lantiq: bump to 3.1

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28721 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/lantiq/files-3.1/arch/mips/include/asm/mach-lantiq/dev-gpio-buttons.h

@@ -0,0 +1,26 @@
+/*
+ *  Lantiq GPIO button support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _LANTIQ_DEV_GPIO_BUTTONS_H
+#define _LANTIQ_DEV_GPIO_BUTTONS_H
+
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#define LTQ_KEYS_POLL_INTERVAL		20 /* msecs */
+#define LTQ_KEYS_DEBOUNCE_INTERVAL	(3 * LTQ_KEYS_POLL_INTERVAL)
+
+void ltq_register_gpio_keys_polled(int id,
+				      unsigned poll_interval,
+				      unsigned nbuttons,
+				      struct gpio_keys_button *buttons);
+
+#endif /* _LANTIQ_DEV_GPIO_BUTTONS_H */

target/linux/lantiq/files-3.1/arch/mips/include/asm/mach-lantiq/dev-gpio-leds.h

@@ -0,0 +1,21 @@
+/*
+ *  Lantiq GPIO LED device support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _LANTIQ_DEV_LEDS_GPIO_H
+#define _LANTIQ_DEV_LEDS_GPIO_H
+
+#include <linux/leds.h>
+
+void ltq_add_device_gpio_leds(int id,
+	unsigned num_leds,
+	struct gpio_led *leds) __init;
+
+#endif /* _LANTIQ_DEV_LEDS_GPIO_H */

target/linux/lantiq/files-3.1/arch/mips/lantiq/dev-gpio-buttons.c

@@ -0,0 +1,58 @@
+/*
+ *  Lantiq GPIO button support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include <dev-gpio-buttons.h>
+
+void __init ltq_register_gpio_keys_polled(int id,
+					     unsigned poll_interval,
+					     unsigned nbuttons,
+					     struct gpio_keys_button *buttons)
+{
+	struct platform_device *pdev;
+	struct gpio_keys_platform_data pdata;
+	struct gpio_keys_button *p;
+	int err;
+
+	p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return;
+
+	memcpy(p, buttons, nbuttons * sizeof(*p));
+
+	pdev = platform_device_alloc("gpio-keys-polled", id);
+	if (!pdev)
+		goto err_free_buttons;
+
+	memset(&pdata, 0, sizeof(pdata));
+	pdata.poll_interval = poll_interval;
+	pdata.nbuttons = nbuttons;
+	pdata.buttons = p;
+
+	err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+	if (err)
+		goto err_put_pdev;
+
+	err = platform_device_add(pdev);
+	if (err)
+		goto err_put_pdev;
+
+	return;
+
+err_put_pdev:
+	platform_device_put(pdev);
+
+err_free_buttons:
+	kfree(p);
+}

target/linux/lantiq/files-3.1/arch/mips/lantiq/dev-gpio-leds.c

@@ -0,0 +1,57 @@
+/*
+ *  Lantiq GPIO LED device support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include <dev-gpio-leds.h>
+
+void __init ltq_add_device_gpio_leds(int id, unsigned num_leds,
+					struct gpio_led *leds)
+{
+	struct platform_device *pdev;
+	struct gpio_led_platform_data pdata;
+	struct gpio_led *p;
+	int err;
+
+	p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return;
+
+	memcpy(p, leds, num_leds * sizeof(*p));
+
+	pdev = platform_device_alloc("gpio-leds", id);
+	if (!pdev)
+		goto err_free_leds;
+
+	memset(&pdata, 0, sizeof(pdata));
+	pdata.num_leds = num_leds;
+	pdata.leds = p;
+
+	err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+	if (err)
+		goto err_put_pdev;
+
+	err = platform_device_add(pdev);
+	if (err)
+		goto err_put_pdev;
+
+	return;
+
+err_put_pdev:
+	platform_device_put(pdev);
+
+err_free_leds:
+	kfree(p);
+}

target/linux/lantiq/files-3.1/arch/mips/lantiq/falcon/addon-easy98000.c

@@ -0,0 +1,212 @@
+/*
+ *  EASY98000 CPLD Addon driver
+ *
+ *  Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2  as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+
+struct easy98000_reg_cpld {
+	u16 cmdreg1;		/* 0x1 */
+	u16 cmdreg0;		/* 0x0 */
+	u16 idreg0;		/* 0x3 */
+	u16 resreg;		/* 0x2 */
+	u16 intreg;		/* 0x5 */
+	u16 idreg1;		/* 0x4 */
+	u16 ledreg;		/* 0x7 */
+	u16 pcmconconfig;	/* 0x6 */
+	u16 res0;		/* 0x9 */
+	u16 ethledreg;		/* 0x8 */
+	u16 res1[4];		/* 0xa-0xd */
+	u16 cpld1v;		/* 0xf */
+	u16 cpld2v;		/* 0xe */
+};
+static struct easy98000_reg_cpld * const cpld =
+	(struct easy98000_reg_cpld *)(KSEG1 | 0x17c00000);
+#define cpld_r8(reg) (__raw_readw(&cpld->reg) & 0xFF)
+#define cpld_w8(val, reg) __raw_writew((val) & 0xFF, &cpld->reg)
+
+int easy98000_addon_has_dm9000(void)
+{
+	if ((cpld_r8(idreg0) & 0xF) == 1)
+		return 1;
+	return 0;
+}
+
+#if defined(CONFIG_PROC_FS)
+typedef void (*cpld_dump) (struct seq_file *s);
+struct proc_entry {
+	char *name;
+	void *callback;
+};
+
+static int cpld_proc_show ( struct seq_file *s, void *p )
+{
+	cpld_dump dump = s->private;
+
+	if ( dump != NULL )
+		dump(s);
+
+	return 0;
+}
+
+static int cpld_proc_open ( struct inode *inode, struct file *file )
+{
+	return single_open ( file, cpld_proc_show, PDE(inode)->data );
+}
+
+static void cpld_versions_get ( struct seq_file *s )
+{
+	seq_printf(s, "CPLD1: V%d\n", cpld_r8(cpld1v));
+	seq_printf(s, "CPLD2: V%d\n", cpld_r8(cpld2v));
+}
+
+static void cpld_ebu_module_get ( struct seq_file *s )
+{
+	u8 addon_id;
+
+	addon_id = cpld_r8(idreg0) & 0xF;
+	switch (addon_id) {
+	case 0xF: /* nothing connected */
+		break;
+	case 1:
+		seq_printf(s, "Ethernet Controller module (dm9000)\n");
+		break;
+	default:
+		seq_printf(s, "Unknown EBU module (EBU_ID=0x%02X)\n", addon_id);
+		break;
+	}
+}
+
+static void cpld_xmii_module_get ( struct seq_file *s )
+{
+	u8 addon_id;
+	char *mod = NULL;
+
+	addon_id = cpld_r8(idreg1) & 0xF;
+	switch (addon_id) {
+	case 0xF:
+		mod = "no module";
+		break;
+	case 0x1:
+		mod = "RGMII module";
+		break;
+	case 0x4:
+		mod = "GMII MAC Mode (XWAY TANTOS-3G)";
+		break;
+	case 0x6:
+		mod = "TMII MAC Mode (XWAY TANTOS-3G)";
+		break;
+	case 0x8:
+		mod = "GMII PHY module";
+		break;
+	case 0x9:
+		mod = "MII PHY module";
+		break;
+	case 0xA:
+		mod = "RMII PHY module";
+		break;
+	default:
+		break;
+	}
+	if (mod)
+		seq_printf(s, "%s\n", mod);
+	else
+		seq_printf(s, "unknown xMII module (xMII_ID=0x%02X)\n", addon_id);
+}
+
+static struct proc_entry proc_entries[] = {
+	{"versions",	cpld_versions_get},
+	{"ebu",		cpld_ebu_module_get},
+	{"xmii",	cpld_xmii_module_get},
+};
+
+static struct file_operations ops = {
+	.owner   = THIS_MODULE,
+	.open    = cpld_proc_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = single_release,
+};
+
+static void cpld_proc_entry_create(struct proc_dir_entry *parent_node,
+				   struct proc_entry *proc_entry)
+{
+	proc_create_data ( proc_entry->name, (S_IFREG | S_IRUGO), parent_node,
+			   &ops, proc_entry->callback);
+}
+
+static int cpld_proc_install(void)
+{
+	struct proc_dir_entry *driver_proc_node;
+
+	driver_proc_node = proc_mkdir("cpld", NULL);
+	if (driver_proc_node != NULL) {
+		int i;
+		for (i = 0; i < ARRAY_SIZE(proc_entries); i++)
+			cpld_proc_entry_create(driver_proc_node,
+					      &proc_entries[i]);
+	} else {
+		printk("cannot create proc entry");
+		return -1;
+	}
+	return 0;
+}
+#else
+static inline int cpld_proc_install(void) {}
+#endif
+
+static int easy98000_addon_probe(struct platform_device *pdev)
+{
+	return cpld_proc_install();
+}
+
+static int easy98000_addon_remove(struct platform_device *pdev)
+{
+#if defined(CONFIG_PROC_FS)
+	char buf[64];
+	int i;
+
+	for (i = 0; i < sizeof(proc_entries) / sizeof(proc_entries[0]); i++) {
+		sprintf(buf, "cpld/%s", proc_entries[i].name);
+		remove_proc_entry(buf, 0);
+	}
+	remove_proc_entry("cpld", 0);
+#endif
+	return 0;
+}
+
+static struct platform_driver easy98000_addon_driver = {
+	.probe = easy98000_addon_probe,
+	.remove = __devexit_p(easy98000_addon_remove),
+	.driver = {
+		.name = "easy98000_addon",
+		.owner = THIS_MODULE,
+	},
+};
+
+int __init easy98000_addon_init(void)
+{
+	return platform_driver_register(&easy98000_addon_driver);
+}
+
+void __exit easy98000_addon_exit(void)
+{
+	platform_driver_unregister(&easy98000_addon_driver);
+}
+
+module_init(easy98000_addon_init);
+module_exit(easy98000_addon_exit);

