ar71xx: add mdio bus driver for the rtl8366 switch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18694 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/ar71xx/config-2.6.28

@@ -162,6 +162,7 @@ CONFIG_PHYLIB=y
 # CONFIG_PROBE_INITRD_HEADER is not set
 # CONFIG_R6040 is not set
 CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366_SMI=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_EXTENDED is not set

target/linux/ar71xx/config-2.6.30

@@ -166,6 +166,7 @@ CONFIG_PHYLIB=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PROBE_INITRD_HEADER is not set
 CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366_SMI=y
 CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_EXTENDED is not set

target/linux/ar71xx/config-2.6.31

@@ -169,6 +169,7 @@ CONFIG_PHYLIB=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PROBE_INITRD_HEADER is not set
 CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366_SMI=y
 CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_EXTENDED is not set

target/linux/ar71xx/config-2.6.32

@@ -173,6 +173,7 @@ CONFIG_PHYLIB=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PROBE_INITRD_HEADER is not set
 CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366_SMI=y
 CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_EXTENDED is not set

target/linux/ar71xx/files/drivers/net/phy/rtl8366_smi.c

@@ -0,0 +1,661 @@
+/*
+ * Platform driver for the Realtek RTL8366 ethernet switch
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>
+#include <linux/phy.h>
+#include <linux/rtl8366_smi.h>
+
+//#define DEBUG	1
+
+#define RTL8366_SMI_DRIVER_NAME	"rtl8366-smi"
+#define RTL8366_SMI_DRIVER_DESC	"Realtek RTL8366 switch driver"
+#define RTL8366_SMI_DRIVER_VER	"0.1.0"
+
+#define RTL8366S_PHY_NO_MAX		4
+#define RTL8366S_PHY_PAGE_MAX		7
+#define RTL8366S_PHY_ADDR_MAX		31
+
+#define RTL8366S_CHIP_VERSION_CTRL_REG	0x0104
+#define RTL8366S_CHIP_VERSION_MASK	0xf
+#define RTL8366S_CHIP_ID_REG		0x0105
+#define RTL8366S_CHIP_ID_8366		0x8366
+
+/* PHY registers control */
+#define RTL8366S_PHY_ACCESS_CTRL_REG	0x8028
+#define RTL8366S_PHY_ACCESS_DATA_REG	0x8029
+
+#define RTL8366S_PHY_CTRL_READ		1
+#define RTL8366S_PHY_CTRL_WRITE		0
+
+#define RTL8366S_PHY_REG_MASK		0x1f
+#define RTL8366S_PHY_PAGE_OFFSET	5
+#define RTL8366S_PHY_PAGE_MASK		(0x7 << 5)
+#define RTL8366S_PHY_NO_OFFSET		9
+#define RTL8366S_PHY_NO_MASK		(0x1f << 9)
+
+#define RTL8366_SMI_ACK_RETRY_COUNT	5
+#define RTL8366_SMI_CLK_DELAY		10 /* nsec */
+
+struct rtl8366_smi {
+	struct platform_device			*pdev;
+	struct rtl8366_smi_platform_data	*pdata;
+	spinlock_t				lock;
+	struct mii_bus				*mii_bus;
+	int					mii_irq[PHY_MAX_ADDR];
+};
+
+static inline void rtl8366_smi_clk_delay(struct rtl8366_smi *smi)
+{
+	ndelay(RTL8366_SMI_CLK_DELAY);
+}
+
+static void rtl8366_smi_start(struct rtl8366_smi *smi)
+{
+	unsigned int sda = smi->pdata->gpio_sda;
+	unsigned int sck = smi->pdata->gpio_sck;
+
+	/*
+	 * Set GPIO pins to output mode, with initial state:
+	 * SCK = 0, SDA = 1
+	 */
+	gpio_direction_output(sck, 0);
+	gpio_direction_output(sda, 1);
+	rtl8366_smi_clk_delay(smi);
+
+	/* CLK 1: 0 -> 1, 1 -> 0 */
