[kernel] update to 2.6.39.1

patch from Peter Wagner

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27104 3c298f89-4303-0410-b956-a3cf2f4a3e73

include/kernel-version.mk

@@ -26,8 +26,8 @@ endif
 ifeq ($(LINUX_VERSION),2.6.38.6)
   LINUX_KERNEL_MD5SUM:=e896a3bb3185b8a8af8e2f010f63c02e
 endif
-ifeq ($(LINUX_VERSION),2.6.39)
+ifeq ($(LINUX_VERSION),2.6.39.1)
-  LINUX_KERNEL_MD5SUM:=1aab7a741abe08d42e8eccf20de61e05
+  LINUX_KERNEL_MD5SUM:=983834b0138e102a3fb0098367c17150
 endif
 
 # disable the md5sum check for unknown kernel versions

target/linux/au1000/Makefile

@@ -13,7 +13,7 @@ FEATURES:=jffs2 usb pci
 SUBTARGETS=au1500 au1550
 MAINTAINER:=Florian Fainelli <florian@openwrt.org>
 
-LINUX_VERSION:=2.6.39
+LINUX_VERSION:=2.6.39.1
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += wpad-mini yamonenv

target/linux/au1000/patches-2.6.39/002-openwrt_rootfs.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/alchemy/mtx-1/platform.c
 +++ b/arch/mips/alchemy/mtx-1/platform.c
-@@ -90,7 +90,7 @@ static struct platform_device mtx1_gpio_
+@@ -92,7 +92,7 @@ static struct platform_device mtx1_gpio_
  
  static struct mtd_partition mtx1_mtd_partitions[] = {
  	{

target/linux/au1000/patches-2.6.39/003-au1000_eth_ioctl.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/au1000_eth.c
 +++ b/drivers/net/au1000_eth.c
-@@ -995,10 +995,14 @@ static void au1000_multicast_list(struct
+@@ -993,10 +993,14 @@ static void au1000_multicast_list(struct
  	writel(reg, &aup->mac->control);
  }
  

target/linux/cns3xxx/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs fpu gpio
 CFLAGS:=-Os -pipe -march=armv6k -mtune=mpcore -mfloat-abi=softfp -mfpu=vfp -fno-caller-saves
 MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
 
-LINUX_VERSION:=2.6.39
+LINUX_VERSION:=2.6.39.1
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/generic/patches-2.6.39/950-vm_exports.patch

@@ -1,6 +1,6 @@
 --- a/mm/shmem.c
 +++ b/mm/shmem.c
-@@ -2730,6 +2730,16 @@ out:
+@@ -2731,6 +2731,16 @@ out:
  
  /* common code */
  
@@ -17,7 +17,7 @@
  /**
   * shmem_file_setup - get an unlinked file living in tmpfs
   * @name: name for dentry (to be seen in /proc/<pid>/maps
-@@ -2807,10 +2817,7 @@ int shmem_zero_setup(struct vm_area_stru
+@@ -2808,10 +2818,7 @@ int shmem_zero_setup(struct vm_area_stru
  	if (IS_ERR(file))
  		return PTR_ERR(file);
  

target/linux/lantiq/Makefile

@@ -12,8 +12,7 @@ BOARDNAME:=Lantiq GPON/XWAY
 FEATURES:=squashfs jffs2
 SUBTARGETS:=falcon xway ase
 
-LINUX_VERSION:=2.6.39
+LINUX_VERSION:=2.6.39.1
-#LINUX_VERSION:=2.6.32.33
 
 CFLAGS=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves
 

target/linux/lantiq/patches-2.6.39/0001-MIPS-Lantiq-Add-initial-support-for-Lantiq-SoCs.patch

@@ -48,7 +48,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -212,6 +212,23 @@
+@@ -212,6 +212,23 @@ config MACH_JZ4740
  	select HAVE_PWM
  	select HAVE_CLK
  
@@ -884,7 +884,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 +}
 --- a/arch/mips/Kbuild.platforms
 +++ b/arch/mips/Kbuild.platforms
-@@ -11,6 +11,7 @@
+@@ -11,6 +11,7 @@ platforms += dec
  platforms += emma
  platforms += jazz
  platforms += jz4740

target/linux/lantiq/patches-2.6.39/0002-MIPS-Lantiq-add-SoC-specific-code-for-XWAY-family.patch

@@ -65,7 +65,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -760,6 +760,7 @@
+@@ -760,6 +760,7 @@ source "arch/mips/ath79/Kconfig"
  source "arch/mips/bcm63xx/Kconfig"
  source "arch/mips/jazz/Kconfig"
  source "arch/mips/jz4740/Kconfig"

target/linux/lantiq/patches-2.6.39/0003-MIPS-Lantiq-Add-PCI-controller-support.patch

@@ -28,9 +28,6 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  create mode 100644 arch/mips/pci/pci-lantiq.c
  create mode 100644 arch/mips/pci/pci-lantiq.h
 
-diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_platform.h b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
-new file mode 100644
-index 0000000..1f1dba6
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
 @@ -0,0 +1,46 @@
@@ -80,11 +77,9 @@ index 0000000..1f1dba6
 +};
 +
 +#endif
-diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
-index f0d5329..4df8799 100644
 --- a/arch/mips/pci/Makefile
 +++ b/arch/mips/pci/Makefile
-@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_SB1250)	+= fixup-sb1250.o pci-sb1250.o
+@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_SB1250)	+= fixup-sb1
  obj-$(CONFIG_SIBYTE_BCM112X)	+= fixup-sb1250.o pci-sb1250.o
  obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1480.o pci-bcm1480ht.o
  obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
@@ -92,9 +87,6 @@ index f0d5329..4df8799 100644
  obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
  obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
  obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
-diff --git a/arch/mips/pci/ops-lantiq.c b/arch/mips/pci/ops-lantiq.c
-new file mode 100644
-index 0000000..1f2afb5
 --- /dev/null
 +++ b/arch/mips/pci/ops-lantiq.c
 @@ -0,0 +1,116 @@
@@ -214,9 +206,6 @@ index 0000000..1f2afb5
 +
 +	return PCIBIOS_SUCCESSFUL;
 +}
-diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
-new file mode 100644
-index 0000000..603d749
 --- /dev/null
 +++ b/arch/mips/pci/pci-lantiq.c
 @@ -0,0 +1,297 @@
@@ -517,9 +506,6 @@ index 0000000..603d749
 +}
 +
 +arch_initcall(pcibios_init);
-diff --git a/arch/mips/pci/pci-lantiq.h b/arch/mips/pci/pci-lantiq.h
-new file mode 100644
-index 0000000..66bf6cd
 --- /dev/null
 +++ b/arch/mips/pci/pci-lantiq.h
 @@ -0,0 +1,18 @@
@@ -541,6 +527,3 @@ index 0000000..66bf6cd
 +	unsigned int devfn, int where, int size, u32 val);
 +
 +#endif
--- 
-1.7.2.3
-

target/linux/lantiq/patches-2.6.39/0004-MIPS-Lantiq-Add-NOR-flash-support.patch

@@ -24,7 +24,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 
 --- a/drivers/mtd/maps/Kconfig
 +++ b/drivers/mtd/maps/Kconfig
-@@ -260,6 +260,13 @@
+@@ -260,6 +260,13 @@ config MTD_BCM963XX
  	  Support for parsing CFE image tag and creating MTD partitions on
  	  Broadcom BCM63xx boards.
  
