do not use linux-mips-cvs anymore. suggested earlier by Kaloz.

I created a patch between linux-2.4.29 and linux-mips-cvs from
today. kernel still work on my development router.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@242 3c298f89-4303-0410-b956-a3cf2f4a3e73

package/linux/linux.config

@@ -1,5 +1,5 @@
 #
-# Automatically generated by make menuconfig: don't edit
+# Automatically generated make config: don't edit
 #
 CONFIG_MIPS=y
 CONFIG_MIPS32=y
@@ -22,16 +22,19 @@ CONFIG_MODULES=y
 #
 # CONFIG_ACER_PICA_61 is not set
 # CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_FICMMP is not set
 # CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_DB1000 is not set
 # CONFIG_MIPS_DB1100 is not set
 # CONFIG_MIPS_DB1500 is not set
 # CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_PB1000 is not set
 # CONFIG_MIPS_PB1100 is not set
 # CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
 # CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_COGENT_CSB250 is not set
@@ -164,6 +167,10 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_CONCAT is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
@@ -229,6 +236,10 @@ CONFIG_MTD_SFLASH=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_MTDRAM is not set
 # CONFIG_MTD_BLKMTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
 # CONFIG_MTD_DOC1000 is not set
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
@@ -397,6 +408,10 @@ CONFIG_IP6_NF_TARGET_MARK=m
 # CONFIG_IP_SCTP is not set
 # CONFIG_ATM is not set
 CONFIG_VLAN_8021Q=y
+
+#
+#  
+#
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_DECNET is not set
@@ -629,7 +644,6 @@ CONFIG_SERIAL=y
 CONFIG_SERIAL_CONSOLE=y
 # CONFIG_SERIAL_EXTENDED is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_UNIX98_PTY_COUNT=128
 
@@ -648,6 +662,14 @@ CONFIG_UNIX98_PTY_COUNT=128
 # Joysticks
 #
 # CONFIG_INPUT_GAMEPORT is not set
+
+#
+# Input core support is needed for gameports
+#
+
+#
+# Input core support is needed for joysticks
+#
 # CONFIG_QIC02_TAPE is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_IPMI_PANIC_EVENT is not set

package/linux/linux.mk

@@ -1,22 +1,14 @@
 #############################################################
 #
-# Linux kernel targets
+# Linux kernel target for the OpenWRT project
 #
-# Note:  If you have any patches to apply, create the directory
-# sources/kernel-patches and put your patches in there and number
-# them in the order you wish to apply them...  i.e.
-#
-#   sources/kernel-patches/001-my-special-stuff.bz2
-#   sources/kernel-patches/003-gcc-Os.bz2
-#   sources/kernel-patches/004_no-warnings.bz2
-#   sources/kernel-patches/030-lowlatency-mini.bz2
-#   sources/kernel-patches/031-lowlatency-fixes-5.bz2
-#   sources/kernel-patches/099-shutup.bz2
-#   etc...
-#
-# these patches will all be applied by the patch-kernel.sh
-# script (which will also abort the build if it finds rejects)
-#  -Erik
+# patches are sorted by numbers
+# 000	patch between linux-2.4.29 and linux-mips-cvs
+# 0xx	linksys patches
+# 1xx	OpenWRT patches (diag,compressed,..)
+# 2xx	fixes for 2.4.29 integration (wl driver)
+# 3xx	kernel feature patches (squashfs,jffs2 compression,..)
+# 4xx	patches needed to integrate feature patches
 #
 #############################################################
 ifneq ($(filter $(TARGETS),linux),)
@@ -29,10 +21,9 @@ LINUX_KARCH:=$(shell echo $(ARCH) | sed -e 's/i[3-9]86/i386/' \
 	)
 
 LINUX_VERSION=2.4.29
-LINUX_CVS_DATE="2005-01-30"
-LINUX_CVS_BRANCH=linux_2_4
-LINUX_DIR=$(BUILD_DIR)/linux
-LINUX_SITE=ftp.linux-mips.org
+LINUX_DIR=$(BUILD_DIR)/linux-$(LINUX_VERSION)
+LINUX_SITE=http://www.kernel.org/pub/linux/kernel/v2.4
+LINUX_SOURCE=linux-$(LINUX_VERSION).tar.bz2
 LINUX_KCONFIG=package/linux/linux.config
 LINUX_KERNEL=$(BUILD_DIR)/buildroot-kernel
 LINUX_BINLOC=arch/$(LINUX_KARCH)/brcm-boards/bcm947xx/compressed/vmlinuz
@@ -45,20 +36,18 @@ LINKSYS_KERNEL_TGZ=linksys-kernel.tar.gz
 
 TARGET_MODULES_DIR=$(TARGET_DIR)/lib/modules/$(LINUX_VERSION)
 
-$(DL_DIR)/linux.tar.bz2:
+$(DL_DIR)/$(LINUX_SOURCE):
 	-mkdir -p $(DL_DIR)
-	(cd $(DL_DIR); cvs -d :pserver:cvs:cvs@$(LINUX_SITE):/home/cvs login)
-	(cd $(DL_DIR); cvs -z3 -d :pserver:cvs:cvs@$(LINUX_SITE):/home/cvs co -D $(LINUX_CVS_DATE) -r$(LINUX_CVS_BRANCH) linux)
-	(cd $(DL_DIR); tar jcvf linux.tar.bz2 linux && rm -rf linux)
+	$(WGET) -P $(DL_DIR) $(LINUX_SITE)/$(LINUX_SOURCE)
 
 $(DL_DIR)/$(LINKSYS_KERNEL_TGZ):
 	$(WGET) -P $(DL_DIR) $(LINKSYS_TGZ_SITE)/$(LINKSYS_KERNEL_TGZ)
 
-$(LINUX_DIR)/.unpacked: $(DL_DIR)/linux.tar.bz2 $(DL_DIR)/$(LINKSYS_KERNEL_TGZ)
+$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_SOURCE) $(DL_DIR)/$(LINKSYS_KERNEL_TGZ)
 	-mkdir -p $(BUILD_DIR)
-	(cd $(BUILD_DIR); tar jxvf $(DL_DIR)/linux.tar.bz2)
+	(cd $(BUILD_DIR); tar jxvf $(DL_DIR)/$(LINUX_SOURCE))
 	-mkdir -p $(TOOL_BUILD_DIR)
-	-(cd $(TOOL_BUILD_DIR); ln -sf $(BUILD_DIR)/linux linux)
+	-(cd $(TOOL_BUILD_DIR); ln -sf $(LINUX_DIR) linux)
 	toolchain/patch-kernel.sh $(LINUX_DIR) package/linux/kernel-patches
 	-cp $(LINUX_KCONFIG) $(LINUX_DIR)/.config
 	# extract linksys binary kernel stuff and include/shared files