+	gpio_set_value(sck, 1);
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sck, 0);
+	rtl8366_smi_clk_delay(smi);
+
+	/* CLK 2: */
+	gpio_set_value(sck, 1);
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sda, 0);
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sck, 0);
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sda, 1);
+}
+
+static void rtl8366_smi_stop(struct rtl8366_smi *smi)
+{
+	unsigned int sda = smi->pdata->gpio_sda;
+	unsigned int sck = smi->pdata->gpio_sck;
+
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sda, 0);
+	gpio_set_value(sck, 1);
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sda, 1);
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sck, 1);
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sck, 0);
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sck, 1);
+
+	/* add a click */
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sck, 0);
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sck, 1);
+
+	/* set GPIO pins to input mode */
+	gpio_direction_input(sda);
+	gpio_direction_input(sck);
+}
+
+static void rtl8366_smi_write_bits(struct rtl8366_smi *smi, u32 data, u32 len)
+{
+	unsigned int sda = smi->pdata->gpio_sda;
+	unsigned int sck = smi->pdata->gpio_sck;
+
+	for (; len > 0; len--) {
+		rtl8366_smi_clk_delay(smi);
+
+		/* prepare data */
+		if ( data & ( 1 << (len - 1)) )
+			gpio_set_value(sda, 1);
+		else
+			gpio_set_value(sda, 0);
+		rtl8366_smi_clk_delay(smi);
+
+		/* clocking */
+		gpio_set_value(sck, 1);
+		rtl8366_smi_clk_delay(smi);
+		gpio_set_value(sck, 0);
+	}
+}
+
+static void rtl8366_smi_read_bits(struct rtl8366_smi *smi, u32 len, u32 *data)
+{
+	unsigned int sda = smi->pdata->gpio_sda;
+	unsigned int sck = smi->pdata->gpio_sck;
+
+	gpio_direction_input(sda);
+
+	for (*data = 0; len > 0; len--) {
+		u32 u;
+
+		rtl8366_smi_clk_delay(smi);
+
+		/* clocking */
+		gpio_set_value(sck, 1);
+		rtl8366_smi_clk_delay(smi);
+		u = gpio_get_value(sda);
+		gpio_set_value(sck, 0);
+
+		*data |= (u << (len - 1));
+	}
+
+	gpio_direction_output(sda, 0);
+}
+
+static int rtl8366_smi_wait_for_ack(struct rtl8366_smi *smi)
+{
+	int retry_cnt;
+
+	retry_cnt = 0;
+	do {
+		u32 ack;
+
+		rtl8366_smi_read_bits(smi, 1, &ack);
+		if (ack == 0)
+			break;
+
+		if (++retry_cnt > RTL8366_SMI_ACK_RETRY_COUNT)
+			return -EIO;
+	} while (1);
+
+	return 0;
+}
+
+static int rtl8366_smi_write_byte(struct rtl8366_smi *smi, u8 data)
+{
+	rtl8366_smi_write_bits(smi, data, 8);
+	return rtl8366_smi_wait_for_ack(smi);
+}
+
+static int rtl8366_smi_read_byte0(struct rtl8366_smi *smi, u8 *data)
+{
+	u32 t;
+
+	/* read data */
+	rtl8366_smi_read_bits(smi, 8, &t);
+	*data = (t & 0xff);
+
+	/* send an ACK */
+	rtl8366_smi_write_bits(smi, 0x00, 1);
+
+	return 0;
+}
+
+static int rtl8366_smi_read_byte1(struct rtl8366_smi *smi, u8 *data)
+{
+	u32 t;
+
+	/* read data */
+	rtl8366_smi_read_bits(smi, 8, &t);
+	*data = (t & 0xff);
+
+	/* send an ACK */
+	rtl8366_smi_write_bits(smi, 0x01, 1);
+
+	return 0;
+}
+
+static int rtl8366_smi_read_reg(struct rtl8366_smi *smi, u32 addr, u32 *data)
+{
+	unsigned long flags;
+	u8 lo = 0;
+	u8 hi = 0;
