1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-01 01:04:04 +02:00

[ixp4xx] add switch support to the npe driver

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10966 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
juhosg 2008-04-28 18:44:50 +00:00
parent bad69e0b70
commit c264ce3344
2 changed files with 296 additions and 0 deletions

View File

@ -0,0 +1,252 @@
Index: linux-2.6.24.2/drivers/net/arm/ixp4xx_eth.c
===================================================================
--- linux-2.6.24.2.orig/drivers/net/arm/ixp4xx_eth.c
+++ linux-2.6.24.2/drivers/net/arm/ixp4xx_eth.c
@@ -165,14 +165,15 @@ struct port {
struct net_device *netdev;
struct napi_struct napi;
struct net_device_stats stat;
- struct mii_if_info mii;
+ struct mii_if_info mii[IXP4XX_ETH_PHY_MAX_ADDR];
struct delayed_work mdio_thread;
struct eth_plat_info *plat;
buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
struct desc *desc_tab; /* coherent */
u32 desc_tab_phys;
int id; /* logical port ID */
- u16 mii_bmcr;
+ u16 mii_bmcr[IXP4XX_ETH_PHY_MAX_ADDR];
+ int phy_count;
};
/* NPE message structure */
@@ -316,13 +317,14 @@ static void mdio_write(struct net_device
spin_unlock_irqrestore(&mdio_lock, flags);
}
-static void phy_reset(struct net_device *dev, int phy_id)
+static void phy_reset(struct net_device *dev, int idx)
{
struct port *port = netdev_priv(dev);
+ int phy_id = port->mii[idx].phy_id;
int cycles = 0;
- mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr | BMCR_RESET);
-
+ mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr[idx] | BMCR_RESET);
+
while (cycles < MAX_MII_RESET_RETRIES) {
if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) {
#if DEBUG_MDIO
@@ -335,12 +337,12 @@ static void phy_reset(struct net_device
cycles++;
}
- printk(KERN_ERR "%s: MII reset failed\n", dev->name);
+ printk(KERN_ERR "%s: MII reset failed on PHY%2d\n", dev->name, phy_id);
}
-static void eth_set_duplex(struct port *port)
+static void eth_set_duplex(struct port *port, int full_duplex)
{
- if (port->mii.full_duplex)
+ if (full_duplex)
__raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
&port->regs->tx_control[0]);
else
@@ -348,7 +350,7 @@ static void eth_set_duplex(struct port *
&port->regs->tx_control[0]);
}
-
+#if 0
static void phy_check_media(struct port *port, int init)
{
if (mii_check_media(&port->mii, 1, init))
@@ -367,7 +369,63 @@ static void phy_check_media(struct port
}
}
}
+#else
+static void phy_update_link(struct net_device *dev, int link)
+{
+ int prev_link = netif_carrier_ok(dev);
+
+ if (!prev_link && link) {
+ printk(KERN_INFO "%s: link up\n", dev->name);
+ netif_carrier_on(dev);
+ } else if (prev_link && !link) {
+ printk(KERN_INFO "%s: link down\n", dev->name);
+ netif_carrier_off(dev);
+ }
+}
+
+static void phy_check_media(struct port *port, int init)
+{
+ struct net_device *dev = port->netdev;
+
+ if (port->phy_count == 1) {
+ struct mii_if_info *mii = &port->mii[0];
+
+ if (mii_check_media(mii, 1, init))
+ eth_set_duplex(port, mii->full_duplex);
+
+ if (mii->force_media) /* mii_check_media() doesn't work */
+ phy_update_link(dev, mii_link_ok(mii));
+ } else {
+ int cur_link = 0;
+ int i;
+
+ if (init)
+ eth_set_duplex(port, 1);
+
+ for (i = 0; i < port->phy_count; i++)
+ cur_link |= mii_link_ok(&port->mii[i]);
+
+ phy_update_link(dev, cur_link);
+ }
+}
+#endif
+static void phy_power_down(struct net_device *dev, int idx)
+{
+ struct port *port = netdev_priv(dev);
+ int phy_id = port->mii[idx].phy_id;
+
+ port->mii_bmcr[idx] = mdio_read(dev, phy_id, MII_BMCR) &
+ ~(BMCR_RESET | BMCR_PDOWN);
+ mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr[idx] | BMCR_PDOWN);
+}
+
+static void phy_power_up(struct net_device *dev, int idx)
+{
+ struct port *port = netdev_priv(dev);
+
+ mdio_write(dev, port->mii[idx].phy_id, MII_BMCR, port->mii_bmcr[idx]);
+}
static void mdio_thread(struct work_struct *work)
{
@@ -790,9 +848,12 @@ static int eth_ioctl(struct net_device *
if (!netif_running(dev))
return -EINVAL;
- err = generic_mii_ioctl(&port->mii, if_mii(req), cmd, &duplex_chg);
+ if (port->phy_count != 1)
+ return -EOPNOTSUPP;
+
+ err = generic_mii_ioctl(&port->mii[0], if_mii(req), cmd, &duplex_chg);
if (duplex_chg)
- eth_set_duplex(port);
+ eth_set_duplex(port, port->mii[0].full_duplex);
return err;
}
@@ -944,7 +1005,8 @@ static int eth_open(struct net_device *d
}
}
- mdio_write(dev, port->plat->phy, MII_BMCR, port->mii_bmcr);
+ for (i = 0; i < port->phy_count; i++)
+ phy_power_up(dev, i);
memset(&msg, 0, sizeof(msg));
msg.cmd = NPE_VLAN_SETRXQOSENTRY;
@@ -1103,10 +1165,8 @@ static int eth_close(struct net_device *
printk(KERN_CRIT "%s: unable to disable loopback\n",
dev->name);
- port->mii_bmcr = mdio_read(dev, port->plat->phy, MII_BMCR) &
- ~(BMCR_RESET | BMCR_PDOWN); /* may have been altered */
- mdio_write(dev, port->plat->phy, MII_BMCR,
- port->mii_bmcr | BMCR_PDOWN);
+ for (i = 0; i < port->phy_count; i++)
+ phy_power_down(dev, i);
if (!ports_open)
qmgr_disable_irq(TXDONE_QUEUE);
@@ -1117,6 +1177,42 @@ static int eth_close(struct net_device *
return 0;
}
+static void eth_add_phy(struct net_device *dev, int phy_id)
+{
+ struct port *port = netdev_priv(dev);
+ int i;
+
+ i = port->phy_count++;
+
+ port->mii[i].dev = dev;
+ port->mii[i].mdio_read = mdio_read;
+ port->mii[i].mdio_write = mdio_write;
+ port->mii[i].phy_id = phy_id;
+ port->mii[i].phy_id_mask = 0x1F;
+ port->mii[i].reg_num_mask = 0x1F;
+
+ printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, phy_id,
+ npe_name(port->npe));
+
+ phy_reset(dev, i);
+ phy_power_down(dev, i);
+}
+
+static void eth_init_mii(struct net_device *dev)
+{
+ struct port *port = netdev_priv(dev);
+
+ if (port->plat->phy < IXP4XX_ETH_PHY_MAX_ADDR) {
+ eth_add_phy(dev, port->plat->phy);
+ } else {
+ int i;
+ for (i = 0; i < IXP4XX_ETH_PHY_MAX_ADDR; i++)
+ if (port->plat->phy_mask & (1U << i))
+ eth_add_phy(dev, i);
+ }
+
+}
+
static int __devinit eth_init_one(struct platform_device *pdev)
{
struct port *port;
@@ -1189,20 +1285,7 @@ static int __devinit eth_init_one(struct
__raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
udelay(50);
- port->mii.dev = dev;
- port->mii.mdio_read = mdio_read;
- port->mii.mdio_write = mdio_write;
- port->mii.phy_id = plat->phy;
- port->mii.phy_id_mask = 0x1F;
- port->mii.reg_num_mask = 0x1F;
-
- printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
- npe_name(port->npe));
-
- phy_reset(dev, plat->phy);
- port->mii_bmcr = mdio_read(dev, plat->phy, MII_BMCR) &
- ~(BMCR_RESET | BMCR_PDOWN);
- mdio_write(dev, plat->phy, MII_BMCR, port->mii_bmcr | BMCR_PDOWN);
+ eth_init_mii(dev);
INIT_DELAYED_WORK(&port->mdio_thread, mdio_thread);
return 0;
Index: linux-2.6.24.2/include/asm-arm/arch-ixp4xx/platform.h
===================================================================
--- linux-2.6.24.2.orig/include/asm-arm/arch-ixp4xx/platform.h
+++ linux-2.6.24.2/include/asm-arm/arch-ixp4xx/platform.h
@@ -106,12 +106,15 @@ struct sys_timer;
#define IXP4XX_ETH_NPEB 0x10
#define IXP4XX_ETH_NPEC 0x20
+#define IXP4XX_ETH_PHY_MAX_ADDR 32
+
/* Information about built-in Ethernet MAC interfaces */
struct eth_plat_info {
u8 phy; /* MII PHY ID, 0 - 31 */
u8 rxq; /* configurable, currently 0 - 31 only */
u8 txreadyq;
u8 hwaddr[6];
+ u32 phy_mask;
};
/* Information about built-in HSS (synchronous serial) interfaces */

