diff --git a/target/linux/omap24xx/patches-2.6.37/300-nokia-board.patch b/target/linux/omap24xx/patches-2.6.37/300-nokia-board.patch index e61212be4..f44716c17 100644 --- a/target/linux/omap24xx/patches-2.6.37/300-nokia-board.patch +++ b/target/linux/omap24xx/patches-2.6.37/300-nokia-board.patch @@ -12,7 +12,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap1/board-nokia770.c =================================================================== --- linux-2.6.37-rc1.orig/arch/arm/mach-omap1/board-nokia770.c 2010-11-01 12:54:12.000000000 +0100 -+++ linux-2.6.37-rc1/arch/arm/mach-omap1/board-nokia770.c 2010-11-05 17:36:26.186000001 +0100 ++++ linux-2.6.37-rc1/arch/arm/mach-omap1/board-nokia770.c 2010-11-06 17:20:54.534000001 +0100 @@ -36,6 +36,7 @@ #include #include @@ -48,7 +48,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap1/board-nokia770.c Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c =================================================================== --- linux-2.6.37-rc1.orig/arch/arm/mach-omap2/board-n8x0.c 2010-11-01 12:54:12.000000000 +0100 -+++ linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c 2010-11-05 17:37:40.169999973 +0100 ++++ linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c 2010-11-06 17:26:56.824022830 +0100 @@ -18,9 +18,13 @@ #include #include @@ -72,7 +72,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c #include "mux.h" -@@ -40,109 +46,156 @@ +@@ -40,109 +46,154 @@ static int slot2_cover_open; static struct device *mmc_device; @@ -92,11 +92,32 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c -static int tusb_set_power(int state) -{ - int i, retval = 0; +- +- if (state) { +- gpio_set_value(TUSB6010_GPIO_ENABLE, 1); +- msleep(1); +- +- /* Wait until TUSB6010 pulls INT pin down */ +- i = 100; +- while (i && gpio_get_value(TUSB6010_GPIO_INT)) { +- msleep(1); +- i--; +- } +- +- if (!i) { +- printk(KERN_ERR "tusb: powerup failed\n"); +- retval = -ENODEV; +- } +- } else { +- gpio_set_value(TUSB6010_GPIO_ENABLE, 0); +- msleep(10); +- } +- +- return retval; +#define RX51_TSC2005_RESET_GPIO 94 +#define RX51_TSC2005_IRQ_GPIO 106 +#define OMAP_TAG_NOKIA_BT 0x4e01 + -+#if 0 +static s16 rx44_keymap[LM8323_KEYMAP_SIZE] = { + [0x01] = KEY_Q, + [0x02] = KEY_K, @@ -170,11 +191,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c + //.pwm1_name = "n810::keyboard", + //.pwm2_name = "n810::cover", +}; -+#endif - -- if (state) { -- gpio_set_value(TUSB6010_GPIO_ENABLE, 1); -- msleep(1); ++ +struct omap_bluetooth_config { + u8 chip_type; + u8 bt_wakeup_gpio; @@ -200,42 +217,16 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c + n8x0_bt_device.dev.platform_data = (void *) bt_config; + if (platform_device_register(&n8x0_bt_device) < 0) + BUG(); -+} - -- /* Wait until TUSB6010 pulls INT pin down */ -- i = 100; -- while (i && gpio_get_value(TUSB6010_GPIO_INT)) { -- msleep(1); -- i--; -- } -+static struct omap2_mcspi_device_config mipid_mcspi_config = { -+ .turbo_mode = 0, -+ .single_channel = 1, -+}; - -- if (!i) { -- printk(KERN_ERR "tusb: powerup failed\n"); -- retval = -ENODEV; -- } -- } else { -- gpio_set_value(TUSB6010_GPIO_ENABLE, 0); -- msleep(10); -- } -+static int slot1_cover_open; -+static int slot2_cover_open; -+static struct device *mmc_device; - -- return retval; --} + } -static struct musb_hdrc_config musb_config = { - .multipoint = 1, - .dyn_fifo = 1, - .num_eps = 16, - .ram_bits = 12, -+static struct omap2_mcspi_device_config p54spi_mcspi_config = { ++static struct omap2_mcspi_device_config mipid_mcspi_config = { + .turbo_mode = 0, -+ .single_channel = 1, ++ .single_channel = 1, }; -static struct musb_hdrc_platform_data tusb_data = { @@ -245,20 +236,15 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c - .mode = MUSB_PERIPHERAL, -#else /* defined(CONFIG_USB_MUSB_HOST) */ - .mode = MUSB_HOST, -+#ifdef CONFIG_MACH_NOKIA_N8X0_LCD -+extern struct mipid_platform_data n8x0_mipid_platform_data; - #endif +-#endif - .set_power = tusb_set_power, - .min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */ - .power = 100, /* Max 100 mA VBUS for host mode */ - .config = &musb_config, -}; - +- -static void __init n8x0_usb_init(void) -+#ifdef CONFIG_TOUCHSCREEN_TSC2005 -+static struct tsc2005_platform_data tsc2005_config; -+static void rx51_tsc2005_set_reset(bool enable) - { +-{ - int ret = 0; - static char announce[] __initdata = KERN_INFO "TUSB 6010\n"; - @@ -272,25 +258,39 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c - gpio_direction_output(TUSB6010_GPIO_ENABLE, 0); - - tusb_set_power(0); -- ++static int slot1_cover_open; ++static int slot2_cover_open; ++static struct device *mmc_device; + - ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2, - TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS, - TUSB6010_GPIO_INT, TUSB6010_DMACHAN); - if (ret != 0) - goto err; -- + - printk(announce); -- ++static struct omap2_mcspi_device_config p54spi_mcspi_config = { ++ .turbo_mode = 0, ++ .single_channel = 1, ++}; + - return; -- ++#ifdef CONFIG_MACH_NOKIA_N8X0_LCD ++extern struct mipid_platform_data n8x0_mipid_platform_data; ++#endif + -err: - gpio_free(TUSB6010_GPIO_ENABLE); ++#ifdef CONFIG_TOUCHSCREEN_TSC2005 ++static struct tsc2005_platform_data tsc2005_config; ++static void rx51_tsc2005_set_reset(bool enable) ++{ + gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); } -#else - --static void __init n8x0_usb_init(void) {} - +-static void __init n8x0_usb_init(void) {} + -#endif /*CONFIG_USB_TUSB6010 */ - - @@ -315,7 +315,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c { .modalias = "p54spi", .bus_num = 2, -@@ -150,7 +203,71 @@ +@@ -150,8 +201,60 @@ .max_speed_hz = 48000000, .controller_data = &p54spi_mcspi_config, }, @@ -328,8 +328,8 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c + .controller_data = &tsc2005_mcspi_config, + .platform_data = &tsc2005_config, + }, -+}; -+ + }; + +static void __init tsc2005_set_config(void) +{ + const struct omap_lcd_config *conf; @@ -373,21 +373,10 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c + } +} + -+#if 0 -+static struct i2c_board_info __initdata_or_module n8x0_i2c_board_info_2[] = {}; -+ -+static struct i2c_board_info __initdata_or_module n810_i2c_board_info_2[] = { -+ { -+ I2C_BOARD_INFO("lm8323", 0x45), -+ .irq = OMAP_GPIO_IRQ(109), -+ .platform_data = &lm8323_pdata, -+ }, - }; -+#endif - #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) -@@ -184,6 +301,20 @@ + +@@ -184,6 +287,20 @@ }, }; @@ -408,7 +397,19 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c static struct omap_onenand_platform_data board_onenand_data = { .cs = 0, .gpio_irq = 26, -@@ -657,10 +788,62 @@ +@@ -626,6 +743,11 @@ + + static