+	int ret;
+
+	spin_lock_irqsave(&smi->lock, flags);
+
+	rtl8366_smi_start(smi);
+
+	/* send READ command */
+	ret = rtl8366_smi_write_byte(smi, 0x0a << 4 | 0x04 << 1 | 0x01);
+	if (ret)
+		goto out;
+
+	/* set ADDR[7:0] */
+	ret = rtl8366_smi_write_byte(smi, addr & 0xff);
+	if (ret)
+		goto out;
+
+	/* set ADDR[15:8] */
+	ret = rtl8366_smi_write_byte(smi, addr >> 8);
+	if (ret)
+		goto out;
+
+	/* read DATA[7:0] */
+	rtl8366_smi_read_byte0(smi, &lo);
+	/* read DATA[15:8] */
+	rtl8366_smi_read_byte1(smi, &hi);
+
+	*data = ((u32) lo) | (((u32) hi) << 8);
+
+	ret = 0;
+
+ out:
+	rtl8366_smi_stop(smi);
+	spin_unlock_irqrestore(&smi->lock, flags);
+
+	return ret;
+}
+
+static int rtl8366_smi_write_reg(struct rtl8366_smi *smi, u32 addr, u32 data)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&smi->lock, flags);
+
+	rtl8366_smi_start(smi);
+
+	/* send WRITE command */
+	ret = rtl8366_smi_write_byte(smi, 0x0a << 4 | 0x04 << 1 | 0x00);
+	if (ret)
+		goto out;
+
+	/* set ADDR[7:0] */
+	ret = rtl8366_smi_write_byte(smi, addr & 0xff);
+	if (ret)
+		goto out;
+
+	/* set ADDR[15:8] */
+	ret = rtl8366_smi_write_byte(smi, addr >> 8);
+	if (ret)
+		goto out;
+
+	/* write DATA[7:0] */
+	ret = rtl8366_smi_write_byte(smi, data & 0xff);
+	if (ret)
+		goto out;
+
+	/* write DATA[15:8] */
+	ret = rtl8366_smi_write_byte(smi, data >> 8);
+	if (ret)
+		goto out;
+
+	ret = 0;
+
+ out:
+	rtl8366_smi_stop(smi);
+	spin_unlock_irqrestore(&smi->lock, flags);
+
+	return ret;
+}
+
+static int rtl8366_smi_read_phy_reg(struct rtl8366_smi *smi,
+				    u32 phy_no, u32 page, u32 addr, u32 *data)
+{
+	u32 reg;
+	int ret;
+
+	if (phy_no > RTL8366S_PHY_NO_MAX)
+		return -EINVAL;
+
+	if (page > RTL8366S_PHY_PAGE_MAX)
+		return -EINVAL;
+
+	if (addr > RTL8366S_PHY_ADDR_MAX)
+		return -EINVAL;
+
+	ret = rtl8366_smi_write_reg(smi, RTL8366S_PHY_ACCESS_CTRL_REG,
+				    RTL8366S_PHY_CTRL_READ);
+	if (ret)
+		return ret;
+
+	reg = 0x8000 | (1 << (phy_no + RTL8366S_PHY_NO_OFFSET)) |
+	      ((page << RTL8366S_PHY_PAGE_OFFSET) & RTL8366S_PHY_PAGE_MASK) |
+	      (addr & RTL8366S_PHY_REG_MASK);
+
+	ret = rtl8366_smi_write_reg(smi, reg, 0);
+	if (ret)
+		return ret;
+
+	ret = rtl8366_smi_read_reg(smi, RTL8366S_PHY_ACCESS_DATA_REG, data);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int rtl8366_smi_write_phy_reg(struct rtl8366_smi *smi,
+				     u32 phy_no, u32 page, u32 addr, u32 data)
+{
+	u32 reg;
+	int ret;
+
+	if (phy_no > RTL8366S_PHY_NO_MAX)
+		return -EINVAL;
+
+	if (page > RTL8366S_PHY_PAGE_MAX)
+		return -EINVAL;
+
+	if (addr > RTL8366S_PHY_ADDR_MAX)
+		return -EINVAL;
+
+	ret = rtl8366_smi_write_reg(smi, RTL8366S_PHY_ACCESS_CTRL_REG,
+				    RTL8366S_PHY_CTRL_WRITE);
+	if (ret)
+		return ret;
+
+	reg = 0x8000 | (1 << (phy_no + RTL8366S_PHY_NO_OFFSET)) |
+	      ((page << RTL8366S_PHY_PAGE_OFFSET) & RTL8366S_PHY_PAGE_MASK) |
+	      (addr & RTL8366S_PHY_REG_MASK);
+
+	ret = rtl8366_smi_write_reg(smi, reg, data);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+#ifdef DEBUG
+static void rtl8366_smi_dump_regs(struct rtl8366_smi *smi)
+{
+	u32 t;
+	int err;
+	int i;
+
+	for (i = 0; i < 0x200; i++) {
