From bccc5a230c0fbc1a21bef9c318c47812e8f7dde3 Mon Sep 17 00:00:00 2001 From: luka Date: Thu, 22 Nov 2012 21:16:04 +0000 Subject: [PATCH] [boot] uboot-kirkwood: update to 2012.10 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34303 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- package/boot/uboot-kirkwood/Makefile | 15 +- .../files/board/iomega/iconnect/Makefile | 43 - .../files/board/iomega/iconnect/iconnect.c | 141 --- .../files/board/iomega/iconnect/iconnect.h | 39 - .../files/board/iomega/iconnect/kwbimage.cfg | 165 ---- .../files/include/configs/iconnect.h | 124 --- .../uboot-kirkwood/patches/0001-ib62x0.patch | 542 ----------- .../uboot-kirkwood/patches/0002-kwboot.patch | 873 ------------------ .../uboot-kirkwood/patches/0003-ide_bus.patch | 17 - .../uboot-kirkwood/patches/100-iconnect.patch | 10 - 10 files changed, 5 insertions(+), 1964 deletions(-) delete mode 100644 package/boot/uboot-kirkwood/files/board/iomega/iconnect/Makefile delete mode 100644 package/boot/uboot-kirkwood/files/board/iomega/iconnect/iconnect.c delete mode 100644 package/boot/uboot-kirkwood/files/board/iomega/iconnect/iconnect.h delete mode 100644 package/boot/uboot-kirkwood/files/board/iomega/iconnect/kwbimage.cfg delete mode 100644 package/boot/uboot-kirkwood/files/include/configs/iconnect.h delete mode 100644 package/boot/uboot-kirkwood/patches/0001-ib62x0.patch delete mode 100644 package/boot/uboot-kirkwood/patches/0002-kwboot.patch delete mode 100644 package/boot/uboot-kirkwood/patches/0003-ide_bus.patch delete mode 100644 package/boot/uboot-kirkwood/patches/100-iconnect.patch diff --git a/package/boot/uboot-kirkwood/Makefile b/package/boot/uboot-kirkwood/Makefile index 48bcf9966..5824a4f71 100644 --- a/package/boot/uboot-kirkwood/Makefile +++ b/package/boot/uboot-kirkwood/Makefile @@ -9,13 +9,13 @@ include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/kernel.mk PKG_NAME:=u-boot -PKG_VERSION:=2012.04.01 +PKG_VERSION:=2012.10 PKG_RELEASE:=1 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 PKG_SOURCE_URL:=ftp://ftp.denx.de/pub/u-boot -PKG_MD5SUM:=192bb231082d9159fb6e16de3039b6b2 +PKG_MD5SUM:=8655f63b1e5c4647295ac9ce44660be3 PKG_TARGETS:=bin include $(INCLUDE_DIR)/package.mk @@ -67,11 +67,6 @@ UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT)) UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.bin) endif -define Build/Prepare - $(call Build/Prepare/Default) - $(CP) ./files/* $(PKG_BUILD_DIR) -endef - define Build/Configure $(MAKE) -C $(PKG_BUILD_DIR) \ $(UBOOT_CONFIG)_config @@ -84,11 +79,11 @@ define Build/Compile endef define Package/uboot/install/default - $(INSTALL_DIR) $(BIN_DIR) + $(INSTALL_DIR) $(BIN_DIR)/uboot-$(BOARD)-$(1) $(CP) $(PKG_BUILD_DIR)/u-boot.bin \ - $(BIN_DIR)/openwrt-$(BOARD)-$(1)-u-boot.bin + $(BIN_DIR)/uboot-$(BOARD)-$(1)/openwrt-$(BOARD)-$(1)-u-boot.bin $(CP) $(PKG_BUILD_DIR)/u-boot.kwb \ - $(BIN_DIR)/openwrt-$(BOARD)-$(1)-u-boot.kwb + $(BIN_DIR)/uboot-$(BOARD)-$(1)/openwrt-$(BOARD)-$(1)-u-boot.kwb $(INSTALL_DIR) $(BIN_DIR)/u-boot-kwboot/ $(CP) $(PKG_BUILD_DIR)/tools/kwboot \ $(BIN_DIR)/u-boot-kwboot/ diff --git a/package/boot/uboot-kirkwood/files/board/iomega/iconnect/Makefile b/package/boot/uboot-kirkwood/files/board/iomega/iconnect/Makefile deleted file mode 100644 index f77fcfb99..000000000 --- a/package/boot/uboot-kirkwood/files/board/iomega/iconnect/Makefile +++ /dev/null @@ -1,43 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor -# Written-by: Prafulla Wadaskar -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := iconnect.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/package/boot/uboot-kirkwood/files/board/iomega/iconnect/iconnect.c b/package/boot/uboot-kirkwood/files/board/iomega/iconnect/iconnect.c deleted file mode 100644 index 34ddadf8a..000000000 --- a/package/boot/uboot-kirkwood/files/board/iomega/iconnect/iconnect.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Copyright (C) 2009-2012 - * Wojciech Dubowik - * Luka Perkov - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include -#include -#include -#include -#include -#include "iconnect.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - /* - * default gpio configuration - * There are maximum 64 gpios controlled through 2 sets of registers - * the below configuration configures mainly initial LED status - */ - kw_config_gpio(ICONNECT_OE_VAL_LOW, - ICONNECT_OE_VAL_HIGH, - ICONNECT_OE_LOW, ICONNECT_OE_HIGH); - - /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, - MPP8_TW_SDA, - MPP9_TW_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_GPO, - MPP13_SD_CMD, - MPP14_SD_D0, - MPP15_SD_D1, - MPP16_SD_D2, - MPP17_SD_D3, - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_GE1_0, - MPP21_GE1_1, - MPP22_GE1_2, - MPP23_GE1_3, - MPP24_GE1_4, - MPP25_GE1_5, - MPP26_GE1_6, - MPP27_GE1_7, - MPP28_GPIO, - MPP29_GPIO, - MPP30_GE1_10, - MPP31_GE1_11, - MPP32_GE1_12, - MPP33_GE1_13, - MPP34_GE1_14, - MPP35_GPIO, - MPP36_AUDIO_SPDIFI, - MPP37_AUDIO_SPDIFO, - MPP38_GPIO, - MPP39_TDM_SPI_CS0, - MPP40_TDM_SPI_SCK, - MPP41_GPIO, - MPP42_GPIO, - MPP43_GPIO, - MPP44_GPIO, - MPP45_GPIO, - MPP46_GPIO, - MPP47_GPIO, - MPP48_GPIO, - MPP49_GPIO, - 0 - }; - kirkwood_mpp_conf(kwmpp_config); - return 0; -} - -int board_init(void) -{ - /* Boot parameters address */ - gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; - - return 0; -} - -#ifdef CONFIG_RESET_PHY_R -/* Configure and initialize PHY */ -void reset_phy(void) -{ - u16 reg; - u16 devadr; - char *name = "egiga0"; - - if (miiphy_set_current_dev(name)) - return; - - /* command to read PHY dev address */ - if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { - printf("Err..