1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2025-04-21 12:27:27 +03:00

Merge commit 'openwrt-backfire/master' into xburst

Conflicts:

	package/mac80211/patches/120-compat_rcu_dereference.patch
	package/mac80211/patches/130-tracepoint_include_linux_version_h.patch
	target/linux/x86/Makefile
This commit is contained in:
Mirko Vogt
2010-05-12 19:47:13 +02:00
107 changed files with 1184 additions and 1610 deletions

View File

@@ -25,7 +25,7 @@ include $(INCLUDE_DIR)/package.mk
define KernelPackage/acx
TITLE:=Driver for TI ACX1xx chipset
DEPENDS:=@LINUX_2_6 @TARGET_ar7 +wireless-tools
DEPENDS:=@LINUX_2_6 @PCI_SUPPORT||TARGET_ar7 +wireless-tools
URL:=http://acx100.sourceforge.net/
SUBMENU:=Wireless Drivers
FILES:= $(PKG_BUILD_DIR)/acx.$(LINUX_KMOD_SUFFIX)

View File

@@ -1,10 +1,12 @@
--- a/pci.c
+++ b/pci.c
@@ -4135,6 +4135,18 @@ static struct vlynq_device_id acx_vlynq_
{ 0, 0, 0 },
};
Index: acx-20080210/pci.c
===================================================================
--- acx-20080210.orig/pci.c 2010-05-02 21:37:00.000000000 +0200
+++ acx-20080210/pci.c 2010-05-02 21:48:22.000000000 +0200
@@ -1437,6 +1437,18 @@
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,31)
static void dummy_netdev_init(struct net_device *ndev) {}
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)
+static const struct net_device_ops acx_netdev_ops = {
+ .ndo_open = &acxpci_e_open,
+ .ndo_stop = &acxpci_e_close,
@@ -16,14 +18,39 @@
+};
+#endif
+
static __devinit int vlynq_probe(struct vlynq_device *vdev,
struct vlynq_device_id *id)
#ifdef CONFIG_PCI
static int __devinit acxpci_e_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
@@ -4191,17 +4203,24 @@ static __devinit int vlynq_probe(struct
@@ -1547,17 +1559,21 @@
}
ether_setup(ndev);
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30))
ndev->open = &acxpci_e_open;
ndev->stop = &acxpci_e_close;
ndev->hard_start_xmit = &acx_i_start_xmit;
ndev->get_stats = &acx_e_get_stats;
+ ndev->set_multicast_list = &acxpci_i_set_multicast_list;
+ ndev->tx_timeout = &acxpci_i_tx_timeout;
+ ndev->change_mtu = &acx_e_change_mtu;
+#else
+ ndev->netdev_ops = &acx_netdev_ops;
+#endif
#if IW_HANDLER_VERSION <= 5
ndev->get_wireless_stats = &acx_e_get_wireless_stats;
#endif
ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def;
- ndev->set_multicast_list = &acxpci_i_set_multicast_list;
- ndev->tx_timeout = &acxpci_i_tx_timeout;
- ndev->change_mtu = &acx_e_change_mtu;
ndev->watchdog_timeo = 4 * HZ;
ndev->irq = pdev->irq;
ndev->base_addr = pci_resource_start(pdev, 0);
@@ -4191,17 +4207,24 @@
goto fail_alloc_netdev;
}
ether_setup(ndev);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31)
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)
ndev->open = &acxpci_e_open;
ndev->stop = &acxpci_e_close;
ndev->hard_start_xmit = &acx_i_start_xmit;

View File

@@ -434,8 +434,10 @@ ifeq ($(CONFIG_EXTERNAL_TOOLCHAIN),)
$(TOOLCHAIN_DIR)/lib/libuClibc-$(LIBC_SO_VERSION).so \
$(1)/lib/
for file in libcrypt libdl libm libnsl libresolv libutil; do \
$(CP) $(TOOLCHAIN_DIR)/lib/$$$$file.so.* $(1)/lib/; \
$(CP) $(TOOLCHAIN_DIR)/lib/$$$$file-$(LIBC_SO_VERSION).so $(1)/lib/; \
$(CP) \
$(TOOLCHAIN_DIR)/lib/$$$$file.so.* \
$(TOOLCHAIN_DIR)/lib/$$$$file-$(LIBC_SO_VERSION).so \
$(1)/lib/; \
done
endef

View File

@@ -12,6 +12,8 @@ addif() {
# PPP devices are configured by pppd, no need to run setup_interface here
case "$INTERFACE" in
ppp*) return 0;;
ath*) return 0;;
wlan*) return 0;;
esac
scan_interfaces

View File

@@ -26,7 +26,7 @@ endef
define Package/block-extroot
$(call Package/block-extroot/Default)
MENU:=1
DEPENDS:=+block-mount @PACKAGE_kmod-ide-core||PACKAGE_kmod-usb-storage||PACKAGE_kmod-mmc||PACKAGE_kmod-broadcom-sdhc
DEPENDS:=+block-mount @PACKAGE_kmod-ide-core||PACKAGE_kmod-ata-core||PACKAGE_kmod-usb-storage||PACKAGE_kmod-mmc||PACKAGE_kmod-broadcom-sdhc
endef
define Package/block-extroot/config

View File

@@ -1,69 +0,0 @@
#
# Copyright (C) 2006 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
PKG_NAME:=goldfish-qemu
PKG_VERSION:=20090429
PKG_RELEASE:=1
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:=git://android.git.kernel.org/platform/external/qemu
PKG_SOURCE_PROTO:=git
PKG_SOURCE_VERSION:=2b8ea29e2bd12f876a4d06647e6077bf72de567e
PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
PKG_TARGETS:=bin
include $(INCLUDE_DIR)/package.mk
define Package/goldfish-qemu
SECTION:=emulator
CATEGORY:=Emulators
DEPENDS:=@TARGET_goldfish
TITLE:=A modified version of the Google Android Emulator
URL:=http://www.android.com/
endef
LIBSDL_PATCHED:=sdl-1.2.12-android-20080919
define Download/libsdl-patched
FILE:=$(LIBSDL_PATCHED).tar.gz
URL:=http://android.git.kernel.org/pub
MD5SUM:=22df8cbb2ecb811938eba8410e861650
endef
$(eval $(call Download,libsdl-patched))
Build/Exports=
define Build/Prepare
$(call Build/Prepare/Default)
zcat $(DL_DIR)/$(LIBSDL_PATCHED).tar.gz | tar x -C $(PKG_BUILD_DIR)
endef
define Build/Configure
[ -x $(PKG_BUILD_DIR)/libsdl/bin/sdl-config ] || ( \
cd $(PKG_BUILD_DIR)/$(LIBSDL_PATCHED); \
./android-configure --prefix=$(PKG_BUILD_DIR)/libsdl; \
make all install; \
)
endef
define Build/Compile
(cd $(PKG_BUILD_DIR); \
[ -f $(PKG_BUILD_DIR)/objs/config.make ] || \
./android-configure.sh --sdl-config=$(PKG_BUILD_DIR)/libsdl/bin/sdl-config \
)
$(MAKE) -C $(PKG_BUILD_DIR)
endef
define Package/goldfish-qemu/install
$(INSTALL_DIR) $(1)
$(CP) $(PKG_BUILD_DIR)/objs/emulator $(1)/
$(CP) ./skins $(1)/
endef
$(eval $(call BuildPackage,goldfish-qemu))

View File

@@ -1,30 +0,0 @@
--- a/android-configure.sh
+++ b/android-configure.sh
@@ -656,6 +656,9 @@ case "$CPU" in
*) HOST_CPU=$CPU
;;
esac
+case "$OS" in
+ darwin*) echo "#define _BSD 1" >> $config_h;;
+esac
echo "#define HOST_$HOST_CPU 1" >> $config_h
log "Generate : $config_h"
--- a/android/utils/display-quartz.m
+++ b/android/utils/display-quartz.m
@@ -34,6 +34,7 @@ get_monitor_resolution( int *px_dpi, in
int
get_nearest_monitor_rect( int *x, int *y, int *width, int *height )
{
+#if 0
SDL_SysWMinfo info;
NSWindow* window;
@@ -108,4 +109,7 @@ get_nearest_monitor_rect( int *x, int
}
return 0;
}
+#else
+ return -1;
+#endif
};

