ELF format. This places
++	 a jump to start_kernel at the load address.
++
++	 If unsure, say N.
++
++
++
+ endmenu
+ 
+ config LOCKDEP_SUPPORT

target/linux/generic/patches-3.1/301-mips_image_cmdline_hack.patch

@@ -0,0 +1,28 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -952,6 +952,10 @@ config SYNC_R4K
+ config MIPS_MACHINE
+ 	def_bool n
+ 
++config IMAGE_CMDLINE_HACK
++	bool "OpenWrt specific image command line hack"
++	default n
++
+ config NO_IOPORT
+ 	def_bool n
+ 
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -141,6 +141,12 @@ FEXPORT(__kernel_entry)
+ 	j	kernel_entry
+ #endif
+ 
++#ifdef CONFIG_IMAGE_CMDLINE_HACK
++	.ascii	"CMDLINE:"
++EXPORT(__image_cmdline)
++	.fill	0x400
++#endif /* CONFIG_IMAGE_CMDLINE_HACK */
++
+ 	__REF
+ 
+ NESTED(kernel_entry, 16, sp)			# kernel entry point

target/linux/generic/patches-3.1/302-mips_use_generic_thread_info_allocator.patch

@@ -0,0 +1,18 @@
+--- a/arch/mips/include/asm/thread_info.h
++++ b/arch/mips/include/asm/thread_info.h
+@@ -85,6 +85,7 @@ register struct thread_info *__current_t
+ 
+ #define STACK_WARN	(THREAD_SIZE / 8)
+ 
++#if 0
+ #define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+ 
+ #ifdef CONFIG_DEBUG_STACK_USAGE
+@@ -96,6 +97,7 @@ register struct thread_info *__current_t
+ #endif
+ 
+ #define free_thread_info(info) kfree(info)
++#endif
+ 
+ #endif /* !__ASSEMBLY__ */
+ 

target/linux/generic/patches-3.1/303-mips_fix_kexec.patch

@@ -0,0 +1,11 @@
+--- a/arch/mips/kernel/machine_kexec.c
++++ b/arch/mips/kernel/machine_kexec.c
+@@ -52,7 +52,7 @@ machine_kexec(struct kimage *image)
+ 	reboot_code_buffer =
+ 	  (unsigned long)page_address(image->control_code_page);
+ 
+-	kexec_start_address = image->start;
++	kexec_start_address = (unsigned long) phys_to_virt(image->start);
+ 	kexec_indirection_page =
+ 		(unsigned long) phys_to_virt(image->head & PAGE_MASK);
+ 

target/linux/generic/patches-3.1/304-mips_disable_fpu.patch

@@ -0,0 +1,160 @@
+MIPS: allow disabling the kernel FPU emulator
+
+This patch allows turning off the in-kernel Algorithmics
+FPU emulator support, which allows one to save a couple of
+precious blocks on an embedded system.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+--
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -937,6 +937,17 @@ config I8259
+ config MIPS_BONITO64
+ 	bool
+ 
++config MIPS_FPU_EMU
++	bool "Enable FPU emulation"
++	default y
++	help
++	   This option allows building a kernel with or without the Algorithmics
++	   FPU emulator enabled. Turning off this option results in a kernel which
++	   does not catch floating operations exceptions. Make sure that your toolchain
++	   is configured to enable software floating point emulation in that case.
++		
++	   If unsure say Y here.
++
+ config MIPS_MSC
+ 	bool
+ 
+--- a/arch/mips/math-emu/Makefile
++++ b/arch/mips/math-emu/Makefile
+@@ -2,11 +2,13 @@
+ # Makefile for the Linux/MIPS kernel FPU emulation.
+ #
+ 
+-obj-y	:= cp1emu.o ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
++obj-y	:=	kernel_linkage.o dsemul.o cp1emu.o
++
++obj-$(CONFIG_MIPS_FPU_EMU)	+= ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
+ 	   ieee754xcpt.o dp_frexp.o dp_modf.o dp_div.o dp_mul.o dp_sub.o \
+ 	   dp_add.o dp_fsp.o dp_cmp.o dp_logb.o dp_scalb.o dp_simple.o \
+ 	   dp_tint.o dp_fint.o dp_tlong.o dp_flong.o sp_frexp.o sp_modf.o \
+ 	   sp_div.o sp_mul.o sp_sub.o sp_add.o sp_fdp.o sp_cmp.o sp_logb.o \
+ 	   sp_scalb.o sp_simple.o sp_tint.o sp_fint.o sp_tlong.o sp_flong.o \
+-	   dp_sqrt.o sp_sqrt.o kernel_linkage.o dsemul.o
++	   dp_sqrt.o sp_sqrt.o
+ 
+--- a/arch/mips/math-emu/cp1emu.c
++++ b/arch/mips/math-emu/cp1emu.c
+@@ -58,7 +58,11 @@
+ #define __mips 4
+ 
+ /* Function which emulates a floating point instruction. */
++#ifdef CONFIG_DEBUG_FS
++DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
++#endif
+ 
++#ifdef CONFIG_MIPS_FPU_EMU
+ static int fpu_emu(struct pt_regs *, struct mips_fpu_struct *,
+ 	mips_instruction);
+ 
+@@ -69,10 +73,6 @@ static int fpux_emu(struct pt_regs *,
+ 
+ /* Further private data for which no space exists in mips_fpu_struct */
+ 
+-#ifdef CONFIG_DEBUG_FS
+-DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
+-#endif
+-
+ /* Control registers */
+ 
+ #define FPCREG_RID	0	/* $0  = revision id */
+@@ -1360,7 +1360,6 @@ int fpu_emulator_cop1Handler(struct pt_r
+ 
+ 	return sig;
+ }
+-
+ #ifdef CONFIG_DEBUG_FS
+ 
+ static int fpuemu_stat_get(void *data, u64 *val)
+@@ -1409,4 +1408,11 @@ static int __init debugfs_fpuemu(void)
+ 	return 0;
+ }
+ __initcall(debugfs_fpuemu);
+-#endif
++#endif /* CONFIG_DEBUGFS */
++#else
++int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
++        int has_fpu)
++{
++	return 0;
++}
++#endif /* CONFIG_MIPS_FPU_EMU */
+--- a/arch/mips/math-emu/dsemul.c
++++ b/arch/mips/math-emu/dsemul.c
+@@ -109,6 +109,7 @@ int mips_dsemul(struct pt_regs *regs, mi
+ 	return SIGILL;		/* force out of emulation loop */
+ }
+ 
++#ifdef CONFIG_MIPS_FPU_EMU
+ int do_dsemulret(struct pt_regs *xcp)
+ {
+ 	struct emuframe __user *fr;
+@@ -165,3 +166,9 @@ int do_dsemulret(struct pt_regs *xcp)
+ 
+ 	return 1;
+ }
++#else
++int do_dsemulret(struct pt_regs *xcp)
++{
++	return 0;
++}
++#endif /* CONFIG_MIPS_FPU_EMU */
+--- a/arch/mips/math-emu/kernel_linkage.c
++++ b/arch/mips/math-emu/kernel_linkage.c
+@@ -29,6 +29,7 @@
+ 
+ #define SIGNALLING_NAN 0x7ff800007ff80000LL
+ 
++#ifdef CONFIG_MIPS_FPU_EMU
+ void fpu_emulator_init_fpu(void)
+ {
+ 	static int first = 1;
+@@ -112,4 +113,36 @@ int fpu_emulator_restore_context32(struc
+ 
+ 	return err;
+ }
+-#endif
++#endif	/* CONFIG_64BIT */
++#else
++
++void fpu_emulator_init_fpu(void)
++{
++	printk(KERN_INFO "FPU emulator disabled, make sure your toolchain"
++		"was compiled with software floating point support (soft-float)\n");
++	return;
++}
++
++int fpu_emulator_save_context(struct sigcontext __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_restore_context(struct sigcontext __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_save_context32(struct sigcontext32 __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_restore_context32(struct sigcontext32 __user *sc)
++{
++	return 0;
++}
++
++#ifdef CONFIG_64BIT
++#endif	/* CONFIG_64BIT */
++#endif /* CONFIG_MIPS_FPU_EMU */

target/linux/generic/patches-3.1/305-mips_module_reloc.patch

@@ -0,0 +1,371 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -90,8 +90,8 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
+ cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
+ cflags-y			+= -msoft-float
+ LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
+-KBUILD_AFLAGS_MODULE		+= -mlong-calls
+-KBUILD_CFLAGS_MODULE		+= -mlong-calls
++KBUILD_AFLAGS_MODULE		+= -mno-long-calls
++KBUILD_CFLAGS_MODULE		+= -mno-long-calls
+ 
+ cflags-y += -ffreestanding
+ 
+--- a/arch/mips/include/asm/module.h
++++ b/arch/mips/include/asm/module.h
+@@ -9,6 +9,11 @@ struct mod_arch_specific {
+ 	struct list_head dbe_list;
+ 	const struct exception_table_entry *dbe_start;
+ 	const struct exception_table_entry *dbe_end;
++
++	void *phys_plt_tbl;
++	void *virt_plt_tbl;
++	unsigned int phys_plt_offset;
++	unsigned int virt_plt_offset;
+ };
+ 
+ typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity.  */
+--- a/arch/mips/kernel/module.c
++++ b/arch/mips/kernel/module.c
+@@ -45,14 +45,219 @@ static struct mips_hi16 *mips_hi16_list;
+ static LIST_HEAD(dbe_list);
+ static DEFINE_SPINLOCK(dbe_lock);
+ 
+-#ifdef MODULE_START
++/*
++ * Get the potential max trampolines size required of the init and
++ * non-init sections. Only used if we cannot find enough contiguous
++ * physically mapped memory to put the module into.
++ */
++static unsigned int
++get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
++             const char *secstrings, unsigned int symindex, bool is_init)
++{
++	unsigned long ret = 0;
++	unsigned int i, j;
++	Elf_Sym *syms;
++
++	/* Everything marked ALLOC (this includes the exported symbols) */
++	for (i = 1; i < hdr->e_shnum; ++i) {
++		unsigned int info = sechdrs[i].sh_info;
++
++		if (sechdrs[i].sh_type != SHT_REL
++		    && sechdrs[i].sh_type != SHT_RELA)
++			continue;
++
++		/* Not a valid relocation section? */
++		if (info >= hdr->e_shnum)
++			continue;
++
++		/* Don't bother with non-allocated sections */
++		if (!(sechdrs[info].sh_flags & SHF_ALLOC))
++			continue;
++
++		/* If it's called *.init*, and we're not init, we're
++                   not interested */
++		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
++		    != is_init)
++			continue;
++
++		syms = (Elf_Sym *) sechdrs[symindex].sh_addr;
++		if (sechdrs[i].sh_type == SHT_REL) {
++			Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr;
++			unsigned int size = sechdrs[i].sh_size / sizeof(*rel);
++
++			for (j = 0; j < size; ++j) {
++				Elf_Sym *sym;
++
++				if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26)
++					continue;
++
++				sym = syms + ELF_MIPS_R_SYM(rel[j]);
++				if (!is_init && sym->st_shndx != SHN_UNDEF)
++					continue;
++
++				ret += 4 * sizeof(int);
++			}
++		} else {
++			Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr;
++			unsigned int size = sechdrs[i].sh_size / sizeof(*rela);
++
++			for (j = 0; j < size; ++j) {
++				Elf_Sym *sym;
++
++				if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26)
++					continue;
++
++				sym = syms + ELF_MIPS_R_SYM(rela[j]);
++				if (!is_init && sym->st_shndx != SHN_UNDEF)
++					continue;
++
++				ret += 4 * sizeof(int);
++			}
++		}
++	}
++
++	return ret;
++}
++
++#ifndef MODULE_START
++static void *alloc_phys(unsigned long size)
++{
++	unsigned order;
++	struct page *page;
++	struct page *p;
++
++	size = PAGE_ALIGN(size);
++	order = get_order(size);
++
++	page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN |
++			__GFP_THISNODE, order);
++	if (!page)
++		return NULL;
++
++	split_page(page, order);
++
++	for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p)
++		__free_page(p);
++
++	return page_address(page);
++}
++#endif
++
++static void free_phys(void *ptr, unsigned long size)
++{
++	struct page *page;
++	struct page *end;
++
++	page = virt_to_page(ptr);
++	end = page + (PAGE_ALIGN(size) >> PAGE_SHIFT);
++
++	for (; page < end; ++page)
++		__free_page(page);
++}
++
++
+ void *module_alloc(unsigned long size)
+ {
++#ifdef MODULE_START
+ 	return __vmalloc_node_range(size, 1, MODULE_START, MODULE_END,
+ 				GFP_KERNEL, PAGE_KERNEL, -1,
+ 				__builtin_return_address(0));
++#else
++	void *ptr;
++
++	if (size == 0)
++		return NULL;
++
++	ptr = alloc_phys(size);
++
++	/* If we failed to allocate physically contiguous memory,
++	 * fall back to regular vmalloc. The module loader code will
++	 * create jump tables to handle long jumps */
++	if (!ptr)
++		return vmalloc(size);
++
++	return ptr;
++#endif
+ }
++
++static inline bool is_phys_addr(void *ptr)
++{
++#ifdef CONFIG_64BIT
++	return (KSEGX((unsigned long)ptr) == CKSEG0);
++#else
++	return (KSEGX(ptr) == KSEG0);
+ #endif
++}
++
++/* Free memory returned from module_alloc */
++void module_free(struct module *mod, void *module_region)
++{
++	if (is_phys_addr(module_region)) {
++		if (mod->module_init == module_region)
++			free_phys(module_region, mod->init_size);
++		else if (mod->module_core == module_region)
++			free_phys(module_region, mod->core_size);
++		else
++			BUG();
++	} else {
++		vfree(module_region);
++	}
++}
++
++static void *__module_alloc(int size, bool phys)
++{
++	void *ptr;
++
++	if (phys)
++		ptr = kmalloc(size, GFP_KERNEL);
++	else
++		ptr = vmalloc(size);
++	return ptr;
++}
++
++static void __module_free(void *ptr)
++{
++	if (is_phys_addr(ptr))
++		kfree(ptr);
++	else
++		vfree(ptr);
++}
++
++int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
++			      char *secstrings, struct module *mod)
++{
++	unsigned int symindex = 0;
++	unsigned int core_size, init_size;
++	int i;
++
++	for (i = 1; i < hdr->e_shnum; i++)
++		if (sechdrs[i].sh_type == SHT_SYMTAB)
++			symindex = i;
++
++	core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false);
++	init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true);
++
++	mod->arch.phys_plt_offset = 0;
++	mod->arch.virt_plt_offset = 0;
++	mod->arch.phys_plt_tbl = NULL;
++	mod->arch.virt_plt_tbl = NULL;
++
++	if ((core_size + init_size) == 0)
++		return 0;
++
++	mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1);
++	if (!mod->arch.phys_plt_tbl)
++		return -ENOMEM;
++
++	mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0);
++	if (!mod->arch.virt_plt_tbl) {
++		__module_free(mod->arch.phys_plt_tbl);
++		mod->arch.phys_plt_tbl = NULL;
++		return -ENOMEM;
++	}
++
++	return 0;
++}
+ 
+ static int apply_r_mips_none(struct module *me, u32 *location, Elf_Addr v)
+ {
+@@ -73,28 +278,36 @@ static int apply_r_mips_32_rela(struct m
+ 	return 0;
+ }
+ 
+-static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
++static Elf_Addr add_plt_entry_to(unsigned *plt_offset,
++				 void *start, Elf_Addr v)
+ {
+-	if (v % 4) {
+-		pr_err("module %s: dangerous R_MIPS_26 REL relocation\n",
+-		       me->name);
+-		return -ENOEXEC;
+-	}
++	unsigned *tramp = start + *plt_offset;
++	*plt_offset += 4 * sizeof(int);
+ 
+-	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+-		printk(KERN_ERR
+-		       "module %s: relocation overflow\n",
+-		       me->name);
+-		return -ENOEXEC;
+-	}
++	/* adjust carry for addiu */
++	if (v & 0x00008000)
++		v += 0x10000;
+ 
+-	*location = (*location & ~0x03ffffff) |
+-	            ((*location + (v >> 2)) & 0x03ffffff);
++	tramp[0] = 0x3c190000 | (v >> 16);      /* lui t9, hi16 */
++	tramp[1] = 0x27390000 | (v & 0xffff);   /* addiu t9, t9, lo16 */
++	tramp[2] = 0x03200008;                  /* jr t9 */
++	tramp[3] = 0x00000000;                  /* nop */
+ 
+-	return 0;
++	return (Elf_Addr) tramp;
+ }
+ 
+-static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
++static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v)
++{
++	if (is_phys_addr(location))
++		return add_plt_entry_to(&me->arch.phys_plt_offset,
++				me->arch.phys_plt_tbl, v);
++	else
++		return add_plt_entry_to(&me->arch.virt_plt_offset,
++				me->arch.virt_plt_tbl, v);
++
++}
++
++static int set_r_mips_26(struct module *me, u32 *location, u32 ofs, Elf_Addr v)
+ {
+ 	if (v % 4) {
+ 		pr_err("module %s: dangerous R_MIPS_26 RELArelocation\n",
+@@ -103,17 +316,31 @@ static int apply_r_mips_26_rela(struct m
+ 	}
+ 
+ 	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+-		printk(KERN_ERR
++	    v = add_plt_entry(me, location, v + (ofs << 2));
++		if (!v) {
++			printk(KERN_ERR
+ 		       "module %s: relocation overflow\n",
+ 		       me->name);
+-		return -ENOEXEC;
++			return -ENOEXEC;
++		}
++		ofs = 0;
+ 	}
+ 
+-	*location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff);
++	*location = (*location & ~0x03ffffff) | ((ofs + (v >> 2)) & 0x03ffffff);
+ 
+ 	return 0;
+ }
+ 
++static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
++{
++	return set_r_mips_26(me, location, *location & 0x03ffffff, v);
++}
++
++static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
++{
++	return set_r_mips_26(me, location, 0, v);
++}
++
+ static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v)
+ {
+ 	struct mips_hi16 *n;
+@@ -381,11 +608,32 @@ int module_finalize(const Elf_Ehdr *hdr,
+ 		list_add(&me->arch.dbe_list, &dbe_list);
+ 		spin_unlock_irq(&dbe_lock);
+ 	}
++
++	/* Get rid of the fixup trampoline if we're running the module
++	 * from physically mapped address space */
++	if (me->arch.phys_plt_offset == 0) {
++		__module_free(me->arch.phys_plt_tbl);
++		me->arch.phys_plt_tbl = NULL;
++	}
++	if (me->arch.virt_plt_offset == 0) {
++		__module_free(me->arch.virt_plt_tbl);
++		me->arch.virt_plt_tbl = NULL;
++	}
++
+ 	return 0;
+ }
+ 
+ void module_arch_cleanup(struct module *mod)
+ {
++	if (mod->arch.phys_plt_tbl) {
++		__module_free(mod->arch.phys_plt_tbl);
++		mod->arch.phys_plt_tbl = NULL;
++	}
++	if (mod->arch.virt_plt_tbl) {
++		__module_free(mod->arch.virt_plt_tbl);
++		mod->arch.virt_plt_tbl = NULL;
++	}
++
+ 	spin_lock_irq(&dbe_lock);
+ 	list_del(&mod->arch.dbe_list);
+ 	spin_unlock_irq(&dbe_lock);

target/linux/generic/patches-3.1/306-mips_mem_functions_performance.patch

@@ -0,0 +1,83 @@
+--- a/arch/mips/include/asm/string.h
++++ b/arch/mips/include/asm/string.h
+@@ -133,11 +133,44 @@ strncmp(__const__ char *__cs, __const__
+ 
+ #define __HAVE_ARCH_MEMSET
+ extern void *memset(void *__s, int __c, size_t __count);
++#define memset(__s, __c, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memset((__s), (__c), __len);		\
++	else							\
++		__ret = __builtin_memset((__s), (__c), __len);	\
++	__ret;							\
++})
+ 
+ #define __HAVE_ARCH_MEMCPY
+ extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
++#define memcpy(dst, src, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memcpy((dst), (src), __len);		\
++	else							\
++		__ret = __builtin_memcpy((dst), (src), __len);	\
++	__ret;							\
++})
+ 
+ #define __HAVE_ARCH_MEMMOVE
+ extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
++#define memmove(dst, src, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memmove((dst), (src), __len);		\
++	else							\
++		__ret = __builtin_memmove((dst), (src), __len);	\
++	__ret;							\
++})
++
++#define __HAVE_ARCH_MEMCMP
++#define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len))
+ 
+ #endif /* _ASM_STRING_H */
+--- a/arch/mips/lib/Makefile
++++ b/arch/mips/lib/Makefile
+@@ -3,7 +3,7 @@
+ #
+ 
+ lib-y	+= csum_partial.o delay.o memcpy.o memcpy-inatomic.o memset.o \
+-	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o
++	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o memcmp.o
+ 
+ obj-y			+= iomap.o
+ obj-$(CONFIG_PCI)	+= iomap-pci.o
+--- /dev/null
++++ b/arch/mips/lib/memcmp.c
+@@ -0,0 +1,22 @@
++/*
++ *  copied from linux/lib/string.c
++ *
++ *  Copyright (C) 1991, 1992  Linus Torvalds
++ */
++
++#include <linux/module.h>
++#include <linux/string.h>
++
++#undef memcmp
++int memcmp(const void *cs, const void *ct, size_t count)
++{
++	const unsigned char *su1, *su2;
++	int res = 0;
++
++	for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
++		if ((res = *su1 - *su2) != 0)
++			break;
++	return res;
++}
++EXPORT_SYMBOL(memcmp);
++

target/linux/generic/patches-3.1/307-mips_oprofile_fix.patch

@@ -0,0 +1,35 @@
+--- a/arch/mips/oprofile/op_model_mipsxx.c
++++ b/arch/mips/oprofile/op_model_mipsxx.c
+@@ -298,6 +298,11 @@ static void reset_counters(void *arg)
+ 	}
+ }
+ 
++static irqreturn_t mipsxx_perfcount_int(int irq, void *dev_id)
++{
++	return mipsxx_perfcount_handler();
++}
++
+ static int __init mipsxx_init(void)
+ {
+ 	int counters;
+@@ -374,6 +379,10 @@ static int __init mipsxx_init(void)
+ 	save_perf_irq = perf_irq;
+ 	perf_irq = mipsxx_perfcount_handler;
+ 
++	if (cp0_perfcount_irq >= 0)
++		return request_irq(cp0_perfcount_irq, mipsxx_perfcount_int,
++			IRQF_SHARED, "Perfcounter", save_perf_irq);
++
+ 	return 0;
+ }
+ 
+@@ -381,6 +390,9 @@ static void mipsxx_exit(void)
+ {
+ 	int counters = op_model_mipsxx_ops.num_counters;
+ 
++	if (cp0_perfcount_irq >= 0)
++		free_irq(cp0_perfcount_irq, save_perf_irq);
++
+ 	counters = counters_per_cpu_to_total(counters);
+ 	on_each_cpu(reset_counters, (void *)(long)counters, 1);
+ 

target/linux/generic/patches-3.1/310-arm_module_unresolved_weak_sym.patch

@@ -0,0 +1,13 @@
+--- a/arch/arm/kernel/module.c
++++ b/arch/arm/kernel/module.c
+@@ -81,6 +81,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
+ 			return -ENOEXEC;
+ 		}
+ 
++		if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) &&
++		    ELF_ST_BIND(sym->st_info) == STB_WEAK)
++			continue;
++
+ 		loc = dstsec->sh_addr + rel->r_offset;
+ 
+ 		switch (ELF32_R_TYPE(rel->r_info)) {

target/linux/generic/patches-3.1/320-ppc4xx_optimization.patch

@@ -0,0 +1,31 @@
+Upstream doesn't optimize the kernel and bootwrappers for ppc44x because
+they still want to support gcc 3.3 -- well, we don't.
+
+--- a/arch/powerpc/Makefile
++++ b/arch/powerpc/Makefile
+@@ -130,7 +130,8 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y)
+ KBUILD_CFLAGS		+= -mno-sched-epilog
+ endif
+ 
+-cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
++cpu-as-$(CONFIG_40x)		+= -Wa,-m405
++cpu-as-$(CONFIG_44x)		+= -Wa,-m440
+ cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
+ cpu-as-$(CONFIG_POWER4)		+= -Wa,-maltivec
+ cpu-as-$(CONFIG_E500)		+= -Wa,-me500
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -38,10 +38,10 @@ BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(ob
+ DTC_FLAGS	?= -p 1024
+ 
+ $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
++$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440
+ $(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
++$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440
++$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440
+ $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
+ $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
+ $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405

target/linux/generic/patches-3.1/321-powerpc_crtsavres_prereq.patch

@@ -0,0 +1,56 @@
+--- a/Makefile
++++ b/Makefile
+@@ -375,6 +375,7 @@ KBUILD_AFLAGS   := -D__ASSEMBLY__
+ KBUILD_AFLAGS_MODULE  := -DMODULE
+ KBUILD_CFLAGS_MODULE  := -DMODULE
+ KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
++KBUILD_LDFLAGS_MODULE_PREREQ	:= 
+ 
+ # Read KERNELRELEASE from include/config/kernel.release (if it exists)
+ KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
+@@ -384,7 +385,7 @@ export VERSION PATCHLEVEL SUBLEVEL KERNE
+ export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
+ export CPP AR NM STRIP OBJCOPY OBJDUMP
+ export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE
+-export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
++export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE KBUILD_LDFLAGS_MODULE_PREREQ CHECK CHECKFLAGS
+ 
+ export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
+ export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV
+--- a/arch/powerpc/Makefile
++++ b/arch/powerpc/Makefile
+@@ -94,7 +94,7 @@ else
+ endif
+ endif
+ 
+-KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
++KBUILD_LDFLAGS_MODULE_PREREQ += arch/powerpc/lib/crtsavres.o
+ 
+ ifeq ($(CONFIG_TUNE_CELL),y)
+ 	KBUILD_CFLAGS += $(call cc-option,-mtune=cell)
+--- a/scripts/Makefile.modpost
++++ b/scripts/Makefile.modpost
+@@ -110,7 +110,14 @@ quiet_cmd_cc_o_c = CC      $@
+       cmd_cc_o_c = $(CC) $(c_flags) $(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE) \
+ 		   -c -o $@ $<
+ 
+-$(modules:.ko=.mod.o): %.mod.o: %.mod.c FORCE
++quiet_cmd_as_o_S	= AS $(quiet_modtag)  $@
++cmd_as_o_S		= $(CC) $(a_flags) $(AFLAGS_MODULE) -c -o $@ $<
++
++$(KBUILD_LDFLAGS_MODULE_PREREQ): %.o: %.S FORCE
++	$(Q)mkdir -p $(dir $@)
++	$(call if_changed_dep,as_o_S)
++
++$(modules:.ko=.mod.o): %.mod.o: %.mod.c $(KBUILD_LDFLAGS_MODULE_PREREQ) FORCE
+ 	$(call if_changed_dep,cc_o_c)
+ 
+ targets += $(modules:.ko=.mod.o)
+@@ -119,6 +126,7 @@ targets += $(modules:.ko=.mod.o)
+ quiet_cmd_ld_ko_o = LD [M]  $@
+       cmd_ld_ko_o = $(LD) -r $(LDFLAGS)                                 \
+                              $(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE) \
++			     $(KBUILD_LDFLAGS_MODULE_PREREQ)		\
+                              -o $@ $(filter-out FORCE,$^)
+ 
+ $(modules): %.ko :%.o %.mod.o FORCE