@@ -40,7 +40,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  	depends on X86 && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
 --- a/drivers/mtd/maps/Makefile
 +++ b/drivers/mtd/maps/Makefile
-@@ -60,3 +60,4 @@
+@@ -60,3 +60,4 @@ obj-$(CONFIG_MTD_VMU)		+= vmu-flash.o
  obj-$(CONFIG_MTD_GPIO_ADDR)	+= gpio-addr-flash.o
  obj-$(CONFIG_MTD_BCM963XX)	+= bcm963xx-flash.o
  obj-$(CONFIG_MTD_LATCH_ADDR)	+= latch-addr-flash.o

target/linux/lantiq/patches-2.6.39/0005-MIPS-Lantiq-Add-platform-device-support.patch

@@ -25,8 +25,6 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  create mode 100644 arch/mips/lantiq/xway/devices.c
  create mode 100644 arch/mips/lantiq/xway/devices.h
 
-diff --git a/arch/mips/lantiq/Makefile b/arch/mips/lantiq/Makefile
-index a268391..e5dae0e 100644
 --- a/arch/mips/lantiq/Makefile
 +++ b/arch/mips/lantiq/Makefile
 @@ -4,7 +4,7 @@
@@ -38,9 +36,6 @@ index a268391..e5dae0e 100644
  
  obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
  
-diff --git a/arch/mips/lantiq/devices.c b/arch/mips/lantiq/devices.c
-new file mode 100644
-index 0000000..7b82c34
 --- /dev/null
 +++ b/arch/mips/lantiq/devices.c
 @@ -0,0 +1,122 @@
@@ -166,9 +161,6 @@ index 0000000..7b82c34
 +	pr_err("kernel is compiled without PCI support\n");
 +}
 +#endif
-diff --git a/arch/mips/lantiq/devices.h b/arch/mips/lantiq/devices.h
-new file mode 100644
-index 0000000..2947bb1
 --- /dev/null
 +++ b/arch/mips/lantiq/devices.h
 @@ -0,0 +1,23 @@
@@ -195,8 +187,6 @@ index 0000000..2947bb1
 +extern void ltq_register_pci(struct ltq_pci_data *data);
 +
 +#endif
-diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
-index 9c85ff9..74ce438 100644
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
 @@ -1,4 +1,4 @@
@@ -205,9 +195,6 @@ index 9c85ff9..74ce438 100644
  
  obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o
  obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o
-diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c
-new file mode 100644
-index 0000000..a71b3b5
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/devices.c
 @@ -0,0 +1,98 @@
@@ -309,9 +296,6 @@ index 0000000..a71b3b5
 +	platform_device_register_simple("ltq_asc", 0,
 +		ltq_ase_asc_resources, ARRAY_SIZE(ltq_ase_asc_resources));
 +}
-diff --git a/arch/mips/lantiq/xway/devices.h b/arch/mips/lantiq/xway/devices.h
-new file mode 100644
-index 0000000..51f56b5
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/devices.h
 @@ -0,0 +1,18 @@
@@ -333,6 +317,3 @@ index 0000000..51f56b5
 +extern void ltq_register_ase_asc(void);
 +
 +#endif
--- 
-1.7.2.3
-

target/linux/lantiq/patches-2.6.39/0006-MIPS-Lantiq-Add-mips_machine-support.patch

@@ -27,7 +27,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -190,6 +190,7 @@
+@@ -228,6 +228,7 @@ config LANTIQ
  	select SWAP_IO_SPACE
  	select BOOT_RAW
  	select HAVE_CLK
@@ -58,7 +58,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 +#endif
 --- a/arch/mips/lantiq/prom.h
 +++ b/arch/mips/lantiq/prom.h
-@@ -20,5 +20,6 @@
+@@ -20,5 +20,6 @@ struct ltq_soc_info {
  };
  
  extern void ltq_soc_detect(struct ltq_soc_info *i);
@@ -80,7 +80,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  void __init plat_mem_setup(void)
  {
  	/* assume 16M as default incase uboot fails to pass proper ramsize */
-@@ -32,10 +38,32 @@
+@@ -32,10 +38,32 @@ void __init plat_mem_setup(void)
  		if (!strncmp(e, "memsize=", 8)) {
  			e += 8;
  			if (strict_strtoul(e, 0, &memsize))

target/linux/lantiq/patches-2.6.39/0007-MIPS-Lantiq-Add-machtypes-for-lantiq-eval-kits.patch

@@ -24,8 +24,6 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  create mode 100644 arch/mips/lantiq/xway/mach-easy50601.c
  create mode 100644 arch/mips/lantiq/xway/mach-easy50712.c
 
-diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
-index 2780461..3fccf21 100644
 --- a/arch/mips/lantiq/Kconfig
 +++ b/arch/mips/lantiq/Kconfig
 @@ -18,4 +18,6 @@ config SOC_XWAY
@@ -35,8 +33,6 @@ index 2780461..3fccf21 100644
 +source "arch/mips/lantiq/xway/Kconfig"
 +
  endif
-diff --git a/arch/mips/lantiq/machtypes.h b/arch/mips/lantiq/machtypes.h
-index ffcacfc..7e01b8c 100644
 --- a/arch/mips/lantiq/machtypes.h
 +++ b/arch/mips/lantiq/machtypes.h
 @@ -13,6 +13,8 @@
@@ -48,9 +44,6 @@ index ffcacfc..7e01b8c 100644
  };
  