View File

@@ -1,233 +0,0 @@
--- a/android/cmdline-option.c
+++ b/android/cmdline-option.c
@@ -50,16 +50,6 @@ android_parse_options( int *pargc, char
char arg2_tab[64], *arg2 = arg2_tab;
int nn;
- /* process @<name> as a special exception meaning
- * '-avd <name>'
- */
- if (aread[0][0] == '@') {
- opt->avd = aread[0]+1;
- nargs--;
- aread++;
- continue;
- }
-
/* anything that isn't an option past this points
* exits the loop
*/
--- a/android/cmdline-options.h
+++ b/android/cmdline-options.h
@@ -60,21 +60,16 @@
*/
CFG_PARAM( sysdir, "<dir>", "search for system disk images in <dir>" )
-CFG_PARAM( system, "<file>", "read initial system image from <file>" )
-CFG_PARAM( datadir, "<dir>", "write user data into <dir>" )
-CFG_PARAM( kernel, "<file>", "use specific emulated kernel" )
-CFG_PARAM( ramdisk, "<file>", "ramdisk image (default <system>/ramdisk.img" )
-CFG_PARAM( image, "<file>", "obsolete, use -system <file> instead" )
-CFG_PARAM( init_data, "<file>", "initial data image (default <system>/userdata.img" )
-CFG_PARAM( initdata, "<file>", "same as '-init-data <file>'" )
-CFG_PARAM( data, "<file>", "data image (default <datadir>/userdata-qemu.img" )
+CFG_PARAM( system, "<file>", "read system image from <file>, default: <system>/system.img" )
+CFG_PARAM( data, "<file>", "data image, default: <system>/data.img" )
+CFG_PARAM( kernel, "<file>", "use specific emulated kernel, default: kernel.bin" )
+CFG_PARAM( ramdisk, "<file>", "ramdisk image (default <system>/ramdisk.bin" )
CFG_PARAM( partition_size, "<size>", "system/data partition size in MBs" )
CFG_PARAM( cache, "<file>", "cache partition image (default is temporary file)" )
CFG_FLAG ( no_cache, "disable the cache partition" )
CFG_FLAG ( nocache, "same as -no-cache" )
OPT_PARAM( sdcard, "<file>", "SD card image (default <system>/sdcard.img")
OPT_FLAG ( wipe_data, "reset the use data image (copy it from initdata)" )
-CFG_PARAM( avd, "<name>", "use a specific android virtual device" )
CFG_PARAM( skindir, "<dir>", "search skins in <dir> (default <system>/skins)" )
CFG_PARAM( skin, "<name>", "select a given skin" )
CFG_FLAG ( no_skin, "don't use any emulator skin" )
--- a/android/main.c
+++ b/android/main.c
@@ -1606,6 +1606,7 @@ report_console( const char* proto_port,
* containing 'fileName'. this is *not* the full
* path to 'fileName'.
*/
+
static char*
_getSdkImagePath( const char* fileName )
{
@@ -1617,8 +1618,6 @@ _getSdkImagePath( const char* fileName
static const char* const searchPaths[] = {
"", /* program's directory */
- "/lib/images", /* this is for SDK 1.0 */
- "/../platforms/android-1.1/images", /* this is for SDK 1.1 */
NULL
};
@@ -1841,25 +1840,7 @@ int main(int argc, char **argv)
}
}
- /* legacy support: we used to use -system <dir> and -image <file>
- * instead of -sysdir <dir> and -system <file>, so handle this by checking
- * whether the options point to directories or files.
- */
- if (opts->image != NULL) {
- if (opts->system != NULL) {
- if (opts->sysdir != NULL) {
- derror( "You can't use -sysdir, -system and -image at the same time.\n"
- "You should probably use '-sysdir <path> -system <file>'.\n" );
- exit(2);
- }
- }
- dwarning( "Please note that -image is obsolete and that -system is now used to point\n"
- "to the system image. Next time, try using '-sysdir <path> -system <file>' instead.\n" );
- opts->sysdir = opts->system;
- opts->system = opts->image;
- opts->image = NULL;
- }
- else if (opts->system != NULL && path_is_dir(opts->system)) {
+ if (opts->system != NULL && path_is_dir(opts->system)) {
if (opts->sysdir != NULL) {
derror( "Option -system should now be followed by a file path, not a directory one.\n"
"Please use '-sysdir <path>' to point to the system directory.\n" );
@@ -1885,49 +1866,11 @@ int main(int argc, char **argv)
if (opts->noskin)
opts->no_skin = opts->noskin;
- if (opts->initdata) {
- opts->init_data = opts->initdata;
- opts->initdata = NULL;
- }
-
- /* If no AVD name was given, try to find the top of the
- * Android build tree
- */
- if (opts->avd == NULL) {
- do {
- char* out = getenv("ANDROID_PRODUCT_OUT");
-
- if (out == NULL || out[0] == 0)
- break;
-
- if (!path_exists(out)) {
- derror("Can't access ANDROID_PRODUCT_OUT as '%s'\n"
- "You need to build the Android system before launching the emulator",
- out);
- exit(2);
- }
-
- android_build_root = path_parent( out, 4 );
- if (android_build_root == NULL || !path_exists(android_build_root)) {
- derror("Can't find the Android build root from '%s'\n"
- "Please check the definition of the ANDROID_PRODUCT_OUT variable.\n"
- "It should point to your product-specific build output directory.\n",
- out );
- exit(2);
- }
- android_build_out = out;
- D( "found Android build root: %s", android_build_root );
- D( "found Android build out: %s", android_build_out );
- } while (0);
- }
/* if no virtual device name is given, and we're not in the
* Android build system, we'll need to perform some auto-detection
* magic :-)
*/
- if (opts->avd == NULL && !android_build_out)
{
- char dataDirIsSystem = 0;
-
if (!opts->sysdir) {
opts->sysdir = _getSdkImagePath("system.img");
if (!opts->sysdir) {
@@ -1945,47 +1888,30 @@ int main(int argc, char **argv)
}
if (!opts->system) {
- opts->system = _getSdkSystemImage(opts->sysdir, "-image", "system.img");
- D("autoconfig: -image %s", opts->image);
+ opts->system = _getSdkSystemImage(opts->sysdir, "-system", "system.img");
+ D("autoconfig: -system %s", opts->system);
}
if (!opts->kernel) {
- opts->kernel = _getSdkSystemImage(opts->sysdir, "-kernel", "kernel-qemu");
+ opts->kernel = _getSdkSystemImage(opts->sysdir, "-kernel", "kernel.bin");
D("autoconfig: -kernel %s", opts->kernel);
}
if (!opts->ramdisk) {
- opts->ramdisk = _getSdkSystemImage(opts->sysdir, "-ramdisk", "ramdisk.img");
+ opts->ramdisk = _getSdkSystemImage(opts->sysdir, "-ramdisk", "ramdisk.bin");
D("autoconfig: -ramdisk %s", opts->ramdisk);
}
- /* if no data directory is specified, use the system directory */
- if (!opts->datadir) {
- opts->datadir = qemu_strdup(opts->sysdir);
- dataDirIsSystem = 1;
- D("autoconfig: -datadir %s", opts->sysdir);
- }
-
if (!opts->data) {
/* check for userdata-qemu.img in the data directory */
- bufprint(tmp, tmpend, "%s/userdata-qemu.img", opts->datadir);
- if (!path_exists(tmp)) {
- derror(
- "You did not provide the name of an Android Virtual Device\n"
- "with the '-avd <name>' option. Read -help-avd for more information.\n\n"
-
- "If you *really* want to *NOT* run an AVD, consider using '-data <file>'\n"
- "to specify a data partition image file (I hope you know what you're doing).\n"
- );
- exit(2);
- }
+ bufprint(tmp, tmpend, "%s/data.img", opts->sysdir);
opts->data = qemu_strdup(tmp);
D("autoconfig: -data %s", opts->data);
}
- if (!opts->sdcard && opts->datadir) {
- bufprint(tmp, tmpend, "%s/sdcard.img", opts->datadir);
+ if (!opts->sdcard && opts->sysdir) {
+ bufprint(tmp, tmpend, "%s/sdcard.img", opts->sysdir);
if (path_exists(tmp)) {
opts->sdcard = qemu_strdup(tmp);
D("autoconfig: -sdcard %s", opts->sdcard);
@@ -2029,19 +1955,6 @@ int main(int argc, char **argv)
android_avdParams->skinName = opts->skin;
android_avdParams->skinRootPath = opts->skindir;
- /* setup the virtual device differently depending on whether
- * we are in the Android build system or not
- */
- if (opts->avd != NULL)
- {
- android_avdInfo = avdInfo_new( opts->avd, android_avdParams );
- if (android_avdInfo == NULL) {
- /* an error message has already been printed */
- dprint("could not find virtual device named '%s'", opts->avd);
- exit(1);
- }
- }
- else
{
if (!android_build_out) {
android_build_out = android_build_root = opts->sysdir;
--- a/android/avd/info.c
+++ b/android/avd/info.c
@@ -1233,10 +1233,8 @@ _getBuildImagePaths( AvdInfo* i, AvdInf
** take care of checking the state
**/
imageLoader_set ( l, AVD_IMAGE_INITSYSTEM );
- imageLoader_load( l, IMAGE_REQUIRED | IMAGE_DONT_LOCK );
-
- /* force the system image to read-only status */
- l->pState[0] = IMAGE_STATE_READONLY;
+ l->pState[0] = IMAGE_STATE_MUSTLOCK;
+ imageLoader_load( l, IMAGE_REQUIRED );
/** cache partition handling
**/

Binary file not shown.

Before

Width:  |  Height:  |  Size: 3.4 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 4.0 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 4.0 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 3.4 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 3.5 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 44 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 3.5 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 3.5 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 2.8 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 11 KiB

View File

@@ -1,380 +0,0 @@
parts {
device {
background {
image device.png
}
display {
width 320
height 480
x 31
y 72
}
buttons {
soft-left {
image menu.png
x 147
y 555
}
home {
image home.png
x 48
y 590
}
back {
image back.png
x 286
y 590
}
dpad-up {
image arrow_up.png
x 140
y 595
}
dpad-down {
image arrow_down.png
x 140
y 656
}
dpad-left {
image arrow_left.png
x 111
y 598
}
dpad-right {
image arrow_right.png
x 222
y 598
}
dpad-center {
image select.png
x 142
y 626
}
phone-dial {
image send.png
x 48
y 646
}
phone-hangup {
image end.png
x 286
y 646
}
power {
image power.png
x -38
y 52
}
volume-up {
image volume_up.png
x 362
y 260
}
volume-down {
image volume_down.png
x 362
y 310
}
}
}
keyboard {
background {
image keyboard.png
}
buttons {
1 {
image key.png
x 0
y 0
}
2 {
image key.png
x 37
y 0
}
3 {
image key.png
x 74
y 0
}
4 {
image key.png
x 111
y 0
}
5 {
image key.png
x 148
y 0
}
6 {
image key.png
x 185
y 0
}
7 {
image key.png
x 222
y 0
}
8 {
image key.png
x 259
y 0
}
9 {
image key.png
x 296
y 0
}
0 {
image key.png
x 333
y 0
}
q {
image key.png
x 0
y 36
}
w {
image key.png
x 37
y 36
}
e {
image key.png
x 74
y 36
}
r {
image key.png
x 111
y 36
}
t {
image key.png
x 148
y 36
}
y {
image key.png
x 185
y 36
}
u {
image key.png
x 222
y 36
}
i {
image key.png
x 259
y 36
}
o {
image key.png
x 296
y 36
}
p {
image key.png
x 333
y 36
}
a {
image key.png
x 0
y 72
}
s {
image key.png
x 37
y 72
}
d {
image key.png
x 74
y 72
}
f {
image key.png
x 111
y 72
}
g {
image key.png
x 148
y 72
}
h {
image key.png
x 185
y 72
}
j {
image key.png
x 222
y 72
}
k {
image key.png
x 259
y 72
}
l {
image key.png
x 296
y 72
}
DEL {
image key.png
x 333
y 72
}
CAP {
image key.png
x 0
y 108
}
z {
image key.png
x 37
y 108
}
x {
image key.png
x 74
y 108
}
c {
image key.png
x 111
y 108
}
v {
image key.png
x 148
y 108
}
b {
image key.png
x 185
y 108
}
n {
image key.png
x 222
y 108
}
m {
image key.png
x 259
y 108
}
PERIOD {
image key.png
x 296
y 108
}
ENTER {
image key.png
x 333
y 108
}
ALT {
image key.png
x 0
y 144
}
SYM {
image key.png
x 37
y 144
}
AT {
image key.png
x 74
y 144
}
SPACE {
image spacebar.png
x 111
y 144
}
SLASH {
image key.png
x 259
y 144
}
COMMA {
image key.png
x 296
y 144
}
ALT2 {
image key.png
x 333
y 144
}
}
}
}
layouts {
portrait {
width 900
height 730
color 0xe0e0e0
event EV_SW:0:1
part1 {
name device
x 40
y -18
}
part2 {
name keyboard
x 480
y 200
}
}
landscape {
width 900
height 670
color 0xe0e0e0
event EV_SW:0:0
part1 {
name device
x 50
y 440
rotation 3
}
part2 {
name keyboard
x 250
y 470
}
}
}
keyboard {
charmap qwerty2
}
network {
speed full
delay none
}

Binary file not shown.

