kernel: update linux 3.3 to 3.3.4

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31541 3c298f89-4303-0410-b956-a3cf2f4a3e73

include/kernel-version.mk

@@ -38,8 +38,8 @@ endif
 ifeq ($(LINUX_VERSION),3.2.16)
   LINUX_KERNEL_MD5SUM:=246e6bd28ea44c90ec66c7f8b56e4803
 endif
-ifeq ($(LINUX_VERSION),3.3.3)
+ifeq ($(LINUX_VERSION),3.3.4)
-  LINUX_KERNEL_MD5SUM:=a6897310b4785b5f912c567cdc93402e
+  LINUX_KERNEL_MD5SUM:=113baeccd2a3341ecc62ae5e73c2ed1d
 endif
 
 # disable the md5sum check for unknown kernel versions

target/linux/adm5120/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 BOARD:=adm5120
 BOARDNAME:=Infineon/ADMtek ADM5120
-LINUX_VERSION:=3.3.3
+LINUX_VERSION:=3.3.4
 SUBTARGETS:=router_le router_be rb1xx
 INITRAMFS_EXTRA_FILES:=
 

target/linux/adm8668/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Infineon WildPass ADM8668
 FEATURES:=squashfs
 MAINTAINER:=Florian Fainelli <florian@openwrt.org>
 
-LINUX_VERSION:=3.3.3
+LINUX_VERSION:=3.3.4
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += wpad-mini kmod-rt61-pci

target/linux/ar71xx/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs jffs2 targz
 CFLAGS:=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves
 SUBTARGETS:=generic nand
 
-LINUX_VERSION:=3.3.3
+LINUX_VERSION:=3.3.4
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/at91/Makefile

@@ -14,7 +14,7 @@ FEATURES:=squashfs jffs2 targz ext2 usb
 CFLAGS:=-Os -pipe -march=armv5te -mtune=arm926ej-s -fno-caller-saves
 SUBTARGETS:=9g20 9260 9263
 
-LINUX_VERSION:=3.3.3
+LINUX_VERSION:=3.3.4
 DEVICE_TYPE=
 
 include $(INCLUDE_DIR)/target.mk

target/linux/avr32/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Atmel AVR32
 FEATURES:=squashfs
 MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
 
-LINUX_VERSION:=3.3.3
+LINUX_VERSION:=3.3.4
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/brcm63xx/Makefile

@@ -10,7 +10,7 @@ ARCH:=mips
 BOARD:=brcm63xx
 BOARDNAME:=Broadcom BCM63xx
 FEATURES:=squashfs jffs2 usb atm pci pcmcia
-LINUX_VERSION:=3.3.3
+LINUX_VERSION:=3.3.4
 MAINTAINER:=Florian Fainelli <florian@openwrt.org>
 
 include $(INCLUDE_DIR)/target.mk

target/linux/brcm63xx/patches-3.3/402-ehci-add-driver-for-bcm63xx-integrated-controller.patch

@@ -226,7 +226,7 @@ Subject: [PATCH 25/63] ehci: add driver for bcm63xx integrated controller.
 +MODULE_ALIAS("platform:bcm63xx_ehci");
 --- a/drivers/usb/host/ehci-hcd.c
 +++ b/drivers/usb/host/ehci-hcd.c
-@@ -1376,6 +1376,11 @@ MODULE_LICENSE ("GPL");
+@@ -1381,6 +1381,11 @@ MODULE_LICENSE ("GPL");
  #define        PLATFORM_DRIVER         ehci_mv_driver
  #endif
  

target/linux/brcm63xx/patches-3.3/501-board-NB4.patch

@@ -2,7 +2,7 @@
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
 @@ -17,6 +17,9 @@
  #include <linux/ssb/ssb.h>
- #include <linux/gpio_buttons.h>
+ #include <linux/gpio_keys.h>
  #include <linux/input.h>
 +#include <linux/spi/spi.h>
 +#include <linux/spi/spi_gpio.h>

target/linux/brcm63xx/patches-3.3/550-alice_gate2_leds.patch

@@ -110,4 +110,4 @@
 +	struct gpio_led leds[14];
  
  	/* Buttons */
- 	struct gpio_button buttons[4];
+ 	struct gpio_keys_button buttons[4];

target/linux/brcm63xx/patches-3.3/800-wl_exports.patch

@@ -2,7 +2,7 @@
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
 @@ -17,6 +17,7 @@
  #include <linux/ssb/ssb.h>
- #include <linux/gpio_buttons.h>
+ #include <linux/gpio_keys.h>
  #include <linux/input.h>
 +#include <linux/export.h>
  #include <linux/spi/spi.h>

target/linux/cns21xx/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Cavium Networks Econa CNS21xx
 FEATURES:=squashfs broken
 CFLAGS:=-Os -pipe -march=armv4 -mtune=fa526 -fno-caller-saves
 