+		err = rtl8366_smi_read_reg(smi, i, &t);
+		if (err) {
+			dev_err(&smi->pdev->dev,
+				"unable to read register %04x\n", i);
+			return;
+		}
+		dev_info(&smi->pdev->dev, "reg %04x: %04x\n", i, t);
+	}
+
+	for (i = 0; i <= RTL8366S_PHY_NO_MAX; i++) {
+		int j;
+
+		for (j = 0; j <= RTL8366S_PHY_ADDR_MAX; j++) {
+			err = rtl8366_smi_read_phy_reg(smi, i, 0, j, &t);
+			if (err) {
+				dev_err(&smi->pdev->dev,
+					"unable to read PHY%u:%02x register\n",
+					i, j);
+				return;
+			}
+			dev_info(&smi->pdev->dev,
+				 "PHY%u:%02x: %04x\n", i, j, t);
+		}
+	}
+}
+#else
+static inline void rtl8366_smi_dump_regs(struct rtl8366_smi *smi) {}
+#endif
+
+static int rtl8366_smi_mii_read(struct mii_bus *bus, int addr, int reg)
+{
+	struct rtl8366_smi *smi = bus->priv;
+	u32 val = 0;
+	int err;
+
+	err = rtl8366_smi_read_phy_reg(smi, addr, 0, reg, &val);
+	if (err)
+		return 0xffff;
+
+	return val;
+}
+
+static int rtl8366_smi_mii_write(struct mii_bus *bus, int addr, int reg,
+				     u16 val)
+{
+	struct rtl8366_smi *smi = bus->priv;
+	u32 t;
+	int err;
+
+	err = rtl8366_smi_write_phy_reg(smi, addr, 0, reg, val);
+	/* flush write */
+	(void) rtl8366_smi_read_phy_reg(smi, addr, 0, reg, &t);
+
+	return err;
+}
+
+static int rtl8366_smi_mii_init(struct rtl8366_smi *smi)
+{
+	int ret;
+	int i;
+
+	smi->mii_bus = mdiobus_alloc();
+	if (smi->mii_bus == NULL) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	spin_lock_init(&smi->lock);
+	smi->mii_bus->priv = (void *) smi;
+	smi->mii_bus->name = "rtl8366-smi";
+	smi->mii_bus->read = rtl8366_smi_mii_read;
+	smi->mii_bus->write = rtl8366_smi_mii_write;
+	snprintf(smi->mii_bus->id, MII_BUS_ID_SIZE, "%s",
+			dev_name(&smi->pdev->dev));
+	smi->mii_bus->parent = &smi->pdev->dev;
+	smi->mii_bus->phy_mask = ~(0x1f);
+	smi->mii_bus->irq = smi->mii_irq;
+	for (i = 0; i < PHY_MAX_ADDR; i++)
+		smi->mii_irq[i] = PHY_POLL;
+
+	rtl8366_smi_dump_regs(smi);
+
+	ret = mdiobus_register(smi->mii_bus);
+	if (ret)
+		goto err_free;
+
+	rtl8366_smi_dump_regs(smi);
+
+	return 0;
+
+ err_free:
+	mdiobus_free(smi->mii_bus);
+ err:
+	return ret;
+}
+
+static void rtl8366_smi_mii_cleanup(struct rtl8366_smi *smi)
+{
+	mdiobus_unregister(smi->mii_bus);
+	mdiobus_free(smi->mii_bus);
+}
+
+static int rtl8366_smi_setup(struct rtl8366_smi *smi)
+{
+	u32 chip_id = 0;
+	u32 chip_ver = 0;
+	int ret;
+
+	ret = rtl8366_smi_read_reg(smi, RTL8366S_CHIP_ID_REG, &chip_id);
+	if (ret) {
+		dev_err(&smi->pdev->dev, "unable to read chip id\n");
+		return ret;
+	}
+
+	switch (chip_id) {
+	case RTL8366S_CHIP_ID_8366:
+		break;
+	default:
+		dev_err(&smi->pdev->dev, "unknown chip id (%04x)\n", chip_id);
+		return -ENODEV;
+	}
+
+	ret = rtl8366_smi_read_reg(smi, RTL8366S_CHIP_VERSION_CTRL_REG,
+				   &chip_ver);
+	if (ret) {
+		dev_err(&smi->pdev->dev, "unable to read chip version\n");
+		return ret;
+	}
+
+	dev_info(&smi->pdev->dev, "RTL%04x ver. %u chip found\n",
+		 chip_id, chip_ver & RTL8366S_CHIP_VERSION_MASK);
+
+	return 0;
+}
+
+static int __init rtl8366_smi_probe(struct platform_device *pdev)
+{
+	static int rtl8366_smi_version_printed;
+	struct rtl8366_smi_platform_data *pdata;