  #endif
-diff --git a/arch/mips/lantiq/xway/Kconfig b/arch/mips/lantiq/xway/Kconfig
-new file mode 100644
-index 0000000..2b857de
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/Kconfig
 @@ -0,0 +1,23 @@
@@ -77,20 +70,15 @@ index 0000000..2b857de
 +endmenu
 +
 +endif
-diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
-index 8c06a97..b1d3640 100644
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
-@@ -2,3 +2,6 @@ obj-y := pmu.o ebu.o reset.o gpio.o devices.o
+@@ -2,3 +2,6 @@ obj-y := pmu.o ebu.o reset.o gpio.o devi
  
  obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o
  obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o
 +
 +obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
 +obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
-diff --git a/arch/mips/lantiq/xway/mach-easy50601.c b/arch/mips/lantiq/xway/mach-easy50601.c
-new file mode 100644
-index 0000000..d5aaf63
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/mach-easy50601.c
 @@ -0,0 +1,57 @@
@@ -151,9 +139,6 @@ index 0000000..d5aaf63
 +			"EASY50601",
 +			"EASY50601 Eval Board",
 +			easy50601_init);
-diff --git a/arch/mips/lantiq/xway/mach-easy50712.c b/arch/mips/lantiq/xway/mach-easy50712.c
-new file mode 100644
-index 0000000..e5e7e09
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/mach-easy50712.c
 @@ -0,0 +1,68 @@
@@ -225,6 +210,3 @@ index 0000000..e5e7e09
 +	     "EASY50712",
 +	     "EASY50712 Eval Board",
 +	      easy50712_init);
--- 
-1.7.2.3
-

target/linux/lantiq/patches-2.6.39/0008-MIPS-Lantiq-Add-more-gpio-drivers.patch

@@ -20,8 +20,6 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  create mode 100644 arch/mips/lantiq/xway/gpio_ebu.c
  create mode 100644 arch/mips/lantiq/xway/gpio_stp.c
 
-diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
-index b1d3640..6b5e07e 100644
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
 @@ -1,4 +1,4 @@
@@ -30,9 +28,6 @@ index b1d3640..6b5e07e 100644
  
  obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o
  obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o
-diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c
-new file mode 100644
-index 0000000..a479355
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/gpio_ebu.c
 @@ -0,0 +1,126 @@
@@ -162,9 +157,6 @@ index 0000000..a479355
 +}
 +
 +postcore_initcall(ltq_ebu_init);
-diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
-new file mode 100644
-index 0000000..67d59d6
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/gpio_stp.c
 @@ -0,0 +1,157 @@
@@ -325,6 +317,3 @@ index 0000000..67d59d6
 +}
 +
 +postcore_initcall(ltq_stp_init);
--- 
-1.7.2.3
-

target/linux/lantiq/patches-2.6.39/0009-SERIAL-Lantiq-Add-driver-for-MIPS-Lantiq-SOCs.patch

@@ -780,7 +780,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 +MODULE_LICENSE("GPL");
 --- a/drivers/tty/serial/Kconfig
 +++ b/drivers/tty/serial/Kconfig
-@@ -1391,6 +1391,14 @@
+@@ -1391,6 +1391,14 @@ config SERIAL_OF_PLATFORM_NWPSERIAL_CONS
  	help
  	  Support for Console on the NWP serial ports.
  
@@ -797,7 +797,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  	depends on QUICC_ENGINE
 --- a/drivers/tty/serial/Makefile
 +++ b/drivers/tty/serial/Makefile
-@@ -94,3 +94,4 @@
+@@ -94,3 +94,4 @@ obj-$(CONFIG_SERIAL_IFX6X60)  	+= ifx6x6
  obj-$(CONFIG_SERIAL_PCH_UART)	+= pch_uart.o
  obj-$(CONFIG_SERIAL_MSM_SMD)	+= msm_smd_tty.o
  obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o

target/linux/lantiq/patches-2.6.39/0010-MIPS-Lantiq-Add-DMA-support.patch

@@ -21,8 +21,6 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  create mode 100644 arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
  create mode 100644 arch/mips/lantiq/xway/dma.c
 
-diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-index 343e82c..4827afb 100644
 --- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
 +++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
 @@ -86,7 +86,8 @@
@@ -35,9 +33,6 @@ index 343e82c..4827afb 100644
  
  /* PCI */
  #define PCI_CR_BASE_ADDR	0x1E105400
-diff --git a/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
-new file mode 100644
-index 0000000..872943a
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
 @@ -0,0 +1,60 @@
@@ -101,8 +96,6 @@ index 0000000..872943a
 +extern void ltq_dma_init_port(int p);
 +
 +#endif
-diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
-index 6b5e07e..c517f2e 100644
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
 @@ -1,4 +1,4 @@
@@ -111,8 +104,6 @@ index 6b5e07e..c517f2e 100644
  
  obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o
  obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o
-diff --git a/arch/mips/lantiq/xway/devices.h b/arch/mips/lantiq/xway/devices.h
-index 51f56b5..d573084 100644
 --- a/arch/mips/lantiq/xway/devices.h
 +++ b/arch/mips/lantiq/xway/devices.h
 @@ -10,6 +10,7 @@
@@ -123,9 +114,6 @@ index 51f56b5..d573084 100644
  
  extern void ltq_register_gpio(void);
  extern void ltq_register_gpio_stp(void);
-diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
-new file mode 100644
-index 0000000..4278a45
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/dma.c
 @@ -0,0 +1,253 @@
@@ -382,6 +370,3 @@ index 0000000..4278a45
 +}
 +
 +postcore_initcall(ltq_dma_init);
--- 
-1.7.2.3
-

target/linux/lantiq/patches-2.6.39/0011-MIPS-Lantiq-Add-ethernet-driver.patch

@@ -36,7 +36,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  
  /* struct used to pass info to the pci core */
  enum {
-@@ -43,4 +44,10 @@
+@@ -43,4 +44,10 @@ struct ltq_pci_data {
  	int irq[16];
  };
  
@@ -62,7 +62,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  #define LTQ_DMA_BASE_ADDR	0x1E104100
 --- a/arch/mips/lantiq/xway/devices.c
 +++ b/arch/mips/lantiq/xway/devices.c
-@@ -96,3 +96,26 @@
+@@ -96,3 +96,26 @@ void __init ltq_register_ase_asc(void)
  	platform_device_register_simple("ltq_asc", 0,
  		ltq_ase_asc_resources, ARRAY_SIZE(ltq_ase_asc_resources));
  }
@@ -100,7 +100,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  #endif
 --- a/drivers/net/Kconfig
 +++ b/drivers/net/Kconfig
-@@ -2017,6 +2017,13 @@
+@@ -2017,6 +2017,13 @@ config FTMAC100
  	  from Faraday. It is used on Faraday A320, Andes AG101 and some
  	  other ARM/NDS32 SoC's.
  
