brcm47xx: reorder patches like they were commitet upstream

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24162 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/brcm47xx/patches-2.6.37/010-MIPS-BCM47xx-Do-not-read-config-from-CFE.patch

@@ -0,0 +1,76 @@
+From 12b15e5d5914d174e3411d0f0b3fd55dc1b5e55a Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 27 Nov 2010 00:34:02 +0100
+Subject: [PATCH 1/6] MIPS: BCM47xx: Do not read config from CFE
+
+The config options read out here are not stored in CFE, but only in
+NVRAM on the devices. Remove reading from CFE and only access the NVRAM.
+Reading out CFE does not harm, but is useless here.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/setup.c |   28 +++++++++-------------------
+ 1 files changed, 9 insertions(+), 19 deletions(-)
+
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -32,7 +32,6 @@
+ #include <asm/reboot.h>
+ #include <asm/time.h>
+ #include <bcm47xx.h>
+-#include <asm/fw/cfe/cfe_api.h>
+ #include <asm/mach-bcm47xx/nvram.h>
+ 
+ struct ssb_bus ssb_bcm47xx;
+@@ -82,42 +81,33 @@ static int bcm47xx_get_invariants(struct
+ 	/* Fill boardinfo structure */
+ 	memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
+ 
+-	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
++	if (nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
+ 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
+-	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
++	if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
+ 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
+-	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
++	if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
+ 		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
+ 
+ 	/* Fill sprom structure */
+ 	memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
+ 	iv->sprom.revision = 3;
+ 
+-	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
++	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+ 		str2eaddr(buf, iv->sprom.et0mac);
+ 
+-	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
++	if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+ 		str2eaddr(buf, iv->sprom.et1mac);
+ 
+-	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
++	if (nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
+ 		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
+ 
+-	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
++	if (nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
+ 		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
+ 
+-	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
++	if (nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
+ 		iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
+ 
+-	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
++	if (nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
+ 		iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
+ 
+ 	return 0;

target/linux/brcm47xx/patches-2.6.37/011-MIPS-BCM47xx-Fill-values-for-b43-into-ssb-sprom.patch

@@ -1,30 +1,27 @@
-From e5c5828063a55a752e2392d820383dd7a5da3737 Mon Sep 17 00:00:00 2001
+From 4f95d9875b74bbf804a3a83f2c3c5e2068c3f857 Mon Sep 17 00:00:00 2001
 From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 18 Jul 2010 13:34:32 +0200
+Date: Sat, 27 Nov 2010 00:44:58 +0100
 Subject: [PATCH 2/6] MIPS: BCM47xx: Fill values for b43 into ssb sprom
 
-Most of the values are stored in the nvram and not in the CFE. At first
+Fill the sprom with all available values from the nvram. Most of these
-the nvram should be read and if there is no value it should look into
+new values are needed for the b43 or b43legacy driver.
-the CFE. Now more values are read out because the b43 and b43legacy
-drivers needs them.
 
 Some parts of this patch have been in OpenWRT for a long time and were
 made by Michael Buesch.
 
 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 ---
- arch/mips/bcm47xx/setup.c |  131 +++++++++++++++++++++++++++++++++-----------
+ arch/mips/bcm47xx/setup.c |  114 ++++++++++++++++++++++++++++++++++++---------
- 1 files changed, 98 insertions(+), 33 deletions(-)
+ 1 files changed, 92 insertions(+), 22 deletions(-)
 
 --- a/arch/mips/bcm47xx/setup.c
 +++ b/arch/mips/bcm47xx/setup.c
-@@ -74,6 +74,95 @@ static void str2eaddr(char *str, char *d
+@@ -73,42 +73,112 @@ static void str2eaddr(char *str, char *d
  	}
  }
  