Before

Width:  |  Height:  |  Size: 3.0 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 3.7 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 3.3 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 3.5 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 2.8 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 3.5 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 3.8 KiB

View File

@@ -1,5 +1,5 @@
#
# Copyright (C) 2006-2009 OpenWrt.org
# Copyright (C) 2006-2010 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
@@ -10,71 +10,62 @@ include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=grub
PKG_VERSION:=0.97
PKG_RELEASE:=2
PKG_RELEASE:=3
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:=ftp://alpha.gnu.org/gnu/grub
PKG_MD5SUM:=cd3f3eb54446be6003156158d51f4884
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/grub-$(PKG_VERSION)
PKG_TARGETS:=bin
PKG_BUILD_DEPENDS:= grub/host
PKG_INSTALL:=1
include $(INCLUDE_DIR)/host-build.mk
include $(INCLUDE_DIR)/package.mk
export grub_cv_prog_objcopy_absolute=yes
define Package/grub
SECTION:=boot
DEPENDS:=@TARGET_x86
CATEGORY:=Boot Loaders
SUBMENU:=Boot Loaders
CATEGORY:=Utilities
SECTION:=utils
TITLE:=GRand Unified Bootloader
URL:=http://www.gnu.org/software/grub/
DEPENDS:=@TARGET_x86
endef
CONFIGURE_FLAGS:= \
--target=$(GNU_TARGET_NAME) \
--host=$(GNU_TARGET_NAME) \
--build=$(GNU_HOST_NAME)
ifneq ($(HOST_OS),Darwin)
define Build/Configure
(cd $(PKG_BUILD_DIR); \
LDFLAGS="-static" \
./configure \
$(CONFIGURE_FLAGS) \
--program-prefix="" \
--program-suffix="" \
--prefix=/usr \
--exec-prefix=/usr \
--bindir=/usr/bin \
--sbindir=/usr/sbin \
--libexecdir=/usr/lib \
--sysconfdir=/etc \
--datadir=/usr/share \
--localstatedir=/var \
--mandir=/usr/man \
--infodir=/usr/info \
$(DISABLE_NLS) \
--disable-auto-linux-mem-opt \
)
endef
MY_CONFIGURE_ARGS += \
--disable-auto-linux-mem-opt \
--disable-hercules \
--without-curses \
#
# ./configure detects whether the host compiler supports
# -fno-stack-protector but only sets STAGE2_CFLAGS accordingly
#
define Build/Compile
$(MAKE) -C $(PKG_BUILD_DIR) \
GRUB_CFLAGS="\$$$$(STAGE2_CFLAGS)" \
STAGE1_CFLAGS="\$$$$(STAGE2_CFLAGS)"
endef
MY_CONFIGURE_VARS += \
grub_cv_prog_objcopy_absolute=yes \
CONFIGURE_ARGS += $(MY_CONFIGURE_ARGS)
CONFIGURE_VARS += $(MY_CONFIGURE_VARS)
HOST_CFLAGS += $(call host-cc-option,-fno-stack-protector)
HOST_CFLAGS += $(call host-cc-option,-U_FORTIFY_SOURCE)
HOST_CONFIGURE_ARGS += $(MY_CONFIGURE_ARGS) \
--sbindir="$(STAGING_DIR_HOST)/bin" \
--disable-graphics \
HOST_CONFIGURE_VARS += $(MY_CONFIGURE_VARS)
define Build/InstallDev
$(MAKE) -C $(PKG_BUILD_DIR) \
DESTDIR="$(STAGING_DIR_HOST)" \
install
mv $(STAGING_DIR_HOST)/usr/sbin/grub $(STAGING_DIR_HOST)/bin
$(INSTALL_DIR) $(1)/usr/lib
$(CP) $(PKG_INSTALL_DIR)/usr/lib/grub $(1)/usr/lib/
endef
endif
define Package/grub/install
$(INSTALL_DIR) $(1)/usr/bin
$(CP) $(PKG_INSTALL_DIR)/usr/bin/* $(1)/usr/bin/
$(INSTALL_DIR) $(1)/usr/lib
$(CP) $(PKG_INSTALL_DIR)/usr/lib/* $(1)/usr/lib/
$(INSTALL_DIR) $(1)/usr/sbin
$(CP) $(PKG_INSTALL_DIR)/usr/sbin/* $(1)/usr/sbin/
endef
$(eval $(call HostBuild))
$(eval $(call BuildPackage,grub))

View File

@@ -8,9 +8,9 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=hostapd
PKG_VERSION:=20100309
PKG_VERSION:=20100418
PKG_RELEASE:=1
PKG_REV:=7b90c16aa9ca377b1a6d160c1ba0f2bd304f7e2f
PKG_REV:=0b86f67a2970403d1b1b6d34ce49f5485ef5dbb3
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
PKG_SOURCE_URL:=git://w1.fi/srv/git/hostap.git

View File

@@ -5,6 +5,11 @@ hostapd_set_bss_options() {
config_get enc "$vif" encryption
config_get wpa_group_rekey "$vif" wpa_group_rekey
config_get_bool ap_isolate "$vif" isolate 0
if [ "$ap_isolate" -gt 0 ]; then
append "$var" "ap_isolate=$ap_isolate" "$N"
fi
# Examples:
# psk-mixed/tkip => WPA1+2 PSK, TKIP

View File

@@ -0,0 +1,21 @@
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -709,6 +709,9 @@ enum nl80211_commands {
* NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE,
* NL80211_CMD_DISASSOCIATE.
*
+ * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations
+ * connected to this BSS.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -864,6 +867,8 @@ enum nl80211_attrs {
NL80211_ATTR_LOCAL_STATE_CHANGE,
+ NL80211_ATTR_AP_ISOLATE,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,

View File

@@ -1,6 +1,6 @@
--- a/src/ap/hostapd.c
+++ b/src/ap/hostapd.c
@@ -650,7 +650,6 @@ static int setup_interface(struct hostap
@@ -659,7 +659,6 @@ static int setup_interface(struct hostap
country[3] = '\0';
if (hostapd_set_country(hapd, country) < 0) {
wpa_printf(MSG_ERROR, "Failed to set country code");

View File

@@ -1,6 +1,6 @@
--- a/src/ap/hostapd.h
+++ b/src/ap/hostapd.h
@@ -238,6 +238,7 @@ struct hostapd_iface {
@@ -245,6 +245,7 @@ struct hostapd_iface {
int (*for_each_interface)(struct hapd_interfaces *interfaces,
int (*cb)(struct hostapd_iface *iface,
void *ctx), void *ctx);
@@ -10,7 +10,7 @@
/* hostapd.c */
--- a/src/ap/hostapd.c
+++ b/src/ap/hostapd.c
@@ -746,6 +746,9 @@ int hostapd_setup_interface_complete(str
@@ -754,6 +754,9 @@ int hostapd_setup_interface_complete(str
wpa_printf(MSG_DEBUG, "%s: Setup of interface done.",
iface->bss[0]->conf->iface);
@@ -55,7 +55,7 @@
hapd_iface->reload_config = hostapd_reload_config;
hapd_iface->config_read_cb = hostapd_config_read;
hapd_iface->config_fname = os_strdup(config_file);
@@ -390,7 +402,7 @@ static int hostapd_global_init(struct ha
@@ -391,7 +403,7 @@ static int hostapd_global_init(struct ha
}
@@ -64,7 +64,7 @@
{
#ifdef EAP_SERVER_TNC
tncs_global_deinit();
@@ -408,8 +420,7 @@ static void hostapd_global_deinit(const
@@ -409,8 +421,7 @@ static void hostapd_global_deinit(const
}
@@ -74,7 +74,7 @@
{
#ifdef EAP_SERVER_TNC
int tnc = 0;
@@ -430,11 +441,6 @@ static int hostapd_global_run(struct hap
@@ -431,11 +442,6 @@ static int hostapd_global_run(struct hap
}
#endif /* EAP_SERVER_TNC */
@@ -86,7 +86,7 @@
eloop_run();
return 0;
@@ -478,8 +484,7 @@ int main(int argc, char *argv[])
@@ -479,8 +485,7 @@ int main(int argc, char *argv[])
struct hapd_interfaces interfaces;
int ret = 1;
size_t i;
@@ -96,7 +96,7 @@
if (os_program_init())
return -1;
@@ -544,7 +549,7 @@ int main(int argc, char *argv[])
@@ -545,7 +550,7 @@ int main(int argc, char *argv[])
goto out;
}
@@ -105,7 +105,7 @@
goto out;
ret = 0;
@@ -555,7 +560,7 @@ int main(int argc, char *argv[])
@@ -556,7 +561,7 @@ int main(int argc, char *argv[])
hostapd_interface_deinit_free(interfaces.iface[i]);
os_free(interfaces.iface);
@@ -116,7 +116,7 @@
os_program_deinit();
--- a/hostapd/config_file.c
+++ b/hostapd/config_file.c
@@ -1855,6 +1855,8 @@ struct hostapd_config * hostapd_config_r
@@ -1857,6 +1857,8 @@ struct hostapd_config * hostapd_config_r
}
#endif /* CONFIG_IEEE80211W */
#ifdef CONFIG_IEEE80211N
@@ -127,7 +127,7 @@
} else if (os_strcmp(buf, "ht_capab") == 0) {
--- a/src/ap/ap_config.h
+++ b/src/ap/ap_config.h
@@ -366,6 +366,7 @@ struct hostapd_config {
@@ -369,6 +369,7 @@ struct hostapd_config {
int ht_op_mode_fixed;
u16 ht_capab;