@@ -116,7 +116,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  source "drivers/net/octeon/Kconfig"
 --- a/drivers/net/Makefile
 +++ b/drivers/net/Makefile
-@@ -259,6 +259,7 @@
+@@ -259,6 +259,7 @@ obj-$(CONFIG_MLX4_CORE) += mlx4/
  obj-$(CONFIG_ENC28J60) += enc28j60.o
  obj-$(CONFIG_ETHOC) += ethoc.o
  obj-$(CONFIG_GRETH) += greth.o

target/linux/lantiq/patches-2.6.39/0012-MIPS-Lantiq-Add-etop-board-support.patch

@@ -16,8 +16,6 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  arch/mips/lantiq/xway/mach-easy50712.c |    6 ++++++
  1 files changed, 6 insertions(+), 0 deletions(-)
 
-diff --git a/arch/mips/lantiq/xway/mach-easy50712.c b/arch/mips/lantiq/xway/mach-easy50712.c
-index e5e7e09..ea5027b 100644
 --- a/arch/mips/lantiq/xway/mach-easy50712.c
 +++ b/arch/mips/lantiq/xway/mach-easy50712.c
 @@ -12,6 +12,7 @@
@@ -28,7 +26,7 @@ index e5e7e09..ea5027b 100644
  
  #include <lantiq_soc.h>
  #include <irq.h>
-@@ -55,11 +56,16 @@ static struct ltq_pci_data ltq_pci_data = {
+@@ -55,11 +56,16 @@ static struct ltq_pci_data ltq_pci_data
  	},
  };
  
@@ -45,6 +43,3 @@ index e5e7e09..ea5027b 100644
  }
  
  MIPS_MACHINE(LTQ_MACH_EASY50712,
--- 
-1.7.2.3
-

target/linux/lantiq/patches-2.6.39/0013-MIPS-Lantiq-Add-watchdog-support.patch

@@ -21,7 +21,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 
 --- a/drivers/watchdog/Kconfig
 +++ b/drivers/watchdog/Kconfig
-@@ -990,6 +990,12 @@
+@@ -990,6 +990,12 @@ config BCM63XX_WDT
  	  To compile this driver as a loadable module, choose M here.
  	  The module will be called bcm63xx_wdt.
  
@@ -36,7 +36,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  # POWERPC Architecture
 --- a/drivers/watchdog/Makefile
 +++ b/drivers/watchdog/Makefile
-@@ -123,6 +123,7 @@
+@@ -123,6 +123,7 @@ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
  obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
  obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
  octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o

target/linux/lantiq/patches-2.6.39/110-falcon_board.patch

@@ -1694,7 +1694,7 @@
 +#endif
 --- a/arch/mips/lantiq/Kconfig
 +++ b/arch/mips/lantiq/Kconfig
-@@ -16,8 +16,12 @@
+@@ -16,8 +16,12 @@ config SOC_XWAY
  	bool "XWAY"
  	select SOC_TYPE_XWAY
  	select HW_HAS_PCI
@@ -1709,21 +1709,21 @@
  endif
 --- a/arch/mips/lantiq/Makefile
 +++ b/arch/mips/lantiq/Makefile
-@@ -9,3 +9,4 @@
+@@ -9,3 +9,4 @@ obj-y := irq.o setup.o clk.o prom.o devi
  obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
  
  obj-$(CONFIG_SOC_TYPE_XWAY) += xway/
 +obj-$(CONFIG_SOC_FALCON) += falcon/
 --- a/arch/mips/lantiq/Platform
 +++ b/arch/mips/lantiq/Platform
-@@ -6,3 +6,4 @@
+@@ -6,3 +6,4 @@ platform-$(CONFIG_LANTIQ)	+= lantiq/
  cflags-$(CONFIG_LANTIQ)		+= -I$(srctree)/arch/mips/include/asm/mach-lantiq
  load-$(CONFIG_LANTIQ)		= 0xffffffff80002000
  cflags-$(CONFIG_SOC_TYPE_XWAY)	+= -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway
 +cflags-$(CONFIG_SOC_FALCON)	+= -I$(srctree)/arch/mips/include/asm/mach-lantiq/falcon
 --- a/arch/mips/lantiq/machtypes.h
 +++ b/arch/mips/lantiq/machtypes.h
-@@ -15,6 +15,11 @@
+@@ -15,6 +15,11 @@ enum lantiq_mach_type {
  	LTQ_MACH_GENERIC = 0,
  	LTQ_MACH_EASY50712,	/* Danube evaluation board */
  	LTQ_MACH_EASY50601,	/* Amazon SE evaluation board */

target/linux/lantiq/patches-2.6.39/120-falcon-i2c.patch

@@ -1,16 +1,15 @@
 --- a/drivers/i2c/busses/Makefile
 +++ b/drivers/i2c/busses/Makefile
-@@ -74,6 +74,7 @@
+@@ -82,5 +82,6 @@ obj-$(CONFIG_I2C_SIBYTE)	+= i2c-sibyte.o
  obj-$(CONFIG_I2C_STUB)		+= i2c-stub.o
  obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
  obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
 +obj-$(CONFIG_I2C_FALCON)	+= i2c-falcon.o
  
- ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
+ ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
- EXTRA_CFLAGS += -DDEBUG
 --- a/drivers/i2c/busses/Kconfig
 +++ b/drivers/i2c/busses/Kconfig
-@@ -278,6 +278,10 @@
+@@ -282,6 +282,10 @@ config I2C_POWERMAC
  
  comment "I2C system bus drivers (mostly embedded / system-on-chip)"
  

target/linux/lantiq/patches-2.6.39/130-falcon-spi-flash.patch

@@ -1,6 +1,6 @@
 --- a/drivers/spi/Makefile
 +++ b/drivers/spi/Makefile
-@@ -55,6 +55,7 @@
+@@ -55,6 +55,7 @@ obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.
  obj-$(CONFIG_SPI_SH_MSIOF)		+= spi_sh_msiof.o
  obj-$(CONFIG_SPI_STMP3XXX)		+= spi_stmp.o
  obj-$(CONFIG_SPI_NUC900)		+= spi_nuc900.o
@@ -484,7 +484,7 @@
 +MODULE_DESCRIPTION("Lantiq Falcon SPI controller driver");
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -210,6 +210,10 @@
+@@ -210,6 +210,10 @@ config SPI_MPC52xx
  	  This drivers supports the MPC52xx SPI controller in master SPI
  	  mode.
  

target/linux/lantiq/patches-2.6.39/150-falcon-easy98020.patch

@@ -100,7 +100,7 @@
 +			easy98020_init);
 --- a/arch/mips/lantiq/falcon/Kconfig
 +++ b/arch/mips/lantiq/falcon/Kconfig
-@@ -6,6 +6,10 @@
+@@ -6,6 +6,10 @@ config LANTIQ_MACH_EASY98000
  	bool "Easy98000"
  	default y
  
@@ -113,7 +113,7 @@
  endif
 --- a/arch/mips/lantiq/falcon/Makefile
 +++ b/arch/mips/lantiq/falcon/Makefile
-@@ -2,3 +2,4 @@
+@@ -2,3 +2,4 @@ obj-y := clk-falcon.o devices.o gpio.o p
  obj-y += softdog_vpe.o
  obj-$(CONFIG_LANTIQ_MACH_EASY98000) += mach-easy98000.o
  obj-$(CONFIG_LANTIQ_MACH_EASY98000) += dev-leds-easy98000-cpld.o

target/linux/lantiq/patches-2.6.39/160-falcon-95C3AM1.patch

@@ -106,7 +106,7 @@
 +			board_95C3AM1_init);
 --- a/arch/mips/lantiq/falcon/Kconfig
 +++ b/arch/mips/lantiq/falcon/Kconfig
-@@ -10,6 +10,10 @@
+@@ -10,6 +10,10 @@ config LANTIQ_MACH_EASY98020
  	bool "Easy98020"
  	default y
  