(%s) could not read PHY dev address\n", __func__); - return; - } - - /* - * Enable RGMII delay on Tx and Rx for CPU port - * Ref: sec 4.7.2 of chip datasheet - */ - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); - miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®); - reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); - miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg); - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); - - /* reset the phy */ - miiphy_reset(name, devadr); - - debug("88E1116 Initialized on %s\n", name); -} -#endif /* CONFIG_RESET_PHY_R */ diff --git a/package/boot/uboot-kirkwood/files/board/iomega/iconnect/iconnect.h b/package/boot/uboot-kirkwood/files/board/iomega/iconnect/iconnect.h deleted file mode 100644 index 2fb3e5ed8..000000000 --- a/package/boot/uboot-kirkwood/files/board/iomega/iconnect/iconnect.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 2009-2012 - * Wojciech Dubowik - * Luka Perkov - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifndef __ICONNECT_H -#define __ICONNECT_H - -#define ICONNECT_OE_LOW (~(1 << 7)) -#define ICONNECT_OE_HIGH (~(1 << 10)) -#define ICONNECT_OE_VAL_LOW (0) -#define ICONNECT_OE_VAL_HIGH (1 << 10) - -/* PHY related */ -#define MV88E1116_LED_FCTRL_REG 10 -#define MV88E1116_CPRSP_CR3_REG 21 -#define MV88E1116_MAC_CTRL_REG 21 -#define MV88E1116_PGADR_REG 22 -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) - -#endif /* __ICONNECT_H */ diff --git a/package/boot/uboot-kirkwood/files/board/iomega/iconnect/kwbimage.cfg b/package/boot/uboot-kirkwood/files/board/iomega/iconnect/kwbimage.cfg deleted file mode 100644 index dee546a52..000000000 --- a/package/boot/uboot-kirkwood/files/board/iomega/iconnect/kwbimage.cfg +++ /dev/null @@ -1,165 +0,0 @@ -# -# (C) Copyright 2009-2012 -# Wojciech Dubowik -# Luka Perkov -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . -# -# Refer docs/README.kwimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM nand -NAND_ECC_MODE default -NAND_PAGE_SIZE 0x0800 - -# SOC registers configuration using bootrom header extension -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xffd100e0 0x1b1b1b9b - -#Dram initalization for SINGLE x16 CL=5 @ 400MHz -DATA 0xffd01400 0x43000c30 # DDR Configuration register -# bit13-0: 0xc30, (3120 DDR2 clks refresh rate) -# bit23-14: 0x0, -# bit24: 0x1, enable exit self refresh mode on DDR access -# bit25: 0x1, required -# bit29-26: 0x0, -# bit31-30: 0x1, - -DATA 0xffd01404 0x37543000 # DDR Controller Control Low -# bit4: 0x0, addr/cmd in smame cycle -# bit5: 0x0, clk is driven during self refresh, we don't care for APX -# bit6: 0x0, use recommended falling edge of clk for addr/cmd -# bit14: 0x0, input buffer always powered up -# bit18: 0x1, cpu lock transaction enabled -# bit23-20: 0x5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 -# bit27-24: 0x7, CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -# bit30-28: 0x3, required -# bit31: 0x0, no additional STARTBURST delay - -DATA 0xffd01408 0x22125451 # DDR Timing (Low) (active cycles value +1) -# bit3-0: TRAS lsbs -# bit7-4: TRCD -# bit11-8: TRP -# bit15-12: TWR -# bit19-16: TWTR -# bit20: TRAS msb -# bit23-21: 0x0 -# bit27-24: TRRD -# bit31-28: TRTP - -DATA 0xffd0140c 0x00000a33 # DDR Timing (High) -# bit6-0: TRFC -# bit8-7: TR2R -# bit10-9: TR2W -# bit12-11: TW2W -# bit31-13: 0x0, required - -DATA 0xffd01410 0x000000cc # DDR Address Control -# bit1-0: 00, Cs0width (x8) -# bit3-2: 11, Cs0size (1Gb) -# bit5-4: 00, Cs1width (x8) -# bit7-6: 11, Cs1size (1Gb) -# bit9-8: 00, Cs2width (nonexistent) -# bit11-10: 00, Cs2size (nonexistent) -# bit13-12: 00, Cs3width (nonexistent) -# bit15-14: 00, Cs3size (nonexistent) -# bit16: 0, Cs0AddrSel -# bit17: 0, Cs1AddrSel -# bit18: 0, Cs2AddrSel -# bit19: 0, Cs3AddrSel -# bit31-20: 0x0, required - -DATA 0xffd01414 0x00000000 # DDR Open Pages Control -# bit0: 0, OpenPage enabled -# bit31-1: 0x0, required - -DATA 0xffd01418 0x00000000 # DDR Operation -# bit3-0: 0x0, DDR cmd -# bit31-4: 0x0, required - -DATA 0xffd0141c 0x00000c52 # DDR Mode -# bit2-0: 0x2, BurstLen=2 required -# bit3: 0x0, BurstType=0 required -# bit6-4: 0x4, CL=5 -# bit7: 0x0, TestMode=0 normal -# bit8: 0x0, DLL reset=0 normal -# bit11-9: 0x6, auto-precharge write recovery ???????????? -# bit12: 0x0, PD must be zero -# bit31-13: 0x0, required - -DATA 0xffd01420 0x00000040 # DDR Extended Mode -# bit0: 0, DDR DLL enabled -# bit1: 0, DDR drive strenght normal -# bit2: 0, DDR ODT control lsd (disabled) -# bit5-3: 0x0, required -# bit6: 1, DDR ODT control msb, (disabled) -# bit9-7: 0x0, required -# bit10: 0, differential DQS enabled -# bit11: 0, required -# bit12: 0, DDR output buffer enabled -# bit31-13: 0x0, required - -DATA 0xffd01424 0x0000f17f # DDR Controller Control High -# bit2-0: 0x7, required -# bit3: 0x1, MBUS Burst Chop disabled -# bit6-4: 0x7, required -# bit7: 0x0, -# bit8: 0x1, add writepath sample stage, must be 1 for DDR freq >= 300MHz -# bit9: 0x0, no half clock cycle addition to dataout -# bit10: 0x0, 1/4 clock cycle skew enabled for addr/ctl signals -# bit11: 0x0, 1/4 clock cycle skew disabled for write mesh -# bit15-12: 0xf, required -# bit31-16: 0x0, required - -DATA 0xffd01428 0x00085520 # DDR2 ODT Read Timing (default values) -DATA 0xffd0147c 0x00008552 # DDR2 ODT Write Timing (default values) - -DATA 0xffd01500 0x00000000 # CS[0]n Base address to 0x0 -DATA 0xffd01504 0x0ffffff1 # CS[0]n Size -# bit0: 0x1, Window enabled -# bit1: 0x0, Write Protect disabled -# bit3-2: 0x0, CS0 hit selected -# bit23-4: 0xfffff, required -# bit31-24: 0x0f, Size (i.e. 256MB) - -DATA 0xffd01508 0x00000000 # CS[1]n Base address to 256Mb -DATA 0xffd0150c 0x00000000 # CS[1]n Size 256Mb Window enabled for CS1 - -DATA 0xffd01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xffd0151c 0x00000000 # CS[3]n Size, window disabled - -DATA 0xffd01494 0x00030000 # DDR ODT Control (Low) -# bit3-0: ODT0Rd, MODT[0] asserted during read from DRAM CS1 -# bit7-4: ODT0Rd, MODT[0] asserted during read from DRAM CS0 -# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1 -# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 - -DATA 0xffd01498 0x00000000 # DDR ODT Control (High) -# bit1-0: 0x0, ODT0 controlled by ODT Control (low) register above -# bit3-2: 0x1, ODT1 active NEVER! -# bit31-4: 0x0, required - -DATA 0xffd0149c 0x0000e803 # CPU ODT Control -DATA 0xffd01480 0x00000001 # DDR Initialization Control -# bit0: 0x1, enable DDR init upon this register write - -# End of Header extension -DATA 0x0 0x0 diff --git a/package/boot/uboot-kirkwood/files/include/configs/iconnect.h b/package/boot/uboot-kirkwood/files/include/configs/iconnect.h deleted file mode 100644 index 59432f14d..000000000 --- a/package/boot/uboot-kirkwood/files/include/configs/iconnect.h +++ /dev/null @@ -1,124 +0,0 @@ -/* - * (C) Copyright 2009-2012 - * Wojciech Dubowik - * Luka Perkov - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifndef _CONFIG_ICONNECT_H -#define _CONFIG_ICONNECT_H - -/* - * Version number information - */ -#define CONFIG_IDENT_STRING " Iomega iConnect Wireless" - -/* - * High level configuration options - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KIRKWOOD /* SOC Family Name */ -#define CONFIG_KW88F6281 /* SOC Name */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ - -/* - * Machine type - */ -#define CONFIG_MACH_TYPE MACH_TYPE_ICONNECT - - -/* - * Commands configuration - */ -#define CONFIG_SYS_NO_FLASH /* declare no flash (NOR/SPI) */ -#define CONFIG_SYS_MVFS -#include -#define CONFIG_CMD_ENV -#define CONFIG_CMD_MII -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -#undef CONFIG_SYS_PROMPT -#define CONFIG_SYS_PROMPT "iconnect => " - -/* - * Environment variables configuration - */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_SECT_SIZE 0x20000 -#else -#define CONFIG_ENV_IS_NOWHERE -#endif -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_OFFSET 0xc0000 - -/* - * Default environment variables - */ -#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ - "${x_bootcmd_usb}; bootm 0x6400000;" - -#define CONFIG_MTDPARTS "orion_nand:1M(u-boot)," \ - "3M@1M(kernel),32M@4M(rootfs),475M@36M(data)\0" - -#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ - "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \ - "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ - "x_bootcmd_usb=usb start\0" \ - "x_bootargs_root=root=/dev/mtdblock2 rw rootfstype=jffs2\0" - -/* - * Ethernet driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 11 -#endif /* CONFIG_CMD_NET */ - -/* - * SATA driver configuration - */ -#ifdef CONFIG_CMD_IDE -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET -#endif /* CONFIG_CMD_IDE */ - -/* - * File system - */ -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS -#define CONFIG_RBTREE -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS -#define CONFIG_CMD_MTDPARTS - -#endif /* _CONFIG_ICONNECT_H */ diff --git a/package/boot/uboot-kirkwood/patches/0001-ib62x0.patch b/package/boot/uboot-kirkwood/patches/0001-ib62x0.patch deleted file mode 100644 index 0a7dc47a5..000000000 --- a/package/boot/uboot-kirkwood/patches/0001-ib62x0.patch +++ /dev/null @@ -1,542 +0,0 @@ -http://lists.denx.de/pipermail/u-boot/2012-April/122597.html -http://patchwork.ozlabs.org/patch/153293/ ---- - -diff --git a/MAINTAINERS b/MAINTAINERS -index 708ded7..9d2aba7 100644 ---- a/MAINTAINERS -+++ b/MAINTAINERS -@@ -777,6 +777,10 @@ Linus Walleij - integratorap various - integratorcp various - -+Luka Perkov -+ -+ ib62x0 ARM926EJS -+ - Dave Peverley - - omap730p2 ARM926EJS -diff --git a/board/raidsonic/ib62x0/Makefile b/board/raidsonic/ib62x0/Makefile -new file mode 100644 -index 0000000..d450f8d ---- /dev/null -+++ b/board/raidsonic/ib62x0/Makefile -@@ -0,0 +1,43 @@ -+# -+# (C) Copyright 2009 -+# Marvell Semiconductor -+# Written-by: Prafulla Wadaskar -+# -+# See file CREDITS for list of people who contributed to this -+# project. -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program. If not, see . -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = $(obj)lib$(BOARD).o -+ -+COBJS := ib62x0.o -+ -+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -+OBJS := $(addprefix $(obj),$(COBJS)) -+SOBJS := $(addprefix $(obj),$(SOBJS)) -+ -+$(LIB): $(obj).depend $(OBJS) $(SOBJS) -+ $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -+ -+######################################################################### -+ -+# defines $(obj).depend target -+include $(SRCTREE)/rules.mk -+ -+sinclude $(obj).depend -+ -+######################################################################### -diff --git a/board/raidsonic/ib62x0/ib62x0.c b/board/raidsonic/ib62x0/ib62x0.c -new file mode 100644 -index 0000000..65f2c2e ---- /dev/null -+++ b/board/raidsonic/ib62x0/ib62x0.c -@@ -0,0 +1,79 @@ -+/* -+ * Copyright (C) 2011-2012 -+ * Gerald Kerma -+ * Luka Perkov -+ * Simon Baatz -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include "ib62x0.h" -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+int board_early_init_f(void) -+{ -+ /* -+ * default gpio configuration -+ * There are maximum 64 gpios controlled through 2 sets of registers -+ * the below configuration configures mainly initial LED status -+ */ -+ kw_config_gpio(IB62x0_OE_VAL_LOW, -+ IB62x0_OE_VAL_HIGH, -+ IB62x0_OE_LOW, IB62x0_OE_HIGH); -+ -+ /* Multi-Purpose Pins Functionality configuration */ -+ u32 kwmpp_config[] = { -+ MPP0_NF_IO2, -+ MPP1_NF_IO3, -+ MPP2_NF_IO4, -+ MPP3_NF_IO5, -+ MPP4_NF_IO6, -+ MPP5_NF_IO7, -+ MPP6_SYSRST_OUTn, -+ MPP8_TW_SDA, -+ MPP9_TW_SCK, -+ MPP10_UART0_TXD, -+ MPP11_UART0_RXD, -+ MPP18_NF_IO0, -+ MPP19_NF_IO1, -+ MPP20_SATA1_ACTn, -+ MPP21_SATA0_ACTn, -+ MPP22_GPIO, /* Power