copy data folder from history branch

Signed-off-by: Xiangfu Liu <xiangfu@sharism.cc>

data/qi_lb60/conf/config.full_system

@@ -0,0 +1,307 @@
+#
+# This file must be copied to .config in the OpenWrt root folder,
+# then run: yes "" | make oldconfig > /dev/null
+#
+
+CONFIG_TARGET_xburst=y
+CONFIG_TARGET_xburst_qi_lb60=y
+CONFIG_TARGET_ROOTFS_TARGZ=y
+# CONFIG_TARGET_ROOTFS_JFFS2 is not set
+CONFIG_TARGET_ROOTFS_UBIFS=y
+# CONFIG_BUILD_PATENTED is not set
+CONFIG_PACKAGE_uboot-xburst-qi_lb60=y
+
+CONFIG_IB=y
+CONFIG_SDK=y
+CONFIG_MAKE_TOOLCHAIN=y
+
+CONFIG_BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_JFS=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXRAID=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_CRAMFS=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_ROMFS=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_SYSV=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_OCFS2=y
+CONFIG_BUSYBOX_CONFIG_HTTPD=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_CGI=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_ASSUME_UNICODE=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_VI_8BIT=y
+#
+# system
+#
+CONFIG_PACKAGE_block-hotplug=y
+CONFIG_PACKAGE_block-mount=y
+CONFIG_PACKAGE_libpthread=y
+CONFIG_PACKAGE_librt=y
+CONFIG_PACKAGE_libstdcpp=y
+CONFIG_PACKAGE_ucitrigger=y
+CONFIG_PACKAGE_wireless-tools=y
+CONFIG_PACKAGE_kmod-fuse=y
+CONFIG_PACKAGE_kmod-tun=y
+CONFIG_PACKAGE_kmod-ks7010=y
+CONFIG_PACKAGE_nightsky=y
+CONFIG_PACKAGE_htop=y
+CONFIG_PACKAGE_fetchmail=y
+CONFIG_PACKAGE_mutt=y
+CONFIG_PACKAGE_gmenu2x=y
+CONFIG_PACKAGE_gtkhtml=y
+CONFIG_PACKAGE_gtkperf=y
+CONFIG_PACKAGE_tangogps=y
+CONFIG_PACKAGE_gnome-icon-theme=y
+CONFIG_PACKAGE_hicolor-icon-theme=y
+CONFIG_PACKAGE_dejavu-fonts-ttf=y
+CONFIG_PACKAGE_wqy-microhei=y
+CONFIG_PACKAGE_fontconfig=y
+#
+# gui
+#
+CONFIG_PACKAGE_gtk2=y
+CONFIG_PACKAGE_gtkmm=y
+CONFIG_PACKAGE_libxfce4util=y
+CONFIG_PACKAGE_qt4=y
+CONFIG_QT4_WS_QWS=y
+CONFIG_PACKAGE_qt4-dbus=y
+CONFIG_PACKAGE_qt4-drivers-gfx-directfb=y
+CONFIG_PACKAGE_qt4-drivers-gfx-linuxfb=y
+CONFIG_PACKAGE_qt4-drivers-kbd-linuxinput=y
+CONFIG_PACKAGE_qt4-drivers-mouse-pcmousedriver=y
+CONFIG_PACKAGE_qt4-drivers-mouse-tpmousedriver=y
+CONFIG_PACKAGE_qt4-drivers-mouse-tslibmousedriver=y
+CONFIG_PACKAGE_qt4-gui=y
+CONFIG_PACKAGE_qt4-mysql=y
+CONFIG_PACKAGE_qt4-network=y
+CONFIG_PACKAGE_qt4-sqlite=y
+CONFIG_PACKAGE_qt4-xml=y
+# 
+CONFIG_PACKAGE_atk=y
+CONFIG_PACKAGE_cairo=y
+CONFIG_PACKAGE_cairomm=y
+CONFIG_PACKAGE_libICE=y
+CONFIG_PACKAGE_libSM=y
+CONFIG_PACKAGE_libglade=y
+CONFIG_PACKAGE_libxfconf=y
+CONFIG_PACKAGE_orbit2=y
+CONFIG_PACKAGE_pango=y
+CONFIG_PACKAGE_pangomm=y
+CONFIG_PACKAGE_pixman=y
+CONFIG_PACKAGE_tslib=y