View File

@@ -26,7 +26,7 @@
LIBS += $(DRV_AP_LIBS)
ifdef CONFIG_L2_PACKET
@@ -738,6 +743,12 @@ install: all
@@ -739,6 +744,12 @@ install: all
BCHECK=../src/drivers/build.hostapd
@@ -39,7 +39,7 @@
hostapd: $(BCHECK) $(OBJS)
$(CC) $(LDFLAGS) -o hostapd $(OBJS) $(LIBS)
@@ -776,6 +787,12 @@ HOBJS += ../src/crypto/aes-internal.o
@@ -777,6 +788,12 @@ HOBJS += ../src/crypto/aes-internal.o
HOBJS += ../src/crypto/aes-internal-enc.o
endif
@@ -86,7 +86,7 @@
endif
ifdef NEED_RSN_AUTHENTICATOR
@@ -1261,6 +1272,12 @@ BCHECK=../src/drivers/build.wpa_supplica
@@ -1262,6 +1273,12 @@ BCHECK=../src/drivers/build.wpa_supplica
wpa_priv: $(BCHECK) $(OBJS_priv)
$(LDO) $(LDFLAGS) -o wpa_priv $(OBJS_priv) $(LIBS)
@@ -99,7 +99,7 @@
wpa_supplicant: .config $(BCHECK) $(OBJS) $(EXTRA_progs)
$(LDO) $(LDFLAGS) -o wpa_supplicant $(OBJS) $(LIBS) $(EXTRALIBS)
@@ -1320,6 +1337,12 @@ endif
@@ -1321,6 +1338,12 @@ endif
$(Q)$(CC) -c -o $@ $(CFLAGS) $<
@$(E) " CC " $<
@@ -114,7 +114,7 @@
wpa_cli.exe: wpa_cli
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
@@ -2413,8 +2413,8 @@ union wpa_event_data {
@@ -2449,8 +2449,8 @@ union wpa_event_data {
* Driver wrapper code should call this function whenever an event is received
* from the driver.
*/
@@ -127,7 +127,7 @@
/*
--- a/src/ap/drv_callbacks.c
+++ b/src/ap/drv_callbacks.c
@@ -337,8 +337,8 @@ static void hostapd_event_eapol_rx(struc
@@ -375,8 +375,8 @@ static void hostapd_event_eapol_rx(struc
}
@@ -138,7 +138,7 @@
{
struct hostapd_data *hapd = ctx;
@@ -415,5 +415,6 @@ void wpa_supplicant_event(void *ctx, enu
@@ -453,5 +453,6 @@ void wpa_supplicant_event(void *ctx, enu
break;
}
}
@@ -169,8 +169,8 @@
for (;;) {
--- a/wpa_supplicant/events.c
+++ b/wpa_supplicant/events.c
@@ -1506,8 +1506,8 @@ static void wpa_supplicant_event_ibss_rs
#endif /* CONFIG_IBSS_RSN */
@@ -1577,8 +1577,8 @@ static void ft_rx_action(struct wpa_supp
#endif /* CONFIG_IEEE80211R */
-void wpa_supplicant_event(void *ctx, enum wpa_event_type event,
@@ -179,10 +179,10 @@
+ union wpa_event_data *data)
{
struct wpa_supplicant *wpa_s = ctx;
u16 reason_code = 0;
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
@@ -2215,6 +2215,9 @@ struct wpa_supplicant * wpa_supplicant_g
@@ -2223,6 +2223,9 @@ struct wpa_supplicant * wpa_supplicant_g
return NULL;
}
@@ -192,7 +192,7 @@
/**
* wpa_supplicant_init - Initialize %wpa_supplicant
@@ -2233,6 +2236,7 @@ struct wpa_global * wpa_supplicant_init(
@@ -2241,6 +2244,7 @@ struct wpa_global * wpa_supplicant_init(
if (params == NULL)
return NULL;
@@ -202,7 +202,7 @@
wpa_debug_open_syslog();
--- a/hostapd/main.c
+++ b/hostapd/main.c
@@ -478,6 +478,9 @@ static void usage(void)
@@ -479,6 +479,9 @@ static void usage(void)
exit(1);
}
@@ -212,7 +212,7 @@
int main(int argc, char *argv[])
{
@@ -489,6 +492,7 @@ int main(int argc, char *argv[])
@@ -490,6 +493,7 @@ int main(int argc, char *argv[])
if (os_program_init())
return -1;

View File

@@ -8,7 +8,7 @@
size_t max_ssids;
enum wpa_states prev_state;
@@ -310,6 +311,16 @@ static void wpa_supplicant_scan(void *el
@@ -311,6 +312,16 @@ static void wpa_supplicant_scan(void *el
wpa_s->wpa_state == WPA_INACTIVE)
wpa_supplicant_set_state(wpa_s, WPA_SCANNING);
@@ -25,7 +25,7 @@
/* Find the starting point from which to continue scanning */
ssid = wpa_s->conf->ssid;
if (wpa_s->prev_scan_ssid != WILDCARD_SSID_SCAN) {
@@ -371,6 +382,9 @@ static void wpa_supplicant_scan(void *el
@@ -374,6 +385,9 @@ static void wpa_supplicant_scan(void *el
int_array_sort_unique(params.freqs);
}

View File

@@ -1,11 +1,11 @@
--- a/wpa_supplicant/events.c
+++ b/wpa_supplicant/events.c
@@ -924,7 +924,7 @@ static void wpa_supplicant_event_scan_re
@@ -958,7 +958,7 @@ static void wpa_supplicant_event_scan_re
wpa_printf(MSG_DEBUG, "Setup a new network");
wpa_supplicant_associate(wpa_s, NULL, ssid);
} else
- wpa_supplicant_req_new_scan(wpa_s, 5);
+ wpa_supplicant_req_new_scan(wpa_s, 0);
}
}
#endif /* CONFIG_NO_SCAN_PROCESSING */
} else {
- int timeout_sec = 5;
+ int timeout_sec = 0;
int timeout_usec = 0;
wpa_supplicant_req_new_scan(wpa_s, timeout_sec,
timeout_usec);

View File

@@ -1,6 +1,6 @@
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -4435,9 +4435,11 @@ static int i802_set_wds_sta(void *priv,
@@ -4576,9 +4576,11 @@ static int i802_set_wds_sta(void *priv,
wpa_printf(MSG_DEBUG, "nl80211: Set WDS STA addr=" MACSTR
" aid=%d val=%d name=%s", MAC2STR(addr), aid, val, name);
if (val) {
@@ -16,7 +16,7 @@
} else {
--- a/src/ap/ieee802_11.c
+++ b/src/ap/ieee802_11.c
@@ -1559,6 +1559,9 @@ static void handle_assoc_cb(struct hosta
@@ -1614,6 +1614,9 @@ static void handle_assoc_cb(struct hosta
"Could not add STA to kernel driver");
}

View File

@@ -21,7 +21,7 @@
/* clear to get error below if setting is invalid */
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -4425,7 +4425,8 @@ static int i802_set_sta_vlan(void *priv,
@@ -4566,7 +4566,8 @@ static int i802_set_sta_vlan(void *priv,
}
@@ -31,7 +31,7 @@
{
struct i802_bss *bss = priv;
struct wpa_driver_nl80211_data *drv = bss->drv;
@@ -4439,6 +4440,10 @@ static int i802_set_wds_sta(void *priv,
@@ -4580,6 +4581,10 @@ static int i802_set_wds_sta(void *priv,
if (nl80211_create_iface(drv, name, NL80211_IFTYPE_AP_VLAN,
NULL, 1) < 0)
return -1;
@@ -44,7 +44,7 @@
return i802_set_sta_vlan(priv, addr, name, 0);
--- a/src/ap/ap_drv_ops.c
+++ b/src/ap/ap_drv_ops.c
@@ -253,9 +253,15 @@ static int hostapd_vlan_if_remove(struct
@@ -265,9 +265,15 @@ static int hostapd_vlan_if_remove(struct
static int hostapd_set_wds_sta(struct hostapd_data *hapd, const u8 *addr,
int aid, int val)
{
@@ -63,7 +63,7 @@
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
@@ -1610,7 +1610,8 @@ struct wpa_driver_ops {
@@ -1622,7 +1622,8 @@ struct wpa_driver_ops {
* @val: 1 = bind to 4-address WDS; 0 = unbind
* Returns: 0 on success, -1 on failure
*/

View File

@@ -1,6 +1,6 @@
--- a/src/ap/hostapd.c
+++ b/src/ap/hostapd.c
@@ -707,6 +707,16 @@ int hostapd_setup_interface_complete(str
@@ -715,6 +715,16 @@ int hostapd_setup_interface_complete(str
}
}

View File

@@ -0,0 +1,108 @@
--- a/hostapd/config_file.c
+++ b/hostapd/config_file.c
@@ -1266,6 +1266,8 @@ struct hostapd_config * hostapd_config_r
}
} else if (os_strcmp(buf, "wds_sta") == 0) {
bss->wds_sta = atoi(pos);
+ } else if (os_strcmp(buf, "ap_isolate") == 0) {
+ bss->isolate = atoi(pos);
} else if (os_strcmp(buf, "ap_max_inactivity") == 0) {
bss->ap_max_inactivity = atoi(pos);
} else if (os_strcmp(buf, "country_code") == 0) {
--- a/src/ap/ap_config.h
+++ b/src/ap/ap_config.h
@@ -199,6 +199,7 @@ struct hostapd_bss_config {
struct mac_acl_entry *deny_mac;
int num_deny_mac;
int wds_sta;
+ int isolate;
int auth_algs; /* bitfield of allowed IEEE 802.11 authentication
* algorithms, WPA_AUTH_ALG_{OPEN,SHARED,LEAP} */
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
@@ -1626,6 +1626,14 @@ struct wpa_driver_ops {
const char *bridge_ifname);
/**
+ * set_ap_isolate - Enable/disable AP isolation
+ * @priv: private driver interface data
+ * @val: 1 = enabled; 0 = disabled
+ * Returns: 0 on success, -1 on failure
+ */
+ int (*set_ap_isolate)(void *priv, int val);
+
+ /**
* send_action - Transmit an Action frame
* @priv: Private driver interface data
* @freq: Frequency (in MHz) of the channel
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -4263,6 +4263,29 @@ static int i802_set_rate_sets(void *priv
return -ENOBUFS;
}
+static int i802_set_ap_isolate(void *priv, int val)
+{
+ struct i802_bss *bss = priv;
+ struct wpa_driver_nl80211_data *drv = bss->drv;
+ struct nl_msg *msg;
+ int i;
+
+ msg = nlmsg_alloc();
+ if (!msg)
+ return -ENOMEM;
+
+ genlmsg_put(msg, 0, 0, genl_family_get_id(drv->nl80211), 0, 0,
+ NL80211_CMD_SET_BSS, 0);
+
+ NLA_PUT_U8(msg, NL80211_ATTR_AP_ISOLATE, !!val);
+
+ NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, if_nametoindex(bss->ifname));
+
+ return send_and_recv_msgs(drv, msg, NULL, NULL);
+ nla_put_failure:
+ return -ENOBUFS;
+}
+
#endif /* HOSTAPD */
@@ -5372,6 +5395,7 @@ const struct wpa_driver_ops wpa_driver_n
.set_tx_queue_params = i802_set_tx_queue_params,
.set_sta_vlan = i802_set_sta_vlan,
.set_wds_sta = i802_set_wds_sta,
+ .set_ap_isolate = i802_set_ap_isolate,
#endif /* HOSTAPD */
.set_freq = i802_set_freq,
.send_action = wpa_driver_nl80211_send_action,
--- a/src/ap/ap_drv_ops.c
+++ b/src/ap/ap_drv_ops.c
@@ -180,6 +180,14 @@ static int hostapd_set_radius_acl_expire
}
+static int hostapd_set_ap_isolate(struct hostapd_data *hapd, int value)
+{
+ if (hapd->driver == NULL || hapd->driver->set_ap_isolate == NULL)
+ return 0;
+ hapd->driver->set_ap_isolate(hapd->drv_priv, value);
+}
+
+
static int hostapd_set_bss_params(struct hostapd_data *hapd,
int use_protection)
{
@@ -229,6 +237,12 @@ static int hostapd_set_bss_params(struct
"driver");
ret = -1;
}
+ if (hostapd_set_ap_isolate(hapd, hapd->conf->isolate) &&
+ !hapd->conf->isolate) {
+ wpa_printf(MSG_ERROR, "Could not enable AP isolation in "
+ "kernel driver");
+ ret = -1;
+ }
return ret;
}