@@ -119,14 +119,14 @@
  endif
 --- a/arch/mips/lantiq/falcon/Makefile
 +++ b/arch/mips/lantiq/falcon/Makefile
-@@ -3,3 +3,4 @@
+@@ -3,3 +3,4 @@ obj-y += softdog_vpe.o
  obj-$(CONFIG_LANTIQ_MACH_EASY98000) += mach-easy98000.o
  obj-$(CONFIG_LANTIQ_MACH_EASY98000) += dev-leds-easy98000-cpld.o
  obj-$(CONFIG_LANTIQ_MACH_EASY98020) += mach-easy98020.o
 +obj-$(CONFIG_LANTIQ_MACH_95C3AM1)   += mach-95C3AM1.o
 --- a/arch/mips/lantiq/machtypes.h
 +++ b/arch/mips/lantiq/machtypes.h
-@@ -20,6 +20,7 @@
+@@ -20,6 +20,7 @@ enum lantiq_mach_type {
  	LANTIQ_MACH_EASY98000,		/* Falcon Eval Board, NOR Flash */
  	LANTIQ_MACH_EASY98000SF,	/* Falcon Eval Board, Serial Flash */
  	LANTIQ_MACH_EASY98020,		/* Falcon Reference Board */

target/linux/lantiq/patches-2.6.39/200-mach-arv45xx.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/lantiq/xway/Kconfig
 +++ b/arch/mips/lantiq/xway/Kconfig
-@@ -6,6 +6,10 @@
+@@ -6,6 +6,10 @@ config LANTIQ_MACH_EASY50712
  	bool "Easy50712 - Danube"
  	default y
  
@@ -13,7 +13,7 @@
  endif
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
-@@ -5,3 +5,4 @@
+@@ -5,3 +5,4 @@ obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o
  
  obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
  obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
@@ -527,7 +527,7 @@
 +			arv752dpw22_init);
 --- a/arch/mips/lantiq/machtypes.h
 +++ b/arch/mips/lantiq/machtypes.h
-@@ -21,6 +21,17 @@
+@@ -21,6 +21,17 @@ enum lantiq_mach_type {
  	LANTIQ_MACH_EASY98000SF,	/* Falcon Eval Board, Serial Flash */
  	LANTIQ_MACH_EASY98020,		/* Falcon Reference Board */
  	LANTIQ_MACH_95C3AM1,		/* Board 95C3AM1 */

target/linux/lantiq/patches-2.6.39/210-mtd_uimage_split.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/Kconfig
 +++ b/drivers/mtd/Kconfig
-@@ -63,6 +63,10 @@
+@@ -57,6 +57,10 @@ config MTD_ROOTFS_SPLIT
  	depends on MTD_PARTITIONS
  	default y
  
@@ -10,10 +10,10 @@
 +
  config MTD_REDBOOT_PARTS
  	tristate "RedBoot partition table parsing"
- 	depends on MTD_PARTITIONS
+ 	---help---
 --- a/drivers/mtd/mtdpart.c
 +++ b/drivers/mtd/mtdpart.c
-@@ -724,6 +724,82 @@
+@@ -860,6 +860,82 @@ static int refresh_rootfs_split(struct m
  }
  #endif /* CONFIG_MTD_ROOTFS_SPLIT */
  
@@ -96,9 +96,9 @@
  /*
   * This function, given a master MTD object and a partition table, creates
   * and registers slave MTD objects which are bound to the master according to
-@@ -748,6 +824,17 @@
+@@ -893,6 +969,17 @@ int add_mtd_partitions(struct mtd_info *
- 		if (!slave)
+ 
- 			return -ENOMEM;
+ 		add_mtd_device(&slave->mtd);
  
 +#ifdef CONFIG_MTD_UIMAGE_SPLIT
 +		if (!strcmp(parts[i].name, "linux")) {

target/linux/lantiq/patches-2.6.39/220-atm_hack.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/mm/cache.c
 +++ b/arch/mips/mm/cache.c
-@@ -52,6 +52,8 @@
+@@ -52,6 +52,8 @@ void (*_dma_cache_wback)(unsigned long s
  void (*_dma_cache_inv)(unsigned long start, unsigned long size);
  
  EXPORT_SYMBOL(_dma_cache_wback_inv);
@@ -11,7 +11,7 @@
  
 --- a/net/atm/proc.c
 +++ b/net/atm/proc.c
-@@ -154,7 +154,7 @@
+@@ -154,7 +154,7 @@ static void *vcc_seq_next(struct seq_fil
  static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc)
  {
  	static const char *const class_name[] = {
@@ -22,7 +22,7 @@
  		"???",	"5",	"???",	"???",	/*  4- 7 */
 --- a/net/atm/common.c
 +++ b/net/atm/common.c
-@@ -62,11 +62,17 @@
+@@ -62,11 +62,17 @@ static void vcc_remove_socket(struct soc
  	write_unlock_irq(&vcc_sklist_lock);
  }
  

target/linux/lantiq/patches-2.6.39/230-cmdline_hack.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/lantiq/prom.c
 +++ b/arch/mips/lantiq/prom.c
-@@ -39,6 +39,34 @@
+@@ -39,6 +39,34 @@ void prom_free_prom_memory(void)
  {
  }
  
@@ -35,7 +35,7 @@
  static void __init prom_init_cmdline(void)
  {
  	int argc = fw_arg0;
-@@ -53,6 +81,7 @@
+@@ -53,6 +81,7 @@ static void __init prom_init_cmdline(voi
  			strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
  		}
  	}

target/linux/lantiq/patches-2.6.39/240-udp_redirect.patch

@@ -249,7 +249,7 @@
 +#endif /* CONFIG_IFX_UDP_REDIRECT* */
 --- a/net/ipv4/Makefile
 +++ b/net/ipv4/Makefile
-@@ -14,6 +14,9 @@
+@@ -14,6 +14,9 @@ obj-y     := route.o inetpeer.o protocol
  	     inet_fragment.o
  
  obj-$(CONFIG_SYSCTL) += sysctl_net_ipv4.o
@@ -272,7 +272,7 @@
  struct udp_table udp_table __read_mostly;
  EXPORT_SYMBOL(udp_table);
  
-@@ -802,7 +806,7 @@
+@@ -802,7 +806,7 @@ int udp_sendmsg(struct kiocb *iocb, stru
  	u8  tos;
  	int err, is_udplite = IS_UDPLITE(sk);
  	int corkreq = up->corkflag || msg->msg_flags&MSG_MORE;
@@ -281,7 +281,7 @@
  	struct sk_buff *skb;
  
  	if (len > 0xFFFF)
-@@ -818,7 +822,13 @@
+@@ -818,7 +822,13 @@ int udp_sendmsg(struct kiocb *iocb, stru
  	ipc.opt = NULL;
  	ipc.tx_flags = 0;
  