target/linux/lantiq/files-3.1/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.c

@@ -0,0 +1,160 @@
+/*
+ *  EASY98000 CPLD LED driver
+ *
+ *  Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2  as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+
+#include "dev-leds-easy98000-cpld.h"
+
+const char *led_name[8] = {
+	"ge0_act",
+	"ge0_link",
+	"ge1_act",
+	"ge1_link",
+	"fe2_act",
+	"fe2_link",
+	"fe3_act",
+	"fe3_link"
+};
+
+#define cpld_base7			((u16 *)(KSEG1 | 0x17c0000c))
+#define cpld_base8			((u16 *)(KSEG1 | 0x17c00012))
+
+#define ltq_r16(reg)			__raw_readw(reg)
+#define ltq_w16(val, reg)		__raw_writew(val, reg)
+
+struct cpld_led_dev {
+	struct led_classdev	cdev;
+	u8			mask;
+	u16			*base;
+};
+
+struct cpld_led_drvdata {
+	struct cpld_led_dev	*led_devs;
+	int			num_leds;
+};
+
+void led_set(u8 mask, u16 *base)
+{
+	ltq_w16(ltq_r16(base) | mask, base);
+}
+
+void led_clear(u8 mask, u16 *base)
+{
+	ltq_w16(ltq_r16(base) & (~mask), base);
+}
+
+void led_blink_clear(u8 mask, u16 *base)
+{
+	led_clear(mask, base);
+}
+
+static void led_brightness(struct led_classdev *led_cdev,
+			       enum led_brightness value)
+{
+	struct cpld_led_dev *led_dev =
+	    container_of(led_cdev, struct cpld_led_dev, cdev);
+
+	if (value)
+		led_set(led_dev->mask, led_dev->base);
+	else
+		led_clear(led_dev->mask, led_dev->base);
+}
+
+static int led_probe(struct platform_device *pdev)
+{
+	int i;
+	char name[32];
+	struct cpld_led_drvdata *drvdata;
+	int ret = 0;
+
+	drvdata = kzalloc(sizeof(struct cpld_led_drvdata) +
+			  sizeof(struct cpld_led_dev) * MAX_LED,
+			  GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
+	drvdata->led_devs = (struct cpld_led_dev *) &drvdata[1];
+
+	for (i = 0; i < MAX_LED; i++) {
+		struct cpld_led_dev *led_dev = &drvdata->led_devs[i];
+		led_dev->cdev.brightness_set = led_brightness;
+		led_dev->cdev.default_trigger = NULL;
+		led_dev->mask = 1 << (i % 8);
+		if(i < 8) {
+			sprintf(name, "easy98000-cpld:%s", led_name[i]);
+			led_dev->base = cpld_base8;
+		} else {
+			sprintf(name, "easy98000-cpld:red:%d", i-8);
+			led_dev->base = cpld_base7;
+		}
+		led_dev->cdev.name = name;
+		ret = led_classdev_register(&pdev->dev, &led_dev->cdev);
+		if (ret)
+			goto err;
+	}
+	platform_set_drvdata(pdev, drvdata);
+	return 0;
+
+err:
+	printk("led_probe: 3\n");
+	for (i = i - 1; i >= 0; i--)
+		led_classdev_unregister(&drvdata->led_devs[i].cdev);
+
+	kfree(drvdata);
+	return ret;
+}
+
+static int led_remove(struct platform_device *pdev)
+{
+	int i;
+	struct cpld_led_drvdata *drvdata = platform_get_drvdata(pdev);
+	for (i = 0; i < MAX_LED; i++)
+		led_classdev_unregister(&drvdata->led_devs[i].cdev);
+	kfree(drvdata);
+	return 0;
+}
+
+static struct platform_driver led_driver = {
+	.probe = led_probe,
+	.remove = __devexit_p(led_remove),
+	.driver = {
+		   .name = LED_NAME,
+		   .owner = THIS_MODULE,
+		   },
+};
+
+int __init easy98000_cpld_led_init(void)
+{
+	pr_info(LED_DESC ", Version " LED_VERSION
+		" (c) Copyright 2011, Lantiq Deutschland GmbH\n");
+	return platform_driver_register(&led_driver);
+}
+
+void __exit easy98000_cpld_led_exit(void)
+{
+	platform_driver_unregister(&led_driver);
+}
+
+module_init(easy98000_cpld_led_init);
+module_exit(easy98000_cpld_led_exit);
+
+MODULE_DESCRIPTION(LED_NAME);
+MODULE_DESCRIPTION(LED_DESC);
+MODULE_AUTHOR("Ralph Hempel <ralph.hempel@lantiq.com>");
+MODULE_LICENSE("GPL v2");
+

target/linux/lantiq/files-3.1/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.h