target/linux/generic/patches-3.1/400-rootfs_split.patch

@@ -0,0 +1,327 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -33,6 +33,14 @@ config MTD_TESTS
+ 	  should normally be compiled as kernel modules. The modules perform
+ 	  various checks and verifications when loaded.
+ 
++config MTD_ROOTFS_ROOT_DEV
++	bool "Automatically set 'rootfs' partition to be root filesystem"
++	default y
++
++config MTD_ROOTFS_SPLIT
++	bool "Automatically split 'rootfs' partition for squashfs"
++	default y
++
+ config MTD_REDBOOT_PARTS
+ 	tristate "RedBoot partition table parsing"
+ 	---help---
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -29,6 +29,8 @@
+ #include <linux/kmod.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
++#include <linux/root_dev.h>
++#include <linux/magic.h>
+ #include <linux/err.h>
+ 
+ #include "mtdcore.h"
+@@ -50,7 +52,7 @@ struct mtd_part {
+  * the pointer to that structure with this macro.
+  */
+ #define PART(x)  ((struct mtd_part *)(x))
+-
++#define IS_PART(mtd) (mtd->read == part_read)
+ 
+ /*
+  * MTD methods which simply translate the effective address and pass through
+@@ -637,6 +639,155 @@ int mtd_del_partition(struct mtd_info *m
+ }
+ EXPORT_SYMBOL_GPL(mtd_del_partition);
+ 
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++#define ROOTFS_SPLIT_NAME "rootfs_data"
++#define ROOTFS_REMOVED_NAME "<removed>"
++
++struct squashfs_super_block {
++	__le32 s_magic;
++	__le32 pad0[9];
++	__le64 bytes_used;
++};
++
++
++static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
++{
++	struct squashfs_super_block sb;
++	int len, ret;
++
++	ret = master->read(master, offset, sizeof(sb), &len, (void *) &sb);
++	if (ret || (len != sizeof(sb))) {
++		printk(KERN_ALERT "split_squashfs: error occured while reading "
++			"from \"%s\"\n", master->name);
++		return -EINVAL;
++	}
++
++	if (SQUASHFS_MAGIC != le32_to_cpu(sb.s_magic) ) {
++		printk(KERN_ALERT "split_squashfs: no squashfs found in \"%s\"\n",
++			master->name);
++		*split_offset = 0;
++		return 0;
++	}
++
++	if (le64_to_cpu((sb.bytes_used)) <= 0) {
++		printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n",
++			master->name);
++		*split_offset = 0;
++		return 0;
++	}
++
++	len = (u32) le64_to_cpu(sb.bytes_used);
++	len += (offset & 0x000fffff);
++	len +=  (master->erasesize - 1);
++	len &= ~(master->erasesize - 1);
++	len -= (offset & 0x000fffff);
++	*split_offset = offset + len;
++
++	return 0;
++}
++
++static int split_rootfs_data(struct mtd_info *master, struct mtd_info *rpart, const struct mtd_partition *part)
++{
++	struct mtd_partition *dpart;
++	struct mtd_part *slave = NULL;
++	struct mtd_part *spart;
++	int ret, split_offset = 0;
++
++	spart = PART(rpart);
++	ret = split_squashfs(master, spart->offset, &split_offset);
++	if (ret)
++		return ret;
++
++	if (split_offset <= 0)
++		return 0;
++
++	dpart = kmalloc(sizeof(*part)+sizeof(ROOTFS_SPLIT_NAME)+1, GFP_KERNEL);
++	if (dpart == NULL) {
++		printk(KERN_INFO "split_squashfs: no memory for partition \"%s\"\n",
++			ROOTFS_SPLIT_NAME);
++		return -ENOMEM;
++	}
++
++	memcpy(dpart, part, sizeof(*part));
++	dpart->name = (unsigned char *)&dpart[1];
++	strcpy(dpart->name, ROOTFS_SPLIT_NAME);
++
++	dpart->size = rpart->size - (split_offset - spart->offset);
++	dpart->offset = split_offset;
++
++	if (dpart == NULL)
++		return 1;
++
++	printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=%llX, len=%llX \n",
++		ROOTFS_SPLIT_NAME, dpart->offset, dpart->size);
++
++	slave = allocate_partition(master, dpart, 0, split_offset);
++	if (IS_ERR(slave))
++		return PTR_ERR(slave);
++	mutex_lock(&mtd_partitions_mutex);
++	list_add(&slave->list, &mtd_partitions);
++	mutex_unlock(&mtd_partitions_mutex);
++
++	add_mtd_device(&slave->mtd);
++
++	rpart->split = &slave->mtd;
++
++	return 0;
++}
++
++static int refresh_rootfs_split(struct mtd_info *mtd)
++{
++	struct mtd_partition tpart;
++	struct mtd_part *part;
++	char *name;
++	//int index = 0;
++	int offset, size;
++	int ret;
++
++	part = PART(mtd);
++
++	/* check for the new squashfs offset first */
++	ret = split_squashfs(part->master, part->offset, &offset);
++	if (ret)
++		return ret;
++
++	if ((offset > 0) && !mtd->split) {
++		printk(KERN_INFO "%s: creating new split partition for \"%s\"\n", __func__, mtd->name);
++		/* if we don't have a rootfs split partition, create a new one */
++		tpart.name = (char *) mtd->name;
++		tpart.size = mtd->size;
++		tpart.offset = part->offset;
++
++		return split_rootfs_data(part->master, &part->mtd, &tpart);
++	} else if ((offset > 0) && mtd->split) {
++		/* update the offsets of the existing partition */
++		size = mtd->size + part->offset - offset;
++
++		part = PART(mtd->split);
++		part->offset = offset;
++		part->mtd.size = size;
++		printk(KERN_INFO "%s: %s partition \"" ROOTFS_SPLIT_NAME "\", offset: 0x%06x (0x%06x)\n",
++			__func__, (!strcmp(part->mtd.name, ROOTFS_SPLIT_NAME) ? "updating" : "creating"),
++			(u32) part->offset, (u32) part->mtd.size);
++		name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
++		strcpy(name, ROOTFS_SPLIT_NAME);
++		part->mtd.name = name;
++	} else if ((offset <= 0) && mtd->split) {
++		printk(KERN_INFO "%s: removing partition \"%s\"\n", __func__, mtd->split->name);
++
++		/* mark existing partition as removed */
++		part = PART(mtd->split);
++		name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
++		strcpy(name, ROOTFS_REMOVED_NAME);
++		part->mtd.name = name;
++		part->offset = 0;
++		part->mtd.size = 0;
++	}
++
++	return 0;
++}
++#endif /* CONFIG_MTD_ROOTFS_SPLIT */
++
+ /*
+  * This function, given a master MTD object and a partition table, creates
+  * and registers slave MTD objects which are bound to the master according to
+@@ -653,6 +804,9 @@ int add_mtd_partitions(struct mtd_info *
+ 	struct mtd_part *slave;
+ 	uint64_t cur_offset = 0;
+ 	int i;
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++	int ret;
++#endif
+ 
+ 	printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
+ 
+@@ -667,12 +821,53 @@ int add_mtd_partitions(struct mtd_info *
+ 
+ 		add_mtd_device(&slave->mtd);
+ 
++		if (!strcmp(parts[i].name, "rootfs")) {
++#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
++			if (ROOT_DEV == 0) {
++				printk(KERN_NOTICE "mtd: partition \"rootfs\" "
++					"set to be root filesystem\n");
++				ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, slave->mtd.index);
++			}
++#endif
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++			ret = split_rootfs_data(master, &slave->mtd, &parts[i]);
++			/* if (ret == 0)
++			 * 	j++; */
++#endif
++		}
++
+ 		cur_offset = slave->offset + slave->mtd.size;
+ 	}
+ 
+ 	return 0;
+ }
+ 
++int mtd_device_refresh(struct mtd_info *mtd)
++{
++	int ret = 0;
++
++	if (IS_PART(mtd)) {
++		struct mtd_part *part;
++		struct mtd_info *master;
++
++		part = PART(mtd);
++		master = part->master;
++		if (master->refresh_device)
++			ret = master->refresh_device(master);
++	}
++
++	if (!ret && mtd->refresh_device)
++		ret = mtd->refresh_device(mtd);
++
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++	if (!ret && IS_PART(mtd) && !strcmp(mtd->name, "rootfs"))
++		refresh_rootfs_split(mtd);
++#endif
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(mtd_device_refresh);
++
+ static DEFINE_SPINLOCK(part_parser_lock);
+ static LIST_HEAD(part_parsers);
+ 
+--- a/drivers/mtd/mtdchar.c
++++ b/drivers/mtd/mtdchar.c
+@@ -948,6 +948,12 @@ static int mtd_ioctl(struct file *file,
+ 		break;
+ 	}
+ 
++	case MTDREFRESH:
++	{
++		ret = mtd_device_refresh(mtd);
++		break;
++	}
++
+ 	default:
+ 		ret = -ENOTTY;
+ 	}
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -125,6 +125,7 @@ struct nand_ecclayout {
+ 	struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE];
+ };
+ 
++struct mtd_info;
+ struct mtd_info {
+ 	u_char type;
+ 	uint32_t flags;
+@@ -277,6 +278,9 @@ struct mtd_info {
+ 	struct device dev;
+ 	int usecount;
+ 
++	int (*refresh_device)(struct mtd_info *mtd);
++	struct mtd_info *split;
++
+ 	/* If the driver is something smart, like UBI, it may need to maintain
+ 	 * its own reference counting. The below functions are only for driver.
+ 	 * The driver may register its callbacks. These callbacks are not
+@@ -327,6 +331,7 @@ struct mtd_partition;
+ extern int mtd_device_register(struct mtd_info *master,
+ 			       const struct mtd_partition *parts,
+ 			       int nr_parts);
++extern int mtd_device_refresh(struct mtd_info *master);
+ extern int mtd_device_unregister(struct mtd_info *master);
+ extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
+ extern int __get_mtd_device(struct mtd_info *mtd);
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -34,12 +34,14 @@
+  * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
+  */
+ 
++struct mtd_partition;
+ struct mtd_partition {
+ 	char *name;			/* identifier string */
+ 	uint64_t size;			/* partition size */
+ 	uint64_t offset;		/* offset within the master MTD space */
+ 	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
+ 	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only) */
++	int (*refresh_partition)(struct mtd_info *);
+ };
+ 
+ #define MTDPART_OFS_NXTBLK	(-2)
+--- a/include/mtd/mtd-abi.h
++++ b/include/mtd/mtd-abi.h
+@@ -127,6 +127,7 @@ struct otp_info {
+ #define MEMWRITEOOB64		_IOWR('M', 21, struct mtd_oob_buf64)
+ #define MEMREADOOB64		_IOWR('M', 22, struct mtd_oob_buf64)
+ #define MEMISLOCKED		_IOR('M', 23, struct erase_info_user)
++#define MTDREFRESH		_IO('M', 24)
+ 
+ /*
+  * Obsolete legacy interface. Keep it in order not to break userspace

target/linux/generic/patches-3.1/401-partial_eraseblock_write.patch

@@ -0,0 +1,145 @@
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -35,6 +35,8 @@
+ 
+ #include "mtdcore.h"
+ 
++#define MTD_ERASE_PARTIAL	0x8000 /* partition only covers parts of an erase block */
++
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+ static DEFINE_MUTEX(mtd_partitions_mutex);
+@@ -258,13 +260,60 @@ static int part_erase(struct mtd_info *m
+ 		return -EROFS;
+ 	if (instr->addr >= mtd->size)
+ 		return -EINVAL;
++
++	instr->partial_start = false;
++	if (mtd->flags & MTD_ERASE_PARTIAL) {
++		size_t readlen = 0;
++		u64 mtd_ofs;
++
++		instr->erase_buf = kmalloc(part->master->erasesize, GFP_ATOMIC);
++		if (!instr->erase_buf)
++			return -ENOMEM;
++
++		mtd_ofs = part->offset + instr->addr;
++		instr->erase_buf_ofs = do_div(mtd_ofs, part->master->erasesize);
++
++		if (instr->erase_buf_ofs > 0) {
++			instr->addr -= instr->erase_buf_ofs;
++			ret = part->master->read(part->master,
++				instr->addr + part->offset,
++				part->master->erasesize,
++				&readlen, instr->erase_buf);
++
++			instr->partial_start = true;
++		} else {
++			mtd_ofs = part->offset + part->mtd.size;
++			instr->erase_buf_ofs = part->master->erasesize -
++				do_div(mtd_ofs, part->master->erasesize);
++
++			if (instr->erase_buf_ofs > 0) {
++				instr->len += instr->erase_buf_ofs;
++				ret = part->master->read(part->master,
++					part->offset + instr->addr +
++					instr->len - part->master->erasesize,
++					part->master->erasesize, &readlen,
++					instr->erase_buf);
++			} else {
++				ret = 0;
++			}
++		}
++		if (ret < 0) {
++			kfree(instr->erase_buf);
++			return ret;
++		}
++
++	}
++
+ 	instr->addr += part->offset;
+ 	ret = part->master->erase(part->master, instr);
+ 	if (ret) {
+ 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
+ 			instr->fail_addr -= part->offset;
+ 		instr->addr -= part->offset;
++		if (mtd->flags & MTD_ERASE_PARTIAL)
++			kfree(instr->erase_buf);
+ 	}
++
+ 	return ret;
+ }
+ 
+@@ -272,7 +321,25 @@ void mtd_erase_callback(struct erase_inf
+ {
+ 	if (instr->mtd->erase == part_erase) {
+ 		struct mtd_part *part = PART(instr->mtd);
++		size_t wrlen = 0;
+ 
++		if (instr->mtd->flags & MTD_ERASE_PARTIAL) {
++			if (instr->partial_start) {
++				part->master->write(part->master,
++					instr->addr, instr->erase_buf_ofs,
++					&wrlen, instr->erase_buf);
++				instr->addr += instr->erase_buf_ofs;
++			} else {
++				instr->len -= instr->erase_buf_ofs;
++				part->master->write(part->master,
++					instr->addr + instr->len,
++					instr->erase_buf_ofs, &wrlen,
++					instr->erase_buf +
++					part->master->erasesize -
++					instr->erase_buf_ofs);
++			}
++			kfree(instr->erase_buf);
++		}
+ 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
+ 			instr->fail_addr -= part->offset;
+ 		instr->addr -= part->offset;
+@@ -530,18 +597,24 @@ static struct mtd_part *allocate_partiti
+ 	if ((slave->mtd.flags & MTD_WRITEABLE) &&
+ 	    mtd_mod_by_eb(slave->offset, &slave->mtd)) {
+ 		/* Doesn't start on a boundary of major erase size */
+-		/* FIXME: Let it be writable if it is on a boundary of
+-		 * _minor_ erase size though */
+-		slave->mtd.flags &= ~MTD_WRITEABLE;
+-		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+-			part->name);
++		slave->mtd.flags |= MTD_ERASE_PARTIAL;
++		if (((u32) slave->mtd.size) > master->erasesize)
++			slave->mtd.flags &= ~MTD_WRITEABLE;
++		else
++			slave->mtd.erasesize = slave->mtd.size;
+ 	}
+ 	if ((slave->mtd.flags & MTD_WRITEABLE) &&
+-	    mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) {
+-		slave->mtd.flags &= ~MTD_WRITEABLE;
+-		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+-			part->name);
++	    mtd_mod_by_eb(slave->offset + slave->mtd.size, &slave->mtd)) {
++		slave->mtd.flags |= MTD_ERASE_PARTIAL;
++
++		if ((u32) slave->mtd.size > master->erasesize)
++			slave->mtd.flags &= ~MTD_WRITEABLE;
++		else
++			slave->mtd.erasesize = slave->mtd.size;
+ 	}
++	if ((slave->mtd.flags & (MTD_ERASE_PARTIAL|MTD_WRITEABLE)) == MTD_ERASE_PARTIAL)
++		printk(KERN_WARNING"mtd: partition \"%s\" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only\n",
++				part->name);
+ 
+ 	slave->mtd.ecclayout = master->ecclayout;
+ 	if (master->block_isbad) {
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -57,6 +57,10 @@ struct erase_info {
+ 	u_long priv;
+ 	u_char state;
+ 	struct erase_info *next;
++
++	u8 *erase_buf;
++	u32 erase_buf_ofs;
++	bool partial_start;
+ };
+ 
+ struct mtd_erase_region_info {

target/linux/generic/patches-3.1/410-mtd_info_move_forward_decl.patch

@@ -0,0 +1,18 @@
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -33,6 +33,7 @@
+  * Note: writeable partitions require their size and offset be
+  * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
+  */
++struct mtd_info;
+ 
+ struct mtd_partition;
+ struct mtd_partition {
+@@ -49,7 +50,6 @@ struct mtd_partition {
+ #define MTDPART_SIZ_FULL	(0)
+ 
+ 
+-struct mtd_info;
+ 
+ /*
+  * Functions dealing with the various ways of partitioning the space

target/linux/generic/patches-3.1/420-redboot_space.patch

@@ -0,0 +1,30 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -267,14 +267,21 @@ static int parse_redboot_partitions(stru
+ #endif
+ 		names += strlen(names)+1;
+ 
+-#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ 		if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
+-			i++;
+-			parts[i].offset = parts[i-1].size + parts[i-1].offset;
+-			parts[i].size = fl->next->img->flash_base - parts[i].offset;
+-			parts[i].name = nullname;
+-		}
++			if (!strcmp(parts[i].name, "rootfs")) {
++				parts[i].size = fl->next->img->flash_base;
++				parts[i].size &= ~(master->erasesize - 1);
++				parts[i].size -= parts[i].offset;
++#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
++				nrparts--;
++			} else {
++				i++;
++				parts[i].offset = parts[i-1].size + parts[i-1].offset;
++				parts[i].size = fl->next->img->flash_base - parts[i].offset;
++				parts[i].name = nullname;
+ #endif
++			}
++		}
+ 		tmp_fl = fl;
+ 		fl = fl->next;
+ 		kfree(tmp_fl);

target/linux/generic/patches-3.1/421-redboot_boardconfig.patch

@@ -0,0 +1,60 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -29,6 +29,8 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ 
++#define BOARD_CONFIG_PART		"boardconfig"
++
+ struct fis_image_desc {
+     unsigned char name[16];      // Null terminated name
+     uint32_t	  flash_base;    // Address within FLASH of image
+@@ -59,6 +61,7 @@ static int parse_redboot_partitions(stru
+                              struct mtd_partition **pparts,
+                              unsigned long fis_origin)
+ {
++	unsigned long max_offset = 0;
+ 	int nrparts = 0;
+ 	struct fis_image_desc *buf;
+ 	struct mtd_partition *parts;
+@@ -227,14 +230,14 @@ static int parse_redboot_partitions(stru
+ 		}
+ 	}
+ #endif
+-	parts = kzalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL);
++	parts = kzalloc(sizeof(*parts) * (nrparts + 1) + nulllen + namelen + sizeof(BOARD_CONFIG_PART), GFP_KERNEL);
+ 
+ 	if (!parts) {
+ 		ret = -ENOMEM;
+ 		goto out;
+ 	}
+ 
+-	nullname = (char *)&parts[nrparts];
++	nullname = (char *)&parts[nrparts + 1];
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ 	if (nulllen > 0) {
+ 		strcpy(nullname, nullstring);
+@@ -253,6 +256,8 @@ static int parse_redboot_partitions(stru
+ 	}
+ #endif
+ 	for ( ; i<nrparts; i++) {
++		if(max_offset < buf[i].flash_base + buf[i].size)
++			max_offset = buf[i].flash_base + buf[i].size;
+ 		parts[i].size = fl->img->size;
+ 		parts[i].offset = fl->img->flash_base;
+ 		parts[i].name = names;
+@@ -286,6 +291,14 @@ static int parse_redboot_partitions(stru
+ 		fl = fl->next;
+ 		kfree(tmp_fl);
+ 	}
++	if(master->size - max_offset >= master->erasesize)
++	{
++		parts[nrparts].size = master->size - max_offset;
++		parts[nrparts].offset = max_offset;
++		parts[nrparts].name = names;
++		strcpy(names, BOARD_CONFIG_PART);
++		nrparts++;
++	}
+ 	ret = nrparts;
+ 	*pparts = parts;
+  out:

target/linux/generic/patches-3.1/430-mtd_myloader_partition_parser.patch

@@ -0,0 +1,35 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -157,6 +157,22 @@ config MTD_AR7_PARTS
+ 	---help---
+ 	  TI AR7 partitioning support
+ 
++config MTD_MYLOADER_PARTS
++	tristate "MyLoader partition parsing"
++	depends on ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX
++	---help---
++	  MyLoader is a bootloader which allows the user to define partitions
++	  in flash devices, by putting a table in the second erase block
++	  on the device, similar to a partition table. This table gives the 
++	  offsets and lengths of the user defined partitions.
++
++	  If you need code which can detect and parse these tables, and
++	  register MTD 'partitions' corresponding to each image detected,
++	  enable this option.
++
++	  You will still need the parsing functions to be called by the driver
++	  for your particular device. It won't happen automatically.
++
+ comment "User Modules And Translation Layers"
+ 
+ config MTD_CHAR
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
+ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
+ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
++obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ 
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o

target/linux/generic/patches-3.1/440-block2mtd_init.patch

@@ -0,0 +1,116 @@
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -14,6 +14,7 @@
+ #include <linux/list.h>
+ #include <linux/init.h>
+ #include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
+ #include <linux/buffer_head.h>
+ #include <linux/mutex.h>
+ #include <linux/mount.h>
+@@ -232,11 +233,12 @@ static void block2mtd_free_device(struct
+ 
+ 
+ /* FIXME: ensure that mtd->size % erase_size == 0 */
+-static struct block2mtd_dev *add_device(char *devname, int erase_size)
++static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
+ {
+ 	const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
+ 	struct block_device *bdev;
+ 	struct block2mtd_dev *dev;
++	struct mtd_partition *part;
+ 	char *name;
+ 
+ 	if (!devname)
+@@ -275,13 +277,16 @@ static struct block2mtd_dev *add_device(
+ 
+ 	/* Setup the MTD structure */
+ 	/* make the name contain the block device in */
+-	name = kasprintf(GFP_KERNEL, "block2mtd: %s", devname);
++	if (!mtdname)
++		mtdname = devname;
++	name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL);
+ 	if (!name)
+ 		goto devinit_err;
+ 
++	strcpy(name, mtdname);
+ 	dev->mtd.name = name;
+ 
+-	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
++	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1);
+ 	dev->mtd.erasesize = erase_size;
+ 	dev->mtd.writesize = 1;
+ 	dev->mtd.type = MTD_RAM;
+@@ -294,14 +299,17 @@ static struct block2mtd_dev *add_device(
+ 	dev->mtd.priv = dev;
+ 	dev->mtd.owner = THIS_MODULE;
+ 
+-	if (mtd_device_register(&dev->mtd, NULL, 0)) {
++	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
++	part->name = name;
++	part->offset = 0;
++	part->size = dev->mtd.size;
++	if (mtd_device_register(&dev->mtd, part, 1)) {
+ 		/* Device didn't get added, so free the entry */
+ 		goto devinit_err;
+ 	}
+ 	list_add(&dev->list, &blkmtd_device_list);
+ 	INFO("mtd%d: [%s] erase_size = %dKiB [%d]", dev->mtd.index,
+-			dev->mtd.name + strlen("block2mtd: "),
+-			dev->mtd.erasesize >> 10, dev->mtd.erasesize);
++			mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize);
+ 	return dev;
+ 
+ devinit_err:
+@@ -374,9 +382,9 @@ static char block2mtd_paramline[80 + 12]
+ 
+ static int block2mtd_setup2(const char *val)
+ {
+-	char buf[80 + 12]; /* 80 for device, 12 for erase size */
++	char buf[80 + 12 + 80]; /* 80 for device, 12 for erase size, 80 for name */
+ 	char *str = buf;
+-	char *token[2];
++	char *token[3];
+ 	char *name;
+ 	size_t erase_size = PAGE_SIZE;
+ 	int i, ret;
+@@ -387,7 +395,7 @@ static int block2mtd_setup2(const char *
+ 	strcpy(str, val);
+ 	kill_final_newline(str);
+ 
+-	for (i = 0; i < 2; i++)
++	for (i = 0; i < 3; i++)
+ 		token[i] = strsep(&str, ",");
+ 
+ 	if (str)
+@@ -406,8 +414,10 @@ static int block2mtd_setup2(const char *
+ 			parse_err("illegal erase size");
+ 		}
+ 	}
++	if (token[2] && (strlen(token[2]) + 1 > 80))
++		parse_err("mtd device name too long");
+ 
+-	add_device(name, erase_size);
++	add_device(name, erase_size, token[2]);
+ 
+ 	return 0;
+ }
+@@ -441,7 +451,7 @@ static int block2mtd_setup(const char *v
+ 
+ 
+ module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
+-MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
++MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
+ 
+ static int __init block2mtd_init(void)
+ {
+--- a/fs/partitions/check.c
++++ b/fs/partitions/check.c
+@@ -664,6 +664,7 @@ rescan:
+ 	kfree(state);
+ 	return 0;
+ }
++EXPORT_SYMBOL(rescan_partitions);
+ 
+ unsigned char *read_dev_sector(struct block_device *bdev, sector_t n, Sector *p)
+ {

target/linux/generic/patches-3.1/441-block2mtd_refresh.patch

@@ -0,0 +1,291 @@
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -30,6 +30,8 @@ struct block2mtd_dev {
+ 	struct block_device *blkdev;
+ 	struct mtd_info mtd;
+ 	struct mutex write_mutex;
++	rwlock_t bdev_mutex;
++	char devname[0];
+ };
+ 
+ 
+@@ -82,6 +84,12 @@ static int block2mtd_erase(struct mtd_in
+ 	size_t len = instr->len;
+ 	int err;
+ 
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev) {
++		err = -EINVAL;
++		goto done;
++	}
++
+ 	instr->state = MTD_ERASING;
+ 	mutex_lock(&dev->write_mutex);
+ 	err = _block2mtd_erase(dev, from, len);
+@@ -93,6 +101,10 @@ static int block2mtd_erase(struct mtd_in
+ 		instr->state = MTD_ERASE_DONE;
+ 
+ 	mtd_erase_callback(instr);
++
++done:
++	read_unlock(&dev->bdev_mutex);
++
+ 	return err;
+ }
+ 
+@@ -104,10 +116,14 @@ static int block2mtd_read(struct mtd_inf
+ 	struct page *page;
+ 	int index = from >> PAGE_SHIFT;
+ 	int offset = from & (PAGE_SIZE-1);
+-	int cpylen;
++	int cpylen, err = 0;
++
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev || (from > mtd->size)) {
++		err = -EINVAL;
++		goto done;
++	}
+ 
+-	if (from > mtd->size)
+-		return -EINVAL;
+ 	if (from + len > mtd->size)
+ 		len = mtd->size - from;
+ 
+@@ -122,10 +138,14 @@ static int block2mtd_read(struct mtd_inf
+ 		len = len - cpylen;
+ 
+ 		page = page_read(dev->blkdev->bd_inode->i_mapping, index);
+-		if (!page)
+-			return -ENOMEM;
+-		if (IS_ERR(page))
+-			return PTR_ERR(page);
++		if (!page) {
++			err = -ENOMEM;
++			goto done;
++		}
++		if (IS_ERR(page)) {
++			err = PTR_ERR(page);
++			goto done;
++		}
+ 
+ 		memcpy(buf, page_address(page) + offset, cpylen);
+ 		page_cache_release(page);
+@@ -136,7 +156,10 @@ static int block2mtd_read(struct mtd_inf
+ 		offset = 0;
+ 		index++;
+ 	}
+-	return 0;
++
++done:
++	read_unlock(&dev->bdev_mutex);
++	return err;
+ }
+ 
+ 
+@@ -188,12 +211,22 @@ static int block2mtd_write(struct mtd_in
+ 		size_t *retlen, const u_char *buf)
+ {
+ 	struct block2mtd_dev *dev = mtd->priv;
+-	int err;
++	int err = 0;
++
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev) {
++		err = -EINVAL;
++		goto done;
++	}
+ 
+ 	if (!len)
+-		return 0;
+-	if (to >= mtd->size)
+-		return -ENOSPC;
++		goto done;
++
++	if (to >= mtd->size) {
++		err = -ENOSPC;
++		goto done;
++	}
++
+ 	if (to + len > mtd->size)
+ 		len = mtd->size - to;
+ 
+@@ -202,6 +235,9 @@ static int block2mtd_write(struct mtd_in
+ 	mutex_unlock(&dev->write_mutex);
+ 	if (err > 0)
+ 		err = 0;
++
++done:
++	read_unlock(&dev->bdev_mutex);
+ 	return err;
+ }
+ 
+@@ -210,33 +246,110 @@ static int block2mtd_write(struct mtd_in
+ static void block2mtd_sync(struct mtd_info *mtd)
+ {
+ 	struct block2mtd_dev *dev = mtd->priv;
++	read_lock(&dev->bdev_mutex);
++	if (dev->blkdev)
+ 	sync_blockdev(dev->blkdev);
++	read_unlock(&dev->bdev_mutex);
++
+ 	return;
+ }
+ 
+ 
++static int _open_bdev(struct block2mtd_dev *dev)
++{
++	const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
++	struct block_device *bdev;
++
++	/* Get a handle on the device */
++	bdev = blkdev_get_by_path(dev->devname, mode, dev);
++#ifndef MODULE
++	if (IS_ERR(bdev)) {
++		dev_t devt;
++
++		/* We might not have rootfs mounted at this point. Try
++		   to resolve the device name by other means. */
++
++		devt = name_to_dev_t(dev->devname);
++		if (devt)
++			bdev = blkdev_get_by_dev(devt, mode, dev);
++	}
++#endif
++
++	if (IS_ERR(bdev)) {
++		ERROR("error: cannot open device %s", dev->devname);
++		return 1;
++	}
++	dev->blkdev = bdev;
++
++	if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
++		ERROR("attempting to use an MTD device as a block device");
++		return 1;
++	}
++
++	return 0;
++}
++
++static void _close_bdev(struct block2mtd_dev *dev)
++{
++	struct block_device *bdev;
++
++	if (!dev->blkdev)
++		return;
++
++	bdev = dev->blkdev;
++	invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping, 0, -1);
++	blkdev_put(dev->blkdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL);
++	dev->blkdev = NULL;
++}
++
+ static void block2mtd_free_device(struct block2mtd_dev *dev)
+ {
+ 	if (!dev)
+ 		return;
+ 
+ 	kfree(dev->mtd.name);
+-
+-	if (dev->blkdev) {
+-		invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping,
+-					0, -1);
+-		blkdev_put(dev->blkdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL);
+-	}
+-
++	_close_bdev(dev);
+ 	kfree(dev);
+ }
+ 
+ 
+-/* FIXME: ensure that mtd->size % erase_size == 0 */
+-static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
++static int block2mtd_refresh(struct mtd_info *mtd)
+ {
+-	const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
++	struct block2mtd_dev *dev = mtd->priv;
+ 	struct block_device *bdev;
++	dev_t devt;
++	int err = 0;
++
++	/* no other mtd function can run at this point */
++	write_lock(&dev->bdev_mutex);
++
++	/* get the device number for the whole disk */
++	devt = MKDEV(MAJOR(dev->blkdev->bd_dev), 0);
++
++	/* close the old block device */
++	_close_bdev(dev);
++
++	/* open the whole disk, issue a partition rescan, then */
++	bdev = blkdev_get_by_dev(devt, FMODE_WRITE | FMODE_READ, mtd);
++	if (!bdev || !bdev->bd_disk)
++		err = -EINVAL;
++#ifndef CONFIG_MTD_BLOCK2MTD_MODULE
++	else
++		err = rescan_partitions(bdev->bd_disk, bdev);
++#endif
++	if (bdev)
++		blkdev_put(bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL);
++
++	/* try to open the partition block device again */
++	_open_bdev(dev);
++	write_unlock(&dev->bdev_mutex);
++
++	return err;
++}
++
++/* FIXME: ensure that mtd->size % erase_size == 0 */
++static struct block2mtd_dev *add_device(char *devname, int erase_size, char *mtdname)
++{
+ 	struct block2mtd_dev *dev;
+ 	struct mtd_partition *part;
+ 	char *name;
+@@ -244,36 +357,17 @@ static struct block2mtd_dev *add_device(
+ 	if (!devname)
+ 		return NULL;
+ 
+-	dev = kzalloc(sizeof(struct block2mtd_dev), GFP_KERNEL);
++	dev = kzalloc(sizeof(struct block2mtd_dev) + strlen(devname) + 1, GFP_KERNEL);
+ 	if (!dev)
+ 		return NULL;
+ 
+-	/* Get a handle on the device */
+-	bdev = blkdev_get_by_path(devname, mode, dev);
+-#ifndef MODULE
+-	if (IS_ERR(bdev)) {
+-
+-		/* We might not have rootfs mounted at this point. Try
+-		   to resolve the device name by other means. */
++	strcpy(dev->devname, devname);
+ 
+-		dev_t devt = name_to_dev_t(devname);
+-		if (devt)
+-			bdev = blkdev_get_by_dev(devt, mode, dev);
+-	}
+-#endif
+-
+-	if (IS_ERR(bdev)) {
+-		ERROR("error: cannot open device %s", devname);
++	if (_open_bdev(dev))
+ 		goto devinit_err;
+-	}
+-	dev->blkdev = bdev;
+-
+-	if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
+-		ERROR("attempting to use an MTD device as a block device");
+-		goto devinit_err;
+-	}
+ 
+ 	mutex_init(&dev->write_mutex);
++	rwlock_init(&dev->bdev_mutex);
+ 
+ 	/* Setup the MTD structure */
+ 	/* make the name contain the block device in */
+@@ -298,6 +392,7 @@ static struct block2mtd_dev *add_device(
+ 	dev->mtd.read = block2mtd_read;
+ 	dev->mtd.priv = dev;
+ 	dev->mtd.owner = THIS_MODULE;
++	dev->mtd.refresh_device = block2mtd_refresh;
+ 
+ 	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
+ 	part->name = name;

target/linux/generic/patches-3.1/442-block2mtd_probe.patch

@@ -0,0 +1,10 @@
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -269,6 +269,7 @@ static int _open_bdev(struct block2mtd_d
+ 		/* We might not have rootfs mounted at this point. Try
+ 		   to resolve the device name by other means. */
+ 
++		wait_for_device_probe();
+ 		devt = name_to_dev_t(dev->devname);
+ 		if (devt)
+ 			bdev = blkdev_get_by_dev(devt, mode, dev);

