1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-30 18:14:04 +02:00

ramips: raeth: add PHYLIB support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30547 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
juhosg 2012-02-15 06:47:12 +00:00
parent f166258123
commit d214321c8c
5 changed files with 229 additions and 10 deletions

View File

@ -19,6 +19,8 @@
#ifndef _RAMIPS_ETH_PLATFORM_H
#define _RAMIPS_ETH_PLATFORM_H
#include <linux/phy.h>
struct ramips_eth_platform_data
{
unsigned char mac[6];
@ -30,6 +32,9 @@ struct ramips_eth_platform_data
int duplex;
int tx_fc;
int rx_fc;
u32 phy_mask;
phy_interface_t phy_if_mode;
};
#endif /* _RAMIPS_ETH_PLATFORM_H */

View File

@ -92,10 +92,31 @@ ramips_hw_set_macaddr(unsigned char *mac)
#define RAMIPS_MDIO_RETRY 1000
static void
ramips_setup_mdio_cfg(struct raeth_priv *re)
static unsigned char *ramips_speed_str(struct raeth_priv *re)
{
unsigned int mdio_cfg;
switch (re->speed) {
case SPEED_1000:
return "1000";
case SPEED_100:
return "100";
case SPEED_10:
return "10";
}
return "?";
}
static void ramips_link_adjust(struct raeth_priv *re)
{
struct ramips_eth_platform_data *pdata;
u32 mdio_cfg;
pdata = re->parent->platform_data;
if (!re->link) {
netif_carrier_off(re->netdev);
netdev_info(re->netdev, "link down\n");
return;
}
mdio_cfg = RAMIPS_MDIO_CFG_TX_CLK_SKEW_200 |
RAMIPS_MDIO_CFG_TX_CLK_SKEW_200 |
@ -125,7 +146,13 @@ ramips_setup_mdio_cfg(struct raeth_priv *re)
}
ramips_fe_wr(mdio_cfg, RAMIPS_MDIO_CFG);
netif_carrier_on(re->netdev);
netdev_info(re->netdev, "link up (%sMbps/%s duplex)\n",
ramips_speed_str(re),
(DUPLEX_FULL == re->duplex) ? "Full" : "Half");
}
static int
ramips_mdio_wait_ready(struct raeth_priv *re)
{
@ -246,12 +273,159 @@ ramips_mdio_cleanup(struct raeth_priv *re)
kfree(re->mii_bus);
}
#else
static inline void
ramips_setup_mdio_cfg(struct raeth_priv *re)
static void
ramips_phy_link_adjust(struct net_device *dev)
{
struct raeth_priv *re = netdev_priv(dev);
struct phy_device *phydev = re->phy_dev;
unsigned long flags;
int status_change = 0;
spin_lock_irqsave(&re->phy_lock, flags);
if (phydev->link)
if (re->duplex != phydev->duplex ||
re->speed != phydev->speed)
status_change = 1;
if (phydev->link != re->link)
status_change = 1;
re->link = phydev->link;
re->duplex = phydev->duplex;
re->speed = phydev->speed;
if (status_change)
ramips_link_adjust(re);
spin_unlock_irqrestore(&re->phy_lock, flags);
}
static int
ramips_phy_connect_multi(struct raeth_priv *re)
{
struct net_device *netdev = re->netdev;
struct ramips_eth_platform_data *pdata;
struct phy_device *phydev = NULL;
int phy_addr;
int ret = 0;
pdata = re->parent->platform_data;
for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
if (!(pdata->phy_mask & (1 << phy_addr)))
continue;
if (re->mii_bus->phy_map[phy_addr] == NULL)
continue;
RADEBUG("%s: PHY found at %s, uid=%08x\n",
netdev->name,
dev_name(&re->mii_bus->phy_map[phy_addr]->dev),
re->mii_bus->phy_map[phy_addr]->phy_id);
if (phydev == NULL)
phydev = re->mii_bus->phy_map[phy_addr];
}
if (!phydev) {
netdev_err(netdev, "no PHY found with phy_mask=%08x\n",
pdata->phy_mask);
return -ENODEV;
}
re->phy_dev = phy_connect(netdev, dev_name(&phydev->dev),
ramips_phy_link_adjust, 0,
pdata->phy_if_mode);
if (IS_ERR(re->phy_dev)) {
netdev_err(netdev, "could not connect to PHY at %s\n",
dev_name(&phydev->dev));
return PTR_ERR(re->phy_dev);
}
phydev->supported &= PHY_GBIT_FEATURES;
phydev->advertising = phydev->supported;
RADEBUG("%s: connected to PHY at %s [uid=%08x, driver=%s]\n",
netdev->name, dev_name(&phydev->dev),
phydev->phy_id, phydev->drv->name);
re->link = 0;
re->speed = 0;
re->duplex = -1;
re->rx_fc = 0;
re->tx_fc = 0;
return ret;
}
static int
ramips_phy_connect_fixed(struct raeth_priv *re)
{
struct ramips_eth_platform_data *pdata;
pdata = re->parent->platform_data;
switch (pdata->speed) {
case SPEED_10:
case SPEED_100:
case SPEED_1000:
break;
default:
netdev_err(re->netdev, "invalid speed specified\n");
return -EINVAL;
}
RADEBUG("%s: using fixed link parameters\n", re->netdev->name);
re->speed = pdata->speed;
re->duplex = pdata->duplex;
re->tx_fc = pdata->tx_fc;
re->rx_fc = pdata->tx_fc;
return 0;
}
static int
ramips_phy_connect(struct raeth_priv *re)
{
struct ramips_eth_platform_data *pdata;
pdata = re->parent->platform_data;
if (pdata->phy_mask)
return ramips_phy_connect_multi(re);
return ramips_phy_connect_fixed(re);
}
static void
ramips_phy_disconnect(struct raeth_priv *re)
{
if (re->phy_dev)
phy_disconnect(re->phy_dev);
}
static void
ramips_phy_start(struct raeth_priv *re)
{
if (re->phy_dev) {
phy_start(re->phy_dev);
} else {
re->link = 1;
ramips_link_adjust(re);
}
}
static void
ramips_phy_stop(struct raeth_priv *re)
{
if (re->phy_dev) {
phy_stop(re->phy_dev);
} else {
re->link = 0;
ramips_link_adjust(re);
}
}
#else
static inline int
ramips_mdio_init(struct raeth_priv *re)
{
@ -262,6 +436,27 @@ static inline void
ramips_mdio_cleanup(struct raeth_priv *re)
{
}
static inline int
ramips_phy_connect(struct raeth_priv *re)
{
return 0;
}
static inline void
ramips_phy_disconnect(struct raeth_priv *re)
{
}
static inline void
ramips_phy_start(struct raeth_priv *re)
{
}
static inline void
ramips_phy_stop(struct raeth_priv *re)
{
}
#endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT3883 */
static void
@ -546,7 +741,7 @@ ramips_eth_open(struct net_device *dev)
(unsigned long)dev);
tasklet_init(&priv->rx_tasklet, ramips_eth_rx_hw, (unsigned long)dev);
ramips_setup_mdio_cfg(priv);
ramips_phy_start(priv);
ramips_fe_wr(RAMIPS_DELAY_INIT, RAMIPS_DLY_INT_CFG);
ramips_fe_wr(RAMIPS_TX_DLY_INT | RAMIPS_RX_DLY_INT, RAMIPS_FE_INT_ENABLE);
@ -580,6 +775,7 @@ ramips_eth_stop(struct net_device *dev)
/* disable all interrupts in the hw */
ramips_fe_wr(0, RAMIPS_FE_INT_ENABLE);
ramips_phy_stop(priv);
free_irq(dev->irq, dev);
netif_stop_queue(dev);
tasklet_kill(&priv->tx_housekeeping_tasklet);
@ -604,8 +800,20 @@ ramips_eth_probe(struct net_device *dev)
dev->mtu = 1500;
dev->watchdog_timeo = TX_TIMEOUT;
spin_lock_init(&priv->page_lock);
spin_lock_init(&priv->phy_lock);
err = ramips_mdio_init(priv);
if (err)
return err;
err = ramips_phy_connect(priv);
if (err)
goto err_mdio_cleanup;
return 0;
err_mdio_cleanup:
ramips_mdio_cleanup(priv);
return err;
}
@ -614,6 +822,7 @@ ramips_eth_uninit(struct net_device *dev)
{
struct raeth_priv *re = netdev_priv(dev);
ramips_phy_disconnect(re);
ramips_mdio_cleanup(re);
}