struct i2c_board_info n810_i2c_board_info_2[] __initdata = { + { ++ I2C_BOARD_INFO("lm8323", 0x45), ++ .irq = OMAP_GPIO_IRQ(109), ++ .platform_data = &lm8323_pdata, ++ }, ++ { + I2C_BOARD_INFO("tlv320aic3x", 0x18), + .platform_data = &n810_aic33_data, + }, +@@ -657,10 +779,62 @@ #define board_mux NULL #endif @@ -471,10 +472,21 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c spi_register_board_info(n800_spi_board_info, ARRAY_SIZE(n800_spi_board_info)); omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1, +@@ -671,6 +845,10 @@ + ARRAY_SIZE(n810_i2c_board_info_2)); + + omap_serial_init(); ++ ++ n8x0_mipid_init(); ++ n8x0_blizzard_init(); ++ + n8x0_onenand_init(); + n8x0_mmc_init(); + n8x0_usb_init(); Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0-lcd.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0-lcd.c 2010-11-05 17:36:45.209000001 +0100 ++++ linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0-lcd.c 2010-11-06 17:26:25.503999974 +0100 @@ -0,0 +1,127 @@ +/* + * linux/arch/arm/mach-omap2/board-n8x0.c @@ -606,7 +618,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0-lcd.c Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0-usb.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0-usb.c 2010-11-05 17:36:26.187000001 +0100 ++++ linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0-usb.c 2010-11-06 17:20:54.534000001 +0100 @@ -0,0 +1,175 @@ +/* + * linux/arch/arm/mach-omap2/board-n8x0-usb.c @@ -786,7 +798,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0-usb.c Index: linux-2.6.37-rc1/arch/arm/mach-omap2/control.c =================================================================== --- linux-2.6.37-rc1.orig/arch/arm/mach-omap2/control.c 2010-11-01 12:54:12.000000000 +0100 -+++ linux-2.6.37-rc1/arch/arm/mach-omap2/control.c 2010-11-05 17:36:26.187000001 +0100 ++++ linux-2.6.37-rc1/arch/arm/mach-omap2/control.c 2010-11-06 17:20:54.534000001 +0100 @@ -172,6 +172,7 @@ return __raw_readw(OMAP_CTRL_REGADDR(offset)); } @@ -806,7 +818,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/control.c Index: linux-2.6.37-rc1/arch/arm/mach-omap2/Kconfig =================================================================== --- linux-2.6.37-rc1.orig/arch/arm/mach-omap2/Kconfig 2010-11-01 12:54:12.000000000 +0100 -+++ linux-2.6.37-rc1/arch/arm/mach-omap2/Kconfig 2010-11-05 17:36:26.187000001 +0100 ++++ linux-2.6.37-rc1/arch/arm/mach-omap2/Kconfig 2010-11-06 17:20:54.534000001 +0100 @@ -210,6 +210,16 @@ select MACH_NOKIA_N810 select MACH_NOKIA_N810_WIMAX @@ -827,7 +839,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/Kconfig Index: linux-2.6.37-rc1/arch/arm/mach-omap2/Makefile =================================================================== --- linux-2.6.37-rc1.orig/arch/arm/mach-omap2/Makefile 2010-11-01 12:54:12.000000000 +0100 -+++ linux-2.6.37-rc1/arch/arm/mach-omap2/Makefile 2010-11-05 17:36:26.187000001 +0100 ++++ linux-2.6.37-rc1/arch/arm/mach-omap2/Makefile 2010-11-06 17:20:54.534000001 +0100 @@ -139,6 +139,8 @@ hsmmc.o \ board-flash.o @@ -840,35 +852,30 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/Makefile Index: linux-2.6.37-rc1/arch/arm/mach-omap2/serial.c =================================================================== --- linux-2.6.37-rc1.orig/arch/arm/mach-omap2/serial.c 2010-11-01 12:54:12.000000000 +0100 -+++ linux-2.6.37-rc1/arch/arm/mach-omap2/serial.c 2010-11-05 17:36:26.187000001 +0100 -@@ -545,10 +545,10 @@ ++++ linux-2.6.37-rc1/arch/arm/mach-omap2/serial.c 2010-11-06 17:20:54.535000001 +0100 +@@ -545,14 +545,17 @@ uart->padconf = 0; } -- uart->irqflags |= IRQF_SHARED; -+/* uart->irqflags |= IRQF_SHARED; ++#if 1 + uart->irqflags |= IRQF_SHARED; ret = request_threaded_irq(uart->irq, NULL, omap_uart_interrupt, IRQF_SHARED, "serial idle", (void *)uart); -- WARN_ON(ret); -+ WARN_ON(ret); */ + WARN_ON(ret); ++#endif } void omap_uart_enable_irqs(int enable) -@@ -556,7 +556,7 @@ + { ++#if 1 int ret; struct omap_uart_state *uart; -- list_for_each_entry(uart, &uart_list, node) { -+/* list_for_each_entry(uart, &uart_list, node) { - if (enable) { - pm_runtime_put_sync(&uart->pdev->dev); - ret = request_threaded_irq(uart->irq, NULL, -@@ -568,7 +568,7 @@ - pm_runtime_get_noresume(&uart->pdev->dev); +@@ -569,6 +572,7 @@ free_irq(uart->irq, (void *)uart); } -- } -+ } */ + } ++#endif } static ssize_t sleep_timeout_show(struct device *dev, diff --git a/target/linux/omap24xx/patches-2.6.37/900-n810-battery-management.patch b/target/linux/omap24xx/patches-2.6.37/900-n810-battery-management.patch index 1b8316b22..a85eca510 100644 --- a/target/linux/omap24xx/patches-2.6.37/900-n810-battery-management.patch +++ b/target/linux/omap24xx/patches-2.6.37/900-n810-battery-management.patch @@ -12,8 +12,8 @@ Index: linux-2.6.37-rc1/drivers/cbus/Kconfig =================================================================== ---- linux-2.6.37-rc1.orig/drivers/cbus/Kconfig 2010-11-05 17:38:14.843000000 +0100 -+++ linux-2.6.37-rc1/drivers/cbus/Kconfig 2010-11-05 17:38:14.894000001 +0100 +--- linux-2.6.37-rc1.orig/drivers/cbus/Kconfig 2010-11-06 17:28:21.821000000 +0100 ++++ linux-2.6.37-rc1/drivers/cbus/Kconfig 2010-11-06 17:28:21.872000001 +0100 @@ -94,4 +94,16 @@ to Retu/Vilma. Detection state and events are exposed through sysfs. @@ -33,8 +33,8 @@ Index: linux-2.6.37-rc1/drivers/cbus/Kconfig endmenu Index: linux-2.6.37-rc1/drivers/cbus/Makefile =================================================================== ---- linux-2.6.37-rc1.orig/drivers/cbus/Makefile 2010-11-05 17:38:14.834000050 +0100 -+++ linux-2.6.37-rc1/drivers/cbus/Makefile 2010-11-05 17:38:14.894000001 +0100 +--- linux-2.6.37-rc1.orig/drivers/cbus/Makefile 2010-11-06 17:28:21.812000054 +0100 ++++ linux-2.6.37-rc1/drivers/cbus/Makefile 2010-11-06 17:28:21.872000001 +0100 @@ -12,3 +12,6 @@ obj-$(CONFIG_CBUS_TAHVO_USER) += tahvo-user.o obj-$(CONFIG_CBUS_RETU_USER) += retu-user.o @@ -45,7 +45,7 @@ Index: linux-2.6.37-rc1/drivers/cbus/Makefile Index: linux-2.6.37-rc1/drivers/cbus/n810bm_main.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.37-rc1/drivers/cbus/n810bm_main.c 2010-11-05 17:38:14.894000001 +0100 ++++ linux-2.6.37-rc1/drivers/cbus/n810bm_main.c 2010-11-06 17:28:21.872000001 +0100 @@ -0,0 +1,397 @@ +/* + * Nokia n810 battery management @@ -446,8 +446,8 @@ Index: linux-2.6.37-rc1/drivers/cbus/n810bm_main.c +MODULE_AUTHOR("Michael Buesch"); Index: linux-2.6.37-rc1/drivers/cbus/retu.c =================================================================== ---- linux-2.6.37-rc1.orig/drivers/cbus/retu.c 2010-11-05 17:38:14.834000050 +0100 -+++ linux-2.6.37-rc1/drivers/cbus/retu.c 2010-11-05 17:38:14.895000001 +0100 +--- linux-2.6.37-rc1.orig/drivers/cbus/retu.c 