Since the switch to netifd, proto handlers may always set the defaultroute
and provide dns server addresses, netifd will decide in the generic code
path whether the announced values are masked or not.
Additionally protocol handlers should not modify the routing tables themselves
and prevent any launched services from doing so.
Remove the additional defaultroute and peerdns option handling from the ppp.sh
protocol handler and rely on netifd to mask or not mask the values.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34536 3c298f89-4303-0410-b956-a3cf2f4a3e73
At present, if you select the iconv utility it will be built but not
installed. This patch adds the clauses necessary to the Makefile to
actually install iconv.
Signed-off-by: Mike Brady <mikebrady@eircom.net>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34530 3c298f89-4303-0410-b956-a3cf2f4a3e73
Now that we package individual tools as well, the list of ATM tools is
pretty big to deserve its own submenu.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34504 3c298f89-4303-0410-b956-a3cf2f4a3e73
Upstream has a few code cleanups, more eagerly burns sensitive memory and
includes the fix for CVE-2012-0920. Full changelog:
https://matt.ucc.asn.au/dropbear/CHANGES
Local changes:
- Removed PKG_MULTI which is no longer in options.h (even before 2011.54)
- Merged DO_HOST_LOOKUP into 120-openwrt_options.patch
- Removed LD from make opts (now included in TARGET_CONFIGURE_OPTS)
- Removed 400-CVE-2012-0920.patch which is included in 2012.55
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34496 3c298f89-4303-0410-b956-a3cf2f4a3e73
Instead of commenting the inclusion of some binaries, just make them
available using a new package "atm-debug-tools."
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34477 3c298f89-4303-0410-b956-a3cf2f4a3e73
- use comment match to keep track of per-network rules
- setup reflection for any interface which is part of a masqueraded zone, not just "wan"
- delete per-network reflection rules if network is brought down
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34472 3c298f89-4303-0410-b956-a3cf2f4a3e73
Previously only the first macfilter configuration would have been used
on all interfaces. However, the configuration was always done per vif
already. Hence, move the macfilter setup into hostapd.sh where and
create one mac list file per vif.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34470 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mode 'downstream' renamed to 'router'
* mode 'upstream' renamed to 'dhcpv6'
* mode 'relay' added
* cleanups and minor bugfixes in state handling
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34466 3c298f89-4303-0410-b956-a3cf2f4a3e73
In particular, it wants to run before the ntpclient script. Which may
block for a long time attempting to do DNS lookups for NTP servers. In
my case, that would have *worked* if the new device had been added to
teql first, rather than timing out.
This was effectively causing a huge delay between an interface coming
up, and routing actually starting to work.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34442 3c298f89-4303-0410-b956-a3cf2f4a3e73
* The device should get a unique name at the beginning and not wl%d.
* load the nvram just one time into the own buffer, also when there is
more than one device.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34381 3c298f89-4303-0410-b956-a3cf2f4a3e73
Write "delay" and "message" options to their respective files,
allowing Morse code message configuration through UCI.
The delay (dit length) defaults to 150ms (about 8 words per minute,
suitable for beginners).
Signed-off-by: Petr Viktorin <encukou@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34380 3c298f89-4303-0410-b956-a3cf2f4a3e73
Thanks to Frank Meerkötter and Szabolcs Nagy for spotting the issue.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34326 3c298f89-4303-0410-b956-a3cf2f4a3e73
Musl is an alternative C-library, see http://www.musl-libc.org for more infos.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34314 3c298f89-4303-0410-b956-a3cf2f4a3e73
Spotted while building against musl libc.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34312 3c298f89-4303-0410-b956-a3cf2f4a3e73
musl-libc is more strict about missing includes.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34311 3c298f89-4303-0410-b956-a3cf2f4a3e73
Busybox built against musl-libc will choke on these otherwise, besides that
it is more natural to use the filesystem type, then options, then name, then
mountpoint.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34308 3c298f89-4303-0410-b956-a3cf2f4a3e73
Not all libcs have support for tm_gmtoff which is only available for BSD
compatibility, and guarded with __USE_BSD defines, use __tm_gmtoff otherwise.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34307 3c298f89-4303-0410-b956-a3cf2f4a3e73
Don't hide crypo submodules unless crypo-core is selected.
Fixes kmods depending on crypto modules being unselectable
until crypto core is selected (like ext4 on 3.6 or mac80211).