LED red */ -+ MPP24_GPIO, /* Power off device */ -+ MPP25_GPIO, /* Power LED green */ -+ MPP27_GPIO, /* USB transfer LED */ -+ MPP28_GPIO, /* Reset button */ -+ MPP29_GPIO, /* USB Copy button */ -+ 0 -+ }; -+ kirkwood_mpp_conf(kwmpp_config); -+ return 0; -+} -+ -+int board_init(void) -+{ -+ /* adress of boot parameters */ -+ gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; -+ -+ return 0; -+} -diff --git a/board/raidsonic/ib62x0/ib62x0.h b/board/raidsonic/ib62x0/ib62x0.h -new file mode 100644 -index 0000000..0c30690 ---- /dev/null -+++ b/board/raidsonic/ib62x0/ib62x0.h -@@ -0,0 +1,40 @@ -+/* -+ * Copyright (C) 2011-2012 -+ * Gerald Kerma -+ * Simon Baatz -+ * Luka Perkov -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . -+ */ -+ -+#ifndef __IB62x0_H -+#define __IB62x0_H -+ -+#define IB62x0_OE_LOW (~(1 << 22 | 1 << 24 | 1 << 25 | 1 << 27)) -+#define IB62x0_OE_HIGH (~(0)) -+#define IB62x0_OE_VAL_LOW 0 -+#define IB62x0_OE_VAL_HIGH 0 -+ -+/* PHY related */ -+#define MV88E1116_LED_FCTRL_REG 10 -+#define MV88E1116_CPRSP_CR3_REG 21 -+#define MV88E1116_MAC_CTRL_REG 21 -+#define MV88E1116_PGADR_REG 22 -+#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) -+#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) -+ -+#endif /* __IB62x0_H */ -diff --git a/board/raidsonic/ib62x0/kwbimage.cfg b/board/raidsonic/ib62x0/kwbimage.cfg -new file mode 100644 -index 0000000..bd594eb ---- /dev/null -+++ b/board/raidsonic/ib62x0/kwbimage.cfg -@@ -0,0 +1,169 @@ -+# -+# Copyright (C) 2011-2012 -+# Gerald Kerma -+# Simon Baatz -+# Luka Perkov -+# -+# See file CREDITS for list of people who contributed to this -+# project. -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program. If not, see . -+# -+# Refer docs/README.kwimage for more details about how-to configure -+# and create kirkwood boot image -+# -+ -+# Boot Media configurations -+BOOT_FROM nand # change from nand to uart if building UART image -+NAND_ECC_MODE default -+NAND_PAGE_SIZE 0x0800 -+ -+# SOC registers configuration using bootrom header extension -+# Maximum KWBIMAGE_MAX_CONFIG configurations allowed -+ -+# Configure RGMII-0 interface pad voltage to 1.8V -+DATA 0xffd100e0 0x1b1b1b9b -+ -+#Dram initalization for SINGLE x16 CL=5 @ 400MHz -+DATA 0xffd01400 0x43000c30 # DDR Configuration register -+# bit13-0: 0xc30, (3120 DDR2 clks refresh rate) -+# bit23-14: 0x0, -+# bit24: 0x1, enable exit self refresh mode on DDR access -+# bit25: 0x1, required -+# bit29-26: 0x0, -+# bit31-30: 0x1, -+ -+DATA 0xffd01404 0x37543000 # DDR Controller Control Low -+# bit4: 0x0, addr/cmd in smame cycle -+# bit5: 0x0, clk is driven during self refresh, we don't care for APX -+# bit6: 0x0, use recommended falling edge of clk for addr/cmd -+# bit14: 0x0, input buffer always powered up -+# bit18: 0x1, cpu lock transaction enabled -+# bit23-20: 0x5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 -+# bit27-24: 0x7, CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -+# bit30-28: 0x3, required -+# bit31: 0x0, no additional STARTBURST delay -+ -+DATA 0xffd01408 0x22125451 # DDR Timing (Low) (active cycles value +1) -+# bit3-0: TRAS lsbs -+# bit7-4: TRCD -+# bit11-8: TRP -+# bit15-12: TWR -+# bit19-16: TWTR -+# bit20: TRAS msb -+# bit23-21: 0x0 -+# bit27-24: TRRD -+# bit31-28: TRTP -+ -+DATA 0xffd0140c 0x00000a33 # DDR Timing (High) -+# bit6-0: TRFC -+# bit8-7: TR2R -+# bit10-9: TR2W -+# bit12-11: TW2W -+# bit31-13: 0x0, required -+ -+DATA 0xffd01410 0x0000000c # DDR Address Control -+# bit1-0: 00, Cs0width (x8) -+# bit3-2: 11, Cs0size (1Gb) -+# bit5-4: 00, Cs1width (x8) -+# bit7-6: 11, Cs1size (1Gb) -+# bit9-8: 00, Cs2width (nonexistent -+# bit11-10: 00, Cs2size (nonexistent -+# bit13-12: 00, Cs3width (nonexistent -+# bit15-14: 00, Cs3size (nonexistent -+# bit16: 0, Cs0AddrSel -+# bit17: 0, Cs1AddrSel -+# bit18: 0, Cs2AddrSel -+# bit19: 0, Cs3AddrSel -+# bit31-20: 0x0, required -+ -+DATA 0xffd01414 0x00000000 # DDR Open Pages Control -+# bit0: 0, OpenPage enabled -+# bit31-1: 0x0, required -+ -+DATA 0xffd01418 0x00000000 # DDR Operation -+# bit3-0: 0x0, DDR cmd -+# bit31-4: 0x0, required -+ -+DATA 0xffd0141c 0x00000c52 # DDR Mode -+# bit2-0: 0x2, BurstLen=2 required -+# bit3: 0x0, BurstType=0 required -+# bit6-4: 0x4, CL=5 -+# bit7: 0x0, TestMode=0 normal -+# bit8: 0x0, DLL reset=0 normal -+# bit11-9: 0x6, auto-precharge write recovery ???????????? -+# bit12: 0x0, PD must be zero -+# bit31-13: 0x0, required -+ -+DATA 0xffd01420 0x00000040 # DDR Extended Mode -+# bit0: 0, DDR DLL enabled -+# bit1: 0, DDR drive strenght normal -+# bit2: 1, DDR ODT control lsd (disabled) -+# bit5-3: 0x0, required -+# bit6: 0, DDR ODT control msb, (disabled) -+# bit9-7: 0x0, required -+# bit10: 0, differential DQS enabled -+# bit11: 0, required -+# bit12: 0, DDR output buffer enabled -+# bit31-13: 0x0, required -+ -+DATA 0xffd01424 0x0000f17f # DDR Controller Control High -+# bit2-0: 0x7, required -+# bit3: 0x1, MBUS Burst Chop disabled -+# bit6-4: 0x7, required -+# bit7: 0x0, -+# bit8: 0x1, add writepath sample stage, must be 1 for DDR freq >= 300MHz -+# bit9: 0x0, no half clock cycle addition to dataout -+# bit10: 0x0, 1/4 clock cycle skew enabled for addr/ctl signals -+# bit11: 0x0, 1/4 clock cycle skew disabled for write mesh -+# bit15-12: 0xf, required -+# bit31-16: 0, required -+ -+DATA 0xffd01428 0x00085520 # DDR2 ODT Read Timing (default values) -+DATA 0xffd0147c 0x00008552 # DDR2 ODT Write Timing (default values) -+ -+DATA 0xffd01500 0x00000000 # CS[0]n Base address to 0x0 -+DATA 0xffd01504 0x0ffffff1 # CS[0]n Size -+# bit0: 0x1, Window enabled -+# bit1: 0x0, Write Protect disabled -+# bit3-2: 0x0, CS0 hit selected -+# bit23-4: 0xfffff, required -+# bit31-24: 0x0f, Size (i.e. 256MB) -+ -+DATA 0xffd01508 0x10000000 # CS[1]n Base address to 256Mb -+DATA 