target/linux/generic/patches-3.1/450-mtd_plat_nand_chip_fixup.patch

@@ -0,0 +1,37 @@
+---
+ drivers/mtd/nand/plat_nand.c |   13 ++++++++++++-
+ include/linux/mtd/nand.h     |    1 +
+ 2 files changed, 13 insertions(+), 1 deletion(-)
+
+--- a/include/linux/mtd/nand.h
++++ b/include/linux/mtd/nand.h
+@@ -625,6 +625,7 @@ struct platform_nand_chip {
+ 	int chip_delay;
+ 	unsigned int options;
+ 	const char **part_probe_types;
++	int (*chip_fixup)(struct mtd_info *mtd);
+ 	void (*set_parts)(uint64_t size, struct platform_nand_chip *chip);
+ 	void *priv;
+ };
+--- a/drivers/mtd/nand/plat_nand.c
++++ b/drivers/mtd/nand/plat_nand.c
+@@ -94,7 +94,18 @@ static int __devinit plat_nand_probe(str
+ 	}
+ 
+ 	/* Scan to find existence of the device */
+-	if (nand_scan(&data->mtd, pdata->chip.nr_chips)) {
++	if (nand_scan_ident(&data->mtd, pdata->chip.nr_chips, NULL)) {
++		res = -ENXIO;
++		goto out;
++	}
++
++	if (pdata->chip.chip_fixup) {
++		res = pdata->chip.chip_fixup(&data->mtd);
++		if (res)
++			goto out;
++	}
++
++	if (nand_scan_tail(&data->mtd)) {
+ 		err = -ENXIO;
+ 		goto out;
+ 	}

target/linux/generic/patches-3.1/451-mtd_fix_nand_correct_data_return_code.patch

@@ -0,0 +1,12 @@
+--- a/drivers/mtd/nand/nand_ecc.c
++++ b/drivers/mtd/nand/nand_ecc.c
+@@ -507,8 +507,7 @@ int __nand_correct_data(unsigned char *b
+ 	if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
+ 		return 1;	/* error in ecc data; no action needed */
+ 
+-	printk(KERN_ERR "uncorrectable error : ");
+-	return -1;
++	return -EBADMSG;
+ }
+ EXPORT_SYMBOL(__nand_correct_data);
+ 

target/linux/generic/patches-3.1/470-mtd_m25p80_add_pm25lv_flash_support.patch

@@ -0,0 +1,39 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -44,6 +44,7 @@
+ #define	OPCODE_BE_4K		0x20	/* Erase 4KiB block */
+ #define	OPCODE_BE_32K		0x52	/* Erase 32KiB block */
+ #define	OPCODE_CHIP_ERASE	0xc7	/* Erase whole flash chip */
++#define	OPCODE_BE_4K_PMC	0xd7	/* Erase 4KiB block on PMC chips*/
+ #define	OPCODE_SE		0xd8	/* Sector erase (usually 64KiB) */
+ #define	OPCODE_RDID		0x9f	/* Read JEDEC ID */
+ 
+@@ -630,6 +631,7 @@ struct flash_info {
+ 	u16		flags;
+ #define	SECT_4K		0x01		/* OPCODE_BE_4K works uniformly */
+ #define	M25P_NO_ERASE	0x02		/* No erase command needed */
++#define	SECT_4K_PMC	0x04		/* OPCODE_BE_4K_PMC works uniformly */
+ };
+ 
+ #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
+@@ -689,6 +691,10 @@ static const struct spi_device_id m25p_i
+ 	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
+ 	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
+ 
++	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
++	{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
++	{ "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) },
++
+ 	/* Spansion -- single (large) sector size only, at least
+ 	 * for the chips listed here (without boot sectors).
+ 	 */
+@@ -920,6 +926,9 @@ static int __devinit m25p_probe(struct s
+ 	if (info->flags & SECT_4K) {
+ 		flash->erase_opcode = OPCODE_BE_4K;
+ 		flash->mtd.erasesize = 4096;
++	} else if (info->flags & SECT_4K_PMC) {
++		flash->erase_opcode = OPCODE_BE_4K_PMC;
++		flash->mtd.erasesize = 4096;
+ 	} else {
+ 		flash->erase_opcode = OPCODE_SE;
+ 		flash->mtd.erasesize = info->sector_size;

target/linux/generic/patches-3.1/473-mtd_m25p80_add_w25q128.patch

@@ -0,0 +1,10 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -768,6 +768,7 @@ static const struct spi_device_id m25p_i
+ 	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
+ 	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
+ 	{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
++	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
+ 
+ 	/* Catalyst / On Semiconductor -- non-JEDEC */
+ 	{ "cat25c11", CAT25_INFO(  16, 8, 16, 1) },

target/linux/generic/patches-3.1/474-mtd_concat_sync_fix.patch

@@ -0,0 +1,12 @@
+--- a/drivers/mtd/mtdconcat.c
++++ b/drivers/mtd/mtdconcat.c
+@@ -619,7 +619,8 @@ static void concat_sync(struct mtd_info
+ 
+ 	for (i = 0; i < concat->num_subdev; i++) {
+ 		struct mtd_info *subdev = concat->subdev[i];
+-		subdev->sync(subdev);
++		if (subdev->sync)
++			subdev->sync(subdev);
+ 	}
+ }
+ 

target/linux/generic/patches-3.1/475-mtd_cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch

@@ -0,0 +1,18 @@
+From: George Kashperko <george@znau.edu.ua>
+
+Issue map read after Write Buffer Load command to ensure chip is ready
+to receive data.
+Signed-off-by: George Kashperko <george@znau.edu.ua>
+---
+ drivers/mtd/chips/cfi_cmdset_0002.c |    1 +
+ 1 file changed, 1 insertion(+)
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1412,6 +1412,7 @@ static int __xipram do_write_buffer(stru
+ 
+ 	/* Write Buffer Load */
+ 	map_write(map, CMD(0x25), cmd_adr);
++	(void) map_read(map, cmd_adr);
+ 
+ 	chip->state = FL_WRITING_TO_BUFFER;
+ 

target/linux/generic/patches-3.1/500-yaffs_support.patch

@@ -0,0 +1,18 @@
+--- a/fs/Kconfig
++++ b/fs/Kconfig
+@@ -35,6 +35,7 @@ source "fs/gfs2/Kconfig"
+ source "fs/ocfs2/Kconfig"
+ source "fs/btrfs/Kconfig"
+ source "fs/nilfs2/Kconfig"
++source "fs/yaffs2/Kconfig"
+ 
+ endif # BLOCK
+ 
+--- a/fs/Makefile
++++ b/fs/Makefile
+@@ -124,3 +124,5 @@ obj-$(CONFIG_GFS2_FS)           += gfs2/
+ obj-$(CONFIG_EXOFS_FS)          += exofs/
+ obj-$(CONFIG_CEPH_FS)		+= ceph/
+ obj-$(CONFIG_PSTORE)		+= pstore/
++obj-$(CONFIG_YAFFS_FS)		+= yaffs2/
++

target/linux/generic/patches-3.1/503-yaffs_symlink_bug.patch

@@ -0,0 +1,17 @@
+--- a/fs/yaffs2/yaffs_guts.c
++++ b/fs/yaffs2/yaffs_guts.c
+@@ -1709,11 +1709,11 @@ static int yaffs_change_obj_name(yaffs_o
+ 	}
+ 
+ 	/* TODO: Do we need this different handling for YAFFS2 and YAFFS1?? */
+-	if (obj->my_dev->param.is_yaffs2)
++	// if (obj->my_dev->param.is_yaffs2) 
+ 		unlinkOp = (new_dir == obj->my_dev->unlinked_dir);
+-	else
++	/* else
+ 		unlinkOp = (new_dir == obj->my_dev->unlinked_dir
+-			    && obj->variant_type == YAFFS_OBJECT_TYPE_FILE);
++			    && obj->variant_type == YAFFS_OBJECT_TYPE_FILE); */
+ 
+ 	deleteOp = (new_dir == obj->my_dev->del_dir);
+ 

target/linux/generic/patches-3.1/504-yaffs_mutex_fix.patch

@@ -0,0 +1,20 @@
+--- a/fs/yaffs2/yaffs_vfs_glue.c
++++ b/fs/yaffs2/yaffs_vfs_glue.c
+@@ -3036,7 +3036,7 @@ static struct super_block *yaffs_interna
+         YINIT_LIST_HEAD(&(yaffs_dev_to_lc(dev)->searchContexts));
+         param->remove_obj_fn = yaffs_remove_obj_callback;
+ 
+-	init_MUTEX(&(yaffs_dev_to_lc(dev)->grossLock));
++	sema_init(&(yaffs_dev_to_lc(dev)->grossLock), 1);
+ 
+ 	yaffs_gross_lock(dev);
+ 
+@@ -3494,7 +3494,7 @@ static int __init init_yaffs_fs(void)
+ 
+ 
+ 
+-	init_MUTEX(&yaffs_context_lock);
++	sema_init((&yaffs_context_lock), 1);
+ 
+ 	/* Install the proc_fs entries */
+ 	my_proc_entry = create_proc_entry("yaffs",

target/linux/generic/patches-3.1/505-2.6.39_fix.patch

@@ -0,0 +1,147 @@
+--- a/fs/yaffs2/yaffs_vfs_glue.c
++++ b/fs/yaffs2/yaffs_vfs_glue.c
+@@ -72,7 +72,7 @@
+ #include <linux/init.h>
+ #include <linux/fs.h>
+ #include <linux/proc_fs.h>
+-#include <linux/smp_lock.h>
++#include <linux/mutex.h>
+ #include <linux/pagemap.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/interrupt.h>
+@@ -97,6 +97,8 @@
+ 
+ #include <asm/div64.h>
+ 
++static DEFINE_MUTEX(yaffs_mutex);
++
+ #if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 
+ #include <linux/statfs.h>
+@@ -1538,7 +1540,7 @@ static loff_t yaffs_dir_llseek(struct fi
+ {
+ 	long long retval;
+ 
+-	lock_kernel();
++	mutex_lock(&yaffs_mutex);
+ 
+ 	switch (origin){
+ 	case 2:
+@@ -1555,7 +1557,7 @@ static loff_t yaffs_dir_llseek(struct fi
+ 
+ 		retval = offset;
+ 	}
+-	unlock_kernel();
++	mutex_unlock(&yaffs_mutex);
+ 	return retval;
+ }
+ 
+@@ -3087,98 +3089,52 @@ static struct super_block *yaffs_interna
+ 	return sb;
+ }
+ 
+-
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_internal_read_super_mtd(struct super_block *sb, void *data,
+ 					 int silent)
+ {
+ 	return yaffs_internal_read_super(1, sb, data, silent) ? 0 : -EINVAL;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+-static int yaffs_read_super(struct file_system_type *fs,
++static struct dentry *yaffs_read_super(struct file_system_type *fs,
+ 			    int flags, const char *dev_name,
+-			    void *data, struct vfsmount *mnt)
+-{
+-
+-	return get_sb_bdev(fs, flags, dev_name, data,
+-			   yaffs_internal_read_super_mtd, mnt);
+-}
+-#else
+-static struct super_block *yaffs_read_super(struct file_system_type *fs,
+-					    int flags, const char *dev_name,
+-					    void *data)
++			    void *data)
+ {
+ 
+-	return get_sb_bdev(fs, flags, dev_name, data,
++	return mount_bdev(fs, flags, dev_name, data,
+ 			   yaffs_internal_read_super_mtd);
+ }
+-#endif
+ 
+ static struct file_system_type yaffs_fs_type = {
+ 	.owner = THIS_MODULE,
+ 	.name = "yaffs",
+-	.get_sb = yaffs_read_super,
++	.mount = yaffs_read_super,
+ 	.kill_sb = kill_block_super,
+ 	.fs_flags = FS_REQUIRES_DEV,
+ };
+-#else
+-static struct super_block *yaffs_read_super(struct super_block *sb, void *data,
+-					    int silent)
+-{
+-	return yaffs_internal_read_super(1, sb, data, silent);
+-}
+-
+-static DECLARE_FSTYPE(yaffs_fs_type, "yaffs", yaffs_read_super,
+-		      FS_REQUIRES_DEV);
+-#endif
+-
+ 
+ #ifdef CONFIG_YAFFS_YAFFS2
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs2_internal_read_super_mtd(struct super_block *sb, void *data,
+ 					  int silent)
+ {
+ 	return yaffs_internal_read_super(2, sb, data, silent) ? 0 : -EINVAL;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+-static int yaffs2_read_super(struct file_system_type *fs,
+-			int flags, const char *dev_name, void *data,
+-			struct vfsmount *mnt)
++static struct dentry *yaffs2_read_super(struct file_system_type *fs,
++			int flags, const char *dev_name,
++			void *data)
+ {
+-	return get_sb_bdev(fs, flags, dev_name, data,
+-			yaffs2_internal_read_super_mtd, mnt);
++	return mount_bdev(fs, flags, dev_name, data,
++		yaffs_internal_read_super_mtd);
+ }
+-#else
+-static struct super_block *yaffs2_read_super(struct file_system_type *fs,
+-					     int flags, const char *dev_name,
+-					     void *data)
+-{
+-
+-	return get_sb_bdev(fs, flags, dev_name, data,
+-			   yaffs2_internal_read_super_mtd);
+-}
+-#endif
+ 
+ static struct file_system_type yaffs2_fs_type = {
+ 	.owner = THIS_MODULE,
+ 	.name = "yaffs2",
+-	.get_sb = yaffs2_read_super,
++	.mount = yaffs2_read_super,
+ 	.kill_sb = kill_block_super,
+ 	.fs_flags = FS_REQUIRES_DEV,
+ };
+-#else
+-static struct super_block *yaffs2_read_super(struct super_block *sb,
+-					     void *data, int silent)
+-{
+-	return yaffs_internal_read_super(2, sb, data, silent);
+-}
+-
+-static DECLARE_FSTYPE(yaffs2_fs_type, "yaffs2", yaffs2_read_super,
+-		      FS_REQUIRES_DEV);
+-#endif
+ 
+ #endif				/* CONFIG_YAFFS_YAFFS2 */
+ 

target/linux/generic/patches-3.1/511-debloat_lzma.patch

@@ -0,0 +1,485 @@
+--- a/include/linux/lzma/LzmaDec.h
++++ b/include/linux/lzma/LzmaDec.h
+@@ -31,14 +31,6 @@ typedef struct _CLzmaProps
+   UInt32 dicSize;
+ } CLzmaProps;
+ 
+-/* LzmaProps_Decode - decodes properties
+-Returns:
+-  SZ_OK
+-  SZ_ERROR_UNSUPPORTED - Unsupported properties
+-*/
+-
+-SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
+-
+ 
+ /* ---------- LZMA Decoder state ---------- */
+ 
+@@ -70,8 +62,6 @@ typedef struct
+ 
+ #define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
+ 
+-void LzmaDec_Init(CLzmaDec *p);
+-
+ /* There are two types of LZMA streams:
+      0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
+      1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
+@@ -108,97 +98,6 @@ typedef enum
+ 
+ /* ELzmaStatus is used only as output value for function call */
+ 
+-
+-/* ---------- Interfaces ---------- */
+-
+-/* There are 3 levels of interfaces:
+-     1) Dictionary Interface
+-     2) Buffer Interface
+-     3) One Call Interface
+-   You can select any of these interfaces, but don't mix functions from different
+-   groups for same object. */
+-
+-
+-/* There are two variants to allocate state for Dictionary Interface:
+-     1) LzmaDec_Allocate / LzmaDec_Free
+-     2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
+-   You can use variant 2, if you set dictionary buffer manually.
+-   For Buffer Interface you must always use variant 1.
+-
+-LzmaDec_Allocate* can return:
+-  SZ_OK
+-  SZ_ERROR_MEM         - Memory allocation error
+-  SZ_ERROR_UNSUPPORTED - Unsupported properties
+-*/
+-   
+-SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
+-void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
+-
+-SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
+-void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
+-
+-/* ---------- Dictionary Interface ---------- */
+-
+-/* You can use it, if you want to eliminate the overhead for data copying from
+-   dictionary to some other external buffer.
+-   You must work with CLzmaDec variables directly in this interface.
+-
+-   STEPS:
+-     LzmaDec_Constr()
+-     LzmaDec_Allocate()
+-     for (each new stream)
+-     {
+-       LzmaDec_Init()
+-       while (it needs more decompression)
+-       {
+-         LzmaDec_DecodeToDic()
+-         use data from CLzmaDec::dic and update CLzmaDec::dicPos
+-       }
+-     }
+-     LzmaDec_Free()
+-*/
+-
+-/* LzmaDec_DecodeToDic
+-   
+-   The decoding to internal dictionary buffer (CLzmaDec::dic).
+-   You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
+-
+-finishMode:
+-  It has meaning only if the decoding reaches output limit (dicLimit).
+-  LZMA_FINISH_ANY - Decode just dicLimit bytes.
+-  LZMA_FINISH_END - Stream must be finished after dicLimit.
+-
+-Returns:
+-  SZ_OK
+-    status:
+-      LZMA_STATUS_FINISHED_WITH_MARK
+-      LZMA_STATUS_NOT_FINISHED
+-      LZMA_STATUS_NEEDS_MORE_INPUT
+-      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
+-  SZ_ERROR_DATA - Data error
+-*/
+-
+-SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
+-    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
+-
+-
+-/* ---------- Buffer Interface ---------- */
+-
+-/* It's zlib-like interface.
+-   See LzmaDec_DecodeToDic description for information about STEPS and return results,
+-   but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
+-   to work with CLzmaDec variables manually.
+-
+-finishMode:
+-  It has meaning only if the decoding reaches output limit (*destLen).
+-  LZMA_FINISH_ANY - Decode just destLen bytes.
+-  LZMA_FINISH_END - Stream must be finished after (*destLen).
+-*/
+-
+-SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
+-    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
+-
+-
+ /* ---------- One Call Interface ---------- */
+ 
+ /* LzmaDecode
+--- a/lib/lzma/LzmaDec.c
++++ b/lib/lzma/LzmaDec.c
+@@ -682,7 +682,7 @@ static void LzmaDec_InitRc(CLzmaDec *p,
+   p->needFlush = 0;
+ }
+ 
+-void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
++static void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
+ {
+   p->needFlush = 1;
+   p->remainLen = 0;
+@@ -698,7 +698,7 @@ void LzmaDec_InitDicAndState(CLzmaDec *p
+     p->needInitState = 1;
+ }
+ 
+-void LzmaDec_Init(CLzmaDec *p)
++static void LzmaDec_Init(CLzmaDec *p)
+ {
+   p->dicPos = 0;
+   LzmaDec_InitDicAndState(p, True, True);
+@@ -716,7 +716,7 @@ static void LzmaDec_InitStateReal(CLzmaD
+   p->needInitState = 0;
+ }
+ 
+-SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
++static SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
+     ELzmaFinishMode finishMode, ELzmaStatus *status)
+ {
+   SizeT inSize = *srcLen;
+@@ -837,7 +837,7 @@ SRes LzmaDec_DecodeToDic(CLzmaDec *p, Si
+   return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
+ }
+ 
+-SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
++static __maybe_unused SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
+ {
+   SizeT outSize = *destLen;
+   SizeT inSize = *srcLen;
+@@ -877,7 +877,7 @@ SRes LzmaDec_DecodeToBuf(CLzmaDec *p, By
+   }
+ }
+ 
+-void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
++static void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
+ {
+   alloc->Free(alloc, p->probs);
+   p->probs = 0;
+@@ -889,13 +889,13 @@ static void LzmaDec_FreeDict(CLzmaDec *p
+   p->dic = 0;
+ }
+ 
+-void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
++static void __maybe_unused LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
+ {
+   LzmaDec_FreeProbs(p, alloc);
+   LzmaDec_FreeDict(p, alloc);
+ }
+ 
+-SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
++static SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
+ {
+   UInt32 dicSize;
+   Byte d;
+@@ -935,7 +935,7 @@ static SRes LzmaDec_AllocateProbs2(CLzma
+   return SZ_OK;
+ }
+ 
+-SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
++static SRes __maybe_unused LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
+ {
+   CLzmaProps propNew;
+   RINOK(LzmaProps_Decode(&propNew, props, propsSize));
+@@ -944,7 +944,7 @@ SRes LzmaDec_AllocateProbs(CLzmaDec *p,
+   return SZ_OK;
+ }
+ 
+-SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
++static SRes __maybe_unused LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
+ {
+   CLzmaProps propNew;
+   SizeT dicBufSize;
+--- a/include/linux/lzma/LzmaEnc.h
++++ b/include/linux/lzma/LzmaEnc.h
+@@ -31,9 +31,6 @@ typedef struct _CLzmaEncProps
+ } CLzmaEncProps;
+ 
+ void LzmaEncProps_Init(CLzmaEncProps *p);
+-void LzmaEncProps_Normalize(CLzmaEncProps *p);
+-UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
+-
+ 
+ /* ---------- CLzmaEncHandle Interface ---------- */
+ 
+@@ -53,26 +50,9 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc *
+ void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
+ SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
+ SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
+-SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
+-    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
+ SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
+     int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
+ 
+-/* ---------- One Call Interface ---------- */
+-
+-/* LzmaEncode
+-Return code:
+-  SZ_OK               - OK
+-  SZ_ERROR_MEM        - Memory allocation error
+-  SZ_ERROR_PARAM      - Incorrect paramater
+-  SZ_ERROR_OUTPUT_EOF - output buffer overflow
+-  SZ_ERROR_THREAD     - errors in multithreading functions (only for Mt version)
+-*/
+-
+-SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
+-    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
+-    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
+-
+ #ifdef __cplusplus
+ }
+ #endif
+--- a/lib/lzma/LzmaEnc.c
++++ b/lib/lzma/LzmaEnc.c
+@@ -53,7 +53,7 @@ void LzmaEncProps_Init(CLzmaEncProps *p)
+   p->writeEndMark = 0;
+ }
+ 
+-void LzmaEncProps_Normalize(CLzmaEncProps *p)
++static void LzmaEncProps_Normalize(CLzmaEncProps *p)
+ {
+   int level = p->level;
+   if (level < 0) level = 5;
+@@ -76,7 +76,7 @@ void LzmaEncProps_Normalize(CLzmaEncProp
+       #endif
+ }
+ 
+-UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
++static UInt32 __maybe_unused LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
+ {
+   CLzmaEncProps props = *props2;
+   LzmaEncProps_Normalize(&props);
+@@ -93,7 +93,7 @@ UInt32 LzmaEncProps_GetDictSize(const CL
+ 
+ #define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
+ 
+-UInt32 GetPosSlot1(UInt32 pos)
++static UInt32 GetPosSlot1(UInt32 pos)
+ {
+   UInt32 res;
+   BSR2_RET(pos, res);
+@@ -107,7 +107,7 @@ UInt32 GetPosSlot1(UInt32 pos)
+ #define kNumLogBits (9 + (int)sizeof(size_t) / 2)
+ #define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
+ 
+-void LzmaEnc_FastPosInit(Byte *g_FastPos)
++static void LzmaEnc_FastPosInit(Byte *g_FastPos)
+ {
+   int c = 2, slotFast;
+   g_FastPos[0] = 0;
+@@ -339,7 +339,7 @@ typedef struct
+   CSaveState saveState;
+ } CLzmaEnc;
+ 
+-void LzmaEnc_SaveState(CLzmaEncHandle pp)
++static void __maybe_unused LzmaEnc_SaveState(CLzmaEncHandle pp)
+ {
+   CLzmaEnc *p = (CLzmaEnc *)pp;
+   CSaveState *dest = &p->saveState;
+@@ -365,7 +365,7 @@ void LzmaEnc_SaveState(CLzmaEncHandle pp
+   memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
+ }
+ 
+-void LzmaEnc_RestoreState(CLzmaEncHandle pp)
++static void __maybe_unused LzmaEnc_RestoreState(CLzmaEncHandle pp)
+ {
+   CLzmaEnc *dest = (CLzmaEnc *)pp;
+   const CSaveState *p = &dest->saveState;
+@@ -600,7 +600,7 @@ static void LitEnc_EncodeMatched(CRangeE
+   while (symbol < 0x10000);
+ }
+ 
+-void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
++static void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
+ {
+   UInt32 i;
+   for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
+@@ -1676,7 +1676,7 @@ static void FillDistancesPrices(CLzmaEnc
+   p->matchPriceCount = 0;
+ }
+ 
+-void LzmaEnc_Construct(CLzmaEnc *p)
++static void LzmaEnc_Construct(CLzmaEnc *p)
+ {
+   RangeEnc_Construct(&p->rc);
+   MatchFinder_Construct(&p->matchFinderBase);
+@@ -1709,7 +1709,7 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc *
+   return p;
+ }
+ 
+-void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
++static void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
+ {
+   alloc->Free(alloc, p->litProbs);
+   alloc->Free(alloc, p->saveState.litProbs);
+@@ -2074,7 +2074,7 @@ SRes LzmaEnc_MemPrepare(CLzmaEncHandle p
+   return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
+ }
+ 
+-void LzmaEnc_Finish(CLzmaEncHandle pp)
++static void LzmaEnc_Finish(CLzmaEncHandle pp)
+ {
+   #ifndef _7ZIP_ST
+   CLzmaEnc *p = (CLzmaEnc *)pp;
+@@ -2108,7 +2108,7 @@ static size_t MyWrite(void *pp, const vo
+ }
+ 
+ 
+-UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
++static UInt32 __maybe_unused LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
+ {
+   const CLzmaEnc *p = (CLzmaEnc *)pp;
+   return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
+@@ -2120,7 +2120,7 @@ const Byte *LzmaEnc_GetCurBuf(CLzmaEncHa
+   return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
+ }
+ 
+-SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
++static SRes __maybe_unused LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
+     Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
+ {
+   CLzmaEnc *p = (CLzmaEnc *)pp;
+@@ -2248,7 +2248,7 @@ SRes LzmaEnc_MemEncode(CLzmaEncHandle pp
+   return res;
+ }
+ 
+-SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++static __maybe_unused SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
+     const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
+     ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
+ {
+--- a/include/linux/lzma/LzFind.h
++++ b/include/linux/lzma/LzFind.h
+@@ -55,11 +55,6 @@ typedef struct _CMatchFinder
+ 
+ #define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
+ 
+-int MatchFinder_NeedMove(CMatchFinder *p);
+-Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
+-void MatchFinder_MoveBlock(CMatchFinder *p);
+-void MatchFinder_ReadIfRequired(CMatchFinder *p);
+-
+ void MatchFinder_Construct(CMatchFinder *p);
+ 
+ /* Conditions:
+@@ -70,12 +65,6 @@ int MatchFinder_Create(CMatchFinder *p,
+     UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
+     ISzAlloc *alloc);
+ void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
+-void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
+-void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
+-
+-UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
+-    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
+-    UInt32 *distances, UInt32 maxLen);
+ 
+ /*
+ Conditions:
+@@ -102,12 +91,6 @@ typedef struct _IMatchFinder
+ 
+ void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
+ 
+-void MatchFinder_Init(CMatchFinder *p);
+-UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
+-UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
+-void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
+-void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
+-
+ #ifdef __cplusplus
+ }
+ #endif
+--- a/lib/lzma/LzFind.c
++++ b/lib/lzma/LzFind.c
+@@ -42,12 +42,12 @@ static int LzInWindow_Create(CMatchFinde
+   return (p->bufferBase != 0);
+ }
+ 
+-Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
+-Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
++static Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
++static Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
+ 
+-UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
++static UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
+ 
+-void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
++static void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
+ {
+   p->posLimit -= subValue;
+   p->pos -= subValue;
+@@ -268,7 +268,7 @@ static void MatchFinder_SetLimits(CMatch
+   p->posLimit = p->pos + limit;
+ }
+ 
+-void MatchFinder_Init(CMatchFinder *p)
++static void MatchFinder_Init(CMatchFinder *p)
+ {
+   UInt32 i;
+   for (i = 0; i < p->hashSizeSum; i++)
+@@ -287,7 +287,7 @@ static UInt32 MatchFinder_GetSubValue(CM
+   return (p->pos - p->historySize - 1) & kNormalizeMask;
+ }
+ 
+-void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
++static void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
+ {
+   UInt32 i;
+   for (i = 0; i < numItems; i++)
+@@ -350,7 +350,7 @@ static UInt32 * Hc_GetMatchesSpec(UInt32
+   }
+ }
+ 
+-UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++static UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
+     UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
+     UInt32 *distances, UInt32 maxLen)
+ {
+@@ -492,7 +492,7 @@ static UInt32 Bt2_MatchFinder_GetMatches
+   GET_MATCHES_FOOTER(offset, 1)
+ }
+ 
+-UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++static __maybe_unused UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
+ {
+   UInt32 offset;
+   GET_MATCHES_HEADER(3)
+@@ -632,7 +632,7 @@ static UInt32 Hc4_MatchFinder_GetMatches
+   MOVE_POS_RET
+ }
+ 
+-UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++static __maybe_unused UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
+ {
+   UInt32 offset;
+   GET_MATCHES_HEADER(3)
+@@ -657,7 +657,7 @@ static void Bt2_MatchFinder_Skip(CMatchF
+   while (--num != 0);
+ }
+ 
+-void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++static __maybe_unused void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
+ {
+   do
+   {
+@@ -718,7 +718,7 @@ static void Hc4_MatchFinder_Skip(CMatchF
+   while (--num != 0);
+ }
+ 
+-void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++static __maybe_unused void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
+ {
+   do
+   {