View File

@@ -0,0 +1,109 @@
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -1119,7 +1119,6 @@ nla_put_failure:
}
-#ifndef HOSTAPD
struct wiphy_info_data {
int max_scan_ssids;
int ap_supported;
@@ -1231,7 +1230,6 @@ static int wpa_driver_nl80211_capa(struc
return 0;
}
-#endif /* HOSTAPD */
static int wpa_driver_nl80211_init_nl(struct wpa_driver_nl80211_data *drv,
@@ -1371,6 +1369,7 @@ static void * wpa_driver_nl80211_init(vo
drv->monitor_ifidx = -1;
drv->monitor_sock = -1;
drv->ioctl_sock = -1;
+ drv->nlmode = NL80211_IFTYPE_STATION;
if (wpa_driver_nl80211_init_nl(drv, ctx)) {
os_free(drv);
@@ -1468,24 +1467,23 @@ wpa_driver_nl80211_finish_drv_init(struc
drv->ifindex = if_nametoindex(bss->ifname);
drv->first_bss.ifindex = drv->ifindex;
-#ifndef HOSTAPD
- if (wpa_driver_nl80211_set_mode(bss, IEEE80211_MODE_INFRA) < 0) {
- wpa_printf(MSG_DEBUG, "nl80211: Could not configure driver to "
- "use managed mode");
- }
-
- if (linux_set_iface_flags(drv->ioctl_sock, bss->ifname, 1)) {
- wpa_printf(MSG_ERROR, "Could not set interface '%s' UP",
- bss->ifname);
- return -1;
- }
+ if (drv->nlmode == NL80211_IFTYPE_STATION) {
+ if (wpa_driver_nl80211_set_mode(bss, IEEE80211_MODE_INFRA) < 0)
+ wpa_printf(MSG_DEBUG, "nl80211: Could not configure "
+ "driver to use managed mode");
+
+ if (linux_set_iface_flags(drv->ioctl_sock, bss->ifname, 1)) {
+ wpa_printf(MSG_ERROR, "Could not set interface '%s' UP",
+ bss->ifname);
+ return -1;
+ }
- if (wpa_driver_nl80211_capa(drv))
- return -1;
+ if (wpa_driver_nl80211_capa(drv))
+ return -1;
- netlink_send_oper_ifla(drv->netlink, drv->ifindex,
- 1, IF_OPER_DORMANT);
-#endif /* HOSTAPD */
+ netlink_send_oper_ifla(drv->netlink, drv->ifindex,
+ 1, IF_OPER_DORMANT);
+ }
if (nl80211_register_action_frames(drv) < 0) {
wpa_printf(MSG_DEBUG, "nl80211: Failed to register Action "
@@ -2143,13 +2141,9 @@ static int wpa_driver_nl80211_set_key(co
*/
if (ret || !set_tx || alg == WPA_ALG_NONE)
return ret;
-#ifdef HOSTAPD
- if (addr)
- return ret;
-#else /* HOSTAPD */
+
if (drv->nlmode == NL80211_IFTYPE_AP && addr)
return ret;
-#endif /* HOSTAPD */
msg = nlmsg_alloc();
if (!msg)
@@ -2990,7 +2984,8 @@ static void nl80211_remove_iface(struct
#ifdef HOSTAPD
/* stop listening for EAPOL on this interface */
- del_ifidx(drv, ifidx);
+ if (drv->nlmode == NL80211_IFTYPE_AP)
+ del_ifidx(drv, ifidx);
#endif /* HOSTAPD */
msg = nlmsg_alloc();
@@ -3063,7 +3058,8 @@ static int nl80211_create_iface_once(str
#ifdef HOSTAPD
/* start listening for EAPOL on this interface */
- add_ifidx(drv, ifidx);
+ if (drv->nlmode == NL80211_IFTYPE_AP)
+ add_ifidx(drv, ifidx);
#endif /* HOSTAPD */
if (addr && iftype != NL80211_IFTYPE_MONITOR &&
@@ -4766,6 +4762,7 @@ static void *i802_init(struct hostapd_da
return NULL;
drv = bss->drv;
+ drv->nlmode = NL80211_IFTYPE_AP;
if (linux_br_get(brname, params->ifname) == 0) {
wpa_printf(MSG_DEBUG, "nl80211: Interface %s is in bridge %s",
params->ifname, brname);

View File

@@ -0,0 +1,19 @@
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
@@ -543,10 +543,16 @@ void wpa_supplicant_set_state(struct wpa
wpa_s->reassociated_connection = 1;
wpa_drv_set_operstate(wpa_s, 1);
wpa_s->after_wps = 0;
+#ifndef IEEE8021X_EAPOL
+ wpa_drv_set_supp_port(wpa_s, 1);
+#endif
} else if (state == WPA_DISCONNECTED || state == WPA_ASSOCIATING ||
state == WPA_ASSOCIATED) {
wpa_s->new_connection = 1;
wpa_drv_set_operstate(wpa_s, 0);
+#ifndef IEEE8021X_EAPOL
+ wpa_drv_set_supp_port(wpa_s, 0);
+#endif
}
wpa_s->wpa_state = state;

View File

@@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
PKG_NAME:=hotplug2
PKG_REV:=201
PKG_VERSION:=$(PKG_REV)
PKG_RELEASE:=1
PKG_RELEASE:=2
PKG_SOURCE_PROTO:=svn
PKG_SOURCE_VERSION:=$(PKG_REV)

View File

@@ -601,7 +601,7 @@ $(eval $(call KernelPackage,sched))
define KernelPackage/ax25
SUBMENU:=$(NETWORK_SUPPORT_MENU)
TITLE:=AX25 support
DEPENDS:= +kmod-crc16
DEPENDS:= +!(LINUX_2_4||TARGET_xburst):kmod-crc16
KCONFIG:= \
CONFIG_AX25 \
CONFIG_MKISS

View File

@@ -62,6 +62,7 @@ $(eval $(call KernelPackage,crc7))
define KernelPackage/crc16
SUBMENU:=$(OTHER_MENU)
TITLE:=CRC16 support
DEPENDS:=@!(LINUX_2_4||TARGET_xburst)
KCONFIG:=CONFIG_CRC16
FILES:=$(LINUX_DIR)/lib/crc16.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,20,crc16,1)
@@ -105,8 +106,22 @@ define KernelPackage/lp
AUTOLOAD:=$(call AutoLoad,50,parport lp)
endef
define KernelPackage/lp/2.4
FILES:= \
$(LINUX_DIR)/drivers/parport/parport.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/parport/parport_*.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/char/lp.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/char/ppdev.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50, \
parport \
parport_splink \
lp \
)
endef
$(eval $(call KernelPackage,lp))
define KernelPackage/pcspkr
SUBMENU:=$(OTHER_MENU)
TITLE:=PC speaker support
@@ -261,7 +276,7 @@ $(eval $(call KernelPackage,ssb))
define KernelPackage/bluetooth
SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth support
DEPENDS:=@USB_SUPPORT +kmod-crc16 +kmod-usb-core +!TARGET_x86:kmod-hid \
DEPENDS:=@USB_SUPPORT +!(LINUX_2_4||TARGET_xburst):kmod-crc16 +kmod-usb-core +!TARGET_x86:kmod-hid \
+(TARGET_x86||TARGET_s3c24xx||TARGET_brcm47xx||TARGET_ar71xx):kmod-rfkill
KCONFIG:= \
CONFIG_BLUEZ \
@@ -652,8 +667,16 @@ $(eval $(call KernelPackage,sc520-wdt))
define KernelPackage/input-core
SUBMENU:=$(OTHER_MENU)
TITLE:=Input device core
DEPENDS:=@LINUX_2_6 @!TARGET_x86
DEPENDS:=@!TARGET_x86
KCONFIG:=CONFIG_INPUT
endef
define KernelPackage/input-core/2.4
FILES:=$(LINUX_DIR)/drivers/input/input.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,19,input)
endef
define KernelPackage/input-core/2.6
FILES:=$(LINUX_DIR)/drivers/input/input-core.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,19,input-core)
endef

View File

@@ -10,12 +10,12 @@ include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=mac80211
PKG_VERSION:=2010-03-24
PKG_RELEASE:=5
PKG_VERSION:=2010-04-28
PKG_RELEASE:=1
PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources
# http://www.orbit-lab.org/kernel/compat-wireless-2.6/2010/11 \
# http://wireless.kernel.org/download/compat-wireless-2.6
PKG_MD5SUM:=73357c52b5d6888ea3228b2ca8aa5eca
PKG_MD5SUM:=4b8c23ac7f33af7556034635af744c67
PKG_SOURCE:=compat-wireless-$(PKG_VERSION).tar.bz2
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION)
@@ -425,6 +425,7 @@ define KernelPackage/ath9k/config
config PACKAGE_ATH9K_USE_MINSTREL
bool "use the new minstrel_ht rate control for ath9k"
default y
endmenu
endef
@@ -531,6 +532,20 @@ define KernelPackage/net-ipw2200/description
- ipw2200
endef
define KernelPackage/mwl8k
$(call KernelPackage/mac80211/Default)
TITLE:=Driver for Marvell TOPDOG 802.11 Wireless cards
URL:=http://wireless.kernel.org/en/users/Drivers/mwl8k
DEPENDS+= @PCI_SUPPORT +kmod-mac80211
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mwl8k.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,27,mwl8k)
endef
define KernelPackage/mwl8k/description
Kernel modules for Marvell TOPDOG 802.11 Wireless cards
endef
#Broadcom firmware
ifneq ($(CONFIG_B43_EXPERIMENTAL),)
PKG_B43_FWV4_NAME:=broadcom-wl
@@ -852,7 +867,7 @@ MAKE_OPTS:= \
CONFIG_LIB80211_CRYPT_TKIP= \
CONFIG_IWLWIFI= \
CONFIG_IWLAGN= \
CONFIG_MWL8K= \
CONFIG_MWL8K=$(if $(CONFIG_PACKAGE_kmod-mwl8k),m) \
CONFIG_ATMEL= \
CONFIG_PCMCIA_ATMEL= \
CONFIG_ADM8211= \
@@ -1051,3 +1066,4 @@ $(eval $(call KernelPackage,b43legacy))
$(eval $(call KernelPackage,net-libipw))
$(eval $(call KernelPackage,net-ipw2100))
$(eval $(call KernelPackage,net-ipw2200))
$(eval $(call KernelPackage,mwl8k))

View File

@@ -416,6 +416,10 @@ detect_mac80211() {
[ "$(($ht_cap & 1))" -eq 1 ] && append ht_capab "$list LDPC" "$N"
[ "$(($ht_cap & 32))" -eq 32 ] && append ht_capab "$list SHORT-GI-20" "$N"
[ "$(($ht_cap & 64))" -eq 64 ] && append ht_capab "$list SHORT-GI-40" "$N"
[ "$(($ht_cap & 128))" -eq 128 ] && append ht_capab "$list TX-STBC" "$N"
[ "$(($ht_cap & 768))" -eq 256 ] && append ht_capab "$list RX-STBC1" "$N"
[ "$(($ht_cap & 768))" -eq 512 ] && append ht_capab "$list RX-STBC12" "$N"
[ "$(($ht_cap & 768))" -eq 768 ] && append ht_capab "$list RX-STBC123" "$N"
[ "$(($ht_cap & 4096))" -eq 4096 ] && append ht_capab "$list DSSS_CCK-40" "$N"
}
iw phy "$dev" info | grep -q '2412 MHz' || { mode_band="a"; channel="36"; }

