[mac80211] update compat-wireless to 2009-05-21

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15976 3c298f89-4303-0410-b956-a3cf2f4a3e73

package/mac80211/Makefile

@@ -17,12 +17,12 @@ ifneq ($(CONFIG_LINUX_2_6_21)$(CONFIG_LINUX_2_6_23)$(CONFIG_LINUX_2_6_24)$(CONFI
   PKG_MD5SUM:=9563ceeed86bca0859ad5f010623277c
   PATCH_DIR:=./patches-old
 else
-  PKG_VERSION:=2009-05-08
+  PKG_VERSION:=2009-05-21
   PKG_RELEASE:=1
   PKG_SOURCE_URL:= \
 	http://www.orbit-lab.org/kernel/compat-wireless-2.6/2009/05 \
 	http://wireless.kernel.org/download/compat-wireless-2.6
-  PKG_MD5SUM:=9e973ca21e20e51f0a3c215c980b1f55
+  PKG_MD5SUM:=9d15b1d02c7ab48e96ec2f3f9b336e66
 endif
 
 PKG_SOURCE:=compat-wireless-$(PKG_VERSION).tar.bz2

package/mac80211/patches/007-remove_unused_stuff.patch

@@ -146,7 +146,7 @@
  
  CONFIG_RT2X00_LIB_PCI=m
  CONFIG_RT2400PCI=m
-@@ -227,16 +227,16 @@ CONFIG_RT61PCI=m
+@@ -227,24 +227,24 @@ CONFIG_RT61PCI=m
  NEED_RT2X00_FIRMWARE=y
  endif
  
@@ -161,13 +161,23 @@
  endif
  ## end of PCI
  
+ ifneq ($(CONFIG_PCMCIA),)
+ 
+-CONFIG_LIBERTAS_CS=m
+-NEED_LIBERTAS=y
++# CONFIG_LIBERTAS_CS=m
++# NEED_LIBERTAS=y
+ 
+ endif
+ ## end of PCMCIA
+ 
  # This is required for some cards
 -CONFIG_EEPROM_93CX6=m
 +# CONFIG_EEPROM_93CX6=m
  
  # USB Drivers
  ifneq ($(CONFIG_USB),)
-@@ -250,21 +250,21 @@ CONFIG_ZD1211RW=m
+@@ -258,21 +258,21 @@ CONFIG_ZD1211RW=m
  # is only wireless RNDIS chip known to date.
  # Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
  # it also requires new RNDIS_HOST and CDC_ETHER modules which we add
@@ -196,7 +206,40 @@
  endif
  
  # RT2500USB does not require firmware
-@@ -306,20 +306,20 @@ CONFIG_ATH_COMMON=m
+@@ -286,24 +286,24 @@ CONFIG_RT73USB=m
+ NEED_RT2X00_FIRMWARE=y
+ endif
+ 
+-CONFIG_LIBERTAS_THINFIRM_USB=m
+-CONFIG_LIBERTAS_USB=m
+-NEED_LIBERTAS=y
++# CONFIG_LIBERTAS_THINFIRM_USB=m
++# CONFIG_LIBERTAS_USB=m
++# NEED_LIBERTAS=y
+ 
+ endif # end of USB driver list
+ 
+ ifneq ($(CONFIG_SPI_MASTER),)
+ 
+-CONFIG_WL12XX=m
+-CONFIG_LIBERTAS_SPI=m
+-NEED_LIBERTAS=y
++# CONFIG_WL12XX=m
++# CONFIG_LIBERTAS_SPI=m
++# NEED_LIBERTAS=y
+ 
+ endif # end of SPI driver list
+ 
+ ifneq ($(CONFIG_MMC),)
+ 
+-CONFIG_LIBERTAS_SDIO=m
+-NEED_LIBERTAS=y
++# CONFIG_LIBERTAS_SDIO=m
++# NEED_LIBERTAS=y
+ 
+ endif # end of SDIO driver list
+ 
+@@ -333,13 +333,13 @@ CONFIG_ATH_COMMON=m
  