View File

@ -0,0 +1,44 @@
Index: linux-2.6.24.2/drivers/net/arm/ixp4xx_eth.c
===================================================================
--- linux-2.6.24.2.orig/drivers/net/arm/ixp4xx_eth.c
+++ linux-2.6.24.2/drivers/net/arm/ixp4xx_eth.c
@@ -322,8 +322,12 @@ static void phy_reset(struct net_device
struct port *port = netdev_priv(dev);
int phy_id = port->mii[idx].phy_id;
int cycles = 0;
+ u16 bmcr;
- mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr[idx] | BMCR_RESET);
+ /* reset the PHY */
+ bmcr = mdio_read(dev, phy_id, MII_BMCR);
+ bmcr |= BMCR_ANENABLE;
+ mdio_write(dev, phy_id, MII_BMCR, bmcr | BMCR_RESET);
while (cycles < MAX_MII_RESET_RETRIES) {
if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) {
@@ -331,13 +335,23 @@ static void phy_reset(struct net_device
printk(KERN_DEBUG "%s: phy_reset() took %i cycles\n",
dev->name, cycles);
#endif
- return;
+ break;
}
udelay(1);
cycles++;
}
- printk(KERN_ERR "%s: MII reset failed on PHY%2d\n", dev->name, phy_id);
+ if (cycles == MAX_MII_RESET_RETRIES) {
+ printk(KERN_ERR "%s: MII reset failed on PHY%2d\n", dev->name,
+ phy_id);
+ return;
+ }
+
+ /* restart auto negotiation */
+ bmcr = mdio_read(dev, phy_id, MII_BMCR);
+ bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ mdio_write(dev, phy_id, MII_BMCR, bmcr);
+
}
static void eth_set_duplex(struct port *port, int full_duplex)