+	struct rtl8366_smi *smi;
+	int err;
+
+	if (!rtl8366_smi_version_printed++)
+		printk(KERN_NOTICE RTL8366_SMI_DRIVER_DESC
+		       " version " RTL8366_SMI_DRIVER_VER"\n");
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data specified\n");
+		err = -EINVAL;
+		goto err_out;
+	}
+
+	smi = kzalloc(sizeof(struct rtl8366_smi), GFP_KERNEL);
+	if (!smi) {
+		dev_err(&pdev->dev, "no memory for private data\n");
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	err = gpio_request(pdata->gpio_sda, dev_name(&pdev->dev));
+	if (err) {
+		dev_err(&pdev->dev, "gpio_request failed for %u, err=%d\n",
+			pdata->gpio_sda, err);
+		goto err_free_smi;
+	}
+
+	err = gpio_request(pdata->gpio_sck, dev_name(&pdev->dev));
+	if (err) {
+		dev_err(&pdev->dev, "gpio_request failed for %u, err=%d\n",
+			pdata->gpio_sck, err);
+		goto err_free_sda;
+	}
+
+	smi->pdev = pdev;
+	smi->pdata = pdata;
+	spin_lock_init(&smi->lock);
+
+	platform_set_drvdata(pdev, smi);
+
+	dev_info(&pdev->dev, "using GPIO pins %u (SDA) and %u (SCK)\n",
+		 pdata->gpio_sda, pdata->gpio_sck);
+
+	err = rtl8366_smi_setup(smi);
+	if (err)
+		goto err_clear_drvdata;
+
+	err = rtl8366_smi_mii_init(smi);
+	if (err)
+		goto err_clear_drvdata;
+
+	return 0;
+
+ err_clear_drvdata:
+	platform_set_drvdata(pdev, NULL);
+	gpio_free(pdata->gpio_sck);
+ err_free_sda:
+	gpio_free(pdata->gpio_sda);
+ err_free_smi:
+	kfree(smi);
+ err_out:
+	return err;
+}
+
+static int __devexit rtl8366_smi_remove(struct platform_device *pdev)
+{
+	struct rtl8366_smi *smi = platform_get_drvdata(pdev);
+
+	if (smi) {
+		struct rtl8366_smi_platform_data *pdata;
+
+		pdata = pdev->dev.platform_data;
+
+		rtl8366_smi_mii_cleanup(smi);
+		platform_set_drvdata(pdev, NULL);
+		gpio_free(pdata->gpio_sck);
+		gpio_free(pdata->gpio_sda);
+		kfree(smi);
+	}
+
+	return 0;
+}
+
+int rtl8366_phy_config_aneg(struct phy_device *phydev)
+{
+	return 0;
+}
+
+static struct platform_driver rtl8366_smi_driver = {
+	.driver = {
+		.name		= RTL8366_SMI_DRIVER_NAME,
+		.owner		= THIS_MODULE,
+	},
+	.probe		= rtl8366_smi_probe,
+	.remove		= __devexit_p(rtl8366_smi_remove),
+};
+
+static struct phy_driver rtl8366_smi_phy_driver = {
+	.phy_id		= 0x001cc960,
+	.name		= "Realtek RTL8366",
+	.phy_id_mask	= 0x1ffffff0,
+	.features	= PHY_GBIT_FEATURES,
+	.config_aneg	= rtl8366_phy_config_aneg,
+	.read_status	= genphy_read_status,
+	.driver		= {
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init rtl8366_smi_init(void)
+{
+	int ret;
+
+	ret = phy_driver_register(&rtl8366_smi_phy_driver);
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&rtl8366_smi_driver);
+	if (ret)
+		goto err_phy_unregister;
+
+	return 0;
+
+ err_phy_unregister:
+	phy_driver_unregister(&rtl8366_smi_phy_driver);
+	return ret;
+}
+module_init(rtl8366_smi_init);
+
+static void __exit rtl8366_smi_exit(void)
+{
+	platform_driver_unregister(&rtl8366_smi_driver);
+	phy_driver_unregister(&rtl8366_smi_phy_driver);
+}
+module_exit(rtl8366_smi_exit);
+
+MODULE_DESCRIPTION(RTL8366_SMI_DRIVER_DESC);
+MODULE_VERSION(RTL8366_SMI_DRIVER_VER);
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" RTL8366_SMI_DRIVER_NAME);