+CONFIG_PACKAGE_dgclock=y
+CONFIG_PACKAGE_lftp=y
+CONFIG_PACKAGE_centerim=y
+CONFIG_PACKAGE_openvpn=y
+CONFIG_PACKAGE_elinks=y
+CONFIG_PACKAGE_climm=y
+CONFIG_PACKAGE_curl=y
+CONFIG_PACKAGE_lynx=y
+CONFIG_PACKAGE_mcabber=y
+CONFIG_PACKAGE_rsync=y
+CONFIG_PACKAGE_surfraw=y
+CONFIG_PACKAGE_tcpdump=y
+CONFIG_PACKAGE_wpa-supplicant=y
+CONFIG_WPA_SUPPLICANT_INTERNAL=y
+CONFIG_PACKAGE_libblkid=y
+CONFIG_PACKAGE_libext2fs=y
+CONFIG_PACKAGE_libuuid=y
+CONFIG_PACKAGE_libgnutls=y
+CONFIG_PACKAGE_libgnutls-extra=y
+CONFIG_PACKAGE_libgnutls-openssl=y
+CONFIG_PACKAGE_libopenssl=y
+CONFIG_PACKAGE_libsqlite3=y
+CONFIG_PACKAGE_alsa-lib=y
+CONFIG_PACKAGE_directfb=y
+CONFIG_PACKAGE_glib1=y
+CONFIG_PACKAGE_glib2=y
+CONFIG_PACKAGE_glibmm=y
+CONFIG_PACKAGE_gpgme=y
+CONFIG_PACKAGE_libIDL2=y
+CONFIG_PACKAGE_libassuan=y
+CONFIG_PACKAGE_libcharset=y
+CONFIG_PACKAGE_libcurl=y
+CONFIG_PACKAGE_libdbus=y
+CONFIG_PACKAGE_libdbus-glib=y
+CONFIG_PACKAGE_libelf=y
+CONFIG_PACKAGE_libevent=y
+CONFIG_PACKAGE_libexif=y
+CONFIG_PACKAGE_libexpat=y
+CONFIG_PACKAGE_libffi=y
+CONFIG_PACKAGE_libfreetype=y
+CONFIG_PACKAGE_libgconf2=y
+CONFIG_PACKAGE_libgcrypt=y
+CONFIG_PACKAGE_libgmp=y
+CONFIG_PACKAGE_libgpg-error=y
+CONFIG_PACKAGE_libgsm=y
+CONFIG_PACKAGE_libiconv=y
+CONFIG_PACKAGE_libintl=y
+CONFIG_PACKAGE_libjpeg=y
+CONFIG_PACKAGE_libltdl=y
+CONFIG_PACKAGE_liblua=y
+CONFIG_PACKAGE_liblzo=y
+CONFIG_PACKAGE_libmagic=y
+CONFIG_PACKAGE_libmikmod=y
+CONFIG_PACKAGE_libmpcdec=y
+CONFIG_PACKAGE_libmysqlclient=y
+CONFIG_PACKAGE_libncurses=y
+CONFIG_PACKAGE_libogg=y
+CONFIG_PACKAGE_libpcap=y
+CONFIG_PACKAGE_libpcre=y
+CONFIG_PACKAGE_libpng=y
+CONFIG_PACKAGE_libpopt=y
+CONFIG_PACKAGE_libreadline=y
+CONFIG_PACKAGE_libruby=y
+CONFIG_PACKAGE_libsdl=y
+CONFIG_PACKAGE_libsdl-gfx=y
+CONFIG_PACKAGE_libsdl-image=y
+CONFIG_PACKAGE_libsdl-mixer=y
+CONFIG_PACKAGE_libsdl-ttf=y
+CONFIG_PACKAGE_libsigcxx=y
+CONFIG_PACKAGE_libtiff=y
+CONFIG_PACKAGE_libuci-lua=y
+CONFIG_PACKAGE_libvorbis=y
+CONFIG_PACKAGE_libvorbisidec=y
+CONFIG_PACKAGE_libxml2=y
+CONFIG_PACKAGE_tntnet=y
+CONFIG_PACKAGE_uclibcxx=y
+CONFIG_PACKAGE_zlib=y
+# 
+# games
+#
+CONFIG_PACKAGE_backgammon=y
+CONFIG_PACKAGE_primes=y
+CONFIG_PACKAGE_tetris=y
+CONFIG_PACKAGE_worm=y
+CONFIG_PACKAGE_freedroid=y
+CONFIG_PACKAGE_frotz=y
+CONFIG_PACKAGE_gnuchess=y
+CONFIG_PACKAGE_libphysfs=y
+CONFIG_PACKAGE_nlove=y
+#
+CONFIG_PACKAGE_GraphicsMagick=y
+CONFIG_PACKAGE_GraphicsMagick-jpeg=y
+CONFIG_PACKAGE_gmu=y
+CONFIG_PACKAGE_joe=y
+CONFIG_PACKAGE_nano=y
+CONFIG_PACKAGE_ne=y
+CONFIG_PACKAGE_joe-full=y
+CONFIG_PACKAGE_vim-full=y
+CONFIG_PACKAGE_badblocks=y
+CONFIG_PACKAGE_blkid=y
+CONFIG_PACKAGE_disktype=y
+CONFIG_PACKAGE_e2fsprogs=y
+CONFIG_PACKAGE_mkdosfs=y
+CONFIG_PACKAGE_mount.ntfs-3g=y