@@ -296,7 +296,7 @@
  
  	if (up->pending) {
  		/*
-@@ -1608,6 +1618,7 @@
+@@ -1608,6 +1618,7 @@ int __udp4_lib_rcv(struct sk_buff *skb,
  	struct rtable *rt = skb_rtable(skb);
  	__be32 saddr, daddr;
  	struct net *net = dev_net(skb->dev);
@@ -304,7 +304,7 @@
  
  	/*
  	 *  Validate the packet.
-@@ -1640,7 +1651,16 @@
+@@ -1640,7 +1651,16 @@ int __udp4_lib_rcv(struct sk_buff *skb,
  	sk = __udp4_lib_lookup_skb(skb, uh->source, uh->dest, udptable);
  
  	if (sk != NULL) {
@@ -322,7 +322,7 @@
  		sock_put(sk);
  
  		/* a return value > 0 means to resubmit the input, but
-@@ -1937,7 +1957,7 @@
+@@ -1937,7 +1957,7 @@ struct proto udp_prot = {
  	.clear_sk	   = sk_prot_clear_portaddr_nulls,
  };
  EXPORT_SYMBOL(udp_prot);
@@ -333,7 +333,7 @@
  
 --- a/net/Kconfig
 +++ b/net/Kconfig
-@@ -72,6 +72,12 @@
+@@ -72,6 +72,12 @@ config INET
  
  	  Short answer: say Y.
  

target/linux/lantiq/patches-2.6.39/250-mt-vpe.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -1871,6 +1871,28 @@
+@@ -1871,6 +1871,28 @@ config MIPS_VPE_LOADER
  	  Includes a loader for loading an elf relocatable object
  	  onto another VPE and running it.
  
@@ -110,7 +110,7 @@
  /* TCStatus fields (per TC) */
  #define TCSTATUS_TASID		(_ULCAST_(0xff))
  #define TCSTATUS_IXMT_SHIFT	10
-@@ -350,6 +390,14 @@
+@@ -350,6 +390,14 @@ do {									\
  #define write_vpe_c0_vpecontrol(val)	mttc0(1, 1, val)
  #define read_vpe_c0_vpeconf0()		mftc0(1, 2)
  #define write_vpe_c0_vpeconf0(val)	mttc0(1, 2, val)
@@ -125,7 +125,7 @@
  #define read_vpe_c0_count()		mftc0(9, 0)
  #define write_vpe_c0_count(val)		mttc0(9, 0, val)
  #define read_vpe_c0_status()		mftc0(12, 0)
-@@ -381,6 +429,12 @@
+@@ -381,6 +429,12 @@ do {									\
  #define write_tc_c0_tchalt(val)		mttc0(2, 4, val)
  #define read_tc_c0_tccontext()		mftc0(2, 5)
  #define write_tc_c0_tccontext(val)	mttc0(2, 5, val)
@@ -140,7 +140,7 @@
  #define read_tc_gpr_sp()		mftgpr(29)
 --- a/arch/mips/kernel/Makefile
 +++ b/arch/mips/kernel/Makefile
-@@ -85,7 +85,8 @@
+@@ -85,7 +85,8 @@ obj-$(CONFIG_MIPS32_O32)	+= binfmt_elfo3
  
  obj-$(CONFIG_KGDB)		+= kgdb.o
  obj-$(CONFIG_PROC_FS)		+= proc.o
@@ -254,7 +254,7 @@
  
  /*
   * Dump new MIPS MT state for the core. Does not leave TCs halted.
-@@ -78,18 +148,18 @@
+@@ -78,18 +148,18 @@ void mips_mt_regdump(unsigned long mvpct
  			if ((read_tc_c0_tcbind() & TCBIND_CURVPE) == i) {
  				printk("  VPE %d\n", i);
  				printk("   VPEControl : %08lx\n",
@@ -280,7 +280,7 @@
  				break; /* Next VPE */
  			}
  		}
-@@ -287,6 +357,9 @@
+@@ -287,6 +357,9 @@ void mips_mt_set_cpuoptions(void)
  		printk("Mapped %ld ITC cells starting at 0x%08x\n",
  			((itcblkgrn & 0x7fe00000) >> 20), itc_base);
  	}
@@ -300,7 +300,7 @@
  #include <asm/bootinfo.h>
  #include <asm/cpu.h>
  #include <asm/cpu-features.h>
-@@ -110,3 +111,19 @@
+@@ -110,3 +111,19 @@ const struct seq_operations cpuinfo_op =
  	.stop	= c_stop,
  	.show	= show_cpuinfo,
  };
@@ -322,7 +322,7 @@
 +}
 --- a/arch/mips/kernel/smtc.c
 +++ b/arch/mips/kernel/smtc.c
-@@ -1334,6 +1334,13 @@
+@@ -1334,6 +1334,13 @@ void smtc_get_new_mmu_context(struct mm_
  	asid = asid_cache(cpu);
  
  	do {
@@ -338,7 +338,7 @@
  				flush_icache_all();
 --- a/arch/mips/kernel/vpe.c
 +++ b/arch/mips/kernel/vpe.c
-@@ -76,6 +76,58 @@
+@@ -76,6 +76,58 @@ static struct kspd_notifications kspd_ev
  static int kspd_events_reqd;
  #endif
  
@@ -397,7 +397,7 @@
  /* grab the likely amount of memory we will need. */
  #ifdef CONFIG_MIPS_VPE_LOADER_TOM
  #define P_SIZE (2 * 1024 * 1024)
-@@ -268,6 +320,13 @@
+@@ -268,6 +320,13 @@ static void *alloc_progmem(unsigned long
  	void *addr;
  
  #ifdef CONFIG_MIPS_VPE_LOADER_TOM
@@ -411,7 +411,7 @@
  	/*
  	 * This means you must tell Linux to use less memory than you
  	 * physically have, for example by passing a mem= boot argument.
-@@ -746,6 +805,12 @@
+@@ -746,6 +805,12 @@ static int vpe_run(struct vpe * v)
  	}
  
  	/* Write the address we want it to start running from in the TCPC register. */
@@ -424,7 +424,7 @@
  	write_tc_c0_tcrestart((unsigned long)v->__start);
  	write_tc_c0_tccontext((unsigned long)0);
  
-@@ -759,6 +824,20 @@
+@@ -759,6 +824,20 @@ static int vpe_run(struct vpe * v)
  
  	write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
  
@@ -445,7 +445,7 @@
  	/*
  	 * The sde-kit passes 'memsize' to __start in $a3, so set something
  	 * here...  Or set $a3 to zero and define DFLT_STACK_SIZE and
-@@ -833,6 +912,9 @@
+@@ -833,6 +912,9 @@ static int find_vpe_symbols(struct vpe *
  	if ( (v->__start == 0) || (v->shared_ptr == NULL))
  		return -1;
  
