ar71xx: add support for the TL-WR841N v1.5 board

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18893 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/ar71xx/base-files/etc/defconfig/tl-wr841n-v1/network

@@ -0,0 +1,19 @@
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface mac0
+	option ifname	eth0
+
+config interface lan
+	option ifname	"lan1 lan2 lan3 lan4"
+	option type	bridge
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0
+
+config interface wan
+	option ifname	wan
+	option proto	dhcp

target/linux/ar71xx/base-files/etc/diag.sh

@@ -72,6 +72,9 @@ get_status_led() {
 	tl-wr741nd)
 		status_led="tl-wr741nd:green:system"
 		;;
+	tl-wr841n-v1)
+		status_led="tl-wr841n:green:system"
+		;;
 	tl-wr941nd)
 		status_led="tl-wr941nd:green:system"
 		;;

target/linux/ar71xx/base-files/lib/ar71xx.sh

@@ -76,6 +76,9 @@ ar71xx_board_name() {
 	*TL-WR741ND)
 		name="tl-wr741nd"
 		;;
+	*"TL-WR841N v1")
+		name="tl-wr841n-v1"
+		;;
 	*TL-WR941ND)
 		name="tl-wr941nd"
 		;;

target/linux/ar71xx/base-files/lib/upgrade/platform.sh

@@ -75,7 +75,7 @@ platform_check_image() {
 		}
 		return 0
 		;;
-	tl-wr741nd | tl-wr941nd | tl-wr1043nd)
+	tl-wr741nd | tl-wr841n-v1 | tl-wr941nd | tl-wr1043nd)
 		[ "$magic" != "0100" ] && {
 			echo "Invalid image type."
 			return 1

target/linux/ar71xx/config-2.6.30

@@ -21,6 +21,7 @@ CONFIG_AR71XX_MACH_RB_4XX=y
 CONFIG_AR71XX_MACH_TEW_632BRP=y
 CONFIG_AR71XX_MACH_TL_WR1043ND=y
 CONFIG_AR71XX_MACH_TL_WR741ND=y
+CONFIG_AR71XX_MACH_TL_WR841N_V1=y
 CONFIG_AR71XX_MACH_TL_WR941ND=y
 CONFIG_AR71XX_MACH_UBNT=y
 CONFIG_AR71XX_MACH_WNDR3700=y

target/linux/ar71xx/config-2.6.31

@@ -23,6 +23,7 @@ CONFIG_AR71XX_MACH_RB_4XX=y
 CONFIG_AR71XX_MACH_TEW_632BRP=y
 CONFIG_AR71XX_MACH_TL_WR1043ND=y
 CONFIG_AR71XX_MACH_TL_WR741ND=y
+CONFIG_AR71XX_MACH_TL_WR841N_V1=y
 CONFIG_AR71XX_MACH_TL_WR941ND=y
 CONFIG_AR71XX_MACH_UBNT=y
 CONFIG_AR71XX_MACH_WNDR3700=y

target/linux/ar71xx/config-2.6.32

@@ -23,6 +23,7 @@ CONFIG_AR71XX_MACH_RB_4XX=y
 CONFIG_AR71XX_MACH_TEW_632BRP=y
 CONFIG_AR71XX_MACH_TL_WR1043ND=y
 CONFIG_AR71XX_MACH_TL_WR741ND=y
+CONFIG_AR71XX_MACH_TL_WR841N_V1=y
 CONFIG_AR71XX_MACH_TL_WR941ND=y
 CONFIG_AR71XX_MACH_UBNT=y
 CONFIG_AR71XX_MACH_WNDR3700=y

target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig

@@ -94,6 +94,11 @@ config AR71XX_MACH_TL_WR741ND
 	select AR71XX_DEV_AP91_PCI if PCI
 	default y
 
+config AR71XX_MACH_TL_WR841N_V1
+	bool "TP-LINK TL-WR841N v1 support"
+	select AR71XX_DEV_M25P80
+	default y
+
 config AR71XX_MACH_TL_WR941ND
 	bool "TP-LINK TL-WR941ND support"
 	select AR71XX_DEV_M25P80