+CONFIG_PACKAGE_ntfs-3g=y
+CONFIG_PACKAGE_uuidgen=y
+# 
+CONFIG_PACKAGE_fbsize=y
+CONFIG_PACKAGE_fbterm=y
+CONFIG_PACKAGE_jfbterm=y
+CONFIG_PACKAGE_minicom=y
+CONFIG_PACKAGE_unzip=y
+CONFIG_PACKAGE_zip=y
+CONFIG_PACKAGE_cfdisk=y
+CONFIG_PACKAGE_fdisk=y
+CONFIG_PACKAGE_mc=y
+CONFIG_PACKAGE_NanoMap=y
+CONFIG_PACKAGE_alsa-utils=y
+CONFIG_PACKAGE_at=y
+CONFIG_PACKAGE_bash=y
+CONFIG_PACKAGE_bc=y
+CONFIG_PACKAGE_bzip2=y
+CONFIG_PACKAGE_calcurse=y
+CONFIG_PACKAGE_catdoc=y
+CONFIG_PACKAGE_cxxtools=y
+CONFIG_PACKAGE_dbus=y
+CONFIG_PACKAGE_dbus-launch-x=y
+CONFIG_PACKAGE_dialog=y
+CONFIG_PACKAGE_fbgrab=y
+CONFIG_PACKAGE_file=y
+CONFIG_PACKAGE_fn-handle=y
+CONFIG_PACKAGE_gawk=y
+CONFIG_PACKAGE_gcal=y
+CONFIG_PACKAGE_gdbserver=y
+CONFIG_PACKAGE_gnupg=y
+CONFIG_PACKAGE_gpioctl=y
+CONFIG_PACKAGE_gsm-utils=y
+CONFIG_PACKAGE_hnb=y
+CONFIG_PACKAGE_i2c-tools=y
+CONFIG_PACKAGE_iconv=y
+CONFIG_PACKAGE_imgv=y
+CONFIG_PACKAGE_jpeg-tools=y
+CONFIG_PACKAGE_kbd=y
+CONFIG_PACKAGE_kbd-console-fonts=y
+CONFIG_PACKAGE_kexec-tools=y
+CONFIG_PACKAGE_picoc=y
+CONFIG_PACKAGE_jbig2dec=y
+CONFIG_PACKAGE_openjpeg=y
+CONFIG_PACKAGE_unifont=y
+#
+CONFIG_KEXEC_TOOLS_TARGET_NAME="mipsel"
+CONFIG_PACKAGE_lsof=y
+CONFIG_PACKAGE_macchanger=y
+CONFIG_PACKAGE_mandoc=y
+CONFIG_PACKAGE_mathomatic=y
+CONFIG_PACKAGE_mtd-utils=y
+CONFIG_PACKAGE_o3read=y
+CONFIG_PACKAGE_odt2txt=y
+CONFIG_PACKAGE_poke=y
+CONFIG_PACKAGE_powertop=y
+CONFIG_PACKAGE_pwgen=y
+CONFIG_PACKAGE_quickcalc=y
+CONFIG_PACKAGE_remind=y
+CONFIG_PACKAGE_sc=y
+CONFIG_PACKAGE_screen=y
+CONFIG_PACKAGE_sdcv=y
+CONFIG_PACKAGE_sed=y
+CONFIG_PACKAGE_setfont2=y
+CONFIG_PACKAGE_snownews=y
+CONFIG_PACKAGE_stardict=y
+CONFIG_PACKAGE_stardict-dic-en-en=y
+CONFIG_PACKAGE_strace=y
+CONFIG_PACKAGE_tmux=y
+CONFIG_PACKAGE_uboot-envtools=y
+CONFIG_PACKAGE_units=y
+CONFIG_PACKAGE_xz=y
+CONFIG_PACKAGE_diffutils=y
+CONFIG_PACKAGE_make=y
+CONFIG_PACKAGE_patch=y
+CONFIG_PACKAGE_mpc=y
+CONFIG_PACKAGE_sox=y
+# 
+CONFIG_PACKAGE_jamvm=y
+CONFIG_PACKAGE_lua=y
+CONFIG_PACKAGE_php5=y
+CONFIG_PACKAGE_php5-cli=y
+CONFIG_PACKAGE_perl=y
+CONFIG_PACKAGE_pygame=y
+CONFIG_PACKAGE_python=y
+CONFIG_PACKAGE_python-mini=y
+CONFIG_PACKAGE_ruby=y
+CONFIG_PACKAGE_gforth=y
+CONFIG_PACKAGE_guile=y
+CONFIG_PACKAGE_ben-cyrillic=m
+CONFIG_PACKAGE_cmdpad=y
+CONFIG_PACKAGE_ghostscript=y
+CONFIG_PACKAGE_hwclock=y
+CONFIG_PACKAGE_io=y
+CONFIG_PACKAGE_mupdf-tools=y
+CONFIG_PACKAGE_binutils=y
+CONFIG_PACKAGE_gcc-mips=y
+CONFIG_PACKAGE_libbfd=y
+CONFIG_PACKAGE_objdump=y
+CONFIG_PACKAGE_erlang=y
+CONFIG_PACKAGE_jbofihe=y
+CONFIG_PACKAGE_lojban-wordlists=y
+CONFIG_PACKAGE_makfa=y
+CONFIG_PACKAGE_fbgs=y
+CONFIG_PACKAGE_fbi=y
+CONFIG_PACKAGE_gnuplot=y
+CONFIG_PACKAGE_nupdf=y
+CONFIG_PACKAGE_byobu=y