-LINUX_VERSION:=3.3.3
+LINUX_VERSION:=3.3.4
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/generic/patches-3.3/100-overlayfs_v12.patch

@@ -3166,7 +3166,7 @@
 +module_exit(ovl_exit);
 --- a/fs/splice.c
 +++ b/fs/splice.c
-@@ -1299,6 +1299,7 @@ long do_splice_direct(struct file *in, l
+@@ -1302,6 +1302,7 @@ long do_splice_direct(struct file *in, l
  
  	return ret;
  }

target/linux/generic/patches-3.3/120-ppp_txqueue_restart.patch

@@ -1,75 +0,0 @@
-commit 9a5d2bd99e0dfe9a31b3c160073ac445ba3d773f
-Author: David Woodhouse <dwmw2@infradead.org>
-Date:   Sun Apr 8 10:01:44 2012 +0000
-
-    ppp: Fix race condition with queue start/stop
-    
-    Commit e675f0cc9a872fd152edc0c77acfed19bf28b81e ("ppp: Don't stop and
-    restart queue on every TX packet") introduced a race condition which
-    could leave the net queue stopped even when the channel is no longer
-    busy. By calling netif_stop_queue() from ppp_start_xmit(), based on the
-    return value from ppp_xmit_process() but *after* all the locks have been
-    dropped, we could potentially do so *after* the channel has actually
-    finished transmitting and attempted to re-wake the queue.
-    
-    Fix this by moving the netif_stop_queue() into ppp_xmit_process() under
-    the xmit lock. I hadn't done this previously, because it gets called
-    from other places than ppp_start_xmit(). But I now think it's the better
-    option. The net queue *should* be stopped if the channel becomes
-    congested due to writes from pppd, anyway.
-    
-    Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-    Signed-off-by: David S. Miller <davem@davemloft.net>
-
-commit e675f0cc9a872fd152edc0c77acfed19bf28b81e
-Author: David Woodhouse <dwmw2@infradead.org>
-Date:   Mon Mar 26 00:03:42 2012 +0000
-
-    ppp: Don't stop and restart queue on every TX packet
-    
-    For every transmitted packet, ppp_start_xmit() will stop the netdev
-    queue and then, if appropriate, restart it. This causes the TX softirq
-    to run, entirely gratuitously.
-    
-    This is "only" a waste of CPU time in the normal case, but it's actively
-    harmful when the PPP device is a TEQL slave — the wakeup will cause the
-    offending device to receive the next TX packet from the TEQL queue, when
-    it *should* have gone to the next slave in the list. We end up seeing
-    large bursts of packets on just *one* slave device, rather than using
-    the full available bandwidth over all slaves.
-    
-    This patch fixes the problem by *not* unconditionally stopping the queue
-    in ppp_start_xmit(). It adds a return value from ppp_xmit_process()
-    which indicates whether the queue should be stopped or not.
-    
-    It *doesn't* remove the call to netif_wake_queue() from
-    ppp_xmit_process(), because other code paths (especially from
-    ppp_output_wakeup()) need it there and it's messy to push it out to the
-    other callers to do it based on the return value. So we leave it in
-    place — it's a no-op in the case where the queue wasn't stopped, so it's
-    harmless in the TX path.
-    
-    Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-    Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
-
---- a/drivers/net/ppp/ppp_generic.c
-+++ b/drivers/net/ppp/ppp_generic.c
-@@ -968,7 +968,6 @@ ppp_start_xmit(struct sk_buff *skb, stru
- 	proto = npindex_to_proto[npi];
- 	put_unaligned_be16(proto, pp);
- 
--	netif_stop_queue(dev);
- 	skb_queue_tail(&ppp->file.xq, skb);
- 	ppp_xmit_process(ppp);
- 	return NETDEV_TX_OK;
-@@ -1063,6 +1062,8 @@ ppp_xmit_process(struct ppp *ppp)
- 		   code that we can accept some more. */
- 		if (!ppp->xmit_pending && !skb_peek(&ppp->file.xq))
- 			netif_wake_queue(ppp->dev);
-+		else
-+			netif_stop_queue(ppp->dev);
- 	}
- 	ppp_xmit_unlock(ppp);
- }