 +#define READ_FROM_NVRAM(_outvar, name, buf) \
-+	if (nvram_getenv(name, buf, sizeof(buf)) >= 0 || \
++	if (nvram_getenv(name, buf, sizeof(buf)) >= 0)\
-+	    cfe_getenv(name, buf, sizeof(buf)) >= 0) \
 +		sprom->_outvar = simple_strtoul(buf, NULL, 0);
 +
 +static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
@@ -36,14 +33,11 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 +
 +	sprom->revision = 1; /* Fallback: Old hardware does not define this. */
 +	READ_FROM_NVRAM(revision, "sromrev", buf);
-+	if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0 ||
++	if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0)
-+	    cfe_getenv("il0macaddr", buf, sizeof(buf)) >= 0)
 +		str2eaddr(buf, sprom->il0mac);
-+	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
++	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
-+	    cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
 +		str2eaddr(buf, sprom->et0mac);
-+	if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
++	if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
-+	    cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
 +		str2eaddr(buf, sprom->et1mac);
 +	READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf);
 +	READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf);
@@ -95,75 +89,64 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 +	READ_FROM_NVRAM(ofdm5gpo, "ofdm5gpo", buf);
 +	READ_FROM_NVRAM(ofdm5ghpo, "ofdm5ghpo", buf);
 +
-+	if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0 ||
++	if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0) {
-+	    cfe_getenv("boardflags", buf, sizeof(buf)) >= 0)
 +		boardflags = simple_strtoul(buf, NULL, 0);
-+	if (boardflags) {
++		if (boardflags) {
-+		sprom->boardflags_lo = (boardflags & 0x0000FFFFU);
++			sprom->boardflags_lo = (boardflags & 0x0000FFFFU);
-+		sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16;
++			sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16;
++		}
 +	}
-+	if (nvram_getenv("boardflags2", buf, sizeof(buf)) >= 0 ||
++	if (nvram_getenv("boardflags2", buf, sizeof(buf)) >= 0) {
-+	    cfe_getenv("boardflags2", buf, sizeof(buf)) >= 0)
 +		boardflags = simple_strtoul(buf, NULL, 0);
-+	if (boardflags) {
++		if (boardflags) {
-+		sprom->boardflags2_lo = (boardflags & 0x0000FFFFU);
++			sprom->boardflags2_lo = (boardflags & 0x0000FFFFU);
-+		sprom->boardflags2_hi = (boardflags & 0xFFFF0000U) >> 16;
++			sprom->boardflags2_hi = (boardflags & 0xFFFF0000U) >> 16;
++		}
 +	}
 +}
 +
  static int bcm47xx_get_invariants(struct ssb_bus *bus,
  				   struct ssb_init_invariants *iv)
  {
-@@ -82,43 +171,19 @@ static int bcm47xx_get_invariants(struct
+-	char buf[100];
++	char buf[20];
+ 
  	/* Fill boardinfo structure */
  	memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
  
--	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
+ 	if (nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
--	    nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
-+	iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
-+	if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
-+	    cfe_getenv("boardtype", buf, sizeof(buf)) >= 0)
- 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
--	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
--	    nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
 -		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
--	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
++		iv->boardinfo.vendor = (u16)simple_strtoul(buf, NULL, 0);
--	    nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
++	else
-+	if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
++		iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
-+	    cfe_getenv("boardrev", buf, sizeof(buf)) >= 0)
+ 	if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
+ 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
+ 	if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
  		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
  
 -	/* Fill sprom structure */
 -	memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
 -	iv->sprom.revision = 3;
 -
--	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
+-	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
--	    nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
 -		str2eaddr(buf, iv->sprom.et0mac);
 -
--	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
+-	if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
--	    nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
 -		str2eaddr(buf, iv->sprom.et1mac);
 -
--	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
+-	if (nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
--	    nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
 -		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
 -
--	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
+-	if (nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
--	    nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
 -		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
 -
--	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
+-	if (nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
--	    nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
 -		iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
--
--	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
--	    nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
--		iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
 +	bcm47xx_fill_sprom(&iv->sprom);
-+
+ 
-+	if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0 ||
+-	if (nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
-+	    cfe_getenv("cardbus", buf, sizeof(buf)) >= 0)
+-		iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
++	if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
 +		iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
  
  	return 0;

target/linux/brcm47xx/patches-2.6.37/012-MIPS-BCM47xx-Use-sscanf-for-parsing-mac-address.patch