2010-11-06 17:28:21.812000054 +0100 ++++ linux-2.6.37-rc1/drivers/cbus/retu.c 2010-11-06 17:28:21.872000001 +0100 @@ -85,10 +85,10 @@ * * This function writes a value to the specified register @@ -463,8 +463,8 @@ Index: linux-2.6.37-rc1/drivers/cbus/retu.c void retu_set_clear_reg_bits(int reg, u16 set, u16 clear) Index: linux-2.6.37-rc1/drivers/cbus/retu.h =================================================================== ---- linux-2.6.37-rc1.orig/drivers/cbus/retu.h 2010-11-05 17:38:14.834000050 +0100 -+++ linux-2.6.37-rc1/drivers/cbus/retu.h 2010-11-05 17:38:14.895000001 +0100 +--- linux-2.6.37-rc1.orig/drivers/cbus/retu.h 2010-11-06 17:28:21.812000054 +0100 ++++ linux-2.6.37-rc1/drivers/cbus/retu.h 2010-11-06 17:28:21.872000001 +0100 @@ -39,6 +39,7 @@ #define RETU_REG_CC2 0x0e /* Common control register 2 */ #define RETU_REG_CTRL_CLR 0x0f /* Regulator clear register */ @@ -484,9 +484,9 @@ Index: linux-2.6.37-rc1/drivers/cbus/retu.h int retu_request_irq(int id, void *irq_handler, unsigned long arg, char *name); Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c =================================================================== ---- linux-2.6.37-rc1.orig/arch/arm/mach-omap2/board-n8x0.c 2010-11-05 17:38:14.819000329 +0100 -+++ linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c 2010-11-05 17:38:14.895000001 +0100 -@@ -908,6 +908,17 @@ +--- linux-2.6.37-rc1.orig/arch/arm/mach-omap2/board-n8x0.c 2010-11-06 17:28:21.796000362 +0100 ++++ linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c 2010-11-06 17:28:21.873000001 +0100 +@@ -899,6 +899,17 @@ ARRAY_SIZE(n8x0_gpio_switches)); } @@ -504,7 +504,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c static void __init n8x0_init_machine(void) { omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC); -@@ -930,6 +941,8 @@ +@@ -925,6 +936,8 @@ n8x0_onenand_init(); n8x0_mmc_init(); n8x0_usb_init(); @@ -516,7 +516,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c Index: linux-2.6.37-rc1/drivers/cbus/lipocharge.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.37-rc1/drivers/cbus/lipocharge.c 2010-11-05 17:38:14.895000001 +0100 ++++ linux-2.6.37-rc1/drivers/cbus/lipocharge.c 2010-11-06 17:28:21.873000001 +0100 @@ -0,0 +1,63 @@ +/* + * Generic LIPO battery charger @@ -584,7 +584,7 @@ Index: linux-2.6.37-rc1/drivers/cbus/lipocharge.c Index: linux-2.6.37-rc1/drivers/cbus/lipocharge.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.37-rc1/drivers/cbus/lipocharge.h 2010-11-05 17:38:14.895000001 +0100 ++++ linux-2.6.37-rc1/drivers/cbus/lipocharge.h 2010-11-06 17:28:21.873000001 +0100 @@ -0,0 +1,50 @@ +#ifndef LIPOCHARGE_H_ +#define LIPOCHARGE_H_ @@ -638,8 +638,8 @@ Index: linux-2.6.37-rc1/drivers/cbus/lipocharge.h +#endif /* LIPOCHARGE_H_ */ Index: linux-2.6.37-rc1/drivers/cbus/tahvo.h =================================================================== ---- linux-2.6.37-rc1.orig/drivers/cbus/tahvo.h 2010-11-05 17:38:14.835000037 +0100 -+++ linux-2.6.37-rc1/drivers/cbus/tahvo.h 2010-11-05 17:38:14.895000001 +0100 +--- linux-2.6.37-rc1.orig/drivers/cbus/tahvo.h 2010-11-06 17:28:21.813000041 +0100 ++++ linux-2.6.37-rc1/drivers/cbus/tahvo.h 2010-11-06 17:28:21.873000001 +0100 @@ -30,8 +30,14 @@ #define TAHVO_REG_IDR 0x01 /* Interrupt ID */ #define TAHVO_REG_IDSR 0x02 /* Interrupt status */