@@ -0,0 +1,20 @@
+/*
+ *  EASY98000 CPLD LED driver
+ *
+ *  Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2  as published
+ *  by the Free Software Foundation.
+ *
+ */
+#ifndef _INCLUDE_EASY98000_CPLD_LED_H_
+#define _INCLUDE_EASY98000_CPLD_LED_H_
+
+#define LED_NAME	"easy98000_cpld_led"
+#define LED_DESC	"EASY98000 LED driver"
+#define LED_VERSION	"1.0.0"
+
+#define MAX_LED		16
+
+#endif	/* _INCLUDE_EASY98000_CPLD_LED_H_ */

target/linux/lantiq/files-3.1/arch/mips/lantiq/falcon/mach-95C3AM1.c

@@ -0,0 +1,96 @@
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
+
+#include <dev-gpio-leds.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+
+#define BOARD_95C3AM1_GPIO_LED_0 10
+#define BOARD_95C3AM1_GPIO_LED_1 11
+#define BOARD_95C3AM1_GPIO_LED_2 12
+#define BOARD_95C3AM1_GPIO_LED_3 13
+
+extern unsigned char ltq_ethaddr[6];
+
+static struct mtd_partition board_95C3AM1_partitions[] =
+{
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x40000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x40000,
+		.size	= 0x40000,	/* 2 sectors for redundant env. */
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x80000,
+		.size	= 0xF80000,	/* map only 16 MiB */
+	},
+};
+
+static struct flash_platform_data board_95C3AM1_flash_platform_data = {
+	.name = "sflash",
+	.parts = board_95C3AM1_partitions,
+	.nr_parts = ARRAY_SIZE(board_95C3AM1_partitions)
+};
+
+static struct spi_board_info board_95C3AM1_flash_data __initdata = {
+	.modalias		= "m25p80",
+	.bus_num		= 0,
+	.chip_select		= 0,
+	.max_speed_hz		= 10 * 1000 * 1000,
+	.mode			= SPI_MODE_3,
+	.platform_data		= &board_95C3AM1_flash_platform_data
+};
+
+static struct gpio_led board_95C3AM1_gpio_leds[] __initdata = {
+	{
+		.name		= "power",
+		.gpio		= BOARD_95C3AM1_GPIO_LED_0,
+		.active_low	= 0,
+	}, {
+		.name		= "optical",
+		.gpio		= BOARD_95C3AM1_GPIO_LED_1,
+		.active_low	= 0,
+	}, {
+		.name		= "lan",
+		.gpio		= BOARD_95C3AM1_GPIO_LED_2,
+		.active_low	= 0,
+	}, {
+		.name		= "update",
+		.gpio		= BOARD_95C3AM1_GPIO_LED_3,
+		.active_low	= 0,
+	}
+};
+
+static struct i2c_gpio_platform_data board_95C3AM1_i2c_gpio_data = {
+	.sda_pin	= 107,
+	.scl_pin	= 108,
+};
+
+static struct platform_device board_95C3AM1_i2c_gpio_device = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &board_95C3AM1_i2c_gpio_data,
+	}
+};
+
+static void __init board_95C3AM1_init(void)
+{
+	falcon_register_i2c();
+	falcon_register_spi_flash(&board_95C3AM1_flash_data);
+	platform_device_register(&board_95C3AM1_i2c_gpio_device);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(board_95C3AM1_gpio_leds),
+						board_95C3AM1_gpio_leds);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_95C3AM1,
+			"95C3AM1",
+			"95C3AM1 Board",
+			board_95C3AM1_init);

target/linux/lantiq/files-3.1/arch/mips/lantiq/falcon/mach-easy98020.c

@@ -0,0 +1,120 @@
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/gpio_buttons.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <dev-gpio-leds.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+
+#define EASY98020_GPIO_LED_0 9
+#define EASY98020_GPIO_LED_1 10
+#define EASY98020_GPIO_LED_2 11
+#define EASY98020_GPIO_LED_3 12
+#define EASY98020_GPIO_LED_GE0_ACT 110
+#define EASY98020_GPIO_LED_GE0_LINK 109
+#define EASY98020_GPIO_LED_GE1_ACT 106
+#define EASY98020_GPIO_LED_GE1_LINK 105
+
+extern unsigned char ltq_ethaddr[6];
+
+static struct mtd_partition easy98020_spi_partitions[] =
+{
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x40000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x40000,
+		.size	= 0x40000,	/* 2 sectors for redundant env. */
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x80000,
+		.size	= 0xF80000,	/* map only 16 MiB */
+	},
+};
+
+static struct flash_platform_data easy98020_spi_flash_platform_data = {
+	.name = "sflash",
+	.parts = easy98020_spi_partitions,
+	.nr_parts = ARRAY_SIZE(easy98020_spi_partitions)
+};
+
+static struct spi_board_info easy98020_spi_flash_data __initdata = {
+	.modalias		= "m25p80",
+	.bus_num		= 0,
+	.chip_select		= 0,
+	.max_speed_hz		= 10 * 1000 * 1000,
+	.mode			= SPI_MODE_3,
+	.platform_data		= &easy98020_spi_flash_platform_data
+};
+
+static struct gpio_led easy98020_gpio_leds[] __initdata = {
+	{
+		.name		= "easy98020:green:0",
+		.gpio		= EASY98020_GPIO_LED_0,
+		.active_low	= 0,
+	}, {
+		.name		= "easy98020:green:1",
+		.gpio		= EASY98020_GPIO_LED_1,
+		.active_low	= 0,
+	}, {
+		.name		= "easy98020:green:2",
+		.gpio		= EASY98020_GPIO_LED_2,
+		.active_low	= 0,
+	}, {
+		.name		= "easy98020:green:3",
+		.gpio		= EASY98020_GPIO_LED_3,
+		.active_low	= 0,
+	}, {
+		.name		= "easy98020:ge0_act",
+		.gpio		= EASY98020_GPIO_LED_GE0_ACT,
+		.active_low	= 0,
+	}, {
+		.name		= "easy98020:ge0_link",
+		.gpio		= EASY98020_GPIO_LED_GE0_LINK,
+		.active_low	= 0,
+	}, {
+		.name		= "easy98020:ge1_act",
+		.gpio		= EASY98020_GPIO_LED_GE1_ACT,
+		.active_low	= 0,
+	}, {
+		.name		= "easy98020:ge1_link",
+		.gpio		= EASY98020_GPIO_LED_GE1_LINK,
+		.active_low	= 0,
+	}
+};
+
+static void __init easy98020_init(void)
+{
+	falcon_register_i2c();
+	falcon_register_spi_flash(&easy98020_spi_flash_data);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(easy98020_gpio_leds),
+					easy98020_gpio_leds);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_EASY98020,
+			"EASY98020",
+			"EASY98020 Eval Board",
+			easy98020_init);
+
+MIPS_MACHINE(LANTIQ_MACH_EASY98020_1LAN,
+			"EASY98020_1LAN",
+			"EASY98020 Eval Board (1 LAN port)",
+			easy98020_init);
+
+MIPS_MACHINE(LANTIQ_MACH_EASY98020_2LAN,
+			"EASY98020_2LAN",
+			"EASY98020 Eval Board (2 LAN ports)",
+			easy98020_init);

