1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2025-04-21 12:27:27 +03:00

[adm5120] remove 2.6.25 specific stuff

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12598 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
juhosg
2008-09-13 17:32:20 +00:00
parent efd888e4be
commit b610f4bee8
85 changed files with 1 additions and 14419 deletions

View File

@@ -1,21 +0,0 @@
/*
* $Id$
*
* Broadcom's CFE definitions
*
* Copyright (C) 2006,2007 Gabor Juhos <juhosg at openwrt.org>
* Copyright (C) 2007 OpenWrt.org
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
*/
#ifndef _PROM_CFE_H_
#define _PROM_CFE_H_
extern int cfe_present(void) __init;
extern char *cfe_getenv(char *);
#endif /*_PROM_CFE_H_*/

View File

@@ -1,21 +0,0 @@
/*
* $Id$
*
* Generic prom definitions
*
* Copyright (C) 2006,2007 Gabor Juhos <juhosg at openwrt.org>
* Copyright (C) 2007 OpenWrt.org
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
*/
#ifndef _PROM_GENERIC_H_
#define _PROM_GENERIC_H_
extern int generic_prom_present(void) __init;
extern char *generic_prom_getenv(char *);
#endif /*_PROM_GENERIC_H_*/

View File

@@ -1,181 +0,0 @@
/*
* $Id$
*
* Compex's MyLoader specific definitions
*
* Copyright (C) 2006,2007 Gabor Juhos <juhosg at openwrt.org>
* Copyright (C) 2007 OpenWrt.org
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
*/
#ifndef _MYLOADER_H_
#define _MYLOADER_H_
/*
* Firmware file format:
*
* <header>
* [<block descriptor 0>]
* ...
* [<block descriptor n>]
* <null block descriptor>
* [<block data 0>]
* ...
* [<block data n>]
*
*
*/
/* Myloader specific magic numbers */
#define MYLO_MAGIC_FIRMWARE 0x4C594D00
#define MYLO_MAGIC_20021103 0x20021103
#define MYLO_MAGIC_20021107 0x20021107
#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107
#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103
#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103
/*
* Addresses of the data structures provided by MyLoader
*/
#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */
#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */
#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */
#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */
/* Vendor ID's (seems to be same as the PCI vendor ID's) */
#define VENID_COMPEX 0x11F6
/* Devices based on the ADM5120 */
#define DEVID_COMPEX_NP27G 0x0078
#define DEVID_COMPEX_NP28G 0x044C
#define DEVID_COMPEX_NP28GHS 0x044E
#define DEVID_COMPEX_WP54Gv1C 0x0514
#define DEVID_COMPEX_WP54G 0x0515
#define DEVID_COMPEX_WP54AG 0x0546
#define DEVID_COMPEX_WPP54AG 0x0550
#define DEVID_COMPEX_WPP54G 0x0555
/* Devices based on the IXP422 */
#define DEVID_COMPEX_WP18 0x047E
#define DEVID_COMPEX_NP18A 0x0489
/* Other devices */
#define DEVID_COMPEX_NP26G8M 0x03E8
#define DEVID_COMPEX_NP26G16M 0x03E9
struct mylo_fw_header {
uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */
uint32_t crc; /* CRC of the whole firmware */
uint32_t res0; /* unknown/unused */
uint32_t res1; /* unknown/unused */
uint16_t vid; /* vendor ID */
uint16_t did; /* device ID */
uint16_t svid; /* sub vendor ID */
uint16_t sdid; /* sub device ID */
uint32_t rev; /* device revision */
uint32_t fwhi; /* FIXME: firmware version high? */
uint32_t fwlo; /* FIXME: firmware version low? */
uint32_t flags; /* firmware flags */
};
#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */
#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */
struct mylo_fw_blockdesc {
uint32_t type; /* block type */
uint32_t addr; /* relative address to flash start */
uint32_t dlen; /* size of block data in bytes */
uint32_t blen; /* total size of block in bytes */
};
#define FW_DESC_TYPE_UNUSED 0
#define FW_DESC_TYPE_USED 1
struct mylo_partition {
uint16_t flags; /* partition flags */
uint16_t type; /* type of the partition */
uint32_t addr; /* relative address of the partition from the
flash start */
uint32_t size; /* size of the partition in bytes */
uint32_t param; /* if this is the active partition, the
MyLoader load code to this address */
};
#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition,
* MyLoader loads firmware from here */
#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */
#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */
#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM
* before decompression */
#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */
#define PARTITION_TYPE_FREE 0
#define PARTITION_TYPE_USED 1
#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the
partition table */
struct mylo_partition_table {
uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */
uint32_t res0; /* unknown/unused */
uint32_t res1; /* unknown/unused */
uint32_t res2; /* unknown/unused */
struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
};
struct mylo_partition_header {
uint32_t len; /* length of the partition data */
uint32_t crc; /* CRC value of the partition data */
};
struct mylo_system_params {
uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */
uint32_t res0;
uint32_t res1;
uint32_t mylo_ver;
uint16_t vid; /* Vendor ID */
uint16_t did; /* Device ID */
uint16_t svid; /* Sub Vendor ID */
uint16_t sdid; /* Sub Device ID */
uint32_t rev; /* device revision */
uint32_t fwhi;
uint32_t fwlo;
uint32_t tftp_addr;
uint32_t prog_start;
uint32_t flash_size; /* Size of boot FLASH in bytes */
uint32_t dram_size; /* Size of onboard RAM in bytes */
};
struct mylo_eth_addr {
uint8_t mac[6];
uint8_t csum[2];
};
#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address
in the board parameters */
struct mylo_board_params {
uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */
uint32_t res0;
uint32_t res1;
uint32_t res2;
struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
};
struct myloader_info {
u32 vid;
u32 did;
u32 svid;
u32 sdid;
};
extern struct myloader_info myloader_info;
extern int myloader_present(void) __init;
#endif /* _MYLOADER_H_*/