data/qi_lb60/conf/config.minimal

@@ -0,0 +1,12 @@
+#
+# This file must be copied to .config in the OpenWrt root folder,
+# then run: yes "" | make oldconfig > /dev/null
+#
+
+CONFIG_TARGET_xburst=y
+CONFIG_TARGET_xburst_qi_lb60=y
+# CONFIG_TARGET_ROOTFS_TARGZ is not set
+# CONFIG_TARGET_ROOTFS_JFFS2 is not set
+CONFIG_TARGET_ROOTFS_UBIFS=y
+# CONFIG_BUILD_PATENTED is not set
+CONFIG_PACKAGE_uboot-xburst-qi_lb60=y

data/qi_lb60/conf/config.xbboot

@@ -0,0 +1,19 @@
+#
+# This file must be copied to .config in the OpenWrt root folder,
+# then run: yes "" | make oldconfig > /dev/null
+#
+
+# TBD:
+# this config file does not work on tracking_trunk branch:
+#   some patch not goto the trunk branch.
+# add some packages, kernel give different error message!
+
+CONFIG_TARGET_xburst=y
+CONFIG_TARGET_xburst_qi_lb60=y
+# CONFIG_TARGET_ROOTFS_TARGZ is not set
+# CONFIG_TARGET_ROOTFS_JFFS2 is not set
+CONFIG_TARGET_ROOTFS_INITRAMFS=y
+CONFIG_TARGET_INITRAMFS_COMPRESSION_LZMA=y
+# CONFIG_BUILD_PATENTED is not set
+CONFIG_PACKAGE_mtd-utils=y
+

data/qi_lb60/conf/config.xbboot.README

@@ -0,0 +1,13 @@
+the "config.xbboot" is for build image that used by "xbboot"
+this "config.xbboot" will enable CONFIG_TARGET_ROOTFS_INITRAMFS, and
+only select basic pakcages.
+
+1. at the root of openwrt folder:
+	$ cp data/qi_lb60/conf/config.xbboot .config
+	$ make
+
+2. upload the image to Ben NanoNote
+	boot Ben NanoNote to USBBOOT mode.
+	$ sudo xbboot -u 0x80600000 bin/xburst/openwrt-xburst-qi_lb60-zImage.bin
+
+then the NanoNote will boot. setup a password for ssh or use telnet to login NanoNote.