target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/dev-dwc_otg.c

@@ -0,0 +1,70 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/mtd/physmap.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/etherdevice.h>
+#include <linux/reboot.h>
+#include <linux/time.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+
+#include <lantiq_soc.h>
+#include <lantiq_irq.h>
+#include <lantiq_platform.h>
+
+#define LTQ_USB_IOMEM_BASE 0x1e101000
+#define LTQ_USB_IOMEM_SIZE 0x00001000
+
+static struct resource resources[] =
+{
+	[0] = {
+		.name    = "dwc_otg_membase",
+		.start   = LTQ_USB_IOMEM_BASE,
+		.end	 = LTQ_USB_IOMEM_BASE + LTQ_USB_IOMEM_SIZE - 1,
+		.flags	 = IORESOURCE_MEM,
+	},
+	[1] = {
+		.name    = "dwc_otg_irq",
+		.start   = LTQ_USB_INT,
+		.flags   = IORESOURCE_IRQ,
+	},
+};
+
+static u64 dwc_dmamask = (u32)0x1fffffff;
+
+static struct platform_device platform_dev = {
+	.name = "dwc_otg",
+	.dev = {
+		.dma_mask      = &dwc_dmamask,
+	},
+	.resource		= resources,
+	.num_resources		= ARRAY_SIZE(resources),
+};
+
+int __init
+xway_register_dwc(int pin)
+{
+	struct irq_data d;
+	d.irq = resources[1].start;
+	ltq_enable_irq(&d);
+	platform_dev.dev.platform_data = (void*) pin;
+	return platform_device_register(&platform_dev);
+}

target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/dev-dwc_otg.h

@@ -0,0 +1,17 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_DEV_DWC_H__
+#define _LTQ_DEV_DWC_H__
+
+#include <lantiq_platform.h>
+
+extern void __init xway_register_dwc(int pin);
+
+#endif