@@ -0,0 +1,76 @@
+From f52926174040418e26112cd0ba36afd8bb066928 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 27 Nov 2010 14:02:49 +0100
+Subject: [PATCH 3/6] MIPS: BCM47xx: Use sscanf for parsing mac address
+
+Instead of writing out own function for parsing the mac address we now
+use sscanf.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/setup.c                  |   23 +++--------------------
+ arch/mips/include/asm/mach-bcm47xx/nvram.h |    7 +++++++
+ 2 files changed, 10 insertions(+), 20 deletions(-)
+
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -56,23 +56,6 @@ static void bcm47xx_machine_halt(void)
+ 		cpu_relax();
+ }
+ 
+-static void str2eaddr(char *str, char *dest)
+-{
+-	int i = 0;
+-
+-	if (str == NULL) {
+-		memset(dest, 0, 6);
+-		return;
+-	}
+-
+-	for (;;) {
+-		dest[i++] = (char) simple_strtoul(str, NULL, 16);
+-		str += 2;
+-		if (!*str++ || i == 6)
+-			break;
+-	}
+-}
+-
+ #define READ_FROM_NVRAM(_outvar, name, buf) \
+ 	if (nvram_getenv(name, buf, sizeof(buf)) >= 0)\
+ 		sprom->_outvar = simple_strtoul(buf, NULL, 0);
+@@ -87,11 +70,11 @@ static void bcm47xx_fill_sprom(struct ss
+ 	sprom->revision = 1; /* Fallback: Old hardware does not define this. */
+ 	READ_FROM_NVRAM(revision, "sromrev", buf);
+ 	if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0)
+-		str2eaddr(buf, sprom->il0mac);
++		nvram_parse_macaddr(buf, sprom->il0mac);
+ 	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+-		str2eaddr(buf, sprom->et0mac);
++		nvram_parse_macaddr(buf, sprom->et0mac);
+ 	if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+-		str2eaddr(buf, sprom->et1mac);
++		nvram_parse_macaddr(buf, sprom->et1mac);
+ 	READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf);
+ 	READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf);
+ 	READ_FROM_NVRAM(et0mdcport, "et0mdcport", buf);
+--- a/arch/mips/include/asm/mach-bcm47xx/nvram.h
++++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h
+@@ -12,6 +12,7 @@
+ #define __NVRAM_H
+ 
+ #include <linux/types.h>
++#include <linux/kernel.h>
+ 
+ struct nvram_header {
+ 	u32 magic;
+@@ -36,4 +37,10 @@ struct nvram_header {
+ 
+ extern int nvram_getenv(char *name, char *val, size_t val_len);
+ 
++static inline void nvram_parse_macaddr(char *buf, u8 *macaddr)
++{
++	sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], &macaddr[1],
++	       &macaddr[2], &macaddr[3], &macaddr[4], &macaddr[5]);
++}
++
+ #endif

target/linux/brcm47xx/patches-2.6.37/013-MIPS-BCM47xx-Swap-serial-console-if-ttyS1-was-specif.patch

@@ -0,0 +1,45 @@
+From 25abc0cde3f4865910b380d68ffda0916b5870e7 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 27 Nov 2010 12:25:21 +0100
+Subject: [PATCH 4/6] MIPS: BCM47xx: Swap serial console if ttyS1 was specified.
+
+Some devices like the Netgear WGT634U are using ttyS1 for default
+console output. We should switch to that console if it was given in
+the kernel_args parameters.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/setup.c |   16 ++++++++++++++++
+ 1 files changed, 16 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -169,12 +169,28 @@ static int bcm47xx_get_invariants(struct
+ void __init plat_mem_setup(void)
+ {
+ 	int err;
++	char buf[100];
++	struct ssb_mipscore *mcore;
+ 
+ 	err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
+ 				      bcm47xx_get_invariants);
+ 	if (err)
+ 		panic("Failed to initialize SSB bus (err %d)\n", err);
+ 
++	mcore = &ssb_bcm47xx.mipscore;
++	if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
++		if (strstr(buf, "console=ttyS1")) {
++			struct ssb_serial_port port;
++
++			printk(KERN_DEBUG "Swapping serial ports!\n");
++			/* swap serial ports */
++			memcpy(&port, &mcore->serial_ports[0], sizeof(port));
++			memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1],
++			       sizeof(port));
++			memcpy(&mcore->serial_ports[1], &port, sizeof(port));
++		}
++	}
++
+ 	_machine_restart = bcm47xx_machine_restart;
+ 	_machine_halt = bcm47xx_machine_halt;
+ 	pm_power_off = bcm47xx_machine_halt;

target/linux/brcm47xx/patches-2.6.37/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch

@@ -24,35 +24,19 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  #include <asm/bootinfo.h>
  #include <asm/reboot.h>
  #include <asm/time.h>
-@@ -190,12 +192,47 @@ static int bcm47xx_get_invariants(struct
+@@ -168,7 +170,7 @@ static int bcm47xx_get_invariants(struct
  
  void __init plat_mem_setup(void)
  {
 -	int err;
 +	int i, err;
-+	char buf[100];
+ 	char buf[100];
-+	struct ssb_mipscore *mcore;
+ 	struct ssb_mipscore *mcore;
+ 
+@@ -191,6 +193,24 @@ void __init plat_mem_setup(void)
+ 		}
+ 	}
  