@@ -455,7 +455,7 @@
  	return 0;
  }
  
-@@ -994,6 +1076,15 @@
+@@ -994,6 +1076,15 @@ static int vpe_elfload(struct vpe * v)
  			   (unsigned long)v->load_addr + v->len);
  
  	if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
@@ -471,7 +471,7 @@
  		if (v->__start == 0) {
  			printk(KERN_WARNING "VPE loader: program does not contain "
  			       "a __start symbol\n");
-@@ -1064,6 +1155,9 @@
+@@ -1064,6 +1155,9 @@ static int vpe_open(struct inode *inode,
  	struct vpe_notifications *not;
  	struct vpe *v;
  	int ret;
@@ -481,7 +481,7 @@
  
  	if (minor != iminor(inode)) {
  		/* assume only 1 device at the moment. */
-@@ -1089,7 +1183,12 @@
+@@ -1089,7 +1183,12 @@ static int vpe_open(struct inode *inode,
  		release_progmem(v->load_addr);
  		cleanup_tc(get_tc(tclimit));
  	}
@@ -495,7 +495,7 @@
  	/* this of-course trashes what was there before... */
  	v->pbuffer = vmalloc(P_SIZE);
  	if (!v->pbuffer) {
-@@ -1097,11 +1196,14 @@
+@@ -1097,11 +1196,14 @@ static int vpe_open(struct inode *inode,
  		return -ENOMEM;
  	}
  	v->plen = P_SIZE;
@@ -510,7 +510,7 @@
  
  #ifdef CONFIG_MIPS_APSP_KSPD
  	/* get kspd to tell us when a syscall_exit happens */
-@@ -1349,6 +1451,133 @@
+@@ -1349,6 +1451,133 @@ static void kspd_sp_exit( int sp_id)
  	cleanup_tc(get_tc(sp_id));
  }
  #endif
@@ -644,7 +644,7 @@
  
  static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
  			  const char *buf, size_t len)
-@@ -1430,6 +1659,18 @@
+@@ -1430,6 +1659,18 @@ static int __init vpe_module_init(void)
  		printk("VPE loader: not a MIPS MT capable processor\n");
  		return -ENODEV;
  	}
@@ -663,7 +663,7 @@
  
  	if (vpelimit == 0) {
  		printk(KERN_WARNING "No VPEs reserved for AP/SP, not "
-@@ -1474,10 +1715,12 @@
+@@ -1474,10 +1715,12 @@ static int __init vpe_module_init(void)
  	mtflags = dmt();
  	vpflags = dvpe();
  
@@ -677,7 +677,7 @@
  
  	val = read_c0_mvpconf0();
  	hw_tcs = (val & MVPCONF0_PTC) + 1;
-@@ -1489,6 +1732,7 @@
+@@ -1489,6 +1732,7 @@ static int __init vpe_module_init(void)
  		 * reschedule send IPIs or similar we might hang.
  		 */
  		clear_c0_mvpcontrol(MVPCONTROL_VPC);
@@ -685,7 +685,7 @@
  		evpe(vpflags);
  		emt(mtflags);
  		local_irq_restore(flags);
-@@ -1514,6 +1758,7 @@
+@@ -1514,6 +1758,7 @@ static int __init vpe_module_init(void)
  			}
  
  			v->ntcs = hw_tcs - tclimit;
@@ -693,7 +693,7 @@
  
  			/* add the tc to the list of this vpe's tc's. */
  			list_add(&t->tc, &v->tc);
-@@ -1582,6 +1827,7 @@
+@@ -1582,6 +1827,7 @@ static int __init vpe_module_init(void)
  out_reenable:
  	/* release config state */
  	clear_c0_mvpcontrol(MVPCONTROL_VPC);

target/linux/lantiq/patches-2.6.39/260-ar9-cache-split.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -1653,6 +1653,28 @@
+@@ -1878,6 +1878,28 @@ config IFX_VPE_EXT
  	help
  	  IFX included extensions in APRP
  
@@ -31,7 +31,7 @@
  	depends on MIPS_MT && PROC_FS
 --- a/arch/mips/kernel/vpe.c
 +++ b/arch/mips/kernel/vpe.c
-@@ -129,6 +129,13 @@
+@@ -128,6 +128,13 @@ __setup("vpe1_wdog_timeout=", wdog_timeo
  EXPORT_SYMBOL(vpe1_wdog_timeout);
  
  #endif
@@ -45,7 +45,7 @@
  /* grab the likely amount of memory we will need. */
  #ifdef CONFIG_MIPS_VPE_LOADER_TOM
  #define P_SIZE (2 * 1024 * 1024)
-@@ -867,6 +874,65 @@
+@@ -866,6 +873,65 @@ static int vpe_run(struct vpe * v)
  	/* enable this VPE */
  	write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
  
@@ -113,7 +113,7 @@
  	write_vpe_c0_cause(0);
 --- a/arch/mips/mm/c-r4k.c
 +++ b/arch/mips/mm/c-r4k.c
-@@ -1348,6 +1348,106 @@
+@@ -1345,6 +1345,106 @@ static int __init setcoherentio(char *st
  __setup("coherentio", setcoherentio);
  #endif
  
@@ -220,7 +220,7 @@
  void __cpuinit r4k_cache_init(void)
  {
  	extern void build_clear_page(void);
-@@ -1367,6 +1467,78 @@
+@@ -1364,6 +1464,78 @@ void __cpuinit r4k_cache_init(void)
  		break;
  	}
  

target/linux/lantiq/patches-2.6.39/400-spi1.patch

@@ -10,7 +10,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
 
 --- a/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
 +++ b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
-@@ -50,4 +50,13 @@
+@@ -50,4 +50,13 @@ struct ltq_eth_data {
  	int mii_mode;
  };
  

target/linux/lantiq/patches-2.6.39/410-spi2.patch

@@ -10,7 +10,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
 
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -133,6 +133,14 @@
+@@ -193,6 +193,14 @@ config SPI_IMX
  	  This enables using the Freescale i.MX SPI controllers in master
  	  mode.
  