target/linux/generic/patches-3.1/512-jffs2_eofdetect.patch

@@ -0,0 +1,132 @@
+--- a/fs/jffs2/build.c
++++ b/fs/jffs2/build.c
+@@ -112,6 +112,17 @@ static int jffs2_build_filesystem(struct
+ 	dbg_fsbuild("scanned flash completely\n");
+ 	jffs2_dbg_dump_block_lists_nolock(c);
+ 
++	if (c->flags & (1 << 7)) {
++		printk("%s(): unlocking the mtd device... ", __func__);
++		if (c->mtd->unlock)
++			c->mtd->unlock(c->mtd, 0, c->mtd->size);
++		printk("done.\n");
++
++		printk("%s(): erasing all blocks after the end marker... ", __func__);
++		jffs2_erase_pending_blocks(c, -1);
++		printk("done.\n");
++	}
++
+ 	dbg_fsbuild("pass 1 starting\n");
+ 	c->flags |= JFFS2_SB_FLAG_BUILDING;
+ 	/* Now scan the directory tree, increasing nlink according to every dirent found. */
+--- a/fs/jffs2/scan.c
++++ b/fs/jffs2/scan.c
+@@ -72,7 +72,7 @@ static int file_dirty(struct jffs2_sb_in
+ 		return ret;
+ 	if ((ret = jffs2_scan_dirty_space(c, jeb, jeb->free_size)))
+ 		return ret;
+-	/* Turned wasted size into dirty, since we apparently 
++	/* Turned wasted size into dirty, since we apparently
+ 	   think it's recoverable now. */
+ 	jeb->dirty_size += jeb->wasted_size;
+ 	c->dirty_size += jeb->wasted_size;
+@@ -147,8 +147,11 @@ int jffs2_scan_medium(struct jffs2_sb_in
+ 		/* reset summary info for next eraseblock scan */
+ 		jffs2_sum_reset_collected(s);
+ 
+-		ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
+-						buf_size, s);
++		if (c->flags & (1 << 7))
++			ret = BLK_STATE_ALLFF;
++		else
++			ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
++							buf_size, s);
+ 
+ 		if (ret < 0)
+ 			goto out;
+@@ -405,7 +408,7 @@ static int jffs2_scan_xref_node(struct j
+ 	if (!ref)
+ 		return -ENOMEM;
+ 
+-	/* BEFORE jffs2_build_xattr_subsystem() called, 
++	/* BEFORE jffs2_build_xattr_subsystem() called,
+ 	 * and AFTER xattr_ref is marked as a dead xref,
+ 	 * ref->xid is used to store 32bit xid, xd is not used
+ 	 * ref->ino is used to store 32bit inode-number, ic is not used
+@@ -478,7 +481,7 @@ static int jffs2_scan_eraseblock (struct
+ 		struct jffs2_sum_marker *sm;
+ 		void *sumptr = NULL;
+ 		uint32_t sumlen;
+-	      
++
+ 		if (!buf_size) {
+ 			/* XIP case. Just look, point at the summary if it's there */
+ 			sm = (void *)buf + c->sector_size - sizeof(*sm);
+@@ -494,9 +497,9 @@ static int jffs2_scan_eraseblock (struct
+ 				buf_len = sizeof(*sm);
+ 
+ 			/* Read as much as we want into the _end_ of the preallocated buffer */
+-			err = jffs2_fill_scan_buf(c, buf + buf_size - buf_len, 
++			err = jffs2_fill_scan_buf(c, buf + buf_size - buf_len,
+ 						  jeb->offset + c->sector_size - buf_len,
+-						  buf_len);				
++						  buf_len);
+ 			if (err)
+ 				return err;
+ 
+@@ -515,9 +518,9 @@ static int jffs2_scan_eraseblock (struct
+ 				}
+ 				if (buf_len < sumlen) {
+ 					/* Need to read more so that the entire summary node is present */
+-					err = jffs2_fill_scan_buf(c, sumptr, 
++					err = jffs2_fill_scan_buf(c, sumptr,
+ 								  jeb->offset + c->sector_size - sumlen,
+-								  sumlen - buf_len);				
++								  sumlen - buf_len);
+ 					if (err)
+ 						return err;
+ 				}
+@@ -530,7 +533,7 @@ static int jffs2_scan_eraseblock (struct
+ 
+ 			if (buf_size && sumlen > buf_size)
+ 				kfree(sumptr);
+-			/* If it returns with a real error, bail. 
++			/* If it returns with a real error, bail.
+ 			   If it returns positive, that's a block classification
+ 			   (i.e. BLK_STATE_xxx) so return that too.
+ 			   If it returns zero, fall through to full scan. */
+@@ -551,6 +554,17 @@ static int jffs2_scan_eraseblock (struct
+ 			return err;
+ 	}
+ 
++	if ((buf[0] == 0xde) &&
++		(buf[1] == 0xad) &&
++		(buf[2] == 0xc0) &&
++		(buf[3] == 0xde)) {
++		/* end of filesystem. erase everything after this point */
++		printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset);
++		c->flags |= (1 << 7);
++
++		return BLK_STATE_ALLFF;
++	}
++
+ 	/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
+ 	ofs = 0;
+ 	max_ofs = EMPTY_SCAN_SIZE(c->sector_size);
+@@ -676,7 +690,7 @@ scan_more:
+ 				scan_end = buf_len;
+ 				goto more_empty;
+ 			}
+-			
++
+ 			/* See how much more there is to read in this eraseblock... */
+ 			buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs);
+ 			if (!buf_len) {
+@@ -912,7 +926,7 @@ scan_more:
+ 
+ 	D1(printk(KERN_DEBUG "Block at 0x%08x: free 0x%08x, dirty 0x%08x, unchecked 0x%08x, used 0x%08x, wasted 0x%08x\n",
+ 		  jeb->offset,jeb->free_size, jeb->dirty_size, jeb->unchecked_size, jeb->used_size, jeb->wasted_size));
+-	
++
+ 	/* mark_node_obsolete can add to wasted !! */
+ 	if (jeb->wasted_size) {
+ 		jeb->dirty_size += jeb->wasted_size;

target/linux/generic/patches-3.1/520-squashfs_update_xz_comp_opts.patch

@@ -0,0 +1,25 @@
+From f31b7c0efa255dd17a5f584022a319387f09b0d8 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 12 Apr 2011 19:55:41 +0200
+Subject: [PATCH] squashfs: update xz compressor options struct.
+
+Update the xz compressor options struct to match the squashfs userspace
+one.
+---
+ fs/squashfs/xz_wrapper.c |    4 +++-
+ 1 files changed, 3 insertions(+), 1 deletions(-)
+
+--- a/fs/squashfs/xz_wrapper.c
++++ b/fs/squashfs/xz_wrapper.c
+@@ -39,8 +39,10 @@ struct squashfs_xz {
+ };
+ 
+ struct comp_opts {
+-	__le32 dictionary_size;
+ 	__le32 flags;
++	__le16 bit_opts;
++	__le16 fb;
++	__le32 dictionary_size;
+ };
+ 
+ static void *squashfs_xz_init(struct squashfs_sb_info *msblk, void *buff,

target/linux/generic/patches-3.1/601-netfilter_layer7_pktmatch.patch

@@ -0,0 +1,108 @@
+--- a/include/linux/netfilter/xt_layer7.h
++++ b/include/linux/netfilter/xt_layer7.h
+@@ -8,6 +8,7 @@ struct xt_layer7_info {
+     char protocol[MAX_PROTOCOL_LEN];
+     char pattern[MAX_PATTERN_LEN];
+     u_int8_t invert;
++    u_int8_t pkt;
+ };
+ 
+ #endif /* _XT_LAYER7_H */
+--- a/net/netfilter/xt_layer7.c
++++ b/net/netfilter/xt_layer7.c
+@@ -314,33 +314,35 @@ static int match_no_append(struct nf_con
+ }
+ 
+ /* add the new app data to the conntrack.  Return number of bytes added. */
+-static int add_data(struct nf_conn * master_conntrack,
+-                    char * app_data, int appdatalen)
++static int add_datastr(char *target, int offset, char *app_data, int len)
+ {
+ 	int length = 0, i;
+-	int oldlength = master_conntrack->layer7.app_data_len;
+-
+-	/* This is a fix for a race condition by Deti Fliegl. However, I'm not 
+-	   clear on whether the race condition exists or whether this really 
+-	   fixes it.  I might just be being dense... Anyway, if it's not really 
+-	   a fix, all it does is waste a very small amount of time. */
+-	if(!master_conntrack->layer7.app_data) return 0;
++	if (!target) return 0;
+ 
+ 	/* Strip nulls. Make everything lower case (our regex lib doesn't
+ 	do case insensitivity).  Add it to the end of the current data. */
+-	for(i = 0; i < maxdatalen-oldlength-1 &&
+-		   i < appdatalen; i++) {
++ 	for(i = 0; i < maxdatalen-offset-1 && i < len; i++) {
+ 		if(app_data[i] != '\0') {
+ 			/* the kernel version of tolower mungs 'upper ascii' */
+-			master_conntrack->layer7.app_data[length+oldlength] =
++			target[length+offset] =
+ 				isascii(app_data[i])? 
+ 					tolower(app_data[i]) : app_data[i];
+ 			length++;
+ 		}
+ 	}
++	target[length+offset] = '\0';
++
++	return length;
++}
++
++/* add the new app data to the conntrack.  Return number of bytes added. */
++static int add_data(struct nf_conn * master_conntrack,
++                    char * app_data, int appdatalen)
++{
++	int length;
+ 
+-	master_conntrack->layer7.app_data[length+oldlength] = '\0';
+-	master_conntrack->layer7.app_data_len = length + oldlength;
++	length = add_datastr(master_conntrack->layer7.app_data, master_conntrack->layer7.app_data_len, app_data, appdatalen);
++	master_conntrack->layer7.app_data_len += length;
+ 
+ 	return length;
+ }
+@@ -438,7 +440,7 @@ match(const struct sk_buff *skbin,
+ 
+ 	enum ip_conntrack_info master_ctinfo, ctinfo;
+ 	struct nf_conn *master_conntrack, *conntrack;
+-	unsigned char * app_data;
++	unsigned char *app_data, *tmp_data;
+ 	unsigned int pattern_result, appdatalen;
+ 	regexp * comppattern;
+ 
+@@ -466,8 +468,8 @@ match(const struct sk_buff *skbin,
+ 		master_conntrack = master_ct(master_conntrack);
+ 
+ 	/* if we've classified it or seen too many packets */
+-	if(total_acct_packets(master_conntrack) > num_packets ||
+-	   master_conntrack->layer7.app_proto) {
++	if(!info->pkt && (total_acct_packets(master_conntrack) > num_packets ||
++	   master_conntrack->layer7.app_proto)) {
+ 
+ 		pattern_result = match_no_append(conntrack, master_conntrack, 
+ 						 ctinfo, master_ctinfo, info);
+@@ -500,6 +502,25 @@ match(const struct sk_buff *skbin,
+ 	/* the return value gets checked later, when we're ready to use it */
+ 	comppattern = compile_and_cache(info->pattern, info->protocol);
+ 
++	if (info->pkt) {
++		tmp_data = kmalloc(maxdatalen, GFP_ATOMIC);
++		if(!tmp_data){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in match, bailing.\n");
++			return info->invert;
++		}
++
++		tmp_data[0] = '\0';
++		add_datastr(tmp_data, 0, app_data, appdatalen);
++		pattern_result = ((comppattern && regexec(comppattern, tmp_data)) ? 1 : 0);
++
++		kfree(tmp_data);
++		tmp_data = NULL;
++		spin_unlock_bh(&l7_lock);
++
++		return (pattern_result ^ info->invert);
++	}
++
+ 	/* On the first packet of a connection, allocate space for app data */
+ 	if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] && 
+ 	   !master_conntrack->layer7.app_data){

target/linux/generic/patches-3.1/602-netfilter_layer7_match.patch

@@ -0,0 +1,51 @@
+--- a/net/netfilter/xt_layer7.c
++++ b/net/netfilter/xt_layer7.c
+@@ -415,7 +415,9 @@ static int layer7_write_proc(struct file
+ }
+ 
+ static bool
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)
++match(const struct sk_buff *skbin, struct xt_action_param *par)
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
+ match(const struct sk_buff *skbin, const struct xt_match_param *par)
+ #else
+ match(const struct sk_buff *skbin,
+@@ -597,14 +599,19 @@ match(const struct sk_buff *skbin,
+ }
+ 
+ // load nf_conntrack_ipv4
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)
++static int
++#else
++static bool
++#endif
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
+-static bool check(const struct xt_mtchk_param *par)
++check(const struct xt_mtchk_param *par)
+ {
+         if (nf_ct_l3proto_try_module_get(par->match->family) < 0) {
+                 printk(KERN_WARNING "can't load conntrack support for "
+                                     "proto=%d\n", par->match->family);
+ #else
+-static bool check(const char *tablename, const void *inf,
++check(const char *tablename, const void *inf,
+ 		 const struct xt_match *match, void *matchinfo,
+ 		 unsigned int hook_mask)
+ {
+@@ -612,9 +619,15 @@ static bool check(const char *tablename,
+                 printk(KERN_WARNING "can't load conntrack support for "
+                                     "proto=%d\n", match->family);
+ #endif
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)
++		return -EINVAL;
++	}
++	return 0;
++#else
+                 return 0;
+         }
+ 	return 1;
++#endif
+ }
+ 
+ 

target/linux/generic/patches-3.1/603-netfilter_layer7_2.6.36_fix.patch

@@ -0,0 +1,61 @@
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -832,6 +832,27 @@ config NETFILTER_XT_MATCH_IPVS
+ 
+ 	  If unsure, say N.
+ 
++config NETFILTER_XT_MATCH_LAYER7
++	tristate '"layer7" match support'
++	depends on EXPERIMENTAL
++	depends on NETFILTER_XTABLES
++	depends on NETFILTER_ADVANCED
++	depends on NF_CONNTRACK
++	help
++	  Say Y if you want to be able to classify connections (and their
++	  packets) based on regular expression matching of their application
++	  layer data.   This is one way to classify applications such as
++	  peer-to-peer filesharing systems that do not always use the same
++	  port.
++
++	  To compile it as a module, choose M here.  If unsure, say N.
++
++config NETFILTER_XT_MATCH_LAYER7_DEBUG
++	bool 'Layer 7 debugging output'
++	depends on NETFILTER_XT_MATCH_LAYER7
++	help
++	  Say Y to get lots of debugging output.
++
+ config NETFILTER_XT_MATCH_LENGTH
+ 	tristate '"length" match support'
+ 	depends on NETFILTER_ADVANCED
+@@ -1018,26 +1039,11 @@ config NETFILTER_XT_MATCH_STATE
+ 
+ 	  To compile it as a module, choose M here.  If unsure, say N.
+ 
+-config NETFILTER_XT_MATCH_LAYER7
+-	tristate '"layer7" match support'
+-	depends on NETFILTER_XTABLES
+-	depends on EXPERIMENTAL && (IP_NF_CONNTRACK || NF_CONNTRACK)
+-       depends on NETFILTER_ADVANCED
+-	help
+-	  Say Y if you want to be able to classify connections (and their
+-	  packets) based on regular expression matching of their application
+-	  layer data.   This is one way to classify applications such as
+-	  peer-to-peer filesharing systems that do not always use the same
+-	  port.
+-
+-	  To compile it as a module, choose M here.  If unsure, say N.
+-
+ config NETFILTER_XT_MATCH_LAYER7_DEBUG
+-        bool 'Layer 7 debugging output'
+-        depends on NETFILTER_XT_MATCH_LAYER7
+-        help
+-          Say Y to get lots of debugging output.
+-
++	bool 'Layer 7 debugging output'
++	depends on NETFILTER_XT_MATCH_LAYER7
++	help
++	  Say Y to get lots of debugging output.
+ 
+ config NETFILTER_XT_MATCH_STATISTIC
+ 	tristate '"statistic" match support'

target/linux/generic/patches-3.1/604-netfilter_cisco_794x_iphone.patch

@@ -0,0 +1,118 @@
+--- a/include/linux/netfilter/nf_conntrack_sip.h
++++ b/include/linux/netfilter/nf_conntrack_sip.h
+@@ -2,12 +2,15 @@
+ #define __NF_CONNTRACK_SIP_H__
+ #ifdef __KERNEL__
+ 
++#include <linux/types.h>
++
+ #define SIP_PORT	5060
+ #define SIP_TIMEOUT	3600
+ 
+ struct nf_ct_sip_master {
+ 	unsigned int	register_cseq;
+ 	unsigned int	invite_cseq;
++	__be16		forced_dport;
+ };
+ 
+ enum sip_expectation_classes {
+--- a/net/ipv4/netfilter/nf_nat_sip.c
++++ b/net/ipv4/netfilter/nf_nat_sip.c
+@@ -73,6 +73,7 @@ static int map_addr(struct sk_buff *skb,
+ 	enum ip_conntrack_info ctinfo;
+ 	struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
+ 	enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
++	struct nf_conn_help *help = nfct_help(ct);
+ 	char buffer[sizeof("nnn.nnn.nnn.nnn:nnnnn")];
+ 	unsigned int buflen;
+ 	__be32 newaddr;
+@@ -85,7 +86,8 @@ static int map_addr(struct sk_buff *skb,
+ 	} else if (ct->tuplehash[dir].tuple.dst.u3.ip == addr->ip &&
+ 		   ct->tuplehash[dir].tuple.dst.u.udp.port == port) {
+ 		newaddr = ct->tuplehash[!dir].tuple.src.u3.ip;
+-		newport = ct->tuplehash[!dir].tuple.src.u.udp.port;
++		newport = help->help.ct_sip_info.forced_dport ? :
++			  ct->tuplehash[!dir].tuple.src.u.udp.port;
+ 	} else
+ 		return 1;
+ 
+@@ -121,6 +123,7 @@ static unsigned int ip_nat_sip(struct sk
+ 	enum ip_conntrack_info ctinfo;
+ 	struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
+ 	enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
++	struct nf_conn_help *help = nfct_help(ct);
+ 	unsigned int coff, matchoff, matchlen;
+ 	enum sip_header_types hdr;
+ 	union nf_inet_addr addr;
+@@ -229,6 +232,20 @@ next:
+ 	    !map_sip_addr(skb, dataoff, dptr, datalen, SIP_HDR_TO))
+ 		return NF_DROP;
+ 
++	/* Mangle destination port for Cisco phones, then fix up checksums */
++	if (dir == IP_CT_DIR_REPLY && help->help.ct_sip_info.forced_dport) {
++		struct udphdr *uh;
++
++		if (!skb_make_writable(skb, skb->len))
++			return NF_DROP;
++
++		uh = (struct udphdr *)(skb->data + ip_hdrlen(skb));
++		uh->dest = help->help.ct_sip_info.forced_dport;
++
++		if (!nf_nat_mangle_udp_packet(skb, ct, ctinfo, 0, 0, NULL, 0))
++			return NF_DROP;
++	}
++
+ 	return NF_ACCEPT;
+ }
+ 
+@@ -280,8 +297,10 @@ static unsigned int ip_nat_sip_expect(st
+ 	enum ip_conntrack_info ctinfo;
+ 	struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
+ 	enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
++	struct nf_conn_help *help = nfct_help(ct);
+ 	__be32 newip;
+ 	u_int16_t port;
++	__be16 srcport;
+ 	char buffer[sizeof("nnn.nnn.nnn.nnn:nnnnn")];
+ 	unsigned buflen;
+ 
+@@ -294,8 +313,9 @@ static unsigned int ip_nat_sip_expect(st
+ 	/* If the signalling port matches the connection's source port in the
+ 	 * original direction, try to use the destination port in the opposite
+ 	 * direction. */
+-	if (exp->tuple.dst.u.udp.port ==
+-	    ct->tuplehash[dir].tuple.src.u.udp.port)
++	srcport = help->help.ct_sip_info.forced_dport ? :
++		  ct->tuplehash[dir].tuple.src.u.udp.port;
++	if (exp->tuple.dst.u.udp.port == srcport)
+ 		port = ntohs(ct->tuplehash[!dir].tuple.dst.u.udp.port);
+ 	else
+ 		port = ntohs(exp->tuple.dst.u.udp.port);
+--- a/net/netfilter/nf_conntrack_sip.c
++++ b/net/netfilter/nf_conntrack_sip.c
+@@ -1363,8 +1363,25 @@ static int process_sip_request(struct sk
+ {
+ 	enum ip_conntrack_info ctinfo;
+ 	struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
++	struct nf_conn_help *help = nfct_help(ct);
++	enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
+ 	unsigned int matchoff, matchlen;
+ 	unsigned int cseq, i;
++	union nf_inet_addr addr;
++	__be16 port;
++
++	/* Many Cisco IP phones use a high source port for SIP requests, but
++	 * listen for the response on port 5060.  If we are the local
++	 * router for one of these phones, save the port number from the
++	 * Via: header so that nf_nat_sip can redirect the responses to
++	 * the correct port.
++	 */
++	if (ct_sip_parse_header_uri(ct, *dptr, NULL, *datalen,
++				    SIP_HDR_VIA_UDP, NULL, &matchoff,
++				    &matchlen, &addr, &port) > 0 &&
++	    port != ct->tuplehash[dir].tuple.src.u.udp.port &&
++	    nf_inet_addr_cmp(&addr, &ct->tuplehash[dir].tuple.src.u3))
++		help->help.ct_sip_info.forced_dport = port;
+ 
+ 	for (i = 0; i < ARRAY_SIZE(sip_handlers); i++) {
+ 		const struct sip_handler *handler;

target/linux/generic/patches-3.1/610-netfilter_match_bypass_default_checks.patch

@@ -0,0 +1,90 @@
+--- a/include/linux/netfilter_ipv4/ip_tables.h
++++ b/include/linux/netfilter_ipv4/ip_tables.h
+@@ -93,6 +93,7 @@ struct ipt_ip {
+ #define IPT_F_FRAG		0x01	/* Set if rule is a fragment rule */
+ #define IPT_F_GOTO		0x02	/* Set if jump is a goto */
+ #define IPT_F_MASK		0x03	/* All possible flag bits mask. */
++#define IPT_F_NO_DEF_MATCH	0x80	/* Internal: no default match rules present */
+ 
+ /* Values for "inv" field in struct ipt_ip. */
+ #define IPT_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
+--- a/net/ipv4/netfilter/ip_tables.c
++++ b/net/ipv4/netfilter/ip_tables.c
+@@ -81,6 +81,9 @@ ip_packet_match(const struct iphdr *ip,
+ 
+ #define FWINV(bool, invflg) ((bool) ^ !!(ipinfo->invflags & (invflg)))
+ 
++	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
++		return true;
++
+ 	if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
+ 		  IPT_INV_SRCIP) ||
+ 	    FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
+@@ -134,6 +137,26 @@ ip_packet_match(const struct iphdr *ip,
+ 	return true;
+ }
+ 
++static void
++ip_checkdefault(struct ipt_ip *ip)
++{
++	static const char iface_mask[IFNAMSIZ] = {};
++
++	if (ip->invflags || ip->flags & IPT_F_FRAG)
++		return;
++
++	if (memcmp(ip->iniface_mask, iface_mask, IFNAMSIZ) != 0)
++		return;
++
++	if (memcmp(ip->outiface_mask, iface_mask, IFNAMSIZ) != 0)
++		return;
++
++	if (ip->proto)
++		return;
++
++	ip->flags |= IPT_F_NO_DEF_MATCH;
++}
++
+ static bool
+ ip_checkentry(const struct ipt_ip *ip)
+ {
+@@ -561,7 +584,7 @@ static void cleanup_match(struct xt_entr
+ }
+ 
+ static int
+-check_entry(const struct ipt_entry *e, const char *name)
++check_entry(struct ipt_entry *e, const char *name)
+ {
+ 	const struct xt_entry_target *t;
+ 
+@@ -570,6 +593,8 @@ check_entry(const struct ipt_entry *e, c
+ 		return -EINVAL;
+ 	}
+ 
++	ip_checkdefault(&e->ip);
++
+ 	if (e->target_offset + sizeof(struct xt_entry_target) >
+ 	    e->next_offset)
+ 		return -EINVAL;
+@@ -931,6 +956,7 @@ copy_entries_to_user(unsigned int total_
+ 	const struct xt_table_info *private = table->private;
+ 	int ret = 0;
+ 	const void *loc_cpu_entry;
++	u8 flags;
+ 
+ 	counters = alloc_counters(table);
+ 	if (IS_ERR(counters))
+@@ -961,6 +987,14 @@ copy_entries_to_user(unsigned int total_
+ 			ret = -EFAULT;
+ 			goto free_counters;
+ 		}
++
++		flags = e->ip.flags & IPT_F_MASK;
++		if (copy_to_user(userptr + off
++				 + offsetof(struct ipt_entry, ip.flags),
++				 &flags, sizeof(flags)) != 0) {
++			ret = -EFAULT;
++			goto free_counters;
++		}
+ 
+ 		for (i = sizeof(struct ipt_entry);
+ 		     i < e->target_offset;

target/linux/generic/patches-3.1/611-netfilter_match_bypass_default_table.patch

@@ -0,0 +1,81 @@
+--- a/net/ipv4/netfilter/ip_tables.c
++++ b/net/ipv4/netfilter/ip_tables.c
+@@ -307,6 +307,33 @@ struct ipt_entry *ipt_next_entry(const s
+ 	return (void *)entry + entry->next_offset;
+ }
+ 
++static bool
++ipt_handle_default_rule(struct ipt_entry *e, unsigned int *verdict)
++{
++	struct xt_entry_target *t;
++	struct xt_standard_target *st;
++
++	if (e->target_offset != sizeof(struct ipt_entry))
++		return false;
++
++	if (!(e->ip.flags & IPT_F_NO_DEF_MATCH))
++		return false;
++
++	t = ipt_get_target(e);
++	if (t->u.kernel.target->target)
++		return false;
++
++	st = (struct xt_standard_target *) t;
++	if (st->verdict == XT_RETURN)
++		return false;
++
++	if (st->verdict >= 0)
++		return false;
++
++	*verdict = (unsigned)(-st->verdict) - 1;
++	return true;
++}
++
+ /* Returns one of the generic firewall policies, like NF_ACCEPT. */
+ unsigned int
+ ipt_do_table(struct sk_buff *skb,
+@@ -331,6 +358,25 @@ ipt_do_table(struct sk_buff *skb,
+ 	ip = ip_hdr(skb);
+ 	indev = in ? in->name : nulldevname;
+ 	outdev = out ? out->name : nulldevname;
++
++	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
++	local_bh_disable();
++	addend = xt_write_recseq_begin();
++	private = table->private;
++	cpu        = smp_processor_id();
++	table_base = private->entries[cpu];
++	jumpstack  = (struct ipt_entry **)private->jumpstack[cpu];
++	stackptr   = per_cpu_ptr(private->stackptr, cpu);
++	origptr    = *stackptr;
++
++	e = get_entry(table_base, private->hook_entry[hook]);
++	if (ipt_handle_default_rule(e, &verdict)) {
++		ADD_COUNTER(e->counters, skb->len, 1);
++		xt_write_recseq_end(addend);
++		local_bh_enable();
++		return verdict;
++	}
++
+ 	/* We handle fragments by dealing with the first fragment as
+ 	 * if it was a normal packet.  All other fragments are treated
+ 	 * normally, except that they will NEVER match rules that ask
+@@ -345,18 +391,6 @@ ipt_do_table(struct sk_buff *skb,
+ 	acpar.family  = NFPROTO_IPV4;
+ 	acpar.hooknum = hook;
+ 
+-	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
+-	local_bh_disable();
+-	addend = xt_write_recseq_begin();
+-	private = table->private;
+-	cpu        = smp_processor_id();
+-	table_base = private->entries[cpu];
+-	jumpstack  = (struct ipt_entry **)private->jumpstack[cpu];
+-	stackptr   = per_cpu_ptr(private->stackptr, cpu);
+-	origptr    = *stackptr;
+-
+-	e = get_entry(table_base, private->hook_entry[hook]);
+-
+ 	pr_debug("Entering %s(hook %u); sp at %u (UF %p)\n",
+ 		 table->name, hook, origptr,
+ 		 get_entry(table_base, private->underflow[hook]));

target/linux/generic/patches-3.1/612-netfilter_match_reduce_memory_access.patch

@@ -0,0 +1,16 @@
+--- a/net/ipv4/netfilter/ip_tables.c
++++ b/net/ipv4/netfilter/ip_tables.c
+@@ -84,9 +84,11 @@ ip_packet_match(const struct iphdr *ip,
+ 	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
+ 		return true;
+ 
+-	if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
++	if (FWINV(ipinfo->smsk.s_addr &&
++		  (ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
+ 		  IPT_INV_SRCIP) ||
+-	    FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
++	    FWINV(ipinfo->smsk.s_addr &&
++		  (ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
+ 		  IPT_INV_DSTIP)) {
+ 		dprintf("Source or dest mismatch.\n");
+ 

target/linux/generic/patches-3.1/613-netfilter_optional_tcp_window_check.patch

@@ -0,0 +1,36 @@
+--- a/net/netfilter/nf_conntrack_proto_tcp.c
++++ b/net/netfilter/nf_conntrack_proto_tcp.c
+@@ -29,6 +29,9 @@
+ #include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
+ #include <net/netfilter/ipv6/nf_conntrack_ipv6.h>
+ 
++/* Do not check the TCP window for incoming packets  */
++static int nf_ct_tcp_no_window_check __read_mostly = 1;
++
+ /* "Be conservative in what you do,
+     be liberal in what you accept from others."
+     If it's non-zero, we mark only out of window RST segments as INVALID. */
+@@ -524,6 +527,9 @@ static bool tcp_in_window(const struct n
+ 	s16 receiver_offset;
+ 	bool res;
+ 
++	if (nf_ct_tcp_no_window_check)
++		return true;
++
+ 	/*
+ 	 * Get the required data from the packet.
+ 	 */
+@@ -1321,6 +1327,13 @@ static struct ctl_table tcp_sysctl_table
+ 		.proc_handler	= proc_dointvec,
+ 	},
+ 	{
++		.procname       = "nf_conntrack_tcp_no_window_check",
++		.data           = &nf_ct_tcp_no_window_check,
++		.maxlen         = sizeof(unsigned int),
++		.mode           = 0644,
++		.proc_handler   = proc_dointvec,
++	},
++	{
+ 		.procname       = "nf_conntrack_tcp_be_liberal",
+ 		.data           = &nf_ct_tcp_be_liberal,
+ 		.maxlen         = sizeof(unsigned int),