target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/mach-arv45xx.c

@@ -0,0 +1,544 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/gpio_buttons.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/etherdevice.h>
+#include <linux/ath5k_platform.h>
+#include <linux/pci.h>
+
+#include <lantiq_soc.h>
+#include <lantiq_platform.h>
+#include <dev-gpio-leds.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+#include "dev-dwc_otg.h"
+
+static struct mtd_partition arv4510_partitions[] =
+{
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x20000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x20000,
+		.size	= 0x120000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x40000,
+		.size	= 0xfa0000,
+	},
+	{
+		.name	= "board_config",
+		.offset	= 0xfe0000,
+		.size	= 0x20000,
+	},
+};
+
+static struct mtd_partition arv45xx_partitions[] =
+{
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x20000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x20000,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x30000,
+		.size	= 0x3c0000,
+	},
+	{
+		.name	= "board_config",
+		.offset	= 0x3f0000,
+		.size	= 0x10000,
+	},
+};
+
+static struct mtd_partition arv7525_partitions[] =
+{
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x10000,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x20000,
+		.size	= 0x3d0000,
+	},
+	{
+		.name	= "board_config",
+		.offset	= 0x3f0000,
+		.size	= 0x10000,
+	},
+};
+
+static struct mtd_partition arv75xx_partitions[] =
+{
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x10000,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x20000,
+		.size	= 0x7d0000,
+	},
+	{
+		.name	= "board_config",
+		.offset	= 0x7f0000,
+		.size	= 0x10000,
+	},
+};
+
+static struct physmap_flash_data arv4510_flash_data = {
+	.nr_parts	= ARRAY_SIZE(arv4510_partitions),
+	.parts		= arv4510_partitions,
+};
+
+static struct physmap_flash_data arv45xx_flash_data = {
+	.nr_parts	= ARRAY_SIZE(arv45xx_partitions),
+	.parts		= arv45xx_partitions,
+};
+
+static struct physmap_flash_data arv7525_flash_data = {
+	.nr_parts	= ARRAY_SIZE(arv7525_partitions),
+	.parts		= arv7525_partitions,
+};
+
+static struct physmap_flash_data arv75xx_flash_data = {
+	.nr_parts	= ARRAY_SIZE(arv75xx_partitions),
+	.parts		= arv75xx_partitions,
+};
+
+static struct ltq_pci_data ltq_pci_data = {
+	.clock  = PCI_CLOCK_EXT,
+	.gpio   = PCI_GNT1 | PCI_REQ1,
+	.irq    = {
+		[14] = INT_NUM_IM0_IRL0 + 22,
+	},
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+	.mii_mode	= PHY_INTERFACE_MODE_RMII,
+};
+
+static struct gpio_led
+arv4510pw_gpio_leds[] __initdata = {
+	{ .name = "soc:green:foo", .gpio = 4, .active_low = 1, },
+};
+
+static struct gpio_led
+arv4518pw_gpio_leds[] __initdata = {
+	{ .name = "soc:green:power", .gpio = 3, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:adsl", .gpio = 4, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:internet", .gpio = 5, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:wlan", .gpio = 6, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:yellow:wps", .gpio = 7, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:fail", .gpio = 8, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:usb", .gpio = 19, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:voip", .gpio = 100, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:fxs1", .gpio = 101, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:fxs2", .gpio = 102, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:fxo", .gpio = 103, .active_low = 1, .default_trigger = "default-on" },
+};
+
+static struct gpio_button
+arv4518pw_gpio_buttons[] __initdata = {
+	{ .desc = "wlan", .type = EV_KEY, .code = BTN_0, .threshold = 3, .gpio = 28, .active_low = 1, },
+	{ .desc = "wps", .type = EV_KEY, .code = BTN_1, .threshold = 3, .gpio = 29, .active_low = 1, },
+	{ .desc = "reset", .type = EV_KEY, .code = BTN_2, .threshold = 3, .gpio = 30, .active_low = 1, },
+};
+
+static struct gpio_led
+arv4520pw_gpio_leds[] __initdata = {
+	{ .name = "soc:blue:power", .gpio = 3, .active_low = 1, },
+	{ .name = "soc:blue:adsl", .gpio = 4, .active_low = 1, },
+	{ .name = "soc:blue:internet", .gpio = 5, .active_low = 1, },
+	{ .name = "soc:red:power", .gpio = 6, .active_low = 1, },
+	{ .name = "soc:yellow:wps", .gpio = 7, .active_low = 1, },
+	{ .name = "soc:red:wps", .gpio = 9, .active_low = 1, },
+	{ .name = "soc:blue:voip", .gpio = 100, .active_low = 1, },
+	{ .name = "soc:blue:fxs1", .gpio = 101, .active_low = 1, },
+	{ .name = "soc:blue:fxs2", .gpio = 102, .active_low = 1, },
+	{ .name = "soc:blue:fxo", .gpio = 103, .active_low = 1, },
+	{ .name = "soc:blue:voice", .gpio = 104, .active_low = 1, },
+	{ .name = "soc:blue:usb", .gpio = 105, .active_low = 1, },
+	{ .name = "soc:blue:wlan", .gpio = 106, .active_low = 1, },
+};
+
+static struct gpio_led
+arv452cpw_gpio_leds[] __initdata = {
+	{ .name = "soc:blue:power", .gpio = 3, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:adsl", .gpio = 4, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:isdn", .gpio = 5, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:power", .gpio = 6, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:yellow:wps", .gpio = 7, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:wps", .gpio = 9, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:fxs1", .gpio = 100, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:fxs2", .gpio = 101, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:wps", .gpio = 102, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:fxo", .gpio = 103, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:voice", .gpio = 104, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:usb", .gpio = 105, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:wlan", .gpio = 106, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:internet", .gpio = 108, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:internet", .gpio = 109, .active_low = 1, .default_trigger = "default-on" },
+};
+
+static struct gpio_led
+arv4525pw_gpio_leds[] __initdata = {
+	{ .name = "soc:green:festnetz", .gpio = 4, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:internet", .gpio = 5, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:dsl", .gpio = 6, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:wlan", .gpio = 8, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:online", .gpio = 9, .active_low = 1, .default_trigger = "default-on" },
+};
+
+static struct gpio_led
+arv752dpw22_gpio_leds[] __initdata = {
+	{ .name = "soc:blue:power", .gpio = 3, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:internet", .gpio = 5, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:power", .gpio = 6, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:wps", .gpio = 8, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:fxo", .gpio = 103, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:voice", .gpio = 104, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:usb", .gpio = 105, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:wlan", .gpio = 106, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:wlan1", .gpio = 107, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:wlan", .gpio = 108, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:wlan1", .gpio = 109, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:eth1", .gpio = 111, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:eth2", .gpio = 112, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:eth3", .gpio = 113, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:eth4", .gpio = 114, .active_low = 1, .default_trigger = "default-on", },
+};
+
+static struct gpio_button
+arv752dpw22_gpio_buttons[] __initdata = {
+	{ .desc = "btn0", .type = EV_KEY, .code = BTN_0, .threshold = 3, .gpio = 12, .active_low = 1, },
+	{ .desc = "btn1", .type = EV_KEY, .code = BTN_1, .threshold = 3, .gpio = 13, .active_low = 1, },
+	{ .desc = "btn2", .type = EV_KEY, .code = BTN_2, .threshold = 3, .gpio = 28, .active_low = 1, },
+};
+
+static struct gpio_led
+arv7518pw_gpio_leds[] __initdata = {
+	{ .name = "soc:green:power", .gpio = 2, .active_low = 1, },
+	{ .name = "soc:green:adsl", .gpio = 4, .active_low = 1, },
+	{ .name = "soc:green:internet", .gpio = 5, .active_low = 1, },
+	{ .name = "soc:green:wlan", .gpio = 6, .active_low = 1, },
+	{ .name = "soc:red:internet", .gpio = 8, .active_low = 1, },
+	{ .name = "soc:green:usb", .gpio = 19, .active_low = 1, },
+};
+
+static struct gpio_button
+arv7518pw_gpio_buttons[] __initdata = {