0xffd0150c 0x00000000 # CS[1]n Size, window disabled -+ -+DATA 0xffd01514 0x00000000 # CS[2]n Size, window disabled -+DATA 0xffd0151c 0x00000000 # CS[3]n Size, window disabled -+ -+DATA 0xffd01494 0x00030000 # DDR ODT Control (Low) -+# bit3-0: ODT0Rd, MODT[0] asserted during read from DRAM CS1 -+# bit7-4: ODT0Rd, MODT[0] asserted during read from DRAM CS0 -+# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1 -+# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 -+ -+DATA 0xffd01498 0x00000000 # DDR ODT Control (High) -+# bit1-0: 0x0, ODT0 controlled by ODT Control (low) register above -+# bit3-2: 0x1, ODT1 active NEVER! -+# bit31-4: 0x0, required -+ -+DATA 0xffd0149c 0x0000e803 # CPU ODT Control -+DATA 0xffd01480 0x00000001 # DDR Initialization Control -+# bit0: 0x1, enable DDR init upon this register write -+ -+DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register -+DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register -+ -+# End of Header extension -+DATA 0x0 0x0 -diff --git a/boards.cfg b/boards.cfg -index 3cf75c3..23f84e8 100644 ---- a/boards.cfg -+++ b/boards.cfg -@@ -153,6 +153,7 @@ openrd_client arm arm926ejs openrd Marvell - openrd_ultimate arm arm926ejs openrd Marvell kirkwood openrd:BOARD_IS_OPENRD_ULTIMATE - rd6281a arm arm926ejs - Marvell kirkwood - sheevaplug arm arm926ejs - Marvell kirkwood -+ib62x0 arm arm926ejs ib62x0 raidsonic kirkwood - dockstar arm arm926ejs - Seagate kirkwood - jadecpu arm arm926ejs jadecpu syteco mb86r0x - mx25pdk arm arm926ejs mx25pdk freescale mx25 mx25pdk:IMX_CONFIG=board/freescale/mx25pdk/imximage.cfg -diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h -new file mode 100644 -index 0000000..85856f2 ---- /dev/null -+++ b/include/configs/ib62x0.h -@@ -0,0 +1,150 @@ -+/* -+ * Copyright (C) 2011-2012 -+ * Gerald Kerma -+ * Luka Perkov -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . -+ */ -+ -+#ifndef _CONFIG_IB62x0_H -+#define _CONFIG_IB62x0_H -+ -+/* -+ * Version number information -+ */ -+#define CONFIG_IDENT_STRING " RaidSonic ICY BOX IB-NAS62x0" -+ -+/* -+ * High level configuration options -+ */ -+#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -+#define CONFIG_KIRKWOOD /* SOC Family Name */ -+#define CONFIG_KW88F6281 /* SOC Name */ -+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -+ -+/* -+ * Machine type -+ */ -+#define CONFIG_MACH_TYPE MACH_TYPE_NAS6210 -+ -+/* -+ * Compression configuration -+ */ -+#define CONFIG_BZIP2 -+#define CONFIG_LZMA -+#define CONFIG_LZO -+ -+/* -+ * Commands configuration -+ */ -+#define CONFIG_SYS_NO_FLASH /* declare no flash (NOR/SPI) */ -+#define CONFIG_SYS_MVFS -+#include -+#define CONFIG_CMD_ENV -+#define CONFIG_CMD_IDE -+#define CONFIG_CMD_MII -+#define CONFIG_CMD_NAND -+#define CONFIG_CMD_PING -+#define CONFIG_CMD_USB -+ -+/* -+ * mv-common.h should be defined after CMD configs since it used them -+ * to enable certain macros -+ */ -+#include "mv-common.h" -+ -+#undef CONFIG_SYS_PROMPT -+#define CONFIG_SYS_PROMPT "ib62x0 => " -+ -+/* -+ * Environment variables configuration -+ */ -+#ifdef CONFIG_CMD_NAND -+#define CONFIG_ENV_IS_IN_NAND -+#define CONFIG_ENV_SECT_SIZE 0x20000 -+#else -+#define CONFIG_ENV_IS_NOWHERE -+#endif -+#define CONFIG_ENV_SIZE 0x20000 -+#define CONFIG_ENV_OFFSET 0x80000 -+ -+/* -+ * Default environment variables -+ */ -+#define CONFIG_BOOTCOMMAND \ -+ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ -+ "ubi part rootfs; " \ -+ "ubifsmount rootfs; " \ -+ "ubifsload 0x800000 ${kernel}; " \ -+ "bootm 0x800000" -+ -+#define CONFIG_MTDPARTS \ -+ "mtdparts=orion_nand:" \ -+ "0x80000@0x0(uboot)," \ -+ "0x20000@0x80000(uboot_env)," \ -+ "-@0xa0000(rootfs)\0" -+ -+#define CONFIG_EXTRA_ENV_SETTINGS \ -+ "console=console=ttyS0,115200\0" \ -+ "mtdids=nand0=orion_nand\0" \ -+ "mtdparts="CONFIG_MTDPARTS \ -+ "kernel=/boot/uImage\0" \ -+ "bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0" -+ -+/* -+ * Ethernet driver configuration -+ */ -+#ifdef CONFIG_CMD_NET -+#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -+#define CONFIG_PHY_BASE_ADR 0 -+#undef CONFIG_RESET_PHY_R -+#endif /* CONFIG_CMD_NET */ -+ -+/* -+ * SATA driver configuration -+ */ -+#ifdef CONFIG_CMD_IDE -+#define __io -+#define CONFIG_IDE_PREINIT -+#define CONFIG_DOS_PARTITION -+#define CONFIG_MVSATA_IDE_USE_PORT0 -+#define CONFIG_MVSATA_IDE_USE_PORT1 -+#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -+#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET -+#endif /* CONFIG_CMD_IDE */ -+ -+/* -+ * RTC driver configuration -+ */ -+#ifdef CONFIG_CMD_DATE -+#define CONFIG_RTC_MV -+#endif /* CONFIG_CMD_DATE */ -+ -+/* -+ * File system -+ */ -+#define CONFIG_CMD_EXT2 -+#define CONFIG_CMD_FAT -+#define CONFIG_CMD_JFFS2 -+#define CONFIG_CMD_UBI -+#define CONFIG_CMD_UBIFS -+#define CONFIG_RBTREE -+#define CONFIG_MTD_DEVICE -+#define CONFIG_MTD_PARTITIONS -+#define CONFIG_CMD_MTDPARTS -+ -+#endif /* _CONFIG_IB62x0_H */ diff --git a/package/boot/uboot-kirkwood/patches/0002-kwboot.patch b/package/boot/uboot-kirkwood/patches/0002-kwboot.patch deleted file mode 100644 index 091d6a164..000000000 --- a/package/boot/uboot-kirkwood/patches/0002-kwboot.patch +++ /dev/null @@ -1,873 +0,0 @@ -http://lists.denx.de/pipermail/u-boot/2012-May/125296.html -http://patchwork.ozlabs.org/patch/161566/ ---- - -diff --git a/doc/kwboot.1 b/doc/kwboot.1 -new file mode 100644 -index 0000000..ed08398 ---- /dev/null -+++ b/doc/kwboot.1 -@@ -0,0 +1,84 @@ -+.TH KWBOOT 1 "2012-05-19" -+ -+.SH NAME -+kwboot \- Boot Marvell Kirkwood SoCs over a serial link. -+.SH SYNOPSIS -+.B kwboot -+.RB [ "-b \fIimage\fP" ] -+.RB [ "-p" ] -+.RB [ "-t" ] -+.RB [ "-B \fIbaudrate\fP" ] -+.RB \fITTY\fP -+.SH "DESCRIPTION" -+ -+The \fBmkimage\fP program boots boards based on Marvell's Kirkwood -+platform over their