target/linux/ar71xx/files/arch/mips/ar71xx/Makefile

@@ -31,6 +31,7 @@ obj-$(CONFIG_AR71XX_MACH_PB44)		+= mach-pb44.o
 obj-$(CONFIG_AR71XX_MACH_RB_4XX)	+= mach-rb-4xx.o
 obj-$(CONFIG_AR71XX_MACH_TEW_632BRP)	+= mach-tew-632brp.o
 obj-$(CONFIG_AR71XX_MACH_TL_WR741ND)	+= mach-tl-wr741nd.o
+obj-$(CONFIG_AR71XX_MACH_TL_WR841N_V1)	+= mach-tl-wr841n.o
 obj-$(CONFIG_AR71XX_MACH_TL_WR941ND)	+= mach-tl-wr941nd.o
 obj-$(CONFIG_AR71XX_MACH_TL_WR1043ND)	+= mach-tl-wr1043nd.o
 obj-$(CONFIG_AR71XX_MACH_UBNT)		+= mach-ubnt.o

target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr841n.c

@@ -0,0 +1,158 @@
+/*
+ *  TP-LINK TL-WR841N board support
+ *
+ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/input.h>
+
+#include <asm/mips_machine.h>
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/pci.h>
+
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
+
+#define TL_WR841ND_V1_GPIO_LED_SYSTEM	2
+#define TL_WR841ND_V1_GPIO_LED_QSS	5
+
+#define TL_WR841ND_V1_GPIO_BTN_RESET	3
+#define TL_WR841ND_V1_GPIO_BTN_QSS	7
+
+#define TL_WR841ND_V1_BUTTONS_POLL_INTERVAL	20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition tl_wr841n_v1_partitions[] = {
+	{
+		.name		= "redboot",
+		.offset		= 0,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "kernel",
+		.offset		= 0x020000,
+		.size		= 0x140000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x160000,
+		.size		= 0x280000,
+	} , {
+		.name		= "config",
+		.offset		= 0x3e0000,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "firmware",
+		.offset		= 0x020000,
+		.size		= 0x3c0000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data tl_wr841n_v1_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = tl_wr841n_v1_partitions,
+        .nr_parts       = ARRAY_SIZE(tl_wr841n_v1_partitions),
+#endif
+};
+
+static struct ar71xx_pci_irq tl_wr841n_v1_pci_irqs[] __initdata = {
+	{
+		.slot	= 0,
+		.pin	= 1,
+		.irq	= AR71XX_PCI_IRQ_DEV0,
+	}, {
+		.slot	= 1,
+		.pin	= 1,
+		.irq	= AR71XX_PCI_IRQ_DEV1,
+	}, {
+		.slot	= 2,
+		.pin	= 1,
+		.irq	= AR71XX_PCI_IRQ_DEV2,
+	}
+};
+
+static struct gpio_led tl_wr841n_v1_leds_gpio[] __initdata = {
+	{
+		.name		= "tl-wr841n:green:system",
+		.gpio		= TL_WR841ND_V1_GPIO_LED_SYSTEM,
+		.active_low	= 1,
+	}, {
+		.name		= "tl-wr841n:red:qss",
+		.gpio		= TL_WR841ND_V1_GPIO_LED_QSS,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button tl_wr841n_v1_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= BTN_0,
+		.threshold	= 5,
+		.gpio		= TL_WR841ND_V1_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "qss",
+		.type		= EV_KEY,
+		.code		= BTN_1,
+		.threshold	= 5,
+		.gpio		= TL_WR841ND_V1_GPIO_BTN_QSS,
+		.active_low	= 1,
+	}
+};
+
+static struct dsa_chip_data tl_wr841n_v1_dsa_chip = {
+	.port_names[0]  = "wan",
+	.port_names[1]  = "lan1",
+	.port_names[2]  = "lan2",
+	.port_names[3]  = "lan3",
+	.port_names[4]  = "lan4",
+	.port_names[5]  = "cpu",
+};
+
+static struct dsa_platform_data tl_wr841n_v1_dsa_data = {
+	.nr_chips	= 1,
+	.chip		= &tl_wr841n_v1_dsa_chip,
+};
+
+static void __init tl_wr841n_v1_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+
+	ar71xx_set_mac_base(mac);
+
+	ar71xx_add_device_mdio(0x0);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth0_data.phy_mask = 0x0;
+	ar71xx_eth0_data.speed = SPEED_100;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+	ar71xx_add_device_eth(0);
+
+	ar71xx_add_device_dsa(0, &tl_wr841n_v1_dsa_data);
+
+	ar71xx_add_device_m25p80(&tl_wr841n_v1_flash_data);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v1_leds_gpio),
+					tl_wr841n_v1_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, TL_WR841ND_V1_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(tl_wr841n_v1_gpio_buttons),
+					tl_wr841n_v1_gpio_buttons);
+
+	ar71xx_pci_init(ARRAY_SIZE(tl_wr841n_v1_pci_irqs),
+			tl_wr841n_v1_pci_irqs);
+}
+
+MIPS_MACHINE(AR71XX_MACH_TL_WR841N_V1, "TP-LINK TL-WR841N v1",
+	     tl_wr841n_v1_setup);