data/qi_lb60/files/etc/asound.state

@@ -0,0 +1,69 @@
+state.LB60 {
+	control.1 {
+		comment.access 'read write'
+		comment.type INTEGER
+		comment.count 1
+		comment.range '0 - 3'
+		iface MIXER
+		name 'Master Playback Volume'
+		value 2
+	}
+	control.2 {
+		comment.access 'read write'
+		comment.type INTEGER
+		comment.count 1
+		comment.range '0 - 31'
+		iface MIXER
+		name 'Capture Volume'
+		value 23
+	}
+	control.3 {
+		comment.access 'read write'
+		comment.type BOOLEAN
+		comment.count 1
+		iface MIXER
+		name 'Master Playback Switch'
+		value true
+	}
+	control.4 {
+		comment.access 'read write'
+		comment.type INTEGER
+		comment.count 1
+		comment.range '0 - 3'
+		iface MIXER
+		name 'Mic Capture Volume'
+		value 0
+	}
+	control.5 {
+		comment.access 'read write'
+		comment.type BOOLEAN
+		comment.count 1
+		iface MIXER
+		name 'Line Capture Switch'
+		value false
+	}
+	control.6 {
+		comment.access 'read write'
+		comment.type BOOLEAN
+		comment.count 1
+		iface MIXER
+		name 'Mic Capture Switch'
+		value false
+	}
+	control.7 {
+		comment.access 'read write'
+		comment.type BOOLEAN
+		comment.count 1
+		iface MIXER
+		name 'Output Mixer Bypass Switch'
+		value false
+	}
+	control.8 {
+		comment.access 'read write'
+		comment.type BOOLEAN
+		comment.count 1
+		iface MIXER
+		name 'Output Mixer DAC Switch'
+		value true
+	}
+}

data/qi_lb60/files/etc/banner

@@ -0,0 +1,9 @@
+___|___ _______
+  /|\  |    |  |.---.-.-----.-----. sharism.cc - the
+ /_|_\ |       ||  _  |     |  _  | copyleft company
+   |   |__|____||___._|__|__|_____|
+      Qi Hardware        _______         __
+   freedom redefined    |    |  |.-----.|  |_.-----.
+                        |       ||  _  ||   _|  -__|
+ This is the beginning. |__|____||_____||____|_____|
+------------------------------ version 2010-09-06 --

data/qi_lb60/files/etc/directfbrc

@@ -0,0 +1 @@
+no-deinit-check

data/qi_lb60/files/etc/fw_env.config

@@ -0,0 +1,11 @@
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+# Notice, that the "Number of sectors" is ignored on NOR.
+
+# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
+/dev/mtd0		0x100000	0x1000		0x80000
+/dev/mtd0		0x180000	0x1000		0x80000
+
+# NAND example
+#/dev/mtd0		0x4000		0x4000		0x20000			2

data/qi_lb60/files/etc/init.d/start

@@ -0,0 +1,7 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+START=99
+boot() {
+	SDL_NOMOUSE=1 start-stop-daemon -S -b -x /usr/bin/gmenu2x
+}

data/qi_lb60/files/etc/inputrc

@@ -0,0 +1,5 @@
+# 8Bits supports.
+set meta-flag on
+set convert-meta off
+set input-meta on
+set output-meta on

data/qi_lb60/files/etc/profile

@@ -0,0 +1,18 @@
+#!/bin/sh
+[ -f /etc/banner ] && cat /etc/banner
+
+export PATH=/bin:/sbin:/usr/bin:/usr/sbin
+export HOME=$(grep -e "^${USER:-root}:" /etc/passwd | cut -d ":" -f 6)
+export HOME=${HOME:-/root}
+export PS1='\u@\h:\w\$ '
+
+export SDL_NOMOUSE=1
+export SDL_VIDEODRIVER=fbcon
+
+[ -x /bin/more ] || alias more=less
+[ -x /usr/bin/vim ] && alias vi=vim || alias vim=vi
+
+[ -z "$KSH_VERSION" -o \! -s /etc/mkshrc ] || . /etc/mkshrc
+
+[ -x /sbin/arp ] || arp() { cat /proc/net/arp; }
+[ -z /bin/ldd ] || ldd() { LD_TRACE_LOADED_OBJECTS=1 $*; }