target/linux/generic/patches-3.1/620-sched_esfq.patch

@@ -0,0 +1,795 @@
+--- a/include/linux/pkt_sched.h
++++ b/include/linux/pkt_sched.h
+@@ -173,8 +173,37 @@ struct tc_sfq_xstats {
+  *
+  *	The only reason for this is efficiency, it is possible
+  *	to change these parameters in compile time.
++ *
++ *	If you need to play with these values, use esfq instead.
+  */
+ 
++/* ESFQ section */
++
++enum
++{
++        /* traditional */
++	TCA_SFQ_HASH_CLASSIC,
++	TCA_SFQ_HASH_DST,
++	TCA_SFQ_HASH_SRC,
++	TCA_SFQ_HASH_FWMARK,
++	/* conntrack */
++	TCA_SFQ_HASH_CTORIGDST,
++	TCA_SFQ_HASH_CTORIGSRC,
++	TCA_SFQ_HASH_CTREPLDST,
++	TCA_SFQ_HASH_CTREPLSRC,
++	TCA_SFQ_HASH_CTNATCHG,
++};
++
++struct tc_esfq_qopt
++{
++	unsigned	quantum;	/* Bytes per round allocated to flow */
++	int		perturb_period;	/* Period of hash perturbation */
++	__u32		limit;		/* Maximal packets in queue */
++	unsigned	divisor;	/* Hash divisor  */
++	unsigned	flows;		/* Maximal number of flows  */
++	unsigned	hash_kind;	/* Hash function to use for flow identification */
++};
++
+ /* RED section */
+ 
+ enum {
+--- a/net/sched/Kconfig
++++ b/net/sched/Kconfig
+@@ -148,6 +148,37 @@ config NET_SCH_SFQ
+ 	  To compile this code as a module, choose M here: the
+ 	  module will be called sch_sfq.
+ 
++config NET_SCH_ESFQ
++	tristate "Enhanced Stochastic Fairness Queueing (ESFQ)"
++	---help---
++	  Say Y here if you want to use the Enhanced Stochastic Fairness
++	  Queueing (ESFQ) packet scheduling algorithm for some of your network
++	  devices or as a leaf discipline for a classful qdisc such as HTB or
++	  CBQ (see the top of <file:net/sched/sch_esfq.c> for details and
++	  references to the SFQ algorithm).
++
++	  This is an enchanced SFQ version which allows you to control some
++	  hardcoded values in the SFQ scheduler.
++
++	  ESFQ also adds control of the hash function used to identify packet
++	  flows. The original SFQ discipline hashes by connection; ESFQ add
++	  several other hashing methods, such as by src IP or by dst IP, which
++	  can be more fair to users in some networking situations.
++
++	  To compile this code as a module, choose M here: the
++	  module will be called sch_esfq.
++
++config NET_SCH_ESFQ_NFCT
++	bool "Connection Tracking Hash Types"
++	depends on NET_SCH_ESFQ && NF_CONNTRACK
++	---help---
++	  Say Y here to enable support for hashing based on netfilter connection
++	  tracking information. This is useful for a router that is also using
++	  NAT to connect privately-addressed hosts to the Internet. If you want
++	  to provide fair distribution of upstream bandwidth, ESFQ must use
++	  connection tracking information, since all outgoing packets will share
++	  the same source address.
++
+ config NET_SCH_TEQL
+ 	tristate "True Link Equalizer (TEQL)"
+ 	---help---
+--- a/net/sched/Makefile
++++ b/net/sched/Makefile
+@@ -26,6 +26,7 @@ obj-$(CONFIG_NET_SCH_INGRESS)	+= sch_ing
+ obj-$(CONFIG_NET_SCH_DSMARK)	+= sch_dsmark.o
+ obj-$(CONFIG_NET_SCH_SFB)	+= sch_sfb.o
+ obj-$(CONFIG_NET_SCH_SFQ)	+= sch_sfq.o
++obj-$(CONFIG_NET_SCH_ESFQ)	+= sch_esfq.o
+ obj-$(CONFIG_NET_SCH_TBF)	+= sch_tbf.o
+ obj-$(CONFIG_NET_SCH_TEQL)	+= sch_teql.o
+ obj-$(CONFIG_NET_SCH_PRIO)	+= sch_prio.o
+--- /dev/null
++++ b/net/sched/sch_esfq.c
+@@ -0,0 +1,702 @@
++/*
++ * net/sched/sch_esfq.c	Extended Stochastic Fairness Queueing discipline.
++ *
++ *		This program is free software; you can redistribute it and/or
++ *		modify it under the terms of the GNU General Public License
++ *		as published by the Free Software Foundation; either version
++ *		2 of the License, or (at your option) any later version.
++ *
++ * Authors:	Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru>
++ *
++ * Changes:	Alexander Atanasov, <alex@ssi.bg>
++ *		Added dynamic depth,limit,divisor,hash_kind options.
++ *		Added dst and src hashes.
++ *
++ * 		Alexander Clouter, <alex@digriz.org.uk>
++ *		Ported ESFQ to Linux 2.6.
++ *
++ * 		Corey Hickey, <bugfood-c@fatooh.org>
++ *		Maintenance of the Linux 2.6 port.
++ *		Added fwmark hash (thanks to Robert Kurjata).
++ *		Added usage of jhash.
++ *		Added conntrack support.
++ *		Added ctnatchg hash (thanks to Ben Pfountz).
++ */
++
++#include <linux/module.h>
++#include <asm/uaccess.h>
++#include <asm/system.h>
++#include <linux/bitops.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/jiffies.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/socket.h>
++#include <linux/sockios.h>
++#include <linux/in.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/if_ether.h>
++#include <linux/inet.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/notifier.h>
++#include <linux/init.h>
++#include <net/ip.h>
++#include <net/netlink.h>
++#include <linux/ipv6.h>
++#include <net/route.h>
++#include <linux/skbuff.h>
++#include <net/sock.h>
++#include <net/pkt_sched.h>
++#include <linux/jhash.h>
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++#include <net/netfilter/nf_conntrack.h>
++#endif
++
++/*	Stochastic Fairness Queuing algorithm.
++	For more comments look at sch_sfq.c.
++	The difference is that you can change limit, depth,
++	hash table size and choose alternate hash types.
++
++	classic:	same as in sch_sfq.c
++	dst:		destination IP address
++	src:		source IP address
++	fwmark:		netfilter mark value
++	ctorigdst:	original destination IP address
++	ctorigsrc:	original source IP address
++	ctrepldst:	reply destination IP address
++	ctreplsrc:	reply source IP
++
++*/
++
++#define ESFQ_HEAD 0
++#define ESFQ_TAIL 1
++
++/* This type should contain at least SFQ_DEPTH*2 values */
++typedef unsigned int esfq_index;
++
++struct esfq_head
++{
++	esfq_index	next;
++	esfq_index	prev;
++};
++
++struct esfq_sched_data
++{
++/* Parameters */
++	int		perturb_period;
++	unsigned	quantum;	/* Allotment per round: MUST BE >= MTU */
++	int		limit;
++	unsigned	depth;
++	unsigned	hash_divisor;
++	unsigned	hash_kind;
++/* Variables */
++	struct timer_list perturb_timer;
++	int		perturbation;
++	esfq_index	tail;		/* Index of current slot in round */
++	esfq_index	max_depth;	/* Maximal depth */
++
++	esfq_index	*ht;			/* Hash table */
++	esfq_index	*next;			/* Active slots link */
++	short		*allot;			/* Current allotment per slot */
++	unsigned short	*hash;			/* Hash value indexed by slots */
++	struct sk_buff_head	*qs;		/* Slot queue */
++	struct esfq_head	*dep;		/* Linked list of slots, indexed by depth */
++};
++
++/* This contains the info we will hash. */
++struct esfq_packet_info
++{
++	u32	proto;		/* protocol or port */
++	u32	src;		/* source from packet header */
++	u32	dst;		/* destination from packet header */
++	u32	ctorigsrc;	/* original source from conntrack */
++	u32	ctorigdst;	/* original destination from conntrack */
++	u32	ctreplsrc;	/* reply source from conntrack */
++	u32	ctrepldst;	/* reply destination from conntrack */
++	u32	mark;		/* netfilter mark (fwmark) */
++};
++
++static __inline__ unsigned esfq_jhash_1word(struct esfq_sched_data *q,u32 a)
++{
++	return jhash_1word(a, q->perturbation) & (q->hash_divisor-1);
++}
++
++static __inline__ unsigned esfq_jhash_2words(struct esfq_sched_data *q, u32 a, u32 b)
++{
++	return jhash_2words(a, b, q->perturbation) & (q->hash_divisor-1);
++}
++
++static __inline__ unsigned esfq_jhash_3words(struct esfq_sched_data *q, u32 a, u32 b, u32 c)
++{
++	return jhash_3words(a, b, c, q->perturbation) & (q->hash_divisor-1);
++}
++
++static unsigned esfq_hash(struct esfq_sched_data *q, struct sk_buff *skb)
++{
++	struct esfq_packet_info info;
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	enum ip_conntrack_info ctinfo;
++	struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
++#endif
++
++	switch (skb->protocol) {
++	case __constant_htons(ETH_P_IP):
++	{
++		struct iphdr *iph = ip_hdr(skb);
++		info.dst = iph->daddr;
++		info.src = iph->saddr;
++		if (!(iph->frag_off&htons(IP_MF|IP_OFFSET)) &&
++		    (iph->protocol == IPPROTO_TCP ||
++		     iph->protocol == IPPROTO_UDP ||
++		     iph->protocol == IPPROTO_SCTP ||
++		     iph->protocol == IPPROTO_DCCP ||
++		     iph->protocol == IPPROTO_ESP))
++			info.proto = *(((u32*)iph) + iph->ihl);
++		else
++			info.proto = iph->protocol;
++		break;
++	}
++	case __constant_htons(ETH_P_IPV6):
++	{
++		struct ipv6hdr *iph = ipv6_hdr(skb);
++		/* Hash ipv6 addresses into a u32. This isn't ideal,
++		 * but the code is simple. */
++		info.dst = jhash2(iph->daddr.s6_addr32, 4, q->perturbation);
++		info.src = jhash2(iph->saddr.s6_addr32, 4, q->perturbation);
++		if (iph->nexthdr == IPPROTO_TCP ||
++		    iph->nexthdr == IPPROTO_UDP ||
++		    iph->nexthdr == IPPROTO_SCTP ||
++		    iph->nexthdr == IPPROTO_DCCP ||
++		    iph->nexthdr == IPPROTO_ESP)
++			info.proto = *(u32*)&iph[1];
++		else
++			info.proto = iph->nexthdr;
++		break;
++	}
++	default:
++		info.dst   = (u32)(unsigned long)skb_dst(skb);
++		info.src   = (u32)(unsigned long)skb->sk;
++		info.proto = skb->protocol;
++	}
++
++	info.mark = skb->mark;
++
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	/* defaults if there is no conntrack info */
++	info.ctorigsrc = info.src;
++	info.ctorigdst = info.dst;
++	info.ctreplsrc = info.dst;
++	info.ctrepldst = info.src;
++	/* collect conntrack info */
++	if (ct && ct != &nf_conntrack_untracked) {
++		if (skb->protocol == __constant_htons(ETH_P_IP)) {
++			info.ctorigsrc = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++			info.ctorigdst = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip;
++			info.ctreplsrc = ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip;
++			info.ctrepldst = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip;
++		}
++		else if (skb->protocol == __constant_htons(ETH_P_IPV6)) {
++			/* Again, hash ipv6 addresses into a single u32. */
++			info.ctorigsrc = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip6, 4, q->perturbation);
++			info.ctorigdst = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip6, 4, q->perturbation);
++			info.ctreplsrc = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip6, 4, q->perturbation);
++			info.ctrepldst = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip6, 4, q->perturbation);
++		}
++
++	}
++#endif
++
++	switch(q->hash_kind) {
++	case TCA_SFQ_HASH_CLASSIC:
++		return esfq_jhash_3words(q, info.dst, info.src, info.proto);
++	case TCA_SFQ_HASH_DST:
++		return esfq_jhash_1word(q, info.dst);
++	case TCA_SFQ_HASH_SRC:
++		return esfq_jhash_1word(q, info.src);
++	case TCA_SFQ_HASH_FWMARK:
++		return esfq_jhash_1word(q, info.mark);
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	case TCA_SFQ_HASH_CTORIGDST:
++		return esfq_jhash_1word(q, info.ctorigdst);
++	case TCA_SFQ_HASH_CTORIGSRC:
++		return esfq_jhash_1word(q, info.ctorigsrc);
++	case TCA_SFQ_HASH_CTREPLDST:
++		return esfq_jhash_1word(q, info.ctrepldst);
++	case TCA_SFQ_HASH_CTREPLSRC:
++		return esfq_jhash_1word(q, info.ctreplsrc);
++	case TCA_SFQ_HASH_CTNATCHG:
++	{
++		if (info.ctorigdst == info.ctreplsrc)
++			return esfq_jhash_1word(q, info.ctorigsrc);
++		return esfq_jhash_1word(q, info.ctreplsrc);
++	}
++#endif
++	default:
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Unknown hash method. Falling back to classic.\n");
++	}
++	return esfq_jhash_3words(q, info.dst, info.src, info.proto);
++}
++
++static inline void esfq_link(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++	int d = q->qs[x].qlen + q->depth;
++
++	p = d;
++	n = q->dep[d].next;
++	q->dep[x].next = n;
++	q->dep[x].prev = p;
++	q->dep[p].next = q->dep[n].prev = x;
++}
++
++static inline void esfq_dec(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++
++	n = q->dep[x].next;
++	p = q->dep[x].prev;
++	q->dep[p].next = n;
++	q->dep[n].prev = p;
++
++	if (n == p && q->max_depth == q->qs[x].qlen + 1)
++		q->max_depth--;
++
++	esfq_link(q, x);
++}
++
++static inline void esfq_inc(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++	int d;
++
++	n = q->dep[x].next;
++	p = q->dep[x].prev;
++	q->dep[p].next = n;
++	q->dep[n].prev = p;
++	d = q->qs[x].qlen;
++	if (q->max_depth < d)
++		q->max_depth = d;
++
++	esfq_link(q, x);
++}
++
++static unsigned int esfq_drop(struct Qdisc *sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_index d = q->max_depth;
++	struct sk_buff *skb;
++	unsigned int len;
++
++	/* Queue is full! Find the longest slot and
++	   drop a packet from it */
++
++	if (d > 1) {
++		esfq_index x = q->dep[d+q->depth].next;
++		skb = q->qs[x].prev;
++		len = skb->len;
++		__skb_unlink(skb, &q->qs[x]);
++		kfree_skb(skb);
++		esfq_dec(q, x);
++		sch->q.qlen--;
++		sch->qstats.drops++;
++		sch->qstats.backlog -= len;
++		return len;
++	}
++
++	if (d == 1) {
++		/* It is difficult to believe, but ALL THE SLOTS HAVE LENGTH 1. */
++		d = q->next[q->tail];
++		q->next[q->tail] = q->next[d];
++		q->allot[q->next[d]] += q->quantum;
++		skb = q->qs[d].prev;
++		len = skb->len;
++		__skb_unlink(skb, &q->qs[d]);
++		kfree_skb(skb);
++		esfq_dec(q, d);
++		sch->q.qlen--;
++		q->ht[q->hash[d]] = q->depth;
++		sch->qstats.drops++;
++		sch->qstats.backlog -= len;
++		return len;
++	}
++
++	return 0;
++}
++
++static void esfq_q_enqueue(struct sk_buff *skb, struct esfq_sched_data *q, unsigned int end)
++{
++	unsigned hash = esfq_hash(q, skb);
++	unsigned depth = q->depth;
++	esfq_index x;
++
++	x = q->ht[hash];
++	if (x == depth) {
++		q->ht[hash] = x = q->dep[depth].next;
++		q->hash[x] = hash;
++	}
++
++	if (end == ESFQ_TAIL)
++		__skb_queue_tail(&q->qs[x], skb);
++	else
++		__skb_queue_head(&q->qs[x], skb);
++
++	esfq_inc(q, x);
++	if (q->qs[x].qlen == 1) {		/* The flow is new */
++		if (q->tail == depth) {	/* It is the first flow */
++			q->tail = x;
++			q->next[x] = x;
++			q->allot[x] = q->quantum;
++		} else {
++			q->next[x] = q->next[q->tail];
++			q->next[q->tail] = x;
++			q->tail = x;
++		}
++	}
++}
++
++static int esfq_enqueue(struct sk_buff *skb, struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_q_enqueue(skb, q, ESFQ_TAIL);
++	sch->qstats.backlog += skb->len;
++	if (++sch->q.qlen < q->limit-1) {
++		sch->bstats.bytes += skb->len;
++		sch->bstats.packets++;
++		return 0;
++	}
++
++	sch->qstats.drops++;
++	esfq_drop(sch);
++	return NET_XMIT_CN;
++}
++
++static struct sk_buff *esfq_peek(struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_index a;
++
++	/* No active slots */
++	if (q->tail == q->depth)
++		return NULL;
++
++	a = q->next[q->tail];
++	return skb_peek(&q->qs[a]);
++}
++
++static struct sk_buff *esfq_q_dequeue(struct esfq_sched_data *q)
++{
++	struct sk_buff *skb;
++	unsigned depth = q->depth;
++	esfq_index a, old_a;
++
++	/* No active slots */
++	if (q->tail == depth)
++		return NULL;
++
++	a = old_a = q->next[q->tail];
++
++	/* Grab packet */
++	skb = __skb_dequeue(&q->qs[a]);
++	esfq_dec(q, a);
++
++	/* Is the slot empty? */
++	if (q->qs[a].qlen == 0) {
++		q->ht[q->hash[a]] = depth;
++		a = q->next[a];
++		if (a == old_a) {
++			q->tail = depth;
++			return skb;
++		}
++		q->next[q->tail] = a;
++		q->allot[a] += q->quantum;
++	} else if ((q->allot[a] -= skb->len) <= 0) {
++		q->tail = a;
++		a = q->next[a];
++		q->allot[a] += q->quantum;
++	}
++
++	return skb;
++}
++
++static struct sk_buff *esfq_dequeue(struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	struct sk_buff *skb;
++
++	skb = esfq_q_dequeue(q);
++	if (skb == NULL)
++		return NULL;
++	sch->q.qlen--;
++	sch->qstats.backlog -= skb->len;
++	return skb;
++}
++
++static void esfq_q_destroy(struct esfq_sched_data *q)
++{
++	del_timer(&q->perturb_timer);
++	if(q->ht)
++		kfree(q->ht);
++	if(q->dep)
++		kfree(q->dep);
++	if(q->next)
++		kfree(q->next);
++	if(q->allot)
++		kfree(q->allot);
++	if(q->hash)
++		kfree(q->hash);
++	if(q->qs)
++		kfree(q->qs);
++}
++
++static void esfq_destroy(struct Qdisc *sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_q_destroy(q);
++}
++
++
++static void esfq_reset(struct Qdisc* sch)
++{
++	struct sk_buff *skb;
++
++	while ((skb = esfq_dequeue(sch)) != NULL)
++		kfree_skb(skb);
++}
++
++static void esfq_perturbation(unsigned long arg)
++{
++	struct Qdisc *sch = (struct Qdisc*)arg;
++	struct esfq_sched_data *q = qdisc_priv(sch);
++
++	q->perturbation = net_random()&0x1F;
++
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	}
++}
++
++static unsigned int esfq_check_hash(unsigned int kind)
++{
++	switch (kind) {
++	case TCA_SFQ_HASH_CTORIGDST:
++	case TCA_SFQ_HASH_CTORIGSRC:
++	case TCA_SFQ_HASH_CTREPLDST:
++	case TCA_SFQ_HASH_CTREPLSRC:
++	case TCA_SFQ_HASH_CTNATCHG:
++#ifndef CONFIG_NET_SCH_ESFQ_NFCT
++	{
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Conntrack hash types disabled in kernel config. Falling back to classic.\n");
++		return TCA_SFQ_HASH_CLASSIC;
++	}
++#endif
++	case TCA_SFQ_HASH_CLASSIC:
++	case TCA_SFQ_HASH_DST:
++	case TCA_SFQ_HASH_SRC:
++	case TCA_SFQ_HASH_FWMARK:
++		return kind;
++	default:
++	{
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Unknown hash type. Falling back to classic.\n");
++		return TCA_SFQ_HASH_CLASSIC;
++	}
++	}
++}
++
++static int esfq_q_init(struct esfq_sched_data *q, struct nlattr *opt)
++{
++	struct tc_esfq_qopt *ctl = nla_data(opt);
++	esfq_index p = ~0U/2;
++	int i;
++
++	if (opt && opt->nla_len < nla_attr_size(sizeof(*ctl)))
++		return -EINVAL;
++
++	q->perturbation = 0;
++	q->hash_kind = TCA_SFQ_HASH_CLASSIC;
++	q->max_depth = 0;
++	if (opt == NULL) {
++		q->perturb_period = 0;
++		q->hash_divisor = 1024;
++		q->tail = q->limit = q->depth = 128;
++
++	} else {
++		struct tc_esfq_qopt *ctl = nla_data(opt);
++		if (ctl->quantum)
++			q->quantum = ctl->quantum;
++		q->perturb_period = ctl->perturb_period*HZ;
++		q->hash_divisor = ctl->divisor ? : 1024;
++		q->tail = q->limit = q->depth = ctl->flows ? : 128;
++
++		if ( q->depth > p - 1 )
++			return -EINVAL;
++
++		if (ctl->limit)
++			q->limit = min_t(u32, ctl->limit, q->depth);
++
++		if (ctl->hash_kind) {
++			q->hash_kind = esfq_check_hash(ctl->hash_kind);
++		}
++	}
++
++	q->ht = kmalloc(q->hash_divisor*sizeof(esfq_index), GFP_KERNEL);
++	if (!q->ht)
++		goto err_case;
++	q->dep = kmalloc((1+q->depth*2)*sizeof(struct esfq_head), GFP_KERNEL);
++	if (!q->dep)
++		goto err_case;
++	q->next = kmalloc(q->depth*sizeof(esfq_index), GFP_KERNEL);
++	if (!q->next)
++		goto err_case;
++	q->allot = kmalloc(q->depth*sizeof(short), GFP_KERNEL);
++	if (!q->allot)
++		goto err_case;
++	q->hash = kmalloc(q->depth*sizeof(unsigned short), GFP_KERNEL);
++	if (!q->hash)
++		goto err_case;
++	q->qs = kmalloc(q->depth*sizeof(struct sk_buff_head), GFP_KERNEL);
++	if (!q->qs)
++		goto err_case;
++
++	for (i=0; i< q->hash_divisor; i++)
++		q->ht[i] = q->depth;
++	for (i=0; i<q->depth; i++) {
++		skb_queue_head_init(&q->qs[i]);
++		q->dep[i+q->depth].next = i+q->depth;
++		q->dep[i+q->depth].prev = i+q->depth;
++	}
++
++	for (i=0; i<q->depth; i++)
++		esfq_link(q, i);
++	return 0;
++err_case:
++	esfq_q_destroy(q);
++	return -ENOBUFS;
++}
++
++static int esfq_init(struct Qdisc *sch, struct nlattr *opt)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	int err;
++
++	q->quantum = psched_mtu(qdisc_dev(sch)); /* default */
++	if ((err = esfq_q_init(q, opt)))
++		return err;
++
++	init_timer(&q->perturb_timer);
++	q->perturb_timer.data = (unsigned long)sch;
++	q->perturb_timer.function = esfq_perturbation;
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	}
++
++	return 0;
++}
++
++static int esfq_change(struct Qdisc *sch, struct nlattr *opt)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	struct esfq_sched_data new;
++	struct sk_buff *skb;
++	int err;
++
++	/* set up new queue */
++	memset(&new, 0, sizeof(struct esfq_sched_data));
++	new.quantum = psched_mtu(qdisc_dev(sch)); /* default */
++	if ((err = esfq_q_init(&new, opt)))
++		return err;
++
++	/* copy all packets from the old queue to the new queue */
++	sch_tree_lock(sch);
++	while ((skb = esfq_q_dequeue(q)) != NULL)
++		esfq_q_enqueue(skb, &new, ESFQ_TAIL);
++
++	/* clean up the old queue */
++	esfq_q_destroy(q);
++
++	/* copy elements of the new queue into the old queue */
++	q->perturb_period = new.perturb_period;
++	q->quantum        = new.quantum;
++	q->limit          = new.limit;
++	q->depth          = new.depth;
++	q->hash_divisor   = new.hash_divisor;
++	q->hash_kind      = new.hash_kind;
++	q->tail           = new.tail;
++	q->max_depth      = new.max_depth;
++	q->ht    = new.ht;
++	q->dep   = new.dep;
++	q->next  = new.next;
++	q->allot = new.allot;
++	q->hash  = new.hash;
++	q->qs    = new.qs;
++
++	/* finish up */
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	} else {
++		q->perturbation = 0;
++	}
++	sch_tree_unlock(sch);
++	return 0;
++}
++
++static int esfq_dump(struct Qdisc *sch, struct sk_buff *skb)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	unsigned char *b = skb_tail_pointer(skb);
++	struct tc_esfq_qopt opt;
++
++	opt.quantum = q->quantum;
++	opt.perturb_period = q->perturb_period/HZ;
++
++	opt.limit = q->limit;
++	opt.divisor = q->hash_divisor;
++	opt.flows = q->depth;
++	opt.hash_kind = q->hash_kind;
++
++	NLA_PUT(skb, TCA_OPTIONS, sizeof(opt), &opt);
++
++	return skb->len;
++
++nla_put_failure:
++	nlmsg_trim(skb, b);
++	return -1;
++}
++
++static struct Qdisc_ops esfq_qdisc_ops =
++{
++	.next		=	NULL,
++	.cl_ops		=	NULL,
++	.id		=	"esfq",
++	.priv_size	=	sizeof(struct esfq_sched_data),
++	.enqueue	=	esfq_enqueue,
++	.dequeue	=	esfq_dequeue,
++	.peek		=	esfq_peek,
++	.drop		=	esfq_drop,
++	.init		=	esfq_init,
++	.reset		=	esfq_reset,
++	.destroy	=	esfq_destroy,
++	.change		=	esfq_change,
++	.dump		=	esfq_dump,
++	.owner		=	THIS_MODULE,
++};
++
++static int __init esfq_module_init(void)
++{
++	return register_qdisc(&esfq_qdisc_ops);
++}
++static void __exit esfq_module_exit(void)
++{
++	unregister_qdisc(&esfq_qdisc_ops);
++}
++module_init(esfq_module_init)
++module_exit(esfq_module_exit)
++MODULE_LICENSE("GPL");

target/linux/generic/patches-3.1/621-sched_act_connmark.patch

@@ -0,0 +1,172 @@
+--- /dev/null
++++ b/net/sched/act_connmark.c
+@@ -0,0 +1,137 @@
++/*
++ * Copyright (c) 2011 Felix Fietkau <nbd@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms and conditions of the GNU General Public License,
++ * version 2, as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
++ * Place - Suite 330, Boston, MA 02111-1307 USA.
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/skbuff.h>
++#include <linux/rtnetlink.h>
++#include <linux/pkt_cls.h>
++#include <linux/ip.h>
++#include <linux/ipv6.h>
++#include <net/netlink.h>
++#include <net/pkt_sched.h>
++#include <net/act_api.h>
++
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_core.h>
++
++#define TCA_ACT_CONNMARK	20
++
++#define CONNMARK_TAB_MASK     3
++static struct tcf_common *tcf_connmark_ht[CONNMARK_TAB_MASK + 1];
++static u32 connmark_idx_gen;
++static DEFINE_RWLOCK(connmark_lock);
++
++static struct tcf_hashinfo connmark_hash_info = {
++	.htab	=	tcf_connmark_ht,
++	.hmask	=	CONNMARK_TAB_MASK,
++	.lock	=	&connmark_lock,
++};
++
++static int tcf_connmark(struct sk_buff *skb, struct tc_action *a,
++		       struct tcf_result *res)
++{
++	struct nf_conn *c;
++	enum ip_conntrack_info ctinfo;
++	int proto;
++	int r;
++
++	if (skb->protocol == htons(ETH_P_IP)) {
++		if (skb->len < sizeof(struct iphdr))
++			goto out;
++		proto = PF_INET;
++	} else if (skb->protocol == htons(ETH_P_IPV6)) {
++		if (skb->len < sizeof(struct ipv6hdr))
++			goto out;
++		proto = PF_INET6;
++	} else
++		goto out;
++
++	r = nf_conntrack_in(dev_net(skb->dev), proto, NF_INET_PRE_ROUTING, skb);
++	if (r != NF_ACCEPT)
++		goto out;
++
++	c = nf_ct_get(skb, &ctinfo);
++	if (!c)
++		goto out;
++
++	skb->mark = c->mark;
++	nf_conntrack_put(skb->nfct);
++	skb->nfct = NULL;
++
++out:
++	return TC_ACT_PIPE;
++}
++
++static int tcf_connmark_init(struct nlattr *nla, struct nlattr *est,
++			 struct tc_action *a, int ovr, int bind)
++{
++	struct tcf_common *pc;
++
++	pc = tcf_hash_create(0, est, a, sizeof(*pc), bind,
++			     &connmark_idx_gen, &connmark_hash_info);
++	if (IS_ERR(pc))
++	    return PTR_ERR(pc);
++
++	tcf_hash_insert(pc, &connmark_hash_info);
++
++	return ACT_P_CREATED;
++}
++
++static inline int tcf_connmark_cleanup(struct tc_action *a, int bind)
++{
++	if (a->priv)
++		return tcf_hash_release(a->priv, bind, &connmark_hash_info);
++	return 0;
++}
++
++static inline int tcf_connmark_dump(struct sk_buff *skb, struct tc_action *a,
++				int bind, int ref)
++{
++	return skb->len;
++}
++
++static struct tc_action_ops act_connmark_ops = {
++	.kind		=	"connmark",
++	.hinfo		=	&connmark_hash_info,
++	.type		=	TCA_ACT_CONNMARK,
++	.capab		=	TCA_CAP_NONE,
++	.owner		=	THIS_MODULE,
++	.act		=	tcf_connmark,
++	.dump		=	tcf_connmark_dump,
++	.cleanup	=	tcf_connmark_cleanup,
++	.init		=	tcf_connmark_init,
++	.walk		=	tcf_generic_walker,
++};
++
++MODULE_AUTHOR("Felix Fietkau <nbd@openwrt.org>");
++MODULE_DESCRIPTION("Connection tracking mark restoring");
++MODULE_LICENSE("GPL");
++
++static int __init connmark_init_module(void)
++{
++	return tcf_register_action(&act_connmark_ops);
++}
++
++static void __exit connmark_cleanup_module(void)
++{
++	tcf_unregister_action(&act_connmark_ops);
++}
++
++module_init(connmark_init_module);
++module_exit(connmark_cleanup_module);
+--- a/net/sched/Kconfig
++++ b/net/sched/Kconfig
+@@ -602,6 +602,19 @@ config NET_ACT_CSUM
+ 	  To compile this code as a module, choose M here: the
+ 	  module will be called act_csum.
+ 
++config NET_ACT_CONNMARK
++        tristate "Connection Tracking Marking"
++        depends on NET_CLS_ACT
++        depends on NF_CONNTRACK
++	 depends on NF_CONNTRACK_MARK
++        ---help---
++	  Say Y here to restore the connmark from a scheduler action
++
++	  If unsure, say N.
++
++	  To compile this code as a module, choose M here: the
++	  module will be called act_connmark.
++
+ config NET_CLS_IND
+ 	bool "Incoming device classification"
+ 	depends on NET_CLS_U32 || NET_CLS_FW
+--- a/net/sched/Makefile
++++ b/net/sched/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_NET_ACT_PEDIT)	+= act_pedit
+ obj-$(CONFIG_NET_ACT_SIMP)	+= act_simple.o
+ obj-$(CONFIG_NET_ACT_SKBEDIT)	+= act_skbedit.o
+ obj-$(CONFIG_NET_ACT_CSUM)	+= act_csum.o
++obj-$(CONFIG_NET_ACT_CONNMARK)	+= act_connmark.o
+ obj-$(CONFIG_NET_SCH_FIFO)	+= sch_fifo.o
+ obj-$(CONFIG_NET_SCH_CBQ)	+= sch_cbq.o
+ obj-$(CONFIG_NET_SCH_HTB)	+= sch_htb.o