+	{ .desc = "reset", .type = EV_KEY, .code = BTN_0, .threshold = 3, .gpio = 23, .active_low = 1, },
+	{ .desc = "wlan", .type = EV_KEY, .code = BTN_1, .threshold = 3, .gpio = 25, .active_low = 1, },
+};
+
+static void
+arv45xx_register_ethernet(void)
+{
+#define ARV45XX_BRN_MAC			0x3f0016
+	memcpy_fromio(&ltq_eth_data.mac.sa_data,
+		(void *)KSEG1ADDR(LTQ_FLASH_START + ARV45XX_BRN_MAC), 6);
+	ltq_register_etop(&ltq_eth_data);
+}
+
+static void
+arv75xx_register_ethernet(void)
+{
+#define ARV75XX_BRN_MAC			0x7f0016
+	memcpy_fromio(&ltq_eth_data.mac.sa_data,
+		(void *)KSEG1ADDR(LTQ_FLASH_START + ARV75XX_BRN_MAC), 6);
+	ltq_register_etop(&ltq_eth_data);
+}
+
+static void
+bewan_register_ethernet(void)
+{
+#define BEWAN_BRN_MAC			0x3f0014
+	memcpy_fromio(&ltq_eth_data.mac.sa_data,
+		(void *)KSEG1ADDR(LTQ_FLASH_START + BEWAN_BRN_MAC), 6);
+	ltq_register_etop(&ltq_eth_data);
+}
+
+static u16 arv45xx_ath5k_eeprom_data[ATH5K_PLAT_EEP_MAX_WORDS];
+static struct ath5k_platform_data arv45xx_ath5k_platform_data;
+
+/*static int arv45xx_pci_plat_dev_init(struct pci_dev *dev)
+{
+	dev->dev.platform_data = &arv45xx_ath5k_platform_data;
+	return 0;
+}
+*/
+void __init
+arv45xx_register_ath5k(void)
+{
+#define ARV45XX_BRN_ATH		0x3f0478
+	int i;
+	unsigned char eeprom_mac[6];
+	static u16 eeprom_data[ATH5K_PLAT_EEP_MAX_WORDS];
+	u32 *p = (u32*)arv45xx_ath5k_eeprom_data;
+
+	memcpy_fromio(eeprom_mac,
+		(void *)KSEG1ADDR(LTQ_FLASH_START + ARV45XX_BRN_MAC), 6);
+	eeprom_mac[5]++;
+	memcpy_fromio(arv45xx_ath5k_eeprom_data,
+		(void *)KSEG1ADDR(LTQ_FLASH_START + ARV45XX_BRN_ATH), ATH5K_PLAT_EEP_MAX_WORDS);
+	// swap eeprom bytes
+	for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS>>1; i++){
+		//arv4518_ath5k_eeprom_data[i] = ((eeprom_data[i]&0xff)<<8)|((eeprom_data[i]&0xff00)>>8);
+		p[i] = ((eeprom_data[(i<<1)+1]&0xff)<<24)|((eeprom_data[(i<<1)+1]&0xff00)<<8)|((eeprom_data[i<<1]&0xff)<<8)|((eeprom_data[i<<1]&0xff00)>>8);
+		if (i == 0xbf>>1){
+			// printk ("regdomain: 0x%x --> 0x%x\n", p[i], (p[i] & 0xffff0000)|0x67);
+			/* regdomain is invalid?? how did original fw convert 
+			* value to 0x82d4 ??
+			* for now, force to 0x67 */
+			p[i] &= 0xffff0000;
+			p[i] |= 0x67;
+		}
+	}
+	arv45xx_ath5k_platform_data.eeprom_data = arv45xx_ath5k_eeprom_data;
+	arv45xx_ath5k_platform_data.macaddr = eeprom_mac;
+	//lqpci_plat_dev_init = arv45xx_pci_plat_dev_init;
+}
+
+static void __init
+arv3527p_init(void)
+{
+	ltq_register_gpio_stp();
+	//ltq_add_device_gpio_leds(arv3527p_gpio_leds, ARRAY_SIZE(arv3527p_gpio_leds));
+	ltq_register_nor(&arv45xx_flash_data);
+	arv45xx_register_ethernet();
+}
+
+MIPS_MACHINE(LANTIQ_MACH_ARV3527P,
+			"ARV3527P",
+			"ARV3527P - Arcor Easybox 401",
+			arv3527p_init);
+
+static void __init
+arv4510pw_init(void)
+{
+	ltq_register_gpio_stp();
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4510pw_gpio_leds), arv4510pw_gpio_leds);
+	ltq_register_nor(&arv4510_flash_data);
+	ltq_pci_data.irq[12] = (INT_NUM_IM2_IRL0 + 31);
+	ltq_pci_data.irq[15] = (INT_NUM_IM0_IRL0 + 26);
+	ltq_pci_data.gpio |= PCI_EXIN2 | PCI_REQ2;
+	ltq_register_pci(&ltq_pci_data);
+	bewan_register_ethernet();
+}
+
+MIPS_MACHINE(LANTIQ_MACH_ARV4510PW,
+			"ARV4510PW",
+			"ARV4510PW - Wippies Homebox",
+			arv4510pw_init);
+
+static void __init
+arv4518pw_init(void)
+{
+#define ARV4518PW_EBU			0
+#define ARV4518PW_USB			14
+#define ARV4518PW_SWITCH_RESET		13
+#define ARV4518PW_MADWIFI_ADDR		0xb07f0400
+
+	ltq_register_gpio_ebu(ARV4518PW_EBU);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4518pw_gpio_leds), arv4518pw_gpio_leds);
+	ltq_register_gpio_buttons(arv4518pw_gpio_buttons, ARRAY_SIZE(arv4518pw_gpio_buttons));
+	ltq_register_nor(&arv45xx_flash_data);
+	ltq_pci_data.gpio = PCI_GNT2 | PCI_REQ2;
+	ltq_register_pci(&ltq_pci_data);
+	ltq_register_madwifi_eep(ARV4518PW_MADWIFI_ADDR);
+	xway_register_dwc(ARV4518PW_USB);
+	arv45xx_register_ethernet();
+	arv45xx_register_ath5k();
+
+	gpio_request(ARV4518PW_SWITCH_RESET, "switch");
+	gpio_direction_output(ARV4518PW_SWITCH_RESET, 1);
+	gpio_export(ARV4518PW_SWITCH_RESET, 0);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_ARV4518PW,
+			"ARV4518PW",
+			"ARV4518PW - SMC7908A-ISP, Airties WAV-221",
+			arv4518pw_init);
+
+static void __init
+arv4520pw_init(void)
+{
+#define ARV4520PW_EBU			0x400
+#define ARV4520PW_USB			28
+#define ARV4520PW_SWITCH_RESET		110
+
+	ltq_register_gpio_ebu(ARV4520PW_EBU);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4520pw_gpio_leds), arv4520pw_gpio_leds);
+	ltq_register_nor(&arv45xx_flash_data);
+	ltq_register_pci(&ltq_pci_data);
+	ltq_register_tapi();
+	arv45xx_register_ethernet();
+	xway_register_dwc(ARV4520PW_USB);
+
+	gpio_request(ARV4520PW_SWITCH_RESET, "switch");
+	gpio_set_value(ARV4520PW_SWITCH_RESET, 1);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_ARV4520PW,
+			"ARV4520PW",
+			"ARV4520PW - Airties WAV-281, Arcor A800",
+			arv4520pw_init);
+
+static void __init
+arv452Cpw_init(void)
+{
+#define ARV452CPW_EBU			0x77f
+#define ARV452CPW_USB			28
+#define ARV452CPW_RELAY1		31
+#define ARV452CPW_RELAY2		107
+#define ARV452CPW_SWITCH_RESET		110
+#define ARV452CPW_MADWIFI_ADDR		0xb07f0400
+
+	ltq_register_gpio_ebu(ARV452CPW_EBU);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv452cpw_gpio_leds), arv452cpw_gpio_leds);
+	ltq_register_nor(&arv45xx_flash_data);
+	ltq_register_pci(&ltq_pci_data);
+	ltq_register_madwifi_eep(ARV452CPW_MADWIFI_ADDR);
+	xway_register_dwc(ARV452CPW_USB);
+	arv45xx_register_ethernet();
+	arv45xx_register_ath5k();
+
+	gpio_request(ARV452CPW_SWITCH_RESET, "switch");
+	gpio_set_value(ARV452CPW_SWITCH_RESET, 1);
+	gpio_export(ARV452CPW_SWITCH_RESET, 0);
+
+	gpio_request(ARV452CPW_RELAY1, "relay1");
+	gpio_direction_output(ARV452CPW_RELAY1, 1);
+	gpio_export(ARV452CPW_RELAY1, 0);
+
+	gpio_request(ARV452CPW_RELAY2, "relay2");
+	gpio_set_value(ARV452CPW_RELAY2, 1);
+	gpio_export(ARV452CPW_RELAY2, 0);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_ARV452CPW,
+			"ARV452CPW",
+			"ARV452CPW - Arcor A801",
+			arv452Cpw_init);
+
+#define ARV4525PW_MADWIFI_ADDR		0xb07f0400
+
+static void __init
+arv4525pw_init(void)
+{
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4525pw_gpio_leds), arv4525pw_gpio_leds);
+	ltq_register_nor(&arv45xx_flash_data);
+	ltq_pci_data.clock = PCI_CLOCK_INT;
+	ltq_register_pci(&ltq_pci_data);
+	ltq_register_madwifi_eep(ARV4525PW_MADWIFI_ADDR);
+	ltq_eth_data.mii_mode = PHY_INTERFACE_MODE_MII;
+	arv45xx_register_ethernet();
+}
+
+MIPS_MACHINE(LANTIQ_MACH_ARV4525PW,
+			"ARV4525PW",
+			"ARV4525PW - Speedport W502V",
+			arv4525pw_init);
+
+static void __init
+arv7525pw_init(void)
+{
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4525pw_gpio_leds), arv4525pw_gpio_leds);
+	ltq_register_nor(&arv7525_flash_data);
+	ltq_pci_data.clock = PCI_CLOCK_INT;
+	ltq_register_pci(&ltq_pci_data);
+	ltq_eth_data.mii_mode = PHY_INTERFACE_MODE_MII;
+	arv45xx_register_ethernet();
+}
+
+MIPS_MACHINE(LANTIQ_MACH_ARV7525PW,
+			"ARV7525PW",
+			"ARV7525PW - Speedport W303V",
+			arv7525pw_init);
+
+static void __init
+arv7518pw_init(void)
+{
+#define ARV7518PW_EBU			0x2
+#define ARV7518PW_USB			14
+
+	ltq_register_gpio_ebu(ARV7518PW_EBU);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv7518pw_gpio_leds), arv7518pw_gpio_leds);
+	ltq_register_gpio_buttons(arv7518pw_gpio_buttons, ARRAY_SIZE(arv7518pw_gpio_buttons));
+	ltq_register_nor(&arv75xx_flash_data);
+	ltq_register_pci(&ltq_pci_data);
+	ltq_register_tapi();
+	xway_register_dwc(ARV7518PW_USB);
+	arv75xx_register_ethernet();
+	//arv7518_register_ath9k(mac);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_ARV7518PW,
+			"ARV7518PW",
+			"ARV7518PW - ASTORIA",
+			arv7518pw_init);
+
+static void __init
+arv752dpw22_init(void)
+{
+#define ARV752DPW22_EBU			0x2
+#define ARV752DPW22_USB			100
+#define ARV752DPW22_RELAY		101
+
+	ltq_register_gpio_ebu(ARV752DPW22_EBU);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv752dpw22_gpio_leds), arv752dpw22_gpio_leds);
+	ltq_register_gpio_buttons(arv752dpw22_gpio_buttons, ARRAY_SIZE(arv752dpw22_gpio_buttons));
+	ltq_register_nor(&arv75xx_flash_data);
+	ltq_pci_data.irq[15] = (INT_NUM_IM3_IRL0 + 31);
+	ltq_pci_data.gpio |= PCI_EXIN1 | PCI_REQ2;
+	ltq_register_pci(&ltq_pci_data);
+	xway_register_dwc(ARV752DPW22_USB);
+	arv75xx_register_ethernet();
+
+	gpio_request(ARV752DPW22_RELAY, "relay");
+	gpio_set_value(ARV752DPW22_RELAY, 1);
+	gpio_export(ARV752DPW22_RELAY, 0);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_ARV752DPW22,
+			"ARV752DPW22",
+			"ARV752DPW22 - Arcor A803",
+			arv752dpw22_init);