data/qi_lb60/files/root/Music/README

@@ -0,0 +1,3 @@
+the Music file [Creative_Commons_-_Remix_Culture.ogg]
+ can found at: http://mirrors.creativecommons.org/reticulum_rex/
+ download at : http://mirrors.creativecommons.org/reticulum_rex/Creative_Commons_-_Remix_Culture.ogg

data/qi_lb60/files/usr/share/gmenu2x/sections/applications/dgclock

@@ -0,0 +1,4 @@
+title=DGClock
+icon=skin:icons/dgclock.png
+exec=/usr/bin/dgclock
+wrapper=true

data/qi_lb60/files/usr/share/gmenu2x/sections/applications/gmu

@@ -0,0 +1,4 @@
+title=GMU
+icon=skin:icons/gmu.png
+exec=/usr/bin/gmu
+wrapper=true

data/qi_lb60/files/usr/share/gmenu2x/sections/applications/nanomap

@@ -0,0 +1,5 @@
+title=NanoMap
+icon=skin:icons/nanomap.png
+exec=/usr/bin/NanoMap
+params=-qws
+wrapper=true

data/qi_lb60/files/usr/share/gmenu2x/sections/applications/stardict

@@ -0,0 +1,4 @@
+title=StarDict
+icon=skin:icons/stardict.png
+exec=/usr/bin/stardict
+wrapper=true

data/qi_lb60/scripts/build

@@ -0,0 +1,132 @@
+#!/bin/bash
+
+BASE_DIR="xburst"
+
+LOG="${BASE_DIR}/LOG"
+
+BUILD_LOG="${BASE_DIR}/BUILD_LOG"
+
+DATE=$(date "+%Y-%m-%d")
+TIME=$(date "+%H-%M-%S")
+DATE_TIME="${DATE}_${TIME}"
+
+FEEDS_CONF="feeds.conf.default"
+test -f "feeds.conf" && FEEDS_CONF="feeds.conf"
+
+if [ "${0}" != "./scripts/build" ]; then
+	echo "Please call me that way: ./scripts/build"
+	echo " - out of the main directory"
+	exit 1
+fi
+
+if [ ! -f ".config" ]; then
+	echo "OpenWrt didn't get configured yet."
+	exit 1
+fi
+
+if [ -f "config" ]; then
+	echo "file <config> exists."
+	echo "That means normally, a previous build failed"
+	echo "Please examine the situation"
+	exit 1
+fi
+
+echo "This script will move previous builds to bak/!"
+echo "This script will compile base on last commit"
+echo "  your  modifications will backup by git stash"
+echo "  those modifications will apply again after compile"
+echo "This script comes without any kind of warranty!"
+echo " "
+echo "Are you brave, dude? [NO/yes]"
+
+read brave
+
+echo " "
+
+if [ "${brave}" != "yes" ]; then
+	exit 1
+fi
+
+echo "cleaning up toolchain..."
+mkdir bak 2>/dev/null
+BAK="build_dir staging_dir tmp bin .config.old feeds xburst config"
+for bak in $BAK; do
+	mv "${bak}" "bak/${bak}_${DATE_TIME}" 2> /dev/null && echo "backed up <${bak}>"
+done
+rm -rf package/feeds/*
+
+mv .config config
+mkdir xburst
+
+echo "updating git repo..."
+git stash
+git checkout tracking_backfire
+git pull > /dev/null
+if [ "$?" != "0" ]; then
+	echo "ERROR: updating openwrt-xburst failed"
+	exit 1
+fi
+
+echo "updating feeds..."
+scripts/feeds update -a > /dev/null 2>&1
+if [ "$?" != "0" ]; then
+	echo "ERROR: updating feeds failed"
+	exit 1
+fi
+echo "installing feeds..."
+scripts/feeds install -a > /dev/null 2>&1
+if [ "$?" != "0" ]; then
+	echo "ERROR: installing feeds failed"
+	exit 1
+fi
+
+echo "getting version numbers of used repositories..."
+feeds="$(cat "${FEEDS_CONF}" | grep -v -E "^#")"
+VERSIONS_FILE="xburst/VERSIONS"
+echo "# base :: 'openwrt' [scm-protocol] [revision] [source] [branch]" > ${VERSIONS_FILE}
+tmp=($(git show-ref | head -n 1))
+rev=${tmp[0]}
+echo "openwrt git ${rev} git://projects.qi-hardware.com/openwrt-xburst.git tracking_backfire" >> ${VERSIONS_FILE}
+echo "# feeds :: [feedname] [scm-protocol] [revision]" >> ${VERSIONS_FILE}
+IFS=$'\n'
+for feed in $feeds; do
+        IFS=' ' arr=(${feed:4})
+        proto=${arr[0]}
+        dir=${arr[1]}
+        url=${arr[2]}
+        if [ "$proto" = "svn" ]; then
+                cd feeds/${arr[1]} && tmp=($(svn info | grep -E "^Revision")) && cd ../../
+                rev=${tmp[1]}
+        fi
+        if [ "$proto" = "git" ]; then
+                cd feeds/${arr[1]} && tmp=($(git show-ref | head -n 1)) && cd ../../
+                rev=${tmp[0]}
+        fi
+        echo "${dir} ${proto} ${rev}" >> ${VERSIONS_FILE}
+done
+
+mkdir -p files/etc
+echo ${DATE} > files/etc/VERSION
+
+mv config .config
+
+yes "" | make oldconfig
+
+echo "starting compiling - this may take several hours..."
+
+time make V=99 > xburst/BUILD_LOG 2>&1
+
+if [ "$?" != "0" ]; then
+	echo "ERROR: Build failed!"
+	echo "Please refer to the log file"
+	exit 1
+fi
+
+git stash pop
+
+cp .config xburst/config
+cp bin/xburst/* xburst/ 2>/dev/null
+mkdir xburst/files
+cp -a files/* xburst/files/
+
+echo "DONE :)"