  
  # Sonics Silicon Backplane
@@ -208,19 +251,9 @@
 +# CONFIG_SSB_SPROM=y
  # CONFIG_SSB_DEBUG=y
  
- ifneq ($(CONFIG_USB),)
- ifneq ($(CONFIG_LIBERTAS_THINFIRM_USB),m)
--CONFIG_LIBERTAS_USB=m
--NEED_LIBERTAS=y
-+# CONFIG_LIBERTAS_USB=m
-+# NEED_LIBERTAS=y
- endif
- endif
- ifneq ($(CONFIG_PCMCIA),)
--CONFIG_LIBERTAS_CS=m
--NEED_LIBERTAS=y
-+# CONFIG_LIBERTAS_CS=m
-+# NEED_LIBERTAS=y
- endif
  ifeq ($(NEED_LIBERTAS),y)
+-CONFIG_LIBERTAS_THINFIRM=m
++# CONFIG_LIBERTAS_THINFIRM=m
  CONFIG_LIBERTAS=m
+ # CONFIG_LIBERTAS_DEBUG=y
+ endif

package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/main.c
 +++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -1020,6 +1020,9 @@ static void ath_unregister_led(struct at
+@@ -1034,6 +1034,9 @@ static void ath_unregister_led(struct at
  
  static void ath_deinit_leds(struct ath_softc *sc)
  {
@@ -10,7 +10,7 @@
  	cancel_delayed_work_sync(&sc->ath_led_blink_work);
  	ath_unregister_led(&sc->assoc_led);
  	sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
-@@ -1034,6 +1037,9 @@ static void ath_init_leds(struct ath_sof
+@@ -1048,6 +1051,9 @@ static void ath_init_leds(struct ath_sof
  	char *trigger;
  	int ret;
  

package/mac80211/patches/540-b43-Add-fw-capabilities.patch

@@ -122,7 +122,7 @@ and automagic QoS-disabling.
  	} else {
  		b43info(dev->wl, "Loading firmware version %u.%u "
  			"(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
-@@ -3629,7 +3658,7 @@ static int b43_op_set_key(struct ieee802
+@@ -3627,7 +3656,7 @@ static int b43_op_set_key(struct ieee802
  	if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
  		goto out_unlock;
  
@@ -131,7 +131,7 @@ and automagic QoS-disabling.
  		/* We don't have firmware for the crypto engine.
  		 * Must use software-crypto. */
  		err = -EOPNOTSUPP;
-@@ -4737,6 +4766,7 @@ static int b43_wireless_init(struct ssb_
+@@ -4735,6 +4764,7 @@ static int b43_wireless_init(struct ssb_
  		b43err(NULL, "Could not allocate ieee80211 device\n");
  		goto out;
  	}
@@ -139,7 +139,7 @@ and automagic QoS-disabling.
  
  	/* fill hw info */
  	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
-@@ -4750,7 +4780,8 @@ static int b43_wireless_init(struct ssb_
+@@ -4748,7 +4778,8 @@ static int b43_wireless_init(struct ssb_
  		BIT(NL80211_IFTYPE_WDS) |
  		BIT(NL80211_IFTYPE_ADHOC);
  
@@ -149,7 +149,7 @@ and automagic QoS-disabling.
  	hw->max_rates = 2;
  	SET_IEEE80211_DEV(hw, dev->dev);
  	if (is_valid_ether_addr(sprom->et1mac))
-@@ -4758,9 +4789,7 @@ static int b43_wireless_init(struct ssb_
+@@ -4756,9 +4787,7 @@ static int b43_wireless_init(struct ssb_
  	else
  		SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
  
@@ -160,7 +160,7 @@ and automagic QoS-disabling.
  	wl->hw = hw;
  	spin_lock_init(&wl->irq_lock);
  	rwlock_init(&wl->tx_lock);
-@@ -4826,8 +4855,13 @@ static void b43_remove(struct ssb_device
+@@ -4824,8 +4853,13 @@ static void b43_remove(struct ssb_device
  	cancel_work_sync(&wldev->restart_work);
  
  	B43_WARN_ON(!wl);