[s3c24xx] bump to 2.6.30-rc6

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15918 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmix.h

@@ -0,0 +1,233 @@
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This file contains extensions of the WMI protocol specified in the
+ * Wireless Module Interface (WMI).  It includes definitions of all
+ * extended commands and events.  Extensions include useful commands
+ * that are not directly related to wireless activities.  They may
+ * be hardware-specific, and they might not be supported on all
+ * implementations.
+ *
+ * Extended WMIX commands are encapsulated in a WMI message with
+ * cmd=WMI_EXTENSION_CMD.
+ *
+ */
+
+#ifndef _WMIX_H_
+#define _WMIX_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef ATH_TARGET
+#include "athstartpack.h"
+#endif
+
+#include "dbglog.h"
+
+/*
+ * Extended WMI commands are those that are needed during wireless
+ * operation, but which are not really wireless commands.  This allows,
+ * for instance, platform-specific commands.  Extended WMI commands are
+ * embedded in a WMI command message with WMI_COMMAND_ID=WMI_EXTENSION_CMDID.
+ * Extended WMI events are similarly embedded in a WMI event message with
+ * WMI_EVENT_ID=WMI_EXTENSION_EVENTID.
+ */
+typedef PREPACK struct {
+    A_UINT32    commandId;
+} POSTPACK WMIX_CMD_HDR;
+
+typedef enum {
+    WMIX_DSETOPEN_REPLY_CMDID           = 0x2001,
+    WMIX_DSETDATA_REPLY_CMDID,
+    WMIX_GPIO_OUTPUT_SET_CMDID,
+    WMIX_GPIO_INPUT_GET_CMDID,
+    WMIX_GPIO_REGISTER_SET_CMDID,
+    WMIX_GPIO_REGISTER_GET_CMDID,
+    WMIX_GPIO_INTR_ACK_CMDID,
+    WMIX_HB_CHALLENGE_RESP_CMDID,
+    WMIX_DBGLOG_CFG_MODULE_CMDID,
+} WMIX_COMMAND_ID;
+
+typedef enum {
+    WMIX_DSETOPENREQ_EVENTID            = 0x3001,
+    WMIX_DSETCLOSE_EVENTID,
+    WMIX_DSETDATAREQ_EVENTID,
+    WMIX_GPIO_INTR_EVENTID,
+    WMIX_GPIO_DATA_EVENTID,
+    WMIX_GPIO_ACK_EVENTID,
+    WMIX_HB_CHALLENGE_RESP_EVENTID,
+    WMIX_DBGLOG_EVENTID,
+} WMIX_EVENT_ID;
+
+/*
+ * =============DataSet support=================
+ */
+
+/*
+ * WMIX_DSETOPENREQ_EVENTID
+ * DataSet Open Request Event
+ */
+typedef PREPACK struct {
+    A_UINT32 dset_id;
+    A_UINT32 targ_dset_handle;  /* echo'ed, not used by Host, */
+    A_UINT32 targ_reply_fn;     /* echo'ed, not used by Host, */
+    A_UINT32 targ_reply_arg;    /* echo'ed, not used by Host, */
+} POSTPACK WMIX_DSETOPENREQ_EVENT;
+
+/*
+ * WMIX_DSETCLOSE_EVENTID
+ * DataSet Close Event
+ */
+typedef PREPACK struct {
+    A_UINT32 access_cookie;
+} POSTPACK WMIX_DSETCLOSE_EVENT;
+
+/*
+ * WMIX_DSETDATAREQ_EVENTID
+ * DataSet Data Request Event
+ */
+typedef PREPACK struct {
+    A_UINT32 access_cookie;
+    A_UINT32 offset;
+    A_UINT32 length;
+    A_UINT32 targ_buf;         /* echo'ed, not used by Host, */
+    A_UINT32 targ_reply_fn;    /* echo'ed, not used by Host, */
+    A_UINT32 targ_reply_arg;   /* echo'ed, not used by Host, */
+} POSTPACK WMIX_DSETDATAREQ_EVENT;
+
+typedef PREPACK struct {
+    A_UINT32              status;
+    A_UINT32              targ_dset_handle;
+    A_UINT32              targ_reply_fn;
+    A_UINT32              targ_reply_arg;
+    A_UINT32              access_cookie;
+    A_UINT32              size;
+    A_UINT32              version;
+} POSTPACK WMIX_DSETOPEN_REPLY_CMD;
+
+typedef PREPACK struct {
+    A_UINT32              status;
+    A_UINT32              targ_buf;
+    A_UINT32              targ_reply_fn;
+    A_UINT32              targ_reply_arg;
+    A_UINT32              length;
+    A_UINT8               buf[1];
+} POSTPACK WMIX_DSETDATA_REPLY_CMD;
+
+
+/*
+ * =============GPIO support=================
+ * All masks are 18-bit masks with bit N operating on GPIO pin N.
