AT91: Add flexibity board support

The patch below adds AT91 Flexibity Connect board support.

Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27412 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/at91/flexibity/base-files/etc/config/network

@@ -0,0 +1,20 @@
+
+config 'interface' 'loopback'
+	option 'ifname' 'lo'
+	option 'proto' 'static'
+	option 'ipaddr' '127.0.0.1'
+	option 'netmask' '255.0.0.0'
+
+config 'interface' 'cfg'
+	option 'ifname' 'usb0'
+	option 'proto' 'static'
+	option 'netmask' '255.255.255.0'
+	option 'gateway' '192.168.119.1'
+	option 'ipaddr' '192.168.119.2'
+
+config 'interface' 'lan'
+	option 'ifname' 'wlan0'
+	option 'proto' 'dhcp'
+
+#config 'interface' 'wan'
+#	option 

target/linux/at91/flexibity/base-files/etc/init.d/custom-user-startup

@@ -0,0 +1,22 @@
+#!/bin/sh /etc/rc.common
+START=90
+# place your own startup commands here
+#
+# REMEMBER: You *MUST* place an '&' after launching programs you 
+#   that are to continue running in the background.
+#
+#   i.e. 
+#   BAD:  upnpd
+#   GOOD: upnpd &
+# 
+# Failure to do this will result in the startup process halting
+# on this file and the diagnostic light remaining on (at least
+# for WRT54G(s) models).
+#
+
+# coldplug USB devices
+udevtrigger &
+
+# wait for coldplug and re-generate wireless config
+#wifi detect > /etc/config/wireless &
+