target/linux/generic/patches-3.1/630-packet_socket_type.patch

@@ -0,0 +1,132 @@
+This patch allows the user to specify desired packet types (outgoing,
+broadcast, unicast, etc.) on packet sockets via setsockopt.
+This can reduce the load in situations where only a limited number
+of packet types are necessary
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+--- a/include/linux/if_packet.h
++++ b/include/linux/if_packet.h
+@@ -29,6 +29,8 @@ struct sockaddr_ll {
+ /* These ones are invisible by user level */
+ #define PACKET_LOOPBACK		5		/* MC/BRD frame looped back */
+ #define PACKET_FASTROUTE	6		/* Fastrouted frame	*/
++#define PACKET_MASK_ANY		0xffffffff	/* mask for packet type bits */
++
+ 
+ /* Packet socket options */
+ 
+@@ -50,6 +52,7 @@ struct sockaddr_ll {
+ #define PACKET_TX_TIMESTAMP		16
+ #define PACKET_TIMESTAMP		17
+ #define PACKET_FANOUT			18
++#define PACKET_RECV_TYPE		19
+ 
+ #define PACKET_FANOUT_HASH		0
+ #define PACKET_FANOUT_LB		1
+--- a/net/packet/af_packet.c
++++ b/net/packet/af_packet.c
+@@ -212,6 +212,7 @@ struct packet_sock {
+ 	unsigned int		tp_loss:1;
+ 	unsigned int		tp_tstamp;
+ 	struct packet_type	prot_hook ____cacheline_aligned_in_smp;
++	unsigned int		pkt_type;
+ };
+ 
+ #define PACKET_FANOUT_MAX	256
+@@ -661,6 +662,7 @@ static int packet_rcv_spkt(struct sk_buf
+ {
+ 	struct sock *sk;
+ 	struct sockaddr_pkt *spkt;
++	struct packet_sock *po;
+ 
+ 	/*
+ 	 *	When we registered the protocol we saved the socket in the data
+@@ -668,6 +670,7 @@ static int packet_rcv_spkt(struct sk_buf
+ 	 */
+ 
+ 	sk = pt->af_packet_priv;
++	po = pkt_sk(sk);
+ 
+ 	/*
+ 	 *	Yank back the headers [hope the device set this
+@@ -680,7 +683,7 @@ static int packet_rcv_spkt(struct sk_buf
+ 	 *	so that this procedure is noop.
+ 	 */
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
+ 		goto out;
+ 
+ 	if (!net_eq(dev_net(dev), sock_net(sk)))
+@@ -873,12 +876,12 @@ static int packet_rcv(struct sk_buff *sk
+ 	int skb_len = skb->len;
+ 	unsigned int snaplen, res;
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
+-		goto drop;
+-
+ 	sk = pt->af_packet_priv;
+ 	po = pkt_sk(sk);
+ 
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
++		goto drop;
++
+ 	if (!net_eq(dev_net(dev), sock_net(sk)))
+ 		goto drop;
+ 
+@@ -994,12 +997,12 @@ static int tpacket_rcv(struct sk_buff *s
+ 	struct timespec ts;
+ 	struct skb_shared_hwtstamps *shhwtstamps = skb_hwtstamps(skb);
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
+-		goto drop;
+-
+ 	sk = pt->af_packet_priv;
+ 	po = pkt_sk(sk);
+ 
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
++		goto drop;
++
+ 	if (!net_eq(dev_net(dev), sock_net(sk)))
+ 		goto drop;
+ 
+@@ -1826,6 +1829,7 @@ static int packet_create(struct net *net
+ 	spin_lock_init(&po->bind_lock);
+ 	mutex_init(&po->pg_vec_lock);
+ 	po->prot_hook.func = packet_rcv;
++	po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK);
+ 
+ 	if (sock->type == SOCK_PACKET)
+ 		po->prot_hook.func = packet_rcv_spkt;
+@@ -2410,6 +2414,16 @@ packet_setsockopt(struct socket *sock, i
+ 
+ 		return fanout_add(sk, val & 0xffff, val >> 16);
+ 	}
++        case PACKET_RECV_TYPE:
++        {
++                unsigned int val;
++                if (optlen != sizeof(val))
++                        return -EINVAL;
++                if (copy_from_user(&val, optval, sizeof(val)))
++                        return -EFAULT;
++                po->pkt_type = val & ~PACKET_LOOPBACK;
++                return 0;
++        }
+ 	default:
+ 		return -ENOPROTOOPT;
+ 	}
+@@ -2467,6 +2481,13 @@ static int packet_getsockopt(struct sock
+ 
+ 		data = &val;
+ 		break;
++	case PACKET_RECV_TYPE:
++		if (len > sizeof(unsigned int))
++			len = sizeof(unsigned int);
++		val = po->pkt_type;
++
++		data = &val;
++		break;
+ 	case PACKET_VERSION:
+ 		if (len > sizeof(int))
+ 			len = sizeof(int);

target/linux/generic/patches-3.1/640-bridge_no_eap_forward.patch

@@ -0,0 +1,15 @@
+--- a/net/bridge/br_input.c
++++ b/net/bridge/br_input.c
+@@ -77,7 +77,11 @@ int br_handle_frame_finish(struct sk_buf
+ 
+ 	dst = NULL;
+ 
+-	if (is_broadcast_ether_addr(dest))
++	if (skb->protocol == htons(ETH_P_PAE)) {
++		skb2 = skb;
++		/* Do not forward 802.1x/EAP frames */
++		skb = NULL;
++	} else if (is_broadcast_ether_addr(dest))
+ 		skb2 = skb;
+ 	else if (is_multicast_ether_addr(dest)) {
+ 		mdst = br_mdb_get(br, skb);

target/linux/generic/patches-3.1/641-bridge_always_accept_eap.patch

@@ -0,0 +1,11 @@
+--- a/net/bridge/br_input.c
++++ b/net/bridge/br_input.c
+@@ -64,7 +64,7 @@ int br_handle_frame_finish(struct sk_buf
+ 	    br_multicast_rcv(br, p, skb))
+ 		goto drop;
+ 
+-	if (p->state == BR_STATE_LEARNING)
++	if ((p->state == BR_STATE_LEARNING) && skb->protocol != htons(ETH_P_PAE))
+ 		goto drop;
+ 
+ 	BR_INPUT_SKB_CB(skb)->brdev = br->dev;

target/linux/generic/patches-3.1/642-bridge_port_isolate.patch

@@ -0,0 +1,103 @@
+--- a/net/bridge/br_private.h
++++ b/net/bridge/br_private.h
+@@ -134,6 +134,7 @@ struct net_bridge_port
+ 
+ 	unsigned long 			flags;
+ #define BR_HAIRPIN_MODE		0x00000001
++#define BR_ISOLATE_MODE		0x00000002
+ 
+ #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
+ 	u32				multicast_startup_queries_sent;
+--- a/net/bridge/br_sysfs_if.c
++++ b/net/bridge/br_sysfs_if.c
+@@ -149,6 +149,22 @@ static int store_hairpin_mode(struct net
+ static BRPORT_ATTR(hairpin_mode, S_IRUGO | S_IWUSR,
+ 		   show_hairpin_mode, store_hairpin_mode);
+ 
++static ssize_t show_isolate_mode(struct net_bridge_port *p, char *buf)
++{
++	int isolate_mode = (p->flags & BR_ISOLATE_MODE) ? 1 : 0;
++	return sprintf(buf, "%d\n", isolate_mode);
++}
++static ssize_t store_isolate_mode(struct net_bridge_port *p, unsigned long v)
++{
++	if (v)
++		p->flags |= BR_ISOLATE_MODE;
++	else
++		p->flags &= ~BR_ISOLATE_MODE;
++	return 0;
++}
++static BRPORT_ATTR(isolate_mode, S_IRUGO | S_IWUSR,
++		   show_isolate_mode, store_isolate_mode);
++
+ #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
+ static ssize_t show_multicast_router(struct net_bridge_port *p, char *buf)
+ {
+@@ -181,6 +197,7 @@ static struct brport_attribute *brport_a
+ 	&brport_attr_hold_timer,
+ 	&brport_attr_flush,
+ 	&brport_attr_hairpin_mode,
++	&brport_attr_isolate_mode,
+ #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
+ 	&brport_attr_multicast_router,
+ #endif
+--- a/net/bridge/br_input.c
++++ b/net/bridge/br_input.c
+@@ -97,7 +97,8 @@ int br_handle_frame_finish(struct sk_buf
+ 			skb2 = skb;
+ 
+ 		br->dev->stats.multicast++;
+-	} else if ((dst = __br_fdb_get(br, dest)) && dst->is_local) {
++	} else if ((p->flags & BR_ISOLATE_MODE) ||
++		   ((dst = __br_fdb_get(br, dest)) && dst->is_local)) {
+ 		skb2 = skb;
+ 		/* Do not forward the packet since it's local. */
+ 		skb = NULL;
+--- a/net/bridge/br_forward.c
++++ b/net/bridge/br_forward.c
+@@ -109,7 +109,7 @@ void br_deliver(const struct net_bridge_
+ /* called with rcu_read_lock */
+ void br_forward(const struct net_bridge_port *to, struct sk_buff *skb, struct sk_buff *skb0)
+ {
+-	if (should_deliver(to, skb)) {
++	if (should_deliver(to, skb) && !(to->flags & BR_ISOLATE_MODE)) {
+ 		if (skb0)
+ 			deliver_clone(to, skb, __br_forward);
+ 		else
+@@ -164,7 +164,8 @@ out:
+ static void br_flood(struct net_bridge *br, struct sk_buff *skb,
+ 		     struct sk_buff *skb0,
+ 		     void (*__packet_hook)(const struct net_bridge_port *p,
+-					   struct sk_buff *skb))
++					   struct sk_buff *skb),
++		     bool forward)
+ {
+ 	struct net_bridge_port *p;
+ 	struct net_bridge_port *prev;
+@@ -172,6 +173,9 @@ static void br_flood(struct net_bridge *
+ 	prev = NULL;
+ 
+ 	list_for_each_entry_rcu(p, &br->port_list, list) {
++		if (forward && (p->flags & BR_ISOLATE_MODE))
++			continue;
++
+ 		prev = maybe_deliver(prev, p, skb, __packet_hook);
+ 		if (IS_ERR(prev))
+ 			goto out;
+@@ -195,14 +199,14 @@ out:
+ /* called with rcu_read_lock */
+ void br_flood_deliver(struct net_bridge *br, struct sk_buff *skb)
+ {
+-	br_flood(br, skb, NULL, __br_deliver);
++	br_flood(br, skb, NULL, __br_deliver, false);
+ }
+ 
+ /* called under bridge lock */
+ void br_flood_forward(struct net_bridge *br, struct sk_buff *skb,
+ 		      struct sk_buff *skb2)
+ {
+-	br_flood(br, skb, skb2, __br_forward);
++	br_flood(br, skb, skb2, __br_forward, true);
+ }
+ 
+ #ifdef CONFIG_BRIDGE_IGMP_SNOOPING

target/linux/generic/patches-3.1/643-bridge_remove_ipv6_dependency.patch

@@ -0,0 +1,101 @@
+--- a/include/net/addrconf.h
++++ b/include/net/addrconf.h
+@@ -91,6 +91,12 @@ extern void			addrconf_join_solict(struc
+ extern void			addrconf_leave_solict(struct inet6_dev *idev,
+ 					const struct in6_addr *addr);
+ 
++extern int			(*ipv6_dev_get_saddr_hook)(struct net *net,
++						struct net_device *dev,
++						const struct in6_addr *daddr,
++						unsigned int srcprefs,
++						struct in6_addr *saddr);
++
+ static inline unsigned long addrconf_timeout_fixup(u32 timeout,
+ 						    unsigned unit)
+ {
+--- a/net/bridge/Kconfig
++++ b/net/bridge/Kconfig
+@@ -6,7 +6,6 @@ config BRIDGE
+ 	tristate "802.1d Ethernet Bridging"
+ 	select LLC
+ 	select STP
+-	depends on IPV6 || IPV6=n
+ 	---help---
+ 	  If you say Y here, then your Linux box will be able to act as an
+ 	  Ethernet bridge, which means that the different Ethernet segments it
+--- a/net/ipv6/Makefile
++++ b/net/ipv6/Makefile
+@@ -40,3 +40,4 @@ obj-$(CONFIG_IPV6_TUNNEL) += ip6_tunnel.
+ obj-y += addrconf_core.o exthdrs_core.o
+ 
+ obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_hashtables.o
++obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_stubs.o
+--- a/net/ipv6/addrconf.c
++++ b/net/ipv6/addrconf.c
+@@ -1106,7 +1106,7 @@ out:
+ 	return ret;
+ }
+ 
+-int ipv6_dev_get_saddr(struct net *net, struct net_device *dst_dev,
++static int __ipv6_dev_get_saddr(struct net *net, struct net_device *dst_dev,
+ 		       const struct in6_addr *daddr, unsigned int prefs,
+ 		       struct in6_addr *saddr)
+ {
+@@ -1231,7 +1231,6 @@ try_nextdev:
+ 	in6_ifa_put(hiscore->ifa);
+ 	return 0;
+ }
+-EXPORT_SYMBOL(ipv6_dev_get_saddr);
+ 
+ int ipv6_get_lladdr(struct net_device *dev, struct in6_addr *addr,
+ 		    unsigned char banned_flags)
+@@ -4748,6 +4747,9 @@ int __init addrconf_init(void)
+ 
+ 	ipv6_addr_label_rtnl_register();
+ 
++	BUG_ON(ipv6_dev_get_saddr_hook != NULL);
++	rcu_assign_pointer(ipv6_dev_get_saddr_hook, __ipv6_dev_get_saddr);
++
+ 	return 0;
+ errout:
+ 	rtnl_af_unregister(&inet6_ops);
+@@ -4766,6 +4768,9 @@ void addrconf_cleanup(void)
+ 	struct net_device *dev;
+ 	int i;
+ 
++	rcu_assign_pointer(ipv6_dev_get_saddr_hook, NULL);
++	synchronize_rcu();
++
+ 	unregister_netdevice_notifier(&ipv6_dev_notf);
+ 	unregister_pernet_subsys(&addrconf_ops);
+ 	ipv6_addr_label_cleanup();
+--- /dev/null
++++ b/net/ipv6/inet6_stubs.c
+@@ -0,0 +1,27 @@
++/*
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ */
++#include <net/ipv6.h>
++
++int (*ipv6_dev_get_saddr_hook)(struct net *net, struct net_device *dev,
++			const struct in6_addr *daddr, unsigned int srcprefs,
++			struct in6_addr *saddr);
++
++EXPORT_SYMBOL(ipv6_dev_get_saddr_hook);
++
++int ipv6_dev_get_saddr(struct net *net, struct net_device *dst_dev,
++			const struct in6_addr *daddr, unsigned int prefs,
++			struct in6_addr *saddr)
++{
++	typeof(ipv6_dev_get_saddr_hook) dev_get_saddr = rcu_dereference(ipv6_dev_get_saddr_hook);
++
++	if (dev_get_saddr)
++		return dev_get_saddr(net, dst_dev, daddr, prefs, saddr);
++
++	return -EADDRNOTAVAIL;
++}
++EXPORT_SYMBOL(ipv6_dev_get_saddr);
++

target/linux/generic/patches-3.1/650-pppoe_header_pad.patch

@@ -0,0 +1,20 @@
+--- a/drivers/net/pppoe.c
++++ b/drivers/net/pppoe.c
+@@ -856,7 +856,7 @@ static int pppoe_sendmsg(struct kiocb *i
+ 		goto end;
+ 
+ 
+-	skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32,
++	skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32 + NET_SKB_PAD,
+ 			   0, GFP_KERNEL);
+ 	if (!skb) {
+ 		error = -ENOMEM;
+@@ -864,7 +864,7 @@ static int pppoe_sendmsg(struct kiocb *i
+ 	}
+ 
+ 	/* Reserve space for headers. */
+-	skb_reserve(skb, dev->hard_header_len);
++	skb_reserve(skb, dev->hard_header_len + NET_SKB_PAD);
+ 	skb_reset_network_header(skb);
+ 
+ 	skb->dev = dev;

target/linux/generic/patches-3.1/651-wireless_mesh_header.patch

@@ -0,0 +1,11 @@
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -142,7 +142,7 @@ static inline bool dev_xmit_complete(int
+  */
+ 
+ #if defined(CONFIG_WLAN) || defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
+-# if defined(CONFIG_MAC80211_MESH)
++# if 1 || defined(CONFIG_MAC80211_MESH)
+ #  define LL_MAX_HEADER 128
+ # else
+ #  define LL_MAX_HEADER 96

target/linux/generic/patches-3.1/652-atm_header_changes.patch

@@ -0,0 +1,12 @@
+--- a/include/linux/atm.h
++++ b/include/linux/atm.h
+@@ -139,6 +139,9 @@ struct atm_trafprm {
+ 	int		min_pcr;	/* minimum PCR in cells per second */
+ 	int		max_cdv;	/* maximum CDV in microseconds */
+ 	int		max_sdu;	/* maximum SDU in bytes */
++	int		scr;		/* sustained rate in cells per second */
++	int		mbs;		/* maximum burst size (MBS) in cells */
++	int		cdv;		/* Cell delay varition */
+         /* extra params for ABR */
+         unsigned int 	icr;         	/* Initial Cell Rate (24-bit) */
+         unsigned int	tbe;		/* Transient Buffer Exposure (24-bit) */ 

target/linux/generic/patches-3.1/700-swconfig.patch

@@ -0,0 +1,25 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -13,6 +13,12 @@ menuconfig PHYLIB
+ 
+ if PHYLIB
+ 
++config SWCONFIG
++	tristate "Switch configuration API"
++	---help---
++	  Switch configuration API using netlink. This allows
++	  you to configure the VLAN features of certain switches.
++
+ comment "MII PHY device drivers"
+ 
+ config MARVELL_PHY
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -3,6 +3,7 @@
+ libphy-objs			:= phy.o phy_device.o mdio_bus.o
+ 
+ obj-$(CONFIG_PHYLIB)		+= libphy.o
++obj-$(CONFIG_SWCONFIG)		+= swconfig.o
+ obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
+ obj-$(CONFIG_DAVICOM_PHY)	+= davicom.o
+ obj-$(CONFIG_CICADA_PHY)	+= cicada.o

target/linux/generic/patches-3.1/701-phy_extension.patch

@@ -0,0 +1,72 @@
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -299,6 +299,50 @@ int phy_ethtool_gset(struct phy_device *
+ }
+ EXPORT_SYMBOL(phy_ethtool_gset);
+ 
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr)
++{
++	u32 cmd;
++	int tmp;
++	struct ethtool_cmd ecmd = { ETHTOOL_GSET };
++	struct ethtool_value edata = { ETHTOOL_GLINK };
++
++	if (get_user(cmd, (u32 *) useraddr))
++		return -EFAULT;
++
++	switch (cmd) {
++	case ETHTOOL_GSET:
++		phy_ethtool_gset(phydev, &ecmd);
++		if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
++			return -EFAULT;
++		return 0;
++
++	case ETHTOOL_SSET:
++		if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
++			return -EFAULT;
++		return phy_ethtool_sset(phydev, &ecmd);
++
++	case ETHTOOL_NWAY_RST:
++		/* if autoneg is off, it's an error */
++		tmp = phy_read(phydev, MII_BMCR);
++		if (tmp & BMCR_ANENABLE) {
++			tmp |= (BMCR_ANRESTART);
++			phy_write(phydev, MII_BMCR, tmp);
++			return 0;
++		}
++		return -EINVAL;
++
++	case ETHTOOL_GLINK:
++		edata.data = (phy_read(phydev,
++				MII_BMSR) & BMSR_LSTATUS) ? 1 : 0;
++		if (copy_to_user(useraddr, &edata, sizeof(edata)))
++			return -EFAULT;
++		return 0;
++	}
++
++	return -EOPNOTSUPP;
++}
++EXPORT_SYMBOL(phy_ethtool_ioctl);
++
+ /**
+  * phy_mii_ioctl - generic PHY MII ioctl interface
+  * @phydev: the phy_device struct
+@@ -474,7 +518,7 @@ static void phy_force_reduction(struct p
+ 	int idx;
+ 
+ 	idx = phy_find_setting(phydev->speed, phydev->duplex);
+-	
++
+ 	idx++;
+ 
+ 	idx = phy_find_valid(idx, phydev->supported);
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -510,6 +510,7 @@ void phy_start_machine(struct phy_device
+ void phy_stop_machine(struct phy_device *phydev);
+ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr);
+ int phy_mii_ioctl(struct phy_device *phydev,
+ 		struct ifreq *ifr, int cmd);
+ int phy_start_interrupts(struct phy_device *phydev);

target/linux/generic/patches-3.1/702-phy_add_aneg_done_function.patch

@@ -0,0 +1,45 @@
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -388,9 +388,18 @@ struct phy_driver {
+ 	 */
+ 	int (*config_aneg)(struct phy_device *phydev);
+ 
++	/* Determine if autonegotiation is done */
++	int (*aneg_done)(struct phy_device *phydev);
++
+ 	/* Determines the negotiated speed and duplex */
+ 	int (*read_status)(struct phy_device *phydev);
+ 
++	/* 
++	 * Update the value in phydev->link to reflect the 
++	 * current link value
++	 */
++	int (*update_link)(struct phy_device *phydev);
++
+ 	/* Clears any pending interrupts */
+ 	int (*ack_interrupt)(struct phy_device *phydev);
+ 
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -719,6 +719,9 @@ int genphy_update_link(struct phy_device
+ {
+ 	int status;
+ 
++	if (phydev->drv->update_link)
++		return phydev->drv->update_link(phydev);
++
+ 	/* Do a fake read */
+ 	status = phy_read(phydev, MII_BMSR);
+ 
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -106,6 +106,9 @@ static inline int phy_aneg_done(struct p
+ {
+ 	int retval;
+ 
++	if (phydev->drv->aneg_done)
++		return phydev->drv->aneg_done(phydev);
++
+ 	retval = phy_read(phydev, MII_BMSR);
+ 
+ 	return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);

target/linux/generic/patches-3.1/720-phy_adm6996.patch

@@ -0,0 +1,26 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -98,6 +98,13 @@ config MICREL_PHY
+ 	---help---
+ 	  Supports the KSZ9021, VSC8201, KS8001 PHYs.
+ 
++config ADM6996_PHY
++	tristate "Driver for ADM6996 switches"
++	select SWCONFIG
++	---help---
++	  Currently supports the ADM6996FC and ADM6996M switches.
++	  Support for FC is very limited.
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -14,6 +14,7 @@ obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
+ obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+ obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
++obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o

target/linux/generic/patches-3.1/721-phy_packets.patch

@@ -0,0 +1,63 @@
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -149,6 +149,18 @@ int phy_scan_fixups(struct phy_device *p
+ }
+ EXPORT_SYMBOL(phy_scan_fixups);
+ 
++static int generic_receive_skb(struct sk_buff *skb)
++{
++	skb->protocol = eth_type_trans(skb, skb->dev);
++	return netif_receive_skb(skb);
++}
++
++static int generic_rx(struct sk_buff *skb)
++{
++	skb->protocol = eth_type_trans(skb, skb->dev);
++	return netif_rx(skb);
++}
++
+ static struct phy_device* phy_device_create(struct mii_bus *bus,
+ 					    int addr, int phy_id)
+ {
+@@ -180,6 +192,8 @@ static struct phy_device* phy_device_cre
+ 	dev_set_name(&dev->dev, PHY_ID_FMT, bus->id, addr);
+ 
+ 	dev->state = PHY_DOWN;
++	dev->netif_receive_skb = &generic_receive_skb;
++	dev->netif_rx = &generic_rx;
+ 
+ 	mutex_init(&dev->lock);
+ 	INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -334,6 +334,20 @@ struct phy_device {
+ 	void (*adjust_link)(struct net_device *dev);
+ 
+ 	void (*adjust_state)(struct net_device *dev);
++
++	/*
++	 * By default these point to the original functions
++	 * with the same name. adding them to the phy_device
++	 * allows the phy driver to override them for packet
++	 * mangling if the ethernet driver supports it
++	 * This is required to support some really horrible
++	 * switches such as the Marvell 88E6060
++	 */
++	int (*netif_receive_skb)(struct sk_buff *skb);
++	int (*netif_rx)(struct sk_buff *skb);
++
++	/* alignment offset for packets */
++	int pkt_align;
+ };
+ #define to_phy_device(d) container_of(d, struct phy_device, dev)
+ 
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -1153,6 +1153,7 @@ struct net_device {
+ 	void			*ax25_ptr;	/* AX.25 specific data */
+ 	struct wireless_dev	*ieee80211_ptr;	/* IEEE 802.11 specific data,
+ 						   assign before registering */
++	void			*phy_ptr; /* PHY device specific data */
+ 
+ /*
+  * Cache lines mostly used on receive path (including eth_type_trans())

target/linux/generic/patches-3.1/722-phy_mvswitch.patch

@@ -0,0 +1,22 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -105,6 +105,9 @@ config ADM6996_PHY
+ 	  Currently supports the ADM6996FC and ADM6996M switches.
+ 	  Support for FC is very limited.
+ 
++config MVSWITCH_PHY
++	tristate "Driver for Marvell 88E6060 switches"
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -15,6 +15,7 @@ obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+ obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
+ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
++obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o

target/linux/generic/patches-3.1/723-phy_ip175c.patch

@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -108,6 +108,10 @@ config ADM6996_PHY
+ config MVSWITCH_PHY
+ 	tristate "Driver for Marvell 88E6060 switches"
+ 
++config IP17XX_PHY
++	tristate "Driver for IC+ IP17xx switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
+ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
++obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o

target/linux/generic/patches-3.1/724-phy_ar8216.patch

@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -112,6 +112,10 @@ config IP17XX_PHY
+ 	tristate "Driver for IC+ IP17xx switches"
+ 	select SWCONFIG
+ 
++config AR8216_PHY
++	tristate "Driver for Atheros AR8216 switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
++obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o

target/linux/generic/patches-3.1/725-phy_rtl8306.patch

@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -116,6 +116,10 @@ config AR8216_PHY
+ 	tristate "Driver for Atheros AR8216 switches"
+ 	select SWCONFIG
+ 
++config RTL8306_PHY
++	tristate "Driver for Realtek RTL8306S switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
++obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o

target/linux/generic/patches-3.1/726-phy_rtl8366.patch

@@ -0,0 +1,44 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -158,4 +158,29 @@ config MDIO_OCTEON
+ 
+ 	  If in doubt, say Y.
+ 
++config RTL8366_SMI
++	tristate "Driver for the RTL8366 SMI interface"
++	depends on GENERIC_GPIO
++	---help---
++	  This module implements the SMI interface protocol which is used
++	  by some RTL8366 ethernet switch devices via the generic GPIO API.
++
++if RTL8366_SMI
++
++config RTL8366S_PHY
++	tristate "Driver for the Realtek RTL8366S switch"
++	select SWCONFIG
++
++config RTL8366RB_PHY
++	tristate "Driver for the Realtek RTL8366RB switch"
++	select SWCONFIG
++
++config RTL8366S_PHY_DEBUG_FS
++	bool "RTL8366 switch driver DEBUG_FS support"
++	depends on RTL8366S_PHY || RTL8366RB_PHY
++	depends on DEBUG_FS
++	default n
++
++endif # RTL8366_SMI
++
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -20,6 +20,9 @@ obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
+ obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
++obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
++obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
++obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o

target/linux/generic/patches-3.1/750-hostap_txpower.patch

@@ -0,0 +1,154 @@
+--- a/drivers/net/wireless/hostap/hostap_ap.c
++++ b/drivers/net/wireless/hostap/hostap_ap.c
+@@ -2338,13 +2338,13 @@ int prism2_ap_get_sta_qual(local_info_t
+ 		addr[count].sa_family = ARPHRD_ETHER;
+ 		memcpy(addr[count].sa_data, sta->addr, ETH_ALEN);
+ 		if (sta->last_rx_silence == 0)
+-			qual[count].qual = sta->last_rx_signal < 27 ?
+-				0 : (sta->last_rx_signal - 27) * 92 / 127;
++                        qual[count].qual = (sta->last_rx_signal - 156) == 0 ?
++                                0 : (sta->last_rx_signal - 156) * 92 / 64;
+ 		else
+-			qual[count].qual = sta->last_rx_signal -
+-				sta->last_rx_silence - 35;
+-		qual[count].level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
+-		qual[count].noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
++                        qual[count].qual = (sta->last_rx_signal -
++                                sta->last_rx_silence) * 92 / 64;
++                qual[count].level = sta->last_rx_signal;
++                qual[count].noise = sta->last_rx_silence;
+ 		qual[count].updated = sta->last_rx_updated;
+ 
+ 		sta->last_rx_updated = IW_QUAL_DBM;
+@@ -2410,13 +2410,13 @@ int prism2_ap_translate_scan(struct net_
+ 		memset(&iwe, 0, sizeof(iwe));
+ 		iwe.cmd = IWEVQUAL;
+ 		if (sta->last_rx_silence == 0)
+-			iwe.u.qual.qual = sta->last_rx_signal < 27 ?
+-				0 : (sta->last_rx_signal - 27) * 92 / 127;
++	                iwe.u.qual.qual = (sta->last_rx_signal -156) == 0 ?
++	                        0 : (sta->last_rx_signal - 156) * 92 / 64;
+ 		else
+-			iwe.u.qual.qual = sta->last_rx_signal -
+-				sta->last_rx_silence - 35;
+-		iwe.u.qual.level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
+-		iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
++                        iwe.u.qual.qual = (sta->last_rx_signal -
++                                sta->last_rx_silence) * 92 / 64;
++                iwe.u.qual.level = sta->last_rx_signal;
++                iwe.u.qual.noise = sta->last_rx_silence;
+ 		iwe.u.qual.updated = sta->last_rx_updated;
+ 		iwe.len = IW_EV_QUAL_LEN;
+ 		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+--- a/drivers/net/wireless/hostap/hostap_config.h
++++ b/drivers/net/wireless/hostap/hostap_config.h
+@@ -45,4 +45,9 @@
+  */
+ /* #define PRISM2_NO_STATION_MODES */
+ 
++/* Enable TX power Setting functions
++ * (min att = -128 , max att =  127)
++ */
++#define RAW_TXPOWER_SETTING
++
+ #endif /* HOSTAP_CONFIG_H */
+--- a/drivers/net/wireless/hostap/hostap.h
++++ b/drivers/net/wireless/hostap/hostap.h
+@@ -90,6 +90,7 @@ extern const struct iw_handler_def hosta
+ extern const struct ethtool_ops prism2_ethtool_ops;
+ 
+ int hostap_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
++int hostap_restore_power(struct net_device *dev);
+ 
+ 
+ #endif /* HOSTAP_H */
+--- a/drivers/net/wireless/hostap/hostap_hw.c
++++ b/drivers/net/wireless/hostap/hostap_hw.c
+@@ -932,6 +932,7 @@ static int hfa384x_set_rid(struct net_de
+ 			prism2_hw_reset(dev);
+ 	}
+ 
++	hostap_restore_power(dev);
+ 	return res;
+ }
+ 
+--- a/drivers/net/wireless/hostap/hostap_info.c
++++ b/drivers/net/wireless/hostap/hostap_info.c
+@@ -433,6 +433,11 @@ static void handle_info_queue_linkstatus
+ 	}
+ 
+ 	/* Get BSSID if we have a valid AP address */
++
++	if ( val == HFA384X_LINKSTATUS_CONNECTED ||
++	     val == HFA384X_LINKSTATUS_DISCONNECTED )
++			hostap_restore_power(local->dev);
++
+ 	if (connected) {
+ 		netif_carrier_on(local->dev);
+ 		netif_carrier_on(local->ddev);
+--- a/drivers/net/wireless/hostap/hostap_ioctl.c
++++ b/drivers/net/wireless/hostap/hostap_ioctl.c
+@@ -1477,23 +1477,20 @@ static int prism2_txpower_hfa386x_to_dBm
+ 		val = 255;
+ 
+ 	tmp = val;
+-	tmp >>= 2;
+ 
+-	return -12 - tmp;
++	return tmp;
+ }
+ 
+ static u16 prism2_txpower_dBm_to_hfa386x(int val)
+ {
+ 	signed char tmp;
+ 
+-	if (val > 20)
+-		return 128;
+-	else if (val < -43)
++	if (val > 127)
+ 		return 127;
++	else if (val < -128)
++		return 128;
+ 
+ 	tmp = val;
+-	tmp = -12 - tmp;
+-	tmp <<= 2;
+ 
+ 	return (unsigned char) tmp;
+ }
+@@ -4056,3 +4053,35 @@ int hostap_ioctl(struct net_device *dev,
+ 
+ 	return ret;
+ }
++
++/* BUG FIX: Restore power setting value when lost due to F/W bug */
++
++int hostap_restore_power(struct net_device *dev)
++{
++        struct hostap_interface *iface = netdev_priv(dev);
++       local_info_t *local = iface->local;
++
++       u16 val;
++       int ret = 0;
++
++       if (local->txpower_type == PRISM2_TXPOWER_OFF) {
++                       val = 0xff; /* use all standby and sleep modes */
++                       ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
++                                              HFA386X_CR_A_D_TEST_MODES2,
++                                              &val, NULL);
++       }
++
++#ifdef RAW_TXPOWER_SETTING
++       if (local->txpower_type == PRISM2_TXPOWER_FIXED) {
++               val = HFA384X_TEST_CFG_BIT_ALC;
++               local->func->cmd(dev, HFA384X_CMDCODE_TEST |
++                                (HFA384X_TEST_CFG_BITS << 8), 0, &val, NULL);
++               val = prism2_txpower_dBm_to_hfa386x(local->txpower);
++               ret = (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
++                            HFA386X_CR_MANUAL_TX_POWER, &val, NULL));
++       }
++#endif /* RAW_TXPOWER_SETTING */
++       return (ret ? -EOPNOTSUPP : 0);
++}
++
++EXPORT_SYMBOL(hostap_restore_power);