View File

@@ -1,6 +1,6 @@
--- a/config.mk
+++ b/config.mk
@@ -269,8 +269,8 @@ endif
@@ -256,8 +256,8 @@ endif
CONFIG_P54_PCI=m

View File

@@ -9,7 +9,7 @@
ifeq ($(CONFIG_MAC80211),y)
$(error "ERROR: you have MAC80211 compiled into the kernel, CONFIG_MAC80211=y, as such you cannot replace its mac80211 driver. You need this set to CONFIG_MAC80211=m. If you are using Fedora upgrade your kernel as later version should this set as modular. For further information on Fedora see https://bugzilla.redhat.com/show_bug.cgi?id=470143. If you are using your own kernel recompile it and make mac80211 modular")
@@ -492,8 +492,8 @@ endif
@@ -481,8 +481,8 @@ endif
# We need the backported rfkill module on kernel < 2.6.31.
# In more recent kernel versions use the in kernel rfkill module.
ifdef CONFIG_COMPAT_KERNEL_31

View File

@@ -1,6 +1,6 @@
--- a/config.mk
+++ b/config.mk
@@ -299,10 +299,10 @@ endif
@@ -286,10 +286,10 @@ endif
CONFIG_MWL8K=m
# Ethernet drivers go here
@@ -15,7 +15,7 @@
CONFIG_HERMES=m
CONFIG_HERMES_CACHE_FW_ON_INIT=y
@@ -355,10 +355,10 @@ CONFIG_USB_NET_COMPAT_RNDIS_HOST=n
@@ -342,10 +342,10 @@ CONFIG_USB_NET_COMPAT_RNDIS_HOST=n
CONFIG_USB_NET_COMPAT_RNDIS_WLAN=n
CONFIG_USB_NET_COMPAT_CDCETHER=n
else

View File

@@ -9,7 +9,7 @@
CONFIG_SSB=m
else
include $(KLIB_BUILD)/.config
@@ -194,7 +194,7 @@ CONFIG_B43=m
@@ -181,7 +181,7 @@ CONFIG_B43=m
CONFIG_B43_HWRNG=y
CONFIG_B43_PCI_AUTOSELECT=y
ifneq ($(CONFIG_PCMCIA),)
@@ -18,7 +18,7 @@
endif
CONFIG_B43_LEDS=y
CONFIG_B43_PHY_LP=y
@@ -246,7 +246,7 @@ CONFIG_SSB_BLOCKIO=y
@@ -233,7 +233,7 @@ CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
ifneq ($(CONFIG_PCMCIA),)

View File

@@ -1,6 +1,6 @@
--- a/config.mk
+++ b/config.mk
@@ -407,8 +407,8 @@ endif # end of SPI driver list
@@ -396,8 +396,8 @@ endif # end of SPI driver list
ifneq ($(CONFIG_MMC),)

View File

@@ -1,6 +1,6 @@
--- a/config.mk
+++ b/config.mk
@@ -198,7 +198,7 @@ ifneq ($(CONFIG_PCMCIA),)
@@ -185,7 +185,7 @@ ifneq ($(CONFIG_PCMCIA),)
endif
CONFIG_B43_LEDS=y
CONFIG_B43_PHY_LP=y

View File

@@ -1,33 +0,0 @@
commit b7d48ccc687c44213121b1b565dccdc4488f5d9a
Author: Pavel Roskin <proski@gnu.org>
Date: Wed Mar 24 17:23:37 2010 -0400
compat: add compat-2.6.35.h and IW_HANDLER
Signed-off-by: Pavel Roskin <proski@gnu.org>
--- /dev/null
+++ b/include/linux/compat-2.6.35.h
@@ -0,0 +1,13 @@
+#ifndef LINUX_26_35_COMPAT_H
+#define LINUX_26_35_COMPAT_H
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35))
+
+#define IW_HANDLER(id, func) \
+ [IW_IOCTL_IDX(id)] = func
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35)) */
+
+#endif /* LINUX_26_35_COMPAT_H */
--- a/include/linux/compat-2.6.h
+++ b/include/linux/compat-2.6.h
@@ -27,5 +27,6 @@
#include <linux/compat-2.6.32.h>
#include <linux/compat-2.6.33.h>
#include <linux/compat-2.6.34.h>
+#include <linux/compat-2.6.35.h>
#endif /* LINUX_26_COMPAT_H */

View File

@@ -1,6 +1,6 @@
--- a/config.mk
+++ b/config.mk
@@ -276,12 +276,12 @@ CONFIG_RTL8180=m
@@ -248,12 +248,12 @@ CONFIG_RTL8180=m
CONFIG_ADM8211=m
@@ -15,7 +15,7 @@
# CONFIG_RT2800PCI_RT30XX=y
# CONFIG_RT2800PCI_RT35XX=y
# CONFIG_RT2800PCI_SOC=y
@@ -381,7 +381,7 @@ CONFIG_RT2800USB=m
@@ -355,7 +355,7 @@ CONFIG_RT2800USB=m
# CONFIG_RT2800USB_RT35XX=y
# CONFIG_RT2800USB_UNKNOWN=y
endif

View File

@@ -1,8 +1,8 @@
--- a/include/linux/compat-2.6.34.h
+++ b/include/linux/compat-2.6.34.h
@@ -164,6 +164,8 @@ static inline void device_unlock(struct
#define rcu_dereference_check(p, c) rcu_dereference(p)
@@ -197,6 +197,8 @@ do { \
*/
#define sysfs_bin_attr_init(bin_attr) sysfs_attr_init(&(bin_attr)->attr)
+#define rcu_dereference_check(p, c) rcu_dereference(p)
+

View File

@@ -1,8 +1,8 @@
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -1,6 +1,8 @@
#ifndef _COMPAT_LINUX_TRACEPOINT_H
#define _COMPAT_LINUX_TRACEPOINT_H 1
@@ -3,6 +3,8 @@
#include <linux/version.h>
+#include <linux/version.h>
+

View File

@@ -1,45 +0,0 @@
From 181ce6f71d907f42ab73376ce154015a835a6d8a Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Mon, 29 Mar 2010 11:00:20 -0700
Subject: [PATCH] mac80211: Handle mesh action frames in ieee80211_rx_h_action
This fixes the problem introduced in commit
8404080568613d93ad7cf0a16dfb68 which broke mesh peer link establishment.
changes:
v2 Added missing break (Johannes)
v3 Broke original patch into two (Johannes)
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
net/mac80211/mesh.c | 3 ---
net/mac80211/rx.c | 5 +++++
2 files changed, 5 insertions(+), 3 deletions(-)
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -749,9 +749,6 @@ ieee80211_mesh_rx_mgmt(struct ieee80211_
switch (fc & IEEE80211_FCTL_STYPE) {
case IEEE80211_STYPE_ACTION:
- if (skb->len < IEEE80211_MIN_ACTION_SIZE)
- return RX_DROP_MONITOR;
- /* fall through */
case IEEE80211_STYPE_PROBE_RESP:
case IEEE80211_STYPE_BEACON:
skb_queue_tail(&ifmsh->skb_queue, skb);
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1964,6 +1964,11 @@ ieee80211_rx_h_action(struct ieee80211_r
goto handled;
}
break;
+ case MESH_PLINK_CATEGORY:
+ case MESH_PATH_SEL_CATEGORY:
+ if (ieee80211_vif_is_mesh(&sdata->vif))
+ return ieee80211_mesh_rx_mgmt(sdata, rx->skb);
+ break;
}
/*

View File

@@ -1,14 +1,14 @@
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -15,6 +15,7 @@
*/
@@ -16,6 +16,7 @@
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/etherdevice.h>
#include <asm/unaligned.h>
#include "hw.h"
@@ -441,8 +442,16 @@ static int ath9k_hw_init_macaddr(struct
@@ -456,8 +457,16 @@ static int ath9k_hw_init_macaddr(struct
common->macaddr[2 * i] = eeval >> 8;
common->macaddr[2 * i + 1] = eeval & 0xff;
}

View File

@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -19,6 +19,9 @@
@@ -18,6 +18,9 @@
#include <net/cfg80211.h>
#include <net/mac80211.h>
#include "regd.h"

View File

@@ -8,7 +8,7 @@
#include "ath9k.h"
static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = {
@@ -52,21 +53,36 @@ static void ath_pci_read_cachesize(struc
@@ -53,21 +54,36 @@ static void ath_pci_read_cachesize(struc
static bool ath_pci_eeprom_read(struct ath_common *common, u32 off, u16 *data)
{

View File

@@ -1,17 +1,3 @@
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -385,11 +385,8 @@ static void ath9k_hw_init_defaults(struc
ah->hw_version.magic = AR5416_MAGIC;
ah->hw_version.subvendorid = 0;
- ah->ah_flags = 0;
if (ah->hw_version.devid == AR5416_AR9100_DEVID)
ah->hw_version.macVersion = AR_SREV_VERSION_9100;
- if (!AR_SREV_9100(ah))
- ah->ah_flags = AH_USE_EEPROM;
ah->atim_window = 0;
ah->sta_id1_defaults = AR_STA_ID1_CRPT_MIC_ENABLE;
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -15,6 +15,7 @@
@@ -24,7 +10,7 @@
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -531,6 +531,7 @@ static int ath9k_init_softc(u16 devid, s
@@ -565,6 +565,7 @@ static int ath9k_init_softc(u16 devid, s
{
struct ath_hw *ah = NULL;
struct ath_common *common;
@@ -32,7 +18,7 @@
int ret = 0, i;
int csz = 0;
@@ -542,6 +543,10 @@ static int ath9k_init_softc(u16 devid, s
@@ -576,6 +577,10 @@ static int ath9k_init_softc(u16 devid, s
ah->hw_version.subsysid = subsysid;
sc->sc_ah = ah;
@@ -43,3 +29,16 @@
common = ath9k_hw_common(ah);
common->ops = &ath9k_common_ops;
common->bus_ops = bus_ops;
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -429,10 +429,6 @@ static void ath9k_hw_init_defaults(struc
ah->hw_version.magic = AR5416_MAGIC;
ah->hw_version.subvendorid = 0;
- ah->ah_flags = 0;
- if (!AR_SREV_9100(ah))
- ah->ah_flags = AH_USE_EEPROM;
-
ah->atim_window = 0;
ah->sta_id1_defaults = AR_STA_ID1_CRPT_MIC_ENABLE;
ah->beacon_interval = 100;