target/linux/ar71xx/files/arch/mips/ar71xx/prom.c

@@ -70,6 +70,9 @@ static struct board_rec boards[] __initdata = {
 	}, {
 		.name		= "TL-WR741ND",
 		.mach_type	= AR71XX_MACH_TL_WR741ND,
+	}, {
+		.name		= "TL-WR841N-v1.5",
+		.mach_type	= AR71XX_MACH_TL_WR841N_V1,
 	}, {
 		.name		= "TL-WR941ND",
 		.mach_type	= AR71XX_MACH_TL_WR941ND,

target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h

@@ -139,6 +139,7 @@ enum ar71xx_mach_type {
 	AR71XX_MACH_TEW_632BRP,	/* TRENDnet TEW-632BRP */
 	AR71XX_MACH_DIR_615_C1,	/* D-Link DIR-615 rev. C1 */
 	AR71XX_MACH_TL_WR741ND,	/* TP-LINK TL-WR741ND */
+	AR71XX_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */
 	AR71XX_MACH_TL_WR941ND,	/* TP-LINK TL-WR941ND */
 	AR71XX_MACH_TL_WR1043ND, /* TP-LINK TL-WR1041ND */
 	AR71XX_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */

target/linux/ar71xx/image/Makefile

@@ -461,6 +461,10 @@ define Image/Build/Profile/TLWR741NDV1
 	$(call Image/Build/Template/TPLINK4K/$(1),tl-wr741ndv1,board=TL-WR741ND,TL-WR741NDv1)
 endef
 
+define Image/Build/Profile/TLWR841NV15
+	$(call Image/Build/Template/TPLINK/$(1),tl-wr841n-v1.5,board=TL-WR841N-v1.5,TL-WR841Nv1.5)
+endef
+
 define Image/Build/Profile/TLWR841NDV3
 	$(call Image/Build/Template/TPLINK/$(1),tl-wr841ndv3,board=TL-WR941ND,TL-WR841NDv3)
 endef
@@ -503,6 +507,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/TEW632BRP,$(1))
 	$(call Image/Build/Profile/TEW652BRP,$(1))
 	$(call Image/Build/Profile/TLWR741NDV1,$(1))
+	$(call Image/Build/Profile/TLWR841NV15,$(1))
 	$(call Image/Build/Profile/TLWR841NDV3,$(1))
 	$(call Image/Build/Profile/TLWR841NDV5,$(1))
 	$(call Image/Build/Profile/TLWR941NDV2,$(1))

target/linux/ar71xx/profiles/tp-link.mk

@@ -15,6 +15,17 @@ endef
 
 $(eval $(call Profile,TLWR741NDV1))
 
+define Profile/TLWR841NV15
+	NAME:=TP-LINK TL-WR841N v1.5
+	PACKAGES:=kmod-ath9k hostapd-mini
+endef
+
+define Profile/TLWR841NV15/Description
+	Package set optimized for the TP-LINK TL-WR841N v1.5.
+endef
+
+$(eval $(call Profile,TLWR841NV15))
+
 define Profile/TLWR841NDV3
 	NAME:=TP-LINK TL-WR841ND v3
 	PACKAGES:=kmod-ath9k hostapd-mini

tools/firmware-utils/src/mktplinkfw.c

@@ -34,6 +34,7 @@
 
 #define HEADER_VERSION_V1	0x01000000
 #define HWID_TL_WR741ND_V1	0x07410001
+#define HWID_TL_WR841N_V1_5	0x08410002
 #define HWID_TL_WR841ND_V3	0x08410003
 #define HWID_TL_WR841ND_V5	0x08410005
 #define HWID_TL_WR941ND_V2	0x09410002
@@ -113,6 +114,14 @@ static struct board_info boards[] = {
 		.kernel_la	= 0x80060000,
 		.kernel_ep	= 0x80060000,
 		.rootfs_ofs	= 0x140000,
+	}, {
+		.id		= "TL-WR841Nv1.5",
+		.hw_id		= HWID_TL_WR841N_V1_5,
+		.hw_rev		= 2,
+		.fw_max_len	= 0x3c0000,
+		.kernel_la	= 0x80060000,
+		.kernel_ep	= 0x80060000,
+		.rootfs_ofs	= 0x140000,
 	}, {
 		.id		= "TL-WR841NDv3",
 		.hw_id		= HWID_TL_WR841ND_V3,