target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/mach-easy50601.c

@@ -0,0 +1,57 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+
+#include <lantiq.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+
+static struct mtd_partition easy50601_partitions[] = {
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x10000,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x20000,
+		.size	= 0x3d0000,
+	},
+};
+
+static struct physmap_flash_data easy50601_flash_data = {
+	.nr_parts	= ARRAY_SIZE(easy50601_partitions),
+	.parts		= easy50601_partitions,
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+	.mii_mode = -1, /* use EPHY */
+};
+
+static void __init easy50601_init(void)
+{
+	ltq_register_nor(&easy50601_flash_data);
+	ltq_register_etop(&ltq_eth_data);
+}
+
+MIPS_MACHINE(LTQ_MACH_EASY50601,
+			"EASY50601",
+			"EASY50601 Eval Board",
+			easy50601_init);

target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/mach-easy50712.c

@@ -0,0 +1,70 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/phy.h>
+
+#include <lantiq_soc.h>
+#include <irq.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+
+static struct mtd_partition easy50712_partitions[] = {
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x10000,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x20000,
+		.size	= 0x3d0000,
+	},
+};
+
+static struct physmap_flash_data easy50712_flash_data = {
+	.nr_parts	= ARRAY_SIZE(easy50712_partitions),
+	.parts		= easy50712_partitions,
+};
+
+static struct ltq_pci_data ltq_pci_data = {
+	.clock	= PCI_CLOCK_INT,
+	.gpio	= PCI_GNT1 | PCI_REQ1,
+	.irq	= {
+		[14] = INT_NUM_IM0_IRL0 + 22,
+	},
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+	.mii_mode = PHY_INTERFACE_MODE_MII,
+};
+
+static void __init easy50712_init(void)
+{
+	ltq_register_gpio_stp();
+	ltq_register_nor(&easy50712_flash_data);
+	ltq_register_pci(&ltq_pci_data);
+	ltq_register_etop(&ltq_eth_data);
+	ltq_register_tapi();
+}
+
+MIPS_MACHINE(LTQ_MACH_EASY50712,
+	     "EASY50712",
+	     "EASY50712 Eval Board",
+	      easy50712_init);

target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/mach-fritz.c

@@ -0,0 +1,77 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/phy.h>
+
+#include <lantiq_soc.h>
+#include <irq.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+
+/*static struct mtd_partition fritz3370_partitions[] = {
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x10000,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x20000,
+		.size	= 0xe0000,
+	},
+	{
+		.name	= "rootfs",
+		.offset	= 0x100000,
+		.size	= 0x300000,
+	},
+};
+
+static struct physmap_flash_data fritz3370_flash_data = {
+	.nr_parts	= ARRAY_SIZE(fritz3370_partitions),
+	.parts		= fritz3370_partitions,
+};
+
+static struct ltq_pci_data ltq_pci_data = {
+	.clock	= PCI_CLOCK_INT,
+	.gpio	= PCI_GNT1 | PCI_REQ1,
+	.irq	= {
+		[14] = INT_NUM_IM0_IRL0 + 22,
+	},
+};
+*/
+static struct ltq_eth_data ltq_eth_data = {
+	.mii_mode = PHY_INTERFACE_MODE_MII,
+};
+
+extern void xway_register_nand(void);
+
+static void __init fritz3370_init(void)
+{
+//	ltq_register_gpio_stp();
+//	ltq_register_nor(&fritz3370_flash_data);
+//	ltq_register_pci(&ltq_pci_data);
+	ltq_register_etop(&ltq_eth_data);
+	xway_register_nand();
+}
+
+MIPS_MACHINE(LANTIQ_MACH_FRITZ3370,
+	     "FRITZ3370",
+	     "FRITZ!BOX 3370",
+	      fritz3370_init);

target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/mach-gigasx76x.c

@@ -0,0 +1,212 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2011 Andrej Vlašić
+ *  Copyright (C) 2011 Luka Perkov
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/ath5k_platform.h>
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/io.h>
+#include <linux/string.h>
+
+#include <irq.h>
+#include <lantiq_soc.h>
+#include <lantiq_platform.h>
+#include <dev-gpio-leds.h>
+#include <dev-gpio-buttons.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+#include "dev-dwc_otg.h"
+
+#define UBOOT_ENV_OFFSET	0x010000
+#define UBOOT_ENV_SIZE		0x010000
+
+static struct mtd_partition gigasx76x_partitions[] =
+{
+	{
+		.name	= "uboot",
+		.offset	= 0x000000,
+		.size	= 0x010000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= UBOOT_ENV_OFFSET,
+		.size	= UBOOT_ENV_SIZE,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x020000,
+		.size	= 0x7d0000,
+	},
+	{
+		.name	= "board_config",
+		.offset	= 0x7f0000,
+		.size	= 0x010000,
+	},
+};
+
+static struct gpio_led
+gigasx76x_gpio_leds[] __initdata = {
+	{ .name = "soc:green:usb", .gpio = 202, },
+	{ .name = "soc:green:wlan", .gpio = 203, },
+	{ .name = "soc:green:phone2", .gpio = 204, },
+	{ .name = "soc:green:phone1", .gpio = 205, },
+	{ .name = "soc:green:line", .gpio = 206, },
+	{ .name = "soc:green:online", .gpio = 207, },
+	{ .name = "soc:green:voip", .gpio = 208, },
+};
+
+static struct gpio_keys_button
+gigasx76x_gpio_keys[] __initdata = {
+{
+	.desc	= "restart",
+	.type	= EV_KEY,
+	.code	= KEY_RESTART,
+	.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+	.gpio	= 14,
+	.active_low	= 1,
+},
+{
+	.desc	= "wps",
+	.type	= EV_KEY,
+	.code	= KEY_WPS_BUTTON,
+	.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+	.gpio	= 22,
+	.active_low	= 1,
+},
+};
+
+static struct physmap_flash_data gigasx76x_flash_data = {
+	.nr_parts	= ARRAY_SIZE(gigasx76x_partitions),
+	.parts		= gigasx76x_partitions,
+};
+
+static struct ltq_pci_data ltq_pci_data = {
+	.clock	= PCI_CLOCK_INT,
+	.gpio	= PCI_GNT1 | PCI_REQ1,
+	.irq	= { [14] = INT_NUM_IM0_IRL0 + 22, },
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+	.mii_mode	= PHY_INTERFACE_MODE_MII,
+};
+
+static char __init *get_uboot_env_var(char *haystack, int haystack_len, char *needle, int needle_len) {
+	int i;
+	for (i = 0; i <= haystack_len - needle_len; i++) {
+		if (memcmp(haystack + i, needle, needle_len) == 0) {
+			return haystack + i + needle_len;
+		}
+	}
+	return NULL;
+}
+
+/*
+ * gigasx76x_parse_hex_* are not uniq. in arm/orion there are also duplicates:
+ * dns323_parse_hex_*
+ * TODO: one day write a patch for this :)
+ */
+static int __init gigasx76x_parse_hex_nibble(char n) {
+	if (n >= '0' && n <= '9')
+		return n - '0';
+
+	if (n >= 'A' && n <= 'F')
+		return n - 'A' + 10;
+
+	if (n >= 'a' && n <= 'f')
+		return n - 'a' + 10;
+
+	return -1;
+}
+
+static int __init gigasx76x_parse_hex_byte(const char *b) {
+	int hi;
+	int lo;
+
+	hi = gigasx76x_parse_hex_nibble(b[0]);
+	lo = gigasx76x_parse_hex_nibble(b[1]);
+
+	if (hi < 0 || lo < 0)
+		return -1;
+
+	return (hi << 4) | lo;
+}
+
+static int __init gigasx76x_register_ethernet(void) {
+	u_int8_t addr[6];
+	int i;
+	char *uboot_env_page;
+	char *mac;
+
+	uboot_env_page = ioremap(LTQ_FLASH_START + UBOOT_ENV_OFFSET, UBOOT_ENV_SIZE);
+	if (!uboot_env_page)
+		return -ENOMEM;
+
+	mac = get_uboot_env_var(uboot_env_page, UBOOT_ENV_SIZE, "\0ethaddr=", 9);
+
+	if (!mac) {
+	goto error_fail;
+	}
+
+	/* Sanity check the string we're looking at */
+	for (i = 0; i < 5; i++) {
+	if (*(mac + (i * 3) + 2) != ':') {
+		goto error_fail;
+		}
+	}
+
+	for (i = 0; i < 6; i++) {
+		int byte;
+		byte = gigasx76x_parse_hex_byte(mac + (i * 3));
+		if (byte < 0) {
+			goto error_fail;
+		}
+		addr[i] = byte;
+	}
+
+	iounmap(uboot_env_page);
+	printk("GIGASX76X: Found ethernet MAC address: ");
+	for (i = 0; i < 6; i++)
+		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
+
+	memcpy(&ltq_eth_data.mac.sa_data, addr, 6);
+	ltq_register_etop(&ltq_eth_data);
+
+	return 0;
+
+	error_fail:
+		iounmap(uboot_env_page);
+		return -EINVAL;
+}
+
+static void __init gigasx76x_init(void) {
+#define GIGASX76X_USB		29
+#define GIGASX76X_MADWIFI_ADDR	0xb07f0000
+
+	ltq_register_gpio_stp();
+	ltq_register_nor(&gigasx76x_flash_data);
+	ltq_register_pci(&ltq_pci_data);
+	gigasx76x_register_ethernet();
+	xway_register_dwc(GIGASX76X_USB);
+	ltq_register_tapi();
+	ltq_register_madwifi_eep(GIGASX76X_MADWIFI_ADDR);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(gigasx76x_gpio_leds), gigasx76x_gpio_leds);
+	ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(gigasx76x_gpio_keys), gigasx76x_gpio_keys);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_GIGASX76X, "GIGASX76X", "GIGASX76X - Gigaset SX761,SX762,SX763", gigasx76x_init);

