qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2025-04-21 12:27:27 +03:00
Code Activity

[atheros] nuke trailing whitespaces

Browse Source 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10872 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
juhosg
2008-04-20 06:40:36 +00:00
parent 4668cb8663
commit dd4dcd736d
13 changed files with 118 additions and 118 deletions
Download Patch File Download Diff File Expand all files Collapse all files

62
target/linux/atheros/files/drivers/net/ar2313/ar2313.c
View File

@@ -14,7 +14,7 @@
* (at your option) any later version.
*
* Additional credits:
* This code is taken from John Taylor's Sibyte driver and then
* This code is taken from John Taylor's Sibyte driver and then
* modified for the AR2313.
*/
@@ -134,7 +134,7 @@
#define CRC_LEN 4
#define RX_OFFSET 2
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
#define VLAN_HDR 4
#else
#define VLAN_HDR 0
@@ -232,8 +232,8 @@ int __init ar2313_probe(struct platform_device *pdev)
return (-ENXIO);
}
/*
* When there's only one MAC, PHY regs are typically on ENET0,
/*
* When there's only one MAC, PHY regs are typically on ENET0,
* even though the MAC might be on ENET1.
* Needto remap PHY regs separately in this case
*/
@@ -270,7 +270,7 @@ int __init ar2313_probe(struct platform_device *pdev)
sp->board_idx = BOARD_IDX_STATIC;
if (ar2313_init(dev)) {
/*
/*
* ar2313_init() calls ar2313_init_cleanup() on error.
*/
kfree(dev);
@@ -295,7 +295,7 @@ int __init ar2313_probe(struct platform_device *pdev)
sp->mii_bus.id = 0;
sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL);
*sp->mii_bus.irq = PHY_POLL;
mdiobus_register(&sp->mii_bus);
if (mdiobus_probe(dev) != 0) {
@@ -308,7 +308,7 @@ int __init ar2313_probe(struct platform_device *pdev)
/* start link poll timer */
ar2313_setup_timer(dev);
}
return 0;
}
@@ -379,9 +379,9 @@ static void printMcList(struct net_device *dev)
*/
static void ar2313_multicast_list(struct net_device *dev)
{
/*
* Always listen to broadcasts and
* treat IFF bits independently
/*
* Always listen to broadcasts and
* treat IFF bits independently
*/
struct ar2313_private *sp = (struct ar2313_private *) dev->priv;
unsigned int recognise;
@@ -420,7 +420,7 @@ static void rx_tasklet_cleanup(struct net_device *dev)
{
struct ar2313_private *sp = dev->priv;
/*
/*
* Tasklet may be scheduled. Need to get it removed from the list
* since we're about to free the struct.
*/
@@ -442,7 +442,7 @@ static int __exit ar2313_remove(struct platform_device *pdev)
/*
* Restart the AR2313 ethernet controller.
* Restart the AR2313 ethernet controller.
*/
static int ar2313_restart(struct net_device *dev)
{
@@ -606,7 +606,7 @@ static void ar2313_link_timer_fn(unsigned long data)
// autonegotiated value of half or full duplex.
ar2313_check_link(dev);
// Loop faster when we don't have link.
// Loop faster when we don't have link.
// This was needed to speed up the AP bootstrap time.
if (sp->link == 0) {
mod_timer(&sp->link_timer, jiffies + HZ / 2);
@@ -728,7 +728,7 @@ static int ar2313_init(struct net_device *dev)
struct ar2313_private *sp = dev->priv;
int ecode = 0;
/*
/*
* Allocate descriptors
*/
if (ar2313_allocate_descriptors(dev)) {
@@ -738,7 +738,7 @@ static int ar2313_init(struct net_device *dev)
goto init_error;
}
/*
/*
* Get the memory for the skb rings.
*/
if (sp->rx_skb == NULL) {
@@ -767,7 +767,7 @@ static int ar2313_init(struct net_device *dev)
}
memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
/*
/*
* Set tx_csm before we start receiving interrupts, otherwise
* the interrupt handler might think it is supposed to process
* tx ints before we are up and running, which may cause a null
@@ -778,23 +778,23 @@ static int ar2313_init(struct net_device *dev)
sp->tx_prd = 0;
sp->tx_csm = 0;
/*
/*
* Zero the stats before starting the interface
*/
memset(&sp->stats, 0, sizeof(sp->stats));
/*
/*
* We load the ring here as there seem to be no way to tell the
* firmware to wipe the ring without re-initializing it.
*/
ar2313_load_rx_ring(dev, RX_RING_SIZE);
/*
/*
* Init hardware
*/
ar2313_reset_reg(dev);
/*
/*
* Get the IRQ
*/
ecode =
@@ -852,7 +852,7 @@ static void ar2313_load_rx_ring(struct net_device *dev, int nr_bufs)
// partha: create additional room in the front for tx pkt capture
skb_reserve(skb, 32);
/*
/*
* Make sure IP header starts on a fresh cache line.
*/
skb->dev = dev;
@@ -899,7 +899,7 @@ static int ar2313_rx_int(struct net_device *dev)
idx = sp->cur_rx;
/* process at most the entire ring and then wait for another interrupt
/* process at most the entire ring and then wait for another interrupt
*/
while (1) {
@@ -1081,7 +1081,7 @@ static irqreturn_t ar2313_interrupt(int irq, void *dev_id)
unsigned int status, enabled;
/* clear interrupt */
/*
/*
* Don't clear RI bit if currently disabled.
*/
status = sp->dma_regs->status;
@@ -1090,7 +1090,7 @@ static irqreturn_t ar2313_interrupt(int irq, void *dev_id)
if (status & DMA_STATUS_NIS) {
/* normal status */
/*
/*
* Don't schedule rx processing if interrupt
* is already disabled.
*/
@@ -1178,12 +1178,12 @@ static void ar2313_halt(struct net_device *dev)
static int ar2313_close(struct net_device *dev)
{
#if 0
/*
/*
* Disable interrupts
*/
disable_irq(dev->irq);
/*
/*
* Without (or before) releasing irq and stopping hardware, this
* is an absolute non-sense, by the way. It will be reset instantly
* by the first irq.
@@ -1251,7 +1251,7 @@ static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
struct ar2313_private *sp = dev->priv;
int ret;
switch (cmd) {
case SIOCETHTOOL:
@@ -1271,12 +1271,12 @@ static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
(ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
return -EFAULT;
return 0;
case SIOCGMIIPHY:
case SIOCGMIIREG:
case SIOCSMIIREG:
return phy_mii_ioctl(sp->phy_dev, data, cmd);
default:
break;
}
@@ -1314,7 +1314,7 @@ static void ar2313_adjust_link(struct net_device *dev)
#define MII_ADDR(phy, reg) \
((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
static int
static int
mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
{
struct net_device *const dev = bus->priv;
@@ -1326,7 +1326,7 @@ mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
return (ethernet->mii_data >> MII_DATA_SHIFT);
}
static int
static int
mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
u16 value)
{