target/linux/ar71xx/files/include/linux/rtl8366_smi.h

@@ -0,0 +1,19 @@
+/*
+ * Platform data definition for the Realtek RTL8366 ethernet switch driver
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RTL8366_SMI_H
+#define _RTL8366_SMI_H
+
+struct rtl8366_smi_platform_data {
+	unsigned	gpio_sda;
+	unsigned	gpio_sck;
+};
+
+#endif /*  _RTL8366_SMI_H */

target/linux/ar71xx/patches-2.6.28/204-rtl8366-smi-driver.patch

@@ -0,0 +1,21 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -114,4 +114,8 @@ config MDIO_OF_GPIO
+ 	---help---
+ 	  Supports GPIO lib-based MDIO busses.
+ 
++config RTL8366_SMI
++	tristate "Support for RTL8366 switch via SMI interface"
++	depends on GENERIC_GPIO
++
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
+ obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
++obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
+ obj-$(CONFIG_MICREL_PHY)	+= micrel.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o

target/linux/ar71xx/patches-2.6.30/204-rtl8366-smi-driver.patch

@@ -0,0 +1,21 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -140,4 +140,8 @@ config MDIO_GPIO
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called mdio-gpio.
+ 
++config RTL8366_SMI
++	tristate "Support for RTL8366 switch via SMI interface"
++	depends on GENERIC_GPIO
++
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
+ obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
++obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_MICREL)		+= micrel.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o

target/linux/ar71xx/patches-2.6.31/204-rtl8366-smi-driver.patch

@@ -0,0 +1,21 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -140,4 +140,8 @@ config MDIO_GPIO
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called mdio-gpio.
+ 
++config RTL8366_SMI
++	tristate "Support for RTL8366 switch via SMI interface"
++	depends on GENERIC_GPIO
++
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
+ obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
++obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_MICREL)		+= micrel.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o

target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch

@@ -0,0 +1,21 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -146,4 +146,8 @@ config MDIO_GPIO
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called mdio-gpio.
+ 
++config RTL8366_SMI
++	tristate "Support for RTL8366 switch via SMI interface"
++	depends on GENERIC_GPIO
++
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -20,6 +20,7 @@ obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
+ obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
++obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_MICREL)		+= micrel.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o