View File

@@ -1,128 +0,0 @@
/*
* $Id$
*
* Mikrotik's RouterBOOT definitions
*
* Copyright (C) 2007 OpenWrt.org
* Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
*/
#ifndef _ROUTERBOOT_H
#define _ROUTERBOOT_H
#define RB_MAC_SIZE 6
struct rb_bios_settings {
u32 hs_offs; /* hard settings offset */
u32 hs_size; /* hard settings size */
u32 fw_offs; /* firmware offset */
u32 ss_offs; /* soft settings offset */
u32 ss_size; /* soft settings size */
};
struct rb_hard_settings {
char *name; /* board name */
char *bios_ver; /* BIOS version */
u32 mem_size; /* memory size in bytes */
u32 mac_count; /* number of mac addresses */
u8 *mac_base; /* mac address base */
};
/*
* Magic numbers
*/
#define RB_MAGIC_HARD 0x64726148 /* "Hard" */
#define RB_MAGIC_SOFT 0x74666F53 /* "Soft" */
#define RB_MAGIC_DAWN 0x6E776144 /* "Dawn" */
#define RB_ID_TERMINATOR 0
/*
* ID values for Hardware settings
*/
#define RB_ID_HARD_01 1
#define RB_ID_HARD_02 2
#define RB_ID_FLASH_INFO 3
#define RB_ID_MAC_ADDRESS_PACK 4
#define RB_ID_BOARD_NAME 5
#define RB_ID_BIOS_VERSION 6
#define RB_ID_HARD_07 7
#define RB_ID_SDRAM_TIMINGS 8
#define RB_ID_DEVICE_TIMINGS 9
#define RB_ID_SOFTWARE_ID 10
#define RB_ID_SERIAL_NUMBER 11
#define RB_ID_HARD_12 12
#define RB_ID_MEMORY_SIZE 13
#define RB_ID_MAC_ADDRESS_COUNT 14
/*
* ID values for Software settings
*/
#define RB_ID_UART_SPEED 1
#define RB_ID_BOOT_DELAY 2
#define RB_ID_BOOT_DEVICE 3
#define RB_ID_BOOT_KEY 4
#define RB_ID_CPU_MODE 5
#define RB_ID_FW_VERSION 6
#define RB_ID_SOFT_07 7
#define RB_ID_SOFT_08 8
#define RB_ID_BOOT_PROTOCOL 9
#define RB_ID_SOFT_10 10
#define RB_ID_SOFT_11 11
/*
* UART_SPEED values
*/
#define RB_UART_SPEED_115200 0
#define RB_UART_SPEED_57600 1
#define RB_UART_SPEED_38400 2
#define RB_UART_SPEED_19200 3
#define RB_UART_SPEED_9600 4
#define RB_UART_SPEED_4800 5
#define RB_UART_SPEED_2400 6
#define RB_UART_SPEED_1200 7
/*
* BOOT_DELAY values
*/
#define RB_BOOT_DELAY_0SEC 0
#define RB_BOOT_DELAY_1SEC 1
#define RB_BOOT_DELAY_2SEC 2
/*
* BOOT_DEVICE values
*/
#define RB_BOOT_DEVICE_ETHER 0
#define RB_BOOT_DEVICE_NANDETH 1
#define RB_BOOT_DEVICE_ETHONCE 2
#define RB_BOOT_DEVICE_NANDONLY 3
/*
* BOOT_KEY values
*/
#define RB_BOOT_KEY_ANY 0
#define RB_BOOT_KEY_DEL 1
/*
* CPU_MODE values
*/
#define RB_CPU_MODE_POWERSAVE 0
#define RB_CPU_MODE_REGULAR 1
/*
* BOOT_PROTOCOL values
*/
#define RB_BOOT_PROTOCOL_BOOTP 0
#define RB_BOOT_PROTOCOL_DHCP 1
extern int routerboot_present(void) __init;
extern char *routerboot_get_boardname(void);
extern struct rb_hard_settings rb_hs;
#endif /* _ROUTERBOOT_H */