+ */
+
+#include "gpio.h"
+
+/*
+ * Set GPIO pin output state.
+ * In order for output to be driven, a pin must be enabled for output.
+ * This can be done during initialization through the GPIO Configuration
+ * DataSet, or during operation with the enable_mask.
+ *
+ * If a request is made to simultaneously set/clear or set/disable or
+ * clear/disable or disable/enable, results are undefined.
+ */
+typedef PREPACK struct {
+    A_UINT32              set_mask;             /* pins to set */
+    A_UINT32              clear_mask;           /* pins to clear */
+    A_UINT32              enable_mask;          /* pins to enable for output */
+    A_UINT32              disable_mask;         /* pins to disable/tristate */
+} POSTPACK WMIX_GPIO_OUTPUT_SET_CMD;
+
+/*
+ * Set a GPIO register.  For debug/exceptional cases.
+ * Values for gpioreg_id are GPIO_REGISTER_IDs, defined in a
+ * platform-dependent header.
+ */
+typedef PREPACK struct {
+    A_UINT32              gpioreg_id;           /* GPIO register ID */
+    A_UINT32              value;                /* value to write */
+} POSTPACK WMIX_GPIO_REGISTER_SET_CMD;
+
+/* Get a GPIO register.  For debug/exceptional cases. */
+typedef PREPACK struct {
+    A_UINT32              gpioreg_id;           /* GPIO register to read */
+} POSTPACK WMIX_GPIO_REGISTER_GET_CMD;
+
+/*
+ * Host acknowledges and re-arms GPIO interrupts.  A single
+ * message should be used to acknowledge all interrupts that
+ * were delivered in an earlier WMIX_GPIO_INTR_EVENT message.
+ */
+typedef PREPACK struct {
+    A_UINT32              ack_mask;             /* interrupts to acknowledge */
+} POSTPACK WMIX_GPIO_INTR_ACK_CMD;
+
+/*
+ * Target informs Host of GPIO interrupts that have ocurred since the
+ * last WMIX_GIPO_INTR_ACK_CMD was received.  Additional information --
+ * the current GPIO input values is provided -- in order to support
+ * use of a GPIO interrupt as a Data Valid signal for other GPIO pins.
+ */
+typedef PREPACK struct {
+    A_UINT32              intr_mask;            /* pending GPIO interrupts */
+    A_UINT32              input_values;         /* recent GPIO input values */
+} POSTPACK WMIX_GPIO_INTR_EVENT;
+
+/*
+ * Target responds to Host's earlier WMIX_GPIO_INPUT_GET_CMDID request
+ * using a GPIO_DATA_EVENT with
+ *   value set to the mask of GPIO pin inputs and
+ *   reg_id set to GPIO_ID_NONE
+ *
+ *
+ * Target responds to Hosts's earlier WMIX_GPIO_REGISTER_GET_CMDID request
+ * using a GPIO_DATA_EVENT with
+ *   value set to the value of the requested register and
+ *   reg_id identifying the register (reflects the original request)
+ * NB: reg_id supports the future possibility of unsolicited
+ * WMIX_GPIO_DATA_EVENTs (for polling GPIO input), and it may
+ * simplify Host GPIO support.
+ */
+typedef PREPACK struct {
+    A_UINT32              value;
+    A_UINT32              reg_id;
+} POSTPACK WMIX_GPIO_DATA_EVENT;
+
+/*
+ * =============Error Detection support=================
+ */
+
+/*
+ * WMIX_HB_CHALLENGE_RESP_CMDID
+ * Heartbeat Challenge Response command
+ */
+typedef PREPACK struct {
+    A_UINT32              cookie;
+    A_UINT32              source;
+} POSTPACK WMIX_HB_CHALLENGE_RESP_CMD;
+
+/*
+ * WMIX_HB_CHALLENGE_RESP_EVENTID
+ * Heartbeat Challenge Response Event
+ */
+#define WMIX_HB_CHALLENGE_RESP_EVENT WMIX_HB_CHALLENGE_RESP_CMD
+
+typedef PREPACK struct {
+    struct dbglog_config_s config;
+} POSTPACK WMIX_DBGLOG_CFG_MODULE_CMD;
+
+#ifndef ATH_TARGET
+#include "athendpack.h"
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _WMIX_H_ */