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34298 3c298f89-4303-0410-b956-a3cf2f4a3e73
Some libcs need this header to be explicitely included (e.g: musl)
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34295 3c298f89-4303-0410-b956-a3cf2f4a3e73
We do not use anything from it, and it is not available with all libcs.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34294 3c298f89-4303-0410-b956-a3cf2f4a3e73
libthread_db.so.$(LIBC_SO_VERSION) is only valid for uClibc, (e)glibc just
provides libthread_db.so.1.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34292 3c298f89-4303-0410-b956-a3cf2f4a3e73
due to a small error in the atm-tools package we are not deploying
atmarp/atmarpd but instead the (useless) libtool-wrappers.
Signed-Off-By: Frank Meerkötter <frank@meerkoetter.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34287 3c298f89-4303-0410-b956-a3cf2f4a3e73
[juhosg: move ramips specific stuff into a followup patch]
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34269 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is needed for WiFi to work e.g. on DIR-615 rev.H1.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34268 3c298f89-4303-0410-b956-a3cf2f4a3e73
- Add RD- and DHCPv6-server functionality
- Rework configuration and add example UCI file
- Fix various bugs and be more RFC compliant
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34204 3c298f89-4303-0410-b956-a3cf2f4a3e73
- only wrap package descriptions when outputting to a tty, simplifies parsing descriptions with external utils
- introduce -i (--nocase) flag which makes all matching operations case insensitive
- introduce "find" command which searches package names and descriptions (e.g. opkg -i find "*autoconfig*")
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34202 3c298f89-4303-0410-b956-a3cf2f4a3e73
They were missing the AUTOLOAD directive.
Signed-off-by: Jonh Wendell <jonh.wendell@oiwifi.com.br>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34107 3c298f89-4303-0410-b956-a3cf2f4a3e73
This fixes missing embedded packages if multiple build variants are selected in
the build config, e.g. missing ppp if CONFIG_PACKAGE_ppp=y and
CONFIG_PACKAGE_ppp-multilink=m .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34106 3c298f89-4303-0410-b956-a3cf2f4a3e73
Export bcm963xx_tag.h so mtd can use it without using kernel includes.
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
[jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header
from original location, refresh patches, use a more matching patch
number, port to 3.6]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34103 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch adds a package for the ledtrig-oneshot module, available in
3.6 and later.
[juhosg: change dependency from LINUX_3_6 to !LINUX_3_3]
Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34079 3c298f89-4303-0410-b956-a3cf2f4a3e73
6relayd is an IPv6-tool that relays IPv6-management protocols like router
discovery, neighbor discovery and DHCPv6 so that clients on routed
(non-bridged) interfaces can use the public address prefix, DHCPv6 and
DNS-service of a master interface. This is useful to avoid NAT in chained
IPv6-routers.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34008 3c298f89-4303-0410-b956-a3cf2f4a3e73
gdb can read debug informations in produced binaries with compressed debug sections if gdb is compiled with `zlib'.
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34007 3c298f89-4303-0410-b956-a3cf2f4a3e73
* update the flash driver for bcm47xx to use the stubs already in bcma
* do some misc enhancements to the flash drivers for bcm47xx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33920 3c298f89-4303-0410-b956-a3cf2f4a3e73
Kernel 3.5 started prefixing i2c muxes modules with i2c-mux-, account for that
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33904 3c298f89-4303-0410-b956-a3cf2f4a3e73
With the support for architecture optimized camellia routines, the original
camellia module got renamed to camellia_generic, account for that.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33903 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add an option for building the configs.ko module which provides
kernel configuration via /proc/config.gz
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33865 3c298f89-4303-0410-b956-a3cf2f4a3e73
Two new variables are introduces to many packages, namely PKG_LICENSE and
PKG_LICENSE_FILES - there may be more than one license applied to packages,
and these are listed in the PKG_LICENSE variable and separated by spaces.
All relevant license files are also added to the PKG_LICENSE_FILES variable,
also space separated.
The licensing metadata is put into the bin/<platform>/packages/Packages file
for later parsing. A script for that is on it's way!
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33861 3c298f89-4303-0410-b956-a3cf2f4a3e73
* add firmware for some more intel wifi cards
* use new firmware for some intel wifi cards
* remove old firmware version for libertas when we also ship a more recent version
* add rt3290.bin for rt2800-pci
* use new firmware version for wl12xx, the old one is not supported by the driver any more
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33854 3c298f89-4303-0410-b956-a3cf2f4a3e73
Both ixp4xx and cns3xxx targets support RFKILL in the kernel.
Also add a RFKILL_GPIO default for kernel config
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33831 3c298f89-4303-0410-b956-a3cf2f4a3e73