View File

@@ -1,17 +1,17 @@
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -16,8 +16,10 @@
@@ -17,8 +17,10 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/etherdevice.h>
+#include <linux/ath9k_platform.h>
#include <asm/unaligned.h>
+#include "ath9k.h"
#include "hw.h"
#include "hw-ops.h"
#include "rc.h"
#include "initvals.h"
@@ -428,17 +430,23 @@ static int ath9k_hw_rf_claim(struct ath_
@@ -441,18 +443,23 @@ static void ath9k_hw_init_defaults(struc
static int ath9k_hw_init_macaddr(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
@@ -20,10 +20,11 @@
u32 sum;
int i;
u16 eeval;
u32 EEP_MAC[] = { EEP_MAC_LSW, EEP_MAC_MID, EEP_MAC_MSW };
sum = 0;
- for (i = 0; i < 3; i++) {
- eeval = ah->eep_ops->get_eeprom(ah, AR_EEPROM_MAC(i));
- eeval = ah->eep_ops->get_eeprom(ah, EEP_MAC[i]);
- sum += eeval;
- common->macaddr[2 * i] = eeval >> 8;
- common->macaddr[2 * i + 1] = eeval & 0xff;
@@ -32,12 +33,11 @@
+ memcpy(common->macaddr, pdata->macaddr, ETH_ALEN);
+ else
+ for (i = 0; i < 3; i++) {
+ eeval = ah->eep_ops->get_eeprom(ah, AR_EEPROM_MAC(i));
+ eeval = ah->eep_ops->get_eeprom(ah, EEP_MAC[i]);
+ sum += eeval;
+ common->macaddr[2 * i] = eeval >> 8;
+ common->macaddr[2 * i + 1] = eeval & 0xff;
+ }
+
if (!is_valid_ether_addr(common->macaddr)) {
ath_print(common, ATH_DBG_EEPROM,
"eeprom contains invalid mac address: %pM\n",

View File

@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -2097,7 +2097,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
@@ -1380,7 +1380,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
if (ah->config.rx_intr_mitigation) {
REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_LAST, 500);
@@ -8,4 +8,4 @@
+ REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_FIRST, 500);
}
ath9k_hw_init_bb(ah, chan);
if (ah->config.tx_intr_mitigation) {

View File

@@ -1,14 +1,14 @@
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -14,6 +14,7 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
@@ -16,6 +16,7 @@
#include <linux/slab.h>
+#include "linux/ath9k_platform.h"
#include "ath9k.h"
static char *dev_info = "ath9k";
@@ -546,6 +547,8 @@ static int ath9k_init_softc(u16 devid, s
@@ -580,6 +581,8 @@ static int ath9k_init_softc(u16 devid, s
pdata = (struct ath9k_platform_data *) sc->dev->platform_data;
if (!pdata)
ah->ah_flags |= AH_USE_EEPROM;
@@ -17,7 +17,7 @@
common = ath9k_hw_common(ah);
common->ops = &ath9k_common_ops;
@@ -671,6 +674,24 @@ void ath9k_set_hw_capab(struct ath_softc
@@ -702,6 +705,24 @@ void ath9k_set_hw_capab(struct ath_softc
SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
}
@@ -42,7 +42,7 @@
int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
const struct ath_bus_ops *bus_ops)
{
@@ -689,6 +710,9 @@ int ath9k_init_device(u16 devid, struct
@@ -720,6 +741,9 @@ int ath9k_init_device(u16 devid, struct
common = ath9k_hw_common(ah);
ath9k_set_hw_capab(sc, hw);
@@ -54,15 +54,15 @@
ath9k_reg_notifier);
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -511,6 +511,8 @@ struct ath_softc {
struct ath_beacon_config cur_beacon_conf;
struct delayed_work tx_complete_work;
struct ath_btcoex btcoex;
+
+ unsigned long quirk_wndr3700:1;
};
@@ -517,6 +517,8 @@ struct ath_softc {
struct ath_wiphy {
int beacon_interval;
+ bool quirk_wndr3700;
+
#ifdef CONFIG_ATH9K_DEBUGFS
struct ath9k_debug debug;
#endif
--- a/include/linux/ath9k_platform.h
+++ b/include/linux/ath9k_platform.h
@@ -24,6 +24,8 @@
@@ -70,7 +70,7 @@
u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS];
u8 *macaddr;
+
+ unsigned long quirk_wndr3700:1;
+ bool quirk_wndr3700;
};
#endif /* _LINUX_ATH9K_PLATFORM_H */

View File

@@ -13,7 +13,7 @@
sc->sc_ah->led_pin = ATH_LED_PIN_DEF;
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -379,6 +379,7 @@ void ath9k_btcoex_timer_pause(struct ath
@@ -392,6 +392,7 @@ void ath9k_btcoex_timer_pause(struct ath
#define ATH_LED_PIN_DEF 1
#define ATH_LED_PIN_9287 8

View File

@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -77,6 +77,90 @@ static const struct file_operations fops
@@ -78,6 +78,90 @@ static const struct file_operations fops
#define DMA_BUF_LEN 1024
@@ -91,7 +91,7 @@
static ssize_t read_file_dma(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
@@ -719,6 +803,16 @@ int ath9k_init_debug(struct ath_hw *ah)
@@ -731,6 +815,16 @@ int ath9k_init_debug(struct ath_hw *ah)
goto err;
#endif
@@ -108,7 +108,7 @@
sc->debug.debugfs_dma = debugfs_create_file("dma", S_IRUSR,
sc->debug.debugfs_phy, sc, &fops_dma);
if (!sc->debug.debugfs_dma)
@@ -769,6 +863,8 @@ void ath9k_exit_debug(struct ath_hw *ah)
@@ -781,6 +875,8 @@ void ath9k_exit_debug(struct ath_hw *ah)
struct ath_common *common = ath9k_hw_common(ah);
struct ath_softc *sc = (struct ath_softc *) common->priv;
@@ -119,7 +119,7 @@
debugfs_remove(sc->debug.debugfs_wiphy);
--- a/drivers/net/wireless/ath/ath9k/debug.h
+++ b/drivers/net/wireless/ath/ath9k/debug.h
@@ -148,6 +148,8 @@ struct ath_stats {
@@ -152,6 +152,8 @@ struct ath_stats {
};
struct ath9k_debug {

View File

@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -783,6 +783,86 @@ static const struct file_operations fops
@@ -795,6 +795,86 @@ static const struct file_operations fops
.owner = THIS_MODULE
};
@@ -87,7 +87,7 @@
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
@@ -852,6 +932,17 @@ int ath9k_init_debug(struct ath_hw *ah)
@@ -864,6 +944,17 @@ int ath9k_init_debug(struct ath_hw *ah)
if (!sc->debug.debugfs_recv)
goto err;
@@ -105,7 +105,7 @@
return 0;
err:
ath9k_exit_debug(ah);
@@ -865,6 +956,8 @@ void ath9k_exit_debug(struct ath_hw *ah)
@@ -877,6 +968,8 @@ void ath9k_exit_debug(struct ath_hw *ah)
debugfs_remove(sc->debug.debugfs_tx_chainmask);
debugfs_remove(sc->debug.debugfs_rx_chainmask);
@@ -116,7 +116,7 @@
debugfs_remove(sc->debug.debugfs_wiphy);
--- a/drivers/net/wireless/ath/ath9k/debug.h
+++ b/drivers/net/wireless/ath/ath9k/debug.h
@@ -158,6 +158,9 @@ struct ath9k_debug {
@@ -162,6 +162,9 @@ struct ath9k_debug {
struct dentry *debugfs_wiphy;
struct dentry *debugfs_xmit;
struct dentry *debugfs_recv;

View File

@@ -20,7 +20,7 @@
}
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -886,6 +886,11 @@ static int nl80211_send_iface(struct sk_
@@ -887,6 +887,11 @@ static int nl80211_send_iface(struct sk_
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
NLA_PUT_STRING(msg, NL80211_ATTR_IFNAME, dev->name);
NLA_PUT_U32(msg, NL80211_ATTR_IFTYPE, dev->ieee80211_ptr->iftype);

View File

@@ -13,7 +13,7 @@
mac80211-$(CONFIG_MAC80211_RC_MINSTREL) += $(rc80211_minstrel-y)
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -714,6 +714,10 @@ static int __init ieee80211_init(void)
@@ -716,6 +716,10 @@ static int __init ieee80211_init(void)
if (ret)
return ret;
@@ -24,7 +24,7 @@
ret = rc80211_pid_init();
if (ret)
goto err_pid;
@@ -726,6 +730,8 @@ static int __init ieee80211_init(void)
@@ -728,6 +732,8 @@ static int __init ieee80211_init(void)
err_netdev:
rc80211_pid_exit();
err_pid:
@@ -33,7 +33,7 @@
rc80211_minstrel_exit();
return ret;
@@ -734,6 +740,7 @@ static int __init ieee80211_init(void)
@@ -736,6 +742,7 @@ static int __init ieee80211_init(void)
static void __exit ieee80211_exit(void)
{
rc80211_pid_exit();
@@ -68,7 +68,7 @@
--- /dev/null
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -0,0 +1,815 @@
@@ -0,0 +1,822 @@
+/*
+ * Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org>
+ *
@@ -389,9 +389,9 @@
+ if (!mg->supported)
+ continue;
+
+ if (++mg->index > MCS_GROUP_RATES) {
+ if (++mg->index >= MCS_GROUP_RATES) {
+ mg->index = 0;
+ if (++mg->column > ARRAY_SIZE(sample_table))
+ if (++mg->column >= ARRAY_SIZE(sample_table))
+ mg->column = 0;
+ }
+ break;
@@ -474,7 +474,7 @@
+ mi->ampdu_len += info->status.ampdu_len;
+
+ if (!mi->sample_wait && !mi->sample_tries && mi->sample_count > 0) {
+ mi->sample_wait = 4 + MINSTREL_TRUNC(mi->avg_ampdu_len);
+ mi->sample_wait = 4 + 2 * MINSTREL_TRUNC(mi->avg_ampdu_len);
+ mi->sample_tries = 3;
+ mi->sample_count--;
+ }
@@ -660,6 +660,7 @@
+ if (!msp->is_ht)
+ return mac80211_minstrel.get_rate(priv, sta, &msp->legacy, txrc);
+
+ info->flags |= mi->tx_flags;
+ sample_idx = minstrel_get_sample_rate(mp, mi);
+ if (sample_idx >= 0) {
+ minstrel_ht_set_rate(mp, mi, &ar[0], sample_idx,
@@ -733,6 +734,12 @@
+ }
+ mi->sample_tries = 4;
+
+ if (sta_cap & IEEE80211_HT_CAP_TX_STBC)
+ mi->tx_flags |= IEEE80211_TX_CTL_STBC;
+
+ if (sta_cap & IEEE80211_HT_CAP_LDPC_CODING)
+ mi->tx_flags |= IEEE80211_TX_CTL_LDPC;
+
+ if (oper_chan_type != NL80211_CHAN_HT40MINUS &&
+ oper_chan_type != NL80211_CHAN_HT40PLUS)
+ sta_cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
@@ -886,7 +893,7 @@
+}
--- /dev/null
+++ b/net/mac80211/rc80211_minstrel_ht.h
@@ -0,0 +1,125 @@
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org>
+ *
@@ -899,10 +906,10 @@
+#define __RC_MINSTREL_HT_H
+
+/*
+ * maximum number of spatial streams to make use of
+ * set this value to 3 once we have drivers that support it
+ * The number of streams can be changed to 2 to reduce code
+ * size and memory footprint.
+ */
+#define MINSTREL_MAX_STREAMS 2
+#define MINSTREL_MAX_STREAMS 3
+#define MINSTREL_STREAM_GROUPS 4
+
+/* scaled fraction values */
@@ -983,6 +990,9 @@
+ unsigned int total_packets;
+ unsigned int sample_packets;
+
+ /* tx flags to add for frames for this sta */
+ u32 tx_flags;
+
+ u8 sample_wait;
+ u8 sample_tries;
+ u8 sample_count;