data/qi_lb60/scripts/reflash_ben.sh

@@ -0,0 +1,174 @@
+#!/bin/bash
+VERSION="latest"
+
+# use 'http' to download and flash images, use 'file' to flash images present in the <WORKING_DIR>
+PROTOCOL="http"
+
+# working directory
+#WORKING_DIR="/tmp/NanoNote/${VERSION}"
+WORKING_DIR="${HOME}/.qi/nanonote/ben/${VERSION}"
+
+# where the verbose output goes to
+LOG_FILE="${WORKING_DIR}/log.txt"
+
+# URL to images ($URL/$VERSION/$[images])
+#BASE_URL_HTTP="http://downloads.qi-hardware.com/software/images/Ben_NanoNote_2GB_NAND"
+BASE_URL_HTTP="http://downloads.qi-hardware.com/software/images/NanoNote/Ben"
+
+# names of images
+LOADER="openwrt-xburst-qi_lb60-u-boot.bin"
+#KERNEL="openwrt-xburst-uImage.bin"
+KERNEL="openwrt-xburst-qi_lb60-uImage.bin"
+#ROOTFS="openwrt-xburst-rootfs.ubi"
+ROOTFS="openwrt-xburst-qi_lb60-root.ubi"
+
+###############
+
+# version of script
+__VERSION__="2.1.1"
+
+
+# options for reflash bootloader, kernel or rootfs
+B="TRUE"
+K="TRUE"
+R="TRUE"
+
+while getopts d:l:bkr OPTIONS
+do
+    case $OPTIONS in
+    d)     
+        VERSION=$OPTARG # override version by first argument if passed
+        B="TRUE"
+        K="TRUE"
+        R="TRUE"
+        ;;
+    l)
+        WORKING_DIR=$OPTARG
+        VERSION=
+        PROTOCOL="file"
+        B="TRUE"
+        K="TRUE"
+        R="TRUE"
+        ;;
+    *)
+        echo "\
+Usage: $0 [-d <version>] [-l <path to local images>] [-b] [-k] [-r] [-h] [-v]
+
+without any arguments, I will download and flash the latest official images
+(includes bootloader, kernel and rootfs)
+
+     -d <>  I will download and flash a specific version of official images
+            (includes bootloader, kernel and rootfs)
+
+     -l <>  I will flash images present in <arg>
+            (includes bootloader, kernel and rootfs -
+             missing files will be skipped)
+
+     -h     you already found out
+
+ 
+reflash script for qi-hardware Ben NanoNote
+
+written by: Mirko Vogt (mirko.vogt@sharism.cc)
+            Xiangfu Liu (xiangfu@sharism.cc)
+
+version: ${__VERSION__}
+
+Please report bugs to developer@lists.qi-hardware.com"
+        exit 1
+        ;;
+    esac
+done
+
+# if no arguments were given
+if [ "$#" == "0" ]; then
+    B="TRUE"
+    K="TRUE"
+    R="TRUE"
+fi
+
+# create working directory
+mkdir -p ${WORKING_DIR}
+date > "${LOG_FILE}" # purge logfile if exists
+
+function log() {
+    echo -e "$1"
+    echo -e "$1" >> "${LOG_FILE}"
+}
+
+function abort() {
+    log "==="
+    log "fatal error occured - ABORTED"
+    log "==="