target/linux/generic/patches-3.1/810-pci_disable_common_quirks.patch

@@ -0,0 +1,43 @@
+--- a/drivers/pci/Kconfig
++++ b/drivers/pci/Kconfig
+@@ -62,6 +62,12 @@ config XEN_PCIDEV_FE_DEBUG
+ 
+ 	  When in doubt, say N.
+ 
++config PCI_DISABLE_COMMON_QUIRKS
++	bool "PCI disable common quirks"
++	depends on PCI
++	help
++	  If you don't know what to do here, say N.
++
+ config HT_IRQ
+ 	bool "Interrupts on hypertransport devices"
+ 	default y
+--- a/drivers/pci/quirks.c
++++ b/drivers/pci/quirks.c
+@@ -104,6 +104,7 @@ static void __devinit quirk_mmio_always_
+ }
+ DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, quirk_mmio_always_on);
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /* The Mellanox Tavor device gives false positive parity errors
+  * Mark this device with a broken_parity_status, to allow
+  * PCI scanning code to "skip" this now blacklisted device.
+@@ -1989,7 +1990,9 @@ static void __devinit fixup_rev1_53c810(
+ 	}
+ }
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /* Enable 1k I/O space granularity on the Intel P64H2 */
+ static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
+ {
+@@ -2665,6 +2668,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT
+ 			quirk_msi_intx_disable_bug);
+ 
+ #endif /* CONFIG_PCI_MSI */
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+ 
+ /* Allow manual resource allocation for PCI hotplug bridges
+  * via pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For

target/linux/generic/patches-3.1/811-pci_disable_usb_common_quirks.patch

@@ -0,0 +1,18 @@
+
+--- a/drivers/usb/host/pci-quirks.c
++++ b/drivers/usb/host/pci-quirks.c
+@@ -429,6 +429,8 @@ reset_needed:
+ }
+ EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
++
+ static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
+ {
+ 	u16 cmd;
+@@ -883,3 +885,5 @@ static void __devinit quirk_usb_early_ha
+ 		quirk_usb_handoff_xhci(pdev);
+ }
+ DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
++
++#endif

target/linux/generic/patches-3.1/820-usb_add_usb_find_device_by_name.patch

@@ -0,0 +1,84 @@
+--- a/drivers/usb/core/usb.c
++++ b/drivers/usb/core/usb.c
+@@ -651,6 +651,71 @@ int __usb_get_extra_descriptor(char *buf
+ }
+ EXPORT_SYMBOL_GPL(__usb_get_extra_descriptor);
+ 
++static struct usb_device *match_device_name(struct usb_device *dev,
++					    const char *name)
++{
++	struct usb_device *ret_dev = NULL;
++	int child;
++
++	dev_dbg(&dev->dev, "check for name %s ...\n", name);
++
++	/* see if this device matches */
++	if (strcmp(dev_name(&dev->dev), name) == 0 ) {
++		dev_dbg(&dev->dev, "matched this device!\n");
++		ret_dev = usb_get_dev(dev);
++		goto exit;
++	}
++
++	/* look through all of the children of this device */
++	for (child = 0; child < dev->maxchild; ++child) {
++		if (dev->children[child]) {
++			usb_lock_device(dev->children[child]);
++			ret_dev = match_device_name(dev->children[child], name);
++			usb_unlock_device(dev->children[child]);
++			if (ret_dev)
++				goto exit;
++		}
++	}
++exit:
++	return ret_dev;
++}
++
++/**
++ * usb_find_device_by_name - find a specific usb device in the system
++ * @name: the name of the device to find
++ *
++ * Returns a pointer to a struct usb_device if such a specified usb
++ * device is present in the system currently.  The usage count of the
++ * device will be incremented if a device is found.  Make sure to call
++ * usb_put_dev() when the caller is finished with the device.
++ *
++ * If a device with the specified bus id is not found, NULL is returned.
++ */
++struct usb_device *usb_find_device_by_name(const char *name)
++{
++	struct list_head *buslist;
++	struct usb_bus *bus;
++	struct usb_device *dev = NULL;
++
++	mutex_lock(&usb_bus_list_lock);
++	for (buslist = usb_bus_list.next;
++	     buslist != &usb_bus_list;
++	     buslist = buslist->next) {
++		bus = container_of(buslist, struct usb_bus, bus_list);
++		if (!bus->root_hub)
++			continue;
++		usb_lock_device(bus->root_hub);
++		dev = match_device_name(bus->root_hub, name);
++		usb_unlock_device(bus->root_hub);
++		if (dev)
++			goto exit;
++	}
++exit:
++	mutex_unlock(&usb_bus_list_lock);
++	return dev;
++}
++EXPORT_SYMBOL_GPL(usb_find_device_by_name);
++
+ /**
+  * usb_alloc_coherent - allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP
+  * @dev: device the buffer will be used with
+--- a/include/linux/usb.h
++++ b/include/linux/usb.h
+@@ -513,6 +513,7 @@ extern int usb_lock_device_for_reset(str
+ extern int usb_reset_device(struct usb_device *dev);
+ extern void usb_queue_reset_device(struct usb_interface *dev);
+ 
++extern struct usb_device *usb_find_device_by_name(const char *name);
+ 
+ /* USB autosuspend and autoresume */
+ #ifdef CONFIG_USB_SUSPEND

target/linux/generic/patches-3.1/830-ledtrig_morse.patch

@@ -0,0 +1,18 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -453,4 +453,8 @@ config LEDS_TRIGGER_DEFAULT_ON
+ comment "iptables trigger is under Netfilter config (LED target)"
+ 	depends on LEDS_TRIGGERS
+ 
++config LEDS_TRIGGER_MORSE
++	tristate "LED Morse Trigger"
++	depends on LEDS_TRIGGERS
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -54,3 +54,4 @@ obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+=
+ obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+= ledtrig-backlight.o
+ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
+ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
++obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o

target/linux/generic/patches-3.1/831-ledtrig_netdev.patch

@@ -0,0 +1,43 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -457,4 +457,11 @@ config LEDS_TRIGGER_MORSE
+ 	tristate "LED Morse Trigger"
+ 	depends on LEDS_TRIGGERS
+ 
++config LEDS_TRIGGER_NETDEV
++	tristate "LED Netdev Trigger"
++	depends on NET && LEDS_TRIGGERS
++	help
++	  This allows LEDs to be controlled by network device activity.
++	  If unsure, say Y.
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -55,3 +55,4 @@ obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+=
+ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
+ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
+ obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
++obj-$(CONFIG_LEDS_TRIGGER_NETDEV)	+= ledtrig-netdev.o
+--- a/drivers/leds/ledtrig-netdev.c
++++ b/drivers/leds/ledtrig-netdev.c
+@@ -307,8 +307,9 @@ done:
+ static void netdev_trig_timer(unsigned long arg)
+ {
+ 	struct led_netdev_data *trigger_data = (struct led_netdev_data *)arg;
+-	const struct net_device_stats *dev_stats;
++	struct rtnl_link_stats64 *dev_stats;
+ 	unsigned new_activity;
++	struct rtnl_link_stats64 temp;
+ 
+ 	write_lock(&trigger_data->lock);
+ 
+@@ -318,7 +319,7 @@ static void netdev_trig_timer(unsigned l
+ 		goto no_restart;
+ 	}
+ 
+-	dev_stats = dev_get_stats(trigger_data->net_dev);
++	dev_stats = dev_get_stats(trigger_data->net_dev, &temp);
+ 	new_activity =
+ 		((trigger_data->mode & MODE_TX) ? dev_stats->tx_packets : 0) +
+ 		((trigger_data->mode & MODE_RX) ? dev_stats->rx_packets : 0);

target/linux/generic/patches-3.1/832-ledtrig_usbdev.patch

@@ -0,0 +1,21 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -464,4 +464,11 @@ config LEDS_TRIGGER_NETDEV
+ 	  This allows LEDs to be controlled by network device activity.
+ 	  If unsure, say Y.
+ 
++config LEDS_TRIGGER_USBDEV
++	tristate "LED USB device Trigger"
++	depends on USB && LEDS_TRIGGERS
++	help
++	  This allows LEDs to be controlled by the presence/activity of
++	  an USB device. If unsure, say N.
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -56,3 +56,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledt
+ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
+ obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
+ obj-$(CONFIG_LEDS_TRIGGER_NETDEV)	+= ledtrig-netdev.o
++obj-$(CONFIG_LEDS_TRIGGER_USBDEV)	+= ledtrig-usbdev.o

target/linux/generic/patches-3.1/833-gpio_buttons.patch

@@ -0,0 +1,30 @@
+--- a/drivers/input/misc/Kconfig
++++ b/drivers/input/misc/Kconfig
+@@ -527,4 +527,20 @@ config INPUT_XEN_KBDDEV_FRONTEND
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called xen-kbdfront.
+ 
++config INPUT_GPIO_BUTTONS
++	tristate "Polled GPIO buttons interface"
++	depends on GENERIC_GPIO
++	select INPUT_POLLDEV
++	help
++	  This driver implements support for buttons connected
++	  to GPIO pins of various CPUs (and some other chips).
++
++	  Say Y here if your device has buttons connected
++	  directly to such GPIO pins.  Your board-specific
++	  setup logic must also provide a platform device,
++	  with configuration data saying which GPIOs are used.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called gpio-buttons.
++
+ endif
+--- a/drivers/input/misc/Makefile
++++ b/drivers/input/misc/Makefile
+@@ -49,3 +49,4 @@ obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wist
+ obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
+ obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND)	+= xen-kbdfront.o
+ obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
++obj-$(CONFIG_INPUT_GPIO_BUTTONS)	+= gpio_buttons.o

target/linux/generic/patches-3.1/835-gpiodev.patch

@@ -0,0 +1,27 @@
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
+@@ -511,6 +511,14 @@ config NSC_GPIO
+ 	  pc8736x_gpio drivers.  If those drivers are built as
+ 	  modules, this one will be too, named nsc_gpio
+ 
++config GPIO_DEVICE
++	tristate "GPIO device support"
++	depends on GENERIC_GPIO
++	help
++	  Say Y to enable Linux GPIO device support.  This allows control of
++	  GPIO pins using a character device
++
++
+ config RAW_DRIVER
+ 	tristate "RAW driver (/dev/raw/rawN)"
+ 	depends on BLOCK
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
+@@ -47,6 +47,7 @@ obj-$(CONFIG_NWFLASH)		+= nwflash.o
+ obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio.o
+ obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
+ obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o
++obj-$(CONFIG_GPIO_DEVICE)	+= gpio_dev.o
+ obj-$(CONFIG_GPIO_TB0219)	+= tb0219.o
+ obj-$(CONFIG_TELCLOCK)		+= tlclk.o
+ 

target/linux/generic/patches-3.1/840-rtc7301.patch

@@ -0,0 +1,250 @@
+--- a/drivers/rtc/Kconfig
++++ b/drivers/rtc/Kconfig
+@@ -719,6 +719,15 @@ config RTC_DRV_NUC900
+ 	  If you say yes here you get support for the RTC subsystem of the
+ 	  NUC910/NUC920 used in embedded systems.
+ 
++config RTC_DRV_RTC7301
++	tristate "Epson RTC-7301 SF/DG"
++	help
++	  If you say Y here you will get support for the
++	  Epson RTC-7301 SF/DG RTC chips.
++
++	  This driver can also be built as a module. If so, the module
++	  will be called rtc-7301.
++
+ comment "on-CPU RTC drivers"
+ 
+ config RTC_DRV_DAVINCI
+--- a/drivers/rtc/Makefile
++++ b/drivers/rtc/Makefile
+@@ -86,6 +86,7 @@ obj-$(CONFIG_RTC_DRV_RP5C01)	+= rtc-rp5c
+ obj-$(CONFIG_RTC_DRV_RS5C313)	+= rtc-rs5c313.o
+ obj-$(CONFIG_RTC_DRV_RS5C348)	+= rtc-rs5c348.o
+ obj-$(CONFIG_RTC_DRV_RS5C372)	+= rtc-rs5c372.o
++obj-$(CONFIG_RTC_DRV_RTC7301)	+= rtc-rtc7301.o
+ obj-$(CONFIG_RTC_DRV_RV3029C2)	+= rtc-rv3029c2.o
+ obj-$(CONFIG_RTC_DRV_RX8025)	+= rtc-rx8025.o
+ obj-$(CONFIG_RTC_DRV_RX8581)	+= rtc-rx8581.o
+--- /dev/null
++++ b/drivers/rtc/rtc-rtc7301.c
+@@ -0,0 +1,219 @@
++/*
++ * Driver for Epson RTC-7301SF/DG
++ *
++ * Copyright (C) 2009 Jose Vasconcellos
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/rtc.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/delay.h>
++#include <linux/bcd.h>
++
++#define RTC_NAME "rtc7301"
++#define RTC_VERSION "0.1"
++
++/* Epson RTC-7301 register addresses */
++#define RTC7301_SEC		0x00
++#define RTC7301_SEC10		0x01
++#define RTC7301_MIN		0x02
++#define RTC7301_MIN10		0x03
++#define RTC7301_HOUR		0x04
++#define RTC7301_HOUR10		0x05
++#define RTC7301_WEEKDAY		0x06
++#define RTC7301_DAY		0x07
++#define RTC7301_DAY10		0x08
++#define RTC7301_MON		0x09
++#define RTC7301_MON10		0x0A
++#define RTC7301_YEAR		0x0B
++#define RTC7301_YEAR10		0x0C
++#define RTC7301_YEAR100		0x0D
++#define RTC7301_YEAR1000	0x0E
++#define RTC7301_CTRLREG		0x0F
++
++static uint8_t __iomem *rtc7301_base;
++
++#define read_reg(offset) (readb(rtc7301_base + offset) & 0xf)
++#define write_reg(offset, data) writeb(data, rtc7301_base + (offset))
++
++#define rtc7301_isbusy() (read_reg(RTC7301_CTRLREG) & 1)
++
++static void rtc7301_init_settings(void)
++{
++	int i;
++
++	write_reg(RTC7301_CTRLREG, 2);
++	write_reg(RTC7301_YEAR1000, 2);
++	udelay(122);
++
++	/* bank 1 */
++	write_reg(RTC7301_CTRLREG, 6);
++	for (i=0; i<15; i++)
++		write_reg(i, 0);
++
++	/* bank 2 */
++	write_reg(RTC7301_CTRLREG, 14);
++	for (i=0; i<15; i++)
++		write_reg(i, 0);
++	write_reg(RTC7301_CTRLREG, 0);
++}
++
++static int rtc7301_get_datetime(struct device *dev, struct rtc_time *dt)
++{
++	int cnt;
++	uint8_t buf[16];
++
++	cnt = 0;
++	while (rtc7301_isbusy()) {
++		udelay(244);
++		if (cnt++ > 100) {
++			dev_err(dev, "%s: timeout error %x\n", __func__, rtc7301_base[RTC7301_CTRLREG]);
++			return -EIO;
++		}
++	}
++
++	for (cnt=0; cnt<16; cnt++)
++		buf[cnt] = read_reg(cnt);
++
++	if (buf[RTC7301_SEC10] & 8) {
++		dev_err(dev, "%s: RTC not set\n", __func__);
++		return -EINVAL;
++	}
++
++	memset(dt, 0, sizeof(*dt));
++
++	dt->tm_sec =  buf[RTC7301_SEC] + buf[RTC7301_SEC10]*10;
++	dt->tm_min =  buf[RTC7301_MIN] + buf[RTC7301_MIN10]*10;
++	dt->tm_hour = buf[RTC7301_HOUR] + buf[RTC7301_HOUR10]*10;
++
++	dt->tm_mday = buf[RTC7301_DAY] + buf[RTC7301_DAY10]*10;
++	dt->tm_mon =  buf[RTC7301_MON] + buf[RTC7301_MON10]*10 - 1;
++	dt->tm_year = buf[RTC7301_YEAR] + buf[RTC7301_YEAR10]*10 +
++		      buf[RTC7301_YEAR100]*100 +
++		      ((buf[RTC7301_YEAR1000] & 3)*1000) - 1900;
++
++	/* the rtc device may contain illegal values on power up
++	 * according to the data sheet. make sure they are valid.
++	 */
++
++	return rtc_valid_tm(dt);
++}
++
++static int rtc7301_set_datetime(struct device *dev, struct rtc_time *dt)
++{
++	int data;
++
++	data = dt->tm_year + 1900;
++	if (data >= 2100 || data < 1900)
++		return -EINVAL;
++
++	write_reg(RTC7301_CTRLREG, 2);
++       	udelay(122);
++
++	data = bin2bcd(dt->tm_sec);
++	write_reg(RTC7301_SEC, data);
++	write_reg(RTC7301_SEC10, (data >> 4));
++
++	data = bin2bcd(dt->tm_min);
++	write_reg(RTC7301_MIN, data );
++	write_reg(RTC7301_MIN10, (data >> 4));
++
++	data = bin2bcd(dt->tm_hour);
++	write_reg(RTC7301_HOUR, data);
++	write_reg(RTC7301_HOUR10, (data >> 4));
++
++	data = bin2bcd(dt->tm_mday);
++	write_reg(RTC7301_DAY, data);
++	write_reg(RTC7301_DAY10, (data>> 4));
++
++	data = bin2bcd(dt->tm_mon + 1);
++	write_reg(RTC7301_MON, data);
++	write_reg(RTC7301_MON10, (data >> 4));
++
++	data = bin2bcd(dt->tm_year % 100);
++	write_reg(RTC7301_YEAR, data);
++	write_reg(RTC7301_YEAR10, (data >> 4));
++	data = bin2bcd((1900 + dt->tm_year) / 100);
++	write_reg(RTC7301_YEAR100, data);
++
++	data = bin2bcd(dt->tm_wday);
++	write_reg(RTC7301_WEEKDAY, data);
++
++	write_reg(RTC7301_CTRLREG, 0);
++
++	return 0;
++}
++
++static const struct rtc_class_ops rtc7301_rtc_ops = {
++	.read_time	= rtc7301_get_datetime,
++	.set_time	= rtc7301_set_datetime,
++};
++
++static int __devinit rtc7301_probe(struct platform_device *pdev)
++{
++	struct rtc_device *rtc;
++	struct resource *res;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res)
++		return -ENOENT;
++
++	rtc7301_base = ioremap_nocache(res->start, 0x1000 /*res->end - res->start + 1*/);
++	if (!rtc7301_base)
++		return -EINVAL;
++
++	rtc = rtc_device_register(RTC_NAME, &pdev->dev,
++				&rtc7301_rtc_ops, THIS_MODULE);
++	if (IS_ERR(rtc)) {
++		iounmap(rtc7301_base);
++		return PTR_ERR(rtc);
++	}
++
++	platform_set_drvdata(pdev, rtc);
++
++	rtc7301_init_settings();
++	return 0;
++}
++
++static int __devexit rtc7301_remove(struct platform_device *pdev)
++{
++	struct rtc_device *rtc = platform_get_drvdata(pdev);
++
++	if (rtc)
++		rtc_device_unregister(rtc);
++	if (rtc7301_base)
++		iounmap(rtc7301_base);
++	return 0;
++}
++
++static struct platform_driver rtc7301_driver = {
++	.driver = {
++		.name	= RTC_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe	= rtc7301_probe,
++	.remove = __devexit_p(rtc7301_remove),
++};
++
++static __init int rtc7301_init(void)
++{
++	return platform_driver_register(&rtc7301_driver);
++}
++module_init(rtc7301_init);
++
++static __exit void rtc7301_exit(void)
++{
++	platform_driver_unregister(&rtc7301_driver);
++}
++module_exit(rtc7301_exit);
++
++MODULE_DESCRIPTION("Epson 7301 RTC driver");
++MODULE_AUTHOR("Jose Vasconcellos <jvasco@verizon.net>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:" RTC_NAME);
++MODULE_VERSION(RTC_VERSION);

target/linux/generic/patches-3.1/850-glamo_headers.patch

@@ -0,0 +1,21 @@
+--- a/include/linux/fb.h
++++ b/include/linux/fb.h
+@@ -125,6 +125,7 @@
+ #define FB_ACCEL_TRIDENT_BLADE3D 52	/* Trident Blade3D		*/
+ #define FB_ACCEL_TRIDENT_BLADEXP 53	/* Trident BladeXP		*/
+ #define FB_ACCEL_CIRRUS_ALPINE   53	/* Cirrus Logic 543x/544x/5480	*/
++#define FB_ACCEL_GLAMO		50	/* SMedia Glamo                 */
+ #define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
+ #define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
+ #define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
+--- a/include/linux/Kbuild
++++ b/include/linux/Kbuild
+@@ -144,6 +144,8 @@ header-y += generic_serial.h
+ header-y += genetlink.h
+ header-y += gfs2_ondisk.h
+ header-y += gigaset_dev.h
++header-y += glamofb.h
++header-y += glamo-engine.h
+ header-y += hdlc.h
+ header-y += hdlcdrv.h
+ header-y += hdreg.h

target/linux/generic/patches-3.1/860-01_hotpluggable_spi_gpio.patch

@@ -0,0 +1,60 @@
+Fix spi-gpio for hotplug.
+
+--mb
+
+
+
+--- a/drivers/spi/spi-gpio.c
++++ b/drivers/spi/spi-gpio.c
+@@ -255,7 +255,7 @@ static void spi_gpio_cleanup(struct spi_
+ 	spi_bitbang_cleanup(spi);
+ }
+ 
+-static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
++static int __devinit spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
+ {
+ 	int value;
+ 
+@@ -269,7 +269,7 @@ static int __init spi_gpio_alloc(unsigne
+ 	return value;
+ }
+ 
+-static int __init
++static int __devinit
+ spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label,
+ 	u16 *res_flags)
+ {
+@@ -311,7 +311,7 @@ done:
+ 	return value;
+ }
+ 
+-static int __init spi_gpio_probe(struct platform_device *pdev)
++static int __devinit spi_gpio_probe(struct platform_device *pdev)
+ {
+ 	int				status;
+ 	struct spi_master		*master;
+@@ -379,7 +379,7 @@ gpio_free:
+ 	return status;
+ }
+ 
+-static int __exit spi_gpio_remove(struct platform_device *pdev)
++static int __devexit spi_gpio_remove(struct platform_device *pdev)
+ {
+ 	struct spi_gpio			*spi_gpio;
+ 	struct spi_gpio_platform_data	*pdata;
+@@ -408,12 +408,13 @@ MODULE_ALIAS("platform:" DRIVER_NAME);
+ static struct platform_driver spi_gpio_driver = {
+ 	.driver.name	= DRIVER_NAME,
+ 	.driver.owner	= THIS_MODULE,
+-	.remove		= __exit_p(spi_gpio_remove),
++	.probe		= spi_gpio_probe,
++	.remove		= __devexit_p(spi_gpio_remove),
+ };
+ 
+ static int __init spi_gpio_init(void)
+ {
+-	return platform_driver_probe(&spi_gpio_driver, spi_gpio_probe);
++	return platform_driver_register(&spi_gpio_driver);
+ }
+ module_init(spi_gpio_init);
+ 

target/linux/generic/patches-3.1/861-04_spi_gpio_implement_spi_delay.patch

@@ -0,0 +1,58 @@
+Implement the SPI-GPIO delay function for busses that need speed limitation.
+
+--mb
+
+
+
+--- a/drivers/spi/spi-gpio.c
++++ b/drivers/spi/spi-gpio.c
+@@ -21,6 +21,7 @@
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/gpio.h>
++#include <linux/delay.h>
+ 
+ #include <linux/spi/spi.h>
+ #include <linux/spi/spi_bitbang.h>
+@@ -69,6 +70,7 @@ struct spi_gpio {
+  *		#define	SPI_MOSI_GPIO	120
+  *		#define	SPI_SCK_GPIO	121
+  *		#define	SPI_N_CHIPSEL	4
++ *		#undef NEED_SPIDELAY
+  *		#include "spi-gpio.c"
+  */
+ 
+@@ -76,6 +78,7 @@ struct spi_gpio {
+ #define DRIVER_NAME	"spi_gpio"
+ 
+ #define GENERIC_BITBANG	/* vs tight inlines */
++#define NEED_SPIDELAY	1
+ 
+ /* all functions referencing these symbols must define pdata */
+ #define SPI_MISO_GPIO	((pdata)->miso)
+@@ -120,12 +123,20 @@ static inline int getmiso(const struct s
+ #undef pdata
+ 
+ /*
+- * NOTE:  this clocks "as fast as we can".  It "should" be a function of the
+- * requested device clock.  Software overhead means we usually have trouble
+- * reaching even one Mbit/sec (except when we can inline bitops), so for now
+- * we'll just assume we never need additional per-bit slowdowns.
++ * NOTE:  to clock "as fast as we can", set spi_device.max_speed_hz
++ * and spi_transfer.speed_hz to 0.
++ * Otherwise this is a function of the requested device clock.
++ * Software overhead means we usually have trouble
++ * reaching even one Mbit/sec (except when we can inline bitops). So on small
++ * embedded devices with fast SPI slaves you usually don't need a delay.
+  */
+-#define spidelay(nsecs)	do {} while (0)
++static inline void spidelay(unsigned nsecs)
++{
++#ifdef NEED_SPIDELAY
++	if (unlikely(nsecs))
++		ndelay(nsecs);
++#endif /* NEED_SPIDELAY */
++}
+ 
+ #include "spi-bitbang-txrx.h"
+ 