- 	err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
- 				      bcm47xx_get_invariants);
- 	if (err)
- 		panic("Failed to initialize SSB bus (err %d)\n", err);
-+	mcore = &ssb_bcm47xx.mipscore;
-+
-+	if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0 ||
-+	    cfe_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
-+		if (strstr(buf, "console=ttyS1")) {
-+			struct ssb_serial_port port;
-+
-+			printk(KERN_DEBUG "Swapping serial ports!\n");
-+			/* swap serial ports */
-+			memcpy(&port, &mcore->serial_ports[0], sizeof(port));
-+			memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1],
-+			       sizeof(port));
-+			memcpy(&mcore->serial_ports[1], &port, sizeof(port));
-+		}
-+	}
-+
 +	for (i = 0; i < mcore->nr_serial_ports; i++) {
 +		struct ssb_serial_port *port = &(mcore->serial_ports[i]);
 +		struct uart_port s;
@@ -70,6 +54,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 +		early_serial_setup(&s);
 +	}
 +	printk(KERN_DEBUG "Serial init done.\n");
- 
++
  	_machine_restart = bcm47xx_machine_restart;
  	_machine_halt = bcm47xx_machine_halt;
+ 	pm_power_off = bcm47xx_machine_halt;

target/linux/brcm47xx/patches-2.6.37/030-b44-fix-workarround-for-wap54g10.patch

@@ -0,0 +1,50 @@
+From 93f94103b9d239b15bba69f592bb6fb2ec5e363f Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 27 Nov 2010 13:14:14 +0100
+Subject: [PATCH 5/6] b44: fix workarround for wap54g10
+
+The code for the b44_wap54g10_workaround was never included, because
+the config option was wrong. The nvram_get function was never in
+mainline kernel, only in external OpenWrt patches.
+
+The code should be compiled in when CONFIG_BCM47XX is selected and not
+when CONFIG_SSB_DRIVER_MIPS is selected, because nvram_getenv is only
+available on bcm47xx platforms and now in the mainline kernel code.
+Using an include is better than a second function declaration, to fix
+this when the function signature changes.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/net/b44.c |   11 +++++------
+ 1 files changed, 5 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/b44.c
++++ b/drivers/net/b44.c
+@@ -381,11 +381,11 @@ static void b44_set_flow_ctrl(struct b44
+ 	__b44_set_flow_ctrl(bp, pause_enab);
+ }
+ 
+-#ifdef SSB_DRIVER_MIPS
+-extern char *nvram_get(char *name);
++#ifdef CONFIG_BCM47XX
++#include <asm/mach-bcm47xx/nvram.h>
+ static void b44_wap54g10_workaround(struct b44 *bp)
+ {
+-	const char *str;
++	char buf[20];
+ 	u32 val;
+ 	int err;
+ 
+@@ -394,10 +394,9 @@ static void b44_wap54g10_workaround(stru
+ 	 * see https://dev.openwrt.org/ticket/146
+ 	 * check and reset bit "isolate"
+ 	 */
+-	str = nvram_get("boardnum");
+-	if (!str)
++	if (nvram_getenv("boardnum", buf, sizeof(buf)) < 0)
+ 		return;
+-	if (simple_strtoul(str, NULL, 0) == 2) {
++	if (simple_strtoul(buf, NULL, 0) == 2) {
+ 		err = __b44_readphy(bp, 0, MII_BMCR, &val);
+ 		if (err)
+ 			goto error;

target/linux/brcm47xx/patches-2.6.37/031-sb-fix-nvram_get-on-bcm47xx-platform.patch