View File

@ -233,6 +233,7 @@ struct raeth_priv
struct device *parent;
struct ramips_eth_platform_data *plat;
int link;
int speed;
int duplex;
int tx_fc;
@ -240,6 +241,8 @@ struct raeth_priv
struct mii_bus *mii_bus;
int mii_irq[PHY_MAX_ADDR];
struct phy_device *phy_dev;
spinlock_t phy_lock;
};
#endif /* RAMIPS_ETH_H */

View File

@ -1,12 +1,13 @@
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -494,6 +494,16 @@ config MIPS_AU1X00_ENET
@@ -494,6 +494,17 @@ config MIPS_AU1X00_ENET
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
+config MIPS_RAMIPS_NET
+ tristate "Ethernet driver for rt288x/rt305x"
+ depends on MIPS_RALINK
+ select PHYLIB if (SOC_RT288X || SOC_RT3883)
+ help
+ This driver supports the etehrnet mac inside the ralink wisocs
+

View File

@ -1,12 +1,13 @@
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -277,6 +277,16 @@ source "drivers/net/plip/Kconfig"
@@ -277,6 +277,17 @@ source "drivers/net/plip/Kconfig"
source "drivers/net/ppp/Kconfig"
+config MIPS_RAMIPS_NET
+ tristate "Ethernet driver for rt288x/rt305x"
+ depends on MIPS_RALINK
+ select PHYLIB if (SOC_RT288X || SOC_RT3883)
+ help
+ This driver supports the etehrnet mac inside the ralink wisocs
+