target/linux/generic/patches-3.1/862-gpio_spi_driver.patch

@@ -0,0 +1,373 @@
+THIS CODE IS DEPRECATED.
+
+Please use the new mainline SPI-GPIO driver, as of 2.6.29.
+
+--mb
+
+
+
+---
+ drivers/spi/Kconfig              |    9 +
+ drivers/spi/Makefile             |    1 
+ drivers/spi/spi_gpio_old.c       |  251 +++++++++++++++++++++++++++++++++++++++
+ include/linux/spi/spi_gpio_old.h |   73 +++++++++++
+ 4 files changed, 334 insertions(+)
+
+--- /dev/null
++++ b/include/linux/spi/spi_gpio_old.h
+@@ -0,0 +1,73 @@
++/*
++ * spi_gpio interface to platform code
++ *
++ * Copyright (c) 2008 Piotr Skamruk
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef _LINUX_SPI_SPI_GPIO
++#define _LINUX_SPI_SPI_GPIO
++
++#include <linux/types.h>
++#include <linux/spi/spi.h>
++
++
++/**
++ * struct spi_gpio_platform_data - Data definitions for a SPI-GPIO device.
++ *
++ * This structure holds information about a GPIO-based SPI device.
++ *
++ * @pin_clk: The GPIO pin number of the CLOCK pin.
++ *
++ * @pin_miso: The GPIO pin number of the MISO pin.
++ *
++ * @pin_mosi: The GPIO pin number of the MOSI pin.
++ *
++ * @pin_cs: The GPIO pin number of the CHIPSELECT pin.
++ *
++ * @cs_activelow: If true, the chip is selected when the CS line is low.
++ *
++ * @no_spi_delay: If true, no delay is done in the lowlevel bitbanging.
++ *                Note that doing no delay is not standards compliant,
++ *                but it might be needed to speed up transfers on some
++ *                slow embedded machines.
++ *
++ * @boardinfo_setup: This callback is called after the
++ *                   SPI master device was registered, but before the
++ *                   device is registered.
++ * @boardinfo_setup_data: Data argument passed to boardinfo_setup().
++ */
++struct spi_gpio_platform_data {
++	unsigned int pin_clk;
++	unsigned int pin_miso;
++	unsigned int pin_mosi;
++	unsigned int pin_cs;
++	bool cs_activelow;
++	bool no_spi_delay;
++	int (*boardinfo_setup)(struct spi_board_info *bi,
++			       struct spi_master *master,
++			       void *data);
++	void *boardinfo_setup_data;
++};
++
++/**
++ * SPI_GPIO_PLATDEV_NAME - The platform device name string.
++ *
++ * The name string that has to be used for platform_device_alloc
++ * when allocating a spi-gpio device.
++ */
++#define SPI_GPIO_PLATDEV_NAME	"spi-gpio"
++
++/**
++ * spi_gpio_next_id - Get another platform device ID number.
++ *
++ * This returns the next platform device ID number that has to be used
++ * for platform_device_alloc. The ID is opaque and should not be used for
++ * anything else.
++ */
++int spi_gpio_next_id(void);
++
++#endif /* _LINUX_SPI_SPI_GPIO */
+--- /dev/null
++++ b/drivers/spi/spi_gpio_old.c
+@@ -0,0 +1,251 @@
++/*
++ * Bitbanging SPI bus driver using GPIO API
++ *
++ * Copyright (c) 2008 Piotr Skamruk
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * based on spi_s3c2410_gpio.c
++ *   Copyright (c) 2006 Ben Dooks
++ *   Copyright (c) 2006 Simtec Electronics
++ * and on i2c-gpio.c
++ *   Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/spi/spi_gpio_old.h>
++#include <linux/gpio.h>
++#include <asm/atomic.h>
++
++
++struct spi_gpio {
++	struct spi_bitbang bitbang;
++	struct spi_gpio_platform_data *info;
++	struct platform_device *pdev;
++	struct spi_board_info bi;
++};
++
++
++static inline struct spi_gpio *spidev_to_sg(struct spi_device *dev)
++{
++	return dev->controller_data;
++}
++
++static inline void setsck(struct spi_device *dev, int val)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	gpio_set_value(sp->info->pin_clk, val ? 1 : 0);
++}
++
++static inline void setmosi(struct spi_device *dev, int val)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	gpio_set_value(sp->info->pin_mosi, val ? 1 : 0);
++}
++
++static inline u32 getmiso(struct spi_device *dev)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	return gpio_get_value(sp->info->pin_miso) ? 1 : 0;
++}
++
++static inline void do_spidelay(struct spi_device *dev, unsigned nsecs)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++
++	if (!sp->info->no_spi_delay)
++		ndelay(nsecs);
++}
++
++#define spidelay(nsecs) do {					\
++	/* Steal the spi_device pointer from our caller.	\
++	 * The bitbang-API should probably get fixed here... */	\
++	do_spidelay(spi, nsecs);				\
++  } while (0)
++
++#define EXPAND_BITBANG_TXRX
++#include "spi-bitbang-txrx.h"
++
++static u32 spi_gpio_txrx_mode0(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode1(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode2(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode3(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
++}
++
++static void spi_gpio_chipselect(struct spi_device *dev, int on)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++
++	if (sp->info->cs_activelow)
++		on = !on;
++	gpio_set_value(sp->info->pin_cs, on ? 1 : 0);
++}
++
++static int spi_gpio_probe(struct platform_device *pdev)
++{
++	struct spi_master *master;
++	struct spi_gpio_platform_data *pdata;
++	struct spi_gpio *sp;
++	struct spi_device *spidev;
++	int err;
++
++	pdata = pdev->dev.platform_data;
++	if (!pdata)
++		return -ENXIO;
++
++	err = -ENOMEM;
++	master = spi_alloc_master(&pdev->dev, sizeof(struct spi_gpio));
++	if (!master)
++		goto err_alloc_master;
++
++	sp = spi_master_get_devdata(master);
++	platform_set_drvdata(pdev, sp);
++	sp->info = pdata;
++
++	err = gpio_request(pdata->pin_clk, "spi_clock");
++	if (err)
++		goto err_request_clk;
++	err = gpio_request(pdata->pin_mosi, "spi_mosi");
++	if (err)
++		goto err_request_mosi;
++	err = gpio_request(pdata->pin_miso, "spi_miso");
++	if (err)
++		goto err_request_miso;
++	err = gpio_request(pdata->pin_cs, "spi_cs");
++	if (err)
++		goto err_request_cs;
++
++	sp->bitbang.master = spi_master_get(master);
++	sp->bitbang.master->bus_num = -1;
++	sp->bitbang.master->num_chipselect = 1;
++	sp->bitbang.chipselect = spi_gpio_chipselect;
++	sp->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_mode0;
++	sp->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_mode1;
++	sp->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_mode2;
++	sp->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_mode3;
++
++	gpio_direction_output(pdata->pin_clk, 0);
++	gpio_direction_output(pdata->pin_mosi, 0);
++	gpio_direction_output(pdata->pin_cs,
++			      pdata->cs_activelow ? 1 : 0);
++	gpio_direction_input(pdata->pin_miso);
++
++	err = spi_bitbang_start(&sp->bitbang);
++	if (err)
++		goto err_no_bitbang;
++	err = pdata->boardinfo_setup(&sp->bi, master,
++				     pdata->boardinfo_setup_data);
++	if (err)
++		goto err_bi_setup;
++	sp->bi.controller_data = sp;
++	spidev = spi_new_device(master, &sp->bi);
++	if (!spidev)
++		goto err_new_dev;
++
++	return 0;
++
++err_new_dev:
++err_bi_setup:
++	spi_bitbang_stop(&sp->bitbang);
++err_no_bitbang:
++	spi_master_put(sp->bitbang.master);
++	gpio_free(pdata->pin_cs);
++err_request_cs:
++	gpio_free(pdata->pin_miso);
++err_request_miso:
++	gpio_free(pdata->pin_mosi);
++err_request_mosi:
++	gpio_free(pdata->pin_clk);
++err_request_clk:
++	kfree(master);
++
++err_alloc_master:
++	return err;
++}
++
++static int __devexit spi_gpio_remove(struct platform_device *pdev)
++{
++	struct spi_gpio *sp;
++	struct spi_gpio_platform_data *pdata;
++
++	pdata = pdev->dev.platform_data;
++	sp = platform_get_drvdata(pdev);
++
++	gpio_free(pdata->pin_clk);
++	gpio_free(pdata->pin_mosi);
++	gpio_free(pdata->pin_miso);
++	gpio_free(pdata->pin_cs);
++	spi_bitbang_stop(&sp->bitbang);
++	spi_master_put(sp->bitbang.master);
++
++	return 0;
++}
++
++static struct platform_driver spi_gpio_driver = {
++	.driver		= {
++		.name	= SPI_GPIO_PLATDEV_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe		= spi_gpio_probe,
++	.remove		= __devexit_p(spi_gpio_remove),
++};
++
++int spi_gpio_next_id(void)
++{
++	static atomic_t counter = ATOMIC_INIT(-1);
++
++	return atomic_inc_return(&counter);
++}
++EXPORT_SYMBOL(spi_gpio_next_id);
++
++static int __init spi_gpio_init(void)
++{
++	int err;
++
++	err = platform_driver_register(&spi_gpio_driver);
++	if (err)
++		printk(KERN_ERR "spi-gpio: register failed: %d\n", err);
++
++	return err;
++}
++module_init(spi_gpio_init);
++
++static void __exit spi_gpio_exit(void)
++{
++	platform_driver_unregister(&spi_gpio_driver);
++}
++module_exit(spi_gpio_exit);
++
++MODULE_AUTHOR("Piot Skamruk <piotr.skamruk at gmail.com>");
++MODULE_AUTHOR("Michael Buesch");
++MODULE_DESCRIPTION("Platform independent GPIO bitbanging SPI driver");
++MODULE_LICENSE("GPL v2");
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -154,6 +154,15 @@ config SPI_GPIO
+ 	  GPIO operations, you should be able to leverage that for better
+ 	  speed with a custom version of this driver; see the source code.
+ 
++config SPI_GPIO_OLD
++	tristate "Old GPIO API based bitbanging SPI controller (DEPRECATED)"
++	depends on SPI_MASTER && GENERIC_GPIO
++	select SPI_BITBANG
++	help
++	  This code is deprecated. Please use the new mainline SPI-GPIO driver.
++
++	  If unsure, say N.
++
+ config SPI_IMX
+ 	tristate "Freescale i.MX SPI controllers"
+ 	depends on ARCH_MXC
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_SPI_FSL_LIB)		+= spi-fsl-li
+ obj-$(CONFIG_SPI_FSL_ESPI)		+= spi-fsl-espi.o
+ obj-$(CONFIG_SPI_FSL_SPI)		+= spi-fsl-spi.o
+ obj-$(CONFIG_SPI_GPIO)			+= spi-gpio.o
++obj-$(CONFIG_SPI_GPIO_OLD)		+= spi_gpio_old.o
+ obj-$(CONFIG_SPI_IMX)			+= spi-imx.o
+ obj-$(CONFIG_SPI_LM70_LLP)		+= spi-lm70llp.o
+ obj-$(CONFIG_SPI_MPC512x_PSC)		+= spi-mpc512x-psc.o

target/linux/generic/patches-3.1/863-gpiommc.patch

@@ -0,0 +1,843 @@
+--- /dev/null
++++ b/drivers/mmc/host/gpiommc.c
+@@ -0,0 +1,608 @@
++/*
++ * Driver an MMC/SD card on a bitbanging GPIO SPI bus.
++ * This module hooks up the mmc_spi and spi_gpio modules and also
++ * provides a configfs interface.
++ *
++ * Copyright 2008 Michael Buesch <mb@bu3sch.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/mmc/gpiommc.h>
++#include <linux/platform_device.h>
++#include <linux/list.h>
++#include <linux/mutex.h>
++#include <linux/spi/spi_gpio_old.h>
++#include <linux/configfs.h>
++#include <linux/gpio.h>
++#include <asm/atomic.h>
++
++
++#define PFX				"gpio-mmc: "
++
++
++struct gpiommc_device {
++	struct platform_device *pdev;
++	struct platform_device *spi_pdev;
++	struct spi_board_info boardinfo;
++};
++
++
++MODULE_DESCRIPTION("GPIO based MMC driver");
++MODULE_AUTHOR("Michael Buesch");
++MODULE_LICENSE("GPL");
++
++
++static int gpiommc_boardinfo_setup(struct spi_board_info *bi,
++				   struct spi_master *master,
++				   void *data)
++{
++	struct gpiommc_device *d = data;
++	struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data;
++
++	/* Bind the SPI master to the MMC-SPI host driver. */
++	strlcpy(bi->modalias, "mmc_spi", sizeof(bi->modalias));
++
++	bi->max_speed_hz = pdata->max_bus_speed;
++	bi->bus_num = master->bus_num;
++	bi->mode = pdata->mode;
++
++	return 0;
++}
++
++static int gpiommc_probe(struct platform_device *pdev)
++{
++	struct gpiommc_platform_data *mmc_pdata = pdev->dev.platform_data;
++	struct spi_gpio_platform_data spi_pdata;
++	struct gpiommc_device *d;
++	int err;
++
++	err = -ENXIO;
++	if (!mmc_pdata)
++		goto error;
++
++#ifdef CONFIG_MMC_SPI_MODULE
++	err = request_module("mmc_spi");
++	if (err) {
++		printk(KERN_WARNING PFX
++		       "Failed to request mmc_spi module.\n");
++	}
++#endif /* CONFIG_MMC_SPI_MODULE */
++
++	/* Allocate the GPIO-MMC device */
++	err = -ENOMEM;
++	d = kzalloc(sizeof(*d), GFP_KERNEL);
++	if (!d)
++		goto error;
++	d->pdev = pdev;
++
++	/* Create the SPI-GPIO device */
++	d->spi_pdev = platform_device_alloc(SPI_GPIO_PLATDEV_NAME,
++					    spi_gpio_next_id());
++	if (!d->spi_pdev)
++		goto err_free_d;
++
++	memset(&spi_pdata, 0, sizeof(spi_pdata));
++	spi_pdata.pin_clk = mmc_pdata->pins.gpio_clk;
++	spi_pdata.pin_miso = mmc_pdata->pins.gpio_do;
++	spi_pdata.pin_mosi = mmc_pdata->pins.gpio_di;
++	spi_pdata.pin_cs = mmc_pdata->pins.gpio_cs;
++	spi_pdata.cs_activelow = mmc_pdata->pins.cs_activelow;
++	spi_pdata.no_spi_delay = mmc_pdata->no_spi_delay;
++	spi_pdata.boardinfo_setup = gpiommc_boardinfo_setup;
++	spi_pdata.boardinfo_setup_data = d;
++
++	err = platform_device_add_data(d->spi_pdev, &spi_pdata,
++				       sizeof(spi_pdata));
++	if (err)
++		goto err_free_pdev;
++	err = platform_device_add(d->spi_pdev);
++	if (err)
++		goto err_free_pdata;
++	platform_set_drvdata(pdev, d);
++
++	printk(KERN_INFO PFX "MMC-Card \"%s\" "
++	       "attached to GPIO pins di=%u, do=%u, clk=%u, cs=%u\n",
++	       mmc_pdata->name, mmc_pdata->pins.gpio_di,
++	       mmc_pdata->pins.gpio_do,
++	       mmc_pdata->pins.gpio_clk,
++	       mmc_pdata->pins.gpio_cs);
++
++	return 0;
++
++err_free_pdata:
++	kfree(d->spi_pdev->dev.platform_data);
++	d->spi_pdev->dev.platform_data = NULL;
++err_free_pdev:
++	platform_device_put(d->spi_pdev);
++err_free_d:
++	kfree(d);
++error:
++	return err;
++}
++
++static int gpiommc_remove(struct platform_device *pdev)
++{
++	struct gpiommc_device *d = platform_get_drvdata(pdev);
++	struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data;
++
++	platform_device_unregister(d->spi_pdev);
++	printk(KERN_INFO PFX "GPIO based MMC-Card \"%s\" removed\n",
++	       pdata->name);
++	platform_device_put(d->spi_pdev);
++
++	return 0;
++}
++
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++
++/* A device that was created through configfs */
++struct gpiommc_configfs_device {
++	struct config_item item;
++	/* The platform device, after registration. */
++	struct platform_device *pdev;
++	/* The configuration */
++	struct gpiommc_platform_data pdata;
++};
++
++#define GPIO_INVALID	-1
++
++static inline bool gpiommc_is_registered(struct gpiommc_configfs_device *dev)
++{
++	return (dev->pdev != NULL);
++}
++
++static inline struct gpiommc_configfs_device *ci_to_gpiommc(struct config_item *item)
++{
++	return item ? container_of(item, struct gpiommc_configfs_device, item) : NULL;
++}
++
++static struct configfs_attribute gpiommc_attr_DI = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_data_in",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_DO = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_data_out",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CLK = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_clock",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CS = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_chipselect",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CS_activelow = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_chipselect_activelow",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_spimode = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "spi_mode",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_spidelay = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "spi_delay",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_max_bus_speed = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "max_bus_speed",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_register = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "register",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute *gpiommc_config_attrs[] = {
++	&gpiommc_attr_DI,
++	&gpiommc_attr_DO,
++	&gpiommc_attr_CLK,
++	&gpiommc_attr_CS,
++	&gpiommc_attr_CS_activelow,
++	&gpiommc_attr_spimode,
++	&gpiommc_attr_spidelay,
++	&gpiommc_attr_max_bus_speed,
++	&gpiommc_attr_register,
++	NULL,
++};
++
++static ssize_t gpiommc_config_attr_show(struct config_item *item,
++					struct configfs_attribute *attr,
++					char *page)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++	ssize_t count = 0;
++	unsigned int gpio;
++	int err = 0;
++
++	if (attr == &gpiommc_attr_DI) {
++		gpio = dev->pdata.pins.gpio_di;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_DO) {
++		gpio = dev->pdata.pins.gpio_do;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CLK) {
++		gpio = dev->pdata.pins.gpio_clk;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS) {
++		gpio = dev->pdata.pins.gpio_cs;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS_activelow) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.pins.cs_activelow);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spimode) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.mode);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spidelay) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 !dev->pdata.no_spi_delay);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_max_bus_speed) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.max_bus_speed);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_register) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 gpiommc_is_registered(dev));
++		goto out;
++	}
++	WARN_ON(1);
++	err = -ENOSYS;
++out:
++	return err ? err : count;
++}
++
++static int gpiommc_do_register(struct gpiommc_configfs_device *dev,
++			       const char *name)
++{
++	int err;
++
++	if (gpiommc_is_registered(dev))
++		return 0;
++
++	if (!gpio_is_valid(dev->pdata.pins.gpio_di) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_do) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_clk) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_cs)) {
++		printk(KERN_ERR PFX
++		       "configfs: Invalid GPIO pin number(s)\n");
++		return -EINVAL;
++	}
++
++	strlcpy(dev->pdata.name, name,
++		sizeof(dev->pdata.name));
++
++	dev->pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME,
++					  gpiommc_next_id());
++	if (!dev->pdev)
++		return -ENOMEM;
++	err = platform_device_add_data(dev->pdev, &dev->pdata,
++				       sizeof(dev->pdata));
++	if (err) {
++		platform_device_put(dev->pdev);
++		return err;
++	}
++	err = platform_device_add(dev->pdev);
++	if (err) {
++		platform_device_put(dev->pdev);
++		return err;
++	}
++
++	return 0;
++}
++
++static void gpiommc_do_unregister(struct gpiommc_configfs_device *dev)
++{
++	if (!gpiommc_is_registered(dev))
++		return;
++
++	platform_device_unregister(dev->pdev);
++	dev->pdev = NULL;
++}
++
++static ssize_t gpiommc_config_attr_store(struct config_item *item,
++					 struct configfs_attribute *attr,
++					 const char *page, size_t count)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++	int err = -EINVAL;
++	unsigned long data;
++
++	if (attr == &gpiommc_attr_register) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data == 1)
++			err = gpiommc_do_register(dev, item->ci_name);
++		if (data == 0) {
++			gpiommc_do_unregister(dev);
++			err = 0;
++		}
++		goto out;
++	}
++
++	if (gpiommc_is_registered(dev)) {
++		/* The rest of the config parameters can only be set
++		 * as long as the device is not registered, yet. */
++		err = -EBUSY;
++		goto out;
++	}
++
++	if (attr == &gpiommc_attr_DI) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_di = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_DO) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_do = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CLK) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_clk = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_cs = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS_activelow) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data != 0 && data != 1)
++			goto out;
++		dev->pdata.pins.cs_activelow = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spimode) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		switch (data) {
++		case 0:
++			dev->pdata.mode = SPI_MODE_0;
++			break;
++		case 1:
++			dev->pdata.mode = SPI_MODE_1;
++			break;
++		case 2:
++			dev->pdata.mode = SPI_MODE_2;
++			break;
++		case 3:
++			dev->pdata.mode = SPI_MODE_3;
++			break;
++		default:
++			goto out;
++		}
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spidelay) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data != 0 && data != 1)
++			goto out;
++		dev->pdata.no_spi_delay = !data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_max_bus_speed) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data > UINT_MAX)
++			goto out;
++		dev->pdata.max_bus_speed = data;
++		err = 0;
++		goto out;
++	}
++	WARN_ON(1);
++	err = -ENOSYS;
++out:
++	return err ? err : count;
++}
++
++static void gpiommc_config_item_release(struct config_item *item)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++
++	kfree(dev);
++}
++
++static struct configfs_item_operations gpiommc_config_item_ops = {
++	.release		= gpiommc_config_item_release,
++	.show_attribute		= gpiommc_config_attr_show,
++	.store_attribute	= gpiommc_config_attr_store,
++};
++
++static struct config_item_type gpiommc_dev_ci_type = {
++	.ct_item_ops	= &gpiommc_config_item_ops,
++	.ct_attrs	= gpiommc_config_attrs,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct config_item *gpiommc_make_item(struct config_group *group,
++					     const char *name)
++{
++	struct gpiommc_configfs_device *dev;
++
++	if (strlen(name) > GPIOMMC_MAX_NAMELEN) {
++		printk(KERN_ERR PFX "configfs: device name too long\n");
++		return NULL;
++	}
++
++	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
++	if (!dev)
++		return NULL;
++
++	config_item_init_type_name(&dev->item, name,
++				   &gpiommc_dev_ci_type);
++
++	/* Assign default configuration */
++	dev->pdata.pins.gpio_di = GPIO_INVALID;
++	dev->pdata.pins.gpio_do = GPIO_INVALID;
++	dev->pdata.pins.gpio_clk = GPIO_INVALID;
++	dev->pdata.pins.gpio_cs = GPIO_INVALID;
++	dev->pdata.pins.cs_activelow = 1;
++	dev->pdata.mode = SPI_MODE_0;
++	dev->pdata.no_spi_delay = 0;
++	dev->pdata.max_bus_speed = 5000000; /* 5 MHz */
++
++	return &(dev->item);
++}
++
++static void gpiommc_drop_item(struct config_group *group,
++			      struct config_item *item)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++
++	gpiommc_do_unregister(dev);
++	kfree(dev);
++}
++
++static struct configfs_group_operations gpiommc_ct_group_ops = {
++	.make_item	= gpiommc_make_item,
++	.drop_item	= gpiommc_drop_item,
++};
++
++static struct config_item_type gpiommc_ci_type = {
++	.ct_group_ops	= &gpiommc_ct_group_ops,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct configfs_subsystem gpiommc_subsys = {
++	.su_group = {
++		.cg_item = {
++			.ci_namebuf = GPIOMMC_PLATDEV_NAME,
++			.ci_type = &gpiommc_ci_type,
++		},
++	},
++	.su_mutex = __MUTEX_INITIALIZER(gpiommc_subsys.su_mutex),
++};
++
++#endif /* CONFIG_GPIOMMC_CONFIGFS */
++
++static struct platform_driver gpiommc_plat_driver = {
++	.probe	= gpiommc_probe,
++	.remove	= gpiommc_remove,
++	.driver	= {
++		.name	= GPIOMMC_PLATDEV_NAME,
++		.owner	= THIS_MODULE,
++	},
++};
++
++int gpiommc_next_id(void)
++{
++	static atomic_t counter = ATOMIC_INIT(-1);
++
++	return atomic_inc_return(&counter);
++}
++EXPORT_SYMBOL(gpiommc_next_id);
++
++static int __init gpiommc_modinit(void)
++{
++	int err;
++
++	err = platform_driver_register(&gpiommc_plat_driver);
++	if (err)
++		return err;
++
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++	config_group_init(&gpiommc_subsys.su_group);
++	err = configfs_register_subsystem(&gpiommc_subsys);
++	if (err) {
++		platform_driver_unregister(&gpiommc_plat_driver);
++		return err;
++	}
++#endif /* CONFIG_GPIOMMC_CONFIGFS */
++
++	return 0;
++}
++module_init(gpiommc_modinit);
++
++static void __exit gpiommc_modexit(void)
++{
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++	configfs_unregister_subsystem(&gpiommc_subsys);
++#endif
++	platform_driver_unregister(&gpiommc_plat_driver);
++}
++module_exit(gpiommc_modexit);
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -474,6 +474,31 @@ config MMC_SDHI
+ 	  This provides support for the SDHI SD/SDIO controller found in
+ 	  SuperH and ARM SH-Mobile SoCs
+ 
++config GPIOMMC
++	tristate "MMC/SD over GPIO-based SPI"
++	depends on MMC && MMC_SPI && SPI_GPIO_OLD
++	help
++	  This driver hooks up the mmc_spi and spi_gpio modules so that
++	  MMC/SD cards can be used on a GPIO based bus by bitbanging
++	  the SPI protocol in software.
++
++	  This driver provides a configfs interface to dynamically create
++	  and destroy GPIO-based MMC/SD card devices. It also provides
++	  a platform device interface API.
++	  See Documentation/gpiommc.txt for details.
++
++	  The module will be called gpiommc.
++
++	  If unsure, say N.
++
++config GPIOMMC_CONFIGFS
++	bool
++	depends on GPIOMMC && CONFIGFS_FS
++	default y
++	help
++	  This option automatically enables configfs support for gpiommc
++	  if configfs is available.
++
+ config MMC_CB710
+ 	tristate "ENE CB710 MMC/SD Interface support"
+ 	depends on PCI
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -36,6 +36,7 @@ tmio_mmc_core-$(subst m,y,$(CONFIG_MMC_S
+ obj-$(CONFIG_MMC_SDHI)		+= sh_mobile_sdhi.o
+ obj-$(CONFIG_MMC_CB710)		+= cb710-mmc.o
+ obj-$(CONFIG_MMC_VIA_SDMMC)	+= via-sdmmc.o
++obj-$(CONFIG_GPIOMMC)		+= gpiommc.o
+ obj-$(CONFIG_SDH_BFIN)		+= bfin_sdh.o
+ obj-$(CONFIG_MMC_DW)		+= dw_mmc.o
+ obj-$(CONFIG_MMC_SH_MMCIF)	+= sh_mmcif.o
+--- /dev/null
++++ b/include/linux/mmc/gpiommc.h
+@@ -0,0 +1,71 @@
++/*
++ * Device driver for MMC/SD cards driven over a GPIO bus.
++ *
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * Licensed under the GNU/GPL version 2.
++ */
++#ifndef LINUX_GPIOMMC_H_
++#define LINUX_GPIOMMC_H_
++
++#include <linux/types.h>
++
++
++#define GPIOMMC_MAX_NAMELEN		15
++#define GPIOMMC_MAX_NAMELEN_STR		__stringify(GPIOMMC_MAX_NAMELEN)
++
++/**
++ * struct gpiommc_pins - Hardware pin assignments
++ *
++ * @gpio_di: The GPIO number of the DATA IN pin
++ * @gpio_do: The GPIO number of the DATA OUT pin
++ * @gpio_clk: The GPIO number of the CLOCK pin
++ * @gpio_cs: The GPIO number of the CHIPSELECT pin
++ * @cs_activelow: If true, the chip is considered selected if @gpio_cs is low.
++ */
++struct gpiommc_pins {
++	unsigned int gpio_di;
++	unsigned int gpio_do;
++	unsigned int gpio_clk;
++	unsigned int gpio_cs;
++	bool cs_activelow;
++};
++
++/**
++ * struct gpiommc_platform_data - Platform data for a MMC-over-SPI-GPIO device.
++ *
++ * @name: The unique name string of the device.
++ * @pins: The hardware pin assignments.
++ * @mode: The hardware mode. This is either SPI_MODE_0,
++ *        SPI_MODE_1, SPI_MODE_2 or SPI_MODE_3. See the SPI documentation.
++ * @no_spi_delay: Do not use delays in the lowlevel SPI bitbanging code.
++ *                This is not standards compliant, but may be required for some
++ *                embedded machines to gain reasonable speed.
++ * @max_bus_speed: The maximum speed of the SPI bus, in Hertz.
++ */
++struct gpiommc_platform_data {
++	char name[GPIOMMC_MAX_NAMELEN + 1];
++	struct gpiommc_pins pins;
++	u8 mode;
++	bool no_spi_delay;
++	unsigned int max_bus_speed;
++};
++
++/**
++ * GPIOMMC_PLATDEV_NAME - The platform device name string.
++ *
++ * The name string that has to be used for platform_device_alloc
++ * when allocating a gpiommc device.
++ */
++#define GPIOMMC_PLATDEV_NAME	"gpiommc"
++
++/**
++ * gpiommc_next_id - Get another platform device ID number.
++ *
++ * This returns the next platform device ID number that has to be used
++ * for platform_device_alloc. The ID is opaque and should not be used for
++ * anything else.
++ */
++int gpiommc_next_id(void);
++
++#endif /* LINUX_GPIOMMC_H_ */
+--- /dev/null
++++ b/Documentation/gpiommc.txt
+@@ -0,0 +1,97 @@
++GPIOMMC - Driver for an MMC/SD card on a bitbanging GPIO SPI bus
++================================================================
++
++The gpiommc module hooks up the mmc_spi and spi_gpio modules for running an
++MMC or SD card on GPIO pins.
++
++Two interfaces for registering a new MMC/SD card device are provided:
++A static platform-device based mechanism and a dynamic configfs based interface.
++
++
++Registering devices via platform-device
++=======================================
++
++The platform-device interface is used for registering MMC/SD devices that are
++part of the hardware platform. This is most useful only for embedded machines
++with MMC/SD devices statically connected to the platform GPIO bus.
++
++The data structures are declared in <linux/mmc/gpiommc.h>.
++
++To register a new device, define an instance of struct gpiommc_platform_data.
++This structure holds any information about how the device is hooked up to the
++GPIO pins and what hardware modes the device supports. See the docbook-style
++documentation in the header file for more information on the struct fields.
++
++Then allocate a new instance of a platform device by doing:
++
++	pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME, gpiommc_next_id());
++
++This will allocate the platform device data structures and hook it up to the
++gpiommc driver.
++Then add the gpiommc_platform_data to the platform device.
++
++	err = platform_device_add_data(pdev, pdata, sizeof(struct gpiommc_platform_data));
++
++You may free the local instance of struct gpiommc_platform_data now. (So the
++struct may be allocated on the stack, too).
++Now simply register the platform device.
++
++	err = platform_device_add(pdev);
++
++Done. The gpiommc probe routine will be invoked now and you should see a kernel
++log message for the added device.
++
++
++Registering devices via configfs
++================================
++
++MMC/SD cards connected via GPIO often are a pretty dynamic thing, as for example
++selfmade hacks for soldering an MMC/SD card to standard GPIO pins on embedded
++hardware are a common situation.
++So we provide a dynamic interface to conveniently handle adding and removing
++devices from userspace, without the need to recompile the kernel.
++
++The "gpiommc" subdirectory at the configfs mountpoint is used for handling
++the dynamic configuration.
++
++To create a new device, it must first be allocated with mkdir.
++The following command will allocate a device named "my_mmc":
++	mkdir /config/gpiommc/my_mmc
++
++There are several configuration files available in the new
++/config/gpiommc/my_mmc/ directory:
++
++gpio_data_in			= The SPI data-IN GPIO pin number.
++gpio_data_out			= The SPI data-OUT GPIO pin number.
++gpio_clock			= The SPI Clock GPIO pin number.
++gpio_chipselect			= The SPI Chipselect GPIO pin number.
++gpio_chipselect_activelow	= Boolean. If 0, Chipselect is active-HIGH.
++				  If 1, Chipselect is active-LOW.
++spi_mode			= The SPI data mode. Can be 0-3.
++spi_delay			= Enable all delays in the lowlevel bitbanging.
++max_bus_speed			= The maximum SPI bus speed. In Hertz.
++
++register			= Not a configuration parameter.
++				  Used to register the configured card
++				  with the kernel.
++
++The device must first get configured and then registered by writing "1" to
++the "register" file.
++The configuration parameters "gpio_data_in", "gpio_data_out", "gpio_clock"
++and "gpio_chipselect" are essential and _must_ be configured before writing
++"1" to the "register" file. The registration will fail, otherwise.
++
++The default values for the other parameters are:
++gpio_chipselect_activelow	= 1		(CS active-LOW)
++spi_mode			= 0		(SPI_MODE_0)
++spi_delay			= 1		(enabled)
++max_bus_speed			= 5000000	(5 Mhz)
++
++Configuration values can not be changed after registration. To unregister
++the device, write a "0" to the "register" file. The configuration can be
++changed again after unregistering.
++
++To completely remove the device, simply rmdir the directory
++(/config/gpiommc/my_mmc in this example).
++There's no need to first unregister the device before removing it. That will
++be done automatically.
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -2933,6 +2933,11 @@ L:	linuxppc-dev@lists.ozlabs.org
+ S:	Odd Fixes
+ F:	drivers/tty/hvc/
+ 
++GPIOMMC DRIVER
++P:	Michael Buesch
++M:	mb@bu3sch.de
++S:	Maintained
++
+ HARDWARE MONITORING
+ M:	Jean Delvare <khali@linux-fr.org>
+ M:	Guenter Roeck <guenter.roeck@ericsson.com>

target/linux/generic/patches-3.1/864-gpiommc_configfs_locking.patch

@@ -0,0 +1,58 @@
+The gpiommc configfs context structure needs locking, as configfs
+does not lock access between files.
+
+--- a/drivers/mmc/host/gpiommc.c
++++ b/drivers/mmc/host/gpiommc.c
+@@ -143,6 +143,8 @@ struct gpiommc_configfs_device {
+ 	struct platform_device *pdev;
+ 	/* The configuration */
+ 	struct gpiommc_platform_data pdata;
++	/* Mutex to protect this structure */
++	struct mutex mutex;
+ };
+ 
+ #define GPIO_INVALID	-1
+@@ -233,6 +235,8 @@ static ssize_t gpiommc_config_attr_show(
+ 	unsigned int gpio;
+ 	int err = 0;
+ 
++	mutex_lock(&dev->mutex);
++
+ 	if (attr == &gpiommc_attr_DI) {
+ 		gpio = dev->pdata.pins.gpio_di;
+ 		if (gpio == GPIO_INVALID)
+@@ -293,6 +297,8 @@ static ssize_t gpiommc_config_attr_show(
+ 	WARN_ON(1);
+ 	err = -ENOSYS;
+ out:
++	mutex_unlock(&dev->mutex);
++
+ 	return err ? err : count;
+ }
+ 
+@@ -352,6 +358,8 @@ static ssize_t gpiommc_config_attr_store
+ 	int err = -EINVAL;
+ 	unsigned long data;
+ 
++	mutex_lock(&dev->mutex);
++
+ 	if (attr == &gpiommc_attr_register) {
+ 		err = strict_strtoul(page, 10, &data);
+ 		if (err)
+@@ -477,6 +485,8 @@ static ssize_t gpiommc_config_attr_store
+ 	WARN_ON(1);
+ 	err = -ENOSYS;
+ out:
++	mutex_unlock(&dev->mutex);
++
+ 	return err ? err : count;
+ }
+ 
+@@ -513,6 +523,7 @@ static struct config_item *gpiommc_make_
+ 	if (!dev)
+ 		return NULL;
+ 
++	mutex_init(&dev->mutex);
+ 	config_item_init_type_name(&dev->item, name,
+ 				   &gpiommc_dev_ci_type);
+