integrated UART. Boot image files will typically -+contain a second stage boot loader, such as U-Boot. The image file -+must conform to Marvell's BootROM firmware image format -+(\fIkwbimage\fP), created using a tool such as \fBmkimage\fP. -+ -+Following power-up or a system reset, system BootROM code polls the -+UART for a brief period of time, sensing a handshake message which -+initiates an image upload. This program sends this boot message until -+it receives a positive acknowledgement. The image is transfered using -+Xmodem. -+ -+Additionally, this program implements a minimal terminal mode, which -+can be used either standalone, or entered immediately following boot -+image transfer completion. This is often useful to catch early boot -+messages, or to manually interrupt a default boot procedure performed -+by the second-stage loader. -+ -+.SH "OPTIONS" -+ -+.TP -+.BI "\-b \fIimage\fP" -+Handshake; then upload file \fIimage\fP over \fITTY\fP. -+ -+Note that for the encapsulated boot code to be executed, \fIimage\fP -+must be of type "UART boot" (0x69). Boot images of different types, -+such as backup images of vendor firmware downloaded from flash memory -+(type 0x8B), will not work (or not as expected). See \fB-p\fP for a -+workaround. -+ -+This mode writes handshake status and upload progress indication to -+stdout. -+ -+.TP -+.BI "\-p" -+In combination with \fB-b\fP, patches the header in \fIimage\fP prior -+to upload, to "UART boot" type. -+ -+This option attempts on-the-fly conversion of some none-UART image -+types, such as images which were originally formatted to be stored in -+flash memory. -+ -+Conversion is performed in memory. The contents of \fIimage\fP will -+not be altered. -+ -+.TP -+.BI "\-t" -+Run a terminal program, connecting standard input and output to -+.RB \fITTY\fP. -+ -+If used in combination with \fB-b\fP, terminal mode is entered -+immediately following a successful image upload. -+ -+If standard I/O streams connect to a console, this mode will terminate -+after receiving 'ctrl-\\' followed by 'c' from console input. -+ -+.TP -+.BI "\-B \fIbaudrate\fP" -+Adjust the baud rate on \fITTY\fP. Default rate is 115200. -+ -+.SH "SEE ALSO" -+.PP -+\fBmkimage\fP(1) -+ -+.SH "AUTHORS" -+ -+Daniel Stodden -+.br -+Luka Perkov -+.br -+David Purdy -diff --git a/tools/Makefile b/tools/Makefile -index 8993fdd..8097d95 100644 ---- a/tools/Makefile -+++ b/tools/Makefile -@@ -72,6 +72,7 @@ BIN_FILES-$(CONFIG_SMDK5250) += mksmdk5250spl$(SFX) - BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX) - BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX) - BIN_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1$(SFX) -+BIN_FILES-$(CONFIG_KIRKWOOD) += kwboot$(SFX) - - # Source files which exist outside the tools directory - EXT_OBJ_FILES-$(CONFIG_BUILD_ENVCRC) += common/env_embedded.o -@@ -101,6 +102,7 @@ OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o - NOPED_OBJ_FILES-y += os_support.o - OBJ_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1.o - NOPED_OBJ_FILES-y += ublimage.o -+OBJ_FILES-$(CONFIG_KIRKWOOD) += kwboot.o - - # Don't build by default - #ifeq ($(ARCH),ppc) -@@ -234,6 +236,10 @@ $(obj)ncb$(SFX): $(obj)ncb.o - $(obj)ubsha1$(SFX): $(obj)os_support.o $(obj)sha1.o $(obj)ubsha1.o - $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ - -+$(obj)kwboot$(SFX): $(obj)kwboot.o -+ $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ -+ $(HOSTSTRIP) $@ -+ - # Some of the tool objects need to be accessed from outside the tools directory - $(obj)%.o: $(SRCTREE)/common/%.c - $(HOSTCC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $< -diff --git a/tools/kwboot.c b/tools/kwboot.c -new file mode 100644 -index 0000000..e773f01 ---- /dev/null -+++ b/tools/kwboot.c -@@ -0,0 +1,742 @@ -+/* -+ * Boot a Marvell Kirkwood SoC, with Xmodem over UART0. -+ * -+ * (c) 2012 Daniel Stodden -+ * -+ * References: marvell.com, "88F6180, 88F6190, 88F6192, and 88F6281 -+ * Integrated Controller: Functional Specifications" December 2, -+ * 2008. Chapter 24.2 "BootROM Firmware". -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "kwbimage.h" -+ -+#ifdef __GNUC__ -+#define PACKED __attribute((packed)) -+#else -+#define PACKED -+#endif -+ -+/* -+ * Marvell BootROM UART Sensing -+ */ -+ -+static unsigned char kwboot_msg_boot[] = { -+ 0xBB, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77 -+}; -+ -+#define KWBOOT_MSG_REQ_DELAY 10 /* ms */ -+#define KWBOOT_MSG_RSP_TIMEO 50 /* ms */ -+ -+/* -+ * Xmodem Transfers -+ */ -+ -+#define SOH 1 /* sender start of block header */ -+#define EOT 4 /* sender end of block transfer */ -+#define ACK 6 /* target block ack */ -+#define NAK 21 /* target block negative ack */ -+#define CAN 24 /* target/sender transfer cancellation */ -+ -+struct kwboot_block { -+ uint8_t soh; -+ uint8_t pnum; -+ uint8_t _pnum; -+ uint8_t data[128]; -+ uint8_t csum; -+} PACKED; -+ -+#define KWBOOT_BLK_RSP_TIMEO 1000 /* ms */ -+ -+static int kwboot_verbose; -+ -+static void -+kwboot_printv(const char *fmt, ...) -+{ -+ va_list ap; -+ -+ if (kwboot_verbose) { -+ va_start(ap, fmt); -+ vprintf(fmt, ap); -+ va_end(ap); -+ fflush(stdout); -+ } -+} -+ -+static void -+__spinner(void) -+{ -+ const char seq[] = { '-', '\\', '|', '/' }; -+ const int div = 8; -+ static int state, bs; -+ -+ if (state % div == 0) { -+ fputc(bs, stdout); -+ fputc(seq[state / div % sizeof(seq)], stdout); -+ fflush(stdout); -+ } -+ -+ bs = '\b'; -+ state++; -+} -+ -+static void -+kwboot_spinner(void) -+{ -+ if (kwboot_verbose) -+ __spinner(); -+} -+ -+static void -+__progress(int pct, char c) -+{ -+ const int width = 70; -+ static const char *nl = ""; -+ static int pos; -+ -+ if (pos % width == 0) -+ printf("%s%3d %% [", nl, pct); -+ -+ fputc(c, stdout); -+ -+ nl = "]\n"; -+ pos++; -+ -+ if (pct == 100) { -+ while (pos++ < width) -+ fputc(' ', stdout); -+ fputs(nl, stdout); -+ } -+ -+ fflush(stdout); -+ -+} -+ -+static void -+kwboot_progress(int _pct, char c) -+{ -+ static int pct; -+ -+ if (_pct != -1) -+ pct = _pct; -+ -+ if (kwboot_verbose) -+ __progress(pct, c); -+} -+ -+static int -+kwboot_tty_recv(int fd, void *buf, size_t len, int timeo) -+{ -+ int rc, nfds; -+ fd_set rfds; -+ struct timeval tv; -+ ssize_t n; -+ -+ rc = -1; -+ -+ FD_ZERO(&rfds); -+ FD_SET(fd, &rfds); -+ -+ tv.tv_sec = 0; -+ tv.tv_usec = timeo * 1000; -+ if (tv.tv_usec > 1000000) { -+ tv.tv_sec += tv.tv_usec / 1000000; -+ tv.tv_usec %= 1000000; -+ } -+ -+ do { -+ nfds = select(fd + 1, &rfds, NULL, NULL, &tv); -+ if (nfds < 0) -+ goto out; -+ if (!nfds) { -+ errno = ETIMEDOUT; -+ goto out; -+ } -+ -+ n = read(fd, buf, len); -+ if (n < 0) -+ goto out; -+ -+ buf = (char *)buf + n; -+ len -= n; -+ } while (len > 0); -+ -+ rc = 0; -+out: -+ return rc; -+} -+ -+static int -+kwboot_tty_send(int fd, const void *buf, size_t len) -+{ -+ int rc; -+ ssize_t n; -+ -+ rc = -1; -+ -+ do { -+ n = write(fd, buf, len); -+ if (n < 0) -+ goto out; -+ -+ buf = (char *)buf + n; -+ len -= n; -+ } while (len > 0); -+ -+ rc = tcdrain(fd); -+out: -+ return rc; -+} -+ -+static int -+kwboot_tty_send_char(int fd, unsigned char c) -+{ -+ return kwboot_tty_send(fd, &c, 1); -+} -+ -+static speed_t -+kwboot_tty_speed(int baudrate) -+{ -+ switch (baudrate) { -+ case 115200: -+ return B115200; -+ case 57600: -+ return B57600; -+ case 38400: -+ return B38400; -+ case 19200: -+ return B19200; -+ case 9600: -+ return B9600; -+ } -+ -+ return -1; -+} -+ -+static int -+kwboot_open_tty(const char *path, speed_t speed) -+{ -+ int rc, fd; -+ struct termios tio; -+ -+ rc = -1; -+ -+ fd = open(path, O_RDWR|O_NOCTTY|O_NDELAY); -+ if (fd < 0) -+ goto out; -+ -+ memset(&tio, 0, sizeof(tio)); -+ -+ tio.c_iflag = 0; -+ tio.c_cflag = CREAD|CLOCAL|CS8; -+ -+ tio.c_cc[VMIN] = 1; -+ tio.c_cc[VTIME] = 10; -+ -+ cfsetospeed(&tio, speed); -+ cfsetispeed(&tio, speed); -+ -+ rc = tcsetattr(fd, TCSANOW, &tio); -+ if (rc) -+ goto out; -+ -+ rc = fd; -+out: -+ if (rc < 0) { -+ if (fd >= 0) -+ close(fd); -+ } -+ -+ return rc; -+} -+ -+static int -+kwboot_bootmsg(int tty, void *msg) -+{ -+ int rc; -+ char c; -+ -+ kwboot_printv("Sending boot message. Please reboot the target..."); -+ -+ do { -+ rc = tcflush(tty, TCIOFLUSH); -+ if (rc) -+ break; -+ -+ rc = kwboot_tty_send(tty, msg, 8); -+ if (rc) { -+ usleep(KWBOOT_MSG_REQ_DELAY * 1000); -+ continue; -+ } -+ -+ rc = kwboot_tty_recv(tty, &c, 1, KWBOOT_MSG_RSP_TIMEO); -+ -+ kwboot_spinner(); -+ -+ } while (rc || c != NAK); -+ -+ kwboot_printv("\n"); -+ -+ return rc; -+} -+ -+static int -+kwboot_xm_makeblock(struct kwboot_block *block, const void *data, -+ size_t size, int pnum) -+{ -+ const size_t blksz = sizeof(block->data); -+ size_t n; -+ int i; -+ -+ block->pnum = pnum; -+ block->_pnum = ~block->pnum; -+ -+ n = size < blksz ? size : blksz; -+ memcpy(&block->data[0], data, n); -+ memset(&block->data[n], 0, blksz - n); -+ -+ block->csum = 0; -+ for (i = 0; i < n; i++) -+ block->csum += block->data[i]; -+ -+ return n; -+} -+ -+static int -+kwboot_xm_sendblock(int fd, struct kwboot_block *block) -+{ -+ int rc, retries; -+ char c; -+ -+ retries = 16; -+ do { -+ rc = kwboot_tty_send(fd, block, sizeof(*block)); -+ if (rc) -+ break; -+ -+ rc = kwboot_tty_recv(fd, &c, 1, KWBOOT_BLK_RSP_TIMEO); -+ if (rc) -+ break; -+ -+ if (c != ACK) -+ kwboot_progress(-1, '+'); -+ -+ } while (c == NAK && retries-- > 0); -+ -+ rc = -1; -+ -+ switch (c) { -+ case ACK: -+ rc = 0; -+ break; -+ case NAK: -+ errno = EBADMSG; -+ break; -+ case CAN: -+ errno = ECANCELED; -+ break; -+ default: -+ errno = EPROTO; -+ break; -+ } -+ -+ return rc; -+} -+ -+static int -+kwboot_xmodem(int tty, const void *_data, size_t size) -+{ -+ const uint8_t *data = _data; -+ int rc, pnum, N, err; -+ -+ pnum = 1; -+ N = 0; -+ -+ kwboot_printv("Sending boot image...\n"); -+ -+ do { -+ struct kwboot_block block; -+ int n; -+ -+ n = kwboot_xm_makeblock(&block, -+ data + N, size - N, -+ pnum++); -+ if (n < 0) -+ goto can; -+ -+ if (!n) -+ break; -+ -+ rc = kwboot_xm_sendblock(tty, &block); -+ if (rc) -+ goto out; -+ -+ N += n; -+ kwboot_progress(N * 100 / size, '.'); -+ } while (1); -+ -+ rc = kwboot_tty_send_char(tty, EOT); -+ -+out: -+ return rc; -+ -+can: -+ err = errno; -+ kwboot_tty_send_char(tty, CAN); -+ errno = err; -+ goto out; -+} -+ -+static int -+kwboot_term_pipe(int in, int out, char *quit, int *s) -+{ -+ ssize_t nin, nout; -+ char _buf[128], *buf = _buf; -+ -+ nin = read(in, buf, sizeof(buf)); -+ if (nin < 0) -+ return -1; -+ -+ if (quit) { -+ int i; -+ -+ for (i = 0; i < nin; i++) { -+ if (*buf == quit[*s]) { -+ (*s)++; -+ if (!quit[*s]) -+ return 0; -+ buf++; -+ nin--; -+ } else -+ while (*s > 0) { -+ nout = write(out, quit, *s); -+ if (nout <= 0) -+ return -1; -+ (*s) -= nout; -+ } -+ } -+ } -+ -+ while (nin > 0) { -+ nout = write(out, buf, nin); -+ if (nout <= 0) -+ return -1; -+ nin -= nout; -+ } -+ -+ return 0; -+} -+ -+static int -+kwboot_terminal(int tty) -+{ -+ int rc, in, s; -+ char *quit = "\34c"; -+ struct termios otio, tio; -+ -+ rc = -1; -+ -+ in = STDIN_FILENO; -+ if (isatty(in)) { -+ rc = tcgetattr(in, &otio); -+ if (!rc) { -+ tio = otio; -+ cfmakeraw(&tio); -+ rc = tcsetattr(in, TCSANOW, &tio); -+ } -+ if (rc) { -+ perror("tcsetattr"); -+ goto out; -+ } -+ -+ kwboot_printv("[Type Ctrl-%c + %c to quit]\r\n", -+ quit[0]|0100, quit[1]); -+ } else -+ in = -1; -+ -+ rc = 0; -+ s = 0; -+ -+ do { -+ fd_set rfds; -+ int nfds = 0; -+ -+ FD_SET(tty, &rfds); -+ nfds = nfds < tty ? tty : nfds; -+ -+ if (in >= 0) { -+ FD_SET(in, &rfds); -+ nfds = nfds < in ? in : nfds; -+ } -+ -+ nfds = select(nfds + 1, &rfds, NULL, NULL, NULL); -+ if (nfds < 0) -+ break; -+ -+ if (FD_ISSET(tty, &rfds)) { -+ rc = kwboot_term_pipe(tty, STDOUT_FILENO, NULL, NULL); -+ if (rc) -+ break; -+ } -+ -+ if (FD_ISSET(in, &rfds)) { -+ rc = kwboot_term_pipe(in, tty, quit, &s); -+ if (rc) -+ break; -+ } -+ } while (quit[s] != 0); -+ -+ tcsetattr(in, TCSANOW, &otio); -+out: -+ return rc; -+} -+ -+static void * -+kwboot_mmap_image(const char *path, size_t *size, int prot) -+{ -+ int rc, fd, flags; -+ struct stat st; -+ void *img; -+ -+ rc = -1; -+ fd = -1; -+ img = NULL; -+ -+ fd = open(path, O_RDONLY); -+ if (fd < 0) -+ goto out; -+ -+ rc = fstat(fd, &st); -+ if (rc) -+ goto out; -+ -+ flags = (prot & PROT_WRITE) ? MAP_PRIVATE : MAP_SHARED; -+ -+ img = mmap(NULL, st.st_size, prot, flags, fd, 0); -+ if (img == MAP_FAILED) { -+ img = NULL; -+ goto out; -+ } -+ -+ rc = 0; -+ *size = st.st_size; -+out: -+ if (rc && img) { -+ munmap(img, st.st_size); -+ img = NULL; -+ } -+ if (fd >= 0) -+ close(fd); -+ -+ return img; -+} -+ -+static uint8_t -+kwboot_img_csum8(void *_data, size_t size) -+{ -+ uint8_t *data = _data, csum; -+ -+ for (csum = 0; size-- > 0; data++) -+ csum += *data; -+ -+ return csum; -+} -+ -+static int -+kwboot_img_patch_hdr(void *img, size_t size) -+{ -+ int rc; -+ bhr_t *hdr; -+ uint8_t csum; -+ const size_t hdrsz = sizeof(*hdr); -+ -+ rc = -1; -+ hdr = img; -+ -+ if (size < hdrsz) { -+ errno = EINVAL; -+ goto out; -+ } -+ -+ csum = kwboot_img_csum8(hdr, hdrsz) - hdr->checkSum; -+ if (csum != hdr->checkSum) { -+ errno = EINVAL; -+ goto out; -+ } -+ -+ if (hdr->blockid == IBR_HDR_UART_ID) { -+ rc = 0; -+ goto out; -+ } -+ -+ hdr->blockid = IBR_HDR_UART_ID; -+ -+ hdr->nandeccmode = IBR_HDR_ECC_DISABLED; -+ hdr->nandpagesize = 0; -+ -+ hdr->srcaddr = hdr->ext -+ ? sizeof(struct kwb_header) -+ : sizeof(*hdr); -+ -+ hdr->checkSum = kwboot_img_csum8(hdr, hdrsz) - csum; -+ -+ rc = 0; -+out: -+ return rc; -+} -+ -+static void -+kwboot_usage(FILE *stream, char *progname) -+{ -+ fprintf(stream, -+ "Usage: %s -b [ -p ] [ -t ] " -+ "[-B ] \n", progname); -+ fprintf(stream, "\n"); -+ fprintf(stream, " -b : boot \n"); -+ fprintf(stream, " -p: patch to type 0x69 (uart boot)\n"); -+ fprintf(stream, "\n"); -+ fprintf(stream, " -t: mini terminal\n"); -+ fprintf(stream, "\n"); -+ fprintf(stream, " -B : set baud rate\n"); -+ fprintf(stream, "\n"); -+} -+ -+int -+main(int argc, char **argv) -+{ -+ const char *ttypath, *imgpath; -+ int rv, rc, tty, term, prot, patch; -+ void *bootmsg; -+ void *img; -+ size_t size; -+ speed_t speed; -+ -+ rv = 1; -+ tty = -1; -+ bootmsg = NULL; -+ imgpath = NULL; -+ img = NULL; -+ term = 0; -+ patch = 0; -+ size = 0; -+ speed = B115200; -+ -+ kwboot_verbose = isatty(STDOUT_FILENO); -+ -+ do { -+ int c = getopt(argc, argv, "hb:ptB:"); -+ if (c < 0) -+ break; -+ -+ switch (c) { -+ case 'b': -+ bootmsg = kwboot_msg_boot; -+ imgpath = optarg; -+ break; -+ -+ case 'p': -+ patch = 1; -+ break; -+ -+ case 't': -+ term = 1; -+ break; -+ -+ case 'B': -+ speed = kwboot_tty_speed(atoi(optarg)); -+ if (speed == -1) -+ goto usage; -+ break; -+ -+ case 'h': -+ rv = 0; -+ default: -+ goto usage; -+ } -+ } while (1); -+ -+ if (!bootmsg && !term) -+ goto usage; -+ -+ if (patch && !imgpath) -+ goto usage; -+ -+ if (argc - optind < 1) -+ goto usage; -+ -+ ttypath = argv[optind++]; -+ -+ tty = kwboot_open_tty(ttypath, speed); -+ if (tty < 0) { -+ perror(ttypath); -+ goto out; -+ } -+ -+ if (imgpath) { -+ prot = PROT_READ | (patch ? PROT_WRITE : 0); -+ -+ img = kwboot_mmap_image(imgpath, &size, prot); -+ if (!img) { -+ perror(imgpath); -+ goto out; -+ } -+ } -+ -+ if (patch) { -+ rc = kwboot_img_patch_hdr(img, size); -+ if (rc) { -+ fprintf(stderr, "%s: Invalid image.\n", imgpath); -+ goto out; -+ } -+ } -+ -+ if (bootmsg) { -+ rc = kwboot_bootmsg(tty, bootmsg); -+ if (rc) { -+ perror("bootmsg"); -+ goto out; -+ } -+ } -+ -+ if (img) { -+ rc = kwboot_xmodem(tty, img, size); -+ if (rc) { -+ perror("xmodem"); -+ goto out; -+ } -+ } -+ -+ if (term) { -+ rc = kwboot_terminal(tty); -+ if (rc && !(errno == EINTR)) { -+ perror("terminal"); -+ goto out; -+ } -+ } -+ -+ rv = 0; -+out: -+ if (tty >= 0) -+ close(tty); -+ -+ if (img) -+ munmap(img, size); -+ -+ return rv; -+ -+usage: -+ kwboot_usage(rv ? stderr : stdout, basename(argv[0])); -+ goto out; -+} diff --git a/package/boot/uboot-kirkwood/patches/0003-ide_bus.patch b/package/boot/uboot-kirkwood/patches/0003-ide_bus.patch deleted file mode 100644 index c94d63da9..000000000 --- a/package/boot/uboot-kirkwood/patches/0003-ide_bus.patch +++ /dev/null @@ -1,17 +0,0 @@ -http://lists.denx.de/pipermail/u-boot/2012-April/122594.html -http://patchwork.ozlabs.org/patch/159129/ ---- - -diff --git a/include/ide.h b/include/ide.h -index 8ecc9dd..385e909 100644 ---- a/include/ide.h -+++ b/include/ide.h -@@ -24,7 +24,7 @@ - #ifndef _IDE_H - #define _IDE_H - --#define IDE_BUS(dev) (dev >> 1) -+#define IDE_BUS(dev) (dev / (CONFIG_SYS_IDE_MAXDEVICE / CONFIG_SYS_IDE_MAXBUS)) - - #define ATA_CURR_BASE(dev) (CONFIG_SYS_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)]) - diff --git a/package/boot/uboot-kirkwood/patches/100-iconnect.patch b/package/boot/uboot-kirkwood/patches/100-iconnect.patch deleted file mode 100644 index d2f35ad5a..000000000 --- a/package/boot/uboot-kirkwood/patches/100-iconnect.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/boards.cfg -+++ b/boards.cfg -@@ -137,6 +137,7 @@ hawkboard_uart arm - enbw_cmc arm arm926ejs enbw_cmc enbw davinci - calimain arm arm926ejs calimain omicron davinci - dns325 arm arm926ejs - d-link kirkwood -+iconnect arm arm926ejs - iomega kirkwood - km_kirkwood arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_DISABLE_PCI - km_kirkwood_pci arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_RECONFIG_XLX - mgcoge3un arm arm926ejs km_arm keymile kirkwood