@@ -0,0 +1,51 @@
+From 99dfec6e793651963ede3c2721b9ff3c81e3aeac Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 27 Nov 2010 14:04:36 +0100
+Subject: [PATCH 6/6] sb: fix nvram_get on bcm47xx platform
+
+The nvram_get function was never in the mainline kernel, it only
+existed in an external OpenWrt patch. Use nvram_getenv function, which
+is in mainline and use an include instead of an extra function
+declaration.
+et0macaddr contains the mac address in text from like
+00:11:22:33:44:55. We have to parse it before adding it into macaddr.
+
+nvram_parse_macaddr will be merged into asm/mach-bcm47xx/nvram.h though
+the MIPS git tree and will be available soon. It will not build now
+without nvram_parse_macaddr, but it haven't done before.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ include/linux/ssb/ssb_driver_gige.h |   17 +++++++++++------
+ 1 files changed, 11 insertions(+), 6 deletions(-)
+
+--- a/include/linux/ssb/ssb_driver_gige.h
++++ b/include/linux/ssb/ssb_driver_gige.h
+@@ -96,16 +96,21 @@ static inline bool ssb_gige_must_flush_p
+ 	return 0;
+ }
+ 
+-extern char * nvram_get(const char *name);
++#ifdef CONFIG_BCM47XX
++#include <asm/mach-bcm47xx/nvram.h>
+ /* Get the device MAC address */
+ static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+ {
+-#ifdef CONFIG_BCM47XX
+-	char *res = nvram_get("et0macaddr");
+-	if (res)
+-		memcpy(macaddr, res, 6);
+-#endif
++	char buf[20];
++	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
++		return;
++	nvram_parse_macaddr(buf, macaddr);
+ }
++#else
++static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
++{
++}
++#endif
+ 
+ extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+ 					  struct pci_dev *pdev);

target/linux/brcm47xx/patches-2.6.37/210-b44_phy_fix.patch

@@ -1,35 +1,6 @@
 --- a/drivers/net/b44.c
 +++ b/drivers/net/b44.c
-@@ -381,11 +381,12 @@ static void b44_set_flow_ctrl(struct b44
+@@ -411,10 +411,41 @@ static void b44_wap54g10_workaround(stru
- 	__b44_set_flow_ctrl(bp, pause_enab);
- }
- 
--#ifdef SSB_DRIVER_MIPS
--extern char *nvram_get(char *name);
-+#ifdef CONFIG_BCM47XX
-+
-+#include <asm/mach-bcm47xx/nvram.h>
- static void b44_wap54g10_workaround(struct b44 *bp)
- {
--	const char *str;
-+	char buf[20];
- 	u32 val;
- 	int err;
- 
-@@ -394,10 +395,9 @@ static void b44_wap54g10_workaround(stru
- 	 * see https://dev.openwrt.org/ticket/146
- 	 * check and reset bit "isolate"
- 	 */
--	str = nvram_get("boardnum");
--	if (!str)
-+	if (nvram_getenv("boardnum", buf, sizeof(buf)) > 0)
- 		return;
--	if (simple_strtoul(str, NULL, 0) == 2) {
-+	if (simple_strtoul(buf, NULL, 0) == 2) {
- 		err = __b44_readphy(bp, 0, MII_BMCR, &val);
- 		if (err)
- 			goto error;
-@@ -412,10 +412,43 @@ static void b44_wap54g10_workaround(stru
  error:
  	pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
  }
@@ -60,9 +31,7 @@
 +	}
 +	return;
 +}
-+
  #else
-+
  static inline void b44_wap54g10_workaround(struct b44 *bp)
  {
  }
@@ -73,7 +42,7 @@
  #endif
  
  static int b44_setup_phy(struct b44 *bp)
-@@ -424,6 +457,7 @@ static int b44_setup_phy(struct b44 *bp)
+@@ -423,6 +454,7 @@ static int b44_setup_phy(struct b44 *bp)
  	int err;
  
  	b44_wap54g10_workaround(bp);
@@ -81,7 +50,7 @@
  
  	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
  		return 0;
-@@ -2089,6 +2123,8 @@ static int __devinit b44_get_invariants(
+@@ -2088,6 +2120,8 @@ static int __devinit b44_get_invariants(
  	 * valid PHY address. */
  	bp->phy_addr &= 0x1F;
  

target/linux/brcm47xx/patches-2.6.37/400-arch-bcm47xx.patch

@@ -33,7 +33,7 @@
 +EXPORT_SYMBOL(nvram_get);
 --- a/arch/mips/bcm47xx/setup.c
 +++ b/arch/mips/bcm47xx/setup.c
-@@ -238,3 +238,20 @@ void __init plat_mem_setup(void)
+@@ -215,3 +215,20 @@ void __init plat_mem_setup(void)
  	_machine_halt = bcm47xx_machine_halt;
  	pm_power_off = bcm47xx_machine_halt;
  }

target/linux/brcm47xx/patches-2.6.37/920-cache-wround.patch

@@ -34,7 +34,7 @@
  
 --- a/arch/mips/mm/tlbex.c
 +++ b/arch/mips/mm/tlbex.c
-@@ -712,6 +712,9 @@ build_get_pgde32(u32 **p, unsigned int t
+@@ -711,6 +711,9 @@ build_get_pgde32(u32 **p, unsigned int t
  #endif
  	uasm_i_addu(p, ptr, tmp, ptr);
  #else
@@ -44,7 +44,7 @@
  	UASM_i_LA_mostly(p, ptr, pgdc);
  #endif
  	uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
-@@ -873,12 +876,12 @@ static void __cpuinit build_r4000_tlb_re
+@@ -872,12 +875,12 @@ static void __cpuinit build_r4000_tlb_re
  		/* No need for uasm_i_nop */
  	}
  