@@ -27,14 +27,14 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
  	depends on PARPORT && EXPERIMENTAL
 --- a/drivers/spi/Makefile
 +++ b/drivers/spi/Makefile
-@@ -20,6 +20,7 @@
+@@ -26,6 +26,7 @@ obj-$(CONFIG_SPI_EP93XX)		+= ep93xx_spi.
  obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
  obj-$(CONFIG_SPI_GPIO_OLD)		+= spi_gpio_old.o
  obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
 +obj-$(CONFIG_SPI_LANTIQ)		+= spi_lantiq.o
  obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
  obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
- obj-$(CONFIG_SPI_OMAP_UWIRE)		+= omap_uwire.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI)		+= pxa2xx_spi_pci.o
 --- /dev/null
 +++ b/drivers/spi/spi_lantiq.c
 @@ -0,0 +1,1063 @@

target/linux/lantiq/patches-2.6.39/420-spi3.patch

@@ -18,7 +18,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
  
  #include <asm/bootinfo.h>
  #include <asm/irq.h>
-@@ -119,3 +120,28 @@
+@@ -119,3 +120,28 @@ ltq_register_etop(struct ltq_eth_data *e
  		platform_device_register(&ltq_etop);
  	}
  }

target/linux/lantiq/patches-2.6.39/500-register_ebu.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/lantiq/xway/devices.c
 +++ b/arch/mips/lantiq/xway/devices.c
-@@ -121,6 +121,29 @@
+@@ -121,6 +121,29 @@ ltq_register_etop(struct ltq_eth_data *e
  	}
  }
  
@@ -32,7 +32,7 @@
  		.start  = LTQ_SSC_BASE_ADDR,
 --- a/arch/mips/lantiq/xway/devices.h
 +++ b/arch/mips/lantiq/xway/devices.h
-@@ -16,5 +16,6 @@
+@@ -16,5 +16,6 @@ extern void ltq_register_gpio(void);
  extern void ltq_register_gpio_stp(void);
  extern void ltq_register_ase_asc(void);
  extern void ltq_register_etop(struct ltq_eth_data *eth);

target/linux/lantiq/patches-2.6.39/510-register_madwifi.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/lantiq/xway/devices.c
 +++ b/arch/mips/lantiq/xway/devices.c
-@@ -144,6 +144,16 @@
+@@ -144,6 +144,16 @@ ltq_register_gpio_ebu(unsigned int value
  	platform_device_register(&ltq_ebu);
  }
  
@@ -19,7 +19,7 @@
  		.start  = LTQ_SSC_BASE_ADDR,
 --- a/arch/mips/lantiq/xway/devices.h
 +++ b/arch/mips/lantiq/xway/devices.h
-@@ -17,5 +17,6 @@
+@@ -17,5 +17,6 @@ extern void ltq_register_gpio_stp(void);
  extern void ltq_register_ase_asc(void);
  extern void ltq_register_etop(struct ltq_eth_data *eth);
  extern void ltq_register_gpio_ebu(unsigned int value);

target/linux/lantiq/patches-2.6.39/520-register_buttons.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/lantiq/xway/devices.c
 +++ b/arch/mips/lantiq/xway/devices.c
-@@ -154,6 +154,26 @@
+@@ -154,6 +154,26 @@ ltq_register_madwifi_eep(void)
  	lantiq_emulate_madwifi_eep = 1;
  }
  
@@ -37,7 +37,7 @@
  
  extern void ltq_register_gpio(void);
  extern void ltq_register_gpio_stp(void);
-@@ -18,5 +19,6 @@
+@@ -18,5 +19,6 @@ extern void ltq_register_ase_asc(void);
  extern void ltq_register_etop(struct ltq_eth_data *eth);
  extern void ltq_register_gpio_ebu(unsigned int value);
  extern void ltq_register_madwifi_eep(void);

target/linux/lantiq/patches-2.6.39/530-register_tapi.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/lantiq/devices.c
 +++ b/arch/mips/lantiq/devices.c
-@@ -120,3 +120,20 @@
+@@ -120,3 +120,20 @@ void __init ltq_register_pci(struct ltq_
  	pr_err("kernel is compiled without PCI support\n");
  }
  #endif
@@ -23,7 +23,7 @@
 +}
 --- a/arch/mips/lantiq/devices.h
 +++ b/arch/mips/lantiq/devices.h
-@@ -19,5 +19,6 @@
+@@ -19,5 +19,6 @@ extern void ltq_register_nor(struct phys
  extern void ltq_register_wdt(void);
  extern void ltq_register_asc(int port);
  extern void ltq_register_pci(struct ltq_pci_data *data);
@@ -32,7 +32,7 @@
  #endif
 --- a/arch/mips/lantiq/xway/mach-easy50712.c
 +++ b/arch/mips/lantiq/xway/mach-easy50712.c
-@@ -66,6 +66,7 @@
+@@ -66,6 +66,7 @@ static void __init easy50712_init(void)
  	ltq_register_nor(&easy50712_flash_data);
  	ltq_register_pci(&ltq_pci_data);
  	ltq_register_etop(&ltq_eth_data);

target/linux/lantiq/patches-2.6.39/550-dwc_otg.patch

@@ -1,6 +1,6 @@
 --- a/drivers/usb/Kconfig
 +++ b/drivers/usb/Kconfig
-@@ -114,6 +114,8 @@
+@@ -114,6 +114,8 @@ source "drivers/usb/wusbcore/Kconfig"
  
  source "drivers/usb/host/Kconfig"
  
@@ -11,7 +11,7 @@
  source "drivers/usb/class/Kconfig"
 --- a/drivers/usb/Makefile
 +++ b/drivers/usb/Makefile
-@@ -27,6 +27,8 @@
+@@ -27,6 +27,8 @@ obj-$(CONFIG_USB_C67X00_HCD)	+= c67x00/
  
  obj-$(CONFIG_USB_WUSB)		+= wusbcore/
  
@@ -15513,7 +15513,7 @@
 +#endif
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
-@@ -6,3 +6,4 @@
+@@ -6,3 +6,4 @@ obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o
  obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
  obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
  obj-$(CONFIG_LANTIQ_MACH_ARV45XX) += mach-arv45xx.o
@@ -15613,7 +15613,7 @@
 +#endif
 --- a/drivers/usb/core/hub.c
 +++ b/drivers/usb/core/hub.c
-@@ -2812,11 +2812,11 @@
+@@ -2812,11 +2812,11 @@ hub_port_init (struct usb_hub *hub, stru
  		udev->ttport = hdev->ttport;
  	} else if (udev->speed != USB_SPEED_HIGH
  			&& hdev->speed == USB_SPEED_HIGH) {

target/linux/lantiq/patches-2.6.39/570-gpio_fix.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/lantiq/xway/gpio_ebu.c
 +++ b/arch/mips/lantiq/xway/gpio_ebu.c
-@@ -63,7 +63,6 @@
+@@ -63,7 +63,6 @@ static struct gpio_chip ltq_ebu_chip = {
  	.set = ltq_ebu_set,
  	.base = 72,
  	.ngpio = 16,
@@ -10,7 +10,7 @@
  
 --- a/arch/mips/lantiq/xway/gpio_stp.c
 +++ b/arch/mips/lantiq/xway/gpio_stp.c
-@@ -72,7 +72,6 @@
+@@ -72,7 +72,6 @@ static struct gpio_chip ltq_stp_chip = {
  	.set = ltq_stp_set,
  	.base = 48,
  	.ngpio = 24,