View File

@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -655,7 +655,11 @@ void ath9k_set_hw_capab(struct ath_softc
@@ -686,7 +686,11 @@ void ath9k_set_hw_capab(struct ath_softc
hw->sta_data_size = sizeof(struct ath_node);
hw->vif_data_size = sizeof(struct ath_vif);

View File

@@ -1,59 +0,0 @@
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1911,6 +1911,34 @@ static void ath9k_enable_rfkill(struct a
REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB);
}
+bool ath9k_hw_check_alive(struct ath_hw *ah)
+{
+ int count = 50;
+ u32 reg;
+
+ if (AR_SREV_9285_10_OR_LATER(ah))
+ return true;
+
+ do {
+ reg = REG_READ(ah, AR_OBS_BUS_1);
+
+ if ((reg & 0x7E7FFFEF) == 0x00702400)
+ continue;
+
+ switch (reg & 0x7E000B00) {
+ case 0x1E000000:
+ case 0x52000B00:
+ case 0x18000B00:
+ continue;
+ default:
+ return true;
+ }
+ } while (count-- > 0);
+
+ return false;
+}
+EXPORT_SYMBOL(ath9k_hw_check_alive);
+
int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
bool bChannelChange)
{
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -679,6 +679,7 @@ void ath9k_hw_set11nmac2040(struct ath_h
void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period);
void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah,
const struct ath9k_beacon_state *bs);
+bool ath9k_hw_check_alive(struct ath_hw *ah);
bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode);
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -405,7 +405,8 @@ void ath9k_tasklet(unsigned long data)
ath9k_ps_wakeup(sc);
- if (status & ATH9K_INT_FATAL) {
+ if ((status & ATH9K_INT_FATAL) ||
+ !ath9k_hw_check_alive(ah)) {
ath_reset(sc, false);
ath9k_ps_restore(sc);
return;

View File

@@ -0,0 +1,24 @@
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -57,13 +57,19 @@ static bool ath9k_rx_accept(struct ath_c
* rs_more indicates chained descriptors which can be used
* to link buffers together for a sort of scatter-gather
* operation.
- *
+ * reject the frame, we don't support scatter-gather yet and
+ * the frame is probably corrupt anyway
+ */
+ if (rx_stats->rs_more)
+ return false;
+
+ /*
* The rx_stats->rs_status will not be set until the end of the
* chained descriptors so it can be ignored if rs_more is set. The
* rs_more will be false at the last element of the chained
* descriptors.
*/
- if (!rx_stats->rs_more && rx_stats->rs_status != 0) {
+ if (rx_stats->rs_status != 0) {
if (rx_stats->rs_status & ATH9K_RXERR_CRC)
rxs->flag |= RX_FLAG_FAILED_FCS_CRC;
if (rx_stats->rs_status & ATH9K_RXERR_PHY)

View File

@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -223,6 +223,7 @@ void rt2x00pci_uninitialize(struct rt2x0
@@ -225,6 +225,7 @@ void rt2x00pci_uninitialize(struct rt2x0
}
EXPORT_SYMBOL_GPL(rt2x00pci_uninitialize);
@@ -8,7 +8,7 @@
/*
* PCI driver handlers.
*/
@@ -397,6 +398,7 @@ int rt2x00pci_resume(struct pci_dev *pci
@@ -399,6 +400,7 @@ int rt2x00pci_resume(struct pci_dev *pci
}
EXPORT_SYMBOL_GPL(rt2x00pci_resume);
#endif /* CONFIG_PM */

View File

@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -213,7 +213,7 @@ void rt2x00pci_uninitialize(struct rt2x0
@@ -215,7 +215,7 @@ void rt2x00pci_uninitialize(struct rt2x0
/*
* Free irq line.
*/

View File

@@ -1,59 +1,29 @@
From f18d4463d092162f34a8bd226505627ceeac3e8a Mon Sep 17 00:00:00 2001
From: Luis Correia <luis.f.correia@gmail.com>
Date: Sat, 3 Apr 2010 12:49:53 +0100
Subject: [PATCH] rt2x00: remove MCU requests for SoC platforms
The ralink SoC platforms do not have an MCU.
Signed-off-by: Luis Correia <luis.f.correia@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800pci.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -221,9 +221,9 @@ void rt2800_mcu_request(struct rt2x00_de
u32 reg;
/*
- * SOC devices don't support MCU requests.
+ * some devices don't support MCU requests.
*/
- if (rt2x00_is_soc(rt2x00dev))
+ if (!test_bit(DRIVER_REQUIRE_MCU, &rt2x00dev->flags))
return;
mutex_lock(&rt2x00dev->csr_mutex);
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -60,6 +60,12 @@ static void rt2800pci_mcu_status(struct
unsigned int i;
u32 reg;
@@ -66,6 +66,12 @@ static void rt2800pci_mcu_status(struct
if (rt2x00_is_soc(rt2x00dev))
return;
+ /*
+ * some devices don't support MCU requests.
+ * SOC devices don't support MCU requests.
+ */
+ if (!test_bit(DRIVER_REQUIRE_MCU, &rt2x00dev->flags))
+ if (rt2x00_is_soc(rt2x00dev))
+ return;
+
for (i = 0; i < 200; i++) {
rt2800_register_read(rt2x00dev, H2M_MAILBOX_CID, &reg);
@@ -1098,10 +1104,12 @@ static int rt2800pci_probe_hw(struct rt2
__set_bit(DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL, &rt2x00dev->flags);
/*
- * This device requires firmware.
+ * This device requires firmware and MCU access.
*/
- if (!rt2x00_is_soc(rt2x00dev))
+ if (!rt2x00_is_soc(rt2x00dev)){
__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_MCU, &rt2x00dev->flags);
+ }
__set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
if (!modparam_nohwcrypt)
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -631,6 +631,7 @@ enum rt2x00_flags {
* Driver requirements
*/
DRIVER_REQUIRE_FIRMWARE,
+ DRIVER_REQUIRE_MCU,
DRIVER_REQUIRE_BEACON_GUARD,
DRIVER_REQUIRE_ATIM_QUEUE,
DRIVER_REQUIRE_DMA,

View File

@@ -0,0 +1,10 @@
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -3850,6 +3850,7 @@ MODULE_FIRMWARE("mwl8k/helper_8366.fw");
MODULE_FIRMWARE("mwl8k/fmimage_8366.fw");
static DEFINE_PCI_DEVICE_TABLE(mwl8k_pci_id_table) = {
+ { PCI_VDEVICE(MARVELL, 0x2a02), .driver_data = MWL8363, },
{ PCI_VDEVICE(MARVELL, 0x2a0a), .driver_data = MWL8363, },
{ PCI_VDEVICE(MARVELL, 0x2a0c), .driver_data = MWL8363, },
{ PCI_VDEVICE(MARVELL, 0x2a24), .driver_data = MWL8363, },

View File

@@ -35,8 +35,8 @@ endef
define Package/mountd/install
$(INSTALL_DIR) $(1)/sbin/ $(1)/etc/config/ $(1)/etc/init.d/
$(INSTALL_BIN) $(PKG_BUILD_DIR)/mountd $(1)/sbin/
$(INSTALL_BIN) ./files/mountd.config $(1)/etc/config/mountd
$(INSTALL_DATA) ./files/mountd.init $(1)/etc/init.d/mountd
$(INSTALL_DATA) ./files/mountd.config $(1)/etc/config/mountd
$(INSTALL_BIN) ./files/mountd.init $(1)/etc/init.d/mountd
endef
$(eval $(call BuildPackage,mountd))

View File

@@ -1,69 +0,0 @@
#
# Copyright (C) 2008 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
PKG_NAME:=ps3-utils
PKG_VERSION:=6488134e48cf2d6f2d6471ced8346ac8cb1b855a
PKG_RELEASE:=1
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
PKG_SOURCE_URL:=http://www.kernel.org/pub/scm/linux/kernel/git/geoff/ps3-utils.git
PKG_SOURCE_PROTO:=git
PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
PKG_SOURCE_VERSION:=$(PKG_VERSION)
PKG_FIXUP:=libtool
PKG_INSTALL=1
include $(INCLUDE_DIR)/package.mk
define Package/ps3-utils
SECTION:=utils
CATEGORY:=Utilities
TITLE:=PS3 Linux Utilities
URL:=http://kernel.org/pub/linux/kernel/people/geoff/cell/ps3-utils/
MAINTAINER:=Geoff Levand <geoffrey.levand@am.sony.com>
DEPENDS:=@TARGET_ps3||TARGET_ps3chk||TARGET_powerpc
endef
define Package/ps3-utils/description
The ps3-utils package is a set of system administration utilites for the
PS3 game console.
endef
define Build/Configure
(cd $(PKG_BUILD_DIR) && $(BASH) -x ./bootstrap)
$(call Build/Configure/Default)
endef
define Build/InstallDev
$(INSTALL_DIR) $(1)/usr/include
$(INSTALL_DATA) \
$(PKG_INSTALL_DIR)/usr/include/ps3*.h \
$(1)/usr/include
$(INSTALL_DIR) $(1)/usr/lib
$(INSTALL_BIN) \
$(PKG_INSTALL_DIR)/usr/lib/libps3-utils.{la,a,so*} \
$(1)/usr/lib/
endef
define Package/ps3-utils/install
$(INSTALL_DIR) $(1)/usr/sbin
$(INSTALL_DIR) $(1)/usr/bin
$(INSTALL_DIR) $(1)/usr/lib
$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/ps3-boot-game-os $(1)/usr/sbin
$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/ps3-dump-bootloader $(1)/usr/sbin
$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/ps3-flash-util $(1)/usr/sbin
$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/ps3-video-mode $(1)/usr/bin
$(CP) $(PKG_INSTALL_DIR)/usr/lib/libps3-utils.so.* $(1)/usr/lib
endef
$(eval $(call BuildPackage,ps3-utils))