target/linux/generic/patches-3.3/642-bridge_port_isolate.patch

@@ -1,6 +1,6 @@
 --- a/net/bridge/br_private.h
 +++ b/net/bridge/br_private.h
-@@ -139,6 +139,7 @@ struct net_bridge_port
+@@ -135,6 +135,7 @@ struct net_bridge_port
  
  	unsigned long 			flags;
  #define BR_HAIRPIN_MODE		0x00000001

target/linux/generic/patches-3.3/644-bridge_optimize_netfilter_hooks.patch

@@ -58,7 +58,7 @@
  	default:
 --- a/net/bridge/br_multicast.c
 +++ b/net/bridge/br_multicast.c
-@@ -827,7 +827,7 @@ static void __br_multicast_send_query(st
+@@ -753,7 +753,7 @@ static void __br_multicast_send_query(st
  	if (port) {
  		__skb_push(skb, sizeof(struct ethhdr));
  		skb->dev = port->dev;
@@ -87,7 +87,7 @@
  	if (vlan_tx_tag_present(skb))
 --- a/net/bridge/br_private.h
 +++ b/net/bridge/br_private.h
-@@ -490,15 +490,29 @@ static inline bool br_multicast_is_route
+@@ -486,15 +486,29 @@ static inline bool br_multicast_is_route
  
  /* br_netfilter.c */
  #ifdef CONFIG_BRIDGE_NETFILTER

target/linux/lantiq/patches-3.3/0044-MIPS-lantiq-adds-dwc_otg.patch

@@ -69,7 +69,7 @@ Subject: [PATCH 44/70] MIPS: lantiq: adds dwc_otg
  obj-$(CONFIG_USB_WDM)		+= class/
 --- a/drivers/usb/core/hub.c
 +++ b/drivers/usb/core/hub.c
-@@ -2938,11 +2938,11 @@ hub_port_init (struct usb_hub *hub, stru
+@@ -2935,11 +2935,11 @@ hub_port_init (struct usb_hub *hub, stru
  		udev->ttport = hdev->ttport;
  	} else if (udev->speed != USB_SPEED_HIGH
  			&& hdev->speed == USB_SPEED_HIGH) {

target/linux/malta/Makefile

@@ -13,7 +13,7 @@ SUBTARGETS:=le be
 INITRAMFS_EXTRA_FILES:=
 MAINTAINER:=Florian Fainelli <florian@openwrt.org>
 
-LINUX_VERSION:=3.3.3
+LINUX_VERSION:=3.3.4
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/mpc52xx/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Freescale MPC52xx
 CFLAGS:=-Os -pipe -fno-caller-saves -mcpu=603e
 FEATURES:=targz ext4
 
-LINUX_VERSION:=3.3.3
+LINUX_VERSION:=3.3.4
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ppc40x/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs
 CFLAGS:=-Os -pipe -fno-caller-saves -mcpu=405
 MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
 
-LINUX_VERSION:=3.3.3
+LINUX_VERSION:=3.3.4
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ramips/Makefile

@@ -13,7 +13,7 @@ SUBTARGETS:=rt288x rt305x rt3883
 CFLAGS:=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves
 FEATURES:=squashfs
 
-LINUX_VERSION:=3.3.3
+LINUX_VERSION:=3.3.4
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES+=\

target/linux/ramips/patches-3.3/200-rt3883-ehci-glue.patch

@@ -18,7 +18,7 @@
  	depends on USB
 --- a/drivers/usb/host/ehci-hcd.c
 +++ b/drivers/usb/host/ehci-hcd.c
-@@ -1376,6 +1376,11 @@ MODULE_LICENSE ("GPL");
+@@ -1381,6 +1381,11 @@ MODULE_LICENSE ("GPL");
  #define        PLATFORM_DRIVER         ehci_mv_driver
  #endif
  

target/linux/uml/Makefile

@@ -23,7 +23,7 @@ BOARDNAME:=User Mode Linux
 FEATURES:=ext4 audio
 MAINTAINER:=Florian Fainelli <florian@openwrt.org>
 
-LINUX_VERSION:=3.3.3
+LINUX_VERSION:=3.3.4
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/x86/geos/target.mk

@@ -1,4 +1,4 @@
-LINUX_VERSION:=3.3.3
+LINUX_VERSION:=3.3.4
 BOARDNAME:=Traverse Geos
 FEATURES:=squashfs jffs2 ext4 pci usb gpio
 DEFAULT_PACKAGES += \