+    log "$1"
+    log "==="
+    log "Before reporting this as a bug"
+    log "please ensure you're using the latest available version of"
+    log "  this reflash script"
+    log "  the xburst-tools"
+    exit 1
+}
+
+[ "$(whoami)" == "root" ] || abort "this script must be run as root"
+
+log "working dir:      ${WORKING_DIR}"
+log "chosen method:    ${PROTOCOL}"
+test ${VERSION} && log "chosen version:   ${VERSION}"
+log "==="
+
+if [ "$PROTOCOL" == "http" ]; then
+
+    MD5SUMS_SERVER=$(wget -O - ${BASE_URL_HTTP}/${VERSION}/md5sums 2> /dev/null | grep -E "(${LOADER}|${KERNEL}|${ROOTFS})" | sort)
+    [ "${MD5SUMS_SERVER}" ] || abort "can't fetch files from server"
+    
+    MD5SUMS_LOCAL=$( (cd "${WORKING_DIR}" ; md5sum --binary "${LOADER}" "${KERNEL}" "${ROOTFS}" 2> /dev/null) | sort )
+
+    if [ "${MD5SUMS_SERVER}" == "${MD5SUMS_LOCAL}" ]; then
+        log "present files are identical to the ones on the server - do not download them again"
+    else
+        rm -f "${WORKING_DIR}/${LOADER}" "${WORKING_DIR}/${KERNEL}" "${WORKING_DIR}/${ROOTFS}"
+	if [ "$B" == "TRUE" ]; then
+		log "fetching bootloader..."
+		wget \
+		    -a "${LOG_FILE}" \
+		    -P "${WORKING_DIR}" \
+		    "${BASE_URL_HTTP}/${VERSION}/${LOADER}"
+	fi
+	if [ "$K" == "TRUE" ]; then
+		log "fetching kernel..."
+		wget \
+		    -a "${LOG_FILE}" \
+		    -P "${WORKING_DIR}" \
+		    "${BASE_URL_HTTP}/${VERSION}/${KERNEL}"
+	fi
+	if [ "$R" == "TRUE" ]; then
+		log "fetching rootfs..."
+		wget \
+		    -a "${LOG_FILE}" \
+		    -P "${WORKING_DIR}" \
+		    "${BASE_URL_HTTP}/${VERSION}/${ROOTFS}"
+	fi
+    fi
+fi
+
+log "booting device..."
+usbboot -c "boot" >> "${LOG_FILE}" || abort "can't boot device - xburst-tools setup correctly? device in boot-mode? device connected?"
+
+if [ "$B" == "TRUE" ]; then
+	log "flashing bootloader..."
+	tmp=$(usbboot -c "nprog 0 ${WORKING_DIR}/${LOADER} 0 0 -n" 3>> "${LOG_FILE}" 2>&1 >&3)
+	test "${tmp}" && abort "error while flashing bootloader:\n${tmp}"
+fi
+if [ "$K" == "TRUE" ]; then
+	log "flashing kernel..."
+	tmp=$(usbboot -c "nprog 1024 ${WORKING_DIR}/${KERNEL} 0 0 -n" 3>> "${LOG_FILE}" 2>&1 >&3)
+	test "${tmp}" && abort "error while flashing kernel:\n${tmp}"
+fi
+if [ "$R" == "TRUE" ]; then
+	log "erase nand rootfs partition..."
+	usbboot -c "boot;nerase 16 512 0 0" >> "${LOG_FILE}" 2>&1
+	log "flashing rootfs..."
+	tmp=$(usbboot -c "nprog 2048 ${WORKING_DIR}/${ROOTFS} 0 0 -n" 3>> "${LOG_FILE}" 2>&1 >&3)
+	test "${tmp}" && abort "error while flashing rootfs:\n${tmp}"
+fi
+log "done"