@@ -60,7 +60,7 @@
  	build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
  #endif
  
-@@ -890,6 +893,9 @@ static void __cpuinit build_r4000_tlb_re
+@@ -889,6 +892,9 @@ static void __cpuinit build_r4000_tlb_re
  	build_update_entries(&p, K0, K1);
  	build_tlb_write_entry(&p, &l, &r, tlb_random);
  	uasm_l_leave(&l, p);
@@ -70,7 +70,7 @@
  	uasm_i_eret(&p); /* return from trap */
  
  #ifdef CONFIG_HUGETLB_PAGE
-@@ -1326,12 +1332,12 @@ build_r4000_tlbchange_handler_head(u32 *
+@@ -1325,12 +1331,12 @@ build_r4000_tlbchange_handler_head(u32 *
  				   struct uasm_reloc **r, unsigned int pte,
  				   unsigned int ptr)
  {
@@ -86,7 +86,7 @@
  	build_get_pgde32(p, pte, ptr); /* get pgd in ptr */
  #endif
  
-@@ -1368,6 +1374,9 @@ build_r4000_tlbchange_handler_tail(u32 *
+@@ -1367,6 +1373,9 @@ build_r4000_tlbchange_handler_tail(u32 *
  	build_update_entries(p, tmp, ptr);
  	build_tlb_write_entry(p, l, r, tlb_indexed);
  	uasm_l_leave(l, *p);

target/linux/brcm47xx/patches-2.6.37/921-bootargs_fix.patch

@@ -1,11 +0,0 @@
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -84,7 +84,7 @@ static void str2eaddr(char *str, char *d
- static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
- {
- 	char buf[100];
--	u32 boardflags;
-+	u32 uninitialized_var(boardflags);
- 
- 	memset(sprom, 0, sizeof(struct ssb_sprom));
- 

target/linux/brcm47xx/patches-2.6.37/950-sbb-sysfs-files.patch

@@ -1,14 +1,30 @@
+From 3cfa0a9d4b4cc30ec735c5c9535ff493bae24d08 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 27 Nov 2010 18:14:23 +0100
+Subject: [PATCH] ssb: Add sysfs attributes to ssb devices
+
+Make it possible to read out the attributes, till now only show on
+dmesg, through sysfs.
+
+This patch was some time in OpenWrt.
+
+Signed-off-by: Bernhard Loos <bernhardloos@googlemail.com>
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/ssb/main.c |   30 ++++++++++++++++++++++++++++++
+ 1 files changed, 30 insertions(+), 0 deletions(-)
+
 --- a/drivers/ssb/main.c
 +++ b/drivers/ssb/main.c
-@@ -383,6 +383,34 @@ static int ssb_device_uevent(struct devi
+@@ -383,6 +383,35 @@ static int ssb_device_uevent(struct devi
  			     ssb_dev->id.revision);
  }
  
-+#define ssb_config_attr(attrib, field, format_string)					\
++#define ssb_config_attr(attrib, field, format_string) \
-+static ssize_t													\
++static ssize_t \
 +attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \
-+{																\
++{ \
-+	return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field);		\
++	return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \
 +}
 +
 +ssb_config_attr(core_num, core_index, "%u\n")
@@ -19,7 +35,8 @@
 +static ssize_t
 +name_show(struct device *dev, struct device_attribute *attr, char *buf)
 +{
-+	return sprintf(buf, "%s\n", ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
++	return sprintf(buf, "%s\n",
++		       ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
 +}
 +
 +static struct device_attribute ssb_device_attrs[] = {
@@ -35,7 +52,7 @@
  static struct bus_type ssb_bustype = {
  	.name		= "ssb",
  	.match		= ssb_bus_match,
-@@ -392,6 +420,7 @@ static struct bus_type ssb_bustype = {
+@@ -392,6 +421,7 @@ static struct bus_type ssb_bustype = {
  	.suspend	= ssb_device_suspend,
  	.resume		= ssb_device_resume,
  	.uevent		= ssb_device_uevent,