target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/mach-netgear.c

@@ -0,0 +1,57 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/phy.h>
+#include <linux/spi/spi.h>
+
+#include <lantiq_soc.h>
+#include <irq.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+
+static struct ltq_pci_data ltq_pci_data = {
+	.clock	= PCI_CLOCK_INT,
+	.gpio	= PCI_GNT1 | PCI_REQ1,
+	.irq	= {
+		[14] = INT_NUM_IM0_IRL0 + 22,
+	},
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+	.mii_mode = PHY_INTERFACE_MODE_MII,
+};
+
+struct spi_board_info spi_info = {
+	.bus_num        = 0,
+	.chip_select    = 3,
+	.max_speed_hz   = 25000000,
+	.modalias       = "mx25l12805d",
+};
+
+struct ltq_spi_platform_data ltq_spi_data = {
+	.num_chipselect = 4,
+};
+
+static void __init dgn3500_init(void)
+{
+	ltq_register_pci(&ltq_pci_data);
+	ltq_register_etop(&ltq_eth_data);
+	ltq_register_spi(&ltq_spi_data, &spi_info, 1);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_DGN3500B,
+	     "DGN3500B",
+	     "Netgear DGN3500B",
+	      dgn3500_init);

target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/mach-wbmr.c

@@ -0,0 +1,120 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/gpio_buttons.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+
+#include <lantiq_soc.h>
+#include <irq.h>
+#include <dev-gpio-leds.h>
+#include <dev-gpio-buttons.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+#include "dev-dwc_otg.h"
+
+static struct mtd_partition wbmr_partitions[] =
+{
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x40000,
+	},
+	{
+		.name	= "uboot-env",
+		.offset	= 0x40000,
+		.size	= 0x20000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x60000,
+		.size	= 0x1f20000,
+	},
+	{
+		.name	= "calibration",
+		.offset	= 0x1fe0000,
+		.size	= 0x20000,
+	},
+};
+
+static struct physmap_flash_data wbmr_flash_data = {
+	.nr_parts	= ARRAY_SIZE(wbmr_partitions),
+	.parts		= wbmr_partitions,
+};
+
+static struct gpio_led
+wbmr_gpio_leds[] __initdata = {
+	{ .name = "soc:blue:movie", .gpio = 20, .active_low = 1, },
+	{ .name = "soc:red:internet", .gpio = 18, .active_low = 1, },
+	{ .name = "soc:green:internet", .gpio = 17, .active_low = 1, },
+	{ .name = "soc:green:adsl", .gpio = 16, .active_low = 1, },
+	{ .name = "soc:green:wlan", .gpio = 15, .active_low = 1, },
+	{ .name = "soc:red:security", .gpio = 14, .active_low = 1, },
+	{ .name = "soc:green:power", .gpio = 1, .active_low = 1, },
+	{ .name = "soc:red:power", .gpio = 5, .active_low = 1, },
+	{ .name = "soc:green:usb", .gpio = 28, .active_low = 1, },
+};
+
+static struct gpio_keys_button
+wbmr_gpio_keys[] __initdata = {
+	{
+		.desc = "aoss",
+		.type = EV_KEY,
+		.code = BTN_0,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio = 0,
+		.active_low = 1,
+	},
+	{
+		.desc = "reset",
+		.type = EV_KEY,
+		.code = BTN_1,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio = 37,
+		.active_low = 1,
+	},
+};
+
+static struct ltq_pci_data ltq_pci_data = {
+	.clock      = PCI_CLOCK_INT,
+	.gpio   = PCI_GNT1 | PCI_REQ1,
+	.irq    = {
+		[14] = INT_NUM_IM0_IRL0 + 22,
+	},
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+	.mii_mode = PHY_INTERFACE_MODE_RGMII,
+};
+
+static void __init
+wbmr_init(void)
+{
+#define WMBR_BRN_MAC			0x1fd0024
+
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(wbmr_gpio_leds), wbmr_gpio_leds);
+	ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(wbmr_gpio_keys), wbmr_gpio_keys);
+	ltq_register_nor(&wbmr_flash_data);
+	ltq_register_pci(&ltq_pci_data);
+	memcpy_fromio(&ltq_eth_data.mac.sa_data,
+		(void *)KSEG1ADDR(LTQ_FLASH_START + WMBR_BRN_MAC), 6);
+	ltq_register_etop(&ltq_eth_data);
+	xway_register_dwc(36);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_WBMR,
+			"WBMR",
+			"WBMR",
+			wbmr_init);