View File

@@ -1,89 +0,0 @@
/*
* $Id$
*
* ZyNOS (ZyXEL's Networking OS) definitions
*
* Copyright (C) 2007 OpenWrt.org
* Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
*/
#ifndef _ZYNOS_H
#define _ZYNOS_H
#define ZYNOS_NAME_LEN 32
#define ZYNOS_FEAT_BYTES 22
#define ZYNOS_MAC_LEN 6
struct zynos_board_info {
unsigned char vendor[ZYNOS_NAME_LEN];
unsigned char product[ZYNOS_NAME_LEN];
u32 bootext_addr;
u32 res0;
u16 board_id;
u8 res1[6];
u8 feat_other[ZYNOS_FEAT_BYTES];
u8 feat_main;
u8 res2;
u8 mac[ZYNOS_MAC_LEN];
u8 country;
u8 dbgflag;
} __attribute__ ((packed));
/*
* Vendor IDs
*/
#define ZYNOS_VENDOR_ID_ZYXEL 0
#define ZYNOS_VENDOR_ID_NETGEAR 1
#define ZYNOS_VENDOR_ID_DLINK 2
#define ZYNOS_VENDOR_ID_OTHER 3
#define ZYNOS_VENDOR_ID_LUCENT 4
/*
* Vendor names
*/
#define ZYNOS_VENDOR_DLINK "D-Link"
#define ZYNOS_VENDOR_LUCENT "LUCENT"
#define ZYNOS_VENDOR_NETGEAR "NetGear"
#define ZYNOS_VENDOR_ZYXEL "ZyXEL"
/*
* Board IDs (big-endian)
*/
#define ZYNOS_BOARD_ES2108 0x00F2 /* Ethernet Switch 2108 */
#define ZYNOS_BOARD_ES2108F 0x01AF /* Ethernet Switch 2108-F */
#define ZYNOS_BOARD_ES2108G 0x00F3 /* Ethernet Switch 2108-G */
#define ZYNOS_BOARD_ES2108LC 0x00FC /* Ethernet Switch 2108-LC */
#define ZYNOS_BOARD_ES2108PWR 0x00F4 /* Ethernet Switch 2108PWR */
#define ZYNOS_BOARD_HS100 0x9FF1 /* HomeSafe 100/100W */
#define ZYNOS_BOARD_P334 0x9FF5 /* Prestige 334 */
#define ZYNOS_BOARD_P334U 0x9FDD /* Prestige 334U */
#define ZYNOS_BOARD_P334W 0x9FF3 /* Prestige 334W */
#define ZYNOS_BOARD_P334WH 0x00E0 /* Prestige 334WH */
#define ZYNOS_BOARD_P334WHD 0x00E1 /* Prestige 334WHD */
#define ZYNOS_BOARD_P334WT 0x9FEF /* Prestige 334WT */
#define ZYNOS_BOARD_P334WT_ALT 0x9F02 /* Prestige 334WT alternative */
#define ZYNOS_BOARD_P335 0x9FED /* Prestige 335/335WT */
#define ZYNOS_BOARD_P335PLUS 0x0025 /* Prestige 335Plus */
#define ZYNOS_BOARD_P335U 0x9FDC /* Prestige 335U */
/*
* Some magic numbers (big-endian)
*/
#define ZYNOS_MAGIC_DBGAREA1 0x48646267 /* "Hdbg" */
#define ZYNOS_MAGIC_DBGAREA2 0x61726561 /* "area" */
struct bootbase_info {
u16 vendor_id;
u16 board_id;
u8 mac[6];
};
extern struct bootbase_info bootbase_info;
extern int bootbase_present(void) __init;
#endif /* _ZYNOS_H */